NetBSD/sys/dev/sbus/bpp.c

502 lines
12 KiB
C

/* $NetBSD: bpp.c,v 1.4 2000/06/14 08:01:26 pk Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/ioctl.h>
#include <sys/fcntl.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/vnode.h>
#include <sys/poll.h>
#include <sys/select.h>
#include <sys/malloc.h>
#include <sys/proc.h>
#include <sys/signalvar.h>
#include <sys/conf.h>
#include <sys/errno.h>
#include <sys/device.h>
#include <machine/conf.h>
#include <machine/bus.h>
#include <machine/autoconf.h>
#include <dev/ic/lsi64854reg.h>
#include <dev/ic/lsi64854var.h>
#include <dev/sbus/sbusvar.h>
#include <dev/sbus/bppreg.h>
#define splbpp() spltty() /* XXX */
#if 0
struct bpp_param {
int bpp_dss; /* data setup to strobe */
int bpp_dsw; /* data strobe width */
int bpp_outputpins; /* Select/Autofeed/Init pins */
int bpp_inputpins; /* Error/Select/Paperout pins */
};
#endif
struct hwstate {
u_int16_t hw_hcr; /* Hardware config register */
u_int16_t hw_ocr; /* Operation config register */
u_int8_t hw_tcr; /* Transfer Control register */
u_int8_t hw_or; /* Output register */
u_int16_t hw_irq; /* IRQ; polarity bits only */
};
struct bpp_softc {
struct lsi64854_softc sc_lsi64854; /* base device */
struct sbusdev sc_sd; /* sbus device */
size_t sc_bufsz; /* temp buffer */
caddr_t sc_buf;
int sc_error; /* bottom-half error */
int sc_flags;
#define BPP_OPEN 0x01 /* Device is open */
#define BPP_XCLUDE 0x02 /* Exclusive-open mode */
#define BPP_ASYNC 0x04 /* Asynchronous I/O mode */
#define BPP_LOCKED 0x08 /* DMA in progress */
#define BPP_WANT 0x10 /* Waiting for DMA */
struct selinfo sc_rsel;
struct selinfo sc_wsel;
struct proc *sc_asyncproc; /* Process to notify if async */
/* Hardware state */
struct hwstate sc_hwdefault;
struct hwstate sc_hwcurrent;
};
static int bppmatch __P((struct device *, struct cfdata *, void *));
static void bppattach __P((struct device *, struct device *, void *));
static int bppintr __P((void *));
static void bpp_setparams __P((struct bpp_softc *, struct hwstate *));
struct cfattach bpp_ca = {
sizeof(struct bpp_softc), bppmatch, bppattach
};
extern struct cfdriver bpp_cd;
#define BPPUNIT(dev) (minor(dev))
int
bppmatch(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
struct sbus_attach_args *sa = aux;
return (strcmp("SUNW,bpp", sa->sa_name) == 0);
}
void
bppattach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct sbus_attach_args *sa = aux;
struct bpp_softc *dsc = (void *)self;
struct lsi64854_softc *sc = &dsc->sc_lsi64854;
int burst, sbusburst;
int node;
sc->sc_bustag = sa->sa_bustag;
sc->sc_dmatag = sa->sa_dmatag;
node = sa->sa_node;
/* Map device registers */
if (bus_space_map2(sa->sa_bustag,
sa->sa_slot,
sa->sa_offset,
sa->sa_size,
BUS_SPACE_MAP_LINEAR,
0, &sc->sc_regs) != 0) {
printf("%s: cannot map registers\n", self->dv_xname);
return;
}
/*
* Get transfer burst size from PROM and plug it into the
* controller registers. This is needed on the Sun4m; do
* others need it too?
*/
sbusburst = ((struct sbus_softc *)parent)->sc_burst;
if (sbusburst == 0)
sbusburst = SBUS_BURST_32 - 1; /* 1->16 */
burst = getpropint(node, "burst-sizes", -1);
if (burst == -1)
/* take SBus burst sizes */
burst = sbusburst;
/* Clamp at parent's burst sizes */
burst &= sbusburst;
sc->sc_burst = (burst & SBUS_BURST_32) ? 32 :
(burst & SBUS_BURST_16) ? 16 : 0;
/* Join the Sbus device family */
dsc->sc_sd.sd_reset = (void *)0;
sbus_establish(&dsc->sc_sd, self);
/* Initialize the DMA channel */
sc->sc_channel = L64854_CHANNEL_PP;
lsi64854_attach(sc);
/* Establish interrupt handler */
if (sa->sa_nintr) {
sc->sc_intrchain = bppintr;
sc->sc_intrchainarg = dsc;
(void)bus_intr_establish(sa->sa_bustag, sa->sa_pri, 0,
lsi64854_pp_intr, sc);
}
/* Allocate buffer XXX - should actually use dmamap_uio() */
dsc->sc_bufsz = 1024;
dsc->sc_buf = malloc(dsc->sc_bufsz, M_DEVBUF, M_NOWAIT);
/* XXX read default state */
{
bus_space_handle_t h = sc->sc_regs;
struct hwstate *hw = &dsc->sc_hwdefault;
hw->hw_hcr = bus_space_read_2(sc->sc_bustag, h, L64854_REG_HCR);
hw->hw_ocr = bus_space_read_2(sc->sc_bustag, h, L64854_REG_OCR);
hw->hw_tcr = bus_space_read_1(sc->sc_bustag, h, L64854_REG_TCR);
hw->hw_or = bus_space_read_1(sc->sc_bustag, h, L64854_REG_OR);
}
}
void
bpp_setparams(sc, hw)
struct bpp_softc *sc;
struct hwstate *hw;
{
u_int16_t irq;
bus_space_tag_t t = sc->sc_lsi64854.sc_bustag;
bus_space_handle_t h = sc->sc_lsi64854.sc_regs;
bus_space_write_2(t, h, L64854_REG_HCR, hw->hw_hcr);
bus_space_write_2(t, h, L64854_REG_OCR, hw->hw_ocr);
bus_space_write_1(t, h, L64854_REG_TCR, hw->hw_tcr);
bus_space_write_1(t, h, L64854_REG_OR, hw->hw_or);
/* Only change IRP settings in interrupt status register */
irq = bus_space_read_2(t, h, L64854_REG_ICR);
irq &= ~BPP_ALLIRP;
irq |= (hw->hw_irq & BPP_ALLIRP);
bus_space_write_2(t, h, L64854_REG_ICR, irq);
}
int
bppopen(dev, flags, mode, p)
dev_t dev;
int flags, mode;
struct proc *p;
{
int unit = BPPUNIT(dev);
struct bpp_softc *sc;
struct lsi64854_softc *lsi;
u_int16_t irq;
int s;
if (unit >= bpp_cd.cd_ndevs)
return (ENXIO);
sc = bpp_cd.cd_devs[unit];
if ((sc->sc_flags & (BPP_OPEN|BPP_XCLUDE)) == (BPP_OPEN|BPP_XCLUDE))
return (EBUSY);
lsi = &sc->sc_lsi64854;
/* Set default parameters */
sc->sc_hwcurrent = sc->sc_hwdefault;
s = splbpp();
bpp_setparams(sc, &sc->sc_hwdefault);
splx(s);
/* Enable interrupts */
irq = BPP_ALLEN;
irq |= sc->sc_hwdefault.hw_irq;
bus_space_write_2(lsi->sc_bustag, lsi->sc_regs, L64854_REG_ICR, irq);
return (0);
}
int
bppclose(dev, flags, mode, p)
dev_t dev;
int flags, mode;
struct proc *p;
{
struct bpp_softc *sc = bpp_cd.cd_devs[BPPUNIT(dev)];
struct lsi64854_softc *lsi = &sc->sc_lsi64854;
u_int16_t irq;
/* Turn off all interrupt enables */
irq = sc->sc_hwdefault.hw_irq | BPP_ALLIRQ;
irq &= ~BPP_ALLEN;
bus_space_write_2(lsi->sc_bustag, lsi->sc_regs, L64854_REG_ICR, irq);
sc->sc_asyncproc = NULL;
sc->sc_flags = 0;
return (0);
}
int
bppread(dev, uio, flags)
dev_t dev;
struct uio *uio;
int flags;
{
return (ENXIO);
}
int
bppwrite(dev, uio, flags)
dev_t dev;
struct uio *uio;
int flags;
{
struct bpp_softc *sc = bpp_cd.cd_devs[BPPUNIT(dev)];
struct lsi64854_softc *lsi = &sc->sc_lsi64854;
int error = 0;
int s;
/*
* Wait until the DMA engine is free.
*/
s = splbpp();
while ((sc->sc_flags & BPP_LOCKED) != 0) {
if ((flags & IO_NDELAY) != 0) {
splx(s);
return (EWOULDBLOCK);
}
sc->sc_flags |= BPP_WANT;
error = tsleep(sc->sc_buf, PZERO|PCATCH, "bppwrite", 0);
if (error != 0) {
splx(s);
return (error);
}
}
sc->sc_flags |= BPP_LOCKED;
splx(s);
/*
* Move data from user space into our private buffer
* and start DMA.
*/
while (uio->uio_resid > 0) {
caddr_t bp = sc->sc_buf;
size_t len = min(sc->sc_bufsz, uio->uio_resid);
if ((error = uiomove(bp, len, uio)) != 0)
break;
while (len > 0) {
u_int8_t tcr;
size_t size = len;
DMA_SETUP(lsi, &bp, &len, 0, &size);
/* Clear direction control bit */
tcr = bus_space_read_1(lsi->sc_bustag, lsi->sc_regs,
L64854_REG_TCR);
tcr &= ~BPP_TCR_DIR;
bus_space_write_1(lsi->sc_bustag, lsi->sc_regs,
L64854_REG_TCR, tcr);
/* Enable DMA */
s = splbpp();
DMA_GO(lsi);
error = tsleep(sc, PZERO|PCATCH, "bppdma", 0);
splx(s);
if (error != 0)
goto out;
/* Bail out if bottom half reported an error */
if ((error = sc->sc_error) != 0)
goto out;
len -= size;
}
}
out:
s = splbpp();
sc->sc_flags &= ~BPP_LOCKED;
if ((sc->sc_flags & BPP_WANT) != 0) {
sc->sc_flags &= ~BPP_WANT;
wakeup(sc->sc_buf);
}
splx(s);
return (error);
}
/* move to header: */
#define BPPIOCSPARAM _IOW('P', 0x1, struct hwstate)
#define BPPIOCGPARAM _IOR('P', 0x2, struct hwstate)
int
bppioctl(dev, cmd, data, flag, p)
dev_t dev;
u_long cmd;
caddr_t data;
int flag;
struct proc *p;
{
struct bpp_softc *sc = bpp_cd.cd_devs[BPPUNIT(dev)];
struct hwstate *hw, *chw;
int error = 0;
int s;
switch(cmd) {
case BPPIOCSPARAM:
chw = &sc->sc_hwcurrent;
hw = (struct hwstate *)data;
/*
* Extract and store user-settable bits.
*/
#define _bpp_set(reg,mask) do { \
chw->reg &= ~(mask); \
chw->reg |= (hw->reg & (mask)); \
} while (0)
_bpp_set(hw_hcr, BPP_HCR_DSS_MASK|BPP_HCR_DSW_MASK);
_bpp_set(hw_ocr, BPP_OCR_USER);
_bpp_set(hw_tcr, BPP_TCR_USER);
_bpp_set(hw_or, BPP_OR_USER);
_bpp_set(hw_irq, BPP_IRQ_USER);
#undef _bpp_set
/* Apply settings */
s = splbpp();
bpp_setparams(sc, chw);
splx(s);
break;
case BPPIOCGPARAM:
*((struct hwstate *)data) = sc->sc_hwcurrent;
break;
case TIOCEXCL:
s = splbpp();
sc->sc_flags |= BPP_XCLUDE;
splx(s);
break;
case TIOCNXCL:
s = splbpp();
sc->sc_flags &= ~BPP_XCLUDE;
splx(s);
break;
case FIOASYNC:
s = splbpp();
if (*(int *)data) {
if (sc->sc_asyncproc != NULL)
error = EBUSY;
else
sc->sc_asyncproc = p;
} else
sc->sc_asyncproc = NULL;
splx(s);
break;
default:
break;
}
return (error);
}
int
bpppoll(dev, events, p)
dev_t dev;
int events;
struct proc *p;
{
struct bpp_softc *sc = bpp_cd.cd_devs[BPPUNIT(dev)];
int revents = 0;
if (events & (POLLIN | POLLRDNORM)) {
/* read is not yet implemented */
}
if (events & (POLLOUT | POLLWRNORM)) {
if ((sc->sc_flags & BPP_LOCKED) == 0)
revents |= (POLLOUT | POLLWRNORM);
}
if (revents == 0) {
if (events & (POLLIN | POLLRDNORM))
selrecord(p, &sc->sc_rsel);
if (events & (POLLOUT | POLLWRNORM))
selrecord(p, &sc->sc_wsel);
}
return (revents);
}
int
bppintr(arg)
void *arg;
{
struct bpp_softc *sc = arg;
struct lsi64854_softc *lsi = &sc->sc_lsi64854;
u_int16_t irq;
irq = bus_space_read_2(lsi->sc_bustag, lsi->sc_regs, L64854_REG_ICR);
/* Ack all interrupts */
bus_space_write_2(lsi->sc_bustag, lsi->sc_regs, L64854_REG_ICR,
irq | BPP_ALLIRQ);
/* Did our device interrupt? */
if ((irq & BPP_ALLIRQ) == 0)
return (0);
if ((sc->sc_flags & BPP_LOCKED) != 0)
wakeup(sc);
else if ((sc->sc_flags & BPP_WANT) != 0) {
sc->sc_flags &= ~BPP_WANT;
wakeup(sc->sc_buf);
} else {
selwakeup(&sc->sc_wsel);
if (sc->sc_asyncproc != NULL)
psignal(sc->sc_asyncproc, SIGIO);
}
return (1);
}