NetBSD/sys/dev/ic/joy.c

231 lines
5.7 KiB
C

/* $NetBSD: joy.c,v 1.9 2005/12/11 12:21:27 christos Exp $ */
/*-
* Copyright (c) 1995 Jean-Marc Zucconi
* All rights reserved.
*
* Ported to NetBSD by Matthieu Herrb <matthieu@laas.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: joy.c,v 1.9 2005/12/11 12:21:27 christos Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/errno.h>
#include <sys/conf.h>
#include <sys/event.h>
#include <sys/vnode.h>
#include <machine/bus.h>
#include <sys/joystick.h>
#include <dev/ic/joyvar.h>
/*
* The game port can manage 4 buttons and 4 variable resistors (usually 2
* joysticks, each with 2 buttons and 2 pots.) via the port at address 0x201.
* Getting the state of the buttons is done by reading the game port;
* buttons 1-4 correspond to bits 4-7 and resistors 1-4 (X1, Y1, X2, Y2)
* to bits 0-3. If button 1 (resp 2, 3, 4) is pressed, the bit 4 (resp 5,
* 6, 7) is set to 0 to get the value of a resistor, write the value 0xff
* at port and wait until the corresponding bit returns to 0.
*/
#define JOYPART(d) (minor(d) & 1)
#define JOYUNIT(d) (minor(d) >> 1)
#ifndef JOY_TIMEOUT
#define JOY_TIMEOUT 2000 /* 2 milliseconds */
#endif
extern struct cfdriver joy_cd;
dev_type_open(joyopen);
dev_type_close(joyclose);
dev_type_read(joyread);
dev_type_ioctl(joyioctl);
const struct cdevsw joy_cdevsw = {
joyopen, joyclose, joyread, nowrite, joyioctl,
nostop, notty, nopoll, nommap, nokqfilter,
};
void
joyattach(sc)
struct joy_softc *sc;
{
sc->timeout[0] = sc->timeout[1] = 0;
bus_space_write_1(sc->sc_iot, sc->sc_ioh, 0, 0xff);
DELAY(10000); /* 10 ms delay */
printf("%s: joystick %sconnected\n", sc->sc_dev.dv_xname,
(bus_space_read_1(sc->sc_iot, sc->sc_ioh, 0) & 0x0f) == 0x0f ?
"not " : "");
}
int
joydetach(sc, flags)
struct joy_softc *sc;
int flags;
{
int maj, mn;
maj = cdevsw_lookup_major(&joy_cdevsw);
mn = sc->sc_dev.dv_unit << 1;
vdevgone(maj, mn, mn, VCHR);
vdevgone(maj, mn + 1, mn + 1, VCHR);
return (0);
}
int
joyopen(dev, flag, mode, l)
dev_t dev;
int flag, mode;
struct lwp *l;
{
int unit = JOYUNIT(dev);
int i = JOYPART(dev);
struct joy_softc *sc;
if (unit >= joy_cd.cd_ndevs)
return (ENXIO);
sc = joy_cd.cd_devs[unit];
if (sc == 0)
return (ENXIO);
if (sc->timeout[i])
return (EBUSY);
sc->x_off[i] = sc->y_off[i] = 0;
sc->timeout[i] = JOY_TIMEOUT;
return (0);
}
int
joyclose(dev, flag, mode, l)
dev_t dev;
int flag, mode;
struct lwp *l;
{
int unit = JOYUNIT(dev);
int i = JOYPART(dev);
struct joy_softc *sc = joy_cd.cd_devs[unit];
sc->timeout[i] = 0;
return (0);
}
int
joyread(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
int unit = JOYUNIT(dev);
struct joy_softc *sc = joy_cd.cd_devs[unit];
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct joystick c;
int i, s;
struct timeval start, now, diff;
int state = 0, x = 0, y = 0;
s = splhigh(); /* XXX */
bus_space_write_1(iot, ioh, 0, 0xff);
microtime(&start);
now = start; /* structure assignment */
i = sc->timeout[JOYPART(dev)];
for (;;) {
timersub(&now, &start, &diff);
if (diff.tv_sec > 0 || diff.tv_usec > i)
break;
state = bus_space_read_1(iot, ioh, 0);
if (JOYPART(dev) == 1)
state >>= 2;
if (!x && !(state & 0x01))
x = diff.tv_usec;
if (!y && !(state & 0x02))
y = diff.tv_usec;
if (x && y)
break;
microtime(&now);
}
splx(s); /* XXX */
c.x = x ? sc->x_off[JOYPART(dev)] + x : 0x80000000;
c.y = y ? sc->y_off[JOYPART(dev)] + y : 0x80000000;
state >>= 4;
c.b1 = ~state & 1;
c.b2 = ~(state >> 1) & 1;
return (uiomove(&c, sizeof(struct joystick), uio));
}
int
joyioctl(dev, cmd, data, flag, l)
dev_t dev;
u_long cmd;
caddr_t data;
int flag;
struct lwp *l;
{
int unit = JOYUNIT(dev);
struct joy_softc *sc = joy_cd.cd_devs[unit];
int i = JOYPART(dev);
int x;
switch (cmd) {
case JOY_SETTIMEOUT:
x = *(int *) data;
if (x < 1 || x > 10000) /* 10ms maximum! */
return (EINVAL);
sc->timeout[i] = x;
break;
case JOY_GETTIMEOUT:
*(int *) data = sc->timeout[i];
break;
case JOY_SET_X_OFFSET:
sc->x_off[i] = *(int *) data;
break;
case JOY_SET_Y_OFFSET:
sc->y_off[i] = *(int *) data;
break;
case JOY_GET_X_OFFSET:
*(int *) data = sc->x_off[i];
break;
case JOY_GET_Y_OFFSET:
*(int *) data = sc->y_off[i];
break;
default:
return (ENXIO);
}
return 0;
}