NetBSD/sys/dev/pci/slide.c

259 lines
7.3 KiB
C

/* $NetBSD: slide.c,v 1.21 2010/11/05 18:07:24 jakllsch Exp $ */
/*-
* Copyright (c) 2002 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: slide.c,v 1.21 2010/11/05 18:07:24 jakllsch Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/pciidereg.h>
#include <dev/pci/pciidevar.h>
#include <dev/pci/pciide_sl82c105_reg.h>
static void sl82c105_chip_map(struct pciide_softc*, struct pci_attach_args*);
static void sl82c105_setup_channel(struct ata_channel*);
static int slide_match(device_t, cfdata_t, void *);
static void slide_attach(device_t, device_t, void *);
CFATTACH_DECL_NEW(slide, sizeof(struct pciide_softc),
slide_match, slide_attach, NULL, NULL);
static const struct pciide_product_desc pciide_symphony_products[] = {
{ PCI_PRODUCT_SYMPHONY_82C105,
0,
"Symphony Labs 82C105 IDE controller",
sl82c105_chip_map,
},
{ 0,
0,
NULL,
NULL,
}
};
static const struct pciide_product_desc pciide_winbond_products[] = {
{ PCI_PRODUCT_WINBOND_W83C553F_1,
0,
"Winbond W83C553F IDE controller",
sl82c105_chip_map,
},
{ 0,
0,
NULL,
NULL,
}
};
static int
slide_match(device_t parent, cfdata_t match, void *aux)
{
struct pci_attach_args *pa = aux;
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SYMPHONY) {
if (pciide_lookup_product(pa->pa_id, pciide_symphony_products))
return (2);
}
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_WINBOND) {
if (pciide_lookup_product(pa->pa_id, pciide_winbond_products))
return (2);
}
return (0);
}
static void
slide_attach(device_t parent, device_t self, void *aux)
{
struct pci_attach_args *pa = aux;
struct pciide_softc *sc = device_private(self);
const struct pciide_product_desc *pp = NULL;
sc->sc_wdcdev.sc_atac.atac_dev = self;
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SYMPHONY)
pp = pciide_lookup_product(pa->pa_id, pciide_symphony_products);
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_WINBOND)
pp = pciide_lookup_product(pa->pa_id, pciide_winbond_products);
if (pp == NULL)
panic("slide_attach");
pciide_common_attach(sc, pa, pp);
}
static int
sl82c105_bugchk(struct pci_attach_args *pa)
{
if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_WINBOND ||
PCI_PRODUCT(pa->pa_id) != PCI_PRODUCT_WINBOND_W83C553F_0)
return (0);
if (PCI_REVISION(pa->pa_class) <= 0x05)
return (1);
return (0);
}
static void
sl82c105_chip_map(struct pciide_softc *sc, struct pci_attach_args *pa)
{
struct pciide_channel *cp;
pcireg_t interface, idecr;
int channel;
if (pciide_chipen(sc, pa) == 0)
return;
aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev,
"bus-master DMA support present");
/*
* Check to see if we're part of the Winbond 83c553 Southbridge.
* If so, we need to disable DMA on rev. <= 5 of that chip.
*/
if (pci_find_device(pa, sl82c105_bugchk)) {
aprint_verbose(" but disabled due to 83c553 rev. <= 0x05");
sc->sc_dma_ok = 0;
} else
pciide_mapreg_dma(sc, pa);
aprint_verbose("\n");
sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA32 | ATAC_CAP_DATA16;
sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA;
sc->sc_wdcdev.irqack = pciide_irqack;
sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
}
sc->sc_wdcdev.sc_atac.atac_set_modes = sl82c105_setup_channel;
sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS;
idecr = pci_conf_read(sc->sc_pc, sc->sc_tag, SYMPH_IDECSR);
interface = PCI_INTERFACE(pa->pa_class);
wdc_allocate_regs(&sc->sc_wdcdev);
for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels;
channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
if ((channel == 0 && (idecr & IDECR_P0EN) == 0) ||
(channel == 1 && (idecr & IDECR_P1EN) == 0)) {
aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev,
"%s channel ignored (disabled)\n", cp->name);
cp->ata_channel.ch_flags |= ATACH_DISABLED;
continue;
}
pciide_mapchan(pa, cp, interface, pciide_pci_intr);
}
}
static void
sl82c105_setup_channel(struct ata_channel *chp)
{
struct ata_drive_datas *drvp;
struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
int pxdx_reg, drive, s;
pcireg_t pxdx;
/* Set up DMA if needed. */
pciide_channel_dma_setup(cp);
for (drive = 0; drive < 2; drive++) {
pxdx_reg = ((chp->ch_channel == 0) ? SYMPH_P0D0CR
: SYMPH_P1D0CR) +
(drive * 4);
pxdx = pci_conf_read(sc->sc_pc, sc->sc_tag, pxdx_reg);
pxdx &= ~(PxDx_CMD_ON_MASK|PxDx_CMD_OFF_MASK);
pxdx &= ~(PxDx_PWEN|PxDx_RDYEN|PxDx_RAEN);
drvp = &chp->ch_drive[drive];
/* If no drive, skip. */
if ((drvp->drive_flags & DRIVE) == 0) {
pci_conf_write(sc->sc_pc, sc->sc_tag, pxdx_reg, pxdx);
continue;
}
if (drvp->drive_flags & DRIVE_DMA) {
/*
* Timings will be used for both PIO and DMA,
* so adjust DMA mode if needed.
*/
if (drvp->PIO_mode >= 3) {
if ((drvp->DMA_mode + 2) > drvp->PIO_mode)
drvp->DMA_mode = drvp->PIO_mode - 2;
if (drvp->DMA_mode < 1) {
/*
* Can't mix both PIO and DMA.
* Disable DMA.
*/
s = splbio();
drvp->drive_flags &= ~DRIVE_DMA;
splx(s);
}
} else {
/*
* Can't mix both PIO and DMA. Disable
* DMA.
*/
s = splbio();
drvp->drive_flags &= ~DRIVE_DMA;
splx(s);
}
}
if (drvp->drive_flags & DRIVE_DMA) {
/* Use multi-word DMA. */
pxdx |= symph_mw_dma_times[drvp->DMA_mode].cmd_on <<
PxDx_CMD_ON_SHIFT;
pxdx |= symph_mw_dma_times[drvp->DMA_mode].cmd_off;
} else {
pxdx |= symph_pio_times[drvp->PIO_mode].cmd_on <<
PxDx_CMD_ON_SHIFT;
pxdx |= symph_pio_times[drvp->PIO_mode].cmd_off;
}
/* XXX PxDx_PWEN? PxDx_RDYEN? PxDx_RAEN? */
/* ...and set the mode for this drive. */
pci_conf_write(sc->sc_pc, sc->sc_tag, pxdx_reg, pxdx);
}
}