NetBSD/sys/arch/mipsco/include/prom.h

327 lines
12 KiB
C

/* $NetBSD: prom.h,v 1.5 2000/12/03 04:51:04 matt Exp $ */
/*
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Wayne Knowles
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Entry points into PROM firmware functions for MIPS machines
*/
#ifndef _MIPSCO_PROM_H
#define _MIPSCO_PROM_H
#ifndef _LOCORE
#include <sys/types.h>
#include <sys/cdefs.h>
struct mips_prom {
/*
* transferred to on hardware reset, configures MIPS boards,
* runs diags, check for appropriate auto boot action in
* "bootmode" environment variable and performs that action.
*/
void (*prom_reset) __P((void)) __attribute__((__noreturn__));
/*
* called to utilize prom to boot new image. After the booted
* program returns control can either be returned to the
* original caller of the exec routine or to the prom monitor.
* (to return to the original caller, the new program must
* not destroy any text, data, or stack of the parent. the
* new programs stack continues on the parents stack.
*/
int (*prom_exec) __P((void));
/* re-enter the prom command parser, do not reset prom state */
void (*prom_restart) __P((void)) __attribute__((__noreturn__));
/* reinitialize prom state and re-enter the prom command parser */
void (*prom_reinit) __P((void)) __attribute__((__noreturn__));
/* reboot machine using current bootmode setting. No diags */
void (*prom_reboot) __P((void)) __attribute__((__noreturn__));
/* perform an autoboot sequence, no configuration or diags run */
void (*prom_autoboot) __P((void)) __attribute__((__noreturn__));
/*
* these routines access prom "saio" routines, and may be used
* by standalone programs that would like to use prom io
*/
int (*prom_open) __P((char *, int, ...));
int (*prom_read) __P((int, void *, int));
int (*prom_write) __P((int, void *, int));
int (*prom_ioctl) __P((int, long, ...));
int (*prom_close) __P((int));
int (*prom_getchar) __P((void));
int (*prom_putchar) __P((int c));
void (*prom_showchar) __P((int c));
char * (*prom_gets) __P((char *s));
void (*prom_puts) __P((const char *));
int (*prom_printf) __P((const char *, ...));
/* prom protocol entry points */
void (*prom_initproto) __P((void)); /* ??? */
void (*prom_protoenable) __P((void)); /* ??? */
void (*prom_protodisable) __P((void)); /* ??? */
void (*prom_getpkt) __P((void)); /* ??? */
void (*prom_putpkt) __P((void)); /* ??? */
/*
* read-modify-write routine use special cpu board circuitry to
* accomplish vme bus r-m-w cycles.
*/
void (*prom_orw_rmw) __P((void));
void (*prom_orh_rmw) __P((void));
void (*prom_orb_rmw) __P((void));
void (*prom_andw_rmw) __P((void));
void (*prom_andh_rmw) __P((void));
void (*prom_andb_rmw) __P((void));
/*
* cache control entry points
* flushcache is called without arguments and invalidates entire
* contents of both i and d caches
* clearcache is called with a base address and length (where
* address is either K0, K1, or physical) and clears both
* i and d cache for entries that alias to specified address
* range.
*/
void (*prom_flushcache) __P((void));
void (*prom_clearcache) __P((void *, size_t));
/*
* Libc compatible functions
*/
void (*prom_setjmp) __P((void));
void (*prom_longjmp) __P((void));
void (*prom_bevutlb) __P((void));
char * (*prom_getenv) __P((char *name));
int (*prom_setenv) __P((char *name, char *val));
int (*prom_atob) __P((char *s));
int (*prom_strcmp) __P((char *s1, char *s2));
int (*prom_strlen) __P((char *s));
char * (*prom_strcpy) __P((char *s1, char *s2));
char * (*prom_strcat) __P((char *s1, char *s2));
/*
* command parser entry points
*/
void (*prom_parser) __P((void)); /* ??? */
void (*prom_range) __P((void)); /* ??? */
void (*prom_argvize) __P((void)); /* ??? */
void (*prom_help) __P((void));
/*
* prom commands
*/
void (*prom_dumpcmd) __P((void));
void (*prom_setenvcmd) __P((void));
void (*prom_unsetenvcmd) __P((void));
void (*prom_bevexcept) __P((void));
void (*prom_enablecmd) __P((void));
void (*prom_disablecmd) __P((void));
/*
* clear existing fault handlers
* used by clients that link to prom on situations where client has
* interrupted out of prom code and wish to reenter without being
* tripped up by any pending prom timers set earlier.
*/
void (*prom_clearnofault) __P((void));
void (*prom_notimpl) __P((void));
/*
* PROM_NVGET, PROM_NVSET will get/set information in the NVRAM.
* Both of these routines take indexes as opposed to addresses
* to guarantee portability between various platforms
*/
int (*prom_nvget) __P((int));
void (*prom_nvset) __P((void));
};
extern struct mips_prom *callv;
extern void prom_init __P((void));
#endif /* _LOCORE */
/*
* Macro to help call a prom function
*/
#define MIPS_PROM(func) (callv->prom_##func)
/*
* Return the address for a given prom function number
*/
#define MIPS_PROM_ENTRY(x) (0xbfc00000+((x)*8))
/*
* MIPS PROM firmware functions:
*
* MIPS_PROM_RESET Run diags, check bootmode, reinit.
* MIPS_PROM_EXEC Load new program image.
* MIPS_PROM_RESTART Re-enter monitor command loop.
* MIPS_PROM_REINIT Re-init monitor, then cmd loop.
* MIPS_PROM_REBOOT Check bootmode, no config.
* MIPS_PROM_AUTOBOOT Autoboot the system.
*
* The following routines access PROM saio routines and may be used by
* standalone programs that would like to use PROM I/O:
*
* MIPS_PROM_OPEN Open a file.
* MIPS_PROM_READ Read from a file.
* MIPS_PROM_WRITE Write to a file.
* MIPS_PROM_IOCTL Ioctl on a file.
* MIPS_PROM_CLOSE Close a file.
* MIPS_PROM_GETCHAR Read character from console.
* MIPS_PROM_PUTCHAR Put character on console.
* MIPS_PROM_SHOWCHAR Show a char visibly.
* MIPS_PROM_GETS gets with editing.
* MIPS_PROM_PUTS Put string to console.
* MIPS_PROM_PRINTF Kernel style printf to console.
*
* PROM protocol entry points:
*
* MIPS_PROM_INITPROTO Initialize protocol.
* MIPS_PROM_PROTOENABLE Enable protocol mode.
* MIPS_PROM_PROTODISABLE Disable protocol mode.
* MIPS_PROM_GETPKT Get protocol packet.
* MIPS_PROM_PUTPKT Put protocol packet.
*
* Atomic Read-Modify-Write functions
*
* MIPS_PROM_RMW_OR32 r-m-w OR word.
* MIPS_PROM_RMW_OR16 r-m-w OR halfword.
* MIPS_PROM_RMW_OR8 r-m-w OR or byte.
* MIPS_PROM_RMW_AND32 r-m-w AND word.
* MIPS_PROM_RMW_AND16 r-m-w AND halfword.
* MIPS_PROM_RMW_AND8 r-m-w AND byte.
*
* MIPS_PROM_FLUSHCACHE Flush entire cache ().
* MIPS_PROM_CLEARCACHE Clear I & D cache in range (addr, len).
* MIPS_PROM_SETJMP Save registers in a buffer.
* MIPS_PROM_LONGJMP Get register back from buffer.
* MIPS_PROM_BEVUTLB utlbmiss boot exception vector
* MIPS_PROM_GETENV Gets a string from system environment.
* MIPS_PROM_SETENV Sets a string in system environment.
* MIPS_PROM_ATOB Converts ascii string to number.
* MIPS_PROM_STRCMP Compares strings (strcmp).
* MIPS_PROM_STRLEN Length of string (strlen).
* MIPS_PROM_STRCPY Copies string (strcpy).
* MIPS_PROM_STRCAT Appends string (strcat).
* MIPS_PROM_PARSER Command parser.
* MIPS_PROM_RANGE Address range parser
* MIPS_PROM_ARGVIZE Parses string to argc,argv.
* MIPS_PROM_HELP Help on prom commands.
* MIPS_PROM_DUMP Dump memory command.
* MIPS_PROM_SETENVCMD Setenv command.
* MIPS_PROM_UNSETENVCMD Unsetenv command.
* MIPS_PROM_PRINTENV Print environment command.
* MIPS_PROM_BEVEXCEPT General boot exception vector
* MIPS_PROM_ENABLE Performs prom enable command.
* MIPS_PROM_DISABLE Performs prom disable command.
* MIPS_PROM_CLEARNOFAULT Clear existing fault handlers.
* MIPS_PROM_NOTIMPL Guaranteed to be not implemented
* MIPS_PROM_NVGET Read bytes from NVRAM
* MIPS_PROM_NVSET Write bytes to NVRAM
*/
#define MIPS_PROM_RESET MIPS_PROM_ENTRY(0)
#define MIPS_PROM_EXEC MIPS_PROM_ENTRY(1)
#define MIPS_PROM_RESTART MIPS_PROM_ENTRY(2)
#define MIPS_PROM_REINIT MIPS_PROM_ENTRY(3)
#define MIPS_PROM_REBOOT MIPS_PROM_ENTRY(4)
#define MIPS_PROM_AUTOBOOT MIPS_PROM_ENTRY(5)
#define MIPS_PROM_OPEN MIPS_PROM_ENTRY(6)
#define MIPS_PROM_READ MIPS_PROM_ENTRY(7)
#define MIPS_PROM_WRITE MIPS_PROM_ENTRY(8)
#define MIPS_PROM_IOCTL MIPS_PROM_ENTRY(9)
#define MIPS_PROM_CLOSE MIPS_PROM_ENTRY(10)
#define MIPS_PROM_GETCHAR MIPS_PROM_ENTRY(11)
#define MIPS_PROM_PUTCHAR MIPS_PROM_ENTRY(12)
#define MIPS_PROM_SHOWCHAR MIPS_PROM_ENTRY(13)
#define MIPS_PROM_GETS MIPS_PROM_ENTRY(14)
#define MIPS_PROM_PUTS MIPS_PROM_ENTRY(15)
#define MIPS_PROM_PRINTF MIPS_PROM_ENTRY(16)
#define MIPS_PROM_INITPROTO MIPS_PROM_ENTRY(17)
#define MIPS_PROM_PROTOENABLE MIPS_PROM_ENTRY(18)
#define MIPS_PROM_PROTODISABLE MIPS_PROM_ENTRY(19)
#define MIPS_PROM_GETPKT MIPS_PROM_ENTRY(20)
#define MIPS_PROM_PUTPKT MIPS_PROM_ENTRY(21)
#define MIPS_PROM_ORW_RMW MIPS_PROM_ENTRY(22)
#define MIPS_PROM_ORH_RMW MIPS_PROM_ENTRY(23)
#define MIPS_PROM_ORB_RMW MIPS_PROM_ENTRY(24)
#define MIPS_PROM_ANDW_RMW MIPS_PROM_ENTRY(25)
#define MIPS_PROM_ANDH_RMW MIPS_PROM_ENTRY(26)
#define MIPS_PROM_ANDB_RMW MIPS_PROM_ENTRY(27)
#define MIPS_PROM_FLUSHCACHE MIPS_PROM_ENTRY(28)
#define MIPS_PROM_CLEARCACHE MIPS_PROM_ENTRY(29)
#define MIPS_PROM_SETJMP MIPS_PROM_ENTRY(30)
#define MIPS_PROM_LONGJMP MIPS_PROM_ENTRY(31)
#define MIPS_PROM_BEVUTLB MIPS_PROM_ENTRY(32)
#define MIPS_PROM_GETENV MIPS_PROM_ENTRY(33)
#define MIPS_PROM_SETENV MIPS_PROM_ENTRY(34)
#define MIPS_PROM_ATOB MIPS_PROM_ENTRY(35)
#define MIPS_PROM_STRCMP MIPS_PROM_ENTRY(36)
#define MIPS_PROM_STRLEN MIPS_PROM_ENTRY(37)
#define MIPS_PROM_STRCPY MIPS_PROM_ENTRY(38)
#define MIPS_PROM_STRCAT MIPS_PROM_ENTRY(39)
#define MIPS_PROM_PARSER MIPS_PROM_ENTRY(40)
#define MIPS_PROM_RANGE MIPS_PROM_ENTRY(41)
#define MIPS_PROM_ARGVIZE MIPS_PROM_ENTRY(42)
#define MIPS_PROM_HELP MIPS_PROM_ENTRY(43)
#define MIPS_PROM_DUMP MIPS_PROM_ENTRY(44)
#define MIPS_PROM_SETENVCMD MIPS_PROM_ENTRY(45)
#define MIPS_PROM_UNSETENVCMD MIPS_PROM_ENTRY(46)
#define MIPS_PROM_PRINTENV MIPS_PROM_ENTRY(47)
#define MIPS_PROM_BEVEXCEPT MIPS_PROM_ENTRY(48)
#define MIPS_PROM_ENABLE MIPS_PROM_ENTRY(49)
#define MIPS_PROM_DISABLE MIPS_PROM_ENTRY(50)
#define MIPS_PROM_CLEARNOFAULT MIPS_PROM_ENTRY(51)
#define MIPS_PROM_NOTIMPLEMENT MIPS_PROM_ENTRY(52)
#define MIPS_PROM_NVGET MIPS_PROM_ENTRY(53)
#define MIPS_PROM_NVSET MIPS_PROM_ENTRY(54)
#ifdef _KERNEL
extern void prom_init (void);
extern int prom_getconsole (void);
#endif
#endif /* ! _MIPSCO_PROM_H */