NetBSD/sys/dev/ic/z8530sc.h
pk 3f1373d9b7 Define separate flags for console input and output.
Allow console operations to be passed in attachment arguments.
2000-03-19 12:39:47 +00:00

156 lines
5.9 KiB
C

/* $NetBSD: z8530sc.h,v 1.14 2000/03/19 12:39:47 pk Exp $ */
/*
* Copyright (c) 1994 Gordon W. Ross
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This software was developed by the Computer Systems Engineering group
* at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
* contributed to Berkeley.
*
* All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)zsvar.h 8.1 (Berkeley) 6/11/93
*/
/*
* Function vector - per channel
*/
struct zs_chanstate;
struct zsops {
void (*zsop_rxint) __P((struct zs_chanstate *));
/* receive char available */
void (*zsop_stint) __P((struct zs_chanstate *, int));
/* external/status */
void (*zsop_txint) __P((struct zs_chanstate *));
/* xmit buffer empty */
void (*zsop_softint) __P((struct zs_chanstate *));
/* process software interrupt */
};
extern struct zsops zsops_null;
/*
* Software state, per zs channel.
*/
struct zs_chanstate {
/* Pointers to the device registers. */
volatile u_char *cs_reg_csr; /* ctrl, status, and reg. number. */
volatile u_char *cs_reg_data; /* data or numbered register */
int cs_channel; /* sub-unit number */
void *cs_private; /* sub-driver data pointer */
struct zsops *cs_ops;
int cs_brg_clk; /* BAUD Rate Generator clock
* (usually PCLK / 16) */
int cs_defspeed; /* default baud rate */
int cs_defcflag; /* default cflag */
/*
* We must keep a copy of the write registers as they are
* mostly write-only and we sometimes need to set and clear
* individual bits (e.g., in WR3). Not all of these are
* needed but 16 bytes is cheap and this makes the addressing
* simpler. Unfortunately, we can only write to some registers
* when the chip is not actually transmitting, so whenever
* we are expecting a `transmit done' interrupt the preg array
* is allowed to `get ahead' of the current values. In a
* few places we must change the current value of a register,
* rather than (or in addition to) the pending value; for these
* cs_creg[] contains the current value.
*/
u_char cs_creg[16]; /* current values */
u_char cs_preg[16]; /* pending values */
int cs_heldchange; /* change pending (creg != preg) */
u_char cs_rr0; /* last rr0 processed */
u_char cs_rr0_delta; /* rr0 changes at status intr. */
u_char cs_rr0_mask; /* rr0 bits that stop output */
u_char cs_rr0_dcd; /* which bit to read as DCD */
u_char cs_rr0_cts; /* which bit to read as CTS */
u_char cs_rr0_pps; /* which bit to use for PPS */
/* the above is set only while CRTSCTS is enabled. */
u_char cs_wr5_dtr; /* which bit to write as DTR */
u_char cs_wr5_rts; /* which bit to write as RTS */
/* the above is set only while CRTSCTS is enabled. */
char cs_softreq; /* need soft interrupt call */
char cs_spare1; /* (for skippy :) */
/* power management hooks */
int (*enable) __P((struct zs_chanstate *));
void (*disable) __P((struct zs_chanstate *));
int enabled;
/* MD code might define a larger variant of this. */
};
struct consdev;
struct zsc_attach_args {
int channel; /* two serial channels per zsc */
int hwflags; /* see definitions below */
/* `consdev' is only valid if ZS_HWFLAG_USE_CONSDEV is set */
struct consdev *consdev;
};
/* In case of split console devices, use these: */
#define ZS_HWFLAG_CONSOLE_INPUT 1
#define ZS_HWFLAG_CONSOLE_OUTPUT 2
#define ZS_HWFLAG_CONSOLE \
(ZS_HWFLAG_CONSOLE_INPUT | ZS_HWFLAG_CONSOLE_OUTPUT)
#define ZS_HWFLAG_NO_DCD 4 /* Ignore the DCD bit */
#define ZS_HWFLAG_NO_CTS 8 /* Ignore the CTS bit */
#define ZS_HWFLAG_RAW 16 /* advise raw mode */
#define ZS_HWFLAG_USE_CONSDEV 32 /* Use console ops from `consdev' */
int zsc_intr_soft __P((void *));
int zsc_intr_hard __P((void *));
void zs_abort __P((struct zs_chanstate *));
void zs_break __P((struct zs_chanstate *, int));
void zs_iflush __P((struct zs_chanstate *));
void zs_loadchannelregs __P((struct zs_chanstate *));
int zs_set_speed __P((struct zs_chanstate *, int));
int zs_set_modes __P((struct zs_chanstate *, int));
extern int zs_major;
int zs_check_kgdb __P((struct zs_chanstate *, int));