NetBSD/sys/dev/scsipi/atapiconf.h

145 lines
5.2 KiB
C

/* $NetBSD: atapiconf.h,v 1.4 1998/01/15 02:21:30 cgd Exp $ */
/*
* Copyright (c) 1996 Manuel Bouyer. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Manuel Bouyer.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef SCSI_ATAPICONF_H
#define SCSI_ATAPICONF_H
#include <dev/scsipi/scsipiconf.h>
struct atapi_identify {
struct config_s {
u_int8_t cmd_drq_rem;
#define ATAPI_PACKET_SIZE_MASK 0x03
#define ATAPI_PACKET_SIZE_12 0x00
#define ATAPI_PACKET_SIZE_16 0x01
#define ATAPI_DRQ_MASK 0x60
#define ATAPI_MICROPROCESSOR_DRQ 0x00
#define ATAPI_INTERRUPT_DRQ 0x20
#define ATAPI_ACCELERATED_DRQ 0x40
#define ATAPI_REMOVABLE 0x80
u_int8_t device_type;
#define ATAPI_DEVICE_TYPE_MASK 0x1f
#define ATAPI_DEVICE_TYPE_DAD 0x00 /* direct access device */
/* 0x1-0x4 reserved */
#define ATAPI_DEVICE_TYPE_CD 0x05 /* CD-ROM */
/* 0x6 reserved */
#define ATAPI_DEVICE_TYPE_OMD 0x07 /* optical memory device */
/* 0x8-0x1e reserved */
#define ATAPI_DEVICE_TYPE_UNKNOWN 0x1f
#define ATAPI_GC_PROTOCOL_MASK 0xc0 /* mask of protocol bits */
/* 0x00 and 0x01 are ATA */
#define ATAPI_GC_PROTO_TYPE_ATAPI 0x80
#define ATAPI_GC_PROTO_TYPE_RESERVED 0xc0
} config; /* general configuration */
u_int8_t cylinders[2];
u_int8_t reserved1[2];
u_int8_t heads[2];
u_int8_t unf_bytes_per_track[2];
u_int8_t unf_bytes_per_sector[2];
u_int8_t sectors_per_track[2];
u_int8_t reserved2[6];
char serial_number[20];
u_int8_t buffer_type[2];
u_int8_t buffer_size[2];
u_int8_t ECC_bytes_available[2];
char firmware_revision[8];
char model[40];
u_int8_t sector_count[2];
u_int8_t double_word[2]; /* == 0 for CD-ROMs */
struct capabilities_s {
u_int8_t vendor;
u_int8_t capflags;
#define ATAPI_CAP_DMA 0x01 /* DMA supported */
#define ATAPI_CAP_LBA 0x02 /* LBA supported */
#define ATAPI_IORDY_DISABLE 0x04 /* IORDY can be disabled */
#define ATAPI_IORDY 0x08 /* IORDY supported */
} capabilities;
u_int8_t reserved3[2];
u_int8_t PIO_cycle_timing[2];
u_int8_t DMA_cycle_timing[2];
u_int8_t validity[2]; /* of words 54-58, 64-70 in this table */
#define ATAPI_VALID_FIRST 0x0 /* == 1 => words 54-58 are valid */
#define ATAPI_VALID_SECOND 0x1 /* == 1 => words 64-70 are valid */
u_int8_t current_chs[6]; /* cylinder/head/sector */
u_int8_t current_capacity[4];
u_int8_t reserved4[2];
u_int8_t user_addressable_sectors[4];
u_int8_t singleword_DMA_mode[2];
#define ATAPI_SW_DMA_MODE_AVAIL 0x00ff /* Mode 0 is supported */
#define ATAPI_SW_DMA_MODE_ACTIVE 0xff00 /* which mode is active */
u_int8_t multiword_DMA_mode[2];
#define ATAPI_MW_DMA_MODE_AVAIL 0x00ff /* Mode 0 is supported */
#define ATAPI_MW_DMA_MODE_ACTIVE 0xff00 /* which mode is active */
u_int8_t enhanced_PIO_mode[2];
#define ATAPI_ENHANCED_PIO_AVAIL 0x0001 /* PIO Mode 3 is supported */
u_int8_t blind_PIO_minimum_cycles[2];
u_int8_t mw_dma_tct[2]; /* multi-word DMA transfer cycle time */
u_int8_t min_PIO_tct_no_flow_control[2];
u_int8_t min_PIO_tct_with_flow_control[2];
u_int8_t reserved5[4];
u_int8_t reserved6[114];
u_int8_t vendor[64]; /* vendor unique */
u_int8_t reserved7[192];
};
struct atapibus_attach_args {
struct scsipi_link *sa_sc_link;
struct atapi_identify *sa_inqbuf;
};
int wdc_atapi_get_params __P((struct scsipi_link *, u_int8_t,
struct atapi_identify *));
void atapi_print_addr __P((struct scsipi_link *));
int atapi_interpret_sense __P((struct scsipi_xfer *));
int atapi_scsipi_cmd __P((struct scsipi_link *, struct scsipi_generic *,
int, u_char *, int, int, int, struct buf *, int));
int atapi_mode_select __P((struct scsipi_link *,
struct atapi_mode_header *, int, int, int, int));
int atapi_mode_sense __P((struct scsipi_link *, int,
struct atapi_mode_header *, int, int, int, int));
#endif /* SCSI_ATAPICONF_H */