Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/pci/pciide.c

4588 lines
134 KiB
C
Raw Blame History

/* $NetBSD: pciide.c,v 1.158 2002/06/10 08:41:11 cjs Exp $ */
/*
* Copyright (c) 1999, 2000, 2001 Manuel Bouyer.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Manuel Bouyer.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/*
* Copyright (c) 1996, 1998 Christopher G. Demetriou. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Christopher G. Demetriou
* for the NetBSD Project.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* PCI IDE controller driver.
*
* Author: Christopher G. Demetriou, March 2, 1998 (derived from NetBSD
* sys/dev/pci/ppb.c, revision 1.16).
*
* See "PCI IDE Controller Specification, Revision 1.0 3/4/94" and
* "Programming Interface for Bus Master IDE Controller, Revision 1.0
* 5/16/94" from the PCI SIG.
*
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: pciide.c,v 1.158 2002/06/10 08:41:11 cjs Exp $");
#ifndef WDCDEBUG
#define WDCDEBUG
#endif
#define DEBUG_DMA 0x01
#define DEBUG_XFERS 0x02
#define DEBUG_FUNCS 0x08
#define DEBUG_PROBE 0x10
#ifdef WDCDEBUG
int wdcdebug_pciide_mask = 0;
#define WDCDEBUG_PRINT(args, level) \
if (wdcdebug_pciide_mask & (level)) printf args
#else
#define WDCDEBUG_PRINT(args, level)
#endif
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <uvm/uvm_extern.h>
#include <machine/endian.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/pciidereg.h>
#include <dev/pci/pciidevar.h>
#include <dev/pci/pciide_piix_reg.h>
#include <dev/pci/pciide_amd_reg.h>
#include <dev/pci/pciide_apollo_reg.h>
#include <dev/pci/pciide_cmd_reg.h>
#include <dev/pci/pciide_cy693_reg.h>
#include <dev/pci/pciide_sis_reg.h>
#include <dev/pci/pciide_acer_reg.h>
#include <dev/pci/pciide_pdc202xx_reg.h>
#include <dev/pci/pciide_opti_reg.h>
#include <dev/pci/pciide_hpt_reg.h>
#include <dev/pci/pciide_acard_reg.h>
#include <dev/pci/pciide_sl82c105_reg.h>
#include <dev/pci/cy82c693var.h>
#include "opt_pciide.h"
/* inlines for reading/writing 8-bit PCI registers */
static __inline u_int8_t pciide_pci_read __P((pci_chipset_tag_t, pcitag_t,
int));
static __inline void pciide_pci_write __P((pci_chipset_tag_t, pcitag_t,
int, u_int8_t));
static __inline u_int8_t
pciide_pci_read(pc, pa, reg)
pci_chipset_tag_t pc;
pcitag_t pa;
int reg;
{
return (pci_conf_read(pc, pa, (reg & ~0x03)) >>
((reg & 0x03) * 8) & 0xff);
}
static __inline void
pciide_pci_write(pc, pa, reg, val)
pci_chipset_tag_t pc;
pcitag_t pa;
int reg;
u_int8_t val;
{
pcireg_t pcival;
pcival = pci_conf_read(pc, pa, (reg & ~0x03));
pcival &= ~(0xff << ((reg & 0x03) * 8));
pcival |= (val << ((reg & 0x03) * 8));
pci_conf_write(pc, pa, (reg & ~0x03), pcival);
}
void default_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void piix_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void piix_setup_channel __P((struct channel_softc*));
void piix3_4_setup_channel __P((struct channel_softc*));
static u_int32_t piix_setup_idetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
static u_int32_t piix_setup_idetim_drvs __P((struct ata_drive_datas*));
static u_int32_t piix_setup_sidetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
void amd7x6_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void amd7x6_setup_channel __P((struct channel_softc*));
void apollo_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void apollo_setup_channel __P((struct channel_softc*));
void cmd_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void cmd0643_9_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void cmd0643_9_setup_channel __P((struct channel_softc*));
void cmd_channel_map __P((struct pci_attach_args *,
struct pciide_softc *, int));
int cmd_pci_intr __P((void *));
void cmd646_9_irqack __P((struct channel_softc *));
void cy693_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void cy693_setup_channel __P((struct channel_softc*));
void sis_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void sis_setup_channel __P((struct channel_softc*));
static int sis_hostbr_match __P(( struct pci_attach_args *));
void acer_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void acer_setup_channel __P((struct channel_softc*));
int acer_pci_intr __P((void *));
void pdc202xx_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void pdc202xx_setup_channel __P((struct channel_softc*));
void pdc20268_setup_channel __P((struct channel_softc*));
int pdc202xx_pci_intr __P((void *));
int pdc20265_pci_intr __P((void *));
void opti_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void opti_setup_channel __P((struct channel_softc*));
void hpt_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void hpt_setup_channel __P((struct channel_softc*));
int hpt_pci_intr __P((void *));
void acard_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void acard_setup_channel __P((struct channel_softc*));
int acard_pci_intr __P((void *));
void serverworks_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void serverworks_setup_channel __P((struct channel_softc*));
int serverworks_pci_intr __P((void *));
void sl82c105_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
void sl82c105_setup_channel __P((struct channel_softc*));
void pciide_channel_dma_setup __P((struct pciide_channel *));
int pciide_dma_table_setup __P((struct pciide_softc*, int, int));
int pciide_dma_init __P((void*, int, int, void *, size_t, int));
void pciide_dma_start __P((void*, int, int));
int pciide_dma_finish __P((void*, int, int, int));
void pciide_irqack __P((struct channel_softc *));
void pciide_print_modes __P((struct pciide_channel *));
struct pciide_product_desc {
u_int32_t ide_product;
int ide_flags;
const char *ide_name;
/* map and setup chip, probe drives */
void (*chip_map) __P((struct pciide_softc*, struct pci_attach_args*));
};
/* Flags for ide_flags */
#define IDE_PCI_CLASS_OVERRIDE 0x0001 /* accept even if class != pciide */
#define IDE_16BIT_IOSPACE 0x0002 /* I/O space BARS ignore upper word */
/* Default product description for devices not known from this controller */
const struct pciide_product_desc default_product_desc = {
0,
0,
"Generic PCI IDE controller",
default_chip_map,
};
const struct pciide_product_desc pciide_intel_products[] = {
{ PCI_PRODUCT_INTEL_82092AA,
0,
"Intel 82092AA IDE controller",
default_chip_map,
},
{ PCI_PRODUCT_INTEL_82371FB_IDE,
0,
"Intel 82371FB IDE controller (PIIX)",
piix_chip_map,
},
{ PCI_PRODUCT_INTEL_82371SB_IDE,
0,
"Intel 82371SB IDE Interface (PIIX3)",
piix_chip_map,
},
{ PCI_PRODUCT_INTEL_82371AB_IDE,
0,
"Intel 82371AB IDE controller (PIIX4)",
piix_chip_map,
},
{ PCI_PRODUCT_INTEL_82440MX_IDE,
0,
"Intel 82440MX IDE controller",
piix_chip_map
},
{ PCI_PRODUCT_INTEL_82801AA_IDE,
0,
"Intel 82801AA IDE Controller (ICH)",
piix_chip_map,
},
{ PCI_PRODUCT_INTEL_82801AB_IDE,
0,
"Intel 82801AB IDE Controller (ICH0)",
piix_chip_map,
},
{ PCI_PRODUCT_INTEL_82801BA_IDE,
0,
"Intel 82801BA IDE Controller (ICH2)",
piix_chip_map,
},
{ PCI_PRODUCT_INTEL_82801BAM_IDE,
0,
"Intel 82801BAM IDE Controller (ICH2)",
piix_chip_map,
},
{ PCI_PRODUCT_INTEL_82801CA_IDE_1,
0,
"Intel 82201CA IDE Controller",
piix_chip_map,
},
{ PCI_PRODUCT_INTEL_82801CA_IDE_2,
0,
"Intel 82201CA IDE Controller",
piix_chip_map,
},
{ 0,
0,
NULL,
NULL
}
};
const struct pciide_product_desc pciide_amd_products[] = {
{ PCI_PRODUCT_AMD_PBC756_IDE,
0,
"Advanced Micro Devices AMD756 IDE Controller",
amd7x6_chip_map
},
{ PCI_PRODUCT_AMD_PBC766_IDE,
0,
"Advanced Micro Devices AMD766 IDE Controller",
amd7x6_chip_map
},
{ PCI_PRODUCT_AMD_PBC768_IDE,
0,
"Advanced Micro Devices AMD768 IDE Controller",
amd7x6_chip_map
},
{ PCI_PRODUCT_AMD_PBC8111_IDE,
0,
"Advanced Micro Devices AMD8111 IDE Controller",
amd7x6_chip_map
},
{ 0,
0,
NULL,
NULL
}
};
const struct pciide_product_desc pciide_cmd_products[] = {
{ PCI_PRODUCT_CMDTECH_640,
0,
"CMD Technology PCI0640",
cmd_chip_map
},
{ PCI_PRODUCT_CMDTECH_643,
0,
"CMD Technology PCI0643",
cmd0643_9_chip_map,
},
{ PCI_PRODUCT_CMDTECH_646,
0,
"CMD Technology PCI0646",
cmd0643_9_chip_map,
},
{ PCI_PRODUCT_CMDTECH_648,
IDE_PCI_CLASS_OVERRIDE,
"CMD Technology PCI0648",
cmd0643_9_chip_map,
},
{ PCI_PRODUCT_CMDTECH_649,
IDE_PCI_CLASS_OVERRIDE,
"CMD Technology PCI0649",
cmd0643_9_chip_map,
},
{ 0,
0,
NULL,
NULL
}
};
const struct pciide_product_desc pciide_via_products[] = {
{ PCI_PRODUCT_VIATECH_VT82C586_IDE,
0,
NULL,
apollo_chip_map,
},
{ PCI_PRODUCT_VIATECH_VT82C586A_IDE,
0,
NULL,
apollo_chip_map,
},
{ 0,
0,
NULL,
NULL
}
};
const struct pciide_product_desc pciide_cypress_products[] = {
{ PCI_PRODUCT_CONTAQ_82C693,
IDE_16BIT_IOSPACE,
"Cypress 82C693 IDE Controller",
cy693_chip_map,
},
{ 0,
0,
NULL,
NULL
}
};
const struct pciide_product_desc pciide_sis_products[] = {
{ PCI_PRODUCT_SIS_5597_IDE,
0,
"Silicon Integrated System 5597/5598 IDE controller",
sis_chip_map,
},
{ 0,
0,
NULL,
NULL
}
};
const struct pciide_product_desc pciide_acer_products[] = {
{ PCI_PRODUCT_ALI_M5229,
0,
"Acer Labs M5229 UDMA IDE Controller",
acer_chip_map,
},
{ 0,
0,
NULL,
NULL
}
};
const struct pciide_product_desc pciide_promise_products[] = {
{ PCI_PRODUCT_PROMISE_ULTRA33,
IDE_PCI_CLASS_OVERRIDE,
"Promise Ultra33/ATA Bus Master IDE Accelerator",
pdc202xx_chip_map,
},
{ PCI_PRODUCT_PROMISE_ULTRA66,
IDE_PCI_CLASS_OVERRIDE,
"Promise Ultra66/ATA Bus Master IDE Accelerator",
pdc202xx_chip_map,
},
{ PCI_PRODUCT_PROMISE_ULTRA100,
IDE_PCI_CLASS_OVERRIDE,
"Promise Ultra100/ATA Bus Master IDE Accelerator",
pdc202xx_chip_map,
},
{ PCI_PRODUCT_PROMISE_ULTRA100X,
IDE_PCI_CLASS_OVERRIDE,
"Promise Ultra100/ATA Bus Master IDE Accelerator",
pdc202xx_chip_map,
},
{ PCI_PRODUCT_PROMISE_ULTRA100TX2,
IDE_PCI_CLASS_OVERRIDE,
"Promise Ultra100TX2/ATA Bus Master IDE Accelerator",
pdc202xx_chip_map,
},
{ PCI_PRODUCT_PROMISE_ULTRA100TX2v2,
IDE_PCI_CLASS_OVERRIDE,
"Promise Ultra100TX2v2/ATA Bus Master IDE Accelerator",
pdc202xx_chip_map,
},
{ PCI_PRODUCT_PROMISE_ULTRA133,
IDE_PCI_CLASS_OVERRIDE,
"Promise Ultra133/ATA Bus Master IDE Accelerator",
pdc202xx_chip_map,
},
{ 0,
0,
NULL,
NULL
}
};
const struct pciide_product_desc pciide_opti_products[] = {
{ PCI_PRODUCT_OPTI_82C621,
0,
"OPTi 82c621 PCI IDE controller",
opti_chip_map,
},
{ PCI_PRODUCT_OPTI_82C568,
0,
"OPTi 82c568 (82c621 compatible) PCI IDE controller",
opti_chip_map,
},
{ PCI_PRODUCT_OPTI_82D568,
0,
"OPTi 82d568 (82c621 compatible) PCI IDE controller",
opti_chip_map,
},
{ 0,
0,
NULL,
NULL
}
};
const struct pciide_product_desc pciide_triones_products[] = {
{ PCI_PRODUCT_TRIONES_HPT366,
IDE_PCI_CLASS_OVERRIDE,
NULL,
hpt_chip_map,
},
{ PCI_PRODUCT_TRIONES_HPT374,
IDE_PCI_CLASS_OVERRIDE,
NULL,
hpt_chip_map
},
{ 0,
0,
NULL,
NULL
}
};
const struct pciide_product_desc pciide_acard_products[] = {
{ PCI_PRODUCT_ACARD_ATP850U,
IDE_PCI_CLASS_OVERRIDE,
"Acard ATP850U Ultra33 IDE Controller",
acard_chip_map,
},
{ PCI_PRODUCT_ACARD_ATP860,
IDE_PCI_CLASS_OVERRIDE,
"Acard ATP860 Ultra66 IDE Controller",
acard_chip_map,
},
{ PCI_PRODUCT_ACARD_ATP860A,
IDE_PCI_CLASS_OVERRIDE,
"Acard ATP860-A Ultra66 IDE Controller",
acard_chip_map,
},
{ 0,
0,
NULL,
NULL
}
};
const struct pciide_product_desc pciide_serverworks_products[] = {
{ PCI_PRODUCT_SERVERWORKS_OSB4_IDE,
0,
"ServerWorks OSB4 IDE Controller",
serverworks_chip_map,
},
{ PCI_PRODUCT_SERVERWORKS_CSB5_IDE,
0,
"ServerWorks CSB5 IDE Controller",
serverworks_chip_map,
},
{ 0,
0,
NULL,
}
};
const struct pciide_product_desc pciide_symphony_products[] = {
{ PCI_PRODUCT_SYMPHONY_82C105,
0,
"Symphony Labs 82C105 IDE controller",
sl82c105_chip_map,
},
{ 0,
0,
NULL,
}
};
const struct pciide_product_desc pciide_winbond_products[] = {
{ PCI_PRODUCT_WINBOND_W83C553F_1,
0,
"Winbond W83C553F IDE controller",
sl82c105_chip_map,
},
{ 0,
0,
NULL,
}
};
struct pciide_vendor_desc {
u_int32_t ide_vendor;
const struct pciide_product_desc *ide_products;
};
const struct pciide_vendor_desc pciide_vendors[] = {
{ PCI_VENDOR_INTEL, pciide_intel_products },
{ PCI_VENDOR_CMDTECH, pciide_cmd_products },
{ PCI_VENDOR_VIATECH, pciide_via_products },
{ PCI_VENDOR_CONTAQ, pciide_cypress_products },
{ PCI_VENDOR_SIS, pciide_sis_products },
{ PCI_VENDOR_ALI, pciide_acer_products },
{ PCI_VENDOR_PROMISE, pciide_promise_products },
{ PCI_VENDOR_AMD, pciide_amd_products },
{ PCI_VENDOR_OPTI, pciide_opti_products },
{ PCI_VENDOR_TRIONES, pciide_triones_products },
{ PCI_VENDOR_ACARD, pciide_acard_products },
{ PCI_VENDOR_SERVERWORKS, pciide_serverworks_products },
{ PCI_VENDOR_SYMPHONY, pciide_symphony_products },
{ PCI_VENDOR_WINBOND, pciide_winbond_products },
{ 0, NULL }
};
/* options passed via the 'flags' config keyword */
#define PCIIDE_OPTIONS_DMA 0x01
#define PCIIDE_OPTIONS_NODMA 0x02
int pciide_match __P((struct device *, struct cfdata *, void *));
void pciide_attach __P((struct device *, struct device *, void *));
struct cfattach pciide_ca = {
sizeof(struct pciide_softc), pciide_match, pciide_attach
};
int pciide_chipen __P((struct pciide_softc *, struct pci_attach_args *));
int pciide_mapregs_compat __P(( struct pci_attach_args *,
struct pciide_channel *, int, bus_size_t *, bus_size_t*));
int pciide_mapregs_native __P((struct pci_attach_args *,
struct pciide_channel *, bus_size_t *, bus_size_t *,
int (*pci_intr) __P((void *))));
void pciide_mapreg_dma __P((struct pciide_softc *,
struct pci_attach_args *));
int pciide_chansetup __P((struct pciide_softc *, int, pcireg_t));
void pciide_mapchan __P((struct pci_attach_args *,
struct pciide_channel *, pcireg_t, bus_size_t *, bus_size_t *,
int (*pci_intr) __P((void *))));
int pciide_chan_candisable __P((struct pciide_channel *));
void pciide_map_compat_intr __P(( struct pci_attach_args *,
struct pciide_channel *, int, int));
int pciide_compat_intr __P((void *));
int pciide_pci_intr __P((void *));
const struct pciide_product_desc* pciide_lookup_product __P((u_int32_t));
const struct pciide_product_desc *
pciide_lookup_product(id)
u_int32_t id;
{
const struct pciide_product_desc *pp;
const struct pciide_vendor_desc *vp;
for (vp = pciide_vendors; vp->ide_products != NULL; vp++)
if (PCI_VENDOR(id) == vp->ide_vendor)
break;
if ((pp = vp->ide_products) == NULL)
return NULL;
for (; pp->chip_map != NULL; pp++)
if (PCI_PRODUCT(id) == pp->ide_product)
break;
if (pp->chip_map == NULL)
return NULL;
return pp;
}
int
pciide_match(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct pci_attach_args *pa = aux;
const struct pciide_product_desc *pp;
/*
* Check the ID register to see that it's a PCI IDE controller.
* If it is, we assume that we can deal with it; it _should_
* work in a standardized way...
*/
if (PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE &&
PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
return (1);
}
/*
* Some controllers (e.g. promise Utra-33) don't claim to be PCI IDE
* controllers. Let see if we can deal with it anyway.
*/
pp = pciide_lookup_product(pa->pa_id);
if (pp && (pp->ide_flags & IDE_PCI_CLASS_OVERRIDE)) {
return (1);
}
return (0);
}
void
pciide_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
pcitag_t tag = pa->pa_tag;
struct pciide_softc *sc = (struct pciide_softc *)self;
pcireg_t csr;
char devinfo[256];
const char *displaydev;
sc->sc_pp = pciide_lookup_product(pa->pa_id);
if (sc->sc_pp == NULL) {
sc->sc_pp = &default_product_desc;
pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo);
displaydev = devinfo;
} else
displaydev = sc->sc_pp->ide_name;
/* if displaydev == NULL, printf is done in chip-specific map */
if (displaydev)
printf(": %s (rev. 0x%02x)\n", displaydev,
PCI_REVISION(pa->pa_class));
sc->sc_pc = pa->pa_pc;
sc->sc_tag = pa->pa_tag;
#ifdef WDCDEBUG
if (wdcdebug_pciide_mask & DEBUG_PROBE)
pci_conf_print(sc->sc_pc, sc->sc_tag, NULL);
#endif
sc->sc_pp->chip_map(sc, pa);
if (sc->sc_dma_ok) {
csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
csr |= PCI_COMMAND_MASTER_ENABLE;
pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr);
}
WDCDEBUG_PRINT(("pciide: command/status register=%x\n",
pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG)), DEBUG_PROBE);
}
/* tell wether the chip is enabled or not */
int
pciide_chipen(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
pcireg_t csr;
if ((pa->pa_flags & PCI_FLAGS_IO_ENABLED) == 0) {
csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
PCI_COMMAND_STATUS_REG);
printf("%s: device disabled (at %s)\n",
sc->sc_wdcdev.sc_dev.dv_xname,
(csr & PCI_COMMAND_IO_ENABLE) == 0 ?
"device" : "bridge");
return 0;
}
return 1;
}
int
pciide_mapregs_compat(pa, cp, compatchan, cmdsizep, ctlsizep)
struct pci_attach_args *pa;
struct pciide_channel *cp;
int compatchan;
bus_size_t *cmdsizep, *ctlsizep;
{
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
struct channel_softc *wdc_cp = &cp->wdc_channel;
cp->compat = 1;
*cmdsizep = PCIIDE_COMPAT_CMD_SIZE;
*ctlsizep = PCIIDE_COMPAT_CTL_SIZE;
wdc_cp->cmd_iot = pa->pa_iot;
if (bus_space_map(wdc_cp->cmd_iot, PCIIDE_COMPAT_CMD_BASE(compatchan),
PCIIDE_COMPAT_CMD_SIZE, 0, &wdc_cp->cmd_ioh) != 0) {
printf("%s: couldn't map %s channel cmd regs\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
return (0);
}
wdc_cp->ctl_iot = pa->pa_iot;
if (bus_space_map(wdc_cp->ctl_iot, PCIIDE_COMPAT_CTL_BASE(compatchan),
PCIIDE_COMPAT_CTL_SIZE, 0, &wdc_cp->ctl_ioh) != 0) {
printf("%s: couldn't map %s channel ctl regs\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh,
PCIIDE_COMPAT_CMD_SIZE);
return (0);
}
return (1);
}
int
pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep, pci_intr)
struct pci_attach_args * pa;
struct pciide_channel *cp;
bus_size_t *cmdsizep, *ctlsizep;
int (*pci_intr) __P((void *));
{
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
struct channel_softc *wdc_cp = &cp->wdc_channel;
const char *intrstr;
pci_intr_handle_t intrhandle;
cp->compat = 0;
if (sc->sc_pci_ih == NULL) {
if (pci_intr_map(pa, &intrhandle) != 0) {
printf("%s: couldn't map native-PCI interrupt\n",
sc->sc_wdcdev.sc_dev.dv_xname);
return 0;
}
intrstr = pci_intr_string(pa->pa_pc, intrhandle);
sc->sc_pci_ih = pci_intr_establish(pa->pa_pc,
intrhandle, IPL_BIO, pci_intr, sc);
if (sc->sc_pci_ih != NULL) {
printf("%s: using %s for native-PCI interrupt\n",
sc->sc_wdcdev.sc_dev.dv_xname,
intrstr ? intrstr : "unknown interrupt");
} else {
printf("%s: couldn't establish native-PCI interrupt",
sc->sc_wdcdev.sc_dev.dv_xname);
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
return 0;
}
}
cp->ih = sc->sc_pci_ih;
if (pci_mapreg_map(pa, PCIIDE_REG_CMD_BASE(wdc_cp->channel),
PCI_MAPREG_TYPE_IO, 0,
&wdc_cp->cmd_iot, &wdc_cp->cmd_ioh, NULL, cmdsizep) != 0) {
printf("%s: couldn't map %s channel cmd regs\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
return 0;
}
if (pci_mapreg_map(pa, PCIIDE_REG_CTL_BASE(wdc_cp->channel),
PCI_MAPREG_TYPE_IO, 0,
&wdc_cp->ctl_iot, &cp->ctl_baseioh, NULL, ctlsizep) != 0) {
printf("%s: couldn't map %s channel ctl regs\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, *cmdsizep);
return 0;
}
/*
* In native mode, 4 bytes of I/O space are mapped for the control
* register, the control register is at offset 2. Pass the generic
* code a handle for only one byte at the rigth offset.
*/
if (bus_space_subregion(wdc_cp->ctl_iot, cp->ctl_baseioh, 2, 1,
&wdc_cp->ctl_ioh) != 0) {
printf("%s: unable to subregion %s channel ctl regs\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, *cmdsizep);
bus_space_unmap(wdc_cp->cmd_iot, cp->ctl_baseioh, *ctlsizep);
return 0;
}
return (1);
}
void
pciide_mapreg_dma(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
pcireg_t maptype;
bus_addr_t addr;
/*
* Map DMA registers
*
* Note that sc_dma_ok is the right variable to test to see if
* DMA can be done. If the interface doesn't support DMA,
* sc_dma_ok will never be non-zero. If the DMA regs couldn't
* be mapped, it'll be zero. I.e., sc_dma_ok will only be
* non-zero if the interface supports DMA and the registers
* could be mapped.
*
* XXX Note that despite the fact that the Bus Master IDE specs
* XXX say that "The bus master IDE function uses 16 bytes of IO
* XXX space," some controllers (at least the United
* XXX Microelectronics UM8886BF) place it in memory space.
*/
maptype = pci_mapreg_type(pa->pa_pc, pa->pa_tag,
PCIIDE_REG_BUS_MASTER_DMA);
switch (maptype) {
case PCI_MAPREG_TYPE_IO:
sc->sc_dma_ok = (pci_mapreg_info(pa->pa_pc, pa->pa_tag,
PCIIDE_REG_BUS_MASTER_DMA, PCI_MAPREG_TYPE_IO,
&addr, NULL, NULL) == 0);
if (sc->sc_dma_ok == 0) {
printf(", but unused (couldn't query registers)");
break;
}
if ((sc->sc_pp->ide_flags & IDE_16BIT_IOSPACE)
&& addr >= 0x10000) {
sc->sc_dma_ok = 0;
printf(", but unused (registers at unsafe address "
"%#lx)", (unsigned long)addr);
break;
}
/* FALLTHROUGH */
case PCI_MAPREG_MEM_TYPE_32BIT:
sc->sc_dma_ok = (pci_mapreg_map(pa,
PCIIDE_REG_BUS_MASTER_DMA, maptype, 0,
&sc->sc_dma_iot, &sc->sc_dma_ioh, NULL, NULL) == 0);
sc->sc_dmat = pa->pa_dmat;
if (sc->sc_dma_ok == 0) {
printf(", but unused (couldn't map registers)");
} else {
sc->sc_wdcdev.dma_arg = sc;
sc->sc_wdcdev.dma_init = pciide_dma_init;
sc->sc_wdcdev.dma_start = pciide_dma_start;
sc->sc_wdcdev.dma_finish = pciide_dma_finish;
}
if (sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags &
PCIIDE_OPTIONS_NODMA) {
printf(", but unused (forced off by config file)");
sc->sc_dma_ok = 0;
}
break;
default:
sc->sc_dma_ok = 0;
printf(", but unsupported register maptype (0x%x)", maptype);
}
}
int
pciide_compat_intr(arg)
void *arg;
{
struct pciide_channel *cp = arg;
#ifdef DIAGNOSTIC
/* should only be called for a compat channel */
if (cp->compat == 0)
panic("pciide compat intr called for non-compat chan %p\n", cp);
#endif
return (wdcintr(&cp->wdc_channel));
}
int
pciide_pci_intr(arg)
void *arg;
{
struct pciide_softc *sc = arg;
struct pciide_channel *cp;
struct channel_softc *wdc_cp;
int i, rv, crv;
rv = 0;
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
cp = &sc->pciide_channels[i];
wdc_cp = &cp->wdc_channel;
/* If a compat channel skip. */
if (cp->compat)
continue;
/* if this channel not waiting for intr, skip */
if ((wdc_cp->ch_flags & WDCF_IRQ_WAIT) == 0)
continue;
crv = wdcintr(wdc_cp);
if (crv == 0)
; /* leave rv alone */
else if (crv == 1)
rv = 1; /* claim the intr */
else if (rv == 0) /* crv should be -1 in this case */
rv = crv; /* if we've done no better, take it */
}
return (rv);
}
void
pciide_channel_dma_setup(cp)
struct pciide_channel *cp;
{
int drive;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
struct ata_drive_datas *drvp;
for (drive = 0; drive < 2; drive++) {
drvp = &cp->wdc_channel.ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
/* setup DMA if needed */
if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
(drvp->drive_flags & DRIVE_UDMA) == 0) ||
sc->sc_dma_ok == 0) {
drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
continue;
}
if (pciide_dma_table_setup(sc, cp->wdc_channel.channel, drive)
!= 0) {
/* Abort DMA setup */
drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
continue;
}
}
}
int
pciide_dma_table_setup(sc, channel, drive)
struct pciide_softc *sc;
int channel, drive;
{
bus_dma_segment_t seg;
int error, rseg;
const bus_size_t dma_table_size =
sizeof(struct idedma_table) * NIDEDMA_TABLES;
struct pciide_dma_maps *dma_maps =
&sc->pciide_channels[channel].dma_maps[drive];
/* If table was already allocated, just return */
if (dma_maps->dma_table)
return 0;
/* Allocate memory for the DMA tables and map it */
if ((error = bus_dmamem_alloc(sc->sc_dmat, dma_table_size,
IDEDMA_TBL_ALIGN, IDEDMA_TBL_ALIGN, &seg, 1, &rseg,
BUS_DMA_NOWAIT)) != 0) {
printf("%s:%d: unable to allocate table DMA for "
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
channel, drive, error);
return error;
}
if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
dma_table_size,
(caddr_t *)&dma_maps->dma_table,
BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
printf("%s:%d: unable to map table DMA for"
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
channel, drive, error);
return error;
}
WDCDEBUG_PRINT(("pciide_dma_table_setup: table at %p len %lu, "
"phy 0x%lx\n", dma_maps->dma_table, (u_long)dma_table_size,
(unsigned long)seg.ds_addr), DEBUG_PROBE);
/* Create and load table DMA map for this disk */
if ((error = bus_dmamap_create(sc->sc_dmat, dma_table_size,
1, dma_table_size, IDEDMA_TBL_ALIGN, BUS_DMA_NOWAIT,
&dma_maps->dmamap_table)) != 0) {
printf("%s:%d: unable to create table DMA map for "
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
channel, drive, error);
return error;
}
if ((error = bus_dmamap_load(sc->sc_dmat,
dma_maps->dmamap_table,
dma_maps->dma_table,
dma_table_size, NULL, BUS_DMA_NOWAIT)) != 0) {
printf("%s:%d: unable to load table DMA map for "
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
channel, drive, error);
return error;
}
WDCDEBUG_PRINT(("pciide_dma_table_setup: phy addr of table 0x%lx\n",
(unsigned long)dma_maps->dmamap_table->dm_segs[0].ds_addr),
DEBUG_PROBE);
/* Create a xfer DMA map for this drive */
if ((error = bus_dmamap_create(sc->sc_dmat, IDEDMA_BYTE_COUNT_MAX,
NIDEDMA_TABLES, IDEDMA_BYTE_COUNT_MAX, IDEDMA_BYTE_COUNT_ALIGN,
BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
&dma_maps->dmamap_xfer)) != 0) {
printf("%s:%d: unable to create xfer DMA map for "
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
channel, drive, error);
return error;
}
return 0;
}
int
pciide_dma_init(v, channel, drive, databuf, datalen, flags)
void *v;
int channel, drive;
void *databuf;
size_t datalen;
int flags;
{
struct pciide_softc *sc = v;
int error, seg;
struct pciide_dma_maps *dma_maps =
&sc->pciide_channels[channel].dma_maps[drive];
error = bus_dmamap_load(sc->sc_dmat,
dma_maps->dmamap_xfer,
databuf, datalen, NULL, BUS_DMA_NOWAIT | BUS_DMA_STREAMING |
((flags & WDC_DMA_READ) ? BUS_DMA_READ : BUS_DMA_WRITE));
if (error) {
printf("%s:%d: unable to load xfer DMA map for"
"drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
channel, drive, error);
return error;
}
bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
dma_maps->dmamap_xfer->dm_mapsize,
(flags & WDC_DMA_READ) ?
BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
for (seg = 0; seg < dma_maps->dmamap_xfer->dm_nsegs; seg++) {
#ifdef DIAGNOSTIC
/* A segment must not cross a 64k boundary */
{
u_long phys = dma_maps->dmamap_xfer->dm_segs[seg].ds_addr;
u_long len = dma_maps->dmamap_xfer->dm_segs[seg].ds_len;
if ((phys & ~IDEDMA_BYTE_COUNT_MASK) !=
((phys + len - 1) & ~IDEDMA_BYTE_COUNT_MASK)) {
printf("pciide_dma: segment %d physical addr 0x%lx"
" len 0x%lx not properly aligned\n",
seg, phys, len);
panic("pciide_dma: buf align");
}
}
#endif
dma_maps->dma_table[seg].base_addr =
htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_addr);
dma_maps->dma_table[seg].byte_count =
htole32(dma_maps->dmamap_xfer->dm_segs[seg].ds_len &
IDEDMA_BYTE_COUNT_MASK);
WDCDEBUG_PRINT(("\t seg %d len %d addr 0x%x\n",
seg, le32toh(dma_maps->dma_table[seg].byte_count),
le32toh(dma_maps->dma_table[seg].base_addr)), DEBUG_DMA);
}
dma_maps->dma_table[dma_maps->dmamap_xfer->dm_nsegs -1].byte_count |=
htole32(IDEDMA_BYTE_COUNT_EOT);
bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_table, 0,
dma_maps->dmamap_table->dm_mapsize,
BUS_DMASYNC_PREWRITE);
/* Maps are ready. Start DMA function */
#ifdef DIAGNOSTIC
if (dma_maps->dmamap_table->dm_segs[0].ds_addr & ~IDEDMA_TBL_MASK) {
printf("pciide_dma_init: addr 0x%lx not properly aligned\n",
(u_long)dma_maps->dmamap_table->dm_segs[0].ds_addr);
panic("pciide_dma_init: table align");
}
#endif
/* Clear status bits */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel,
bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel));
/* Write table addr */
bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_TBL + IDEDMA_SCH_OFFSET * channel,
dma_maps->dmamap_table->dm_segs[0].ds_addr);
/* set read/write */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
(flags & WDC_DMA_READ) ? IDEDMA_CMD_WRITE: 0);
/* remember flags */
dma_maps->dma_flags = flags;
return 0;
}
void
pciide_dma_start(v, channel, drive)
void *v;
int channel, drive;
{
struct pciide_softc *sc = v;
WDCDEBUG_PRINT(("pciide_dma_start\n"),DEBUG_XFERS);
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) | IDEDMA_CMD_START);
}
int
pciide_dma_finish(v, channel, drive, force)
void *v;
int channel, drive;
int force;
{
struct pciide_softc *sc = v;
u_int8_t status;
int error = 0;
struct pciide_dma_maps *dma_maps =
&sc->pciide_channels[channel].dma_maps[drive];
status = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel);
WDCDEBUG_PRINT(("pciide_dma_finish: status 0x%x\n", status),
DEBUG_XFERS);
if (force == 0 && (status & IDEDMA_CTL_INTR) == 0)
return WDC_DMAST_NOIRQ;
/* stop DMA channel */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) & ~IDEDMA_CMD_START);
/* Unload the map of the data buffer */
bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
dma_maps->dmamap_xfer->dm_mapsize,
(dma_maps->dma_flags & WDC_DMA_READ) ?
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_xfer);
if ((status & IDEDMA_CTL_ERR) != 0) {
printf("%s:%d:%d: bus-master DMA error: status=0x%x\n",
sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, status);
error |= WDC_DMAST_ERR;
}
if ((status & IDEDMA_CTL_INTR) == 0) {
printf("%s:%d:%d: bus-master DMA error: missing interrupt, "
"status=0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, channel,
drive, status);
error |= WDC_DMAST_NOIRQ;
}
if ((status & IDEDMA_CTL_ACT) != 0) {
/* data underrun, may be a valid condition for ATAPI */
error |= WDC_DMAST_UNDER;
}
return error;
}
void
pciide_irqack(chp)
struct channel_softc *chp;
{
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
/* clear status bits in IDE DMA registers */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * chp->channel,
bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * chp->channel));
}
/* some common code used by several chip_map */
int
pciide_chansetup(sc, channel, interface)
struct pciide_softc *sc;
int channel;
pcireg_t interface;
{
struct pciide_channel *cp = &sc->pciide_channels[channel];
sc->wdc_chanarray[channel] = &cp->wdc_channel;
cp->name = PCIIDE_CHANNEL_NAME(channel);
cp->wdc_channel.channel = channel;
cp->wdc_channel.wdc = &sc->sc_wdcdev;
cp->wdc_channel.ch_queue =
malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
if (cp->wdc_channel.ch_queue == NULL) {
printf("%s %s channel: "
"can't allocate memory for command queue",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
return 0;
}
printf("%s: %s channel %s to %s mode\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
(interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
"configured" : "wired",
(interface & PCIIDE_INTERFACE_PCI(channel)) ?
"native-PCI" : "compatibility");
return 1;
}
/* some common code used by several chip channel_map */
void
pciide_mapchan(pa, cp, interface, cmdsizep, ctlsizep, pci_intr)
struct pci_attach_args *pa;
struct pciide_channel *cp;
pcireg_t interface;
bus_size_t *cmdsizep, *ctlsizep;
int (*pci_intr) __P((void *));
{
struct channel_softc *wdc_cp = &cp->wdc_channel;
if (interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel))
cp->hw_ok = pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep,
pci_intr);
else
cp->hw_ok = pciide_mapregs_compat(pa, cp,
wdc_cp->channel, cmdsizep, ctlsizep);
if (cp->hw_ok == 0)
return;
wdc_cp->data32iot = wdc_cp->cmd_iot;
wdc_cp->data32ioh = wdc_cp->cmd_ioh;
wdcattach(wdc_cp);
}
/*
* Generic code to call to know if a channel can be disabled. Return 1
* if channel can be disabled, 0 if not
*/
int
pciide_chan_candisable(cp)
struct pciide_channel *cp;
{
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
struct channel_softc *wdc_cp = &cp->wdc_channel;
if ((wdc_cp->ch_drive[0].drive_flags & DRIVE) == 0 &&
(wdc_cp->ch_drive[1].drive_flags & DRIVE) == 0) {
printf("%s: disabling %s channel (no drives)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
cp->hw_ok = 0;
return 1;
}
return 0;
}
/*
* generic code to map the compat intr if hw_ok=1 and it is a compat channel.
* Set hw_ok=0 on failure
*/
void
pciide_map_compat_intr(pa, cp, compatchan, interface)
struct pci_attach_args *pa;
struct pciide_channel *cp;
int compatchan, interface;
{
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
struct channel_softc *wdc_cp = &cp->wdc_channel;
if (cp->hw_ok == 0)
return;
if ((interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel)) != 0)
return;
#ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
cp->ih = pciide_machdep_compat_intr_establish(&sc->sc_wdcdev.sc_dev,
pa, compatchan, pciide_compat_intr, cp);
if (cp->ih == NULL) {
#endif
printf("%s: no compatibility interrupt for use by %s "
"channel\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
cp->hw_ok = 0;
#ifdef __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
}
#endif
}
void
pciide_print_modes(cp)
struct pciide_channel *cp;
{
wdc_print_modes(&cp->wdc_channel);
}
void
default_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
pcireg_t interface = PCI_INTERFACE(pa->pa_class);
pcireg_t csr;
int channel, drive;
struct ata_drive_datas *drvp;
u_int8_t idedma_ctl;
bus_size_t cmdsize, ctlsize;
char *failreason;
if (pciide_chipen(sc, pa) == 0)
return;
if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
if (sc->sc_pp == &default_product_desc &&
(sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags &
PCIIDE_OPTIONS_DMA) == 0) {
printf(", but unused (no driver support)");
sc->sc_dma_ok = 0;
} else {
pciide_mapreg_dma(sc, pa);
if (sc->sc_dma_ok != 0)
printf(", used without full driver "
"support");
}
} else {
printf("%s: hardware does not support DMA",
sc->sc_wdcdev.sc_dev.dv_xname);
sc->sc_dma_ok = 0;
}
printf("\n");
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
}
sc->sc_wdcdev.PIO_cap = 0;
sc->sc_wdcdev.DMA_cap = 0;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16;
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
if (interface & PCIIDE_INTERFACE_PCI(channel)) {
cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
&ctlsize, pciide_pci_intr);
} else {
cp->hw_ok = pciide_mapregs_compat(pa, cp,
channel, &cmdsize, &ctlsize);
}
if (cp->hw_ok == 0)
continue;
/*
* Check to see if something appears to be there.
*/
failreason = NULL;
if (!wdcprobe(&cp->wdc_channel)) {
failreason = "not responding; disabled or no drives?";
goto next;
}
/*
* Now, make sure it's actually attributable to this PCI IDE
* channel by trying to access the channel again while the
* PCI IDE controller's I/O space is disabled. (If the
* channel no longer appears to be there, it belongs to
* this controller.) YUCK!
*/
csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
PCI_COMMAND_STATUS_REG);
pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG,
csr & ~PCI_COMMAND_IO_ENABLE);
if (wdcprobe(&cp->wdc_channel))
failreason = "other hardware responding at addresses";
pci_conf_write(sc->sc_pc, sc->sc_tag,
PCI_COMMAND_STATUS_REG, csr);
next:
if (failreason) {
printf("%s: %s channel ignored (%s)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
failreason);
cp->hw_ok = 0;
bus_space_unmap(cp->wdc_channel.cmd_iot,
cp->wdc_channel.cmd_ioh, cmdsize);
if (interface & PCIIDE_INTERFACE_PCI(channel))
bus_space_unmap(cp->wdc_channel.ctl_iot,
cp->ctl_baseioh, ctlsize);
else
bus_space_unmap(cp->wdc_channel.ctl_iot,
cp->wdc_channel.ctl_ioh, ctlsize);
} else {
pciide_map_compat_intr(pa, cp, channel, interface);
}
if (cp->hw_ok) {
cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
wdcattach(&cp->wdc_channel);
}
}
if (sc->sc_dma_ok == 0)
return;
/* Allocate DMA maps */
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
idedma_ctl = 0;
cp = &sc->pciide_channels[channel];
for (drive = 0; drive < 2; drive++) {
drvp = &cp->wdc_channel.ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
if ((drvp->drive_flags & DRIVE_DMA) == 0)
continue;
if (pciide_dma_table_setup(sc, channel, drive) != 0) {
/* Abort DMA setup */
printf("%s:%d:%d: can't allocate DMA maps, "
"using PIO transfers\n",
sc->sc_wdcdev.sc_dev.dv_xname,
channel, drive);
drvp->drive_flags &= ~DRIVE_DMA;
}
printf("%s:%d:%d: using DMA data transfers\n",
sc->sc_wdcdev.sc_dev.dv_xname,
channel, drive);
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
}
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
idedma_ctl);
}
}
}
void
piix_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
int channel;
u_int32_t idetim;
bus_size_t cmdsize, ctlsize;
if (pciide_chipen(sc, pa) == 0)
return;
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
printf("\n");
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
WDC_CAPABILITY_MODE;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
switch(sc->sc_pp->ide_product) {
case PCI_PRODUCT_INTEL_82371AB_IDE:
case PCI_PRODUCT_INTEL_82440MX_IDE:
case PCI_PRODUCT_INTEL_82801AA_IDE:
case PCI_PRODUCT_INTEL_82801AB_IDE:
case PCI_PRODUCT_INTEL_82801BA_IDE:
case PCI_PRODUCT_INTEL_82801BAM_IDE:
case PCI_PRODUCT_INTEL_82801CA_IDE_1:
case PCI_PRODUCT_INTEL_82801CA_IDE_2:
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
}
}
sc->sc_wdcdev.PIO_cap = 4;
sc->sc_wdcdev.DMA_cap = 2;
switch(sc->sc_pp->ide_product) {
case PCI_PRODUCT_INTEL_82801AA_IDE:
sc->sc_wdcdev.UDMA_cap = 4;
break;
case PCI_PRODUCT_INTEL_82801BA_IDE:
case PCI_PRODUCT_INTEL_82801BAM_IDE:
case PCI_PRODUCT_INTEL_82801CA_IDE_1:
case PCI_PRODUCT_INTEL_82801CA_IDE_2:
sc->sc_wdcdev.UDMA_cap = 5;
break;
default:
sc->sc_wdcdev.UDMA_cap = 2;
}
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82371FB_IDE)
sc->sc_wdcdev.set_modes = piix_setup_channel;
else
sc->sc_wdcdev.set_modes = piix3_4_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
WDCDEBUG_PRINT(("piix_setup_chip: old idetim=0x%x",
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
DEBUG_PROBE);
if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
WDCDEBUG_PRINT((", sidetim=0x%x",
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
DEBUG_PROBE);
if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
WDCDEBUG_PRINT((", udamreg 0x%x",
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
DEBUG_PROBE);
}
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2) {
WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
DEBUG_PROBE);
}
}
WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cp = &sc->pciide_channels[channel];
/* PIIX is compat-only */
if (pciide_chansetup(sc, channel, 0) == 0)
continue;
idetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
if ((PIIX_IDETIM_READ(idetim, channel) &
PIIX_IDETIM_IDE) == 0) {
printf("%s: %s channel ignored (disabled)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
continue;
}
/* PIIX are compat-only pciide devices */
pciide_mapchan(pa, cp, 0, &cmdsize, &ctlsize, pciide_pci_intr);
if (cp->hw_ok == 0)
continue;
if (pciide_chan_candisable(cp)) {
idetim = PIIX_IDETIM_CLEAR(idetim, PIIX_IDETIM_IDE,
channel);
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM,
idetim);
}
pciide_map_compat_intr(pa, cp, channel, 0);
if (cp->hw_ok == 0)
continue;
sc->sc_wdcdev.set_modes(&cp->wdc_channel);
}
WDCDEBUG_PRINT(("piix_setup_chip: idetim=0x%x",
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
DEBUG_PROBE);
if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
WDCDEBUG_PRINT((", sidetim=0x%x",
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
DEBUG_PROBE);
if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
WDCDEBUG_PRINT((", udamreg 0x%x",
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
DEBUG_PROBE);
}
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2) {
WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
DEBUG_PROBE);
}
}
WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
}
void
piix_setup_channel(chp)
struct channel_softc *chp;
{
u_int8_t mode[2], drive;
u_int32_t oidetim, idetim, idedma_ctl;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
struct ata_drive_datas *drvp = cp->wdc_channel.ch_drive;
oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, chp->channel);
idedma_ctl = 0;
/* set up new idetim: Enable IDE registers decode */
idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE,
chp->channel);
/* setup DMA */
pciide_channel_dma_setup(cp);
/*
* Here we have to mess up with drives mode: PIIX can't have
* different timings for master and slave drives.
* We need to find the best combination.
*/
/* If both drives supports DMA, take the lower mode */
if ((drvp[0].drive_flags & DRIVE_DMA) &&
(drvp[1].drive_flags & DRIVE_DMA)) {
mode[0] = mode[1] =
min(drvp[0].DMA_mode, drvp[1].DMA_mode);
drvp[0].DMA_mode = mode[0];
drvp[1].DMA_mode = mode[1];
goto ok;
}
/*
* If only one drive supports DMA, use its mode, and
* put the other one in PIO mode 0 if mode not compatible
*/
if (drvp[0].drive_flags & DRIVE_DMA) {
mode[0] = drvp[0].DMA_mode;
mode[1] = drvp[1].PIO_mode;
if (piix_isp_pio[mode[1]] != piix_isp_dma[mode[0]] ||
piix_rtc_pio[mode[1]] != piix_rtc_dma[mode[0]])
mode[1] = drvp[1].PIO_mode = 0;
goto ok;
}
if (drvp[1].drive_flags & DRIVE_DMA) {
mode[1] = drvp[1].DMA_mode;
mode[0] = drvp[0].PIO_mode;
if (piix_isp_pio[mode[0]] != piix_isp_dma[mode[1]] ||
piix_rtc_pio[mode[0]] != piix_rtc_dma[mode[1]])
mode[0] = drvp[0].PIO_mode = 0;
goto ok;
}
/*
* If both drives are not DMA, takes the lower mode, unless
* one of them is PIO mode < 2
*/
if (drvp[0].PIO_mode < 2) {
mode[0] = drvp[0].PIO_mode = 0;
mode[1] = drvp[1].PIO_mode;
} else if (drvp[1].PIO_mode < 2) {
mode[1] = drvp[1].PIO_mode = 0;
mode[0] = drvp[0].PIO_mode;
} else {
mode[0] = mode[1] =
min(drvp[1].PIO_mode, drvp[0].PIO_mode);
drvp[0].PIO_mode = mode[0];
drvp[1].PIO_mode = mode[1];
}
ok: /* The modes are setup */
for (drive = 0; drive < 2; drive++) {
if (drvp[drive].drive_flags & DRIVE_DMA) {
idetim |= piix_setup_idetim_timings(
mode[drive], 1, chp->channel);
goto end;
}
}
/* If we are there, none of the drives are DMA */
if (mode[0] >= 2)
idetim |= piix_setup_idetim_timings(
mode[0], 0, chp->channel);
else
idetim |= piix_setup_idetim_timings(
mode[1], 0, chp->channel);
end: /*
* timing mode is now set up in the controller. Enable
* it per-drive
*/
for (drive = 0; drive < 2; drive++) {
/* If no drive, skip */
if ((drvp[drive].drive_flags & DRIVE) == 0)
continue;
idetim |= piix_setup_idetim_drvs(&drvp[drive]);
if (drvp[drive].drive_flags & DRIVE_DMA)
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
}
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
idedma_ctl);
}
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
pciide_print_modes(cp);
}
void
piix3_4_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
u_int32_t oidetim, idetim, sidetim, udmareg, ideconf, idedma_ctl;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
int drive;
int channel = chp->channel;
oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
sidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM);
udmareg = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG);
ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG);
idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, channel);
sidetim &= ~(PIIX_SIDETIM_ISP_MASK(channel) |
PIIX_SIDETIM_RTC_MASK(channel));
idedma_ctl = 0;
/* If channel disabled, no need to go further */
if ((PIIX_IDETIM_READ(oidetim, channel) & PIIX_IDETIM_IDE) == 0)
return;
/* set up new idetim: Enable IDE registers decode */
idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE, channel);
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
for (drive = 0; drive < 2; drive++) {
udmareg &= ~(PIIX_UDMACTL_DRV_EN(channel, drive) |
PIIX_UDMATIM_SET(0x3, channel, drive));
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
(drvp->drive_flags & DRIVE_UDMA) == 0))
goto pio;
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2) {
ideconf |= PIIX_CONFIG_PINGPONG;
}
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BA_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801BAM_IDE ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_1 ||
sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801CA_IDE_2) {
/* setup Ultra/100 */
if (drvp->UDMA_mode > 2 &&
(ideconf & PIIX_CONFIG_CR(channel, drive)) == 0)
drvp->UDMA_mode = 2;
if (drvp->UDMA_mode > 4) {
ideconf |= PIIX_CONFIG_UDMA100(channel, drive);
} else {
ideconf &= ~PIIX_CONFIG_UDMA100(channel, drive);
if (drvp->UDMA_mode > 2) {
ideconf |= PIIX_CONFIG_UDMA66(channel,
drive);
} else {
ideconf &= ~PIIX_CONFIG_UDMA66(channel,
drive);
}
}
}
if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE) {
/* setup Ultra/66 */
if (drvp->UDMA_mode > 2 &&
(ideconf & PIIX_CONFIG_CR(channel, drive)) == 0)
drvp->UDMA_mode = 2;
if (drvp->UDMA_mode > 2)
ideconf |= PIIX_CONFIG_UDMA66(channel, drive);
else
ideconf &= ~PIIX_CONFIG_UDMA66(channel, drive);
}
if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
(drvp->drive_flags & DRIVE_UDMA)) {
/* use Ultra/DMA */
drvp->drive_flags &= ~DRIVE_DMA;
udmareg |= PIIX_UDMACTL_DRV_EN( channel, drive);
udmareg |= PIIX_UDMATIM_SET(
piix4_sct_udma[drvp->UDMA_mode], channel, drive);
} else {
/* use Multiword DMA */
drvp->drive_flags &= ~DRIVE_UDMA;
if (drive == 0) {
idetim |= piix_setup_idetim_timings(
drvp->DMA_mode, 1, channel);
} else {
sidetim |= piix_setup_sidetim_timings(
drvp->DMA_mode, 1, channel);
idetim =PIIX_IDETIM_SET(idetim,
PIIX_IDETIM_SITRE, channel);
}
}
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
pio: /* use PIO mode */
idetim |= piix_setup_idetim_drvs(drvp);
if (drive == 0) {
idetim |= piix_setup_idetim_timings(
drvp->PIO_mode, 0, channel);
} else {
sidetim |= piix_setup_sidetim_timings(
drvp->PIO_mode, 0, channel);
idetim =PIIX_IDETIM_SET(idetim,
PIIX_IDETIM_SITRE, channel);
}
}
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
idedma_ctl);
}
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM, sidetim);
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG, udmareg);
pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_CONFIG, ideconf);
pciide_print_modes(cp);
}
/* setup ISP and RTC fields, based on mode */
static u_int32_t
piix_setup_idetim_timings(mode, dma, channel)
u_int8_t mode;
u_int8_t dma;
u_int8_t channel;
{
if (dma)
return PIIX_IDETIM_SET(0,
PIIX_IDETIM_ISP_SET(piix_isp_dma[mode]) |
PIIX_IDETIM_RTC_SET(piix_rtc_dma[mode]),
channel);
else
return PIIX_IDETIM_SET(0,
PIIX_IDETIM_ISP_SET(piix_isp_pio[mode]) |
PIIX_IDETIM_RTC_SET(piix_rtc_pio[mode]),
channel);
}
/* setup DTE, PPE, IE and TIME field based on PIO mode */
static u_int32_t
piix_setup_idetim_drvs(drvp)
struct ata_drive_datas *drvp;
{
u_int32_t ret = 0;
struct channel_softc *chp = drvp->chnl_softc;
u_int8_t channel = chp->channel;
u_int8_t drive = drvp->drive;
/*
* If drive is using UDMA, timings setups are independant
* So just check DMA and PIO here.
*/
if (drvp->drive_flags & DRIVE_DMA) {
/* if mode = DMA mode 0, use compatible timings */
if ((drvp->drive_flags & DRIVE_DMA) &&
drvp->DMA_mode == 0) {
drvp->PIO_mode = 0;
return ret;
}
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
/*
* PIO and DMA timings are the same, use fast timings for PIO
* too, else use compat timings.
*/
if ((piix_isp_pio[drvp->PIO_mode] !=
piix_isp_dma[drvp->DMA_mode]) ||
(piix_rtc_pio[drvp->PIO_mode] !=
piix_rtc_dma[drvp->DMA_mode]))
drvp->PIO_mode = 0;
/* if PIO mode <= 2, use compat timings for PIO */
if (drvp->PIO_mode <= 2) {
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_DTE(drive),
channel);
return ret;
}
}
/*
* Now setup PIO modes. If mode < 2, use compat timings.
* Else enable fast timings. Enable IORDY and prefetch/post
* if PIO mode >= 3.
*/
if (drvp->PIO_mode < 2)
return ret;
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
if (drvp->PIO_mode >= 3) {
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_IE(drive), channel);
ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_PPE(drive), channel);
}
return ret;
}
/* setup values in SIDETIM registers, based on mode */
static u_int32_t
piix_setup_sidetim_timings(mode, dma, channel)
u_int8_t mode;
u_int8_t dma;
u_int8_t channel;
{
if (dma)
return PIIX_SIDETIM_ISP_SET(piix_isp_dma[mode], channel) |
PIIX_SIDETIM_RTC_SET(piix_rtc_dma[mode], channel);
else
return PIIX_SIDETIM_ISP_SET(piix_isp_pio[mode], channel) |
PIIX_SIDETIM_RTC_SET(piix_rtc_pio[mode], channel);
}
void
amd7x6_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
pcireg_t interface = PCI_INTERFACE(pa->pa_class);
int channel;
pcireg_t chanenable;
bus_size_t cmdsize, ctlsize;
if (pciide_chipen(sc, pa) == 0)
return;
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
printf("\n");
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
WDC_CAPABILITY_MODE;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
}
sc->sc_wdcdev.PIO_cap = 4;
sc->sc_wdcdev.DMA_cap = 2;
switch (sc->sc_pp->ide_product) {
case PCI_PRODUCT_AMD_PBC766_IDE:
case PCI_PRODUCT_AMD_PBC768_IDE:
case PCI_PRODUCT_AMD_PBC8111_IDE:
sc->sc_wdcdev.UDMA_cap = 5;
break;
default:
sc->sc_wdcdev.UDMA_cap = 4;
}
sc->sc_wdcdev.set_modes = amd7x6_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
chanenable = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD7X6_CHANSTATUS_EN);
WDCDEBUG_PRINT(("amd7x6_chip_map: Channel enable=0x%x\n", chanenable),
DEBUG_PROBE);
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
if ((chanenable & AMD7X6_CHAN_EN(channel)) == 0) {
printf("%s: %s channel ignored (disabled)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
continue;
}
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
pciide_pci_intr);
if (pciide_chan_candisable(cp))
chanenable &= ~AMD7X6_CHAN_EN(channel);
pciide_map_compat_intr(pa, cp, channel, interface);
if (cp->hw_ok == 0)
continue;
amd7x6_setup_channel(&cp->wdc_channel);
}
pci_conf_write(sc->sc_pc, sc->sc_tag, AMD7X6_CHANSTATUS_EN,
chanenable);
return;
}
void
amd7x6_setup_channel(chp)
struct channel_softc *chp;
{
u_int32_t udmatim_reg, datatim_reg;
u_int8_t idedma_ctl;
int mode, drive;
struct ata_drive_datas *drvp;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
#ifndef PCIIDE_AMD756_ENABLEDMA
int rev = PCI_REVISION(
pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG));
#endif
idedma_ctl = 0;
datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD7X6_DATATIM);
udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, AMD7X6_UDMA);
datatim_reg &= ~AMD7X6_DATATIM_MASK(chp->channel);
udmatim_reg &= ~AMD7X6_UDMA_MASK(chp->channel);
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
/* add timing values, setup DMA if needed */
if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
(drvp->drive_flags & DRIVE_UDMA) == 0)) {
mode = drvp->PIO_mode;
goto pio;
}
if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
(drvp->drive_flags & DRIVE_UDMA)) {
/* use Ultra/DMA */
drvp->drive_flags &= ~DRIVE_DMA;
udmatim_reg |= AMD7X6_UDMA_EN(chp->channel, drive) |
AMD7X6_UDMA_EN_MTH(chp->channel, drive) |
AMD7X6_UDMA_TIME(chp->channel, drive,
amd7x6_udma_tim[drvp->UDMA_mode]);
/* can use PIO timings, MW DMA unused */
mode = drvp->PIO_mode;
} else {
/* use Multiword DMA, but only if revision is OK */
drvp->drive_flags &= ~DRIVE_UDMA;
#ifndef PCIIDE_AMD756_ENABLEDMA
/*
* The workaround doesn't seem to be necessary
* with all drives, so it can be disabled by
* PCIIDE_AMD756_ENABLEDMA. It causes a hard hang if
* triggered.
*/
if (sc->sc_pp->ide_product ==
PCI_PRODUCT_AMD_PBC756_IDE &&
AMD756_CHIPREV_DISABLEDMA(rev)) {
printf("%s:%d:%d: multi-word DMA disabled due "
"to chip revision\n",
sc->sc_wdcdev.sc_dev.dv_xname,
chp->channel, drive);
mode = drvp->PIO_mode;
drvp->drive_flags &= ~DRIVE_DMA;
goto pio;
}
#endif
/* mode = min(pio, dma+2) */
if (drvp->PIO_mode <= (drvp->DMA_mode +2))
mode = drvp->PIO_mode;
else
mode = drvp->DMA_mode + 2;
}
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
pio: /* setup PIO mode */
if (mode <= 2) {
drvp->DMA_mode = 0;
drvp->PIO_mode = 0;
mode = 0;
} else {
drvp->PIO_mode = mode;
drvp->DMA_mode = mode - 2;
}
datatim_reg |=
AMD7X6_DATATIM_PULSE(chp->channel, drive,
amd7x6_pio_set[mode]) |
AMD7X6_DATATIM_RECOV(chp->channel, drive,
amd7x6_pio_rec[mode]);
}
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
idedma_ctl);
}
pciide_print_modes(cp);
pci_conf_write(sc->sc_pc, sc->sc_tag, AMD7X6_DATATIM, datatim_reg);
pci_conf_write(sc->sc_pc, sc->sc_tag, AMD7X6_UDMA, udmatim_reg);
}
void
apollo_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
pcireg_t interface = PCI_INTERFACE(pa->pa_class);
int channel;
u_int32_t ideconf;
bus_size_t cmdsize, ctlsize;
pcitag_t pcib_tag;
pcireg_t pcib_id, pcib_class;
if (pciide_chipen(sc, pa) == 0)
return;
/* get a PCI tag for the ISA bridge (function 0 of the same device) */
pcib_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0);
/* and read ID and rev of the ISA bridge */
pcib_id = pci_conf_read(sc->sc_pc, pcib_tag, PCI_ID_REG);
pcib_class = pci_conf_read(sc->sc_pc, pcib_tag, PCI_CLASS_REG);
printf(": VIA Technologies ");
switch (PCI_PRODUCT(pcib_id)) {
case PCI_PRODUCT_VIATECH_VT82C586_ISA:
printf("VT82C586 (Apollo VP) ");
if(PCI_REVISION(pcib_class) >= 0x02) {
printf("ATA33 controller\n");
sc->sc_wdcdev.UDMA_cap = 2;
} else {
printf("controller\n");
sc->sc_wdcdev.UDMA_cap = 0;
}
break;
case PCI_PRODUCT_VIATECH_VT82C596A:
printf("VT82C596A (Apollo Pro) ");
if (PCI_REVISION(pcib_class) >= 0x12) {
printf("ATA66 controller\n");
sc->sc_wdcdev.UDMA_cap = 4;
} else {
printf("ATA33 controller\n");
sc->sc_wdcdev.UDMA_cap = 2;
}
break;
case PCI_PRODUCT_VIATECH_VT82C686A_ISA:
printf("VT82C686A (Apollo KX133) ");
if (PCI_REVISION(pcib_class) >= 0x40) {
printf("ATA100 controller\n");
sc->sc_wdcdev.UDMA_cap = 5;
} else {
printf("ATA66 controller\n");
sc->sc_wdcdev.UDMA_cap = 4;
}
break;
case PCI_PRODUCT_VIATECH_VT8231:
printf("VT8231 ATA100 controller\n");
sc->sc_wdcdev.UDMA_cap = 5;
break;
case PCI_PRODUCT_VIATECH_VT8233:
printf("VT8233 ATA100 controller\n");
sc->sc_wdcdev.UDMA_cap = 5;
break;
case PCI_PRODUCT_VIATECH_VT8233A:
printf("VT8233A ATA100 controller\n");
sc->sc_wdcdev.UDMA_cap = 5;
break;
default:
printf("unknown ATA controller\n");
sc->sc_wdcdev.UDMA_cap = 0;
}
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
printf("\n");
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
WDC_CAPABILITY_MODE;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
if (sc->sc_wdcdev.UDMA_cap > 0)
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
}
sc->sc_wdcdev.PIO_cap = 4;
sc->sc_wdcdev.DMA_cap = 2;
sc->sc_wdcdev.set_modes = apollo_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
WDCDEBUG_PRINT(("apollo_chip_map: old APO_IDECONF=0x%x, "
"APO_CTLMISC=0x%x, APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF),
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_CTLMISC),
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)),
DEBUG_PROBE);
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF);
if ((ideconf & APO_IDECONF_EN(channel)) == 0) {
printf("%s: %s channel ignored (disabled)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
continue;
}
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
pciide_pci_intr);
if (cp->hw_ok == 0)
continue;
if (pciide_chan_candisable(cp)) {
ideconf &= ~APO_IDECONF_EN(channel);
pci_conf_write(sc->sc_pc, sc->sc_tag, APO_IDECONF,
ideconf);
}
pciide_map_compat_intr(pa, cp, channel, interface);
if (cp->hw_ok == 0)
continue;
apollo_setup_channel(&sc->pciide_channels[channel].wdc_channel);
}
WDCDEBUG_PRINT(("apollo_chip_map: APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)), DEBUG_PROBE);
}
void
apollo_setup_channel(chp)
struct channel_softc *chp;
{
u_int32_t udmatim_reg, datatim_reg;
u_int8_t idedma_ctl;
int mode, drive;
struct ata_drive_datas *drvp;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
idedma_ctl = 0;
datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM);
udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA);
datatim_reg &= ~APO_DATATIM_MASK(chp->channel);
udmatim_reg &= ~APO_UDMA_MASK(chp->channel);
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
/* add timing values, setup DMA if needed */
if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
(drvp->drive_flags & DRIVE_UDMA) == 0)) {
mode = drvp->PIO_mode;
goto pio;
}
if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
(drvp->drive_flags & DRIVE_UDMA)) {
/* use Ultra/DMA */
drvp->drive_flags &= ~DRIVE_DMA;
udmatim_reg |= APO_UDMA_EN(chp->channel, drive) |
APO_UDMA_EN_MTH(chp->channel, drive);
if (sc->sc_wdcdev.UDMA_cap == 5) {
/* 686b */
udmatim_reg |= APO_UDMA_CLK66(chp->channel);
udmatim_reg |= APO_UDMA_TIME(chp->channel,
drive, apollo_udma100_tim[drvp->UDMA_mode]);
} else if (sc->sc_wdcdev.UDMA_cap == 4) {
/* 596b or 686a */
udmatim_reg |= APO_UDMA_CLK66(chp->channel);
udmatim_reg |= APO_UDMA_TIME(chp->channel,
drive, apollo_udma66_tim[drvp->UDMA_mode]);
} else {
/* 596a or 586b */
udmatim_reg |= APO_UDMA_TIME(chp->channel,
drive, apollo_udma33_tim[drvp->UDMA_mode]);
}
/* can use PIO timings, MW DMA unused */
mode = drvp->PIO_mode;
} else {
/* use Multiword DMA */
drvp->drive_flags &= ~DRIVE_UDMA;
/* mode = min(pio, dma+2) */
if (drvp->PIO_mode <= (drvp->DMA_mode +2))
mode = drvp->PIO_mode;
else
mode = drvp->DMA_mode + 2;
}
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
pio: /* setup PIO mode */
if (mode <= 2) {
drvp->DMA_mode = 0;
drvp->PIO_mode = 0;
mode = 0;
} else {
drvp->PIO_mode = mode;
drvp->DMA_mode = mode - 2;
}
datatim_reg |=
APO_DATATIM_PULSE(chp->channel, drive,
apollo_pio_set[mode]) |
APO_DATATIM_RECOV(chp->channel, drive,
apollo_pio_rec[mode]);
}
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
idedma_ctl);
}
pciide_print_modes(cp);
pci_conf_write(sc->sc_pc, sc->sc_tag, APO_DATATIM, datatim_reg);
pci_conf_write(sc->sc_pc, sc->sc_tag, APO_UDMA, udmatim_reg);
}
void
cmd_channel_map(pa, sc, channel)
struct pci_attach_args *pa;
struct pciide_softc *sc;
int channel;
{
struct pciide_channel *cp = &sc->pciide_channels[channel];
bus_size_t cmdsize, ctlsize;
u_int8_t ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CTRL);
int interface, one_channel;
/*
* The 0648/0649 can be told to identify as a RAID controller.
* In this case, we have to fake interface
*/
if (PCI_SUBCLASS(pa->pa_class) != PCI_SUBCLASS_MASS_STORAGE_IDE) {
interface = PCIIDE_INTERFACE_SETTABLE(0) |
PCIIDE_INTERFACE_SETTABLE(1);
if (pciide_pci_read(pa->pa_pc, pa->pa_tag, CMD_CONF) &
CMD_CONF_DSA1)
interface |= PCIIDE_INTERFACE_PCI(0) |
PCIIDE_INTERFACE_PCI(1);
} else {
interface = PCI_INTERFACE(pa->pa_class);
}
sc->wdc_chanarray[channel] = &cp->wdc_channel;
cp->name = PCIIDE_CHANNEL_NAME(channel);
cp->wdc_channel.channel = channel;
cp->wdc_channel.wdc = &sc->sc_wdcdev;
/*
* Older CMD64X doesn't have independant channels
*/
switch (sc->sc_pp->ide_product) {
case PCI_PRODUCT_CMDTECH_649:
one_channel = 0;
break;
default:
one_channel = 1;
break;
}
if (channel > 0 && one_channel) {
cp->wdc_channel.ch_queue =
sc->pciide_channels[0].wdc_channel.ch_queue;
} else {
cp->wdc_channel.ch_queue =
malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
}
if (cp->wdc_channel.ch_queue == NULL) {
printf("%s %s channel: "
"can't allocate memory for command queue",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
return;
}
printf("%s: %s channel %s to %s mode\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
(interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
"configured" : "wired",
(interface & PCIIDE_INTERFACE_PCI(channel)) ?
"native-PCI" : "compatibility");
/*
* with a CMD PCI64x, if we get here, the first channel is enabled:
* there's no way to disable the first channel without disabling
* the whole device
*/
if (channel != 0 && (ctrl & CMD_CTRL_2PORT) == 0) {
printf("%s: %s channel ignored (disabled)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
return;
}
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, cmd_pci_intr);
if (cp->hw_ok == 0)
return;
if (channel == 1) {
if (pciide_chan_candisable(cp)) {
ctrl &= ~CMD_CTRL_2PORT;
pciide_pci_write(pa->pa_pc, pa->pa_tag,
CMD_CTRL, ctrl);
}
}
pciide_map_compat_intr(pa, cp, channel, interface);
}
int
cmd_pci_intr(arg)
void *arg;
{
struct pciide_softc *sc = arg;
struct pciide_channel *cp;
struct channel_softc *wdc_cp;
int i, rv, crv;
u_int32_t priirq, secirq;
rv = 0;
priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
cp = &sc->pciide_channels[i];
wdc_cp = &cp->wdc_channel;
/* If a compat channel skip. */
if (cp->compat)
continue;
if ((i == 0 && (priirq & CMD_CONF_DRV0_INTR)) ||
(i == 1 && (secirq & CMD_ARTTIM23_IRQ))) {
crv = wdcintr(wdc_cp);
if (crv == 0)
printf("%s:%d: bogus intr\n",
sc->sc_wdcdev.sc_dev.dv_xname, i);
else
rv = 1;
}
}
return rv;
}
void
cmd_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
int channel;
/*
* For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
* and base adresses registers can be disabled at
* hardware level. In this case, the device is wired
* in compat mode and its first channel is always enabled,
* but we can't rely on PCI_COMMAND_IO_ENABLE.
* In fact, it seems that the first channel of the CMD PCI0640
* can't be disabled.
*/
#ifdef PCIIDE_CMD064x_DISABLE
if (pciide_chipen(sc, pa) == 0)
return;
#endif
printf("%s: hardware does not support DMA\n",
sc->sc_wdcdev.sc_dev.dv_xname);
sc->sc_dma_ok = 0;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16;
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cmd_channel_map(pa, sc, channel);
}
}
void
cmd0643_9_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
int channel;
pcireg_t rev = PCI_REVISION(pa->pa_class);
/*
* For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
* and base adresses registers can be disabled at
* hardware level. In this case, the device is wired
* in compat mode and its first channel is always enabled,
* but we can't rely on PCI_COMMAND_IO_ENABLE.
* In fact, it seems that the first channel of the CMD PCI0640
* can't be disabled.
*/
#ifdef PCIIDE_CMD064x_DISABLE
if (pciide_chipen(sc, pa) == 0)
return;
#endif
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
printf("\n");
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
WDC_CAPABILITY_MODE;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
switch (sc->sc_pp->ide_product) {
case PCI_PRODUCT_CMDTECH_649:
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
sc->sc_wdcdev.UDMA_cap = 5;
sc->sc_wdcdev.irqack = cmd646_9_irqack;
break;
case PCI_PRODUCT_CMDTECH_648:
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
sc->sc_wdcdev.UDMA_cap = 4;
sc->sc_wdcdev.irqack = cmd646_9_irqack;
break;
case PCI_PRODUCT_CMDTECH_646:
if (rev >= CMD0646U2_REV) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
sc->sc_wdcdev.UDMA_cap = 2;
} else if (rev >= CMD0646U_REV) {
/*
* Linux's driver claims that the 646U is broken
* with UDMA. Only enable it if we know what we're
* doing
*/
#ifdef PCIIDE_CMD0646U_ENABLEUDMA
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
sc->sc_wdcdev.UDMA_cap = 2;
#endif
/* explicitly disable UDMA */
pciide_pci_write(sc->sc_pc, sc->sc_tag,
CMD_UDMATIM(0), 0);
pciide_pci_write(sc->sc_pc, sc->sc_tag,
CMD_UDMATIM(1), 0);
}
sc->sc_wdcdev.irqack = cmd646_9_irqack;
break;
default:
sc->sc_wdcdev.irqack = pciide_irqack;
}
}
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
sc->sc_wdcdev.PIO_cap = 4;
sc->sc_wdcdev.DMA_cap = 2;
sc->sc_wdcdev.set_modes = cmd0643_9_setup_channel;
WDCDEBUG_PRINT(("cmd0643_9_chip_map: old timings reg 0x%x 0x%x\n",
pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
DEBUG_PROBE);
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cp = &sc->pciide_channels[channel];
cmd_channel_map(pa, sc, channel);
if (cp->hw_ok == 0)
continue;
cmd0643_9_setup_channel(&cp->wdc_channel);
}
/*
* note - this also makes sure we clear the irq disable and reset
* bits
*/
pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_DMA_MODE, CMD_DMA_MULTIPLE);
WDCDEBUG_PRINT(("cmd0643_9_chip_map: timings reg now 0x%x 0x%x\n",
pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
DEBUG_PROBE);
}
void
cmd0643_9_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
u_int8_t tim;
u_int32_t idedma_ctl, udma_reg;
int drive;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
idedma_ctl = 0;
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
/* add timing values, setup DMA if needed */
tim = cmd0643_9_data_tim_pio[drvp->PIO_mode];
if (drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) {
if (drvp->drive_flags & DRIVE_UDMA) {
/* UltraDMA on a 646U2, 0648 or 0649 */
drvp->drive_flags &= ~DRIVE_DMA;
udma_reg = pciide_pci_read(sc->sc_pc,
sc->sc_tag, CMD_UDMATIM(chp->channel));
if (drvp->UDMA_mode > 2 &&
(pciide_pci_read(sc->sc_pc, sc->sc_tag,
CMD_BICSR) &
CMD_BICSR_80(chp->channel)) == 0)
drvp->UDMA_mode = 2;
if (drvp->UDMA_mode > 2)
udma_reg &= ~CMD_UDMATIM_UDMA33(drive);
else if (sc->sc_wdcdev.UDMA_cap > 2)
udma_reg |= CMD_UDMATIM_UDMA33(drive);
udma_reg |= CMD_UDMATIM_UDMA(drive);
udma_reg &= ~(CMD_UDMATIM_TIM_MASK <<
CMD_UDMATIM_TIM_OFF(drive));
udma_reg |=
(cmd0646_9_tim_udma[drvp->UDMA_mode] <<
CMD_UDMATIM_TIM_OFF(drive));
pciide_pci_write(sc->sc_pc, sc->sc_tag,
CMD_UDMATIM(chp->channel), udma_reg);
} else {
/*
* use Multiword DMA.
* Timings will be used for both PIO and DMA,
* so adjust DMA mode if needed
* if we have a 0646U2/8/9, turn off UDMA
*/
if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
udma_reg = pciide_pci_read(sc->sc_pc,
sc->sc_tag,
CMD_UDMATIM(chp->channel));
udma_reg &= ~CMD_UDMATIM_UDMA(drive);
pciide_pci_write(sc->sc_pc, sc->sc_tag,
CMD_UDMATIM(chp->channel),
udma_reg);
}
if (drvp->PIO_mode >= 3 &&
(drvp->DMA_mode + 2) > drvp->PIO_mode) {
drvp->DMA_mode = drvp->PIO_mode - 2;
}
tim = cmd0643_9_data_tim_dma[drvp->DMA_mode];
}
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
}
pciide_pci_write(sc->sc_pc, sc->sc_tag,
CMD_DATA_TIM(chp->channel, drive), tim);
}
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
idedma_ctl);
}
pciide_print_modes(cp);
}
void
cmd646_9_irqack(chp)
struct channel_softc *chp;
{
u_int32_t priirq, secirq;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
if (chp->channel == 0) {
priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_CONF, priirq);
} else {
secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23, secirq);
}
pciide_irqack(chp);
}
void
cy693_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
pcireg_t interface = PCI_INTERFACE(pa->pa_class);
bus_size_t cmdsize, ctlsize;
if (pciide_chipen(sc, pa) == 0)
return;
/*
* this chip has 2 PCI IDE functions, one for primary and one for
* secondary. So we need to call pciide_mapregs_compat() with
* the real channel
*/
if (pa->pa_function == 1) {
sc->sc_cy_compatchan = 0;
} else if (pa->pa_function == 2) {
sc->sc_cy_compatchan = 1;
} else {
printf("%s: unexpected PCI function %d\n",
sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function);
return;
}
if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
} else {
printf("%s: hardware does not support DMA",
sc->sc_wdcdev.sc_dev.dv_xname);
sc->sc_dma_ok = 0;
}
printf("\n");
sc->sc_cy_handle = cy82c693_init(pa->pa_iot);
if (sc->sc_cy_handle == NULL) {
printf("%s: unable to map hyperCache control registers\n",
sc->sc_wdcdev.sc_dev.dv_xname);
sc->sc_dma_ok = 0;
}
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
WDC_CAPABILITY_MODE;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
}
sc->sc_wdcdev.PIO_cap = 4;
sc->sc_wdcdev.DMA_cap = 2;
sc->sc_wdcdev.set_modes = cy693_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = 1;
/* Only one channel for this chip; if we are here it's enabled */
cp = &sc->pciide_channels[0];
sc->wdc_chanarray[0] = &cp->wdc_channel;
cp->name = PCIIDE_CHANNEL_NAME(0);
cp->wdc_channel.channel = 0;
cp->wdc_channel.wdc = &sc->sc_wdcdev;
cp->wdc_channel.ch_queue =
malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
if (cp->wdc_channel.ch_queue == NULL) {
printf("%s primary channel: "
"can't allocate memory for command queue",
sc->sc_wdcdev.sc_dev.dv_xname);
return;
}
printf("%s: primary channel %s to ",
sc->sc_wdcdev.sc_dev.dv_xname,
(interface & PCIIDE_INTERFACE_SETTABLE(0)) ?
"configured" : "wired");
if (interface & PCIIDE_INTERFACE_PCI(0)) {
printf("native-PCI");
cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize, &ctlsize,
pciide_pci_intr);
} else {
printf("compatibility");
cp->hw_ok = pciide_mapregs_compat(pa, cp, sc->sc_cy_compatchan,
&cmdsize, &ctlsize);
}
printf(" mode\n");
cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
wdcattach(&cp->wdc_channel);
if (pciide_chan_candisable(cp)) {
pci_conf_write(sc->sc_pc, sc->sc_tag,
PCI_COMMAND_STATUS_REG, 0);
}
pciide_map_compat_intr(pa, cp, sc->sc_cy_compatchan, interface);
if (cp->hw_ok == 0)
return;
WDCDEBUG_PRINT(("cy693_chip_map: old timings reg 0x%x\n",
pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)),DEBUG_PROBE);
cy693_setup_channel(&cp->wdc_channel);
WDCDEBUG_PRINT(("cy693_chip_map: new timings reg 0x%x\n",
pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)), DEBUG_PROBE);
}
void
cy693_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
int drive;
u_int32_t cy_cmd_ctrl;
u_int32_t idedma_ctl;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
int dma_mode = -1;
cy_cmd_ctrl = idedma_ctl = 0;
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
/* add timing values, setup DMA if needed */
if (drvp->drive_flags & DRIVE_DMA) {
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
/* use Multiword DMA */
if (dma_mode == -1 || dma_mode > drvp->DMA_mode)
dma_mode = drvp->DMA_mode;
}
cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
CY_CMD_CTRL_IOW_PULSE_OFF(drive));
cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
CY_CMD_CTRL_IOW_REC_OFF(drive));
cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
CY_CMD_CTRL_IOR_PULSE_OFF(drive));
cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
CY_CMD_CTRL_IOR_REC_OFF(drive));
}
pci_conf_write(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL, cy_cmd_ctrl);
chp->ch_drive[0].DMA_mode = dma_mode;
chp->ch_drive[1].DMA_mode = dma_mode;
if (dma_mode == -1)
dma_mode = 0;
if (sc->sc_cy_handle != NULL) {
/* Note: `multiple' is implied. */
cy82c693_write(sc->sc_cy_handle,
(sc->sc_cy_compatchan == 0) ?
CY_DMA_IDX_PRIMARY : CY_DMA_IDX_SECONDARY, dma_mode);
}
pciide_print_modes(cp);
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL, idedma_ctl);
}
}
static int
sis_hostbr_match(pa)
struct pci_attach_args *pa;
{
return ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SIS) &&
((PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SIS_645) ||
(PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SIS_650) ||
(PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SIS_730) ||
(PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SIS_735)));
}
void
sis_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
int channel;
u_int8_t sis_ctr0 = pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_CTRL0);
pcireg_t interface = PCI_INTERFACE(pa->pa_class);
pcireg_t rev = PCI_REVISION(pa->pa_class);
bus_size_t cmdsize, ctlsize;
pcitag_t pchb_tag;
pcireg_t pchb_id, pchb_class;
if (pciide_chipen(sc, pa) == 0)
return;
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
printf("\n");
/* get a PCI tag for the host bridge (function 0 of the same device) */
pchb_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0);
/* and read ID and rev of the ISA bridge */
pchb_id = pci_conf_read(sc->sc_pc, pchb_tag, PCI_ID_REG);
pchb_class = pci_conf_read(sc->sc_pc, pchb_tag, PCI_CLASS_REG);
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
WDC_CAPABILITY_MODE;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
/*
* controllers associated to a rev 0x2 530 Host to PCI Bridge
* have problems with UDMA (info provided by Christos)
*/
if (rev >= 0xd0 &&
(PCI_PRODUCT(pchb_id) != PCI_PRODUCT_SIS_530HB ||
PCI_REVISION(pchb_class) >= 0x03))
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
}
sc->sc_wdcdev.PIO_cap = 4;
sc->sc_wdcdev.DMA_cap = 2;
if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA)
/*
* Use UDMA/100 on SiS 735 chipset and UDMA/33 on other
* chipsets.
*/
sc->sc_wdcdev.UDMA_cap =
pci_find_device(pa, sis_hostbr_match) ? 5 : 2;
sc->sc_wdcdev.set_modes = sis_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_MISC,
pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_MISC) |
SIS_MISC_TIM_SEL | SIS_MISC_FIFO_SIZE);
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
if ((channel == 0 && (sis_ctr0 & SIS_CTRL0_CHAN0_EN) == 0) ||
(channel == 1 && (sis_ctr0 & SIS_CTRL0_CHAN1_EN) == 0)) {
printf("%s: %s channel ignored (disabled)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
continue;
}
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
pciide_pci_intr);
if (cp->hw_ok == 0)
continue;
if (pciide_chan_candisable(cp)) {
if (channel == 0)
sis_ctr0 &= ~SIS_CTRL0_CHAN0_EN;
else
sis_ctr0 &= ~SIS_CTRL0_CHAN1_EN;
pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_CTRL0,
sis_ctr0);
}
pciide_map_compat_intr(pa, cp, channel, interface);
if (cp->hw_ok == 0)
continue;
sis_setup_channel(&cp->wdc_channel);
}
}
void
sis_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
int drive;
u_int32_t sis_tim;
u_int32_t idedma_ctl;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
WDCDEBUG_PRINT(("sis_setup_channel: old timings reg for "
"channel %d 0x%x\n", chp->channel,
pci_conf_read(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel))),
DEBUG_PROBE);
sis_tim = 0;
idedma_ctl = 0;
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
/* add timing values, setup DMA if needed */
if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
(drvp->drive_flags & DRIVE_UDMA) == 0)
goto pio;
if (drvp->drive_flags & DRIVE_UDMA) {
/* use Ultra/DMA */
drvp->drive_flags &= ~DRIVE_DMA;
sis_tim |= sis_udma_tim[drvp->UDMA_mode] <<
SIS_TIM_UDMA_TIME_OFF(drive);
sis_tim |= SIS_TIM_UDMA_EN(drive);
} else {
/*
* use Multiword DMA
* Timings will be used for both PIO and DMA,
* so adjust DMA mode if needed
*/
if (drvp->PIO_mode > (drvp->DMA_mode + 2))
drvp->PIO_mode = drvp->DMA_mode + 2;
if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
drvp->DMA_mode = (drvp->PIO_mode > 2) ?
drvp->PIO_mode - 2 : 0;
if (drvp->DMA_mode == 0)
drvp->PIO_mode = 0;
}
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
pio: sis_tim |= sis_pio_act[drvp->PIO_mode] <<
SIS_TIM_ACT_OFF(drive);
sis_tim |= sis_pio_rec[drvp->PIO_mode] <<
SIS_TIM_REC_OFF(drive);
}
WDCDEBUG_PRINT(("sis_setup_channel: new timings reg for "
"channel %d 0x%x\n", chp->channel, sis_tim), DEBUG_PROBE);
pci_conf_write(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel), sis_tim);
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL, idedma_ctl);
}
pciide_print_modes(cp);
}
void
acer_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
int channel;
pcireg_t cr, interface;
bus_size_t cmdsize, ctlsize;
pcireg_t rev = PCI_REVISION(pa->pa_class);
if (pciide_chipen(sc, pa) == 0)
return;
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
printf("\n");
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
WDC_CAPABILITY_MODE;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
if (rev >= 0x20) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
if (rev >= 0xC4)
sc->sc_wdcdev.UDMA_cap = 5;
else if (rev >= 0xC2)
sc->sc_wdcdev.UDMA_cap = 4;
else
sc->sc_wdcdev.UDMA_cap = 2;
}
sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
}
sc->sc_wdcdev.PIO_cap = 4;
sc->sc_wdcdev.DMA_cap = 2;
sc->sc_wdcdev.set_modes = acer_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CDRC,
(pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CDRC) |
ACER_CDRC_DMA_EN) & ~ACER_CDRC_FIFO_DISABLE);
/* Enable "microsoft register bits" R/W. */
pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR3,
pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR3) | ACER_CCAR3_PI);
pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR1,
pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR1) &
~(ACER_CHANSTATUS_RO|PCIIDE_CHAN_RO(0)|PCIIDE_CHAN_RO(1)));
pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR2,
pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR2) &
~ACER_CHANSTATUSREGS_RO);
cr = pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG);
cr |= (PCIIDE_CHANSTATUS_EN << PCI_INTERFACE_SHIFT);
pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG, cr);
/* Don't use cr, re-read the real register content instead */
interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc, sc->sc_tag,
PCI_CLASS_REG));
/* From linux: enable "Cable Detection" */
if (rev >= 0xC2) {
pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_0x4B,
pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_0x4B)
| ACER_0x4B_CDETECT);
}
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
if ((interface & PCIIDE_CHAN_EN(channel)) == 0) {
printf("%s: %s channel ignored (disabled)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
continue;
}
/* newer controllers seems to lack the ACER_CHIDS. Sigh */
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
(rev >= 0xC2) ? pciide_pci_intr : acer_pci_intr);
if (cp->hw_ok == 0)
continue;
if (pciide_chan_candisable(cp)) {
cr &= ~(PCIIDE_CHAN_EN(channel) << PCI_INTERFACE_SHIFT);
pci_conf_write(sc->sc_pc, sc->sc_tag,
PCI_CLASS_REG, cr);
}
pciide_map_compat_intr(pa, cp, channel, interface);
acer_setup_channel(&cp->wdc_channel);
}
}
void
acer_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
int drive;
u_int32_t acer_fifo_udma;
u_int32_t idedma_ctl;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
idedma_ctl = 0;
acer_fifo_udma = pci_conf_read(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA);
WDCDEBUG_PRINT(("acer_setup_channel: old fifo/udma reg 0x%x\n",
acer_fifo_udma), DEBUG_PROBE);
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
if ((chp->ch_drive[0].drive_flags | chp->ch_drive[1].drive_flags) &
DRIVE_UDMA) { /* check 80 pins cable */
if (pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_0x4A) &
ACER_0x4A_80PIN(chp->channel)) {
if (chp->ch_drive[0].UDMA_mode > 2)
chp->ch_drive[0].UDMA_mode = 2;
if (chp->ch_drive[1].UDMA_mode > 2)
chp->ch_drive[1].UDMA_mode = 2;
}
}
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
WDCDEBUG_PRINT(("acer_setup_channel: old timings reg for "
"channel %d drive %d 0x%x\n", chp->channel, drive,
pciide_pci_read(sc->sc_pc, sc->sc_tag,
ACER_IDETIM(chp->channel, drive))), DEBUG_PROBE);
/* clear FIFO/DMA mode */
acer_fifo_udma &= ~(ACER_FTH_OPL(chp->channel, drive, 0x3) |
ACER_UDMA_EN(chp->channel, drive) |
ACER_UDMA_TIM(chp->channel, drive, 0x7));
/* add timing values, setup DMA if needed */
if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
(drvp->drive_flags & DRIVE_UDMA) == 0) {
acer_fifo_udma |=
ACER_FTH_OPL(chp->channel, drive, 0x1);
goto pio;
}
acer_fifo_udma |= ACER_FTH_OPL(chp->channel, drive, 0x2);
if (drvp->drive_flags & DRIVE_UDMA) {
/* use Ultra/DMA */
drvp->drive_flags &= ~DRIVE_DMA;
acer_fifo_udma |= ACER_UDMA_EN(chp->channel, drive);
acer_fifo_udma |=
ACER_UDMA_TIM(chp->channel, drive,
acer_udma[drvp->UDMA_mode]);
/* XXX disable if one drive < UDMA3 ? */
if (drvp->UDMA_mode >= 3) {
pciide_pci_write(sc->sc_pc, sc->sc_tag,
ACER_0x4B,
pciide_pci_read(sc->sc_pc, sc->sc_tag,
ACER_0x4B) | ACER_0x4B_UDMA66);
}
} else {
/*
* use Multiword DMA
* Timings will be used for both PIO and DMA,
* so adjust DMA mode if needed
*/
if (drvp->PIO_mode > (drvp->DMA_mode + 2))
drvp->PIO_mode = drvp->DMA_mode + 2;
if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
drvp->DMA_mode = (drvp->PIO_mode > 2) ?
drvp->PIO_mode - 2 : 0;
if (drvp->DMA_mode == 0)
drvp->PIO_mode = 0;
}
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
pio: pciide_pci_write(sc->sc_pc, sc->sc_tag,
ACER_IDETIM(chp->channel, drive),
acer_pio[drvp->PIO_mode]);
}
WDCDEBUG_PRINT(("acer_setup_channel: new fifo/udma reg 0x%x\n",
acer_fifo_udma), DEBUG_PROBE);
pci_conf_write(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA, acer_fifo_udma);
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL, idedma_ctl);
}
pciide_print_modes(cp);
}
int
acer_pci_intr(arg)
void *arg;
{
struct pciide_softc *sc = arg;
struct pciide_channel *cp;
struct channel_softc *wdc_cp;
int i, rv, crv;
u_int32_t chids;
rv = 0;
chids = pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CHIDS);
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
cp = &sc->pciide_channels[i];
wdc_cp = &cp->wdc_channel;
/* If a compat channel skip. */
if (cp->compat)
continue;
if (chids & ACER_CHIDS_INT(i)) {
crv = wdcintr(wdc_cp);
if (crv == 0)
printf("%s:%d: bogus intr\n",
sc->sc_wdcdev.sc_dev.dv_xname, i);
else
rv = 1;
}
}
return rv;
}
void
hpt_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
int i, compatchan, revision;
pcireg_t interface;
bus_size_t cmdsize, ctlsize;
if (pciide_chipen(sc, pa) == 0)
return;
revision = PCI_REVISION(pa->pa_class);
printf(": Triones/Highpoint ");
if (sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT374)
printf("HPT374 IDE Controller\n");
else if (sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT366) {
if (revision == HPT370_REV)
printf("HPT370 IDE Controller\n");
else if (revision == HPT370A_REV)
printf("HPT370A IDE Controller\n");
else if (revision == HPT366_REV)
printf("HPT366 IDE Controller\n");
else
printf("unknown HPT IDE controller rev %d\n", revision);
} else
printf("unknown HPT IDE controller 0x%x\n",
sc->sc_pp->ide_product);
/*
* when the chip is in native mode it identifies itself as a
* 'misc mass storage'. Fake interface in this case.
*/
if (PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
interface = PCI_INTERFACE(pa->pa_class);
} else {
interface = PCIIDE_INTERFACE_BUS_MASTER_DMA |
PCIIDE_INTERFACE_PCI(0);
if ((sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT366 &&
(revision == HPT370_REV || revision == HPT370A_REV)) ||
sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT374)
interface |= PCIIDE_INTERFACE_PCI(1);
}
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
printf("\n");
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
WDC_CAPABILITY_MODE;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
}
sc->sc_wdcdev.PIO_cap = 4;
sc->sc_wdcdev.DMA_cap = 2;
sc->sc_wdcdev.set_modes = hpt_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
if (sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT366 &&
revision == HPT366_REV) {
sc->sc_wdcdev.UDMA_cap = 4;
/*
* The 366 has 2 PCI IDE functions, one for primary and one
* for secondary. So we need to call pciide_mapregs_compat()
* with the real channel
*/
if (pa->pa_function == 0) {
compatchan = 0;
} else if (pa->pa_function == 1) {
compatchan = 1;
} else {
printf("%s: unexpected PCI function %d\n",
sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function);
return;
}
sc->sc_wdcdev.nchannels = 1;
} else {
sc->sc_wdcdev.nchannels = 2;
if (sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT374)
sc->sc_wdcdev.UDMA_cap = 6;
else
sc->sc_wdcdev.UDMA_cap = 5;
}
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
cp = &sc->pciide_channels[i];
if (sc->sc_wdcdev.nchannels > 1) {
compatchan = i;
if((pciide_pci_read(sc->sc_pc, sc->sc_tag,
HPT370_CTRL1(i)) & HPT370_CTRL1_EN) == 0) {
printf("%s: %s channel ignored (disabled)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
continue;
}
}
if (pciide_chansetup(sc, i, interface) == 0)
continue;
if (interface & PCIIDE_INTERFACE_PCI(i)) {
cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
&ctlsize, hpt_pci_intr);
} else {
cp->hw_ok = pciide_mapregs_compat(pa, cp, compatchan,
&cmdsize, &ctlsize);
}
if (cp->hw_ok == 0)
return;
cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
wdcattach(&cp->wdc_channel);
hpt_setup_channel(&cp->wdc_channel);
}
if ((sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT366 &&
(revision == HPT370_REV || revision == HPT370A_REV)) ||
sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT374) {
/*
* HPT370_REV and highter has a bit to disable interrupts,
* make sure to clear it
*/
pciide_pci_write(sc->sc_pc, sc->sc_tag, HPT_CSEL,
pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_CSEL) &
~HPT_CSEL_IRQDIS);
}
/* set clocks, etc (mandatory on 374, optional otherwise) */
if (sc->sc_pp->ide_product == PCI_PRODUCT_TRIONES_HPT374)
pciide_pci_write(sc->sc_pc, sc->sc_tag, HPT_SC2,
(pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_SC2) &
HPT_SC2_MAEN) | HPT_SC2_OSC_EN);
return;
}
void
hpt_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
int drive;
int cable;
u_int32_t before, after;
u_int32_t idedma_ctl;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
cable = pciide_pci_read(sc->sc_pc, sc->sc_tag, HPT_CSEL);
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
idedma_ctl = 0;
/* Per drive settings */
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
before = pci_conf_read(sc->sc_pc, sc->sc_tag,
HPT_IDETIM(chp->channel, drive));
/* add timing values, setup DMA if needed */
if (drvp->drive_flags & DRIVE_UDMA) {
/* use Ultra/DMA */
drvp->drive_flags &= ~DRIVE_DMA;
if ((cable & HPT_CSEL_CBLID(chp->channel)) != 0 &&
drvp->UDMA_mode > 2)
drvp->UDMA_mode = 2;
after = (sc->sc_wdcdev.nchannels == 2) ?
( (sc->sc_wdcdev.UDMA_cap == 6) ?
hpt374_udma[drvp->UDMA_mode] :
hpt370_udma[drvp->UDMA_mode]) :
hpt366_udma[drvp->UDMA_mode];
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
} else if (drvp->drive_flags & DRIVE_DMA) {
/*
* use Multiword DMA.
* Timings will be used for both PIO and DMA, so adjust
* DMA mode if needed
*/
if (drvp->PIO_mode >= 3 &&
(drvp->DMA_mode + 2) > drvp->PIO_mode) {
drvp->DMA_mode = drvp->PIO_mode - 2;
}
after = (sc->sc_wdcdev.nchannels == 2) ?
( (sc->sc_wdcdev.UDMA_cap == 6) ?
hpt374_dma[drvp->DMA_mode] :
hpt370_dma[drvp->DMA_mode]) :
hpt366_dma[drvp->DMA_mode];
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
} else {
/* PIO only */
after = (sc->sc_wdcdev.nchannels == 2) ?
( (sc->sc_wdcdev.UDMA_cap == 6) ?
hpt374_pio[drvp->PIO_mode] :
hpt370_pio[drvp->PIO_mode]) :
hpt366_pio[drvp->PIO_mode];
}
pci_conf_write(sc->sc_pc, sc->sc_tag,
HPT_IDETIM(chp->channel, drive), after);
WDCDEBUG_PRINT(("%s: bus speed register set to 0x%08x "
"(BIOS 0x%08x)\n", drvp->drv_softc->dv_xname,
after, before), DEBUG_PROBE);
}
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL, idedma_ctl);
}
pciide_print_modes(cp);
}
int
hpt_pci_intr(arg)
void *arg;
{
struct pciide_softc *sc = arg;
struct pciide_channel *cp;
struct channel_softc *wdc_cp;
int rv = 0;
int dmastat, i, crv;
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
if((dmastat & ( IDEDMA_CTL_ACT | IDEDMA_CTL_INTR)) !=
IDEDMA_CTL_INTR)
continue;
cp = &sc->pciide_channels[i];
wdc_cp = &cp->wdc_channel;
crv = wdcintr(wdc_cp);
if (crv == 0) {
printf("%s:%d: bogus intr\n",
sc->sc_wdcdev.sc_dev.dv_xname, i);
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * i, dmastat);
} else
rv = 1;
}
return rv;
}
/* Macros to test product */
#define PDC_IS_262(sc) \
((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA66 || \
(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100 || \
(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100X || \
(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2 || \
(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2v2 || \
(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133)
#define PDC_IS_265(sc) \
((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100 || \
(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100X || \
(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2 || \
(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2v2 || \
(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133)
#define PDC_IS_268(sc) \
((sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2 || \
(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA100TX2v2 || \
(sc)->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA133)
void
pdc202xx_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
int channel;
pcireg_t interface, st, mode;
bus_size_t cmdsize, ctlsize;
if (!PDC_IS_268(sc)) {
st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE);
WDCDEBUG_PRINT(("pdc202xx_setup_chip: controller state 0x%x\n",
st), DEBUG_PROBE);
}
if (pciide_chipen(sc, pa) == 0)
return;
/* turn off RAID mode */
if (!PDC_IS_268(sc))
st &= ~PDC2xx_STATE_IDERAID;
/*
* can't rely on the PCI_CLASS_REG content if the chip was in raid
* mode. We have to fake interface
*/
interface = PCIIDE_INTERFACE_SETTABLE(0) | PCIIDE_INTERFACE_SETTABLE(1);
if (PDC_IS_268(sc) || (st & PDC2xx_STATE_NATIVE))
interface |= PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
printf("\n");
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
WDC_CAPABILITY_MODE;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
}
sc->sc_wdcdev.PIO_cap = 4;
sc->sc_wdcdev.DMA_cap = 2;
if (PDC_IS_265(sc))
sc->sc_wdcdev.UDMA_cap = 5;
else if (PDC_IS_262(sc))
sc->sc_wdcdev.UDMA_cap = 4;
else
sc->sc_wdcdev.UDMA_cap = 2;
sc->sc_wdcdev.set_modes = PDC_IS_268(sc) ?
pdc20268_setup_channel : pdc202xx_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
if (!PDC_IS_268(sc)) {
/* setup failsafe defaults */
mode = 0;
mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[0]);
mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[0]);
mode = PDC2xx_TIM_SET_MB(mode, pdc2xx_dma_mb[0]);
mode = PDC2xx_TIM_SET_MC(mode, pdc2xx_dma_mc[0]);
for (channel = 0;
channel < sc->sc_wdcdev.nchannels;
channel++) {
WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d "
"drive 0 initial timings 0x%x, now 0x%x\n",
channel, pci_conf_read(sc->sc_pc, sc->sc_tag,
PDC2xx_TIM(channel, 0)), mode | PDC2xx_TIM_IORDYp),
DEBUG_PROBE);
pci_conf_write(sc->sc_pc, sc->sc_tag,
PDC2xx_TIM(channel, 0), mode | PDC2xx_TIM_IORDYp);
WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d "
"drive 1 initial timings 0x%x, now 0x%x\n",
channel, pci_conf_read(sc->sc_pc, sc->sc_tag,
PDC2xx_TIM(channel, 1)), mode), DEBUG_PROBE);
pci_conf_write(sc->sc_pc, sc->sc_tag,
PDC2xx_TIM(channel, 1), mode);
}
mode = PDC2xx_SCR_DMA;
if (PDC_IS_262(sc)) {
mode = PDC2xx_SCR_SET_GEN(mode, PDC262_SCR_GEN_LAT);
} else {
/* the BIOS set it up this way */
mode = PDC2xx_SCR_SET_GEN(mode, 0x1);
}
mode = PDC2xx_SCR_SET_I2C(mode, 0x3); /* ditto */
mode = PDC2xx_SCR_SET_POLL(mode, 0x1); /* ditto */
WDCDEBUG_PRINT(("pdc202xx_setup_chip: initial SCR 0x%x, "
"now 0x%x\n",
bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh,
PDC2xx_SCR),
mode), DEBUG_PROBE);
bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
PDC2xx_SCR, mode);
/* controller initial state register is OK even without BIOS */
/* Set DMA mode to IDE DMA compatibility */
mode =
bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM);
WDCDEBUG_PRINT(("pdc202xx_setup_chip: primary mode 0x%x", mode),
DEBUG_PROBE);
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM,
mode | 0x1);
mode =
bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM);
WDCDEBUG_PRINT((", secondary mode 0x%x\n", mode ), DEBUG_PROBE);
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM,
mode | 0x1);
}
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
if (!PDC_IS_268(sc) && (st & (PDC_IS_262(sc) ?
PDC262_STATE_EN(channel):PDC246_STATE_EN(channel))) == 0) {
printf("%s: %s channel ignored (disabled)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
continue;
}
if (PDC_IS_265(sc))
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
pdc20265_pci_intr);
else
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
pdc202xx_pci_intr);
if (cp->hw_ok == 0)
continue;
if (!PDC_IS_268(sc) && pciide_chan_candisable(cp))
st &= ~(PDC_IS_262(sc) ?
PDC262_STATE_EN(channel):PDC246_STATE_EN(channel));
pciide_map_compat_intr(pa, cp, channel, interface);
sc->sc_wdcdev.set_modes(&cp->wdc_channel);
}
if (!PDC_IS_268(sc)) {
WDCDEBUG_PRINT(("pdc202xx_setup_chip: new controller state "
"0x%x\n", st), DEBUG_PROBE);
pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_STATE, st);
}
return;
}
void
pdc202xx_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
int drive;
pcireg_t mode, st;
u_int32_t idedma_ctl, scr, atapi;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
int channel = chp->channel;
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
idedma_ctl = 0;
WDCDEBUG_PRINT(("pdc202xx_setup_channel %s: scr 0x%x\n",
sc->sc_wdcdev.sc_dev.dv_xname,
bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC262_U66)),
DEBUG_PROBE);
/* Per channel settings */
if (PDC_IS_262(sc)) {
scr = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
PDC262_U66);
st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE);
/* Trim UDMA mode */
if ((st & PDC262_STATE_80P(channel)) != 0 ||
(chp->ch_drive[0].drive_flags & DRIVE_UDMA &&
chp->ch_drive[0].UDMA_mode <= 2) ||
(chp->ch_drive[1].drive_flags & DRIVE_UDMA &&
chp->ch_drive[1].UDMA_mode <= 2)) {
if (chp->ch_drive[0].UDMA_mode > 2)
chp->ch_drive[0].UDMA_mode = 2;
if (chp->ch_drive[1].UDMA_mode > 2)
chp->ch_drive[1].UDMA_mode = 2;
}
/* Set U66 if needed */
if ((chp->ch_drive[0].drive_flags & DRIVE_UDMA &&
chp->ch_drive[0].UDMA_mode > 2) ||
(chp->ch_drive[1].drive_flags & DRIVE_UDMA &&
chp->ch_drive[1].UDMA_mode > 2))
scr |= PDC262_U66_EN(channel);
else
scr &= ~PDC262_U66_EN(channel);
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
PDC262_U66, scr);
WDCDEBUG_PRINT(("pdc202xx_setup_channel %s:%d: ATAPI 0x%x\n",
sc->sc_wdcdev.sc_dev.dv_xname, channel,
bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh,
PDC262_ATAPI(channel))), DEBUG_PROBE);
if (chp->ch_drive[0].drive_flags & DRIVE_ATAPI ||
chp->ch_drive[1].drive_flags & DRIVE_ATAPI) {
if (((chp->ch_drive[0].drive_flags & DRIVE_UDMA) &&
!(chp->ch_drive[1].drive_flags & DRIVE_UDMA) &&
(chp->ch_drive[1].drive_flags & DRIVE_DMA)) ||
((chp->ch_drive[1].drive_flags & DRIVE_UDMA) &&
!(chp->ch_drive[0].drive_flags & DRIVE_UDMA) &&
(chp->ch_drive[0].drive_flags & DRIVE_DMA)))
atapi = 0;
else
atapi = PDC262_ATAPI_UDMA;
bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
PDC262_ATAPI(channel), atapi);
}
}
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
mode = 0;
if (drvp->drive_flags & DRIVE_UDMA) {
/* use Ultra/DMA */
drvp->drive_flags &= ~DRIVE_DMA;
mode = PDC2xx_TIM_SET_MB(mode,
pdc2xx_udma_mb[drvp->UDMA_mode]);
mode = PDC2xx_TIM_SET_MC(mode,
pdc2xx_udma_mc[drvp->UDMA_mode]);
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
} else if (drvp->drive_flags & DRIVE_DMA) {
mode = PDC2xx_TIM_SET_MB(mode,
pdc2xx_dma_mb[drvp->DMA_mode]);
mode = PDC2xx_TIM_SET_MC(mode,
pdc2xx_dma_mc[drvp->DMA_mode]);
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
} else {
mode = PDC2xx_TIM_SET_MB(mode,
pdc2xx_dma_mb[0]);
mode = PDC2xx_TIM_SET_MC(mode,
pdc2xx_dma_mc[0]);
}
mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[drvp->PIO_mode]);
mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[drvp->PIO_mode]);
if (drvp->drive_flags & DRIVE_ATA)
mode |= PDC2xx_TIM_PRE;
mode |= PDC2xx_TIM_SYNC | PDC2xx_TIM_ERRDY;
if (drvp->PIO_mode >= 3) {
mode |= PDC2xx_TIM_IORDY;
if (drive == 0)
mode |= PDC2xx_TIM_IORDYp;
}
WDCDEBUG_PRINT(("pdc202xx_setup_channel: %s:%d:%d "
"timings 0x%x\n",
sc->sc_wdcdev.sc_dev.dv_xname,
chp->channel, drive, mode), DEBUG_PROBE);
pci_conf_write(sc->sc_pc, sc->sc_tag,
PDC2xx_TIM(chp->channel, drive), mode);
}
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL, idedma_ctl);
}
pciide_print_modes(cp);
}
void
pdc20268_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
int drive;
u_int32_t idedma_ctl;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
int u100;
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
idedma_ctl = 0;
/* I don't know what this is for, FreeBSD does it ... */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CMD + 0x1, 0x0b);
/*
* I don't know what this is for; FreeBSD checks this ... this is not
* cable type detect.
*/
u100 = (bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CMD + 0x3) & 0x04) ? 0 : 1;
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
if (drvp->drive_flags & DRIVE_UDMA) {
/* use Ultra/DMA */
drvp->drive_flags &= ~DRIVE_DMA;
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
if (drvp->UDMA_mode > 2 && u100 == 0)
drvp->UDMA_mode = 2;
} else if (drvp->drive_flags & DRIVE_DMA) {
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
}
}
/* nothing to do to setup modes, the controller snoop SET_FEATURE cmd */
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL, idedma_ctl);
}
pciide_print_modes(cp);
}
int
pdc202xx_pci_intr(arg)
void *arg;
{
struct pciide_softc *sc = arg;
struct pciide_channel *cp;
struct channel_softc *wdc_cp;
int i, rv, crv;
u_int32_t scr;
rv = 0;
scr = bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR);
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
cp = &sc->pciide_channels[i];
wdc_cp = &cp->wdc_channel;
/* If a compat channel skip. */
if (cp->compat)
continue;
if (scr & PDC2xx_SCR_INT(i)) {
crv = wdcintr(wdc_cp);
if (crv == 0)
printf("%s:%d: bogus intr (reg 0x%x)\n",
sc->sc_wdcdev.sc_dev.dv_xname, i, scr);
else
rv = 1;
}
}
return rv;
}
int
pdc20265_pci_intr(arg)
void *arg;
{
struct pciide_softc *sc = arg;
struct pciide_channel *cp;
struct channel_softc *wdc_cp;
int i, rv, crv;
u_int32_t dmastat;
rv = 0;
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
cp = &sc->pciide_channels[i];
wdc_cp = &cp->wdc_channel;
/* If a compat channel skip. */
if (cp->compat)
continue;
/*
* The Ultra/100 seems to assert PDC2xx_SCR_INT * spuriously,
* however it asserts INT in IDEDMA_CTL even for non-DMA ops.
* So use it instead (requires 2 reg reads instead of 1,
* but we can't do it another way).
*/
dmastat = bus_space_read_1(sc->sc_dma_iot,
sc->sc_dma_ioh, IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
if((dmastat & IDEDMA_CTL_INTR) == 0)
continue;
crv = wdcintr(wdc_cp);
if (crv == 0)
printf("%s:%d: bogus intr\n",
sc->sc_wdcdev.sc_dev.dv_xname, i);
else
rv = 1;
}
return rv;
}
void
opti_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
bus_size_t cmdsize, ctlsize;
pcireg_t interface;
u_int8_t init_ctrl;
int channel;
if (pciide_chipen(sc, pa) == 0)
return;
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
/*
* XXXSCW:
* There seem to be a couple of buggy revisions/implementations
* of the OPTi pciide chipset. This kludge seems to fix one of
* the reported problems (PR/11644) but still fails for the
* other (PR/13151), although the latter may be due to other
* issues too...
*/
if (PCI_REVISION(pa->pa_class) <= 0x12) {
printf(" but disabled due to chip rev. <= 0x12");
sc->sc_dma_ok = 0;
} else
pciide_mapreg_dma(sc, pa);
printf("\n");
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_DATA16 |
WDC_CAPABILITY_MODE;
sc->sc_wdcdev.PIO_cap = 4;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
sc->sc_wdcdev.DMA_cap = 2;
}
sc->sc_wdcdev.set_modes = opti_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
init_ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag,
OPTI_REG_INIT_CONTROL);
interface = PCI_INTERFACE(pa->pa_class);
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
if (channel == 1 &&
(init_ctrl & OPTI_INIT_CONTROL_CH2_DISABLE) != 0) {
printf("%s: %s channel ignored (disabled)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
continue;
}
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
pciide_pci_intr);
if (cp->hw_ok == 0)
continue;
pciide_map_compat_intr(pa, cp, channel, interface);
if (cp->hw_ok == 0)
continue;
opti_setup_channel(&cp->wdc_channel);
}
}
void
opti_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
int drive, spd;
int mode[2];
u_int8_t rv, mr;
/*
* The `Delay' and `Address Setup Time' fields of the
* Miscellaneous Register are always zero initially.
*/
mr = opti_read_config(chp, OPTI_REG_MISC) & ~OPTI_MISC_INDEX_MASK;
mr &= ~(OPTI_MISC_DELAY_MASK |
OPTI_MISC_ADDR_SETUP_MASK |
OPTI_MISC_INDEX_MASK);
/* Prime the control register before setting timing values */
opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_DISABLE);
/* Determine the clockrate of the PCIbus the chip is attached to */
spd = (int) opti_read_config(chp, OPTI_REG_STRAP);
spd &= OPTI_STRAP_PCI_SPEED_MASK;
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0) {
mode[drive] = -1;
continue;
}
if ((drvp->drive_flags & DRIVE_DMA)) {
/*
* Timings will be used for both PIO and DMA,
* so adjust DMA mode if needed
*/
if (drvp->PIO_mode > (drvp->DMA_mode + 2))
drvp->PIO_mode = drvp->DMA_mode + 2;
if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
drvp->DMA_mode = (drvp->PIO_mode > 2) ?
drvp->PIO_mode - 2 : 0;
if (drvp->DMA_mode == 0)
drvp->PIO_mode = 0;
mode[drive] = drvp->DMA_mode + 5;
} else
mode[drive] = drvp->PIO_mode;
if (drive && mode[0] >= 0 &&
(opti_tim_as[spd][mode[0]] != opti_tim_as[spd][mode[1]])) {
/*
* Can't have two drives using different values
* for `Address Setup Time'.
* Slow down the faster drive to compensate.
*/
int d = (opti_tim_as[spd][mode[0]] >
opti_tim_as[spd][mode[1]]) ? 0 : 1;
mode[d] = mode[1-d];
chp->ch_drive[d].PIO_mode = chp->ch_drive[1-d].PIO_mode;
chp->ch_drive[d].DMA_mode = 0;
chp->ch_drive[d].drive_flags &= ~DRIVE_DMA;
}
}
for (drive = 0; drive < 2; drive++) {
int m;
if ((m = mode[drive]) < 0)
continue;
/* Set the Address Setup Time and select appropriate index */
rv = opti_tim_as[spd][m] << OPTI_MISC_ADDR_SETUP_SHIFT;
rv |= OPTI_MISC_INDEX(drive);
opti_write_config(chp, OPTI_REG_MISC, mr | rv);
/* Set the pulse width and recovery timing parameters */
rv = opti_tim_cp[spd][m] << OPTI_PULSE_WIDTH_SHIFT;
rv |= opti_tim_rt[spd][m] << OPTI_RECOVERY_TIME_SHIFT;
opti_write_config(chp, OPTI_REG_READ_CYCLE_TIMING, rv);
opti_write_config(chp, OPTI_REG_WRITE_CYCLE_TIMING, rv);
/* Set the Enhanced Mode register appropriately */
rv = pciide_pci_read(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE);
rv &= ~OPTI_ENH_MODE_MASK(chp->channel, drive);
rv |= OPTI_ENH_MODE(chp->channel, drive, opti_tim_em[m]);
pciide_pci_write(sc->sc_pc, sc->sc_tag, OPTI_REG_ENH_MODE, rv);
}
/* Finally, enable the timings */
opti_write_config(chp, OPTI_REG_CONTROL, OPTI_CONTROL_ENABLE);
pciide_print_modes(cp);
}
#define ACARD_IS_850(sc) \
((sc)->sc_pp->ide_product == PCI_PRODUCT_ACARD_ATP850U)
void
acard_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
int i;
pcireg_t interface;
bus_size_t cmdsize, ctlsize;
if (pciide_chipen(sc, pa) == 0)
return;
/*
* when the chip is in native mode it identifies itself as a
* 'misc mass storage'. Fake interface in this case.
*/
if (PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
interface = PCI_INTERFACE(pa->pa_class);
} else {
interface = PCIIDE_INTERFACE_BUS_MASTER_DMA |
PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);
}
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
printf("\n");
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
WDC_CAPABILITY_MODE;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
}
sc->sc_wdcdev.PIO_cap = 4;
sc->sc_wdcdev.DMA_cap = 2;
sc->sc_wdcdev.UDMA_cap = ACARD_IS_850(sc) ? 2 : 4;
sc->sc_wdcdev.set_modes = acard_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = 2;
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
cp = &sc->pciide_channels[i];
if (pciide_chansetup(sc, i, interface) == 0)
continue;
if (interface & PCIIDE_INTERFACE_PCI(i)) {
cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
&ctlsize, pciide_pci_intr);
} else {
cp->hw_ok = pciide_mapregs_compat(pa, cp, i,
&cmdsize, &ctlsize);
}
if (cp->hw_ok == 0)
return;
cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
wdcattach(&cp->wdc_channel);
acard_setup_channel(&cp->wdc_channel);
}
if (!ACARD_IS_850(sc)) {
u_int32_t reg;
reg = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL);
reg &= ~ATP860_CTRL_INT;
pci_conf_write(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL, reg);
}
}
void
acard_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
int channel = chp->channel;
int drive;
u_int32_t idetime, udma_mode;
u_int32_t idedma_ctl;
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
if (ACARD_IS_850(sc)) {
idetime = 0;
udma_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP850_UDMA);
udma_mode &= ~ATP850_UDMA_MASK(channel);
} else {
idetime = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP860_IDETIME);
idetime &= ~ATP860_SETTIME_MASK(channel);
udma_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, ATP860_UDMA);
udma_mode &= ~ATP860_UDMA_MASK(channel);
/* check 80 pins cable */
if ((chp->ch_drive[0].drive_flags & DRIVE_UDMA) ||
(chp->ch_drive[1].drive_flags & DRIVE_UDMA)) {
if (pci_conf_read(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL)
& ATP860_CTRL_80P(chp->channel)) {
if (chp->ch_drive[0].UDMA_mode > 2)
chp->ch_drive[0].UDMA_mode = 2;
if (chp->ch_drive[1].UDMA_mode > 2)
chp->ch_drive[1].UDMA_mode = 2;
}
}
}
idedma_ctl = 0;
/* Per drive settings */
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
/* add timing values, setup DMA if needed */
if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
(drvp->drive_flags & DRIVE_UDMA)) {
/* use Ultra/DMA */
if (ACARD_IS_850(sc)) {
idetime |= ATP850_SETTIME(drive,
acard_act_udma[drvp->UDMA_mode],
acard_rec_udma[drvp->UDMA_mode]);
udma_mode |= ATP850_UDMA_MODE(channel, drive,
acard_udma_conf[drvp->UDMA_mode]);
} else {
idetime |= ATP860_SETTIME(channel, drive,
acard_act_udma[drvp->UDMA_mode],
acard_rec_udma[drvp->UDMA_mode]);
udma_mode |= ATP860_UDMA_MODE(channel, drive,
acard_udma_conf[drvp->UDMA_mode]);
}
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
} else if ((chp->wdc->cap & WDC_CAPABILITY_DMA) &&
(drvp->drive_flags & DRIVE_DMA)) {
/* use Multiword DMA */
drvp->drive_flags &= ~DRIVE_UDMA;
if (ACARD_IS_850(sc)) {
idetime |= ATP850_SETTIME(drive,
acard_act_dma[drvp->DMA_mode],
acard_rec_dma[drvp->DMA_mode]);
} else {
idetime |= ATP860_SETTIME(channel, drive,
acard_act_dma[drvp->DMA_mode],
acard_rec_dma[drvp->DMA_mode]);
}
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
} else {
/* PIO only */
drvp->drive_flags &= ~(DRIVE_UDMA | DRIVE_DMA);
if (ACARD_IS_850(sc)) {
idetime |= ATP850_SETTIME(drive,
acard_act_pio[drvp->PIO_mode],
acard_rec_pio[drvp->PIO_mode]);
} else {
idetime |= ATP860_SETTIME(channel, drive,
acard_act_pio[drvp->PIO_mode],
acard_rec_pio[drvp->PIO_mode]);
}
pci_conf_write(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL,
pci_conf_read(sc->sc_pc, sc->sc_tag, ATP8x0_CTRL)
| ATP8x0_CTRL_EN(channel));
}
}
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel, idedma_ctl);
}
pciide_print_modes(cp);
if (ACARD_IS_850(sc)) {
pci_conf_write(sc->sc_pc, sc->sc_tag,
ATP850_IDETIME(channel), idetime);
pci_conf_write(sc->sc_pc, sc->sc_tag, ATP850_UDMA, udma_mode);
} else {
pci_conf_write(sc->sc_pc, sc->sc_tag, ATP860_IDETIME, idetime);
pci_conf_write(sc->sc_pc, sc->sc_tag, ATP860_UDMA, udma_mode);
}
}
int
acard_pci_intr(arg)
void *arg;
{
struct pciide_softc *sc = arg;
struct pciide_channel *cp;
struct channel_softc *wdc_cp;
int rv = 0;
int dmastat, i, crv;
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
if ((dmastat & IDEDMA_CTL_INTR) == 0)
continue;
cp = &sc->pciide_channels[i];
wdc_cp = &cp->wdc_channel;
if ((wdc_cp->ch_flags & WDCF_IRQ_WAIT) == 0) {
(void)wdcintr(wdc_cp);
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * i, dmastat);
continue;
}
crv = wdcintr(wdc_cp);
if (crv == 0)
printf("%s:%d: bogus intr\n",
sc->sc_wdcdev.sc_dev.dv_xname, i);
else if (crv == 1)
rv = 1;
else if (rv == 0)
rv = crv;
}
return rv;
}
static int
sl82c105_bugchk(struct pci_attach_args *pa)
{
if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_WINBOND ||
PCI_PRODUCT(pa->pa_id) != PCI_PRODUCT_WINBOND_W83C553F_0)
return (0);
if (PCI_REVISION(pa->pa_class) <= 0x05)
return (1);
return (0);
}
void
sl82c105_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
bus_size_t cmdsize, ctlsize;
pcireg_t interface, idecr;
int channel;
if (pciide_chipen(sc, pa) == 0)
return;
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
/*
* Check to see if we're part of the Winbond 83c553 Southbridge.
* If so, we need to disable DMA on rev. <= 5 of that chip.
*/
if (pci_find_device(pa, sl82c105_bugchk)) {
printf(" but disabled due to 83c553 rev. <= 0x05");
sc->sc_dma_ok = 0;
} else
pciide_mapreg_dma(sc, pa);
printf("\n");
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_DATA16 |
WDC_CAPABILITY_MODE;
sc->sc_wdcdev.PIO_cap = 4;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
sc->sc_wdcdev.DMA_cap = 2;
}
sc->sc_wdcdev.set_modes = sl82c105_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
idecr = pci_conf_read(sc->sc_pc, sc->sc_tag, SYMPH_IDECSR);
interface = PCI_INTERFACE(pa->pa_class);
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
if ((channel == 0 && (idecr & IDECR_P0EN) == 0) ||
(channel == 1 && (idecr & IDECR_P1EN) == 0)) {
printf("%s: %s channel ignored (disabled)\n",
sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
continue;
}
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
pciide_pci_intr);
if (cp->hw_ok == 0)
continue;
pciide_map_compat_intr(pa, cp, channel, interface);
if (cp->hw_ok == 0)
continue;
sl82c105_setup_channel(&cp->wdc_channel);
}
}
void
sl82c105_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
int pxdx_reg, drive;
pcireg_t pxdx;
/* Set up DMA if needed. */
pciide_channel_dma_setup(cp);
for (drive = 0; drive < 2; drive++) {
pxdx_reg = ((chp->channel == 0) ? SYMPH_P0D0CR
: SYMPH_P1D0CR) + (drive * 4);
pxdx = pci_conf_read(sc->sc_pc, sc->sc_tag, pxdx_reg);
pxdx &= ~(PxDx_CMD_ON_MASK|PxDx_CMD_OFF_MASK);
pxdx &= ~(PxDx_PWEN|PxDx_RDYEN|PxDx_RAEN);
drvp = &chp->ch_drive[drive];
/* If no drive, skip. */
if ((drvp->drive_flags & DRIVE) == 0) {
pci_conf_write(sc->sc_pc, sc->sc_tag, pxdx_reg, pxdx);
continue;
}
if (drvp->drive_flags & DRIVE_DMA) {
/*
* Timings will be used for both PIO and DMA,
* so adjust DMA mode if needed.
*/
if (drvp->PIO_mode >= 3) {
if ((drvp->DMA_mode + 2) > drvp->PIO_mode)
drvp->DMA_mode = drvp->PIO_mode - 2;
if (drvp->DMA_mode < 1) {
/*
* Can't mix both PIO and DMA.
* Disable DMA.
*/
drvp->drive_flags &= ~DRIVE_DMA;
}
} else {
/*
* Can't mix both PIO and DMA. Disable
* DMA.
*/
drvp->drive_flags &= ~DRIVE_DMA;
}
}
if (drvp->drive_flags & DRIVE_DMA) {
/* Use multi-word DMA. */
pxdx |= symph_mw_dma_times[drvp->DMA_mode].cmd_on <<
PxDx_CMD_ON_SHIFT;
pxdx |= symph_mw_dma_times[drvp->DMA_mode].cmd_off;
} else {
pxdx |= symph_pio_times[drvp->PIO_mode].cmd_on <<
PxDx_CMD_ON_SHIFT;
pxdx |= symph_pio_times[drvp->PIO_mode].cmd_off;
}
/* XXX PxDx_PWEN? PxDx_RDYEN? PxDx_RAEN? */
/* ...and set the mode for this drive. */
pci_conf_write(sc->sc_pc, sc->sc_tag, pxdx_reg, pxdx);
}
pciide_print_modes(cp);
}
void
serverworks_chip_map(sc, pa)
struct pciide_softc *sc;
struct pci_attach_args *pa;
{
struct pciide_channel *cp;
pcireg_t interface = PCI_INTERFACE(pa->pa_class);
pcitag_t pcib_tag;
int channel;
bus_size_t cmdsize, ctlsize;
if (pciide_chipen(sc, pa) == 0)
return;
printf("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
printf("\n");
sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
WDC_CAPABILITY_MODE;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
sc->sc_wdcdev.cap |= WDC_CAPABILITY_IRQACK;
sc->sc_wdcdev.irqack = pciide_irqack;
}
sc->sc_wdcdev.PIO_cap = 4;
sc->sc_wdcdev.DMA_cap = 2;
switch (sc->sc_pp->ide_product) {
case PCI_PRODUCT_SERVERWORKS_OSB4_IDE:
sc->sc_wdcdev.UDMA_cap = 2;
break;
case PCI_PRODUCT_SERVERWORKS_CSB5_IDE:
if (PCI_REVISION(pa->pa_class) < 0x92)
sc->sc_wdcdev.UDMA_cap = 4;
else
sc->sc_wdcdev.UDMA_cap = 5;
break;
}
sc->sc_wdcdev.set_modes = serverworks_setup_channel;
sc->sc_wdcdev.channels = sc->wdc_chanarray;
sc->sc_wdcdev.nchannels = 2;
for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
serverworks_pci_intr);
if (cp->hw_ok == 0)
return;
pciide_map_compat_intr(pa, cp, channel, interface);
if (cp->hw_ok == 0)
return;
serverworks_setup_channel(&cp->wdc_channel);
}
pcib_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0);
pci_conf_write(pa->pa_pc, pcib_tag, 0x64,
(pci_conf_read(pa->pa_pc, pcib_tag, 0x64) & ~0x2000) | 0x4000);
}
void
serverworks_setup_channel(chp)
struct channel_softc *chp;
{
struct ata_drive_datas *drvp;
struct pciide_channel *cp = (struct pciide_channel*)chp;
struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
int channel = chp->channel;
int drive, unit;
u_int32_t pio_time, dma_time, pio_mode, udma_mode;
u_int32_t idedma_ctl;
static const u_int8_t pio_modes[5] = {0x5d, 0x47, 0x34, 0x22, 0x20};
static const u_int8_t dma_modes[3] = {0x77, 0x21, 0x20};
/* setup DMA if needed */
pciide_channel_dma_setup(cp);
pio_time = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x40);
dma_time = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x44);
pio_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x48);
udma_mode = pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54);
pio_time &= ~(0xffff << (16 * channel));
dma_time &= ~(0xffff << (16 * channel));
pio_mode &= ~(0xff << (8 * channel + 16));
udma_mode &= ~(0xff << (8 * channel + 16));
udma_mode &= ~(3 << (2 * channel));
idedma_ctl = 0;
/* Per drive settings */
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
unit = drive + 2 * channel;
/* add timing values, setup DMA if needed */
pio_time |= pio_modes[drvp->PIO_mode] << (8 * (unit^1));
pio_mode |= drvp->PIO_mode << (4 * unit + 16);
if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
(drvp->drive_flags & DRIVE_UDMA)) {
/* use Ultra/DMA, check for 80-pin cable */
if (drvp->UDMA_mode > 2 &&
(PCI_PRODUCT(pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_SUBSYS_ID_REG)) & (1 << (14 + channel))) == 0)
drvp->UDMA_mode = 2;
dma_time |= dma_modes[drvp->DMA_mode] << (8 * (unit^1));
udma_mode |= drvp->UDMA_mode << (4 * unit + 16);
udma_mode |= 1 << unit;
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
} else if ((chp->wdc->cap & WDC_CAPABILITY_DMA) &&
(drvp->drive_flags & DRIVE_DMA)) {
/* use Multiword DMA */
drvp->drive_flags &= ~DRIVE_UDMA;
dma_time |= dma_modes[drvp->DMA_mode] << (8 * (unit^1));
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
} else {
/* PIO only */
drvp->drive_flags &= ~(DRIVE_UDMA | DRIVE_DMA);
}
}
pci_conf_write(sc->sc_pc, sc->sc_tag, 0x40, pio_time);
pci_conf_write(sc->sc_pc, sc->sc_tag, 0x44, dma_time);
if (sc->sc_pp->ide_product != PCI_PRODUCT_SERVERWORKS_OSB4_IDE)
pci_conf_write(sc->sc_pc, sc->sc_tag, 0x48, pio_mode);
pci_conf_write(sc->sc_pc, sc->sc_tag, 0x54, udma_mode);
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel, idedma_ctl);
}
pciide_print_modes(cp);
}
int
serverworks_pci_intr(arg)
void *arg;
{
struct pciide_softc *sc = arg;
struct pciide_channel *cp;
struct channel_softc *wdc_cp;
int rv = 0;
int dmastat, i, crv;
for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
dmastat = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * i);
if ((dmastat & (IDEDMA_CTL_ACT | IDEDMA_CTL_INTR)) !=
IDEDMA_CTL_INTR)
continue;
cp = &sc->pciide_channels[i];
wdc_cp = &cp->wdc_channel;
crv = wdcintr(wdc_cp);
if (crv == 0) {
printf("%s:%d: bogus intr\n",
sc->sc_wdcdev.sc_dev.dv_xname, i);
bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
IDEDMA_CTL + IDEDMA_SCH_OFFSET * i, dmastat);
} else
rv = 1;
}
return rv;
}
Reference in New Issue View Git Blame Copy Permalink