NetBSD/sys/dev/ic/wdcvar.h

192 lines
7.6 KiB
C

/* $NetBSD: wdcvar.h,v 1.15 1999/02/08 15:22:29 bouyer Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum, by Onno van der Linden and by Manuel Bouyer.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/* XXX for scsipi_adapter */
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsipiconf.h>
#define WAITTIME (10 * hz) /* time to wait for a completion */
/* this is a lot for hard drives, but not for cdroms */
struct channel_queue { /* per channel queue (may be shared) */
TAILQ_HEAD(xferhead, wdc_xfer) sc_xfer;
};
struct channel_softc { /* Per channel data */
/* Our location */
int channel;
/* Our controller's softc */
struct wdc_softc *wdc;
/* Our registers */
bus_space_tag_t cmd_iot;
bus_space_handle_t cmd_ioh;
bus_space_tag_t ctl_iot;
bus_space_handle_t ctl_ioh;
/* data32{iot,ioh} are only used for 32 bit xfers */
bus_space_tag_t data32iot;
bus_space_handle_t data32ioh;
/* Our state */
int ch_flags;
#define WDCF_ACTIVE 0x01 /* channel is active */
#define WDCF_IRQ_WAIT 0x10 /* controller is waiting for irq */
u_int8_t ch_status; /* copy of status register */
u_int8_t ch_error; /* copy of error register */
/* per-drive infos */
struct ata_drive_datas ch_drive[2];
/*
* channel queues. May be the same for all channels, if hw channels
* are not independants
*/
struct channel_queue *ch_queue;
};
struct wdc_softc { /* Per controller state */
struct device sc_dev;
/* mandatory fields */
int cap;
/* Capabilities supported by the controller */
#define WDC_CAPABILITY_DATA16 0x0001 /* can do 16-bit data access */
#define WDC_CAPABILITY_DATA32 0x0002 /* can do 32-bit data access */
#define WDC_CAPABILITY_MODE 0x0004 /* controller knows its PIO/DMA modes */
#define WDC_CAPABILITY_DMA 0x0008 /* DMA */
#define WDC_CAPABILITY_UDMA 0x0010 /* Ultra-DMA/33 */
#define WDC_CAPABILITY_HWLOCK 0x0020 /* Needs to lock HW */
#define WDC_CAPABILITY_ATA_NOSTREAM 0x0040 /* Don't use stream funcs on ATA */
#define WDC_CAPABILITY_ATAPI_NOSTREAM 0x0080 /* Don't use stream f on ATAPI */
#define WDC_CAPABILITY_NO_EXTRA_RESETS 0x0100 /* only reset once */
u_int8_t PIO_cap; /* highest PIO mode supported */
u_int8_t DMA_cap; /* highest DMA mode supported */
u_int8_t UDMA_cap; /* highest UDMA mode supported */
int nchannels; /* Number of channels on this controller */
struct channel_softc **channels; /* channels-specific datas (array) */
/*
* The reference count here is used for both IDE and ATAPI devices.
*/
struct scsipi_adapter sc_atapi_adapter;
/* if WDC_CAPABILITY_DMA set in 'cap' */
void *dma_arg;
int (*dma_init) __P((void *, int, int, void *, size_t,
int));
void (*dma_start) __P((void *, int, int, int));
int (*dma_finish) __P((void *, int, int, int));
/* flags passed to DMA functions */
#define WDC_DMA_READ 0x01
#define WDC_DMA_POLL 0x02
/* if WDC_CAPABILITY_HWLOCK set in 'cap' */
int (*claim_hw) __P((void *, int));
void (*free_hw) __P((void *));
/* if WDC_CAPABILITY_MODE set in 'cap' */
void (*set_modes) __P((struct channel_softc *));
};
/*
* Description of a command to be handled by a controller.
* These commands are queued in a list.
*/
struct wdc_xfer {
volatile u_int c_flags;
#define C_INUSE 0x0001 /* xfer struct is in use */
#define C_ATAPI 0x0002 /* xfer is ATAPI request */
#define C_TIMEOU 0x0004 /* xfer processing timed out */
#define C_NEEDDONE 0x0010 /* need to call upper-level done */
#define C_POLL 0x0020 /* cmd is polled */
#define C_DMA 0x0040 /* cmd uses DMA */
#define C_SENSE 0x0080 /* cmd is a internal command */
/* Informations about our location */
struct channel_softc *chp;
u_int8_t drive;
/* Information about the current transfer */
void *cmd; /* wdc, ata or scsipi command structure */
void *databuf;
int c_bcount; /* byte count left */
int c_skip; /* bytes already transferred */
TAILQ_ENTRY(wdc_xfer) c_xferchain;
LIST_ENTRY(wdc_xfer) free_list;
void (*c_start) __P((struct channel_softc *, struct wdc_xfer *));
int (*c_intr) __P((struct channel_softc *, struct wdc_xfer *));
};
/*
* Public functions which can be called by ATA or ATAPI specific parts,
* or bus-specific backends.
*/
int wdcprobe __P((struct channel_softc *));
void wdcattach __P((struct channel_softc *));
int wdcintr __P((void *));
void wdc_exec_xfer __P((struct channel_softc *, struct wdc_xfer *));
struct wdc_xfer *wdc_get_xfer __P((int)); /* int = WDC_NOSLEEP/CANSLEEP */
#define WDC_CANSLEEP 0x00
#define WDC_NOSLEEP 0x01
void wdc_free_xfer __P((struct channel_softc *, struct wdc_xfer *));
void wdcstart __P((struct channel_softc *));
void wdcrestart __P((void*));
int wdcreset __P((struct channel_softc *, int));
#define VERBOSE 1
#define SILENT 0 /* wdcreset will not print errors */
int wdcwait __P((struct channel_softc *, int, int, int));
void wdcbit_bucket __P(( struct channel_softc *, int));
void wdccommand __P((struct channel_softc *, u_int8_t, u_int8_t, u_int16_t,
u_int8_t, u_int8_t, u_int8_t, u_int8_t));
void wdccommandshort __P((struct channel_softc *, int, int));
void wdctimeout __P((void *arg));
int wdc_addref __P((struct channel_softc *));
void wdc_delref __P((struct channel_softc *));
/*
* ST506 spec says that if READY or SEEKCMPLT go off, then the read or write
* command is aborted.
*/
#define wait_for_drq(chp, timeout) wdcwait((chp), WDCS_DRQ, WDCS_DRQ, (timeout))
#define wait_for_unbusy(chp, timeout) wdcwait((chp), 0, 0, (timeout))
#define wait_for_ready(chp, timeout) wdcwait((chp), WDCS_DRDY, \
WDCS_DRDY, (timeout))
/* ATA/ATAPI specs says a device can take 31s to reset */
#define WDC_RESET_WAIT 31000
void wdc_atapibus_attach __P((struct channel_softc *));
int atapi_print __P((void *, const char *));