NetBSD/sys/dev/ic/i8259reg.h

103 lines
4.4 KiB
C

/* $NetBSD: i8259reg.h,v 1.2 2001/06/21 18:57:04 thorpej Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_IC_I8259REG_H_
#define _DEV_IC_I8259REG_H_
/*
* Register definitions for the Intel i8259 Programmable Interrupt
* Controller.
*
* XXX More bits should be filled in, here, as this was taken from
* XXX the Intel PIIX4 manual. Someone with a real 8259 data sheet
* XXX should fill them in.
*/
/*
* Note a write to ICW1 starts an initialization cycle, and must be
* followied by writes to ICW2, ICW3, and ICW4.
*/
#define PIC_ICW1 0x00 /* Initialization Command Word 1 (w) */
#define ICW1_IC4 (1U << 0) /* ICW4 Write Required */
#define ICW1_SNGL (1U << 1) /* 1 == single, 0 == cascade */
#define ICW1_ADI (1U << 2) /* CALL address interval */
#define ICW1_LTIM (1U << 3) /* 1 == intrs are level trigger */
#define ICW1_SELECT (1U << 4) /* select ICW1 */
#define ICW1_IVA(x) ((x) << 5) /* interrupt vector address (MCS-80) */
#define PIC_ICW2 0x01 /* Initialization Command Word 2 (w) */
#define ICW2_VECTOR(x) ((x) & 0xf8) /* vector base address */
#define ICW2_IRL(x) ((x) << 0) /* interrupt request level */
#define PIC_ICW3 0x01 /* Initialization Command Word 3 (w) */
#define ICW3_CASCADE(x) (1U << (x)) /* cascaded mode enable */
#define ICW3_SIC(x) ((x) << 0) /* slave identifcation code */
#define PIC_ICW4 0x01 /* Initialization Command Word 4 (w) */
#define ICW4_8086 (1U << 0) /* 8086 mode */
#define ICW4_AEOI (1U << 1) /* automatic end-of-interrupt */
#define ICW4_BUFM (1U << 2) /* buffered mode master */
#define ICW4_BUF (1U << 3) /* buffered mode */
#define ICW4_SFNM (1U << 4) /* special fully nested mode */
/*
* After an initialization sequence, you get to access the OCWs.
*/
#define PIC_OCW1 0x01 /* Operational Control Word 1 (r/w) */
#define OCW1_IRM(x) (1U << (x)) /* interrupt request mask */
#define PIC_OCW2 0x00 /* Operational Control Word 2 (w) */
#define OCW2_SELECT (0) /* select OCW2 */
#define OCW3_EOI (1U << 5) /* EOI */
#define OCW3_SL (1U << 6) /* specific */
#define OCW3_R (1U << 7) /* rotate */
#define OCW2_ILS(x) ((x) << 0) /* interrupt level select */
#define PIC_OCW3 0x00 /* Operational Control Word 3 (r/w) */
#define OCW3_SSMM (1U << 6) /* set special mask mode */
#define OCW3_SMM (1U << 5) /* 1 = enable smm, 0 = disable */
#define OCW3_SELECT (1U << 3) /* select OCW3 */
#define OCW3_POLL (1U << 2) /* poll mode command */
#define OCW3_RR (1U << 1) /* register read */
#define OCW3_RIS (1U << 0) /* 1 = read IS, 0 = read IR */
#define OCW3_POLL_IRQ(x) ((x) & 0x7f)
#define OCW3_POLL_PENDING (1U << 7)
#endif /* _DEV_IC_I8259REG_H_ */