NetBSD/gnu/dist/toolchain/gcc/reload.h

345 lines
13 KiB
C

/* Communication between reload.c and reload1.c.
Copyright (C) 1987, 91-95, 97, 1998 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* If secondary reloads are the same for inputs and outputs, define those
macros here. */
#ifdef SECONDARY_RELOAD_CLASS
#define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X) \
SECONDARY_RELOAD_CLASS (CLASS, MODE, X)
#define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, X) \
SECONDARY_RELOAD_CLASS (CLASS, MODE, X)
#endif
/* If either macro is defined, show that we need secondary reloads. */
#if defined(SECONDARY_INPUT_RELOAD_CLASS) || defined(SECONDARY_OUTPUT_RELOAD_CLASS)
#define HAVE_SECONDARY_RELOADS
#endif
/* If MEMORY_MOVE_COST isn't defined, give it a default here. */
#ifndef MEMORY_MOVE_COST
#ifdef HAVE_SECONDARY_RELOADS
#define MEMORY_MOVE_COST(MODE,CLASS,IN) \
(4 + memory_move_secondary_cost ((MODE), (CLASS), (IN)))
#else
#define MEMORY_MOVE_COST(MODE,CLASS,IN) 4
#endif
#endif
extern int memory_move_secondary_cost PROTO ((enum machine_mode, enum reg_class, int));
/* See reload.c and reload1.c for comments on these variables. */
/* Maximum number of reloads we can need. */
#define MAX_RELOADS (2 * MAX_RECOG_OPERANDS * (MAX_REGS_PER_ADDRESS + 1))
extern rtx reload_in[MAX_RELOADS];
extern rtx reload_out[MAX_RELOADS];
extern rtx reload_in_reg[MAX_RELOADS];
extern rtx reload_out_reg[MAX_RELOADS];
extern enum reg_class reload_reg_class[MAX_RELOADS];
extern enum machine_mode reload_inmode[MAX_RELOADS];
extern enum machine_mode reload_outmode[MAX_RELOADS];
extern char reload_optional[MAX_RELOADS];
extern char reload_nongroup[MAX_RELOADS];
extern int reload_inc[MAX_RELOADS];
extern int reload_opnum[MAX_RELOADS];
extern int reload_secondary_p[MAX_RELOADS];
extern int reload_secondary_in_reload[MAX_RELOADS];
extern int reload_secondary_out_reload[MAX_RELOADS];
#ifdef MAX_INSN_CODE
extern enum insn_code reload_secondary_in_icode[MAX_RELOADS];
extern enum insn_code reload_secondary_out_icode[MAX_RELOADS];
#endif
extern int n_reloads;
extern rtx reload_reg_rtx[MAX_RELOADS];
/* Encode the usage of a reload. The following codes are supported:
RELOAD_FOR_INPUT reload of an input operand
RELOAD_FOR_OUTPUT likewise, for output
RELOAD_FOR_INSN a reload that must not conflict with anything
used in the insn, but may conflict with
something used before or after the insn
RELOAD_FOR_INPUT_ADDRESS reload for parts of the address of an object
that is an input reload
RELOAD_FOR_INPADDR_ADDRESS reload needed for RELOAD_FOR_INPUT_ADDRESS
RELOAD_FOR_OUTPUT_ADDRESS like RELOAD_FOR INPUT_ADDRESS, for output
RELOAD_FOR_OUTADDR_ADDRESS reload needed for RELOAD_FOR_OUTPUT_ADDRESS
RELOAD_FOR_OPERAND_ADDRESS reload for the address of a non-reloaded
operand; these don't conflict with
any other addresses.
RELOAD_FOR_OPADDR_ADDR reload needed for RELOAD_FOR_OPERAND_ADDRESS
reloads; usually secondary reloads
RELOAD_OTHER none of the above, usually multiple uses
RELOAD_FOR_OTHER_ADDRESS reload for part of the address of an input
that is marked RELOAD_OTHER.
This used to be "enum reload_when_needed" but some debuggers have trouble
with an enum tag and variable of the same name. */
enum reload_type
{
RELOAD_FOR_INPUT, RELOAD_FOR_OUTPUT, RELOAD_FOR_INSN,
RELOAD_FOR_INPUT_ADDRESS, RELOAD_FOR_INPADDR_ADDRESS,
RELOAD_FOR_OUTPUT_ADDRESS, RELOAD_FOR_OUTADDR_ADDRESS,
RELOAD_FOR_OPERAND_ADDRESS, RELOAD_FOR_OPADDR_ADDR,
RELOAD_OTHER, RELOAD_FOR_OTHER_ADDRESS
};
extern enum reload_type reload_when_needed[MAX_RELOADS];
extern rtx *reg_equiv_constant;
extern rtx *reg_equiv_memory_loc;
extern rtx *reg_equiv_address;
extern rtx *reg_equiv_mem;
/* All the "earlyclobber" operands of the current insn
are recorded here. */
extern int n_earlyclobbers;
extern rtx reload_earlyclobbers[MAX_RECOG_OPERANDS];
/* Save the number of operands. */
extern int reload_n_operands;
/* First uid used by insns created by reload in this function.
Used in find_equiv_reg. */
extern int reload_first_uid;
/* Nonzero if indirect addressing is supported when the innermost MEM is
of the form (MEM (SYMBOL_REF sym)). It is assumed that the level to
which these are valid is the same as spill_indirect_levels, above. */
extern char indirect_symref_ok;
/* Nonzero if an address (plus (reg frame_pointer) (reg ...)) is valid. */
extern char double_reg_address_ok;
extern int num_not_at_initial_offset;
#ifdef MAX_INSN_CODE
/* These arrays record the insn_code of insns that may be needed to
perform input and output reloads of special objects. They provide a
place to pass a scratch register. */
extern enum insn_code reload_in_optab[];
extern enum insn_code reload_out_optab[];
#endif
struct needs
{
/* [0] is normal, [1] is nongroup. */
short regs[2][N_REG_CLASSES];
short groups[N_REG_CLASSES];
};
#if defined SET_HARD_REG_BIT && defined CLEAR_REG_SET
/* This structure describes instructions which are relevant for reload.
Apart from all regular insns, this also includes CODE_LABELs, since they
must be examined for register elimination. */
struct insn_chain
{
/* Links to the neighbour instructions. */
struct insn_chain *next, *prev;
/* Link through a chains set up by calculate_needs_all_insns, containing
all insns that need reloading. */
struct insn_chain *next_need_reload;
/* The basic block this insn is in. */
int block;
/* The rtx of the insn. */
rtx insn;
/* Register life information: record all live hard registers, and all
live pseudos that have a hard register.
This information is recorded for the point immediately before the insn
(in live_before), and for the point within the insn at which all
outputs have just been written to (in live_after). */
regset live_before;
regset live_after;
/* For each class, size of group of consecutive regs
that is needed for the reloads of this class. */
char group_size[N_REG_CLASSES];
/* For each class, the machine mode which requires consecutive
groups of regs of that class.
If two different modes ever require groups of one class,
they must be the same size and equally restrictive for that class,
otherwise we can't handle the complexity. */
enum machine_mode group_mode[N_REG_CLASSES];
/* Indicates if a register was counted against the need for
groups. 0 means it can count against max_nongroup instead. */
HARD_REG_SET counted_for_groups;
/* Indicates if a register was counted against the need for
non-groups. 0 means it can become part of a new group.
During choose_reload_regs, 1 here means don't use this reg
as part of a group, even if it seems to be otherwise ok. */
HARD_REG_SET counted_for_nongroups;
/* Indicates which registers have already been used for spills. */
HARD_REG_SET used_spill_regs;
/* Describe the needs for reload registers of this insn. */
struct needs need;
/* Nonzero if find_reloads said the insn requires reloading. */
unsigned int need_reload:1;
/* Nonzero if find_reloads needs to be run during reload_as_needed to
perform modifications on any operands. */
unsigned int need_operand_change:1;
/* Nonzero if eliminate_regs_in_insn said it requires eliminations. */
unsigned int need_elim:1;
/* Nonzero if this insn was inserted by perform_caller_saves. */
unsigned int is_caller_save_insn:1;
};
/* A chain of insn_chain structures to describe all non-note insns in
a function. */
extern struct insn_chain *reload_insn_chain;
/* Allocate a new insn_chain structure. */
extern struct insn_chain *new_insn_chain PROTO((void));
extern void compute_use_by_pseudos PROTO((HARD_REG_SET *, regset));
#endif
/* Functions from reload.c: */
/* Return a memory location that will be used to copy X in mode MODE.
If we haven't already made a location for this mode in this insn,
call find_reloads_address on the location being returned. */
extern rtx get_secondary_mem PROTO((rtx, enum machine_mode,
int, enum reload_type));
/* Clear any secondary memory locations we've made. */
extern void clear_secondary_mem PROTO((void));
/* Transfer all replacements that used to be in reload FROM to be in
reload TO. */
extern void transfer_replacements PROTO((int, int));
/* IN_RTX is the value loaded by a reload that we now decided to inherit,
or a subpart of it. If we have any replacements registered for IN_RTX,
chancel the reloads that were supposed to load them.
Return non-zero if we chanceled any reloads. */
extern int remove_address_replacements PROTO((rtx in_rtx));
/* Like rtx_equal_p except that it allows a REG and a SUBREG to match
if they are the same hard reg, and has special hacks for
autoincrement and autodecrement. */
extern int operands_match_p PROTO((rtx, rtx));
/* Return 1 if altering OP will not modify the value of CLOBBER. */
extern int safe_from_earlyclobber PROTO((rtx, rtx));
/* Search the body of INSN for values that need reloading and record them
with push_reload. REPLACE nonzero means record also where the values occur
so that subst_reloads can be used. */
extern int find_reloads PROTO((rtx, int, int, int, short *));
/* Compute the sum of X and Y, making canonicalizations assumed in an
address, namely: sum constant integers, surround the sum of two
constants with a CONST, put the constant as the second operand, and
group the constant on the outermost sum. */
extern rtx form_sum PROTO((rtx, rtx));
/* Substitute into the current INSN the registers into which we have reloaded
the things that need reloading. */
extern void subst_reloads PROTO((void));
/* Make a copy of any replacements being done into X and move those copies
to locations in Y, a copy of X. We only look at the highest level of
the RTL. */
extern void copy_replacements PROTO((rtx, rtx));
/* Change any replacements being done to *X to be done to *Y */
extern void move_replacements PROTO((rtx *x, rtx *y));
/* If LOC was scheduled to be replaced by something, return the replacement.
Otherwise, return *LOC. */
extern rtx find_replacement PROTO((rtx *));
/* Return nonzero if register in range [REGNO, ENDREGNO)
appears either explicitly or implicitly in X
other than being stored into. */
extern int refers_to_regno_for_reload_p PROTO((int, int, rtx, rtx *));
/* Nonzero if modifying X will affect IN. */
extern int reg_overlap_mentioned_for_reload_p PROTO((rtx, rtx));
/* Return nonzero if anything in X contains a MEM. Look also for pseudo
registers. */
extern int refers_to_mem_for_reload_p PROTO((rtx));
/* Check the insns before INSN to see if there is a suitable register
containing the same value as GOAL. */
extern rtx find_equiv_reg PROTO((rtx, rtx, enum reg_class, int, short *,
int, enum machine_mode));
/* Return 1 if register REGNO is the subject of a clobber in insn INSN. */
extern int regno_clobbered_p PROTO((int, rtx));
/* Functions in reload1.c: */
extern int reloads_conflict PROTO ((int, int));
int count_occurrences PROTO((rtx, rtx));
/* Initialize the reload pass once per compilation. */
extern void init_reload PROTO((void));
/* The reload pass itself. */
extern int reload PROTO((rtx, int, FILE *));
/* Mark the slots in regs_ever_live for the hard regs
used by pseudo-reg number REGNO. */
extern void mark_home_live PROTO((int));
/* Scan X and replace any eliminable registers (such as fp) with a
replacement (such as sp), plus an offset. */
extern rtx eliminate_regs PROTO((rtx, enum machine_mode, rtx));
/* Emit code to perform a reload from IN (which may be a reload register) to
OUT (which may also be a reload register). IN or OUT is from operand
OPNUM with reload type TYPE. */
extern rtx gen_reload PROTO((rtx, rtx, int, enum reload_type));
/* Deallocate the reload register used by reload number R. */
extern void deallocate_reload_reg PROTO((int r));
/* Functions in caller-save.c: */
/* Initialize for caller-save. */
extern void init_caller_save PROTO((void));
/* Initialize save areas by showing that we haven't allocated any yet. */
extern void init_save_areas PROTO((void));
/* Allocate save areas for any hard registers that might need saving. */
extern void setup_save_areas PROTO((void));
/* Find the places where hard regs are live across calls and save them. */
extern void save_call_clobbered_regs PROTO((void));
/* Replace (subreg (reg)) with the appropriate (reg) for any operands. */
extern void cleanup_subreg_operands PROTO ((rtx));