NetBSD/usr.sbin/xntp/include/ntp.h

792 lines
28 KiB
C

/* $NetBSD: ntp.h,v 1.4 1998/08/12 14:11:51 christos Exp $ */
/*
* ntp.h - NTP definitions for the masses
*/
#include "ntp_types.h"
/*
* How to get signed characters. On machines where signed char works,
* use it. On machines where signed char doesn't work, char had better
* be signed.
*/
#ifdef NEED_S_CHAR_TYPEDEF
# if SIZEOF_SIGNED_CHAR
typedef signed char s_char;
# else
typedef char s_char;
# endif
/* XXX: Why is this sequent bit INSIDE this test? */
# ifdef sequent
# undef SO_RCVBUF
# undef SO_SNDBUF
# endif
#endif
#ifndef TRUE
# define TRUE 1
#endif /* TRUE */
#ifndef FALSE
# define FALSE 0
#endif /* FALSE */
/*
* NTP protocol parameters. See section 3.2.6 of the specification.
*/
#define NTP_VERSION ((u_char)3) /* current version number */
#define NTP_OLDVERSION ((u_char)1) /* oldest credible version */
#define NTP_PORT 123 /* included for sake of non-unix machines */
#define NTP_MAXSTRATUM ((u_char)15) /* max stratum, infinity a la Bellman-Ford */
#define NTP_MAXAGE 86400 /* one day in seconds */
#define NTP_MAXSKEW 1 /* 1 sec, skew after NTP_MAXAGE w/o updates */
#define NTP_SKEWINC 49170 /* skew increment for clock updates (l_f) */
#define NTP_SKEWFACTOR 16 /* approximation of factor for peer calcs */
#define NTP_MAXDISTANCE (1 * FP_SECOND) /* max. rootdelay for synchr. */
#define NTP_MINDPOLL 6 /* log2 default min poll interval (64 s) */
#define NTP_MAXDPOLL 10 /* log2 default max poll interval (~17 m) */
#define NTP_MINPOLL 4 /* log2 min poll interval (16 s) */
#define NTP_MAXPOLL 14 /* log2 max poll interval (~4.5 h) */
#define NTP_MINCLOCK 3 /* minimum for outlyer detection */
#define NTP_MAXCLOCK 10 /* maximum select list size */
#define NTP_MINDISPERSE (FP_SECOND / 100) /* min dispersion (u_fp 10 ms) */
#define NTP_MAXDISPERSE (FP_SECOND * 16) /* max dispersion (u_fp 16 s) */
#define NTP_DISPFACTOR 20 /* MAXDISPERSE as a shift (u_fp 16 s) */
#define NTP_WINDOW 8 /* reachability register size */
#define NTP_SHIFT 8 /* 8 suitable for crystal time base */
#define NTP_MAXKEY 65535 /* maximum authentication key number */
#define NTP_MAXD 3 /* log2 estimated error averaging factor */
/*
* Loop filter parameters. See section 5.1 of the specification.
*
* Note that these are appropriate for a crystal time base. If your
* system clock is line frequency controlled you should read the
* specification for appropriate modifications. Note that the
* loop filter code will have to change if you change CLOCK_MAX
* to be greater than or equal to 500 ms.
*
* Note these parameters have been rescaled for a time constant range from
* 0 through 10, with 2 corresoponding to the old time constant of 0.
*/
#define CLOCK_MINSTEP 900 /* step timeout (sec) */
#define CLOCK_DSCALE 20 /* skew reg. scale: unit is 2**-20 ~= 1 ppm */
#define CLOCK_FREQ 16 /* log2 frequency weight (65536) */
#define CLOCK_PHASE 6 /* log2 phase weight (64) */
#define CLOCK_LIMIT 30 /* time constant adjust threshold */
#define CLOCK_G 2 /* log2 frequency averaging factor */
#define CLOCK_MAXSEC 800 /* max update interval for pll */
#define CLOCK_MAX_FP 0x000020c5 /* max clock offset (s_fp 128 ms) */
#define CLOCK_MAX_F 0x20c49ba6 /* max clock offset (l_fp 128 ms) */
#define CLOCK_MAX_I 0x00000000 /* both fractional and integral parts */
#define CLOCK_WAYTOOBIG 1000 /* if clock 1000 sec off, forget it */
/*
* Event timers are actually implemented as a sorted queue of expiry
* times. The queue is slotted, with each slot holding timers which
* expire in a 2**(NTP_MINPOLL-1) (8) second period. The timers in
* each slot are sorted by increasing expiry time. The number of
* slots is 2**(NTP_MAXPOLL-(NTP_MINPOLL-1)), or 512, to cover a time
* period of 2**NTP_MAXPOLL (16384) seconds into the future before
* wrapping.
*/
#define EVENT_TIMEOUT 0 /* one second, that is */
struct event {
struct event *next; /* next in chain */
struct event *prev; /* previous in chain */
struct peer *peer; /* peer this counter belongs to */
void (*event_handler) P((struct peer *));
/* routine to call to handle event */
u_long event_time; /* expiry time of counter */
};
#define TIMER_SLOTTIME (1<<(NTP_MINPOLL-1))
#define TIMER_NSLOTS (1<<(NTP_MAXPOLL-(NTP_MINPOLL-1)))
#define TIMER_SLOT(t) (((t) >> (NTP_MINPOLL-1)) & (TIMER_NSLOTS-1))
#ifdef TIMERQUEUE_DEBUG
/* use the non-macro versions of these routines from xntpd/ntp_timer.c */
void TIMER_ENQUEUE(struct event *ea, struct event *iev);
void TIMER_INSERT(struct event *ea, struct event *iev);
void TIMER_DEQUEUE(struct event *ev);
#else /* TIMERQUEUE_DEBUG */
#ifndef SYS_WINNT
/*
* TIMER_ENQUEUE() puts stuff on the timer queue. It takes as
* arguments (ea), an array of event slots, and (iev), the event
* to be inserted. This one searches the hash bucket from the
* end, and is about optimum for the timing requirements of
* NTP peers.
*/
#define TIMER_ENQUEUE(ea, iev) \
do { \
register struct event *ev; \
\
ev = (ea)[TIMER_SLOT((iev)->event_time)].prev; \
while (ev->event_time > (iev)->event_time) \
ev = ev->prev; \
(iev)->prev = ev; \
(iev)->next = ev->next; \
(ev)->next->prev = (iev); \
(ev)->next = (iev); \
} while(0)
/*
* TIMER_INSERT() also puts stuff on the timer queue, but searches the
* bucket from the top. This is better for things that do very short
* time outs, like clock support.
*/
#define TIMER_INSERT(ea, iev) \
do { \
register struct event *ev; \
\
ev = (ea)[TIMER_SLOT((iev)->event_time)].next; \
while (ev->event_time != 0 && \
ev->event_time < (iev)->event_time) \
ev = ev->next; \
(iev)->next = ev; \
(iev)->prev = ev->prev; \
(ev)->prev->next = (iev); \
(ev)->prev = (iev); \
} while(0)
/*
* Remove an event from the queue.
*/
#define TIMER_DEQUEUE(ev) \
do { \
if ((ev)->next != 0) { \
(ev)->next->prev = (ev)->prev; \
(ev)->prev->next = (ev)->next; \
(ev)->next = (ev)->prev = 0; \
} \
} while (0)
#else /* SYS_WINNT */
/* Versions of TIMER_ENQUEUE, TIMER_INSERT, and TIMER_DEQUEUE for Windows NT */
#define TIMER_ENQUEUE(ea, iev) \
{ \
register struct event *ev; \
\
WaitForSingleObject(m_hListMutex,INFINITE); \
\
ev = (ea)[TIMER_SLOT((iev)->event_time)].prev; \
while (ev->event_time > (iev)->event_time) \
ev = ev->prev; \
(iev)->prev = ev; \
(iev)->next = ev->next; \
(ev)->next->prev = (iev); \
(ev)->next = (iev); \
\
ReleaseMutex(m_hListMutex); \
}
#define TIMER_INSERT(ea, iev) \
{ \
register struct event *ev; \
\
WaitForSingleObject(m_hListMutex,INFINITE); \
\
ev = (ea)[TIMER_SLOT((iev)->event_time)].next; \
while (ev->event_time != 0 && \
ev->event_time < (iev)->event_time) \
ev = ev->next; \
(iev)->next = ev; \
(iev)->prev = ev->prev; \
(ev)->prev->next = (iev); \
(ev)->prev = (iev); \
\
ReleaseMutex(m_hListMutex); \
}
#define TIMER_DEQUEUE(ev) \
{ \
\
WaitForSingleObject(m_hListMutex,INFINITE); \
\
if ((ev)->next != 0) { \
(ev)->next->prev = (ev)->prev; \
(ev)->prev->next = (ev)->next; \
(ev)->next = (ev)->prev = 0; \
} \
\
ReleaseMutex(m_hListMutex); \
}
#endif /* SYS_WINNT */
#endif /* TIMERQUEUE_DEBUG */
/*
* The interface structure is used to hold the addresses and socket
* numbers of each of the interfaces we are using.
*/
struct interface {
int fd; /* socket this is opened on */
int bfd; /* socket for receiving broadcasts */
struct sockaddr_in sin; /* interface address */
struct sockaddr_in bcast; /* broadcast address */
struct sockaddr_in mask; /* interface mask */
char name[8]; /* name of interface */
int flags; /* interface flags */
int last_ttl; /* last TTL specified */
volatile long received; /* number of incoming packets */
long sent; /* number of outgoing packets */
long notsent; /* number of send failures */
};
/*
* Flags for interfaces
*/
#define INT_BROADCAST 1 /* can broadcast out this interface */
#define INT_BCASTOPEN 2 /* broadcast socket is open */
#define INT_LOOPBACK 4 /* the loopback interface */
#define INT_MULTICAST 8 /* multicasting enabled */
/*
* Define flasher bits (tests 1 through 8 in packet procedure)
* These reveal the state at the last grumble from the peer and are
* most handy for diagnosing problems, even if not strictly a state
* variable in the spec. These are recorded in the peer structure.
*/
#define TEST1 0x01 /* duplicate packet received */
#define TEST2 0x02 /* bogus packet received */
#define TEST3 0x04 /* protocol unsynchronized */
#define TEST4 0x08 /* peer delay/dispersion bounds check */
#define TEST5 0x10 /* peer authentication failed */
#define TEST6 0x20 /* peer clock unsynchronized */
#define TEST7 0x40 /* peer stratum out of bounds */
#define TEST8 0x80 /* root delay/dispersion bounds check */
/*
* The peer structure. Holds state information relating to the guys
* we are peering with. Most of this stuff is from section 3.2 of the
* spec.
*/
struct peer {
struct peer *next;
struct peer *ass_next; /* link pointer in associd hash */
struct sockaddr_in srcadr; /* address of remote host */
struct interface *dstadr; /* pointer to address on local host */
struct refclockproc *procptr; /* pointer to reference clock sutuff */
u_char leap; /* leap indicator */
u_char hmode; /* association mode with this peer */
u_char pmode; /* peer's association mode */
u_char stratum; /* stratum of remote peer */
s_char precision; /* peer's clock precision */
u_char ppoll; /* peer poll interval */
u_char hpoll; /* local host poll interval */
u_char minpoll; /* min local host poll interval */
u_char maxpoll; /* max local host poll interval */
u_char version; /* version number */
u_char flags; /* peer flags */
u_char cast_flags; /* flags MDF_?CAST */
u_char flash; /* peer flashers (for maint) */
u_char refclktype; /* reference clock type */
u_char refclkunit; /* reference clock unit number */
u_char sstclktype; /* clock type for system status word */
s_fp rootdelay; /* distance from primary clock */
u_fp rootdispersion; /* peer clock dispersion */
u_int32 refid; /* peer reference ID */
l_fp reftime; /* time of peer's last update */
struct event event_timer; /* event queue entry */
u_int32 keyid; /* encription key ID */
u_int32 pkeyid; /* keyid used to encrypt last message */
u_short associd; /* association ID, a unique integer */
u_char ttl; /* time to live (multicast) */
/* **Start of clear-to-zero area.*** */
/* Everything that is cleared to zero goes below here */
u_char valid; /* valid counter */
#define clear_to_zero valid
u_char reach; /* reachability, NTP_WINDOW bits */
u_char unreach; /* unreachable count */
u_short filter_nextpt; /* index into filter shift register */
s_fp filter_delay[NTP_SHIFT]; /* delay part of shift register */
l_fp filter_offset[NTP_SHIFT]; /* offset part of shift register */
s_fp filter_soffset[NTP_SHIFT]; /* offset in s_fp format, for disp */
l_fp org; /* originate time stamp */
l_fp rec; /* receive time stamp */
l_fp xmt; /* transmit time stamp */
/* ***End of clear-to-zero area.*** */
/* Everything that is cleared to zero goes above here */
u_char filter_order[NTP_SHIFT]; /* we keep the filter sorted here */
#define end_clear_to_zero filter_order[0]
u_fp filter_error[NTP_SHIFT]; /* error part of shift register */
long update; /* base sys_clock for skew calc.s */
s_fp delay; /* filter estimated delay */
u_fp dispersion; /* filter estimated dispersion */
l_fp offset; /* filter estimated clock offset */
s_fp soffset; /* fp version of above */
u_fp synch; /* synch distance from above */
u_fp selectdisp; /* select dispersion */
s_fp estbdelay; /* broadcast offset */
/*
* statistic counters
*/
u_long timereset; /* time stat counters were reset */
u_long sent; /* number of updates sent */
u_long received; /* number of frames received */
u_long timereceived; /* last time a frame received */
u_long timereachable; /* last reachable/unreachable event */
u_long processed; /* processed by the protocol */
u_long badauth; /* bad credentials detected */
u_long bogusorg; /* rejected due to bogus origin */
u_long oldpkt; /* rejected as duplicate packet */
u_long seldisptoolarge; /* too much dispersion for selection */
u_long selbroken; /* broken NTP detected in selection */
u_long seltooold; /* too long since sync in selection */
u_char candidate; /* position after candidate selection */
u_char select; /* position at end of falseticker sel */
u_char was_sane; /* set to 1 if it passed sanity check */
u_char correct; /* set to 1 if it passed correctness check */
u_char last_event; /* set to code for last peer error */
u_char num_events; /* num. of events which have occurred */
};
/*
* Values for peer.leap, sys_leap
*/
#define LEAP_NOWARNING 0x0 /* normal, no leap second warning */
#define LEAP_ADDSECOND 0x1 /* last minute of day has 61 seconds */
#define LEAP_DELSECOND 0x2 /* last minute of day has 59 seconds */
#define LEAP_NOTINSYNC 0x3 /* overload, clock is free running */
/*
* Values for peer.mode
*/
#define MODE_UNSPEC 0 /* unspecified (probably old NTP version) */
#define MODE_ACTIVE 1 /* symmetric active */
#define MODE_PASSIVE 2 /* symmetric passive */
#define MODE_CLIENT 3 /* client mode */
#define MODE_SERVER 4 /* server mode */
#define MODE_BROADCAST 5 /* broadcast mode */
#define MODE_CONTROL 6 /* control mode packet */
#define MODE_PRIVATE 7 /* implementation defined function */
#define MODE_BCLIENT 8 /* a pseudo mode, used internally */
#define MODE_MCLIENT 9 /* multicast mode, used internally */
/*
* Values for peer.stratum, sys_stratum
*/
#define STRATUM_REFCLOCK ((u_char)0) /* stratum claimed by primary clock */
#define STRATUM_PRIMARY ((u_char)1) /* host has a primary clock */
#define STRATUM_INFIN ((u_char)NTP_MAXSTRATUM) /* infinity a la Bellman-Ford */
/* A stratum of 0 in the packet is mapped to 16 internally */
#define STRATUM_PKT_UNSPEC ((u_char)0) /* unspecified in packet */
#define STRATUM_UNSPEC ((u_char)(NTP_MAXSTRATUM+(u_char)1)) /* unspecified */
/*
* Values for peer.flags
*/
#define FLAG_CONFIG 0x1 /* association was configured */
#define FLAG_AUTHENABLE 0x2 /* this guy needs authentication */
#define FLAG_MCAST1 0x4 /* multicast client/server mode */
#define FLAG_MCAST2 0x8 /* multicast client mode */
#define FLAG_AUTHENTIC 0x10 /* last message was authentic */
#define FLAG_REFCLOCK 0x20 /* this is actually a reference clock */
#define FLAG_SYSPEER 0x40 /* this is one of the selected peers */
#define FLAG_PREFER 0x80 /* this is the preferred peer */
/*
* Definitions for the clear() routine. We use memset() to clear
* the parts of the peer structure which go to zero. These are
* used to calculate the start address and length of the area.
*/
#define CLEAR_TO_ZERO(p) ((char *)&((p)->clear_to_zero))
#define END_CLEAR_TO_ZERO(p) ((char *)&((p)->end_clear_to_zero))
#define LEN_CLEAR_TO_ZERO (END_CLEAR_TO_ZERO((struct peer *)0) \
- CLEAR_TO_ZERO((struct peer *)0))
/*
* Reference clock identifiers (for pps signal)
*/
#define PPSREFID (u_int32)"PPS " /* used when pps controls stratum>1 */
/*
* Reference clock types. Added as necessary.
*/
#define REFCLK_NONE 0 /* unknown or missing */
#define REFCLK_LOCALCLOCK 1 /* external (e.g., lockclock) */
#define REFCLK_GPS_TRAK 2 /* TRAK 8810 GPS Receiver */
#define REFCLK_WWV_PST 3 /* PST/Traconex 1020 WWV/H */
#define REFCLK_WWVB_SPECTRACOM 4 /* Spectracom 8170/Netclock WWVB */
#define REFCLK_TRUETIME 5 /* TrueTime (generic) Receivers */
#define REFCLK_IRIG_AUDIO 6 /* IRIG-B audio decoder */
#define REFCLK_CHU 7 /* scratchbuilt CHU (Canada) */
#define REFCLK_PARSE 8 /* generic driver (usually DCF77,GPS,MSF) */
#define REFCLK_GPS_MX4200 9 /* Magnavox MX4200 GPS */
#define REFCLK_GPS_AS2201 10 /* Austron 2201A GPS */
#define REFCLK_GPS_ARBITER 11 /* Arbiter 1088A/B/ GPS */
#define REFCLK_IRIG_TPRO 12 /* KSI/Odetics TPRO-S IRIG */
#define REFCLK_ATOM_LEITCH 13 /* Leitch CSD 5300 Master Clock */
#define REFCLK_MSF_EES 14 /* EES M201 MSF Receiver */
#define REFCLK_GPSTM_TRUE 15 /* OLD TrueTime GPS/TM-TMD Receiver */
#define REFCLK_IRIG_BANCOMM 16 /* Bancomm GPS/IRIG Interface */
#define REFCLK_GPS_DATUM 17 /* Datum Programmable Time System */
#define REFCLK_NIST_ACTS 18 /* NIST Auto Computer Time Service */
#define REFCLK_WWV_HEATH 19 /* Heath GC1000 WWV/WWVH Receiver */
#define REFCLK_GPS_NMEA 20 /* NMEA based GPS clock */
#define REFCLK_GPS_VME 21 /* TrueTime GPS-VME Interface */
#define REFCLK_ATOM_PPS 22 /* 1-PPS Clock Discipline */
#define REFCLK_PTB_ACTS 23 /* PTB Auto Computer Time Service */
#define REFCLK_USNO 24 /* Naval Observatory dialup */
#define REFCLK_GPS_HP 26 /* HP 58503A Time & Frequency Receiver */
#define REFCLK_ARCRON_MSF 27 /* ARCRON MSF radio clock. */
#define REFCLK_SHM 28 /* clock attached thru shared memory */
#define REFCLK_PALISADE 29 /* Trimble Navigation Palisade GPS */
#define REFCLK_ONCORE 30 /* Motorola UT Oncore GPS */
#define REFCLK_GPS_JUPITER 31 /* Rockwell Jupiter GPS receiver */
#define REFCLK_MAX 32 /* maximum index (room to expand) */
/*
* We tell reference clocks from real peers by giving the reference
* clocks an address of the form 127.127.t.u, where t is the type and
* u is the unit number. We define some of this here since we will need
* some sanity checks to make sure this address isn't interpretted as
* that of a normal peer.
*/
#define REFCLOCK_ADDR 0x7f7f0000 /* 127.127.0.0 */
#define REFCLOCK_MASK 0xffff0000 /* 255.255.0.0 */
#define ISREFCLOCKADR(srcadr) ((SRCADR(srcadr) & REFCLOCK_MASK) \
== REFCLOCK_ADDR)
/*
* Macro for checking for invalid addresses. This is really, really
* gross, but is needed so no one configures a host on net 127 now that
* we're encouraging it the the configuration file.
*/
#define LOOPBACKADR 0x7f000001
#define LOOPNETMASK 0xff000000
#define ISBADADR(srcadr) (((SRCADR(srcadr) & LOOPNETMASK) \
== (LOOPBACKADR & LOOPNETMASK)) \
&& (SRCADR(srcadr) != LOOPBACKADR))
/*
* Utilities for manipulating addresses and port numbers
*/
#define NSRCADR(src) ((src)->sin_addr.s_addr) /* address in net byte order */
#define NSRCPORT(src) ((src)->sin_port) /* port in net byte order */
#define SRCADR(src) (ntohl(NSRCADR((src)))) /* address in host byte order */
#define SRCPORT(src) (ntohs(NSRCPORT((src)))) /* host port */
/*
* NTP packet format. The mac field is optional. It isn't really
* an l_fp either, but for now declaring it that way is convenient.
* See Appendix A in the specification.
*
* Note that all u_fp and l_fp values arrive in network byte order
* and must be converted (except the mac, which isn't, really).
*/
struct pkt {
u_char li_vn_mode; /* contains leap indicator, version and mode */
u_char stratum; /* peer's stratum */
u_char ppoll; /* the peer polling interval */
s_char precision; /* peer clock precision */
s_fp rootdelay; /* distance to primary clock */
u_fp rootdispersion; /* clock dispersion */
u_int32 refid; /* reference clock ID */
l_fp reftime; /* time peer clock was last updated */
l_fp org; /* originate time stamp */
l_fp rec; /* receive time stamp */
l_fp xmt; /* transmit time stamp */
#define MIN_MAC_LEN (sizeof(u_int32) + 8) /* DES */
#define MAX_MAC_LEN (sizeof(u_int32) + 16) /* MD5 */
u_int32 keyid; /* key identification */
u_char mac[MAX_MAC_LEN-sizeof(u_int32)];/* message-authentication code */
/*l_fp mac;*/
};
/*
* Packets can come in two flavours, one with a mac and one without.
*/
#define LEN_PKT_NOMAC (sizeof(struct pkt) - MAX_MAC_LEN)
/*
* Minimum size of packet with a MAC: has to include at least a key number.
*/
#define LEN_PKT_MAC (LEN_PKT_NOMAC + sizeof(u_int32))
/*
* Stuff for extracting things from li_vn_mode
*/
#define PKT_MODE(li_vn_mode) ((u_char)((li_vn_mode) & 0x7))
#define PKT_VERSION(li_vn_mode) ((u_char)(((li_vn_mode) >> 3) & 0x7))
#define PKT_LEAP(li_vn_mode) ((u_char)(((li_vn_mode) >> 6) & 0x3))
/*
* Stuff for putting things back into li_vn_mode
*/
#define PKT_LI_VN_MODE(li, vn, md) \
((u_char)((((li) << 6) & 0xc0) | (((vn) << 3) & 0x38) | ((md) & 0x7)))
/*
* Dealing with stratum. 0 gets mapped to 16 incoming, and back to 0
* on output.
*/
#define PKT_TO_STRATUM(s) ((u_char)(((s) == (STRATUM_PKT_UNSPEC)) ?\
(STRATUM_UNSPEC) : (s)))
#define STRATUM_TO_PKT(s) ((u_char)(((s) == (STRATUM_UNSPEC)) ?\
(STRATUM_PKT_UNSPEC) : (s)))
/*
* Format of a recvbuf. These are used by the asynchronous receive
* routine to store incoming packets and related information.
*/
/*
* the maximum length NTP packet is a full length NTP control message with
* the maximum length message authenticator. I hate to hard-code 468 and 12,
* but only a few modules include ntp_control.h...
*/
#define RX_BUFF_SIZE (468+12+MAX_MAC_LEN)
struct recvbuf {
struct recvbuf *next; /* next buffer in chain */
union {
struct sockaddr_in X_recv_srcadr;
caddr_t X_recv_srcclock;
} X_from_where;
#define recv_srcadr X_from_where.X_recv_srcadr
#define recv_srcclock X_from_where.X_recv_srcclock
struct sockaddr_in srcadr; /* where packet came from */
struct interface *dstadr; /* interface datagram arrived thru */
int fd; /* fd on which it was received */
l_fp recv_time; /* time of arrival */
void (*receiver) P((struct recvbuf *)); /* routine to receive buffer */
int recv_length; /* number of octets received */
union {
struct pkt X_recv_pkt;
char X_recv_buffer[RX_BUFF_SIZE];
} recv_space;
#define recv_pkt recv_space.X_recv_pkt
#define recv_buffer recv_space.X_recv_buffer
};
/*
* Event codes. Used for reporting errors/events to the control module
*/
#define PEER_EVENT 0x80 /* this is a peer event */
#define EVNT_UNSPEC 0
#define EVNT_SYSRESTART 1
#define EVNT_SYSFAULT 2
#define EVNT_SYNCCHG 3
#define EVNT_PEERSTCHG 4
#define EVNT_CLOCKRESET 5
#define EVNT_BADDATETIM 6
#define EVNT_CLOCKEXCPT 7
#define EVNT_PEERIPERR (1|PEER_EVENT)
#define EVNT_PEERAUTH (2|PEER_EVENT)
#define EVNT_UNREACH (3|PEER_EVENT)
#define EVNT_REACH (4|PEER_EVENT)
#define EVNT_PEERCLOCK (5|PEER_EVENT)
/*
* Clock event codes
*/
#define CEVNT_NOMINAL 0
#define CEVNT_TIMEOUT 1
#define CEVNT_BADREPLY 2
#define CEVNT_FAULT 3
#define CEVNT_PROP 4
#define CEVNT_BADDATE 5
#define CEVNT_BADTIME 6
#define CEVNT_MAX CEVNT_BADTIME
/*
* Very misplaced value. Default port through which we send traps.
*/
#define TRAPPORT 18447
/*
* To speed lookups, peers are hashed by the low order bits of the remote
* IP address. These definitions relate to that.
*/
#define HASH_SIZE 32
#define HASH_MASK (HASH_SIZE-1)
#define HASH_ADDR(src) ((SRCADR((src))^(SRCADR((src))>>8)) & HASH_MASK)
/*
* The poll update procedure takes an extra argument which controls
* how a random perturbation is applied to peer.timer. The choice is
* to not randomize at all, to randomize only if we're going to update
* peer.timer, and to randomize no matter what (almost, the algorithm
* is that we apply the random value if it is less than the current
* timer count).
*/
#define POLL_NOTRANDOM 0 /* don't randomize */
#define POLL_RANDOMCHANGE 1 /* if you change, change randomly */
#define POLL_MAKERANDOM 2 /* randomize next interval */
/*
* How we randomize polls. The poll interval is a power of two.
* We chose a random value which is between 1/4 and 3/4 of the
* poll interval we would normally use and which is an even multiple
* of the EVENT_TIMEOUT. The random number routine, given an argument
* spread value of n, returns an integer between 0 and (1<<n)-1. This
* is shifted by EVENT_TIMEOUT and added to the base value.
*/
#define RANDOM_SPREAD(poll) ((poll) - (EVENT_TIMEOUT+1))
#define RANDOM_POLL(poll, rval) ((((rval)+1)<<EVENT_TIMEOUT) + (1<<((poll)-2)))
/*
* min, min3 and max. Makes it easier to transliterate the spec without
* thinking about it.
*/
#define min(a,b) (((a) < (b)) ? (a) : (b))
#define max(a,b) (((a) > (b)) ? (a) : (b))
#define min3(a,b,c) min(min((a),(b)), (c))
/*
* Configuration items. These are for the protocol module (proto_config())
*/
#define PROTO_BROADCLIENT 1
#define PROTO_PRECISION 2 /* (not used) */
#define PROTO_AUTHENTICATE 3
#define PROTO_BROADDELAY 4
#define PROTO_AUTHDELAY 5 /* (not used) */
#define PROTO_MULTICAST_ADD 6
#define PROTO_MULTICAST_DEL 7
#define PROTO_PLL 8
#define PROTO_PPS 9
#define PROTO_MONITOR 10
#define PROTO_FILEGEN 11
/*
* Configuration items for the loop filter
*/
#define LOOP_DRIFTCOMP 1 /* set frequency offset */
#define LOOP_PPSDELAY 2 /* set pps delay */
#define LOOP_PPSBAUD 3 /* set pps baud rate */
/*
* Configuration items for the stats printer
*/
#define STATS_FREQ_FILE 1 /* configure drift file */
#define STATS_STATSDIR 2 /* directory prefix for stats files */
#define STATS_PID_FILE 3 /* configure xntpd PID file */
#define MJD_1970 40587 /* MJD for 1 Jan 1970 */
/*
* Default parameters. We use these in the absence of something better.
*/
#define DEFPRECISION (-7) /* default precision (~10 ms) */
#define DEFBROADDELAY 0x00000100 /* default broadcast offset */
/* (~4 ms as s_fp) */
#define DEFAUTHDELAY 0x00080000 /* default authentication delay */
/* (~100 us as l_fp.l_f) */
#define INADDR_NTP 0xe0000101 /* NTP multicast address 224.0.1.1 */
/*
* Structure used optionally for monitoring when this is turned on.
*/
struct mon_data {
struct mon_data *hash_next; /* next structure in hash list */
struct mon_data *mru_next; /* next structure in MRU list */
struct mon_data *mru_prev; /* previous structure in MRU list */
struct mon_data *fifo_next; /* next structure in FIFO list */
struct mon_data *fifo_prev; /* previous structure in FIFO list */
u_long lastdrop; /* last time dropped due to RES_LIMIT*/
u_long lasttime; /* last time data updated */
u_long firsttime; /* time structure initialized */
u_long count; /* count we have seen */
u_int32 rmtadr; /* address of remote host */
struct interface *interface; /* interface on which this arrived */
u_short rmtport; /* remote port last came from */
u_char mode; /* mode of incoming packet */
u_char version; /* version of incoming packet */
u_char cast_flags; /* flags MDF_?CAST */
};
#define MDF_UCAST 1 /* unicast packet */
#define MDF_MCAST 2 /* multicast packet */
#define MDF_BCAST 4 /* broadcast packet */
#define MDF_LCAST 8 /* local packet */
/*
* Values used with mon_enabled to indicate reason for enabling monitoring
*/
#define MON_OFF 0x00 /* no monitoring */
#define MON_ON 0x01 /* monitoring explicitly enabled */
#define MON_RES 0x02 /* implicit monitoring for RES_LIMITED */
/*
* Structure used for restrictlist entries
*/
struct restrictlist {
struct restrictlist *next; /* link to next entry */
u_int32 addr; /* host address (host byte order) */
u_int32 mask; /* mask for address (host byte order) */
u_long count; /* number of packets matched */
u_short flags; /* accesslist flags */
u_short mflags; /* match flags */
};
/*
* Access flags
*/
#define RES_IGNORE 0x1 /* ignore if matched */
#define RES_DONTSERVE 0x2 /* don't give him any time */
#define RES_DONTTRUST 0x4 /* don't trust if matched */
#define RES_NOQUERY 0x8 /* don't allow queries if matched */
#define RES_NOMODIFY 0x10 /* don't allow him to modify server */
#define RES_NOPEER 0x20 /* don't allocate memory resources */
#define RES_NOTRAP 0x40 /* don't allow him to set traps */
#define RES_LPTRAP 0x80 /* traps set by him are low priority */
#define RES_LIMITED 0x100 /* limit per net number of clients */
#define RES_ALLFLAGS \
(RES_IGNORE|RES_DONTSERVE|RES_DONTTRUST|RES_NOQUERY\
|RES_NOMODIFY|RES_NOPEER|RES_NOTRAP|RES_LPTRAP|RES_LIMITED)
/*
* Match flags
*/
#define RESM_INTERFACE 0x1 /* this is an interface */
#define RESM_NTPONLY 0x2 /* match ntp port only */
/*
* Restriction configuration ops
*/
#define RESTRICT_FLAGS 1 /* add flags to restrict entry */
#define RESTRICT_UNFLAG 2 /* remove flags from restrict entry */
#define RESTRICT_REMOVE 3 /* remove a restrict entry */
/*
* Experimental alternate selection algorithm identifiers
*/
#define SELECT_1 1
#define SELECT_2 2
#define SELECT_3 3
#define SELECT_4 4
#define SELECT_5 5
/*
* Endpoint structure for the select algorithm
*/
struct endpoint {
l_fp val; /* offset of endpoint */
int type; /* interval entry/exit */
};