NetBSD/sys/dev/qbus/if_qt.c

688 lines
19 KiB
C

/* $NetBSD: if_qt.c,v 1.4 2003/08/31 11:13:43 ragge Exp $ */
/*
* Copyright (c) 1992 Steven M. Schultz
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* @(#)if_qt.c 1.2 (2.11BSD) 2/20/93
*/
/*
*
* Modification History
* 23-Feb-92 -- sms
* Rewrite the buffer handling so that fewer than the maximum number of
* buffers may be used (32 receive and 12 transmit buffers consume 66+kb
* of main system memory in addition to the internal structures in the
* networking code). A freelist of available buffers is maintained now.
* When I/O operations complete the associated buffer is placed on the
* freelist (a single linked list for simplicity) and when an I/O is
* started a buffer is pulled off the list.
*
* 20-Feb-92 -- sms
* It works! Darned board couldn't handle "short" rings - those rings
* where only half the entries were made available to the board (the
* ring descriptors were the full size, merely half the entries were
* flagged as belonging always to the driver). Grrrr. Would have thought
* the board could skip over those entries reserved by the driver.
* Now to find a way not to have to allocated 32+12 times 1.5kb worth of
* buffers...
*
* 03-Feb-92 -- sms
* Released but still not working. The driver now responds to arp and
* ping requests. The board is apparently not returning ring descriptors
* to the driver so eventually we run out of buffers. Back to the
* drawing board.
*
* 28-Dec-92 -- sms
* Still not released. Hiatus in finding free time and thin-netting
* the systems (many thanks Terry!).
* Added logic to dynamically allocate a vector and initialize it.
*
* 23-Oct-92 -- sms
* The INIT block must (apparently) be quadword aligned [no thanks to
* the manual for not mentioning that fact]. The necessary alignment
* is achieved by allocating the INIT block from main memory ('malloc'
* guarantees click alignment) and mapping it as needed (which is _very_
* infrequently). A check for quadword alignment of the ring descriptors
* was added - at present the descriptors are properly aligned, if this
* should change then something will have to be done (like do it "right").
* Darned alignment restrictions!
*
* A couple of typos were corrected (missing parentheses, reversed
* arguments to printf calls, etc).
*
* 13-Oct-92 -- sms@wlv.iipo.gtegsc.com
* Created based on the DELQA-PLUS addendum to DELQA User's Guide.
* This driver ('qt') is selected at system configuration time. If the
* board * is not a DELQA-YM an error message will be printed and the
* interface will not be attached.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_qt.c,v 1.4 2003/08/31 11:13:43 ragge Exp $");
#include "opt_inet.h"
#include "bpfilter.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/syslog.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <net/if.h>
#include <net/if_ether.h>
#include <net/netisr.h>
#include <net/route.h>
#ifdef INET
#include <sys/domain.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#endif
#if NBPFILTER > 0
#include <net/bpf.h>
#include <net/bpfdesc.h>
#endif
#ifdef NS
#include <netns/ns.h>
#include <netns/ns_if.h>
#endif
#include <machine/bus.h>
#include <dev/qbus/ubavar.h>
#include <dev/qbus/if_uba.h>
#include <dev/qbus/if_qtreg.h>
#define NRCV QT_MAX_RCV /* Receive descriptors (must be == 32) */
#define NXMT QT_MAX_XMT /* Transmit descriptors (must be == 12) */
#if NRCV != 32 || NXMT != 12
hardware requires these sizes.
#endif
/*
* Control data structures, must be in DMA-friendly memory.
*/
struct qt_cdata {
struct qt_init qc_init; /* Init block */
struct qt_rring qc_r[NRCV]; /* Receive descriptor ring */
struct qt_tring qc_t[NXMT]; /* Transmit descriptor ring */
};
struct qt_softc {
struct device sc_dev; /* Configuration common part */
struct ethercom is_ec; /* common part - must be first */
struct evcnt sc_intrcnt; /* Interrupt counting */
#define is_if is_ec.ec_if /* network-visible interface */
u_int8_t is_addr[ETHER_ADDR_LEN]; /* hardware Ethernet address */
bus_space_tag_t sc_iot;
bus_addr_t sc_ioh;
struct ubinfo sc_ui; /* control block address desc */
struct qt_cdata *sc_ib; /* virt address of ctrl block */
struct qt_cdata *sc_pib; /* phys address of ctrl block */
struct ifubinfo sc_ifuba; /* UNIBUS resources */
struct ifrw sc_ifr[NRCV]; /* UNIBUS receive buffer maps */
struct ifxmt sc_ifw[NXMT]; /* UNIBUS receive buffer maps */
int rindex; /* Receive Completed Index */
int nxtrcv; /* Next Receive Index */
int nrcv; /* Number of Receives active */
int xnext; /* Next descriptor to transmit */
int xlast; /* Last descriptor transmitted */
int nxmit; /* # packets in send queue */
short vector; /* Interrupt vector assigned */
};
static int qtmatch(struct device *, struct cfdata *, void *);
static void qtattach(struct device *, struct device *, void *);
static void qtintr(void *);
static int qtinit(struct ifnet *);
static int qtioctl(struct ifnet *, u_long, caddr_t);
static int qtturbo(struct qt_softc *);
static void qtstart(struct ifnet *ifp);
static void qtstop(struct ifnet *ifp, int disable);
static void qtsrr(struct qt_softc *, int);
static void qtrint(struct qt_softc *sc);
static void qttint(struct qt_softc *sc);
/* static void qtrestart(struct qt_softc *sc); */
CFATTACH_DECL(qt, sizeof(struct qt_softc),
qtmatch, qtattach, NULL, NULL);
/*
* Maximum packet size needs to include 4 bytes for the CRC
* on received packets.
*/
#define MAXPACKETSIZE (ETHERMTU + sizeof (struct ether_header) + 4)
#define MINPACKETSIZE 64
#define QT_WCSR(csr, val) \
bus_space_write_2(sc->sc_iot, sc->sc_ioh, csr, val)
#define QT_RCSR(csr) \
bus_space_read_2(sc->sc_iot, sc->sc_ioh, csr)
#define loint(x) ((int)(x) & 0xffff)
#define hiint(x) (((int)(x) >> 16) & 0x3f)
#define XNAME sc->sc_dev.dv_xname
/*
* Check if this card is a turbo delqa.
*/
int
qtmatch(struct device *parent, struct cfdata *cf, void *aux)
{
struct qt_softc ssc;
struct qt_softc *sc = &ssc;
struct uba_attach_args *ua = aux;
struct uba_softc *ubasc = (struct uba_softc *)parent;
struct qt_init *qi;
struct ubinfo ui;
sc->sc_iot = ua->ua_iot;
sc->sc_ioh = ua->ua_ioh;
if (qtturbo(sc) == 0)
return 0; /* Not a turbo card */
/* Force the card to interrupt */
ui.ui_size = sizeof(struct qt_init);
if (ubmemalloc((void *)parent, &ui, 0))
return 0; /* Failed */
qi = (struct qt_init *)ui.ui_vaddr;
memset(qi, 0, sizeof(struct qt_init));
qi->vector = ubasc->uh_lastiv - 4;
qi->options = INIT_OPTIONS_INT;
QT_WCSR(CSR_IBAL, loint(ui.ui_baddr));
QT_WCSR(CSR_IBAH, hiint(ui.ui_baddr));
QT_WCSR(CSR_SRQR, 2);
delay(100000); /* Wait some time for interrupt */
QT_WCSR(CSR_SRQR, 3); /* Stop card */
ubmemfree((void *)parent, &ui);
return 10;
}
/*
* Interface exists. More accurately, something exists at the CSR (see
* sys/sys_net.c) -- there's no guarantee it's a DELQA-YM.
*
* The ring descriptors are initialized, the buffers allocated using first the
* DMA region allocated at network load time and then later main memory. The
* INIT block is filled in and the device is poked/probed to see if it really
* is a DELQA-YM. If the device is not a -YM then a message is printed and
* the 'if_attach' call is skipped. For a -YM the START command is issued,
* but the device is not marked as running|up - that happens at interrupt level
* when the device interrupts to say it has started.
*/
void
qtattach(struct device *parent, struct device *self, void *aux)
{
struct uba_softc *ubasc = (struct uba_softc *)parent;
register struct qt_softc *sc = (struct qt_softc *)self;
register struct ifnet *ifp = &sc->is_if;
struct uba_attach_args *ua = aux;
uba_intr_establish(ua->ua_icookie, ua->ua_cvec, qtintr, sc,
&sc->sc_intrcnt);
evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, ua->ua_evcnt,
sc->sc_dev.dv_xname, "intr");
sc->sc_iot = ua->ua_iot;
sc->sc_ioh = ua->ua_ioh;
ubasc->uh_lastiv -= 4;
sc->vector = ubasc->uh_lastiv;
/*
* Now allocate the buffers and initialize the buffers. This should _never_
* fail because main memory is allocated after the DMA pool is used up.
*/
sc->is_addr[0] = QT_RCSR(0);
sc->is_addr[1] = QT_RCSR(2);
sc->is_addr[2] = QT_RCSR(4);
sc->is_addr[3] = QT_RCSR(6);
sc->is_addr[4] = QT_RCSR(8);
sc->is_addr[5] = QT_RCSR(10);
strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST|IFF_MULTICAST;
ifp->if_ioctl = qtioctl;
ifp->if_start = qtstart;
ifp->if_init = qtinit;
ifp->if_stop = qtstop;
IFQ_SET_READY(&ifp->if_snd);
printf("\n%s: delqa-plus in Turbo mode, hardware address %s\n",
XNAME, ether_sprintf(sc->is_addr));
if_attach(ifp);
ether_ifattach(ifp, sc->is_addr);
}
int
qtturbo(sc)
register struct qt_softc *sc;
{
register int i;
/*
* Issue the software reset. Delay 150us. The board should now be in
* DELQA-Normal mode. Set ITB and DEQTA select. If both bits do not
* stay turned on then the board is not a DELQA-YM.
*/
QT_WCSR(CSR_ARQR, ARQR_SR);
QT_WCSR(CSR_ARQR, 0);
delay(150L);
QT_WCSR(CSR_SRR, 0x8001); /* MS | ITB */
i = QT_RCSR(CSR_SRR);
QT_WCSR(CSR_SRR, 0x8000); /* Turn off ITB, set DELQA select */
if (i != 0x8001)
{
printf("qt !-YM\n");
return(0);
}
/*
* Board is a DELQA-YM. Send the commands to enable Turbo mode. Delay
* 1 second, testing the SRR register every millisecond to see if the
* board has shifted to Turbo mode.
*/
QT_WCSR(CSR_XCR0, 0x0baf);
QT_WCSR(CSR_XCR1, 0xff00);
for (i = 0; i < 1000; i++)
{
if ((QT_RCSR(CSR_SRR) & SRR_RESP) == 1)
break;
delay(1000L);
}
if (i >= 1000)
{
printf("qt !Turbo\n");
return(0);
}
return(1);
}
int
qtinit(struct ifnet *ifp)
{
register struct qt_softc *sc = ifp->if_softc;
register struct qt_init *iniblk;
struct ifrw *ifrw;
struct ifxmt *ifxp;
struct qt_rring *rp;
struct qt_tring *tp;
register int i, error;
if (ifp->if_flags & IFF_RUNNING)
return 0; /* Already in good shape */
if (sc->sc_ib == NULL) {
if (if_ubaminit(&sc->sc_ifuba, (void *)sc->sc_dev.dv_parent,
MCLBYTES, sc->sc_ifr, NRCV, sc->sc_ifw, NXMT)) {
printf("%s: can't initialize\n", XNAME);
ifp->if_flags &= ~IFF_UP;
return 0;
}
sc->sc_ui.ui_size = sizeof(struct qt_cdata);
if ((error = ubmemalloc((void *)sc->sc_dev.dv_parent,
&sc->sc_ui, 0))) {
printf(": failed ubmemalloc(), error = %d\n", error);
return error;
}
sc->sc_ib = (struct qt_cdata *)sc->sc_ui.ui_vaddr;
sc->sc_pib = (struct qt_cdata *)sc->sc_ui.ui_baddr;
/*
* Fill in most of the INIT block: vector, options (interrupt enable), ring
* locations. The physical address is copied from the ROMs as part of the
* -YM testing proceedure. The CSR is saved here rather than in qtinit()
* because the qtturbo() routine needs it.
*
* The INIT block must be quadword aligned. Using malloc() guarantees click
* (64 byte) alignment. Since the only time the INIT block is referenced is
* at 'startup' or 'reset' time there is really no time penalty (and a modest
* D space savings) involved.
*/
memset(sc->sc_ib, 0, sizeof(struct qt_cdata));
iniblk = &sc->sc_ib->qc_init;
iniblk->vector = sc->vector;
memcpy(iniblk->paddr, sc->is_addr, 6);
iniblk->options = INIT_OPTIONS_INT;
iniblk->rx_lo = loint(&sc->sc_pib->qc_r);
iniblk->rx_hi = hiint(&sc->sc_pib->qc_r);
iniblk->tx_lo = loint(&sc->sc_pib->qc_t);
iniblk->tx_hi = hiint(&sc->sc_pib->qc_t);
}
iniblk = &sc->sc_ib->qc_init;
iniblk->mode = ifp->if_flags & IFF_PROMISC ? INIT_MODE_PRO : 0;
/*
* Now initialize the receive ring descriptors. Because this routine can be
* called with outstanding I/O operations we check the ring descriptors for
* a non-zero 'rhost0' (or 'thost0') word and place those buffers back on
* the free list.
*/
for (i = 0; i < NRCV; i++) {
rp = &sc->sc_ib->qc_r[i];
ifrw = &sc->sc_ifr[i];
rp->rmd1 = MCLBYTES;
rp->rmd4 = loint(ifrw->ifrw_info);
rp->rmd5 = hiint(ifrw->ifrw_info);
rp->rmd3 = 0; /* clear RMD3_OWN */
}
for (i = 0; i < NXMT; i++) {
tp = &sc->sc_ib->qc_t[i];
ifxp = &sc->sc_ifw[i];
tp->tmd4 = loint(ifxp->ifw_info);
tp->tmd5 = hiint(ifxp->ifw_info);
tp->tmd3 = TMD3_OWN;
}
sc->xnext = sc->xlast = sc->nxmit = 0;
sc->rindex = 0;
sc->nxtrcv = 0;
sc->nrcv = 0;
/*
* Now we tell the device the address of the INIT block. The device
* _must_ be in the Turbo mode at this time. The "START" command is
* then issued to the device. A 1 second timeout is then started.
* When the interrupt occurs the IFF_UP|IFF_RUNNING state is entered and
* full operations will proceed. If the timeout expires without an interrupt
* being received an error is printed, the flags cleared and the device left
* marked down.
*/
QT_WCSR(CSR_IBAL, loint(&sc->sc_pib->qc_init));
QT_WCSR(CSR_IBAH, hiint(&sc->sc_pib->qc_init));
QT_WCSR(CSR_SRQR, 2);
sc->is_if.if_flags |= IFF_RUNNING;
return 0;
}
/*
* Start output on interface.
*/
void
qtstart(struct ifnet *ifp)
{
int len, nxmit;
register struct qt_softc *sc = ifp->if_softc;
register struct qt_tring *rp;
struct mbuf *m = NULL;
for (nxmit = sc->nxmit; nxmit < NXMT; nxmit++) {
IF_DEQUEUE(&sc->is_if.if_snd, m);
if (m == 0)
break;
rp = &sc->sc_ib->qc_t[sc->xnext];
if ((rp->tmd3 & TMD3_OWN) == 0)
panic("qtstart");
#if NBPFILTER > 0
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m);
#endif
len = if_ubaput(&sc->sc_ifuba, &sc->sc_ifw[sc->xnext], m);
if (len < MINPACKETSIZE)
len = MINPACKETSIZE;
rp->tmd3 = len & TMD3_BCT; /* set length,clear ownership */
QT_WCSR(CSR_ARQR, ARQR_TRQ); /* tell device it has buffer */
if (++sc->xnext >= NXMT)
sc->xnext = 0;
}
if (sc->nxmit != nxmit)
sc->nxmit = nxmit;
/* XXX - set OACTIVE */
}
/*
* General interrupt service routine. Receive, transmit, device start
* interrupts and timeouts come here. Check for hard device errors and print a
* message if any errors are found. If we are waiting for the device to
* START then check if the device is now running.
*/
void
qtintr(void *arg)
{
struct qt_softc *sc = arg;
struct ifnet *ifp = &sc->is_if;
short status;
status = QT_RCSR(CSR_SRR);
if (status < 0)
/* should we reset the device after a bunch of these errs? */
qtsrr(sc, status);
if ((ifp->if_flags & IFF_UP) == 0)
return; /* Unwanted interrupt */
qtrint(sc);
qttint(sc);
qtstart(&sc->is_ec.ec_if);
}
/*
* Transmit interrupt service. Only called if there are outstanding transmit
* requests which could have completed. The DELQA-YM doesn't provide the
* status bits telling the kind (receive, transmit) of interrupt.
*/
#define BBLMIS (TMD2_BBL|TMD2_MIS)
void
qttint(struct qt_softc *sc)
{
register struct qt_tring *rp;
while (sc->nxmit > 0)
{
rp = &sc->sc_ib->qc_t[sc->xlast];
if ((rp->tmd3 & TMD3_OWN) == 0)
break;
sc->is_if.if_opackets++;
/*
* Collisions don't count as output errors, but babbling and missing packets
* do count as output errors.
*/
if (rp->tmd2 & TMD2_CER)
sc->is_if.if_collisions++;
if ((rp->tmd0 & TMD0_ERR1) ||
((rp->tmd2 & TMD2_ERR2) && (rp->tmd2 & BBLMIS)))
{
#ifdef QTDEBUG
char buf[100];
bitmask_snprintf(rp->tmd2, TMD2_BITS, buf, 100);
printf("%s: tmd2 %s\n", XNAME, buf);
#endif
sc->is_if.if_oerrors++;
}
if_ubaend(&sc->sc_ifuba, &sc->sc_ifw[sc->xlast]);
if (++sc->xlast >= NXMT)
sc->xlast = 0;
sc->nxmit--;
}
}
/*
* Receive interrupt service. Pull packet off the interface and put into
* a mbuf chain for processing later.
*/
void
qtrint(struct qt_softc *sc)
{
register struct qt_rring *rp;
struct ifnet *ifp = &sc->is_ec.ec_if;
struct mbuf *m;
int len;
while (sc->sc_ib->qc_r[(int)sc->rindex].rmd3 & RMD3_OWN)
{
rp = &sc->sc_ib->qc_r[(int)sc->rindex];
if ((rp->rmd0 & (RMD0_STP|RMD0_ENP)) != (RMD0_STP|RMD0_ENP))
{
printf("%s: chained packet\n", XNAME);
sc->is_if.if_ierrors++;
goto rnext;
}
len = (rp->rmd1 & RMD1_MCNT) - 4; /* -4 for CRC */
sc->is_if.if_ipackets++;
if ((rp->rmd0 & RMD0_ERR3) || (rp->rmd2 & RMD2_ERR4))
{
#ifdef QTDEBUG
char buf[100];
bitmask_snprintf(rp->rmd0, RMD0_BITS, buf, 100);
printf("%s: rmd0 %s\n", XNAME, buf);
bitmask_snprintf(rp->rmd2, RMD2_BITS, buf, 100);
printf("%s: rmd2 %s\n", XNAME, buf);
#endif
sc->is_if.if_ierrors++;
goto rnext;
}
m = if_ubaget(&sc->sc_ifuba, &sc->sc_ifr[(int)sc->rindex],
ifp, len);
if (m == 0) {
sc->is_if.if_ierrors++;
goto rnext;
}
#if NBPFILTER > 0
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m);
#endif
(*ifp->if_input)(ifp, m);
rnext:
--sc->nrcv;
rp->rmd3 = 0;
rp->rmd1 = MCLBYTES;
if (++sc->rindex >= NRCV)
sc->rindex = 0;
}
QT_WCSR(CSR_ARQR, ARQR_RRQ); /* tell device it has buffer */
}
int
qtioctl(ifp, cmd, data)
register struct ifnet *ifp;
u_long cmd;
caddr_t data;
{
int error, flags;
int s = splnet();
flags = ifp->if_flags & IFF_PROMISC;
error = ether_ioctl(ifp, cmd, data);
if (error == ENETRESET || (ifp->if_flags ^ flags)) {
qtstop(ifp, 1);
qtinit(ifp);
error = 0;
}
splx(s);
return (error);
}
void
qtsrr(sc, srrbits)
struct qt_softc *sc;
int srrbits;
{
char buf[100];
bitmask_snprintf(srrbits, SRR_BITS, buf, sizeof buf);
printf("%s: srr=%s\n", sc->sc_dev.dv_xname, buf);
}
/*
* Stop activity on the interface.
* Lose outstanding transmit requests. XXX - not good for multicast.
*/
void
qtstop(struct ifnet *ifp, int disable)
{
struct qt_softc *sc = ifp->if_softc;
int i;
QT_WCSR(CSR_SRQR, 3);
for (i = 0; i < 100; i++)
if ((QT_RCSR(CSR_SRR) & SRR_RESP) == 3)
break;
if (QT_RCSR(CSR_SRR) & SRR_FES)
qtsrr(sc, QT_RCSR(CSR_SRR));
/* Forget already queued transmit requests */
while (sc->nxmit > 0) {
if_ubaend(&sc->sc_ifuba, &sc->sc_ifw[sc->xlast]);
if (++sc->xlast >= NXMT)
sc->xlast = 0;
sc->nxmit--;
}
/* Handle late received packets */
qtrint(sc);
ifp->if_flags &= ~IFF_RUNNING;
}
#ifdef notyet
/*
* Reset the device. This moves it from DELQA-T mode to DELQA-Normal mode.
* After the reset put the device back in -T mode. Then call qtinit() to
* reinitialize the ring structures and issue the 'timeout' for the "device
* started interrupt".
*/
void
qtreset(sc)
register struct qt_softc *sc;
{
qtturbo(sc);
qtinit(&sc->is_ec.ec_if);
}
#endif