2864 lines
85 KiB
C
2864 lines
85 KiB
C
/* $NetBSD: pciide.c,v 1.58 2000/05/15 08:46:00 bouyer Exp $ */
|
|
|
|
|
|
/*
|
|
* Copyright (c) 1999 Manuel Bouyer.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
|
|
/*
|
|
* Copyright (c) 1996, 1998 Christopher G. Demetriou. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Christopher G. Demetriou
|
|
* for the NetBSD Project.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* PCI IDE controller driver.
|
|
*
|
|
* Author: Christopher G. Demetriou, March 2, 1998 (derived from NetBSD
|
|
* sys/dev/pci/ppb.c, revision 1.16).
|
|
*
|
|
* See "PCI IDE Controller Specification, Revision 1.0 3/4/94" and
|
|
* "Programming Interface for Bus Master IDE Controller, Revision 1.0
|
|
* 5/16/94" from the PCI SIG.
|
|
*
|
|
*/
|
|
|
|
#ifndef WDCDEBUG
|
|
#define WDCDEBUG
|
|
#endif
|
|
|
|
#define DEBUG_DMA 0x01
|
|
#define DEBUG_XFERS 0x02
|
|
#define DEBUG_FUNCS 0x08
|
|
#define DEBUG_PROBE 0x10
|
|
#ifdef WDCDEBUG
|
|
int wdcdebug_pciide_mask = 0;
|
|
#define WDCDEBUG_PRINT(args, level) \
|
|
if (wdcdebug_pciide_mask & (level)) printf args
|
|
#else
|
|
#define WDCDEBUG_PRINT(args, level)
|
|
#endif
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/device.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#include <machine/endian.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/vm_kern.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcidevs.h>
|
|
#include <dev/pci/pciidereg.h>
|
|
#include <dev/pci/pciidevar.h>
|
|
#include <dev/pci/pciide_piix_reg.h>
|
|
#include <dev/pci/pciide_amd_reg.h>
|
|
#include <dev/pci/pciide_apollo_reg.h>
|
|
#include <dev/pci/pciide_cmd_reg.h>
|
|
#include <dev/pci/pciide_cy693_reg.h>
|
|
#include <dev/pci/pciide_sis_reg.h>
|
|
#include <dev/pci/pciide_acer_reg.h>
|
|
#include <dev/pci/pciide_pdc202xx_reg.h>
|
|
|
|
/* inlines for reading/writing 8-bit PCI registers */
|
|
static __inline u_int8_t pciide_pci_read __P((pci_chipset_tag_t, pcitag_t,
|
|
int));
|
|
static __inline void pciide_pci_write __P((pci_chipset_tag_t, pcitag_t,
|
|
int, u_int8_t));
|
|
|
|
static __inline u_int8_t
|
|
pciide_pci_read(pc, pa, reg)
|
|
pci_chipset_tag_t pc;
|
|
pcitag_t pa;
|
|
int reg;
|
|
{
|
|
|
|
return (pci_conf_read(pc, pa, (reg & ~0x03)) >>
|
|
((reg & 0x03) * 8) & 0xff);
|
|
}
|
|
|
|
static __inline void
|
|
pciide_pci_write(pc, pa, reg, val)
|
|
pci_chipset_tag_t pc;
|
|
pcitag_t pa;
|
|
int reg;
|
|
u_int8_t val;
|
|
{
|
|
pcireg_t pcival;
|
|
|
|
pcival = pci_conf_read(pc, pa, (reg & ~0x03));
|
|
pcival &= ~(0xff << ((reg & 0x03) * 8));
|
|
pcival |= (val << ((reg & 0x03) * 8));
|
|
pci_conf_write(pc, pa, (reg & ~0x03), pcival);
|
|
}
|
|
|
|
void default_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
|
|
|
|
void piix_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
|
|
void piix_setup_channel __P((struct channel_softc*));
|
|
void piix3_4_setup_channel __P((struct channel_softc*));
|
|
static u_int32_t piix_setup_idetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
|
|
static u_int32_t piix_setup_idetim_drvs __P((struct ata_drive_datas*));
|
|
static u_int32_t piix_setup_sidetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
|
|
|
|
void amd756_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
|
|
void amd756_setup_channel __P((struct channel_softc*));
|
|
|
|
void apollo_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
|
|
void apollo_setup_channel __P((struct channel_softc*));
|
|
|
|
void cmd_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
|
|
void cmd0643_6_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
|
|
void cmd0643_6_setup_channel __P((struct channel_softc*));
|
|
void cmd_channel_map __P((struct pci_attach_args *,
|
|
struct pciide_softc *, int));
|
|
int cmd_pci_intr __P((void *));
|
|
|
|
void cy693_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
|
|
void cy693_setup_channel __P((struct channel_softc*));
|
|
|
|
void sis_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
|
|
void sis_setup_channel __P((struct channel_softc*));
|
|
|
|
void acer_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
|
|
void acer_setup_channel __P((struct channel_softc*));
|
|
int acer_pci_intr __P((void *));
|
|
|
|
void pdc202xx_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
|
|
void pdc202xx_setup_channel __P((struct channel_softc*));
|
|
int pdc202xx_pci_intr __P((void *));
|
|
|
|
void pciide_channel_dma_setup __P((struct pciide_channel *));
|
|
int pciide_dma_table_setup __P((struct pciide_softc*, int, int));
|
|
int pciide_dma_init __P((void*, int, int, void *, size_t, int));
|
|
void pciide_dma_start __P((void*, int, int));
|
|
int pciide_dma_finish __P((void*, int, int, int));
|
|
void pciide_print_modes __P((struct pciide_channel *));
|
|
|
|
struct pciide_product_desc {
|
|
u_int32_t ide_product;
|
|
int ide_flags;
|
|
const char *ide_name;
|
|
/* map and setup chip, probe drives */
|
|
void (*chip_map) __P((struct pciide_softc*, struct pci_attach_args*));
|
|
};
|
|
|
|
/* Flags for ide_flags */
|
|
#define IDE_PCI_CLASS_OVERRIDE 0x0001 /* accept even if class != pciide */
|
|
|
|
/* Default product description for devices not known from this controller */
|
|
const struct pciide_product_desc default_product_desc = {
|
|
0,
|
|
0,
|
|
"Generic PCI IDE controller",
|
|
default_chip_map,
|
|
};
|
|
|
|
const struct pciide_product_desc pciide_intel_products[] = {
|
|
{ PCI_PRODUCT_INTEL_82092AA,
|
|
0,
|
|
"Intel 82092AA IDE controller",
|
|
default_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82371FB_IDE,
|
|
0,
|
|
"Intel 82371FB IDE controller (PIIX)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82371SB_IDE,
|
|
0,
|
|
"Intel 82371SB IDE Interface (PIIX3)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82371AB_IDE,
|
|
0,
|
|
"Intel 82371AB IDE controller (PIIX4)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82801AA_IDE,
|
|
0,
|
|
"Intel 82801AA IDE Controller (ICH)",
|
|
piix_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_INTEL_82801AB_IDE,
|
|
0,
|
|
"Intel 82801AB IDE Controller (ICH0)",
|
|
piix_chip_map,
|
|
},
|
|
{ 0,
|
|
0,
|
|
NULL,
|
|
}
|
|
};
|
|
|
|
const struct pciide_product_desc pciide_amd_products[] = {
|
|
{ PCI_PRODUCT_AMD_PBC756_IDE,
|
|
0,
|
|
"Advanced Micro Devices AMD756 IDE Controller",
|
|
amd756_chip_map
|
|
},
|
|
{ 0,
|
|
0,
|
|
NULL,
|
|
}
|
|
};
|
|
|
|
const struct pciide_product_desc pciide_cmd_products[] = {
|
|
{ PCI_PRODUCT_CMDTECH_640,
|
|
0,
|
|
"CMD Technology PCI0640",
|
|
cmd_chip_map
|
|
},
|
|
{ PCI_PRODUCT_CMDTECH_643,
|
|
0,
|
|
"CMD Technology PCI0643",
|
|
cmd0643_6_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_CMDTECH_646,
|
|
0,
|
|
"CMD Technology PCI0646",
|
|
cmd0643_6_chip_map,
|
|
},
|
|
{ 0,
|
|
0,
|
|
NULL,
|
|
}
|
|
};
|
|
|
|
const struct pciide_product_desc pciide_via_products[] = {
|
|
{ PCI_PRODUCT_VIATECH_VT82C586_IDE,
|
|
0,
|
|
"VIA Technologies VT82C586 (Apollo VP) IDE Controller",
|
|
apollo_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_VIATECH_VT82C586A_IDE,
|
|
0,
|
|
"VIA Technologies VT82C586A IDE Controller",
|
|
apollo_chip_map,
|
|
},
|
|
{ 0,
|
|
0,
|
|
NULL,
|
|
}
|
|
};
|
|
|
|
const struct pciide_product_desc pciide_cypress_products[] = {
|
|
{ PCI_PRODUCT_CONTAQ_82C693,
|
|
0,
|
|
"Contaq Microsystems CY82C693 IDE Controller",
|
|
cy693_chip_map,
|
|
},
|
|
{ 0,
|
|
0,
|
|
NULL,
|
|
}
|
|
};
|
|
|
|
const struct pciide_product_desc pciide_sis_products[] = {
|
|
{ PCI_PRODUCT_SIS_5597_IDE,
|
|
0,
|
|
"Silicon Integrated System 5597/5598 IDE controller",
|
|
sis_chip_map,
|
|
},
|
|
{ 0,
|
|
0,
|
|
NULL,
|
|
}
|
|
};
|
|
|
|
const struct pciide_product_desc pciide_acer_products[] = {
|
|
{ PCI_PRODUCT_ALI_M5229,
|
|
0,
|
|
"Acer Labs M5229 UDMA IDE Controller",
|
|
acer_chip_map,
|
|
},
|
|
{ 0,
|
|
0,
|
|
NULL,
|
|
}
|
|
};
|
|
|
|
const struct pciide_product_desc pciide_promise_products[] = {
|
|
{ PCI_PRODUCT_PROMISE_ULTRA33,
|
|
IDE_PCI_CLASS_OVERRIDE,
|
|
"Promise Ultra33/ATA Bus Master IDE Accelerator",
|
|
pdc202xx_chip_map,
|
|
},
|
|
{ PCI_PRODUCT_PROMISE_ULTRA66,
|
|
IDE_PCI_CLASS_OVERRIDE,
|
|
"Promise Ultra66/ATA Bus Master IDE Accelerator",
|
|
pdc202xx_chip_map,
|
|
},
|
|
{ 0,
|
|
0,
|
|
NULL,
|
|
}
|
|
};
|
|
|
|
struct pciide_vendor_desc {
|
|
u_int32_t ide_vendor;
|
|
const struct pciide_product_desc *ide_products;
|
|
};
|
|
|
|
const struct pciide_vendor_desc pciide_vendors[] = {
|
|
{ PCI_VENDOR_INTEL, pciide_intel_products },
|
|
{ PCI_VENDOR_CMDTECH, pciide_cmd_products },
|
|
{ PCI_VENDOR_VIATECH, pciide_via_products },
|
|
{ PCI_VENDOR_CONTAQ, pciide_cypress_products },
|
|
{ PCI_VENDOR_SIS, pciide_sis_products },
|
|
{ PCI_VENDOR_ALI, pciide_acer_products },
|
|
{ PCI_VENDOR_PROMISE, pciide_promise_products },
|
|
{ PCI_VENDOR_AMD, pciide_amd_products },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
/* options passed via the 'flags' config keyword */
|
|
#define PCIIDE_OPTIONS_DMA 0x01
|
|
|
|
int pciide_match __P((struct device *, struct cfdata *, void *));
|
|
void pciide_attach __P((struct device *, struct device *, void *));
|
|
|
|
struct cfattach pciide_ca = {
|
|
sizeof(struct pciide_softc), pciide_match, pciide_attach
|
|
};
|
|
int pciide_chipen __P((struct pciide_softc *, struct pci_attach_args *));
|
|
int pciide_mapregs_compat __P(( struct pci_attach_args *,
|
|
struct pciide_channel *, int, bus_size_t *, bus_size_t*));
|
|
int pciide_mapregs_native __P((struct pci_attach_args *,
|
|
struct pciide_channel *, bus_size_t *, bus_size_t *,
|
|
int (*pci_intr) __P((void *))));
|
|
void pciide_mapreg_dma __P((struct pciide_softc *,
|
|
struct pci_attach_args *));
|
|
int pciide_chansetup __P((struct pciide_softc *, int, pcireg_t));
|
|
void pciide_mapchan __P((struct pci_attach_args *,
|
|
struct pciide_channel *, pcireg_t, bus_size_t *, bus_size_t *,
|
|
int (*pci_intr) __P((void *))));
|
|
int pciiide_chan_candisable __P((struct pciide_channel *));
|
|
void pciide_map_compat_intr __P(( struct pci_attach_args *,
|
|
struct pciide_channel *, int, int));
|
|
int pciide_print __P((void *, const char *pnp));
|
|
int pciide_compat_intr __P((void *));
|
|
int pciide_pci_intr __P((void *));
|
|
const struct pciide_product_desc* pciide_lookup_product __P((u_int32_t));
|
|
|
|
const struct pciide_product_desc *
|
|
pciide_lookup_product(id)
|
|
u_int32_t id;
|
|
{
|
|
const struct pciide_product_desc *pp;
|
|
const struct pciide_vendor_desc *vp;
|
|
|
|
for (vp = pciide_vendors; vp->ide_products != NULL; vp++)
|
|
if (PCI_VENDOR(id) == vp->ide_vendor)
|
|
break;
|
|
|
|
if ((pp = vp->ide_products) == NULL)
|
|
return NULL;
|
|
|
|
for (; pp->ide_name != NULL; pp++)
|
|
if (PCI_PRODUCT(id) == pp->ide_product)
|
|
break;
|
|
|
|
if (pp->ide_name == NULL)
|
|
return NULL;
|
|
return pp;
|
|
}
|
|
|
|
int
|
|
pciide_match(parent, match, aux)
|
|
struct device *parent;
|
|
struct cfdata *match;
|
|
void *aux;
|
|
{
|
|
struct pci_attach_args *pa = aux;
|
|
const struct pciide_product_desc *pp;
|
|
|
|
/*
|
|
* Check the ID register to see that it's a PCI IDE controller.
|
|
* If it is, we assume that we can deal with it; it _should_
|
|
* work in a standardized way...
|
|
*/
|
|
if (PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE &&
|
|
PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Some controllers (e.g. promise Utra-33) don't claim to be PCI IDE
|
|
* controllers. Let see if we can deal with it anyway.
|
|
*/
|
|
pp = pciide_lookup_product(pa->pa_id);
|
|
if (pp && (pp->ide_flags & IDE_PCI_CLASS_OVERRIDE)) {
|
|
return (1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
pciide_attach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct pci_attach_args *pa = aux;
|
|
pci_chipset_tag_t pc = pa->pa_pc;
|
|
pcitag_t tag = pa->pa_tag;
|
|
struct pciide_softc *sc = (struct pciide_softc *)self;
|
|
pcireg_t csr;
|
|
char devinfo[256];
|
|
const char *displaydev;
|
|
|
|
sc->sc_pp = pciide_lookup_product(pa->pa_id);
|
|
if (sc->sc_pp == NULL) {
|
|
sc->sc_pp = &default_product_desc;
|
|
pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo);
|
|
displaydev = devinfo;
|
|
} else
|
|
displaydev = sc->sc_pp->ide_name;
|
|
|
|
printf(": %s (rev. 0x%02x)\n", displaydev, PCI_REVISION(pa->pa_class));
|
|
|
|
sc->sc_pc = pa->pa_pc;
|
|
sc->sc_tag = pa->pa_tag;
|
|
#ifdef WDCDEBUG
|
|
if (wdcdebug_pciide_mask & DEBUG_PROBE)
|
|
pci_conf_print(sc->sc_pc, sc->sc_tag, NULL);
|
|
#endif
|
|
|
|
sc->sc_pp->chip_map(sc, pa);
|
|
|
|
if (sc->sc_dma_ok) {
|
|
csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
|
|
csr |= PCI_COMMAND_MASTER_ENABLE;
|
|
pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr);
|
|
}
|
|
WDCDEBUG_PRINT(("pciide: command/status register=%x\n",
|
|
pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG)), DEBUG_PROBE);
|
|
}
|
|
|
|
/* tell wether the chip is enabled or not */
|
|
int
|
|
pciide_chipen(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
pcireg_t csr;
|
|
if ((pa->pa_flags & PCI_FLAGS_IO_ENABLED) == 0) {
|
|
csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
|
|
PCI_COMMAND_STATUS_REG);
|
|
printf("%s: device disabled (at %s)\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname,
|
|
(csr & PCI_COMMAND_IO_ENABLE) == 0 ?
|
|
"device" : "bridge");
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
pciide_mapregs_compat(pa, cp, compatchan, cmdsizep, ctlsizep)
|
|
struct pci_attach_args *pa;
|
|
struct pciide_channel *cp;
|
|
int compatchan;
|
|
bus_size_t *cmdsizep, *ctlsizep;
|
|
{
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
struct channel_softc *wdc_cp = &cp->wdc_channel;
|
|
|
|
cp->compat = 1;
|
|
*cmdsizep = PCIIDE_COMPAT_CMD_SIZE;
|
|
*ctlsizep = PCIIDE_COMPAT_CTL_SIZE;
|
|
|
|
wdc_cp->cmd_iot = pa->pa_iot;
|
|
if (bus_space_map(wdc_cp->cmd_iot, PCIIDE_COMPAT_CMD_BASE(compatchan),
|
|
PCIIDE_COMPAT_CMD_SIZE, 0, &wdc_cp->cmd_ioh) != 0) {
|
|
printf("%s: couldn't map %s channel cmd regs\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
return (0);
|
|
}
|
|
|
|
wdc_cp->ctl_iot = pa->pa_iot;
|
|
if (bus_space_map(wdc_cp->ctl_iot, PCIIDE_COMPAT_CTL_BASE(compatchan),
|
|
PCIIDE_COMPAT_CTL_SIZE, 0, &wdc_cp->ctl_ioh) != 0) {
|
|
printf("%s: couldn't map %s channel ctl regs\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh,
|
|
PCIIDE_COMPAT_CMD_SIZE);
|
|
return (0);
|
|
}
|
|
|
|
return (1);
|
|
}
|
|
|
|
int
|
|
pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep, pci_intr)
|
|
struct pci_attach_args * pa;
|
|
struct pciide_channel *cp;
|
|
bus_size_t *cmdsizep, *ctlsizep;
|
|
int (*pci_intr) __P((void *));
|
|
{
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
struct channel_softc *wdc_cp = &cp->wdc_channel;
|
|
const char *intrstr;
|
|
pci_intr_handle_t intrhandle;
|
|
|
|
cp->compat = 0;
|
|
|
|
if (sc->sc_pci_ih == NULL) {
|
|
if (pci_intr_map(pa->pa_pc, pa->pa_intrtag, pa->pa_intrpin,
|
|
pa->pa_intrline, &intrhandle) != 0) {
|
|
printf("%s: couldn't map native-PCI interrupt\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
return 0;
|
|
}
|
|
intrstr = pci_intr_string(pa->pa_pc, intrhandle);
|
|
sc->sc_pci_ih = pci_intr_establish(pa->pa_pc,
|
|
intrhandle, IPL_BIO, pci_intr, sc);
|
|
if (sc->sc_pci_ih != NULL) {
|
|
printf("%s: using %s for native-PCI interrupt\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname,
|
|
intrstr ? intrstr : "unknown interrupt");
|
|
} else {
|
|
printf("%s: couldn't establish native-PCI interrupt",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
if (intrstr != NULL)
|
|
printf(" at %s", intrstr);
|
|
printf("\n");
|
|
return 0;
|
|
}
|
|
}
|
|
cp->ih = sc->sc_pci_ih;
|
|
if (pci_mapreg_map(pa, PCIIDE_REG_CMD_BASE(wdc_cp->channel),
|
|
PCI_MAPREG_TYPE_IO, 0,
|
|
&wdc_cp->cmd_iot, &wdc_cp->cmd_ioh, NULL, cmdsizep) != 0) {
|
|
printf("%s: couldn't map %s channel cmd regs\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
return 0;
|
|
}
|
|
|
|
if (pci_mapreg_map(pa, PCIIDE_REG_CTL_BASE(wdc_cp->channel),
|
|
PCI_MAPREG_TYPE_IO, 0,
|
|
&wdc_cp->ctl_iot, &wdc_cp->ctl_ioh, NULL, ctlsizep) != 0) {
|
|
printf("%s: couldn't map %s channel ctl regs\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, *cmdsizep);
|
|
return 0;
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
void
|
|
pciide_mapreg_dma(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
/*
|
|
* Map DMA registers
|
|
*
|
|
* Note that sc_dma_ok is the right variable to test to see if
|
|
* DMA can be done. If the interface doesn't support DMA,
|
|
* sc_dma_ok will never be non-zero. If the DMA regs couldn't
|
|
* be mapped, it'll be zero. I.e., sc_dma_ok will only be
|
|
* non-zero if the interface supports DMA and the registers
|
|
* could be mapped.
|
|
*
|
|
* XXX Note that despite the fact that the Bus Master IDE specs
|
|
* XXX say that "The bus master IDE function uses 16 bytes of IO
|
|
* XXX space," some controllers (at least the United
|
|
* XXX Microelectronics UM8886BF) place it in memory space.
|
|
* XXX eventually, we should probably read the register and check
|
|
* XXX which type it is. Either that or 'quirk' certain devices.
|
|
*/
|
|
sc->sc_dma_ok = (pci_mapreg_map(pa,
|
|
PCIIDE_REG_BUS_MASTER_DMA, PCI_MAPREG_TYPE_IO, 0,
|
|
&sc->sc_dma_iot, &sc->sc_dma_ioh, NULL, NULL) == 0);
|
|
sc->sc_dmat = pa->pa_dmat;
|
|
if (sc->sc_dma_ok == 0) {
|
|
printf(", but unused (couldn't map registers)");
|
|
} else {
|
|
sc->sc_wdcdev.dma_arg = sc;
|
|
sc->sc_wdcdev.dma_init = pciide_dma_init;
|
|
sc->sc_wdcdev.dma_start = pciide_dma_start;
|
|
sc->sc_wdcdev.dma_finish = pciide_dma_finish;
|
|
}
|
|
}
|
|
int
|
|
pciide_compat_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct pciide_channel *cp = arg;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
/* should only be called for a compat channel */
|
|
if (cp->compat == 0)
|
|
panic("pciide compat intr called for non-compat chan %p\n", cp);
|
|
#endif
|
|
return (wdcintr(&cp->wdc_channel));
|
|
}
|
|
|
|
int
|
|
pciide_pci_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct pciide_softc *sc = arg;
|
|
struct pciide_channel *cp;
|
|
struct channel_softc *wdc_cp;
|
|
int i, rv, crv;
|
|
|
|
rv = 0;
|
|
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
|
|
cp = &sc->pciide_channels[i];
|
|
wdc_cp = &cp->wdc_channel;
|
|
|
|
/* If a compat channel skip. */
|
|
if (cp->compat)
|
|
continue;
|
|
/* if this channel not waiting for intr, skip */
|
|
if ((wdc_cp->ch_flags & WDCF_IRQ_WAIT) == 0)
|
|
continue;
|
|
|
|
crv = wdcintr(wdc_cp);
|
|
if (crv == 0)
|
|
; /* leave rv alone */
|
|
else if (crv == 1)
|
|
rv = 1; /* claim the intr */
|
|
else if (rv == 0) /* crv should be -1 in this case */
|
|
rv = crv; /* if we've done no better, take it */
|
|
}
|
|
return (rv);
|
|
}
|
|
|
|
void
|
|
pciide_channel_dma_setup(cp)
|
|
struct pciide_channel *cp;
|
|
{
|
|
int drive;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
struct ata_drive_datas *drvp;
|
|
|
|
for (drive = 0; drive < 2; drive++) {
|
|
drvp = &cp->wdc_channel.ch_drive[drive];
|
|
/* If no drive, skip */
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
/* setup DMA if needed */
|
|
if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
|
|
(drvp->drive_flags & DRIVE_UDMA) == 0) ||
|
|
sc->sc_dma_ok == 0) {
|
|
drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
|
|
continue;
|
|
}
|
|
if (pciide_dma_table_setup(sc, cp->wdc_channel.channel, drive)
|
|
!= 0) {
|
|
/* Abort DMA setup */
|
|
drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
|
|
continue;
|
|
}
|
|
}
|
|
}
|
|
|
|
int
|
|
pciide_dma_table_setup(sc, channel, drive)
|
|
struct pciide_softc *sc;
|
|
int channel, drive;
|
|
{
|
|
bus_dma_segment_t seg;
|
|
int error, rseg;
|
|
const bus_size_t dma_table_size =
|
|
sizeof(struct idedma_table) * NIDEDMA_TABLES;
|
|
struct pciide_dma_maps *dma_maps =
|
|
&sc->pciide_channels[channel].dma_maps[drive];
|
|
|
|
/* If table was already allocated, just return */
|
|
if (dma_maps->dma_table)
|
|
return 0;
|
|
|
|
/* Allocate memory for the DMA tables and map it */
|
|
if ((error = bus_dmamem_alloc(sc->sc_dmat, dma_table_size,
|
|
IDEDMA_TBL_ALIGN, IDEDMA_TBL_ALIGN, &seg, 1, &rseg,
|
|
BUS_DMA_NOWAIT)) != 0) {
|
|
printf("%s:%d: unable to allocate table DMA for "
|
|
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
|
|
channel, drive, error);
|
|
return error;
|
|
}
|
|
if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
|
|
dma_table_size,
|
|
(caddr_t *)&dma_maps->dma_table,
|
|
BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
|
|
printf("%s:%d: unable to map table DMA for"
|
|
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
|
|
channel, drive, error);
|
|
return error;
|
|
}
|
|
WDCDEBUG_PRINT(("pciide_dma_table_setup: table at %p len %ld, "
|
|
"phy 0x%lx\n", dma_maps->dma_table, dma_table_size,
|
|
seg.ds_addr), DEBUG_PROBE);
|
|
|
|
/* Create and load table DMA map for this disk */
|
|
if ((error = bus_dmamap_create(sc->sc_dmat, dma_table_size,
|
|
1, dma_table_size, IDEDMA_TBL_ALIGN, BUS_DMA_NOWAIT,
|
|
&dma_maps->dmamap_table)) != 0) {
|
|
printf("%s:%d: unable to create table DMA map for "
|
|
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
|
|
channel, drive, error);
|
|
return error;
|
|
}
|
|
if ((error = bus_dmamap_load(sc->sc_dmat,
|
|
dma_maps->dmamap_table,
|
|
dma_maps->dma_table,
|
|
dma_table_size, NULL, BUS_DMA_NOWAIT)) != 0) {
|
|
printf("%s:%d: unable to load table DMA map for "
|
|
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
|
|
channel, drive, error);
|
|
return error;
|
|
}
|
|
WDCDEBUG_PRINT(("pciide_dma_table_setup: phy addr of table 0x%lx\n",
|
|
dma_maps->dmamap_table->dm_segs[0].ds_addr), DEBUG_PROBE);
|
|
/* Create a xfer DMA map for this drive */
|
|
if ((error = bus_dmamap_create(sc->sc_dmat, IDEDMA_BYTE_COUNT_MAX,
|
|
NIDEDMA_TABLES, IDEDMA_BYTE_COUNT_MAX, IDEDMA_BYTE_COUNT_ALIGN,
|
|
BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
|
|
&dma_maps->dmamap_xfer)) != 0) {
|
|
printf("%s:%d: unable to create xfer DMA map for "
|
|
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
|
|
channel, drive, error);
|
|
return error;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
pciide_dma_init(v, channel, drive, databuf, datalen, flags)
|
|
void *v;
|
|
int channel, drive;
|
|
void *databuf;
|
|
size_t datalen;
|
|
int flags;
|
|
{
|
|
struct pciide_softc *sc = v;
|
|
int error, seg;
|
|
struct pciide_dma_maps *dma_maps =
|
|
&sc->pciide_channels[channel].dma_maps[drive];
|
|
|
|
error = bus_dmamap_load(sc->sc_dmat,
|
|
dma_maps->dmamap_xfer,
|
|
databuf, datalen, NULL, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("%s:%d: unable to load xfer DMA map for"
|
|
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
|
|
channel, drive, error);
|
|
return error;
|
|
}
|
|
|
|
bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
|
|
dma_maps->dmamap_xfer->dm_mapsize,
|
|
(flags & WDC_DMA_READ) ?
|
|
BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
|
|
|
|
for (seg = 0; seg < dma_maps->dmamap_xfer->dm_nsegs; seg++) {
|
|
#ifdef DIAGNOSTIC
|
|
/* A segment must not cross a 64k boundary */
|
|
{
|
|
u_long phys = dma_maps->dmamap_xfer->dm_segs[seg].ds_addr;
|
|
u_long len = dma_maps->dmamap_xfer->dm_segs[seg].ds_len;
|
|
if ((phys & ~IDEDMA_BYTE_COUNT_MASK) !=
|
|
((phys + len - 1) & ~IDEDMA_BYTE_COUNT_MASK)) {
|
|
printf("pciide_dma: segment %d physical addr 0x%lx"
|
|
" len 0x%lx not properly aligned\n",
|
|
seg, phys, len);
|
|
panic("pciide_dma: buf align");
|
|
}
|
|
}
|
|
#endif
|
|
dma_maps->dma_table[seg].base_addr =
|
|
htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_addr);
|
|
dma_maps->dma_table[seg].byte_count =
|
|
htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_len &
|
|
IDEDMA_BYTE_COUNT_MASK);
|
|
WDCDEBUG_PRINT(("\t seg %d len %d addr 0x%x\n",
|
|
seg, le32toh(dma_maps->dma_table[seg].byte_count),
|
|
le32toh(dma_maps->dma_table[seg].base_addr)), DEBUG_DMA);
|
|
|
|
}
|
|
dma_maps->dma_table[dma_maps->dmamap_xfer->dm_nsegs -1].byte_count |=
|
|
htole32(IDEDMA_BYTE_COUNT_EOT);
|
|
|
|
bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_table, 0,
|
|
dma_maps->dmamap_table->dm_mapsize,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Maps are ready. Start DMA function */
|
|
#ifdef DIAGNOSTIC
|
|
if (dma_maps->dmamap_table->dm_segs[0].ds_addr & ~IDEDMA_TBL_MASK) {
|
|
printf("pciide_dma_init: addr 0x%lx not properly aligned\n",
|
|
dma_maps->dmamap_table->dm_segs[0].ds_addr);
|
|
panic("pciide_dma_init: table align");
|
|
}
|
|
#endif
|
|
|
|
/* Clear status bits */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel,
|
|
bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel));
|
|
/* Write table addr */
|
|
bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_TBL + IDEDMA_SCH_OFFSET * channel,
|
|
dma_maps->dmamap_table->dm_segs[0].ds_addr);
|
|
/* set read/write */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
|
|
(flags & WDC_DMA_READ) ? IDEDMA_CMD_WRITE: 0);
|
|
/* remember flags */
|
|
dma_maps->dma_flags = flags;
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
pciide_dma_start(v, channel, drive)
|
|
void *v;
|
|
int channel, drive;
|
|
{
|
|
struct pciide_softc *sc = v;
|
|
|
|
WDCDEBUG_PRINT(("pciide_dma_start\n"),DEBUG_XFERS);
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
|
|
bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) | IDEDMA_CMD_START);
|
|
}
|
|
|
|
int
|
|
pciide_dma_finish(v, channel, drive, force)
|
|
void *v;
|
|
int channel, drive;
|
|
int force;
|
|
{
|
|
struct pciide_softc *sc = v;
|
|
u_int8_t status;
|
|
int error = 0;
|
|
struct pciide_dma_maps *dma_maps =
|
|
&sc->pciide_channels[channel].dma_maps[drive];
|
|
|
|
status = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel);
|
|
WDCDEBUG_PRINT(("pciide_dma_finish: status 0x%x\n", status),
|
|
DEBUG_XFERS);
|
|
|
|
if (force == 0 && (status & IDEDMA_CTL_INTR) == 0)
|
|
return WDC_DMAST_NOIRQ;
|
|
|
|
/* stop DMA channel */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
|
|
bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) & ~IDEDMA_CMD_START);
|
|
|
|
/* Clear status bits */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel,
|
|
status);
|
|
|
|
/* Unload the map of the data buffer */
|
|
bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
|
|
dma_maps->dmamap_xfer->dm_mapsize,
|
|
(dma_maps->dma_flags & WDC_DMA_READ) ?
|
|
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_xfer);
|
|
|
|
if ((status & IDEDMA_CTL_ERR) != 0) {
|
|
printf("%s:%d:%d: bus-master DMA error: status=0x%x\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, status);
|
|
error |= WDC_DMAST_ERR;
|
|
}
|
|
|
|
if ((status & IDEDMA_CTL_INTR) == 0) {
|
|
printf("%s:%d:%d: bus-master DMA error: missing interrupt, "
|
|
"status=0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, channel,
|
|
drive, status);
|
|
error |= WDC_DMAST_NOIRQ;
|
|
}
|
|
|
|
if ((status & IDEDMA_CTL_ACT) != 0) {
|
|
/* data underrun, may be a valid condition for ATAPI */
|
|
error |= WDC_DMAST_UNDER;
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/* some common code used by several chip_map */
|
|
int
|
|
pciide_chansetup(sc, channel, interface)
|
|
struct pciide_softc *sc;
|
|
int channel;
|
|
pcireg_t interface;
|
|
{
|
|
struct pciide_channel *cp = &sc->pciide_channels[channel];
|
|
sc->wdc_chanarray[channel] = &cp->wdc_channel;
|
|
cp->name = PCIIDE_CHANNEL_NAME(channel);
|
|
cp->wdc_channel.channel = channel;
|
|
cp->wdc_channel.wdc = &sc->sc_wdcdev;
|
|
cp->wdc_channel.ch_queue =
|
|
malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
|
|
if (cp->wdc_channel.ch_queue == NULL) {
|
|
printf("%s %s channel: "
|
|
"can't allocate memory for command queue",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
return 0;
|
|
}
|
|
printf("%s: %s channel %s to %s mode\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
|
|
(interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
|
|
"configured" : "wired",
|
|
(interface & PCIIDE_INTERFACE_PCI(channel)) ?
|
|
"native-PCI" : "compatibility");
|
|
return 1;
|
|
}
|
|
|
|
/* some common code used by several chip channel_map */
|
|
void
|
|
pciide_mapchan(pa, cp, interface, cmdsizep, ctlsizep, pci_intr)
|
|
struct pci_attach_args *pa;
|
|
struct pciide_channel *cp;
|
|
pcireg_t interface;
|
|
bus_size_t *cmdsizep, *ctlsizep;
|
|
int (*pci_intr) __P((void *));
|
|
{
|
|
struct channel_softc *wdc_cp = &cp->wdc_channel;
|
|
|
|
if (interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel))
|
|
cp->hw_ok = pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep,
|
|
pci_intr);
|
|
else
|
|
cp->hw_ok = pciide_mapregs_compat(pa, cp,
|
|
wdc_cp->channel, cmdsizep, ctlsizep);
|
|
|
|
if (cp->hw_ok == 0)
|
|
return;
|
|
wdc_cp->data32iot = wdc_cp->cmd_iot;
|
|
wdc_cp->data32ioh = wdc_cp->cmd_ioh;
|
|
wdcattach(wdc_cp);
|
|
}
|
|
|
|
/*
|
|
* Generic code to call to know if a channel can be disabled. Return 1
|
|
* if channel can be disabled, 0 if not
|
|
*/
|
|
int
|
|
pciiide_chan_candisable(cp)
|
|
struct pciide_channel *cp;
|
|
{
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
struct channel_softc *wdc_cp = &cp->wdc_channel;
|
|
|
|
if ((wdc_cp->ch_drive[0].drive_flags & DRIVE) == 0 &&
|
|
(wdc_cp->ch_drive[1].drive_flags & DRIVE) == 0) {
|
|
printf("%s: disabling %s channel (no drives)\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
cp->hw_ok = 0;
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* generic code to map the compat intr if hw_ok=1 and it is a compat channel.
|
|
* Set hw_ok=0 on failure
|
|
*/
|
|
void
|
|
pciide_map_compat_intr(pa, cp, compatchan, interface)
|
|
struct pci_attach_args *pa;
|
|
struct pciide_channel *cp;
|
|
int compatchan, interface;
|
|
{
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
struct channel_softc *wdc_cp = &cp->wdc_channel;
|
|
|
|
if (cp->hw_ok == 0)
|
|
return;
|
|
if ((interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel)) != 0)
|
|
return;
|
|
|
|
cp->ih = pciide_machdep_compat_intr_establish(&sc->sc_wdcdev.sc_dev,
|
|
pa, compatchan, pciide_compat_intr, cp);
|
|
if (cp->ih == NULL) {
|
|
printf("%s: no compatibility interrupt for use by %s "
|
|
"channel\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
cp->hw_ok = 0;
|
|
}
|
|
}
|
|
|
|
void
|
|
pciide_print_modes(cp)
|
|
struct pciide_channel *cp;
|
|
{
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
int drive;
|
|
struct channel_softc *chp;
|
|
struct ata_drive_datas *drvp;
|
|
|
|
chp = &cp->wdc_channel;
|
|
for (drive = 0; drive < 2; drive++) {
|
|
drvp = &chp->ch_drive[drive];
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
printf("%s(%s:%d:%d): using PIO mode %d",
|
|
drvp->drv_softc->dv_xname,
|
|
sc->sc_wdcdev.sc_dev.dv_xname,
|
|
chp->channel, drive, drvp->PIO_mode);
|
|
if (drvp->drive_flags & DRIVE_DMA)
|
|
printf(", DMA mode %d", drvp->DMA_mode);
|
|
if (drvp->drive_flags & DRIVE_UDMA)
|
|
printf(", Ultra-DMA mode %d", drvp->UDMA_mode);
|
|
if (drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA))
|
|
printf(" (using DMA data transfers)");
|
|
printf("\n");
|
|
}
|
|
}
|
|
|
|
void
|
|
default_chip_map(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
struct pciide_channel *cp;
|
|
pcireg_t interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc,
|
|
sc->sc_tag, PCI_CLASS_REG));
|
|
pcireg_t csr;
|
|
int channel, drive;
|
|
struct ata_drive_datas *drvp;
|
|
u_int8_t idedma_ctl;
|
|
bus_size_t cmdsize, ctlsize;
|
|
char *failreason;
|
|
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
|
|
if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
|
|
printf("%s: bus-master DMA support present",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
if (sc->sc_pp == &default_product_desc &&
|
|
(sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags &
|
|
PCIIDE_OPTIONS_DMA) == 0) {
|
|
printf(", but unused (no driver support)");
|
|
sc->sc_dma_ok = 0;
|
|
} else {
|
|
pciide_mapreg_dma(sc, pa);
|
|
if (sc->sc_dma_ok != 0)
|
|
printf(", used without full driver "
|
|
"support");
|
|
}
|
|
} else {
|
|
printf("%s: hardware does not support DMA",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
sc->sc_dma_ok = 0;
|
|
}
|
|
printf("\n");
|
|
if (sc->sc_dma_ok)
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
|
|
sc->sc_wdcdev.PIO_cap = 0;
|
|
sc->sc_wdcdev.DMA_cap = 0;
|
|
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16;
|
|
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
cp = &sc->pciide_channels[channel];
|
|
if (pciide_chansetup(sc, channel, interface) == 0)
|
|
continue;
|
|
if (interface & PCIIDE_INTERFACE_PCI(channel)) {
|
|
cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
|
|
&ctlsize, pciide_pci_intr);
|
|
} else {
|
|
cp->hw_ok = pciide_mapregs_compat(pa, cp,
|
|
channel, &cmdsize, &ctlsize);
|
|
}
|
|
if (cp->hw_ok == 0)
|
|
continue;
|
|
/*
|
|
* Check to see if something appears to be there.
|
|
*/
|
|
failreason = NULL;
|
|
if (!wdcprobe(&cp->wdc_channel)) {
|
|
failreason = "not responding; disabled or no drives?";
|
|
goto next;
|
|
}
|
|
/*
|
|
* Now, make sure it's actually attributable to this PCI IDE
|
|
* channel by trying to access the channel again while the
|
|
* PCI IDE controller's I/O space is disabled. (If the
|
|
* channel no longer appears to be there, it belongs to
|
|
* this controller.) YUCK!
|
|
*/
|
|
csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
|
|
PCI_COMMAND_STATUS_REG);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG,
|
|
csr & ~PCI_COMMAND_IO_ENABLE);
|
|
if (wdcprobe(&cp->wdc_channel))
|
|
failreason = "other hardware responding at addresses";
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag,
|
|
PCI_COMMAND_STATUS_REG, csr);
|
|
next:
|
|
if (failreason) {
|
|
printf("%s: %s channel ignored (%s)\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
|
|
failreason);
|
|
cp->hw_ok = 0;
|
|
bus_space_unmap(cp->wdc_channel.cmd_iot,
|
|
cp->wdc_channel.cmd_ioh, cmdsize);
|
|
bus_space_unmap(cp->wdc_channel.ctl_iot,
|
|
cp->wdc_channel.ctl_ioh, ctlsize);
|
|
} else {
|
|
pciide_map_compat_intr(pa, cp, channel, interface);
|
|
}
|
|
if (cp->hw_ok) {
|
|
cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
|
|
cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
|
|
wdcattach(&cp->wdc_channel);
|
|
}
|
|
}
|
|
|
|
if (sc->sc_dma_ok == 0)
|
|
return;
|
|
|
|
/* Allocate DMA maps */
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
idedma_ctl = 0;
|
|
cp = &sc->pciide_channels[channel];
|
|
for (drive = 0; drive < 2; drive++) {
|
|
drvp = &cp->wdc_channel.ch_drive[drive];
|
|
/* If no drive, skip */
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
if ((drvp->drive_flags & DRIVE_DMA) == 0)
|
|
continue;
|
|
if (pciide_dma_table_setup(sc, channel, drive) != 0) {
|
|
/* Abort DMA setup */
|
|
printf("%s:%d:%d: can't allocate DMA maps, "
|
|
"using PIO transfers\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname,
|
|
channel, drive);
|
|
drvp->drive_flags &= ~DRIVE_DMA;
|
|
}
|
|
printf("%s:%d:%d: using DMA data transfers\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname,
|
|
channel, drive);
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
}
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
|
|
idedma_ctl);
|
|
}
|
|
}
|
|
}
|
|
|
|
void
|
|
piix_chip_map(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
struct pciide_channel *cp;
|
|
int channel;
|
|
u_int32_t idetim;
|
|
bus_size_t cmdsize, ctlsize;
|
|
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
|
|
printf("%s: bus-master DMA support present",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
pciide_mapreg_dma(sc, pa);
|
|
printf("\n");
|
|
if (sc->sc_dma_ok) {
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
|
|
switch(sc->sc_pp->ide_product) {
|
|
case PCI_PRODUCT_INTEL_82371AB_IDE:
|
|
case PCI_PRODUCT_INTEL_82801AA_IDE:
|
|
case PCI_PRODUCT_INTEL_82801AB_IDE:
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
|
|
}
|
|
}
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
|
|
WDC_CAPABILITY_MODE;
|
|
sc->sc_wdcdev.PIO_cap = 4;
|
|
sc->sc_wdcdev.DMA_cap = 2;
|
|
sc->sc_wdcdev.UDMA_cap =
|
|
(sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE) ? 4 : 2;
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82371FB_IDE)
|
|
sc->sc_wdcdev.set_modes = piix_setup_channel;
|
|
else
|
|
sc->sc_wdcdev.set_modes = piix3_4_setup_channel;
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
|
|
|
|
WDCDEBUG_PRINT(("piix_setup_chip: old idetim=0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
|
|
DEBUG_PROBE);
|
|
if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
|
|
WDCDEBUG_PRINT((", sidetim=0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
|
|
DEBUG_PROBE);
|
|
if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
|
|
WDCDEBUG_PRINT((", udamreg 0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
|
|
DEBUG_PROBE);
|
|
}
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE) {
|
|
WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
|
|
DEBUG_PROBE);
|
|
}
|
|
|
|
}
|
|
WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
|
|
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
cp = &sc->pciide_channels[channel];
|
|
/* PIIX is compat-only */
|
|
if (pciide_chansetup(sc, channel, 0) == 0)
|
|
continue;
|
|
idetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
|
|
if ((PIIX_IDETIM_READ(idetim, channel) &
|
|
PIIX_IDETIM_IDE) == 0) {
|
|
printf("%s: %s channel ignored (disabled)\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
continue;
|
|
}
|
|
/* PIIX are compat-only pciide devices */
|
|
pciide_mapchan(pa, cp, 0, &cmdsize, &ctlsize, pciide_pci_intr);
|
|
if (cp->hw_ok == 0)
|
|
continue;
|
|
if (pciiide_chan_candisable(cp)) {
|
|
idetim = PIIX_IDETIM_CLEAR(idetim, PIIX_IDETIM_IDE,
|
|
channel);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM,
|
|
idetim);
|
|
}
|
|
pciide_map_compat_intr(pa, cp, channel, 0);
|
|
if (cp->hw_ok == 0)
|
|
continue;
|
|
sc->sc_wdcdev.set_modes(&cp->wdc_channel);
|
|
}
|
|
|
|
WDCDEBUG_PRINT(("piix_setup_chip: idetim=0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
|
|
DEBUG_PROBE);
|
|
if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
|
|
WDCDEBUG_PRINT((", sidetim=0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
|
|
DEBUG_PROBE);
|
|
if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
|
|
WDCDEBUG_PRINT((", udamreg 0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
|
|
DEBUG_PROBE);
|
|
}
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE) {
|
|
WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
|
|
DEBUG_PROBE);
|
|
}
|
|
}
|
|
WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
|
|
}
|
|
|
|
void
|
|
piix_setup_channel(chp)
|
|
struct channel_softc *chp;
|
|
{
|
|
u_int8_t mode[2], drive;
|
|
u_int32_t oidetim, idetim, idedma_ctl;
|
|
struct pciide_channel *cp = (struct pciide_channel*)chp;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
struct ata_drive_datas *drvp = cp->wdc_channel.ch_drive;
|
|
|
|
oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
|
|
idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, chp->channel);
|
|
idedma_ctl = 0;
|
|
|
|
/* set up new idetim: Enable IDE registers decode */
|
|
idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE,
|
|
chp->channel);
|
|
|
|
/* setup DMA */
|
|
pciide_channel_dma_setup(cp);
|
|
|
|
/*
|
|
* Here we have to mess up with drives mode: PIIX can't have
|
|
* different timings for master and slave drives.
|
|
* We need to find the best combination.
|
|
*/
|
|
|
|
/* If both drives supports DMA, take the lower mode */
|
|
if ((drvp[0].drive_flags & DRIVE_DMA) &&
|
|
(drvp[1].drive_flags & DRIVE_DMA)) {
|
|
mode[0] = mode[1] =
|
|
min(drvp[0].DMA_mode, drvp[1].DMA_mode);
|
|
drvp[0].DMA_mode = mode[0];
|
|
drvp[1].DMA_mode = mode[1];
|
|
goto ok;
|
|
}
|
|
/*
|
|
* If only one drive supports DMA, use its mode, and
|
|
* put the other one in PIO mode 0 if mode not compatible
|
|
*/
|
|
if (drvp[0].drive_flags & DRIVE_DMA) {
|
|
mode[0] = drvp[0].DMA_mode;
|
|
mode[1] = drvp[1].PIO_mode;
|
|
if (piix_isp_pio[mode[1]] != piix_isp_dma[mode[0]] ||
|
|
piix_rtc_pio[mode[1]] != piix_rtc_dma[mode[0]])
|
|
mode[1] = drvp[1].PIO_mode = 0;
|
|
goto ok;
|
|
}
|
|
if (drvp[1].drive_flags & DRIVE_DMA) {
|
|
mode[1] = drvp[1].DMA_mode;
|
|
mode[0] = drvp[0].PIO_mode;
|
|
if (piix_isp_pio[mode[0]] != piix_isp_dma[mode[1]] ||
|
|
piix_rtc_pio[mode[0]] != piix_rtc_dma[mode[1]])
|
|
mode[0] = drvp[0].PIO_mode = 0;
|
|
goto ok;
|
|
}
|
|
/*
|
|
* If both drives are not DMA, takes the lower mode, unless
|
|
* one of them is PIO mode < 2
|
|
*/
|
|
if (drvp[0].PIO_mode < 2) {
|
|
mode[0] = drvp[0].PIO_mode = 0;
|
|
mode[1] = drvp[1].PIO_mode;
|
|
} else if (drvp[1].PIO_mode < 2) {
|
|
mode[1] = drvp[1].PIO_mode = 0;
|
|
mode[0] = drvp[0].PIO_mode;
|
|
} else {
|
|
mode[0] = mode[1] =
|
|
min(drvp[1].PIO_mode, drvp[0].PIO_mode);
|
|
drvp[0].PIO_mode = mode[0];
|
|
drvp[1].PIO_mode = mode[1];
|
|
}
|
|
ok: /* The modes are setup */
|
|
for (drive = 0; drive < 2; drive++) {
|
|
if (drvp[drive].drive_flags & DRIVE_DMA) {
|
|
idetim |= piix_setup_idetim_timings(
|
|
mode[drive], 1, chp->channel);
|
|
goto end;
|
|
}
|
|
}
|
|
/* If we are there, none of the drives are DMA */
|
|
if (mode[0] >= 2)
|
|
idetim |= piix_setup_idetim_timings(
|
|
mode[0], 0, chp->channel);
|
|
else
|
|
idetim |= piix_setup_idetim_timings(
|
|
mode[1], 0, chp->channel);
|
|
end: /*
|
|
* timing mode is now set up in the controller. Enable
|
|
* it per-drive
|
|
*/
|
|
for (drive = 0; drive < 2; drive++) {
|
|
/* If no drive, skip */
|
|
if ((drvp[drive].drive_flags & DRIVE) == 0)
|
|
continue;
|
|
idetim |= piix_setup_idetim_drvs(&drvp[drive]);
|
|
if (drvp[drive].drive_flags & DRIVE_DMA)
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
}
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
|
|
idedma_ctl);
|
|
}
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
|
|
pciide_print_modes(cp);
|
|
}
|
|
|
|
void
|
|
piix3_4_setup_channel(chp)
|
|
struct channel_softc *chp;
|
|
{
|
|
struct ata_drive_datas *drvp;
|
|
u_int32_t oidetim, idetim, sidetim, udmareg, ideconf, idedma_ctl;
|
|
struct pciide_channel *cp = (struct pciide_channel*)chp;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
int drive;
|
|
int channel = chp->channel;
|
|
|
|
oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
|
|
sidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM);
|
|
udmareg = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG);
|
|
ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG);
|
|
idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, channel);
|
|
sidetim &= ~(PIIX_SIDETIM_ISP_MASK(channel) |
|
|
PIIX_SIDETIM_RTC_MASK(channel));
|
|
|
|
idedma_ctl = 0;
|
|
/* If channel disabled, no need to go further */
|
|
if ((PIIX_IDETIM_READ(oidetim, channel) & PIIX_IDETIM_IDE) == 0)
|
|
return;
|
|
/* set up new idetim: Enable IDE registers decode */
|
|
idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE, channel);
|
|
|
|
/* setup DMA if needed */
|
|
pciide_channel_dma_setup(cp);
|
|
|
|
for (drive = 0; drive < 2; drive++) {
|
|
udmareg &= ~(PIIX_UDMACTL_DRV_EN(channel, drive) |
|
|
PIIX_UDMATIM_SET(0x3, channel, drive));
|
|
drvp = &chp->ch_drive[drive];
|
|
/* If no drive, skip */
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
|
|
(drvp->drive_flags & DRIVE_UDMA) == 0))
|
|
goto pio;
|
|
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
|
|
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE) {
|
|
ideconf |= PIIX_CONFIG_PINGPONG;
|
|
}
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE) {
|
|
/* setup Ultra/66 */
|
|
if (drvp->UDMA_mode > 2 &&
|
|
(ideconf & PIIX_CONFIG_CR(channel, drive)) == 0)
|
|
drvp->UDMA_mode = 2;
|
|
if (drvp->UDMA_mode > 2)
|
|
ideconf |= PIIX_CONFIG_UDMA66(channel, drive);
|
|
else
|
|
ideconf &= ~PIIX_CONFIG_UDMA66(channel, drive);
|
|
}
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
|
|
(drvp->drive_flags & DRIVE_UDMA)) {
|
|
/* use Ultra/DMA */
|
|
drvp->drive_flags &= ~DRIVE_DMA;
|
|
udmareg |= PIIX_UDMACTL_DRV_EN( channel, drive);
|
|
udmareg |= PIIX_UDMATIM_SET(
|
|
piix4_sct_udma[drvp->UDMA_mode], channel, drive);
|
|
} else {
|
|
/* use Multiword DMA */
|
|
drvp->drive_flags &= ~DRIVE_UDMA;
|
|
if (drive == 0) {
|
|
idetim |= piix_setup_idetim_timings(
|
|
drvp->DMA_mode, 1, channel);
|
|
} else {
|
|
sidetim |= piix_setup_sidetim_timings(
|
|
drvp->DMA_mode, 1, channel);
|
|
idetim =PIIX_IDETIM_SET(idetim,
|
|
PIIX_IDETIM_SITRE, channel);
|
|
}
|
|
}
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
|
|
pio: /* use PIO mode */
|
|
idetim |= piix_setup_idetim_drvs(drvp);
|
|
if (drive == 0) {
|
|
idetim |= piix_setup_idetim_timings(
|
|
drvp->PIO_mode, 0, channel);
|
|
} else {
|
|
sidetim |= piix_setup_sidetim_timings(
|
|
drvp->PIO_mode, 0, channel);
|
|
idetim =PIIX_IDETIM_SET(idetim,
|
|
PIIX_IDETIM_SITRE, channel);
|
|
}
|
|
}
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
|
|
idedma_ctl);
|
|
}
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM, sidetim);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG, udmareg);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_CONFIG, ideconf);
|
|
pciide_print_modes(cp);
|
|
}
|
|
|
|
|
|
/* setup ISP and RTC fields, based on mode */
|
|
static u_int32_t
|
|
piix_setup_idetim_timings(mode, dma, channel)
|
|
u_int8_t mode;
|
|
u_int8_t dma;
|
|
u_int8_t channel;
|
|
{
|
|
|
|
if (dma)
|
|
return PIIX_IDETIM_SET(0,
|
|
PIIX_IDETIM_ISP_SET(piix_isp_dma[mode]) |
|
|
PIIX_IDETIM_RTC_SET(piix_rtc_dma[mode]),
|
|
channel);
|
|
else
|
|
return PIIX_IDETIM_SET(0,
|
|
PIIX_IDETIM_ISP_SET(piix_isp_pio[mode]) |
|
|
PIIX_IDETIM_RTC_SET(piix_rtc_pio[mode]),
|
|
channel);
|
|
}
|
|
|
|
/* setup DTE, PPE, IE and TIME field based on PIO mode */
|
|
static u_int32_t
|
|
piix_setup_idetim_drvs(drvp)
|
|
struct ata_drive_datas *drvp;
|
|
{
|
|
u_int32_t ret = 0;
|
|
struct channel_softc *chp = drvp->chnl_softc;
|
|
u_int8_t channel = chp->channel;
|
|
u_int8_t drive = drvp->drive;
|
|
|
|
/*
|
|
* If drive is using UDMA, timings setups are independant
|
|
* So just check DMA and PIO here.
|
|
*/
|
|
if (drvp->drive_flags & DRIVE_DMA) {
|
|
/* if mode = DMA mode 0, use compatible timings */
|
|
if ((drvp->drive_flags & DRIVE_DMA) &&
|
|
drvp->DMA_mode == 0) {
|
|
drvp->PIO_mode = 0;
|
|
return ret;
|
|
}
|
|
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
|
|
/*
|
|
* PIO and DMA timings are the same, use fast timings for PIO
|
|
* too, else use compat timings.
|
|
*/
|
|
if ((piix_isp_pio[drvp->PIO_mode] !=
|
|
piix_isp_dma[drvp->DMA_mode]) ||
|
|
(piix_rtc_pio[drvp->PIO_mode] !=
|
|
piix_rtc_dma[drvp->DMA_mode]))
|
|
drvp->PIO_mode = 0;
|
|
/* if PIO mode <= 2, use compat timings for PIO */
|
|
if (drvp->PIO_mode <= 2) {
|
|
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_DTE(drive),
|
|
channel);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Now setup PIO modes. If mode < 2, use compat timings.
|
|
* Else enable fast timings. Enable IORDY and prefetch/post
|
|
* if PIO mode >= 3.
|
|
*/
|
|
|
|
if (drvp->PIO_mode < 2)
|
|
return ret;
|
|
|
|
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
|
|
if (drvp->PIO_mode >= 3) {
|
|
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_IE(drive), channel);
|
|
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_PPE(drive), channel);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* setup values in SIDETIM registers, based on mode */
|
|
static u_int32_t
|
|
piix_setup_sidetim_timings(mode, dma, channel)
|
|
u_int8_t mode;
|
|
u_int8_t dma;
|
|
u_int8_t channel;
|
|
{
|
|
if (dma)
|
|
return PIIX_SIDETIM_ISP_SET(piix_isp_dma[mode], channel) |
|
|
PIIX_SIDETIM_RTC_SET(piix_rtc_dma[mode], channel);
|
|
else
|
|
return PIIX_SIDETIM_ISP_SET(piix_isp_pio[mode], channel) |
|
|
PIIX_SIDETIM_RTC_SET(piix_rtc_pio[mode], channel);
|
|
}
|
|
|
|
void
|
|
amd756_chip_map(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
struct pciide_channel *cp;
|
|
pcireg_t interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc,
|
|
sc->sc_tag, PCI_CLASS_REG));
|
|
int channel;
|
|
pcireg_t chanenable;
|
|
bus_size_t cmdsize, ctlsize;
|
|
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
printf("%s: bus-master DMA support present",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
pciide_mapreg_dma(sc, pa);
|
|
printf("\n");
|
|
if (sc->sc_dma_ok)
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
|
|
WDC_CAPABILITY_MODE;
|
|
sc->sc_wdcdev.PIO_cap = 4;
|
|
sc->sc_wdcdev.DMA_cap = 2;
|
|
sc->sc_wdcdev.UDMA_cap = 4;
|
|
sc->sc_wdcdev.set_modes = amd756_setup_channel;
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
|
|
chanenable = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD756_CHANSTATUS_EN);
|
|
|
|
WDCDEBUG_PRINT(("amd756_chip_map: Channel enable=0x%x\n", chanenable),
|
|
DEBUG_PROBE);
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
cp = &sc->pciide_channels[channel];
|
|
if (pciide_chansetup(sc, channel, interface) == 0)
|
|
continue;
|
|
|
|
if ((chanenable & AMD756_CHAN_EN(channel)) == 0) {
|
|
printf("%s: %s channel ignored (disabled)\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
continue;
|
|
}
|
|
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
|
|
pciide_pci_intr);
|
|
|
|
if (pciiide_chan_candisable(cp))
|
|
chanenable &= ~AMD756_CHAN_EN(channel);
|
|
pciide_map_compat_intr(pa, cp, channel, interface);
|
|
if (cp->hw_ok == 0)
|
|
continue;
|
|
|
|
amd756_setup_channel(&cp->wdc_channel);
|
|
}
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, AMD756_CHANSTATUS_EN,
|
|
chanenable);
|
|
return;
|
|
}
|
|
|
|
void
|
|
amd756_setup_channel(chp)
|
|
struct channel_softc *chp;
|
|
{
|
|
u_int32_t udmatim_reg, datatim_reg;
|
|
u_int8_t idedma_ctl;
|
|
int mode, drive;
|
|
struct ata_drive_datas *drvp;
|
|
struct pciide_channel *cp = (struct pciide_channel*)chp;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
|
|
idedma_ctl = 0;
|
|
datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD756_DATATIM);
|
|
udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD756_UDMA);
|
|
datatim_reg &= ~AMD756_DATATIM_MASK(chp->channel);
|
|
udmatim_reg &= ~AMD756_UDMA_MASK(chp->channel);
|
|
|
|
/* setup DMA if needed */
|
|
pciide_channel_dma_setup(cp);
|
|
|
|
for (drive = 0; drive < 2; drive++) {
|
|
drvp = &chp->ch_drive[drive];
|
|
/* If no drive, skip */
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
/* add timing values, setup DMA if needed */
|
|
if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
|
|
(drvp->drive_flags & DRIVE_UDMA) == 0)) {
|
|
mode = drvp->PIO_mode;
|
|
goto pio;
|
|
}
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
|
|
(drvp->drive_flags & DRIVE_UDMA)) {
|
|
/* use Ultra/DMA */
|
|
drvp->drive_flags &= ~DRIVE_DMA;
|
|
udmatim_reg |= AMD756_UDMA_EN(chp->channel, drive) |
|
|
AMD756_UDMA_EN_MTH(chp->channel, drive) |
|
|
AMD756_UDMA_TIME(chp->channel, drive,
|
|
amd756_udma_tim[drvp->UDMA_mode]);
|
|
/* can use PIO timings, MW DMA unused */
|
|
mode = drvp->PIO_mode;
|
|
} else {
|
|
/* use Multiword DMA */
|
|
drvp->drive_flags &= ~DRIVE_UDMA;
|
|
/* mode = min(pio, dma+2) */
|
|
if (drvp->PIO_mode <= (drvp->DMA_mode +2))
|
|
mode = drvp->PIO_mode;
|
|
else
|
|
mode = drvp->DMA_mode + 2;
|
|
}
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
|
|
pio: /* setup PIO mode */
|
|
if (mode <= 2) {
|
|
drvp->DMA_mode = 0;
|
|
drvp->PIO_mode = 0;
|
|
mode = 0;
|
|
} else {
|
|
drvp->PIO_mode = mode;
|
|
drvp->DMA_mode = mode - 2;
|
|
}
|
|
datatim_reg |=
|
|
AMD756_DATATIM_PULSE(chp->channel, drive,
|
|
amd756_pio_set[mode]) |
|
|
AMD756_DATATIM_RECOV(chp->channel, drive,
|
|
amd756_pio_rec[mode]);
|
|
}
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
|
|
idedma_ctl);
|
|
}
|
|
pciide_print_modes(cp);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, AMD756_DATATIM, datatim_reg);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, AMD756_UDMA, udmatim_reg);
|
|
}
|
|
|
|
void
|
|
apollo_chip_map(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
struct pciide_channel *cp;
|
|
pcireg_t interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc,
|
|
sc->sc_tag, PCI_CLASS_REG));
|
|
int channel;
|
|
u_int32_t ideconf;
|
|
bus_size_t cmdsize, ctlsize;
|
|
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
printf("%s: bus-master DMA support present",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
pciide_mapreg_dma(sc, pa);
|
|
printf("\n");
|
|
if (sc->sc_dma_ok) {
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
|
|
if (sc->sc_pp->ide_product == PCI_PRODUCT_VIATECH_VT82C586A_IDE)
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
|
|
}
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE;
|
|
sc->sc_wdcdev.PIO_cap = 4;
|
|
sc->sc_wdcdev.DMA_cap = 2;
|
|
sc->sc_wdcdev.UDMA_cap = 2;
|
|
sc->sc_wdcdev.set_modes = apollo_setup_channel;
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16;
|
|
|
|
WDCDEBUG_PRINT(("apollo_chip_map: old APO_IDECONF=0x%x, "
|
|
"APO_CTLMISC=0x%x, APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF),
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_CTLMISC),
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)),
|
|
DEBUG_PROBE);
|
|
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
cp = &sc->pciide_channels[channel];
|
|
if (pciide_chansetup(sc, channel, interface) == 0)
|
|
continue;
|
|
|
|
ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF);
|
|
if ((ideconf & APO_IDECONF_EN(channel)) == 0) {
|
|
printf("%s: %s channel ignored (disabled)\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
continue;
|
|
}
|
|
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
|
|
pciide_pci_intr);
|
|
if (cp->hw_ok == 0)
|
|
continue;
|
|
if (pciiide_chan_candisable(cp)) {
|
|
ideconf &= ~APO_IDECONF_EN(channel);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, APO_IDECONF,
|
|
ideconf);
|
|
}
|
|
pciide_map_compat_intr(pa, cp, channel, interface);
|
|
|
|
if (cp->hw_ok == 0)
|
|
continue;
|
|
apollo_setup_channel(&sc->pciide_channels[channel].wdc_channel);
|
|
}
|
|
WDCDEBUG_PRINT(("apollo_chip_map: APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)), DEBUG_PROBE);
|
|
}
|
|
|
|
void
|
|
apollo_setup_channel(chp)
|
|
struct channel_softc *chp;
|
|
{
|
|
u_int32_t udmatim_reg, datatim_reg;
|
|
u_int8_t idedma_ctl;
|
|
int mode, drive;
|
|
struct ata_drive_datas *drvp;
|
|
struct pciide_channel *cp = (struct pciide_channel*)chp;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
|
|
idedma_ctl = 0;
|
|
datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM);
|
|
udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA);
|
|
datatim_reg &= ~APO_DATATIM_MASK(chp->channel);
|
|
udmatim_reg &= ~AP0_UDMA_MASK(chp->channel);
|
|
|
|
/* setup DMA if needed */
|
|
pciide_channel_dma_setup(cp);
|
|
|
|
for (drive = 0; drive < 2; drive++) {
|
|
drvp = &chp->ch_drive[drive];
|
|
/* If no drive, skip */
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
/* add timing values, setup DMA if needed */
|
|
if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
|
|
(drvp->drive_flags & DRIVE_UDMA) == 0)) {
|
|
mode = drvp->PIO_mode;
|
|
goto pio;
|
|
}
|
|
if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
|
|
(drvp->drive_flags & DRIVE_UDMA)) {
|
|
/* use Ultra/DMA */
|
|
drvp->drive_flags &= ~DRIVE_DMA;
|
|
udmatim_reg |= APO_UDMA_EN(chp->channel, drive) |
|
|
APO_UDMA_EN_MTH(chp->channel, drive) |
|
|
APO_UDMA_TIME(chp->channel, drive,
|
|
apollo_udma_tim[drvp->UDMA_mode]);
|
|
/* can use PIO timings, MW DMA unused */
|
|
mode = drvp->PIO_mode;
|
|
} else {
|
|
/* use Multiword DMA */
|
|
drvp->drive_flags &= ~DRIVE_UDMA;
|
|
/* mode = min(pio, dma+2) */
|
|
if (drvp->PIO_mode <= (drvp->DMA_mode +2))
|
|
mode = drvp->PIO_mode;
|
|
else
|
|
mode = drvp->DMA_mode + 2;
|
|
}
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
|
|
pio: /* setup PIO mode */
|
|
if (mode <= 2) {
|
|
drvp->DMA_mode = 0;
|
|
drvp->PIO_mode = 0;
|
|
mode = 0;
|
|
} else {
|
|
drvp->PIO_mode = mode;
|
|
drvp->DMA_mode = mode - 2;
|
|
}
|
|
datatim_reg |=
|
|
APO_DATATIM_PULSE(chp->channel, drive,
|
|
apollo_pio_set[mode]) |
|
|
APO_DATATIM_RECOV(chp->channel, drive,
|
|
apollo_pio_rec[mode]);
|
|
}
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
|
|
idedma_ctl);
|
|
}
|
|
pciide_print_modes(cp);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, APO_DATATIM, datatim_reg);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, APO_UDMA, udmatim_reg);
|
|
}
|
|
|
|
void
|
|
cmd_channel_map(pa, sc, channel)
|
|
struct pci_attach_args *pa;
|
|
struct pciide_softc *sc;
|
|
int channel;
|
|
{
|
|
struct pciide_channel *cp = &sc->pciide_channels[channel];
|
|
bus_size_t cmdsize, ctlsize;
|
|
u_int8_t ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CTRL);
|
|
int interface =
|
|
PCI_INTERFACE(pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG));
|
|
|
|
sc->wdc_chanarray[channel] = &cp->wdc_channel;
|
|
cp->name = PCIIDE_CHANNEL_NAME(channel);
|
|
cp->wdc_channel.channel = channel;
|
|
cp->wdc_channel.wdc = &sc->sc_wdcdev;
|
|
|
|
if (channel > 0) {
|
|
cp->wdc_channel.ch_queue =
|
|
sc->pciide_channels[0].wdc_channel.ch_queue;
|
|
} else {
|
|
cp->wdc_channel.ch_queue =
|
|
malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
|
|
}
|
|
if (cp->wdc_channel.ch_queue == NULL) {
|
|
printf("%s %s channel: "
|
|
"can't allocate memory for command queue",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
return;
|
|
}
|
|
|
|
printf("%s: %s channel %s to %s mode\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
|
|
(interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
|
|
"configured" : "wired",
|
|
(interface & PCIIDE_INTERFACE_PCI(channel)) ?
|
|
"native-PCI" : "compatibility");
|
|
|
|
/*
|
|
* with a CMD PCI64x, if we get here, the first channel is enabled:
|
|
* there's no way to disable the first channel without disabling
|
|
* the whole device
|
|
*/
|
|
if (channel != 0 && (ctrl & CMD_CTRL_2PORT) == 0) {
|
|
printf("%s: %s channel ignored (disabled)\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
return;
|
|
}
|
|
|
|
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, cmd_pci_intr);
|
|
if (cp->hw_ok == 0)
|
|
return;
|
|
if (channel == 1) {
|
|
if (pciiide_chan_candisable(cp)) {
|
|
ctrl &= ~CMD_CTRL_2PORT;
|
|
pciide_pci_write(pa->pa_pc, pa->pa_tag,
|
|
CMD_CTRL, ctrl);
|
|
}
|
|
}
|
|
pciide_map_compat_intr(pa, cp, channel, interface);
|
|
}
|
|
|
|
int
|
|
cmd_pci_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct pciide_softc *sc = arg;
|
|
struct pciide_channel *cp;
|
|
struct channel_softc *wdc_cp;
|
|
int i, rv, crv;
|
|
u_int32_t priirq, secirq;
|
|
|
|
rv = 0;
|
|
priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
|
|
secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
|
|
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
|
|
cp = &sc->pciide_channels[i];
|
|
wdc_cp = &cp->wdc_channel;
|
|
/* If a compat channel skip. */
|
|
if (cp->compat)
|
|
continue;
|
|
if ((i == 0 && (priirq & CMD_CONF_DRV0_INTR)) ||
|
|
(i == 1 && (secirq & CMD_ARTTIM23_IRQ))) {
|
|
crv = wdcintr(wdc_cp);
|
|
if (crv == 0)
|
|
printf("%s:%d: bogus intr\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, i);
|
|
else
|
|
rv = 1;
|
|
}
|
|
}
|
|
return rv;
|
|
}
|
|
|
|
void
|
|
cmd_chip_map(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
int channel;
|
|
|
|
/*
|
|
* For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
|
|
* and base adresses registers can be disabled at
|
|
* hardware level. In this case, the device is wired
|
|
* in compat mode and its first channel is always enabled,
|
|
* but we can't rely on PCI_COMMAND_IO_ENABLE.
|
|
* In fact, it seems that the first channel of the CMD PCI0640
|
|
* can't be disabled.
|
|
*/
|
|
|
|
#ifdef PCIIDE_CMD064x_DISABLE
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
#endif
|
|
|
|
printf("%s: hardware does not support DMA\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
sc->sc_dma_ok = 0;
|
|
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16;
|
|
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
cmd_channel_map(pa, sc, channel);
|
|
}
|
|
}
|
|
|
|
void
|
|
cmd0643_6_chip_map(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
struct pciide_channel *cp;
|
|
int channel;
|
|
|
|
/*
|
|
* For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
|
|
* and base adresses registers can be disabled at
|
|
* hardware level. In this case, the device is wired
|
|
* in compat mode and its first channel is always enabled,
|
|
* but we can't rely on PCI_COMMAND_IO_ENABLE.
|
|
* In fact, it seems that the first channel of the CMD PCI0640
|
|
* can't be disabled.
|
|
*/
|
|
|
|
#ifdef PCIIDE_CMD064x_DISABLE
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
#endif
|
|
printf("%s: bus-master DMA support present",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
pciide_mapreg_dma(sc, pa);
|
|
printf("\n");
|
|
if (sc->sc_dma_ok)
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
|
|
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
|
|
WDC_CAPABILITY_MODE;
|
|
sc->sc_wdcdev.PIO_cap = 4;
|
|
sc->sc_wdcdev.DMA_cap = 2;
|
|
sc->sc_wdcdev.set_modes = cmd0643_6_setup_channel;
|
|
|
|
WDCDEBUG_PRINT(("cmd0643_6_chip_map: old timings reg 0x%x 0x%x\n",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
|
|
DEBUG_PROBE);
|
|
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
cp = &sc->pciide_channels[channel];
|
|
cmd_channel_map(pa, sc, channel);
|
|
if (cp->hw_ok == 0)
|
|
continue;
|
|
cmd0643_6_setup_channel(&cp->wdc_channel);
|
|
}
|
|
pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_DMA_MODE, CMD_DMA_MULTIPLE);
|
|
WDCDEBUG_PRINT(("cmd0643_6_chip_map: timings reg now 0x%x 0x%x\n",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
|
|
DEBUG_PROBE);
|
|
}
|
|
|
|
void
|
|
cmd0643_6_setup_channel(chp)
|
|
struct channel_softc *chp;
|
|
{
|
|
struct ata_drive_datas *drvp;
|
|
u_int8_t tim;
|
|
u_int32_t idedma_ctl;
|
|
int drive;
|
|
struct pciide_channel *cp = (struct pciide_channel*)chp;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
|
|
idedma_ctl = 0;
|
|
/* setup DMA if needed */
|
|
pciide_channel_dma_setup(cp);
|
|
|
|
for (drive = 0; drive < 2; drive++) {
|
|
drvp = &chp->ch_drive[drive];
|
|
/* If no drive, skip */
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
/* add timing values, setup DMA if needed */
|
|
tim = cmd0643_6_data_tim_pio[drvp->PIO_mode];
|
|
if (drvp->drive_flags & DRIVE_DMA) {
|
|
/*
|
|
* use Multiword DMA.
|
|
* Timings will be used for both PIO and DMA, so adjust
|
|
* DMA mode if needed
|
|
*/
|
|
if (drvp->PIO_mode >= 3 &&
|
|
(drvp->DMA_mode + 2) > drvp->PIO_mode) {
|
|
drvp->DMA_mode = drvp->PIO_mode - 2;
|
|
}
|
|
tim = cmd0643_6_data_tim_dma[drvp->DMA_mode];
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
}
|
|
pciide_pci_write(sc->sc_pc, sc->sc_tag,
|
|
CMD_DATA_TIM(chp->channel, drive), tim);
|
|
}
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
|
|
idedma_ctl);
|
|
}
|
|
pciide_print_modes(cp);
|
|
}
|
|
|
|
void
|
|
cy693_chip_map(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
struct pciide_channel *cp;
|
|
pcireg_t interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc,
|
|
sc->sc_tag, PCI_CLASS_REG));
|
|
int compatchan;
|
|
bus_size_t cmdsize, ctlsize;
|
|
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
/*
|
|
* this chip has 2 PCI IDE functions, one for primary and one for
|
|
* secondary. So we need to call pciide_mapregs_compat() with
|
|
* the real channel
|
|
*/
|
|
if (pa->pa_function == 1) {
|
|
compatchan = 0;
|
|
} else if (pa->pa_function == 2) {
|
|
compatchan = 1;
|
|
} else {
|
|
printf("%s: unexpected PCI function %d\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function);
|
|
return;
|
|
}
|
|
if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
|
|
printf("%s: bus-master DMA support present",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
pciide_mapreg_dma(sc, pa);
|
|
} else {
|
|
printf("%s: hardware does not support DMA",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
sc->sc_dma_ok = 0;
|
|
}
|
|
printf("\n");
|
|
|
|
if (sc->sc_dma_ok)
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
|
|
WDC_CAPABILITY_MODE;
|
|
sc->sc_wdcdev.PIO_cap = 4;
|
|
sc->sc_wdcdev.DMA_cap = 2;
|
|
sc->sc_wdcdev.set_modes = cy693_setup_channel;
|
|
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = 1;
|
|
|
|
/* Only one channel for this chip; if we are here it's enabled */
|
|
cp = &sc->pciide_channels[0];
|
|
sc->wdc_chanarray[0] = &cp->wdc_channel;
|
|
cp->name = PCIIDE_CHANNEL_NAME(0);
|
|
cp->wdc_channel.channel = 0;
|
|
cp->wdc_channel.wdc = &sc->sc_wdcdev;
|
|
cp->wdc_channel.ch_queue =
|
|
malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
|
|
if (cp->wdc_channel.ch_queue == NULL) {
|
|
printf("%s primary channel: "
|
|
"can't allocate memory for command queue",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
printf("%s: primary channel %s to ",
|
|
sc->sc_wdcdev.sc_dev.dv_xname,
|
|
(interface & PCIIDE_INTERFACE_SETTABLE(0)) ?
|
|
"configured" : "wired");
|
|
if (interface & PCIIDE_INTERFACE_PCI(0)) {
|
|
printf("native-PCI");
|
|
cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize, &ctlsize,
|
|
pciide_pci_intr);
|
|
} else {
|
|
printf("compatibility");
|
|
cp->hw_ok = pciide_mapregs_compat(pa, cp, compatchan,
|
|
&cmdsize, &ctlsize);
|
|
}
|
|
printf(" mode\n");
|
|
cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
|
|
cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
|
|
wdcattach(&cp->wdc_channel);
|
|
if (pciiide_chan_candisable(cp)) {
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag,
|
|
PCI_COMMAND_STATUS_REG, 0);
|
|
}
|
|
pciide_map_compat_intr(pa, cp, compatchan, interface);
|
|
if (cp->hw_ok == 0)
|
|
return;
|
|
WDCDEBUG_PRINT(("cy693_chip_map: old timings reg 0x%x\n",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)),DEBUG_PROBE);
|
|
cy693_setup_channel(&cp->wdc_channel);
|
|
WDCDEBUG_PRINT(("cy693_chip_map: new timings reg 0x%x\n",
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)), DEBUG_PROBE);
|
|
}
|
|
|
|
void
|
|
cy693_setup_channel(chp)
|
|
struct channel_softc *chp;
|
|
{
|
|
struct ata_drive_datas *drvp;
|
|
int drive;
|
|
u_int32_t cy_cmd_ctrl;
|
|
u_int32_t idedma_ctl;
|
|
struct pciide_channel *cp = (struct pciide_channel*)chp;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
int dma_mode = -1;
|
|
|
|
cy_cmd_ctrl = idedma_ctl = 0;
|
|
|
|
/* setup DMA if needed */
|
|
pciide_channel_dma_setup(cp);
|
|
|
|
for (drive = 0; drive < 2; drive++) {
|
|
drvp = &chp->ch_drive[drive];
|
|
/* If no drive, skip */
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
/* add timing values, setup DMA if needed */
|
|
if (drvp->drive_flags & DRIVE_DMA) {
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
/* use Multiword DMA */
|
|
if (dma_mode == -1 || dma_mode > drvp->DMA_mode)
|
|
dma_mode = drvp->DMA_mode;
|
|
}
|
|
cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
|
|
CY_CMD_CTRL_IOW_PULSE_OFF(drive));
|
|
cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
|
|
CY_CMD_CTRL_IOW_REC_OFF(drive));
|
|
cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
|
|
CY_CMD_CTRL_IOR_PULSE_OFF(drive));
|
|
cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
|
|
CY_CMD_CTRL_IOR_REC_OFF(drive));
|
|
}
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL, cy_cmd_ctrl);
|
|
chp->ch_drive[0].DMA_mode = dma_mode;
|
|
chp->ch_drive[1].DMA_mode = dma_mode;
|
|
pciide_print_modes(cp);
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL, idedma_ctl);
|
|
}
|
|
}
|
|
|
|
void
|
|
sis_chip_map(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
struct pciide_channel *cp;
|
|
int channel;
|
|
u_int8_t sis_ctr0 = pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_CTRL0);
|
|
pcireg_t interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc,
|
|
sc->sc_tag, PCI_CLASS_REG));
|
|
pcireg_t rev = PCI_REVISION(pci_conf_read(sc->sc_pc,
|
|
sc->sc_tag, PCI_CLASS_REG));
|
|
bus_size_t cmdsize, ctlsize;
|
|
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
printf("%s: bus-master DMA support present",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
pciide_mapreg_dma(sc, pa);
|
|
printf("\n");
|
|
if (sc->sc_dma_ok) {
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
|
|
if (rev >= 0xd0)
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
|
|
}
|
|
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
|
|
WDC_CAPABILITY_MODE;
|
|
sc->sc_wdcdev.PIO_cap = 4;
|
|
sc->sc_wdcdev.DMA_cap = 2;
|
|
if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA)
|
|
sc->sc_wdcdev.UDMA_cap = 2;
|
|
sc->sc_wdcdev.set_modes = sis_setup_channel;
|
|
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
|
|
|
|
pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_MISC,
|
|
pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_MISC) |
|
|
SIS_MISC_TIM_SEL | SIS_MISC_FIFO_SIZE);
|
|
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
cp = &sc->pciide_channels[channel];
|
|
if (pciide_chansetup(sc, channel, interface) == 0)
|
|
continue;
|
|
if ((channel == 0 && (sis_ctr0 & SIS_CTRL0_CHAN0_EN) == 0) ||
|
|
(channel == 1 && (sis_ctr0 & SIS_CTRL0_CHAN1_EN) == 0)) {
|
|
printf("%s: %s channel ignored (disabled)\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
continue;
|
|
}
|
|
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
|
|
pciide_pci_intr);
|
|
if (cp->hw_ok == 0)
|
|
continue;
|
|
if (pciiide_chan_candisable(cp)) {
|
|
if (channel == 0)
|
|
sis_ctr0 &= ~SIS_CTRL0_CHAN0_EN;
|
|
else
|
|
sis_ctr0 &= ~SIS_CTRL0_CHAN1_EN;
|
|
pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_CTRL0,
|
|
sis_ctr0);
|
|
}
|
|
pciide_map_compat_intr(pa, cp, channel, interface);
|
|
if (cp->hw_ok == 0)
|
|
continue;
|
|
sis_setup_channel(&cp->wdc_channel);
|
|
}
|
|
}
|
|
|
|
void
|
|
sis_setup_channel(chp)
|
|
struct channel_softc *chp;
|
|
{
|
|
struct ata_drive_datas *drvp;
|
|
int drive;
|
|
u_int32_t sis_tim;
|
|
u_int32_t idedma_ctl;
|
|
struct pciide_channel *cp = (struct pciide_channel*)chp;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
|
|
WDCDEBUG_PRINT(("sis_setup_channel: old timings reg for "
|
|
"channel %d 0x%x\n", chp->channel,
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel))),
|
|
DEBUG_PROBE);
|
|
sis_tim = 0;
|
|
idedma_ctl = 0;
|
|
/* setup DMA if needed */
|
|
pciide_channel_dma_setup(cp);
|
|
|
|
for (drive = 0; drive < 2; drive++) {
|
|
drvp = &chp->ch_drive[drive];
|
|
/* If no drive, skip */
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
/* add timing values, setup DMA if needed */
|
|
if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
|
|
(drvp->drive_flags & DRIVE_UDMA) == 0)
|
|
goto pio;
|
|
|
|
if (drvp->drive_flags & DRIVE_UDMA) {
|
|
/* use Ultra/DMA */
|
|
drvp->drive_flags &= ~DRIVE_DMA;
|
|
sis_tim |= sis_udma_tim[drvp->UDMA_mode] <<
|
|
SIS_TIM_UDMA_TIME_OFF(drive);
|
|
sis_tim |= SIS_TIM_UDMA_EN(drive);
|
|
} else {
|
|
/*
|
|
* use Multiword DMA
|
|
* Timings will be used for both PIO and DMA,
|
|
* so adjust DMA mode if needed
|
|
*/
|
|
if (drvp->PIO_mode > (drvp->DMA_mode + 2))
|
|
drvp->PIO_mode = drvp->DMA_mode + 2;
|
|
if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
|
|
drvp->DMA_mode = (drvp->PIO_mode > 2) ?
|
|
drvp->PIO_mode - 2 : 0;
|
|
if (drvp->DMA_mode == 0)
|
|
drvp->PIO_mode = 0;
|
|
}
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
pio: sis_tim |= sis_pio_act[drvp->PIO_mode] <<
|
|
SIS_TIM_ACT_OFF(drive);
|
|
sis_tim |= sis_pio_rec[drvp->PIO_mode] <<
|
|
SIS_TIM_REC_OFF(drive);
|
|
}
|
|
WDCDEBUG_PRINT(("sis_setup_channel: new timings reg for "
|
|
"channel %d 0x%x\n", chp->channel, sis_tim), DEBUG_PROBE);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel), sis_tim);
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL, idedma_ctl);
|
|
}
|
|
pciide_print_modes(cp);
|
|
}
|
|
|
|
void
|
|
acer_chip_map(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
struct pciide_channel *cp;
|
|
int channel;
|
|
pcireg_t cr, interface;
|
|
bus_size_t cmdsize, ctlsize;
|
|
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
printf("%s: bus-master DMA support present",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
pciide_mapreg_dma(sc, pa);
|
|
printf("\n");
|
|
if (sc->sc_dma_ok)
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
|
|
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
|
|
WDC_CAPABILITY_MODE;
|
|
|
|
sc->sc_wdcdev.PIO_cap = 4;
|
|
sc->sc_wdcdev.DMA_cap = 2;
|
|
sc->sc_wdcdev.UDMA_cap = 2;
|
|
sc->sc_wdcdev.set_modes = acer_setup_channel;
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
|
|
|
|
pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CDRC,
|
|
(pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CDRC) |
|
|
ACER_CDRC_DMA_EN) & ~ACER_CDRC_FIFO_DISABLE);
|
|
|
|
/* Enable "microsoft register bits" R/W. */
|
|
pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR3,
|
|
pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR3) | ACER_CCAR3_PI);
|
|
pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR1,
|
|
pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR1) &
|
|
~(ACER_CHANSTATUS_RO|PCIIDE_CHAN_RO(0)|PCIIDE_CHAN_RO(1)));
|
|
pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR2,
|
|
pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR2) &
|
|
~ACER_CHANSTATUSREGS_RO);
|
|
cr = pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG);
|
|
cr |= (PCIIDE_CHANSTATUS_EN << PCI_INTERFACE_SHIFT);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG, cr);
|
|
/* Don't use cr, re-read the real register content instead */
|
|
interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc, sc->sc_tag,
|
|
PCI_CLASS_REG));
|
|
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
cp = &sc->pciide_channels[channel];
|
|
if (pciide_chansetup(sc, channel, interface) == 0)
|
|
continue;
|
|
if ((interface & PCIIDE_CHAN_EN(channel)) == 0) {
|
|
printf("%s: %s channel ignored (disabled)\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
continue;
|
|
}
|
|
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
|
|
acer_pci_intr);
|
|
if (cp->hw_ok == 0)
|
|
continue;
|
|
if (pciiide_chan_candisable(cp)) {
|
|
cr &= ~(PCIIDE_CHAN_EN(channel) << PCI_INTERFACE_SHIFT);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag,
|
|
PCI_CLASS_REG, cr);
|
|
}
|
|
pciide_map_compat_intr(pa, cp, channel, interface);
|
|
acer_setup_channel(&cp->wdc_channel);
|
|
}
|
|
}
|
|
|
|
void
|
|
acer_setup_channel(chp)
|
|
struct channel_softc *chp;
|
|
{
|
|
struct ata_drive_datas *drvp;
|
|
int drive;
|
|
u_int32_t acer_fifo_udma;
|
|
u_int32_t idedma_ctl;
|
|
struct pciide_channel *cp = (struct pciide_channel*)chp;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
|
|
idedma_ctl = 0;
|
|
acer_fifo_udma = pci_conf_read(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA);
|
|
WDCDEBUG_PRINT(("acer_setup_channel: old fifo/udma reg 0x%x\n",
|
|
acer_fifo_udma), DEBUG_PROBE);
|
|
/* setup DMA if needed */
|
|
pciide_channel_dma_setup(cp);
|
|
|
|
for (drive = 0; drive < 2; drive++) {
|
|
drvp = &chp->ch_drive[drive];
|
|
/* If no drive, skip */
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
WDCDEBUG_PRINT(("acer_setup_channel: old timings reg for "
|
|
"channel %d drive %d 0x%x\n", chp->channel, drive,
|
|
pciide_pci_read(sc->sc_pc, sc->sc_tag,
|
|
ACER_IDETIM(chp->channel, drive))), DEBUG_PROBE);
|
|
/* clear FIFO/DMA mode */
|
|
acer_fifo_udma &= ~(ACER_FTH_OPL(chp->channel, drive, 0x3) |
|
|
ACER_UDMA_EN(chp->channel, drive) |
|
|
ACER_UDMA_TIM(chp->channel, drive, 0x7));
|
|
|
|
/* add timing values, setup DMA if needed */
|
|
if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
|
|
(drvp->drive_flags & DRIVE_UDMA) == 0) {
|
|
acer_fifo_udma |=
|
|
ACER_FTH_OPL(chp->channel, drive, 0x1);
|
|
goto pio;
|
|
}
|
|
|
|
acer_fifo_udma |= ACER_FTH_OPL(chp->channel, drive, 0x2);
|
|
if (drvp->drive_flags & DRIVE_UDMA) {
|
|
/* use Ultra/DMA */
|
|
drvp->drive_flags &= ~DRIVE_DMA;
|
|
acer_fifo_udma |= ACER_UDMA_EN(chp->channel, drive);
|
|
acer_fifo_udma |=
|
|
ACER_UDMA_TIM(chp->channel, drive,
|
|
acer_udma[drvp->UDMA_mode]);
|
|
} else {
|
|
/*
|
|
* use Multiword DMA
|
|
* Timings will be used for both PIO and DMA,
|
|
* so adjust DMA mode if needed
|
|
*/
|
|
if (drvp->PIO_mode > (drvp->DMA_mode + 2))
|
|
drvp->PIO_mode = drvp->DMA_mode + 2;
|
|
if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
|
|
drvp->DMA_mode = (drvp->PIO_mode > 2) ?
|
|
drvp->PIO_mode - 2 : 0;
|
|
if (drvp->DMA_mode == 0)
|
|
drvp->PIO_mode = 0;
|
|
}
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
pio: pciide_pci_write(sc->sc_pc, sc->sc_tag,
|
|
ACER_IDETIM(chp->channel, drive),
|
|
acer_pio[drvp->PIO_mode]);
|
|
}
|
|
WDCDEBUG_PRINT(("acer_setup_channel: new fifo/udma reg 0x%x\n",
|
|
acer_fifo_udma), DEBUG_PROBE);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA, acer_fifo_udma);
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL, idedma_ctl);
|
|
}
|
|
pciide_print_modes(cp);
|
|
}
|
|
|
|
int
|
|
acer_pci_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct pciide_softc *sc = arg;
|
|
struct pciide_channel *cp;
|
|
struct channel_softc *wdc_cp;
|
|
int i, rv, crv;
|
|
u_int32_t chids;
|
|
|
|
rv = 0;
|
|
chids = pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CHIDS);
|
|
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
|
|
cp = &sc->pciide_channels[i];
|
|
wdc_cp = &cp->wdc_channel;
|
|
/* If a compat channel skip. */
|
|
if (cp->compat)
|
|
continue;
|
|
if (chids & ACER_CHIDS_INT(i)) {
|
|
crv = wdcintr(wdc_cp);
|
|
if (crv == 0)
|
|
printf("%s:%d: bogus intr\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, i);
|
|
else
|
|
rv = 1;
|
|
}
|
|
}
|
|
return rv;
|
|
}
|
|
|
|
/* A macro to test product */
|
|
#define PDC_IS_262(sc) (sc->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA66)
|
|
|
|
void
|
|
pdc202xx_chip_map(sc, pa)
|
|
struct pciide_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
{
|
|
struct pciide_channel *cp;
|
|
int channel;
|
|
pcireg_t interface, st, mode;
|
|
bus_size_t cmdsize, ctlsize;
|
|
|
|
st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE);
|
|
WDCDEBUG_PRINT(("pdc202xx_setup_chip: controller state 0x%x\n", st),
|
|
DEBUG_PROBE);
|
|
if (pciide_chipen(sc, pa) == 0)
|
|
return;
|
|
|
|
/* turn off RAID mode */
|
|
st &= ~PDC2xx_STATE_IDERAID;
|
|
|
|
/*
|
|
* can't rely on the PCI_CLASS_REG content if the chip was in raid
|
|
* mode. We have to fake interface
|
|
*/
|
|
interface = PCIIDE_INTERFACE_SETTABLE(0) | PCIIDE_INTERFACE_SETTABLE(1);
|
|
if (st & PDC2xx_STATE_NATIVE)
|
|
interface |= PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);
|
|
|
|
printf("%s: bus-master DMA support present",
|
|
sc->sc_wdcdev.sc_dev.dv_xname);
|
|
pciide_mapreg_dma(sc, pa);
|
|
printf("\n");
|
|
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
|
|
WDC_CAPABILITY_MODE;
|
|
if (sc->sc_dma_ok)
|
|
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
|
|
sc->sc_wdcdev.PIO_cap = 4;
|
|
sc->sc_wdcdev.DMA_cap = 2;
|
|
if (PDC_IS_262(sc))
|
|
sc->sc_wdcdev.UDMA_cap = 4;
|
|
else
|
|
sc->sc_wdcdev.UDMA_cap = 2;
|
|
sc->sc_wdcdev.set_modes = pdc202xx_setup_channel;
|
|
sc->sc_wdcdev.channels = sc->wdc_chanarray;
|
|
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
|
|
|
|
/* setup failsafe defaults */
|
|
mode = 0;
|
|
mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[0]);
|
|
mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[0]);
|
|
mode = PDC2xx_TIM_SET_MB(mode, pdc2xx_dma_mb[0]);
|
|
mode = PDC2xx_TIM_SET_MC(mode, pdc2xx_dma_mc[0]);
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d drive 0 "
|
|
"initial timings 0x%x, now 0x%x\n", channel,
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag,
|
|
PDC2xx_TIM(channel, 0)), mode | PDC2xx_TIM_IORDYp),
|
|
DEBUG_PROBE);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_TIM(channel, 0),
|
|
mode | PDC2xx_TIM_IORDYp);
|
|
WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d drive 1 "
|
|
"initial timings 0x%x, now 0x%x\n", channel,
|
|
pci_conf_read(sc->sc_pc, sc->sc_tag,
|
|
PDC2xx_TIM(channel, 1)), mode), DEBUG_PROBE);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_TIM(channel, 1),
|
|
mode);
|
|
}
|
|
|
|
mode = PDC2xx_SCR_DMA;
|
|
if (PDC_IS_262(sc)) {
|
|
mode = PDC2xx_SCR_SET_GEN(mode, PDC262_SCR_GEN_LAT);
|
|
} else {
|
|
/* the BIOS set it up this way */
|
|
mode = PDC2xx_SCR_SET_GEN(mode, 0x1);
|
|
}
|
|
mode = PDC2xx_SCR_SET_I2C(mode, 0x3); /* ditto */
|
|
mode = PDC2xx_SCR_SET_POLL(mode, 0x1); /* ditto */
|
|
WDCDEBUG_PRINT(("pdc202xx_setup_chip: initial SCR 0x%x, now 0x%x\n",
|
|
bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR), mode),
|
|
DEBUG_PROBE);
|
|
bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR, mode);
|
|
|
|
/* controller initial state register is OK even without BIOS */
|
|
/* Set DMA mode to IDE DMA compatibility */
|
|
mode = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM);
|
|
WDCDEBUG_PRINT(("pdc202xx_setup_chip: primary mode 0x%x", mode ),
|
|
DEBUG_PROBE);
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM,
|
|
mode | 0x1);
|
|
mode = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM);
|
|
WDCDEBUG_PRINT((", secondary mode 0x%x\n", mode ), DEBUG_PROBE);
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM,
|
|
mode | 0x1);
|
|
|
|
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
|
|
cp = &sc->pciide_channels[channel];
|
|
if (pciide_chansetup(sc, channel, interface) == 0)
|
|
continue;
|
|
if ((st & (PDC_IS_262(sc) ?
|
|
PDC262_STATE_EN(channel):PDC246_STATE_EN(channel))) == 0) {
|
|
printf("%s: %s channel ignored (disabled)\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
|
|
continue;
|
|
}
|
|
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
|
|
pdc202xx_pci_intr);
|
|
if (cp->hw_ok == 0)
|
|
continue;
|
|
if (pciiide_chan_candisable(cp))
|
|
st &= ~(PDC_IS_262(sc) ?
|
|
PDC262_STATE_EN(channel):PDC246_STATE_EN(channel));
|
|
pciide_map_compat_intr(pa, cp, channel, interface);
|
|
pdc202xx_setup_channel(&cp->wdc_channel);
|
|
}
|
|
WDCDEBUG_PRINT(("pdc202xx_setup_chip: new controller state 0x%x\n", st),
|
|
DEBUG_PROBE);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_STATE, st);
|
|
return;
|
|
}
|
|
|
|
void
|
|
pdc202xx_setup_channel(chp)
|
|
struct channel_softc *chp;
|
|
{
|
|
struct ata_drive_datas *drvp;
|
|
int drive;
|
|
pcireg_t mode, st;
|
|
u_int32_t idedma_ctl, scr, atapi;
|
|
struct pciide_channel *cp = (struct pciide_channel*)chp;
|
|
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
|
|
int channel = chp->channel;
|
|
|
|
/* setup DMA if needed */
|
|
pciide_channel_dma_setup(cp);
|
|
|
|
idedma_ctl = 0;
|
|
|
|
/* Per channel settings */
|
|
if (PDC_IS_262(sc)) {
|
|
scr = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
PDC262_U66);
|
|
st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE);
|
|
/* Trimm UDMA mode */
|
|
if ((st & PDC262_STATE_80P(channel)) == 0 ||
|
|
(chp->ch_drive[0].drive_flags & DRIVE_UDMA &&
|
|
chp->ch_drive[0].UDMA_mode <= 2) ||
|
|
(chp->ch_drive[1].drive_flags & DRIVE_UDMA &&
|
|
chp->ch_drive[1].UDMA_mode <= 2)) {
|
|
if (chp->ch_drive[0].UDMA_mode > 2)
|
|
chp->ch_drive[0].UDMA_mode = 2;
|
|
if (chp->ch_drive[1].UDMA_mode > 2)
|
|
chp->ch_drive[1].UDMA_mode = 2;
|
|
}
|
|
/* Set U66 if needed */
|
|
if ((chp->ch_drive[0].drive_flags & DRIVE_UDMA &&
|
|
chp->ch_drive[0].UDMA_mode > 2) ||
|
|
(chp->ch_drive[1].drive_flags & DRIVE_UDMA &&
|
|
chp->ch_drive[1].UDMA_mode > 2))
|
|
scr |= PDC262_U66_EN(channel);
|
|
else
|
|
scr &= ~PDC262_U66_EN(channel);
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
PDC262_U66, scr);
|
|
if (chp->ch_drive[0].drive_flags & DRIVE_ATAPI ||
|
|
chp->ch_drive[1].drive_flags & DRIVE_ATAPI) {
|
|
if (((chp->ch_drive[0].drive_flags & DRIVE_UDMA) &&
|
|
!(chp->ch_drive[1].drive_flags & DRIVE_UDMA) &&
|
|
(chp->ch_drive[1].drive_flags & DRIVE_DMA)) ||
|
|
((chp->ch_drive[1].drive_flags & DRIVE_UDMA) &&
|
|
!(chp->ch_drive[0].drive_flags & DRIVE_UDMA) &&
|
|
(chp->ch_drive[0].drive_flags & DRIVE_DMA)))
|
|
atapi = 0;
|
|
else
|
|
atapi = PDC262_ATAPI_UDMA;
|
|
bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
PDC262_ATAPI(channel), atapi);
|
|
}
|
|
}
|
|
for (drive = 0; drive < 2; drive++) {
|
|
drvp = &chp->ch_drive[drive];
|
|
/* If no drive, skip */
|
|
if ((drvp->drive_flags & DRIVE) == 0)
|
|
continue;
|
|
mode = 0;
|
|
if (drvp->drive_flags & DRIVE_UDMA) {
|
|
mode = PDC2xx_TIM_SET_MB(mode,
|
|
pdc2xx_udma_mb[drvp->UDMA_mode]);
|
|
mode = PDC2xx_TIM_SET_MC(mode,
|
|
pdc2xx_udma_mc[drvp->UDMA_mode]);
|
|
drvp->drive_flags &= ~DRIVE_DMA;
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
} else if (drvp->drive_flags & DRIVE_DMA) {
|
|
mode = PDC2xx_TIM_SET_MB(mode,
|
|
pdc2xx_dma_mb[drvp->DMA_mode]);
|
|
mode = PDC2xx_TIM_SET_MC(mode,
|
|
pdc2xx_dma_mc[drvp->DMA_mode]);
|
|
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
|
|
} else {
|
|
mode = PDC2xx_TIM_SET_MB(mode,
|
|
pdc2xx_dma_mb[0]);
|
|
mode = PDC2xx_TIM_SET_MC(mode,
|
|
pdc2xx_dma_mc[0]);
|
|
}
|
|
mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[drvp->PIO_mode]);
|
|
mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[drvp->PIO_mode]);
|
|
if (drvp->drive_flags & DRIVE_ATA)
|
|
mode |= PDC2xx_TIM_PRE;
|
|
mode |= PDC2xx_TIM_SYNC | PDC2xx_TIM_ERRDY;
|
|
if (drvp->PIO_mode >= 3) {
|
|
mode |= PDC2xx_TIM_IORDY;
|
|
if (drive == 0)
|
|
mode |= PDC2xx_TIM_IORDYp;
|
|
}
|
|
WDCDEBUG_PRINT(("pdc202xx_setup_channel: %s:%d:%d "
|
|
"timings 0x%x\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname,
|
|
chp->channel, drive, mode), DEBUG_PROBE);
|
|
pci_conf_write(sc->sc_pc, sc->sc_tag,
|
|
PDC2xx_TIM(chp->channel, drive), mode);
|
|
}
|
|
if (idedma_ctl != 0) {
|
|
/* Add software bits in status register */
|
|
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
|
|
IDEDMA_CTL, idedma_ctl);
|
|
}
|
|
pciide_print_modes(cp);
|
|
}
|
|
|
|
int
|
|
pdc202xx_pci_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct pciide_softc *sc = arg;
|
|
struct pciide_channel *cp;
|
|
struct channel_softc *wdc_cp;
|
|
int i, rv, crv;
|
|
u_int32_t scr;
|
|
|
|
rv = 0;
|
|
scr = bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR);
|
|
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
|
|
cp = &sc->pciide_channels[i];
|
|
wdc_cp = &cp->wdc_channel;
|
|
/* If a compat channel skip. */
|
|
if (cp->compat)
|
|
continue;
|
|
if (scr & PDC2xx_SCR_INT(i)) {
|
|
crv = wdcintr(wdc_cp);
|
|
if (crv == 0)
|
|
printf("%s:%d: bogus intr\n",
|
|
sc->sc_wdcdev.sc_dev.dv_xname, i);
|
|
else
|
|
rv = 1;
|
|
}
|
|
}
|
|
return rv;
|
|
}
|