Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
92ca7a2bc8
NetBSD/sys/dev/ic/elinkxl.c
christos 49b8e36112 Clean up the C_ and S_ constants. We don't really need two sets of them. 
Also make the interrupt handler for older 3com cards look like the xl one.
I.e. don't ack the interrupt latch bit before checking if it is set.
At the same time, introduce constants for the watched interrupts, so that
we don't copy them all over the place.
2001-12-28 20:35:46 +00:00

1902 lines
47 KiB
C
Raw Blame History

/* $NetBSD: elinkxl.c,v 1.61 2001/12/28 20:35:46 christos Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Frank van der Linden.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: elinkxl.c,v 1.61 2001/12/28 20:35:46 christos Exp $");
#include "bpfilter.h"
#include "rnd.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/callout.h>
#include <sys/kernel.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/syslog.h>
#include <sys/select.h>
#include <sys/device.h>
#if NRND > 0
#include <sys/rnd.h>
#endif
#include <uvm/uvm_extern.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_ether.h>
#include <net/if_media.h>
#if NBPFILTER > 0
#include <net/bpf.h>
#include <net/bpfdesc.h>
#endif
#include <machine/cpu.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <machine/endian.h>
#include <dev/mii/miivar.h>
#include <dev/mii/mii.h>
#include <dev/mii/mii_bitbang.h>
#include <dev/ic/elink3reg.h>
/* #include <dev/ic/elink3var.h> */
#include <dev/ic/elinkxlreg.h>
#include <dev/ic/elinkxlvar.h>
#ifdef DEBUG
int exdebug = 0;
#endif
/* ifmedia callbacks */
int ex_media_chg __P((struct ifnet *ifp));
void ex_media_stat __P((struct ifnet *ifp, struct ifmediareq *req));
void ex_probe_media __P((struct ex_softc *));
void ex_set_filter __P((struct ex_softc *));
void ex_set_media __P((struct ex_softc *));
struct mbuf *ex_get __P((struct ex_softc *, int));
u_int16_t ex_read_eeprom __P((struct ex_softc *, int));
int ex_init __P((struct ifnet *));
void ex_read __P((struct ex_softc *));
void ex_reset __P((struct ex_softc *));
void ex_set_mc __P((struct ex_softc *));
void ex_getstats __P((struct ex_softc *));
void ex_printstats __P((struct ex_softc *));
void ex_tick __P((void *));
int ex_enable __P((struct ex_softc *));
void ex_disable __P((struct ex_softc *));
void ex_power __P((int, void *));
static int ex_eeprom_busy __P((struct ex_softc *));
static int ex_add_rxbuf __P((struct ex_softc *, struct ex_rxdesc *));
static void ex_init_txdescs __P((struct ex_softc *));
static void ex_shutdown __P((void *));
static void ex_start __P((struct ifnet *));
static void ex_txstat __P((struct ex_softc *));
int ex_mii_readreg __P((struct device *, int, int));
void ex_mii_writereg __P((struct device *, int, int, int));
void ex_mii_statchg __P((struct device *));
void ex_probemedia __P((struct ex_softc *));
/*
* Structure to map media-present bits in boards to ifmedia codes and
* printable media names. Used for table-driven ifmedia initialization.
*/
struct ex_media {
int exm_mpbit; /* media present bit */
const char *exm_name; /* name of medium */
int exm_ifmedia; /* ifmedia word for medium */
int exm_epmedia; /* ELINKMEDIA_* constant */
};
/*
* Media table for 3c90x chips. Note that chips with MII have no
* `native' media.
*/
struct ex_media ex_native_media[] = {
{ ELINK_PCI_10BASE_T, "10baseT", IFM_ETHER|IFM_10_T,
ELINKMEDIA_10BASE_T },
{ ELINK_PCI_10BASE_T, "10baseT-FDX", IFM_ETHER|IFM_10_T|IFM_FDX,
ELINKMEDIA_10BASE_T },
{ ELINK_PCI_AUI, "10base5", IFM_ETHER|IFM_10_5,
ELINKMEDIA_AUI },
{ ELINK_PCI_BNC, "10base2", IFM_ETHER|IFM_10_2,
ELINKMEDIA_10BASE_2 },
{ ELINK_PCI_100BASE_TX, "100baseTX", IFM_ETHER|IFM_100_TX,
ELINKMEDIA_100BASE_TX },
{ ELINK_PCI_100BASE_TX, "100baseTX-FDX",IFM_ETHER|IFM_100_TX|IFM_FDX,
ELINKMEDIA_100BASE_TX },
{ ELINK_PCI_100BASE_FX, "100baseFX", IFM_ETHER|IFM_100_FX,
ELINKMEDIA_100BASE_FX },
{ ELINK_PCI_100BASE_MII,"manual", IFM_ETHER|IFM_MANUAL,
ELINKMEDIA_MII },
{ ELINK_PCI_100BASE_T4, "100baseT4", IFM_ETHER|IFM_100_T4,
ELINKMEDIA_100BASE_T4 },
{ 0, NULL, 0,
0 },
};
/*
* MII bit-bang glue.
*/
u_int32_t ex_mii_bitbang_read __P((struct device *));
void ex_mii_bitbang_write __P((struct device *, u_int32_t));
const struct mii_bitbang_ops ex_mii_bitbang_ops = {
ex_mii_bitbang_read,
ex_mii_bitbang_write,
{
ELINK_PHY_DATA, /* MII_BIT_MDO */
ELINK_PHY_DATA, /* MII_BIT_MDI */
ELINK_PHY_CLK, /* MII_BIT_MDC */
ELINK_PHY_DIR, /* MII_BIT_DIR_HOST_PHY */
0, /* MII_BIT_DIR_PHY_HOST */
}
};
/*
* Back-end attach and configure.
*/
void
ex_config(sc)
struct ex_softc *sc;
{
struct ifnet *ifp;
u_int16_t val;
u_int8_t macaddr[ETHER_ADDR_LEN] = {0};
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int i, error, attach_stage;
callout_init(&sc->ex_mii_callout);
ex_reset(sc);
val = ex_read_eeprom(sc, EEPROM_OEM_ADDR0);
macaddr[0] = val >> 8;
macaddr[1] = val & 0xff;
val = ex_read_eeprom(sc, EEPROM_OEM_ADDR1);
macaddr[2] = val >> 8;
macaddr[3] = val & 0xff;
val = ex_read_eeprom(sc, EEPROM_OEM_ADDR2);
macaddr[4] = val >> 8;
macaddr[5] = val & 0xff;
printf("%s: MAC address %s\n", sc->sc_dev.dv_xname,
ether_sprintf(macaddr));
if (sc->ex_conf & (EX_CONF_INV_LED_POLARITY|EX_CONF_PHY_POWER)) {
GO_WINDOW(2);
val = bus_space_read_2(iot, ioh, ELINK_W2_RESET_OPTIONS);
if (sc->ex_conf & EX_CONF_INV_LED_POLARITY)
val |= ELINK_RESET_OPT_LEDPOLAR;
if (sc->ex_conf & EX_CONF_PHY_POWER)
val |= ELINK_RESET_OPT_PHYPOWER;
bus_space_write_2(iot, ioh, ELINK_W2_RESET_OPTIONS, val);
}
attach_stage = 0;
/*
* Allocate the upload descriptors, and create and load the DMA
* map for them.
*/
if ((error = bus_dmamem_alloc(sc->sc_dmat,
EX_NUPD * sizeof (struct ex_upd), PAGE_SIZE, 0, &sc->sc_useg, 1,
&sc->sc_urseg, BUS_DMA_NOWAIT)) != 0) {
printf("%s: can't allocate upload descriptors, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail;
}
attach_stage = 1;
if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_useg, sc->sc_urseg,
EX_NUPD * sizeof (struct ex_upd), (caddr_t *)&sc->sc_upd,
BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
printf("%s: can't map upload descriptors, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail;
}
attach_stage = 2;
if ((error = bus_dmamap_create(sc->sc_dmat,
EX_NUPD * sizeof (struct ex_upd), 1,
EX_NUPD * sizeof (struct ex_upd), 0, BUS_DMA_NOWAIT,
&sc->sc_upd_dmamap)) != 0) {
printf("%s: can't create upload desc. DMA map, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail;
}
attach_stage = 3;
if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_upd_dmamap,
sc->sc_upd, EX_NUPD * sizeof (struct ex_upd), NULL,
BUS_DMA_NOWAIT)) != 0) {
printf("%s: can't load upload desc. DMA map, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail;
}
attach_stage = 4;
/*
* Allocate the download descriptors, and create and load the DMA
* map for them.
*/
if ((error = bus_dmamem_alloc(sc->sc_dmat,
EX_NDPD * sizeof (struct ex_dpd), PAGE_SIZE, 0, &sc->sc_dseg, 1,
&sc->sc_drseg, BUS_DMA_NOWAIT)) != 0) {
printf("%s: can't allocate download descriptors, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail;
}
attach_stage = 5;
if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_dseg, sc->sc_drseg,
EX_NDPD * sizeof (struct ex_dpd), (caddr_t *)&sc->sc_dpd,
BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
printf("%s: can't map download descriptors, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail;
}
memset(sc->sc_dpd, 0, EX_NDPD * sizeof (struct ex_dpd));
attach_stage = 6;
if ((error = bus_dmamap_create(sc->sc_dmat,
EX_NDPD * sizeof (struct ex_dpd), 1,
EX_NDPD * sizeof (struct ex_dpd), 0, BUS_DMA_NOWAIT,
&sc->sc_dpd_dmamap)) != 0) {
printf("%s: can't create download desc. DMA map, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail;
}
attach_stage = 7;
if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dpd_dmamap,
sc->sc_dpd, EX_NDPD * sizeof (struct ex_dpd), NULL,
BUS_DMA_NOWAIT)) != 0) {
printf("%s: can't load download desc. DMA map, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail;
}
attach_stage = 8;
/*
* Create the transmit buffer DMA maps.
*/
for (i = 0; i < EX_NDPD; i++) {
if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
EX_NTFRAGS, MCLBYTES, 0, BUS_DMA_NOWAIT,
&sc->sc_tx_dmamaps[i])) != 0) {
printf("%s: can't create tx DMA map %d, error = %d\n",
sc->sc_dev.dv_xname, i, error);
goto fail;
}
}
attach_stage = 9;
/*
* Create the receive buffer DMA maps.
*/
for (i = 0; i < EX_NUPD; i++) {
if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
EX_NRFRAGS, MCLBYTES, 0, BUS_DMA_NOWAIT,
&sc->sc_rx_dmamaps[i])) != 0) {
printf("%s: can't create rx DMA map %d, error = %d\n",
sc->sc_dev.dv_xname, i, error);
goto fail;
}
}
attach_stage = 10;
/*
* Create ring of upload descriptors, only once. The DMA engine
* will loop over this when receiving packets, stalling if it
* hits an UPD with a finished receive.
*/
for (i = 0; i < EX_NUPD; i++) {
sc->sc_rxdescs[i].rx_dmamap = sc->sc_rx_dmamaps[i];
sc->sc_rxdescs[i].rx_upd = &sc->sc_upd[i];
sc->sc_upd[i].upd_frags[0].fr_len =
htole32((MCLBYTES - 2) | EX_FR_LAST);
if (ex_add_rxbuf(sc, &sc->sc_rxdescs[i]) != 0) {
printf("%s: can't allocate or map rx buffers\n",
sc->sc_dev.dv_xname);
goto fail;
}
}
bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap, 0,
EX_NUPD * sizeof (struct ex_upd),
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
ex_init_txdescs(sc);
attach_stage = 11;
GO_WINDOW(3);
val = bus_space_read_2(iot, ioh, ELINK_W3_RESET_OPTIONS);
if (val & ELINK_MEDIACAP_MII)
sc->ex_conf |= EX_CONF_MII;
ifp = &sc->sc_ethercom.ec_if;
/*
* Initialize our media structures and MII info. We'll
* probe the MII if we discover that we have one.
*/
sc->ex_mii.mii_ifp = ifp;
sc->ex_mii.mii_readreg = ex_mii_readreg;
sc->ex_mii.mii_writereg = ex_mii_writereg;
sc->ex_mii.mii_statchg = ex_mii_statchg;
ifmedia_init(&sc->ex_mii.mii_media, 0, ex_media_chg,
ex_media_stat);
if (sc->ex_conf & EX_CONF_MII) {
/*
* Find PHY, extract media information from it.
* First, select the right transceiver.
*/
u_int32_t icfg;
GO_WINDOW(3);
icfg = bus_space_read_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG);
icfg &= ~(CONFIG_XCVR_SEL << 16);
if (val & (ELINK_MEDIACAP_MII | ELINK_MEDIACAP_100BASET4))
icfg |= ELINKMEDIA_MII << (CONFIG_XCVR_SEL_SHIFT + 16);
if (val & ELINK_MEDIACAP_100BASETX)
icfg |= ELINKMEDIA_AUTO << (CONFIG_XCVR_SEL_SHIFT + 16);
if (val & ELINK_MEDIACAP_100BASEFX)
icfg |= ELINKMEDIA_100BASE_FX
<< (CONFIG_XCVR_SEL_SHIFT + 16);
bus_space_write_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG, icfg);
mii_attach(&sc->sc_dev, &sc->ex_mii, 0xffffffff,
MII_PHY_ANY, MII_OFFSET_ANY, 0);
if (LIST_FIRST(&sc->ex_mii.mii_phys) == NULL) {
ifmedia_add(&sc->ex_mii.mii_media, IFM_ETHER|IFM_NONE,
0, NULL);
ifmedia_set(&sc->ex_mii.mii_media, IFM_ETHER|IFM_NONE);
} else {
ifmedia_set(&sc->ex_mii.mii_media, IFM_ETHER|IFM_AUTO);
}
} else
ex_probemedia(sc);
strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
ifp->if_softc = sc;
ifp->if_start = ex_start;
ifp->if_ioctl = ex_ioctl;
ifp->if_watchdog = ex_watchdog;
ifp->if_init = ex_init;
ifp->if_stop = ex_stop;
ifp->if_flags =
IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_MULTICAST;
IFQ_SET_READY(&ifp->if_snd);
/*
* We can support 802.1Q VLAN-sized frames.
*/
sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU;
/*
* The 3c90xB has hardware IPv4/TCPv4/UDPv4 checksum support.
*/
if (sc->ex_conf & EX_CONF_90XB)
sc->sc_ethercom.ec_if.if_capabilities |= IFCAP_CSUM_IPv4 |
IFCAP_CSUM_TCPv4 | IFCAP_CSUM_UDPv4;
if_attach(ifp);
ether_ifattach(ifp, macaddr);
GO_WINDOW(1);
sc->tx_start_thresh = 20;
sc->tx_succ_ok = 0;
/* TODO: set queues to 0 */
#if NRND > 0
rnd_attach_source(&sc->rnd_source, sc->sc_dev.dv_xname,
RND_TYPE_NET, 0);
#endif
/* Establish callback to reset card when we reboot. */
sc->sc_sdhook = shutdownhook_establish(ex_shutdown, sc);
if (sc->sc_sdhook == NULL)
printf("%s: WARNING: unable to establish shutdown hook\n",
sc->sc_dev.dv_xname);
/* Add a suspend hook to make sure we come back up after a resume. */
sc->sc_powerhook = powerhook_establish(ex_power, sc);
if (sc->sc_powerhook == NULL)
printf("%s: WARNING: unable to establish power hook\n",
sc->sc_dev.dv_xname);
/* The attach is successful. */
sc->ex_flags |= EX_FLAGS_ATTACHED;
return;
fail:
/*
* Free any resources we've allocated during the failed attach
* attempt. Do this in reverse order and fall though.
*/
switch (attach_stage) {
case 11:
{
struct ex_rxdesc *rxd;
for (i = 0; i < EX_NUPD; i++) {
rxd = &sc->sc_rxdescs[i];
if (rxd->rx_mbhead != NULL) {
bus_dmamap_unload(sc->sc_dmat, rxd->rx_dmamap);
m_freem(rxd->rx_mbhead);
}
}
}
/* FALLTHROUGH */
case 10:
for (i = 0; i < EX_NUPD; i++)
bus_dmamap_destroy(sc->sc_dmat, sc->sc_rx_dmamaps[i]);
/* FALLTHROUGH */
case 9:
for (i = 0; i < EX_NDPD; i++)
bus_dmamap_destroy(sc->sc_dmat, sc->sc_tx_dmamaps[i]);
/* FALLTHROUGH */
case 8:
bus_dmamap_unload(sc->sc_dmat, sc->sc_dpd_dmamap);
/* FALLTHROUGH */
case 7:
bus_dmamap_destroy(sc->sc_dmat, sc->sc_dpd_dmamap);
/* FALLTHROUGH */
case 6:
bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_dpd,
EX_NDPD * sizeof (struct ex_dpd));
/* FALLTHROUGH */
case 5:
bus_dmamem_free(sc->sc_dmat, &sc->sc_dseg, sc->sc_drseg);
break;
case 4:
bus_dmamap_unload(sc->sc_dmat, sc->sc_upd_dmamap);
/* FALLTHROUGH */
case 3:
bus_dmamap_destroy(sc->sc_dmat, sc->sc_upd_dmamap);
/* FALLTHROUGH */
case 2:
bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_upd,
EX_NUPD * sizeof (struct ex_upd));
/* FALLTHROUGH */
case 1:
bus_dmamem_free(sc->sc_dmat, &sc->sc_useg, sc->sc_urseg);
break;
}
}
/*
* Find the media present on non-MII chips.
*/
void
ex_probemedia(sc)
struct ex_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct ifmedia *ifm = &sc->ex_mii.mii_media;
struct ex_media *exm;
u_int16_t config1, reset_options, default_media;
int defmedia = 0;
const char *sep = "", *defmedianame = NULL;
GO_WINDOW(3);
config1 = bus_space_read_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG + 2);
reset_options = bus_space_read_1(iot, ioh, ELINK_W3_RESET_OPTIONS);
GO_WINDOW(0);
default_media = (config1 & CONFIG_MEDIAMASK) >> CONFIG_MEDIAMASK_SHIFT;
printf("%s: ", sc->sc_dev.dv_xname);
/* Sanity check that there are any media! */
if ((reset_options & ELINK_PCI_MEDIAMASK) == 0) {
printf("no media present!\n");
ifmedia_add(ifm, IFM_ETHER|IFM_NONE, 0, NULL);
ifmedia_set(ifm, IFM_ETHER|IFM_NONE);
return;
}
#define PRINT(str) printf("%s%s", sep, str); sep = ", "
for (exm = ex_native_media; exm->exm_name != NULL; exm++) {
if (reset_options & exm->exm_mpbit) {
/*
* Default media is a little complicated. We
* support full-duplex which uses the same
* reset options bit.
*
* XXX Check EEPROM for default to FDX?
*/
if (exm->exm_epmedia == default_media) {
if ((exm->exm_ifmedia & IFM_FDX) == 0) {
defmedia = exm->exm_ifmedia;
defmedianame = exm->exm_name;
}
} else if (defmedia == 0) {
defmedia = exm->exm_ifmedia;
defmedianame = exm->exm_name;
}
ifmedia_add(ifm, exm->exm_ifmedia, exm->exm_epmedia,
NULL);
PRINT(exm->exm_name);
}
}
#undef PRINT
#ifdef DIAGNOSTIC
if (defmedia == 0)
panic("ex_probemedia: impossible");
#endif
printf(", default %s\n", defmedianame);
ifmedia_set(ifm, defmedia);
}
/*
* Bring device up.
*/
int
ex_init(ifp)
struct ifnet *ifp;
{
struct ex_softc *sc = ifp->if_softc;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int i;
int error = 0;
if ((error = ex_enable(sc)) != 0)
goto out;
ex_waitcmd(sc);
ex_stop(ifp, 0);
/*
* Set the station address and clear the station mask. The latter
* is needed for 90x cards, 0 is the default for 90xB cards.
*/
GO_WINDOW(2);
for (i = 0; i < ETHER_ADDR_LEN; i++) {
bus_space_write_1(iot, ioh, ELINK_W2_ADDR_0 + i,
LLADDR(ifp->if_sadl)[i]);
bus_space_write_1(iot, ioh, ELINK_W2_RECVMASK_0 + i, 0);
}
GO_WINDOW(3);
bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_RESET);
ex_waitcmd(sc);
bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_RESET);
ex_waitcmd(sc);
/*
* Disable reclaim threshold for 90xB, set free threshold to
* 6 * 256 = 1536 for 90x.
*/
if (sc->ex_conf & EX_CONF_90XB)
bus_space_write_2(iot, ioh, ELINK_COMMAND,
ELINK_TXRECLTHRESH | 255);
else
bus_space_write_1(iot, ioh, ELINK_TXFREETHRESH, 6);
bus_space_write_2(iot, ioh, ELINK_COMMAND,
SET_RX_EARLY_THRESH | ELINK_THRESH_DISABLE);
bus_space_write_4(iot, ioh, ELINK_DMACTRL,
bus_space_read_4(iot, ioh, ELINK_DMACTRL) | ELINK_DMAC_UPRXEAREN);
bus_space_write_2(iot, ioh, ELINK_COMMAND,
SET_RD_0_MASK | XL_WATCHED_INTERRUPTS);
bus_space_write_2(iot, ioh, ELINK_COMMAND,
SET_INTR_MASK | XL_WATCHED_INTERRUPTS);
bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | 0xff);
if (sc->intr_ack)
(* sc->intr_ack)(sc);
ex_set_media(sc);
ex_set_mc(sc);
bus_space_write_2(iot, ioh, ELINK_COMMAND, STATS_ENABLE);
bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_ENABLE);
bus_space_write_4(iot, ioh, ELINK_UPLISTPTR, sc->sc_upddma);
bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_ENABLE);
bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_UPUNSTALL);
if (sc->ex_conf & (EX_CONF_PHY_POWER | EX_CONF_INV_LED_POLARITY)) {
u_int16_t cbcard_config;
GO_WINDOW(2);
cbcard_config = bus_space_read_2(sc->sc_iot, sc->sc_ioh, 0x0c);
if (sc->ex_conf & EX_CONF_PHY_POWER) {
cbcard_config |= 0x4000; /* turn on PHY power */
}
if (sc->ex_conf & EX_CONF_INV_LED_POLARITY) {
cbcard_config |= 0x0010; /* invert LED polarity */
}
bus_space_write_2(sc->sc_iot, sc->sc_ioh, 0x0c, cbcard_config);
GO_WINDOW(3);
}
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
ex_start(ifp);
GO_WINDOW(1);
callout_reset(&sc->ex_mii_callout, hz, ex_tick, sc);
out:
if (error) {
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
ifp->if_timer = 0;
printf("%s: interface not running\n", sc->sc_dev.dv_xname);
}
return (error);
}
#define ex_mchash(addr) (ether_crc32_be((addr), ETHER_ADDR_LEN) & 0xff)
/*
* Set multicast receive filter. Also take care of promiscuous mode
* here (XXX).
*/
void
ex_set_mc(sc)
struct ex_softc *sc;
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct ethercom *ec = &sc->sc_ethercom;
struct ether_multi *enm;
struct ether_multistep estep;
int i;
u_int16_t mask = FIL_INDIVIDUAL | FIL_BRDCST;
if (ifp->if_flags & IFF_PROMISC)
mask |= FIL_PROMISC;
if (!(ifp->if_flags & IFF_MULTICAST))
goto out;
if (!(sc->ex_conf & EX_CONF_90XB) || ifp->if_flags & IFF_ALLMULTI) {
mask |= (ifp->if_flags & IFF_MULTICAST) ? FIL_MULTICAST : 0;
} else {
ETHER_FIRST_MULTI(estep, ec, enm);
while (enm != NULL) {
if (memcmp(enm->enm_addrlo, enm->enm_addrhi,
ETHER_ADDR_LEN) != 0)
goto out;
i = ex_mchash(enm->enm_addrlo);
bus_space_write_2(sc->sc_iot, sc->sc_ioh,
ELINK_COMMAND, ELINK_SETHASHFILBIT | i);
ETHER_NEXT_MULTI(estep, enm);
}
mask |= FIL_MULTIHASH;
}
out:
bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND,
SET_RX_FILTER | mask);
}
static void
ex_txstat(sc)
struct ex_softc *sc;
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int i;
/*
* We need to read+write TX_STATUS until we get a 0 status
* in order to turn off the interrupt flag.
*/
while ((i = bus_space_read_1(iot, ioh, ELINK_TXSTATUS)) & TXS_COMPLETE) {
bus_space_write_1(iot, ioh, ELINK_TXSTATUS, 0x0);
if (i & TXS_JABBER) {
++sc->sc_ethercom.ec_if.if_oerrors;
if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
printf("%s: jabber (%x)\n",
sc->sc_dev.dv_xname, i);
ex_init(ifp);
/* TODO: be more subtle here */
} else if (i & TXS_UNDERRUN) {
++sc->sc_ethercom.ec_if.if_oerrors;
if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
printf("%s: fifo underrun (%x) @%d\n",
sc->sc_dev.dv_xname, i,
sc->tx_start_thresh);
if (sc->tx_succ_ok < 100)
sc->tx_start_thresh = min(ETHER_MAX_LEN,
sc->tx_start_thresh + 20);
sc->tx_succ_ok = 0;
ex_init(ifp);
/* TODO: be more subtle here */
} else if (i & TXS_MAX_COLLISION) {
++sc->sc_ethercom.ec_if.if_collisions;
bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_ENABLE);
sc->sc_ethercom.ec_if.if_flags &= ~IFF_OACTIVE;
} else
sc->tx_succ_ok = (sc->tx_succ_ok+1) & 127;
}
}
int
ex_media_chg(ifp)
struct ifnet *ifp;
{
if (ifp->if_flags & IFF_UP)
ex_init(ifp);
return 0;
}
void
ex_set_media(sc)
struct ex_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_int32_t configreg;
if (((sc->ex_conf & EX_CONF_MII) &&
(sc->ex_mii.mii_media_active & IFM_FDX))
|| (!(sc->ex_conf & EX_CONF_MII) &&
(sc->ex_mii.mii_media.ifm_media & IFM_FDX))) {
bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL,
MAC_CONTROL_FDX);
} else {
bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, 0);
}
/*
* If the device has MII, select it, and then tell the
* PHY which media to use.
*/
if (sc->ex_conf & EX_CONF_MII) {
GO_WINDOW(3);
configreg = bus_space_read_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG);
configreg &= ~(CONFIG_MEDIAMASK << 16);
configreg |= (ELINKMEDIA_MII << (CONFIG_MEDIAMASK_SHIFT + 16));
bus_space_write_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG, configreg);
mii_mediachg(&sc->ex_mii);
return;
}
GO_WINDOW(4);
bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE, 0);
bus_space_write_2(iot, ioh, ELINK_COMMAND, STOP_TRANSCEIVER);
delay(800);
/*
* Now turn on the selected media/transceiver.
*/
switch (IFM_SUBTYPE(sc->ex_mii.mii_media.ifm_cur->ifm_media)) {
case IFM_10_T:
bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE,
JABBER_GUARD_ENABLE|LINKBEAT_ENABLE);
break;
case IFM_10_2:
bus_space_write_2(iot, ioh, ELINK_COMMAND, START_TRANSCEIVER);
DELAY(800);
break;
case IFM_100_TX:
case IFM_100_FX:
bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE,
LINKBEAT_ENABLE);
DELAY(800);
break;
case IFM_10_5:
bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE,
SQE_ENABLE);
DELAY(800);
break;
case IFM_MANUAL:
break;
case IFM_NONE:
return;
default:
panic("ex_set_media: impossible");
}
GO_WINDOW(3);
configreg = bus_space_read_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG);
configreg &= ~(CONFIG_MEDIAMASK << 16);
configreg |= (sc->ex_mii.mii_media.ifm_cur->ifm_data <<
(CONFIG_MEDIAMASK_SHIFT + 16));
bus_space_write_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG, configreg);
}
/*
* Get currently-selected media from card.
* (if_media callback, may be called before interface is brought up).
*/
void
ex_media_stat(ifp, req)
struct ifnet *ifp;
struct ifmediareq *req;
{
struct ex_softc *sc = ifp->if_softc;
if (sc->ex_conf & EX_CONF_MII) {
mii_pollstat(&sc->ex_mii);
req->ifm_status = sc->ex_mii.mii_media_status;
req->ifm_active = sc->ex_mii.mii_media_active;
} else {
GO_WINDOW(4);
req->ifm_status = IFM_AVALID;
req->ifm_active = sc->ex_mii.mii_media.ifm_cur->ifm_media;
if (bus_space_read_2(sc->sc_iot, sc->sc_ioh,
ELINK_W4_MEDIA_TYPE) & LINKBEAT_DETECT)
req->ifm_status |= IFM_ACTIVE;
GO_WINDOW(1);
}
}
/*
* Start outputting on the interface.
*/
static void
ex_start(ifp)
struct ifnet *ifp;
{
struct ex_softc *sc = ifp->if_softc;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
volatile struct ex_fraghdr *fr = NULL;
volatile struct ex_dpd *dpd = NULL, *prevdpd = NULL;
struct ex_txdesc *txp;
struct mbuf *mb_head;
bus_dmamap_t dmamap;
int offset, totlen, segment, error;
u_int32_t csum_flags;
if (sc->tx_head || sc->tx_free == NULL)
return;
txp = NULL;
/*
* We're finished if there is nothing more to add to the list or if
* we're all filled up with buffers to transmit.
*/
while (sc->tx_free != NULL) {
/*
* Grab a packet to transmit.
*/
IFQ_DEQUEUE(&ifp->if_snd, mb_head);
if (mb_head == NULL)
break;
/*
* Get pointer to next available tx desc.
*/
txp = sc->tx_free;
dmamap = txp->tx_dmamap;
/*
* Go through each of the mbufs in the chain and initialize
* the transmit buffer descriptors with the physical address
* and size of the mbuf.
*/
reload:
error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap,
mb_head, BUS_DMA_WRITE|BUS_DMA_NOWAIT);
switch (error) {
case 0:
/* Success. */
break;
case EFBIG:
{
struct mbuf *mn;
/*
* We ran out of segments. We have to recopy this
* mbuf chain first. Bail out if we can't get the
* new buffers.
*/
printf("%s: too many segments, ", sc->sc_dev.dv_xname);
MGETHDR(mn, M_DONTWAIT, MT_DATA);
if (mn == NULL) {
m_freem(mb_head);
printf("aborting\n");
goto out;
}
if (mb_head->m_pkthdr.len > MHLEN) {
MCLGET(mn, M_DONTWAIT);
if ((mn->m_flags & M_EXT) == 0) {
m_freem(mn);
m_freem(mb_head);
printf("aborting\n");
goto out;
}
}
m_copydata(mb_head, 0, mb_head->m_pkthdr.len,
mtod(mn, caddr_t));
mn->m_pkthdr.len = mn->m_len = mb_head->m_pkthdr.len;
m_freem(mb_head);
mb_head = mn;
printf("retrying\n");
goto reload;
}
default:
/*
* Some other problem; report it.
*/
printf("%s: can't load mbuf chain, error = %d\n",
sc->sc_dev.dv_xname, error);
m_freem(mb_head);
goto out;
}
/*
* remove our tx desc from freelist.
*/
sc->tx_free = txp->tx_next;
txp->tx_next = NULL;
fr = &txp->tx_dpd->dpd_frags[0];
totlen = 0;
for (segment = 0; segment < dmamap->dm_nsegs; segment++, fr++) {
fr->fr_addr = htole32(dmamap->dm_segs[segment].ds_addr);
fr->fr_len = htole32(dmamap->dm_segs[segment].ds_len);
totlen += dmamap->dm_segs[segment].ds_len;
}
fr--;
fr->fr_len |= htole32(EX_FR_LAST);
txp->tx_mbhead = mb_head;
bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize,
BUS_DMASYNC_PREWRITE);
dpd = txp->tx_dpd;
dpd->dpd_nextptr = 0;
dpd->dpd_fsh = htole32(totlen);
/* Byte-swap constants to compiler can optimize. */
if (sc->ex_conf & EX_CONF_90XB) {
csum_flags = 0;
if (mb_head->m_pkthdr.csum_flags & M_CSUM_IPv4)
csum_flags |= htole32(EX_DPD_IPCKSUM);
if (mb_head->m_pkthdr.csum_flags & M_CSUM_TCPv4)
csum_flags |= htole32(EX_DPD_TCPCKSUM);
else if (mb_head->m_pkthdr.csum_flags & M_CSUM_UDPv4)
csum_flags |= htole32(EX_DPD_UDPCKSUM);
dpd->dpd_fsh |= csum_flags;
} else {
KDASSERT((mb_head->m_pkthdr.csum_flags &
(M_CSUM_IPv4|M_CSUM_TCPv4|M_CSUM_UDPv4)) == 0);
}
bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap,
((caddr_t)dpd - (caddr_t)sc->sc_dpd),
sizeof (struct ex_dpd),
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
/*
* No need to stall the download engine, we know it's
* not busy right now.
*
* Fix up pointers in both the "soft" tx and the physical
* tx list.
*/
if (sc->tx_head != NULL) {
prevdpd = sc->tx_tail->tx_dpd;
offset = ((caddr_t)prevdpd - (caddr_t)sc->sc_dpd);
bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap,
offset, sizeof (struct ex_dpd),
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
prevdpd->dpd_nextptr = htole32(DPD_DMADDR(sc, txp));
bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap,
offset, sizeof (struct ex_dpd),
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
sc->tx_tail->tx_next = txp;
sc->tx_tail = txp;
} else {
sc->tx_tail = sc->tx_head = txp;
}
#if NBPFILTER > 0
/*
* Pass packet to bpf if there is a listener.
*/
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, mb_head);
#endif
}
out:
if (sc->tx_head) {
sc->tx_tail->tx_dpd->dpd_fsh |= htole32(EX_DPD_DNIND);
bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap,
((caddr_t)sc->tx_tail->tx_dpd - (caddr_t)sc->sc_dpd),
sizeof (struct ex_dpd),
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
ifp->if_flags |= IFF_OACTIVE;
bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_DNUNSTALL);
bus_space_write_4(iot, ioh, ELINK_DNLISTPTR,
DPD_DMADDR(sc, sc->tx_head));
/* trigger watchdog */
ifp->if_timer = 5;
}
}
int
ex_intr(arg)
void *arg;
{
struct ex_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_int16_t stat;
int ret = 0;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
if ((ifp->if_flags & IFF_RUNNING) == 0 ||
(sc->sc_dev.dv_flags & DVF_ACTIVE) == 0)
return (0);
for (;;) {
stat = bus_space_read_2(iot, ioh, ELINK_STATUS);
if ((stat & XL_WATCHED_INTERRUPTS) == 0) {
if ((stat & INTR_LATCH) == 0) {
#if 0
printf("%s: intr latch cleared\n",
sc->sc_dev.dv_xname);
#endif
break;
}
}
ret = 1;
/*
* Acknowledge interrupts.
*/
bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR |
(stat & (XL_WATCHED_INTERRUPTS | INTR_LATCH)));
if (sc->intr_ack)
(*sc->intr_ack)(sc);
if (stat & HOST_ERROR) {
printf("%s: adapter failure (%x)\n",
sc->sc_dev.dv_xname, stat);
ex_reset(sc);
ex_init(ifp);
return 1;
}
if (stat & TX_COMPLETE) {
ex_txstat(sc);
}
if (stat & UPD_STATS) {
ex_getstats(sc);
}
if (stat & DN_COMPLETE) {
struct ex_txdesc *txp, *ptxp = NULL;
bus_dmamap_t txmap;
/* reset watchdog timer, was set in ex_start() */
ifp->if_timer = 0;
for (txp = sc->tx_head; txp != NULL;
txp = txp->tx_next) {
bus_dmamap_sync(sc->sc_dmat,
sc->sc_dpd_dmamap,
(caddr_t)txp->tx_dpd - (caddr_t)sc->sc_dpd,
sizeof (struct ex_dpd),
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
if (txp->tx_mbhead != NULL) {
txmap = txp->tx_dmamap;
bus_dmamap_sync(sc->sc_dmat, txmap,
0, txmap->dm_mapsize,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, txmap);
m_freem(txp->tx_mbhead);
txp->tx_mbhead = NULL;
}
ptxp = txp;
}
/*
* Move finished tx buffers back to the tx free list.
*/
if (sc->tx_free) {
sc->tx_ftail->tx_next = sc->tx_head;
sc->tx_ftail = ptxp;
} else
sc->tx_ftail = sc->tx_free = sc->tx_head;
sc->tx_head = sc->tx_tail = NULL;
ifp->if_flags &= ~IFF_OACTIVE;
}
if (stat & UP_COMPLETE) {
struct ex_rxdesc *rxd;
struct mbuf *m;
struct ex_upd *upd;
bus_dmamap_t rxmap;
u_int32_t pktstat;
rcvloop:
rxd = sc->rx_head;
rxmap = rxd->rx_dmamap;
m = rxd->rx_mbhead;
upd = rxd->rx_upd;
bus_dmamap_sync(sc->sc_dmat, rxmap, 0,
rxmap->dm_mapsize,
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap,
((caddr_t)upd - (caddr_t)sc->sc_upd),
sizeof (struct ex_upd),
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
pktstat = le32toh(upd->upd_pktstatus);
if (pktstat & EX_UPD_COMPLETE) {
/*
* Remove first packet from the chain.
*/
sc->rx_head = rxd->rx_next;
rxd->rx_next = NULL;
/*
* Add a new buffer to the receive chain.
* If this fails, the old buffer is recycled
* instead.
*/
if (ex_add_rxbuf(sc, rxd) == 0) {
u_int16_t total_len;
if (pktstat &
((sc->sc_ethercom.ec_capenable &
ETHERCAP_VLAN_MTU) ?
EX_UPD_ERR_VLAN : EX_UPD_ERR)) {
ifp->if_ierrors++;
m_freem(m);
goto rcvloop;
}
total_len = pktstat & EX_UPD_PKTLENMASK;
if (total_len <
sizeof(struct ether_header)) {
m_freem(m);
goto rcvloop;
}
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = m->m_len = total_len;
#if NBPFILTER > 0
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m);
#endif
/*
* Set the incoming checksum information for the packet.
*/
if ((sc->ex_conf & EX_CONF_90XB) != 0 &&
(pktstat & EX_UPD_IPCHECKED) != 0) {
m->m_pkthdr.csum_flags |= M_CSUM_IPv4;
if (pktstat & EX_UPD_IPCKSUMERR)
m->m_pkthdr.csum_flags |= M_CSUM_IPv4_BAD;
if (pktstat & EX_UPD_TCPCHECKED) {
m->m_pkthdr.csum_flags |= M_CSUM_TCPv4;
if (pktstat & EX_UPD_TCPCKSUMERR)
m->m_pkthdr.csum_flags |=
M_CSUM_TCP_UDP_BAD;
} else if (pktstat & EX_UPD_UDPCHECKED) {
m->m_pkthdr.csum_flags |= M_CSUM_UDPv4;
if (pktstat & EX_UPD_UDPCKSUMERR)
m->m_pkthdr.csum_flags |=
M_CSUM_TCP_UDP_BAD;
}
}
(*ifp->if_input)(ifp, m);
}
goto rcvloop;
}
/*
* Just in case we filled up all UPDs and the DMA engine
* stalled. We could be more subtle about this.
*/
if (bus_space_read_4(iot, ioh, ELINK_UPLISTPTR) == 0) {
printf("%s: uplistptr was 0\n",
sc->sc_dev.dv_xname);
ex_init(ifp);
} else if (bus_space_read_4(iot, ioh, ELINK_UPPKTSTATUS)
& 0x2000) {
printf("%s: receive stalled\n",
sc->sc_dev.dv_xname);
bus_space_write_2(iot, ioh, ELINK_COMMAND,
ELINK_UPUNSTALL);
}
}
}
/* no more interrupts */
if (ret && IFQ_IS_EMPTY(&ifp->if_snd) == 0)
ex_start(ifp);
return ret;
}
int
ex_ioctl(ifp, cmd, data)
struct ifnet *ifp;
u_long cmd;
caddr_t data;
{
struct ex_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *)data;
int s, error;
s = splnet();
switch (cmd) {
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
error = ifmedia_ioctl(ifp, ifr, &sc->ex_mii.mii_media, cmd);
break;
default:
error = ether_ioctl(ifp, cmd, data);
if (error == ENETRESET) {
if (sc->enabled) {
/*
* Multicast list has changed; set the hardware filter
* accordingly.
*/
ex_set_mc(sc);
}
error = 0;
}
break;
}
splx(s);
return (error);
}
void
ex_getstats(sc)
struct ex_softc *sc;
{
bus_space_handle_t ioh = sc->sc_ioh;
bus_space_tag_t iot = sc->sc_iot;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
u_int8_t upperok;
GO_WINDOW(6);
upperok = bus_space_read_1(iot, ioh, UPPER_FRAMES_OK);
ifp->if_ipackets += bus_space_read_1(iot, ioh, RX_FRAMES_OK);
ifp->if_ipackets += (upperok & 0x03) << 8;
ifp->if_opackets += bus_space_read_1(iot, ioh, TX_FRAMES_OK);
ifp->if_opackets += (upperok & 0x30) << 4;
ifp->if_ierrors += bus_space_read_1(iot, ioh, RX_OVERRUNS);
ifp->if_collisions += bus_space_read_1(iot, ioh, TX_COLLISIONS);
/*
* There seems to be no way to get the exact number of collisions,
* this is the number that occurred at the very least.
*/
ifp->if_collisions += 2 * bus_space_read_1(iot, ioh,
TX_AFTER_X_COLLISIONS);
ifp->if_ibytes += bus_space_read_2(iot, ioh, RX_TOTAL_OK);
ifp->if_obytes += bus_space_read_2(iot, ioh, TX_TOTAL_OK);
/*
* Clear the following to avoid stats overflow interrupts
*/
bus_space_read_1(iot, ioh, TX_DEFERRALS);
bus_space_read_1(iot, ioh, TX_AFTER_1_COLLISION);
bus_space_read_1(iot, ioh, TX_NO_SQE);
bus_space_read_1(iot, ioh, TX_CD_LOST);
GO_WINDOW(4);
bus_space_read_1(iot, ioh, ELINK_W4_BADSSD);
upperok = bus_space_read_1(iot, ioh, ELINK_W4_UBYTESOK);
ifp->if_ibytes += (upperok & 0x0f) << 16;
ifp->if_obytes += (upperok & 0xf0) << 12;
GO_WINDOW(1);
}
void
ex_printstats(sc)
struct ex_softc *sc;
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
ex_getstats(sc);
printf("in %llu out %llu ierror %llu oerror %llu ibytes %llu obytes "
"%llu\n", (unsigned long long)ifp->if_ipackets,
(unsigned long long)ifp->if_opackets,
(unsigned long long)ifp->if_ierrors,
(unsigned long long)ifp->if_oerrors,
(unsigned long long)ifp->if_ibytes,
(unsigned long long)ifp->if_obytes);
}
void
ex_tick(arg)
void *arg;
{
struct ex_softc *sc = arg;
int s;
if ((sc->sc_dev.dv_flags & DVF_ACTIVE) == 0)
return;
s = splnet();
if (sc->ex_conf & EX_CONF_MII)
mii_tick(&sc->ex_mii);
if (!(bus_space_read_2((sc)->sc_iot, (sc)->sc_ioh, ELINK_STATUS)
& COMMAND_IN_PROGRESS))
ex_getstats(sc);
splx(s);
callout_reset(&sc->ex_mii_callout, hz, ex_tick, sc);
}
void
ex_reset(sc)
struct ex_softc *sc;
{
u_int16_t val = GLOBAL_RESET;
if (sc->ex_conf & EX_CONF_RESETHACK)
val |= 0x10;
bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND, val);
/*
* XXX apparently the command in progress bit can't be trusted
* during a reset, so we just always wait this long. Fortunately
* we normally only reset the chip during autoconfig.
*/
delay(100000);
ex_waitcmd(sc);
}
void
ex_watchdog(ifp)
struct ifnet *ifp;
{
struct ex_softc *sc = ifp->if_softc;
log(LOG_ERR, "%s: device timeout\n", sc->sc_dev.dv_xname);
++sc->sc_ethercom.ec_if.if_oerrors;
ex_reset(sc);
ex_init(ifp);
}
void
ex_stop(ifp, disable)
struct ifnet *ifp;
int disable;
{
struct ex_softc *sc = ifp->if_softc;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct ex_txdesc *tx;
struct ex_rxdesc *rx;
int i;
bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_DISABLE);
bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_DISABLE);
bus_space_write_2(iot, ioh, ELINK_COMMAND, STOP_TRANSCEIVER);
for (tx = sc->tx_head ; tx != NULL; tx = tx->tx_next) {
if (tx->tx_mbhead == NULL)
continue;
m_freem(tx->tx_mbhead);
tx->tx_mbhead = NULL;
bus_dmamap_unload(sc->sc_dmat, tx->tx_dmamap);
tx->tx_dpd->dpd_fsh = tx->tx_dpd->dpd_nextptr = 0;
bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap,
((caddr_t)tx->tx_dpd - (caddr_t)sc->sc_dpd),
sizeof (struct ex_dpd),
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
}
sc->tx_tail = sc->tx_head = NULL;
ex_init_txdescs(sc);
sc->rx_tail = sc->rx_head = 0;
for (i = 0; i < EX_NUPD; i++) {
rx = &sc->sc_rxdescs[i];
if (rx->rx_mbhead != NULL) {
bus_dmamap_unload(sc->sc_dmat, rx->rx_dmamap);
m_freem(rx->rx_mbhead);
rx->rx_mbhead = NULL;
}
ex_add_rxbuf(sc, rx);
}
bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | INTR_LATCH);
callout_stop(&sc->ex_mii_callout);
if (sc->ex_conf & EX_CONF_MII)
mii_down(&sc->ex_mii);
if (disable)
ex_disable(sc);
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
ifp->if_timer = 0;
}
static void
ex_init_txdescs(sc)
struct ex_softc *sc;
{
int i;
for (i = 0; i < EX_NDPD; i++) {
sc->sc_txdescs[i].tx_dmamap = sc->sc_tx_dmamaps[i];
sc->sc_txdescs[i].tx_dpd = &sc->sc_dpd[i];
if (i < EX_NDPD - 1)
sc->sc_txdescs[i].tx_next = &sc->sc_txdescs[i + 1];
else
sc->sc_txdescs[i].tx_next = NULL;
}
sc->tx_free = &sc->sc_txdescs[0];
sc->tx_ftail = &sc->sc_txdescs[EX_NDPD-1];
}
int
ex_activate(self, act)
struct device *self;
enum devact act;
{
struct ex_softc *sc = (void *) self;
int s, error = 0;
s = splnet();
switch (act) {
case DVACT_ACTIVATE:
error = EOPNOTSUPP;
break;
case DVACT_DEACTIVATE:
if (sc->ex_conf & EX_CONF_MII)
mii_activate(&sc->ex_mii, act, MII_PHY_ANY,
MII_OFFSET_ANY);
if_deactivate(&sc->sc_ethercom.ec_if);
break;
}
splx(s);
return (error);
}
int
ex_detach(sc)
struct ex_softc *sc;
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct ex_rxdesc *rxd;
int i;
/* Succeed now if there's no work to do. */
if ((sc->ex_flags & EX_FLAGS_ATTACHED) == 0)
return (0);
/* Unhook our tick handler. */
callout_stop(&sc->ex_mii_callout);
if (sc->ex_conf & EX_CONF_MII) {
/* Detach all PHYs */
mii_detach(&sc->ex_mii, MII_PHY_ANY, MII_OFFSET_ANY);
}
/* Delete all remaining media. */
ifmedia_delete_instance(&sc->ex_mii.mii_media, IFM_INST_ANY);
#if NRND > 0
rnd_detach_source(&sc->rnd_source);
#endif
ether_ifdetach(ifp);
if_detach(ifp);
for (i = 0; i < EX_NUPD; i++) {
rxd = &sc->sc_rxdescs[i];
if (rxd->rx_mbhead != NULL) {
bus_dmamap_unload(sc->sc_dmat, rxd->rx_dmamap);
m_freem(rxd->rx_mbhead);
rxd->rx_mbhead = NULL;
}
}
for (i = 0; i < EX_NUPD; i++)
bus_dmamap_destroy(sc->sc_dmat, sc->sc_rx_dmamaps[i]);
for (i = 0; i < EX_NDPD; i++)
bus_dmamap_destroy(sc->sc_dmat, sc->sc_tx_dmamaps[i]);
bus_dmamap_unload(sc->sc_dmat, sc->sc_dpd_dmamap);
bus_dmamap_destroy(sc->sc_dmat, sc->sc_dpd_dmamap);
bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_dpd,
EX_NDPD * sizeof (struct ex_dpd));
bus_dmamem_free(sc->sc_dmat, &sc->sc_dseg, sc->sc_drseg);
bus_dmamap_unload(sc->sc_dmat, sc->sc_upd_dmamap);
bus_dmamap_destroy(sc->sc_dmat, sc->sc_upd_dmamap);
bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_upd,
EX_NUPD * sizeof (struct ex_upd));
bus_dmamem_free(sc->sc_dmat, &sc->sc_useg, sc->sc_urseg);
shutdownhook_disestablish(sc->sc_sdhook);
powerhook_disestablish(sc->sc_powerhook);
return (0);
}
/*
* Before reboots, reset card completely.
*/
static void
ex_shutdown(arg)
void *arg;
{
struct ex_softc *sc = arg;
ex_stop(&sc->sc_ethercom.ec_if, 1);
}
/*
* Read EEPROM data.
* XXX what to do if EEPROM doesn't unbusy?
*/
u_int16_t
ex_read_eeprom(sc, offset)
struct ex_softc *sc;
int offset;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_int16_t data = 0, cmd = READ_EEPROM;
int off;
off = sc->ex_conf & EX_CONF_EEPROM_OFF ? 0x30 : 0;
cmd = sc->ex_conf & EX_CONF_EEPROM_8BIT ? READ_EEPROM8 : READ_EEPROM;
GO_WINDOW(0);
if (ex_eeprom_busy(sc))
goto out;
bus_space_write_2(iot, ioh, ELINK_W0_EEPROM_COMMAND,
cmd | (off + (offset & 0x3f)));
if (ex_eeprom_busy(sc))
goto out;
data = bus_space_read_2(iot, ioh, ELINK_W0_EEPROM_DATA);
out:
return data;
}
static int
ex_eeprom_busy(sc)
struct ex_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int i = 100;
while (i--) {
if (!(bus_space_read_2(iot, ioh, ELINK_W0_EEPROM_COMMAND) &
EEPROM_BUSY))
return 0;
delay(100);
}
printf("\n%s: eeprom stays busy.\n", sc->sc_dev.dv_xname);
return (1);
}
/*
* Create a new rx buffer and add it to the 'soft' rx list.
*/
static int
ex_add_rxbuf(sc, rxd)
struct ex_softc *sc;
struct ex_rxdesc *rxd;
{
struct mbuf *m, *oldm;
bus_dmamap_t rxmap;
int error, rval = 0;
oldm = rxd->rx_mbhead;
rxmap = rxd->rx_dmamap;
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m != NULL) {
MCLGET(m, M_DONTWAIT);
if ((m->m_flags & M_EXT) == 0) {
m_freem(m);
if (oldm == NULL)
return 1;
m = oldm;
m->m_data = m->m_ext.ext_buf;
rval = 1;
}
} else {
if (oldm == NULL)
return 1;
m = oldm;
m->m_data = m->m_ext.ext_buf;
rval = 1;
}
/*
* Setup the DMA map for this receive buffer.
*/
if (m != oldm) {
if (oldm != NULL)
bus_dmamap_unload(sc->sc_dmat, rxmap);
error = bus_dmamap_load(sc->sc_dmat, rxmap,
m->m_ext.ext_buf, MCLBYTES, NULL,
BUS_DMA_READ|BUS_DMA_NOWAIT);
if (error) {
printf("%s: can't load rx buffer, error = %d\n",
sc->sc_dev.dv_xname, error);
panic("ex_add_rxbuf"); /* XXX */
}
}
/*
* Align for data after 14 byte header.
*/
m->m_data += 2;
rxd->rx_mbhead = m;
rxd->rx_upd->upd_pktstatus = htole32(MCLBYTES - 2);
rxd->rx_upd->upd_frags[0].fr_addr =
htole32(rxmap->dm_segs[0].ds_addr + 2);
rxd->rx_upd->upd_nextptr = 0;
/*
* Attach it to the end of the list.
*/
if (sc->rx_head != NULL) {
sc->rx_tail->rx_next = rxd;
sc->rx_tail->rx_upd->upd_nextptr = htole32(sc->sc_upddma +
((caddr_t)rxd->rx_upd - (caddr_t)sc->sc_upd));
bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap,
(caddr_t)sc->rx_tail->rx_upd - (caddr_t)sc->sc_upd,
sizeof (struct ex_upd),
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
} else {
sc->rx_head = rxd;
}
sc->rx_tail = rxd;
bus_dmamap_sync(sc->sc_dmat, rxmap, 0, rxmap->dm_mapsize,
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap,
((caddr_t)rxd->rx_upd - (caddr_t)sc->sc_upd),
sizeof (struct ex_upd), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
return (rval);
}
u_int32_t
ex_mii_bitbang_read(self)
struct device *self;
{
struct ex_softc *sc = (void *) self;
/* We're already in Window 4. */
return (bus_space_read_2(sc->sc_iot, sc->sc_ioh, ELINK_W4_PHYSMGMT));
}
void
ex_mii_bitbang_write(self, val)
struct device *self;
u_int32_t val;
{
struct ex_softc *sc = (void *) self;
/* We're already in Window 4. */
bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_W4_PHYSMGMT, val);
}
int
ex_mii_readreg(v, phy, reg)
struct device *v;
int phy, reg;
{
struct ex_softc *sc = (struct ex_softc *)v;
int val;
if ((sc->ex_conf & EX_CONF_INTPHY) && phy != ELINK_INTPHY_ID)
return 0;
GO_WINDOW(4);
val = mii_bitbang_readreg(v, &ex_mii_bitbang_ops, phy, reg);
GO_WINDOW(1);
return (val);
}
void
ex_mii_writereg(v, phy, reg, data)
struct device *v;
int phy;
int reg;
int data;
{
struct ex_softc *sc = (struct ex_softc *)v;
GO_WINDOW(4);
mii_bitbang_writereg(v, &ex_mii_bitbang_ops, phy, reg, data);
GO_WINDOW(1);
}
void
ex_mii_statchg(v)
struct device *v;
{
struct ex_softc *sc = (struct ex_softc *)v;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int mctl;
GO_WINDOW(3);
mctl = bus_space_read_2(iot, ioh, ELINK_W3_MAC_CONTROL);
if (sc->ex_mii.mii_media_active & IFM_FDX)
mctl |= MAC_CONTROL_FDX;
else
mctl &= ~MAC_CONTROL_FDX;
bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, mctl);
GO_WINDOW(1); /* back to operating window */
}
int
ex_enable(sc)
struct ex_softc *sc;
{
if (sc->enabled == 0 && sc->enable != NULL) {
if ((*sc->enable)(sc) != 0) {
printf("%s: de/vice enable failed\n",
sc->sc_dev.dv_xname);
return (EIO);
}
sc->enabled = 1;
}
return (0);
}
void
ex_disable(sc)
struct ex_softc *sc;
{
if (sc->enabled == 1 && sc->disable != NULL) {
(*sc->disable)(sc);
sc->enabled = 0;
}
}
void
ex_power(why, arg)
int why;
void *arg;
{
struct ex_softc *sc = (void *)arg;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
int s;
s = splnet();
switch (why) {
case PWR_SUSPEND:
case PWR_STANDBY:
ex_stop(ifp, 0);
if (sc->power != NULL)
(*sc->power)(sc, why);
break;
case PWR_RESUME:
if (ifp->if_flags & IFF_UP) {
if (sc->power != NULL)
(*sc->power)(sc, why);
ex_init(ifp);
}
break;
case PWR_SOFTSUSPEND:
case PWR_SOFTSTANDBY:
case PWR_SOFTRESUME:
break;
}
splx(s);
}
Reference in New Issue View Git Blame Copy Permalink