NetBSD/sys/arch/sparc/dev/kd.c

585 lines
12 KiB
C

/* $NetBSD: kd.c,v 1.5 1999/08/05 18:08:13 thorpej Exp $ */
/*-
* Copyright (c) 1996 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Gordon W. Ross.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Keyboard/Display device.
*
* This driver exists simply to provide a tty device that
* the indirect console driver can point to.
* The kbd driver sends its input here.
* Output goes to the screen via PROM printf.
*/
#include <sys/param.h>
#include <sys/proc.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/tty.h>
#include <sys/file.h>
#include <sys/conf.h>
#include <sys/device.h>
#include <machine/bsd_openprom.h>
#include <machine/promlib.h>
#include <machine/eeprom.h>
#include <machine/psl.h>
#include <machine/cpu.h>
#include <machine/kbd.h>
#include <machine/autoconf.h>
#include <machine/conf.h>
#ifdef RASTERCONSOLE
#include <machine/fbio.h>
#include <machine/fbvar.h>
#endif
#include <dev/cons.h>
#include <dev/sun/kbd_xlate.h>
#include <sparc/dev/cons.h>
struct tty *fbconstty = 0; /* tty structure for frame buffer console */
int cnrom __P((void));
void cnrint __P((void));
#define KDMAJOR 1
#define PUT_WSIZE 64
struct kd_softc {
struct device kd_dev; /* required first: base device */
struct tty *kd_tty;
int rows, cols;
};
/*
* There is no point in pretending there might be
* more than one keyboard/display device.
*/
static struct kd_softc kd_softc;
static int kd_is_console;
static int kdparam(struct tty *, struct termios *);
static void kdstart(struct tty *);
int rom_console_input; /* when set, hardclock calls cnrom() */
int cons_ocount; /* output byte count */
/* Now talking directly to the zs, so this is not needed. */
int
cnrom()
{
return (0);
}
void
cnrint()
{
}
/*
* This is called by kbd_attach()
* XXX - Make this a proper child of kbd?
*/
void
kd_init(unit)
int unit;
{
struct kd_softc *kd;
struct tty *tp;
if (unit != 0)
return;
kd = &kd_softc; /* XXX */
tp = ttymalloc();
tp->t_oproc = kdstart;
tp->t_param = kdparam;
tp->t_dev = makedev(KDMAJOR, unit);
#if 1 /* XXX - Why? */
clalloc(&tp->t_rawq, 1024, 1);
clalloc(&tp->t_canq, 1024, 1);
/* output queue doesn't need quoting */
clalloc(&tp->t_outq, 1024, 0);
#endif
tty_attach(tp);
kd->kd_tty = tp;
/*
* get the console struct winsize.
*/
if (kd_is_console) {
fbconstty = tp;
#ifdef RASTERCONSOLE
kd->rows = fbrcons_rows();
kd->cols = fbrcons_cols();
#endif
}
if (CPU_ISSUN4COR4M) {
int i;
char *prop;
if (kd->rows == 0 &&
(prop = getpropstring(optionsnode, "screen-#rows"))) {
i = 0;
while (*prop != '\0')
i = i * 10 + *prop++ - '0';
kd->rows = (unsigned short)i;
}
if (kd->cols == 0 &&
(prop = getpropstring(optionsnode, "screen-#columns"))) {
i = 0;
while (*prop != '\0')
i = i * 10 + *prop++ - '0';
kd->cols = (unsigned short)i;
}
}
if (CPU_ISSUN4) {
struct eeprom *ep = (struct eeprom *)eeprom_va;
if (ep) {
if (kd->rows == 0)
kd->rows = (u_short)ep->eeTtyRows;
if (kd->cols == 0)
kd->cols = (u_short)ep->eeTtyCols;
}
}
return;
}
struct tty *
kdtty(dev)
dev_t dev;
{
struct kd_softc *kd;
kd = &kd_softc; /* XXX */
return (kd->kd_tty);
}
int
kdopen(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
struct kd_softc *kd;
int error, s, unit;
struct tty *tp;
unit = minor(dev);
if (unit != 0)
return ENXIO;
kd = &kd_softc; /* XXX */
tp = kd->kd_tty;
if ((error = kbd_iopen(unit)) != 0) {
#ifdef DIAGNOSTIC
printf("kd: kbd_iopen, error=%d\n", error);
#endif
return (error);
}
/* It's simpler to do this up here. */
if (((tp->t_state & (TS_ISOPEN | TS_XCLUDE))
== (TS_ISOPEN | TS_XCLUDE))
&& (p->p_ucred->cr_uid != 0) )
{
return (EBUSY);
}
s = spltty();
if ((tp->t_state & TS_ISOPEN) == 0) {
/* First open. */
ttychars(tp);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_cflag = TTYDEF_CFLAG;
tp->t_lflag = TTYDEF_LFLAG;
tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED;
(void) kdparam(tp, &tp->t_termios);
ttsetwater(tp);
tp->t_winsize.ws_row = kd->rows;
tp->t_winsize.ws_col = kd->cols;
/* Flush pending input? Clear translator? */
/* This (pseudo)device always has SOFTCAR */
tp->t_state |= TS_CARR_ON;
}
splx(s);
return ((*linesw[tp->t_line].l_open)(dev, tp));
}
int
kdclose(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
struct kd_softc *kd;
struct tty *tp;
kd = &kd_softc; /* XXX */
tp = kd->kd_tty;
/* XXX This is for cons.c. */
if ((tp->t_state & TS_ISOPEN) == 0)
return 0;
(*linesw[tp->t_line].l_close)(tp, flag);
ttyclose(tp);
return (0);
}
int
kdread(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
struct kd_softc *kd;
struct tty *tp;
kd = &kd_softc; /* XXX */
tp = kd->kd_tty;
return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
}
int
kdwrite(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
struct kd_softc *kd;
struct tty *tp;
kd = &kd_softc; /* XXX */
tp = kd->kd_tty;
return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
}
int
kdioctl(dev, cmd, data, flag, p)
dev_t dev;
u_long cmd;
caddr_t data;
int flag;
struct proc *p;
{
struct kd_softc *kd;
struct tty *tp;
int error;
kd = &kd_softc; /* XXX */
tp = kd->kd_tty;
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
if (error >= 0)
return error;
error = ttioctl(tp, cmd, data, flag, p);
if (error >= 0)
return error;
/* Handle any ioctl commands specific to kbd/display. */
/* XXX - Send KB* ioctls to kbd module? */
/* XXX - Send FB* ioctls to fb module? */
return ENOTTY;
}
void
kdstop(tp, flag)
struct tty *tp;
int flag;
{
}
static int
kdparam(tp, t)
struct tty *tp;
struct termios *t;
{
/* XXX - These are ignored... */
tp->t_ispeed = t->c_ispeed;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = t->c_cflag;
return 0;
}
static void kd_later(void*);
static void kd_putfb(struct tty *);
static void
kdstart(tp)
struct tty *tp;
{
struct clist *cl;
register int s;
s = spltty();
if (tp->t_state & (TS_BUSY|TS_TTSTOP|TS_TIMEOUT))
goto out;
cl = &tp->t_outq;
if (cl->c_cc) {
if (kd_is_console) {
tp->t_state |= TS_BUSY;
if ((s & PSR_PIL) == 0) {
/* called at level zero - update screen now. */
(void) spllowersoftclock();
kd_putfb(tp);
(void) spltty();
tp->t_state &= ~TS_BUSY;
} else {
/* called at interrupt level - do it later */
timeout(kd_later, (void*)tp, 0);
}
} else {
/*
* This driver uses the PROM for writing the screen,
* and that only works if this is the console device.
* If this is not the console, just flush the output.
* Sorry. (In that case, use xdm instead of getty.)
*/
ndflush(cl, cl->c_cc);
}
}
if (cl->c_cc <= tp->t_lowat) {
if (tp->t_state & TS_ASLEEP) {
tp->t_state &= ~TS_ASLEEP;
wakeup((caddr_t)cl);
}
selwakeup(&tp->t_wsel);
}
out:
splx(s);
}
/*
* Timeout function to do delayed writes to the screen.
* Called at splsoftclock when requested by kdstart.
*/
static void
kd_later(tpaddr)
void *tpaddr;
{
struct tty *tp = tpaddr;
register int s;
kd_putfb(tp);
s = spltty();
tp->t_state &= ~TS_BUSY;
(*linesw[tp->t_line].l_start)(tp);
splx(s);
}
/*
* Put text on the screen using the PROM monitor.
* This can take a while, so to avoid missing
* interrupts, this is called at splsoftclock.
*/
static void
kd_putfb(tp)
struct tty *tp;
{
char buf[PUT_WSIZE];
struct clist *cl = &tp->t_outq;
char *p, *end;
int len;
while ((len = q_to_b(cl, buf, PUT_WSIZE-1)) > 0) {
/* PROM will barf if high bits are set. */
p = buf;
end = buf + len;
while (p < end)
*p++ &= 0x7f;
/* Now let the PROM print it. */
prom_putstr(buf, len);
}
}
/*
* Our "interrupt" routine for input. This is called by
* the keyboard driver (dev/sun/kbd.c) at spltty.
*/
void
kd_input(c)
int c;
{
struct kd_softc *kd = &kd_softc;
struct tty *tp;
/* XXX: Make sure the device is open. */
tp = kd->kd_tty;
if (tp == NULL)
return;
if ((tp->t_state & TS_ISOPEN) == 0)
return;
(*linesw[tp->t_line].l_rint)(c, tp);
}
/****************************************************************
* kd console support
****************************************************************/
/* The debugger gets its own key translation state. */
static struct kbd_state kdcn_state;
static void kdcnprobe __P((struct consdev *));
static void kdcninit __P((struct consdev *));
static int kdcngetc __P((dev_t));
static void kdcnputc __P((dev_t, int));
static void kdcnpollc __P((dev_t, int));
struct consdev consdev_kd = {
kdcnprobe,
kdcninit,
kdcngetc,
kdcnputc,
kdcnpollc,
};
/* We never call this. */
static void
kdcnprobe(cn)
struct consdev *cn;
{
}
static void
kdcninit(cn)
struct consdev *cn;
{
struct kbd_state *ks = &kdcn_state;
cn->cn_dev = makedev(KDMAJOR, 0);
cn->cn_pri = CN_INTERNAL;
/* This prepares kbd_translate() */
ks->kbd_id = KBD_MIN_TYPE;
kbd_xlate_init(ks);
/* Indicate that it is OK to use the PROM fbwrite */
kd_is_console = 1;
}
static int
kdcngetc(dev)
dev_t dev;
{
struct kbd_state *ks = &kdcn_state;
int code, class, data, keysym;
for (;;) {
code = zs_getc(zs_conschan);
keysym = kbd_code_to_keysym(ks, code);
class = KEYSYM_CLASS(keysym);
switch (class) {
case KEYSYM_ASCII:
goto out;
case KEYSYM_CLRMOD:
case KEYSYM_SETMOD:
data = (keysym & 0x1F);
/* Only allow ctrl or shift. */
if (data > KBMOD_SHIFT_R)
break;
data = 1 << data;
if (class == KEYSYM_SETMOD)
ks->kbd_modbits |= data;
else
ks->kbd_modbits &= ~data;
break;
case KEYSYM_ALL_UP:
/* No toggle keys here. */
ks->kbd_modbits = 0;
break;
default: /* ignore all other keysyms */
break;
}
}
out:
return (keysym);
}
static void
kdcnputc(dev, c)
dev_t dev;
int c;
{
prom_putchar(c);
}
static void
kdcnpollc(dev, on)
dev_t dev;
int on;
{
struct kbd_state *ks = &kdcn_state;
if (on) {
/* Entering debugger. */
#if NFB > 0
fb_unblank();
#endif
/* Clear shift keys too. */
ks->kbd_modbits = 0;
} else {
/* Resuming kernel. */
}
}