NetBSD/sys/dev/pci/if_dgereg.h

332 lines
9.5 KiB
C

/* $NetBSD: if_dgereg.h,v 1.3 2007/12/25 18:33:40 perry Exp $ */
/*
* Copyright (c) 2004, SUNET, Swedish University Computer Network.
* All rights reserved.
*
* Written by Anders Magnusson for SUNET, Swedish University Computer Network.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed for the NetBSD Project by
* SUNET, Swedish University Computer Network.
* 4. The name of SUNET may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY SUNET ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/* PCI registers */
#define DGE_PCI_BAR 0x10
#define DGE_PCIX_CMD 0xe4
/* PCIX CMD bits */
#define PCIX_MMRBC_MSK 0x000c0000
#define PCIX_MMRBC_512 0x00000000
#define PCIX_MMRBC_1024 0x00040000
#define PCIX_MMRBC_2048 0x00080000
#define PCIX_MMRBC_4096 0x000c0000
/* General registers */
#define DGE_CTRL0 0x000
#define DGE_CTRL1 0x008
#define DGE_STATUS 0x010
#define DGE_EECD 0x018
#define DGE_MFS 0x020
/* Interrupt control registers */
#define DGE_ICR 0x080
#define DGE_ICS 0x088
#define DGE_IMS 0x090
#define DGE_IMC 0x098
/* Receiver control registers */
#define DGE_RCTL 0x0100
#define DGE_FCRTL 0x0108
#define DGE_FCRTH 0x0110
#define DGE_RDBAL 0x0118
#define DGE_RDBAH 0x011c
#define DGE_RDLEN 0x0120
#define DGE_RDH 0x0128
#define DGE_RDT 0x0130
#define DGE_RDTR 0x0138
#define DGE_RXDCTL 0x0140
#define DGE_RAIDC 0x0148
#define DGE_RXCSUM 0x0158
#define DGE_RAL 0x0180
#define DGE_RAH 0x0184
#define DGE_MTA 0x0200
/* Transmit control registers */
#define DGE_TCTL 0x0600
#define DGE_TDBAL 0x0608
#define DGE_TDBAH 0x060c
#define DGE_TDLEN 0x0610
#define DGE_TDH 0x0618
#define DGE_TDT 0x0620
#define DGE_TIDV 0x0628
#define DGE_TXDCTL 0x0630
#define DGE_TSPMT 0x0638
#define DGE_PAP 0x0640
/* PHY communications */
#define DGE_MDIO 0x0758
#define DGE_MDIRW 0x0760
/* Statistics */
#define DGE_TPRL 0x2000
#define DGE_TPRH 0x2004
/*
* CTRL0 bit definitions.
*/
#define CTRL0_LRST 0x00000008
#define CTRL0_JFE 0x00000010
#define CTRL0_XLE 0x00000020
#define CTRL0_MDCS 0x00000040
#define CTRL0_CMDC 0x00000080
#define CTRL0_SDP0 0x00040000
#define CTRL0_SDP1 0x00080000
#define CTRL0_SDP2 0x00100000
#define CTRL0_SDP3 0x00200000
#define CTRL0_SDP0_DIR 0x00400000
#define CTRL0_SDP1_DIR 0x00800000
#define CTRL0_SDP2_DIR 0x01000000
#define CTRL0_SDP3_DIR 0x02000000
#define CTRL0_RST 0x04000000
#define CTRL0_RPE 0x08000000
#define CTRL0_TPE 0x10000000
#define CTRL0_VME 0x40000000
/*
* CTRL1 bit definitions.
*/
#define CTRL1_EE_RST 0x00002000
/*
* STATUS bit definitions.
*/
#define STATUS_LINKUP 0x00000002
#define STATUS_BUS64 0x00001000
#define STATUS_PCIX 0x00002000
#define STATUS_PCIX_MSK 0x0000C000
#define STATUS_PCIX_66 0x00000000
#define STATUS_PCIX_100 0x00004000
#define STATUS_PCIX_133 0x00008000
/*
* Interrupt control registers bit definitions.
*/
#define ICR_TXDW 0x00000001
#define ICR_TXQE 0x00000002
#define ICR_LSC 0x00000004
#define ICR_RXSEQ 0x00000008
#define ICR_RXDMT0 0x00000010
#define ICR_RXO 0x00000040
#define ICR_RXT0 0x00000080
#define ICR_GPI0 0x00000800
#define ICR_GPI1 0x00001000
#define ICR_GPI2 0x00002000
#define ICR_GPI3 0x00004000
/*
* RCTL bit definitions.
*/
#define RCTL_RXEN 0x00000002
#define RCTL_SBP 0x00000004
#define RCTL_UPE 0x00000008
#define RCTL_MPE 0x00000010
#define RCTL_RDMTS_12 0x00000000
#define RCTL_RDMTS_14 0x00000100
#define RCTL_RDMTS_18 0x00000200
#define RCTL_BAM 0x00008000
#define RCTL_BSIZE_2k 0x00000000
#define RCTL_BSIZE_4k 0x00010000
#define RCTL_BSIZE_8k 0x00020000
#define RCTL_BSIZE_16k 0x00030000
#define RCTL_VFE 0x00040000
#define RCTL_CFIEN 0x00080000
#define RCTL_CFI 0x00100000
#define RCTL_RPDA_MC 0x00400000
#define RCTL_CFF 0x00800000
#define RCTL_SECRC 0x04000000
#define RCTL_MO(x) ((x) << 12)
#define FCRTL_XONE 0x80000000
/*
* RXDCTL macros.
*/
#define RXDCTL_PTHRESH(x) (x)
#define RXDCTL_HTHRESH(x) ((x) << 9)
#define RXDCTL_WTHRESH(x) ((x) << 18)
/*
* RXCSUM bit definitions.
*/
#define RXCSUM_IPOFL 0x00000100
#define RXCSUM_TUOFL 0x00000200
/*
* RAH/RAL macros.
*/
#define RAH_AV 0x80000000
#define RA_TABSIZE 16 /* # of direct-filtered addresses */
#define RA_ADDR(reg, idx) ((reg) + (idx) * 8)
/*
* MTA macros.
*/
#define MC_TABSIZE 128 /* Size of multicast array table */
/*
* TCTL bit definitions.
*/
#define TCTL_TCE 0x00000001
#define TCTL_TXEN 0x00000002
#define TCTL_TPDE 0x00000004
/*
* TXDCTL macros.
*/
#define TXDCTL_PTHRESH(x) (x)
#define TXDCTL_HTHRESH(x) ((x) << 8)
#define TXDCTL_WTHRESH(x) ((x) << 16)
/*
* MDIO communication bits.
* This is for "New Protocol".
*/
#define MDIO_REG(x) ((x) & 0xffff)
#define MDIO_DEV(x) ((x) << 16)
#define MDIO_PHY(x) ((x) << 21)
#define MDIO_ADDR 0
#define MDIO_WRITE (1 << 26)
#define MDIO_READ (1 << 27)
#define MDIO_OLD_P (1 << 28)
#define MDIO_CMD (1 << 30)
/*
* EEPROM stuff.
* The 10GbE card uses an ATMEL AT93C46 in 64x16 mode,
* see http://www.atmel.com/dyn/resources/prod_documents/doc0172.pdf
*/
/* EEPROM bit masks in the EECD register */
#define EECD_SK 0x01
#define EECD_CS 0x02
#define EECD_DI 0x04
#define EECD_DO 0x08
#define EEPROM_SIZE 64 /* 64 word in length */
#define EEPROM_CKSUM 0xbaba
#define EE_ADDR01 0 /* Offset in EEPROM for MAC address 0-1 */
#define EE_ADDR23 1 /* Offset in EEPROM for MAC address 2-3 */
#define EE_ADDR45 2 /* Offset in EEPROM for MAC address 4-5 */
/*
* Transmit descriptor definitions.
*/
struct dge_tdes {
uint32_t dt_baddrl; /* Lower 32 bits of buffer address */
uint32_t dt_baddrh; /* Upper 32 bits of buffer address */
uint32_t dt_ctl; /* Command/Type/Length */
uint8_t dt_status; /* Transmitted data status info */
uint8_t dt_popts; /* Packet options */
uint16_t dt_vlan; /* VLAN information */
} __packed;
/*
* Context transmit descriptor, "overlayed" on the above struct.
*/
struct dge_ctdes {
#if 0
uint8_t dc_ipcss; /* IP checksum start */
uint8_t dc_ipcso; /* IP checksum offset */
uint16_t dc_ipcse; /* IP checksum ending */
uint8_t dc_tucss; /* TCP/UDP checksum start */
uint8_t dc_tucso; /* TCP/UDP checksum offset */
uint16_t dc_tucse; /* TCP/UDP checksum ending */
uint32_t dc_ctl; /* Command/Type/Length (as above) */
uint8_t dc_status; /* Status info (as above) */
uint8_t dc_hdrlen; /* Header length */
uint16_t dc_mss; /* Maximum segment size */
#else
uint32_t dc_tcpip_ipcs; /* IP checksum context */
uint32_t dc_tcpip_tucs; /* TCP/UDP checksum context */
uint32_t dc_tcpip_cmdlen;
uint32_t dc_tcpip_seg; /* TCP segmentation context */
#endif
} __packed;
#define TDESC_DTYP_CTD 0x00000000
#define TDESC_DTYP_DATA 0x00100000
#define TDESC_DCMD_IDE 0x80000000
#define TDESC_DCMD_VLE 0x40000000
#define TDESC_DCMD_RS 0x08000000
#define TDESC_DCMD_TSE 0x04000000
#define TDESC_DCMD_EOP 0x01000000
#define TDESC_TUCMD_IDE 0x80000000
#define TDESC_TUCMD_RS 0x08000000
#define TDESC_TUCMD_TSE 0x04000000
#define TDESC_TUCMD_IP 0x02000000
#define TDESC_TUCMD_TCP 0x01000000
#define DGE_TCPIP_IPCSS(x) (x)
#define DGE_TCPIP_IPCSO(x) ((x) << 8)
#define DGE_TCPIP_IPCSE(x) ((x) << 16)
#define DGE_TCPIP_TUCSS(x) (x)
#define DGE_TCPIP_TUCSO(x) ((x) << 8)
#define DGE_TCPIP_TUCSE(x) ((x) << 16)
#define TDESC_STA_DD 0x01
#define TDESC_POPTS_TXSM 0x02
#define TDESC_POPTS_IXSM 0x01
/*
* Receive descriptor definitions.
*/
struct dge_rdes {
uint32_t dr_baddrl; /* Lower 32 bits of buffer address */
uint32_t dr_baddrh; /* Upper 32 bits of buffer address */
uint16_t dr_len; /* Length of receive packet */
uint16_t dr_cksum; /* Packet checksum */
uint8_t dr_status; /* Received data status info */
uint8_t dr_errors; /* Receive errors */
uint16_t dr_special; /* VLAN (802.1q) information */
} __packed;
#define RDESC_STS_PIF 0x80 /* Exact filter match */
#define RDESC_STS_IPCS 0x40 /* IP Checksum calculated */
#define RDESC_STS_TCPCS 0x20 /* TCP checksum calculated */
#define RDESC_STS_VP 0x08 /* Packet is 802.1q */
#define RDESC_STS_IXSM 0x04 /* Ignore checksum */
#define RDESC_STS_EOP 0x02 /* End of packet */
#define RDESC_STS_DD 0x01 /* Descriptor done */
#define RDESC_ERR_RXE 0x80 /* RX data error */
#define RDESC_ERR_IPE 0x40 /* IP checksum error */
#define RDESC_ERR_TCPE 0x20 /* TCP/UDP checksum error */
#define RDESC_ERR_P 0x08 /* Parity error */
#define RDESC_ERR_SE 0x02 /* Symbol error */
#define RDESC_ERR_CE 0x01 /* CRC/Alignment error */