232 lines
8.4 KiB
Plaintext
232 lines
8.4 KiB
Plaintext
# $NetBSD: GENERIC,v 1.42 2003/01/18 12:28:59 tsutsui Exp $
|
|
#
|
|
# GENERIC machine description file
|
|
#
|
|
# This machine description file is used to generate the default NetBSD
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
# and device drivers, but should be useful for most applications.
|
|
#
|
|
# The machine description file can be customised for your specific
|
|
# machine to reduce the kernel size and improve its performance.
|
|
#
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
# man page.
|
|
#
|
|
# For further information on hardware support for this architecture, see
|
|
# the intro(4) man page. For further information about kernel options
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
# of each device driver in this file see the section 4 man page for the
|
|
# device.
|
|
|
|
include "arch/news68k/conf/std.news68k"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-$Revision: 1.42 $"
|
|
|
|
maxusers 8
|
|
|
|
options news1200 # news1200 support
|
|
options news1700 # news1[4567]00 support
|
|
options CPU_SINGLE # Will IOP be supported eventually?
|
|
#options FPU_EMULATE
|
|
|
|
# Standard system options
|
|
options NTP # NTP phase/frequency locked loop
|
|
options KTRACE # system call tracing support
|
|
options SYSTRACE # system call vetting via systrace(1)
|
|
options SYSVMSG # System V message queues
|
|
options SYSVSEM # System V semaphores
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
options SYSVSHM # System V shared memory
|
|
#options SHMMAXPGS=1024 # 1024 pages is the default
|
|
options LKM # loadable kernel modules
|
|
#options UCONSOLE # users can redirect console (unsafe)
|
|
options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
|
|
# Enable experimental buffer queue strategy for better responsiveness under
|
|
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
|
|
#options NEW_BUFQ_STRATEGY
|
|
|
|
# Debugging options
|
|
options DIAGNOSTIC # extra kernel sanity checking
|
|
#options DEBUG # extra kernel debugging support
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
|
options DDB # kernel dynamic debugger
|
|
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
|
#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
|
|
options SCSIVERBOSE # Verbose SCSI errors
|
|
#options SCSIDEBUG # extra SCSI debugging support
|
|
#makeoptions DEBUG="-g" # compile full symbol table
|
|
|
|
# Compatibility options
|
|
options COMPAT_43 # compatibility with 4.3BSD binaries
|
|
options COMPAT_12 # NetBSD 1.2 binary compatibility
|
|
options COMPAT_13 # NetBSD 1.3 binary compatibility
|
|
options COMPAT_14 # NetBSD 1.4 binary compatibility
|
|
options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out
|
|
|
|
#options COMPAT_SVR4 # binary compatibility with SVR4
|
|
options COMPAT_SUNOS # binary compatibility with SunOS
|
|
#options COMPAT_LINUX # binary compatibllity with Linux/m68k
|
|
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
|
|
# Filesystem options
|
|
file-system FFS # Berkeley Fast Filesystem
|
|
file-system LFS # log-structured file system
|
|
file-system NFS # Sun NFS-compatible filesystem client
|
|
file-system MFS # memory-based filesystem
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS FAT file system
|
|
file-system KERNFS # /kern
|
|
file-system PROCFS # /proc
|
|
file-system FDESC # /dev/fd/*
|
|
file-system NULLFS # loopback file system
|
|
file-system OVERLAY # overlay file system
|
|
file-system PORTAL # portal filesystem (still experimental)
|
|
file-system UMAPFS # NULLFS + uid and gid remapping
|
|
file-system UNION # union file system
|
|
#file-system CODA # Coda File System; also needs vcode (below)
|
|
|
|
options NFSSERVER # nfs server support
|
|
options QUOTA # ffs quotas
|
|
#options FFS_EI # ffs endian independant support
|
|
options SOFTDEP # ffs soft updates support
|
|
|
|
# Networking options
|
|
options INET # Internet protocols
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options GATEWAY # IP packet forwarding
|
|
#options MROUTING # IP multicast routing
|
|
#options NS # XNS
|
|
#options NSIP # XNS tunneling over IP
|
|
#options ISO,TPIP # OSI
|
|
#options EON # OSI tunneling over IP
|
|
#options CCITT,LLC,HDLC # X.25
|
|
#options NETATALK # AppleTalk networking protocols
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
options NFS_BOOT_BOOTPARAM
|
|
options NFS_BOOT_DHCP
|
|
|
|
config netbsd root on ? type ?
|
|
#config netbsd root on ? type nfs
|
|
|
|
#
|
|
# device declarations
|
|
#
|
|
|
|
mainbus0 at root
|
|
|
|
# NEWS HYPER-BUS
|
|
hb0 at mainbus0 systype NEWS1700
|
|
hb1 at mainbus0 systype NEWS1200
|
|
|
|
# interval timer
|
|
timer0 at hb0 addr 0xe1000000 ipl 6 # news1700
|
|
timer0 at hb1 addr 0xe1140000 ipl 6 # news1200
|
|
|
|
# MK48T02 TOD clock
|
|
mkclock0 at hb0 addr 0xe0d80000 # news1700
|
|
mkclock0 at hb1 addr 0xe1420000 # news1200
|
|
|
|
# onboard LANCE ethernet
|
|
le0 at hb0 addr 0xe0f00000 ipl 4 # news1700
|
|
le0 at hb1 addr 0xe1a40000 ipl 4 # news1200
|
|
|
|
# keyboard/mouse
|
|
kbc0 at hb0 addr 0xe0d00000 ipl 5 # news1700
|
|
kb0 at kbc0 # news1700
|
|
ms0 at kbc0 # news1700
|
|
|
|
kb0 at hb1 addr 0xe1240000 ipl 5 # news1200
|
|
ms0 at hb1 addr 0xe1280000 ipl 5 # news1200
|
|
|
|
wskbd* at kb?
|
|
wsmouse* at ms?
|
|
|
|
# onboard z8530 SCC
|
|
zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700
|
|
zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200
|
|
zstty0 at zsc0 channel 0
|
|
zstty1 at zsc0 channel 1
|
|
|
|
# Frame buffer devices; not yet
|
|
#fb0 at hb0 addr 0xf0700000 # NWB225
|
|
#fb1 at hb0 addr 0xf0f00000 # NWB512
|
|
|
|
# onboard uPD72067 FDC; not yet
|
|
#fdc0 at hb0 addr 0xe0c80000 ipl 3
|
|
#fd* at fdc0
|
|
|
|
# onboard CXD1180 SCSI controller
|
|
#
|
|
# This driver has several flags which may be enabled using
|
|
# the "flags" directive. Valid flags are:
|
|
#
|
|
# 0x000ff Set (1<<target) to disable disconnect/reselect
|
|
# 0x0ff00 Set (1<<(target+8)) to disable parity checking
|
|
# 0x10000 Set this bit to disable DMA interrupts (poll)
|
|
# 0x20000 Set this bit to disable DMA entirely (use PIO)
|
|
#
|
|
# For example: "flags 0x1000f" would disable DMA interrupts,
|
|
# and disable disconnect/reselect for targets 0-3
|
|
#
|
|
si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf
|
|
scsibus* at si0
|
|
|
|
sd* at scsibus? target ? lun ? # SCSI disks
|
|
st* at scsibus? target ? lun ? # SCSI tapes
|
|
cd* at scsibus? target ? lun ? # SCSI CD-ROMs
|
|
ch* at scsibus? target ? lun ? # SCSI changer devices
|
|
ss* at scsibus? target ? lun ? # SCSI scanners
|
|
uk* at scsibus? target ? lun ? # unknown SCSI devices
|
|
|
|
# Misc.
|
|
pseudo-device loop # loopback interface; required
|
|
pseudo-device pty # pseudo-terminals
|
|
pseudo-device md 1 # memory disk device
|
|
pseudo-device vnd 4 # disk-like interface to files
|
|
pseudo-device ccd 4 # concatenated and striped disks
|
|
#pseudo-device cgd 4 # cryptographic disk devices
|
|
pseudo-device raid 8 # RAIDframe disk driver
|
|
#options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
# Options to enable various other RAIDframe RAID types.
|
|
# options RF_INCLUDE_EVENODD=1
|
|
# options RF_INCLUDE_RAID5_RS=1
|
|
# options RF_INCLUDE_PARITYLOGGING=1
|
|
# options RF_INCLUDE_CHAINDECLUSTER=1
|
|
# options RF_INCLUDE_INTERDECLUSTER=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
pseudo-device sl 2 # SLIP interfaces
|
|
pseudo-device ppp 2 # PPP interfaces
|
|
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
pseudo-device tun 4 # Network "tunnel" device
|
|
pseudo-device gre 2 # generic L3 over IP tunnel
|
|
pseudo-device bpfilter 16 # Berkeley Packet Filter
|
|
pseudo-device ipfilter # ip filter
|
|
pseudo-device strip 1 # Starmode Radio IP (Metricom)
|
|
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
pseudo-device bridge # simple inter-network bridging
|
|
pseudo-device rnd # /dev/random and in-kernle generator
|
|
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
|
pseudo-device clockctl # user control of clock subsystem
|