NetBSD/sys/dev/ic/fmv.c

170 lines
4.6 KiB
C

/* $NetBSD: fmv.c,v 1.6 2005/02/27 00:27:01 perry Exp $ */
/*
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
*
* This software may be used, modified, copied, distributed, and sold, in
* both source and binary form provided that the above copyright, these
* terms and the following disclaimer are retained. The name of the author
* and/or the contributor may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Portions copyright (C) 1993, David Greenman. This software may be used,
* modified, copied, distributed, and sold, in both source and binary form
* provided that the above copyright and these terms are retained. Under no
* circumstances is the author responsible for the proper functioning of this
* software, nor does the author assume any responsibility for damages
* incurred with its use.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: fmv.c,v 1.6 2005/02/27 00:27:01 perry Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <net/if.h>
#include <net/if_ether.h>
#include <net/if_media.h>
#include <machine/bus.h>
#include <dev/ic/mb86960reg.h>
#include <dev/ic/mb86960var.h>
#include <dev/ic/fmvreg.h>
#include <dev/ic/fmvvar.h>
/*
* Determine type and ethernet address.
*/
int
fmv_detect(bus_space_tag_t iot, bus_space_handle_t ioh, uint8_t *enaddr)
{
int model, id, type;
/* Get our station address from EEPROM. */
bus_space_read_region_1(iot, ioh, FE_FMV4, enaddr, ETHER_ADDR_LEN);
/* Make sure we got a valid station address. */
if ((enaddr[0] & 0x03) != 0x00 ||
(enaddr[0] == 0x00 && enaddr[1] == 0x00 && enaddr[2] == 0x00)) {
#ifdef FMV_DEBUG
printf("fmv_detect: invalid ethernet address\n");
#endif
return (0);
}
/* Determine the card type. */
model = bus_space_read_1(iot, ioh, FE_FMV0) & FE_FMV0_MODEL;
id = bus_space_read_1(iot, ioh, FE_FMV1) & FE_FMV1_CARDID_REV;
switch (model) {
case FE_FMV0_MODEL_FMV181:
type = FE_TYPE_FMV181;
if (id == FE_FMV1_CARDID_REV_A)
type = FE_TYPE_FMV181A;
break;
case FE_FMV0_MODEL_FMV182:
type = FE_TYPE_FMV182;
if (id == FE_FMV1_CARDID_REV_A)
type = FE_TYPE_FMV182A;
else if (id == FE_FMV1_CARDID_PNP)
type = FE_TYPE_FMV184;
break;
case FE_FMV0_MODEL_FMV183:
type = FE_TYPE_FMV183;
break;
default:
type = 0;
#ifdef FMV_DEBUG
printf("fmv_detect: unknown card\n");
#endif
break;
}
return (type);
}
void
fmv_attach(struct mb86960_softc *sc)
{
bus_space_tag_t iot;
bus_space_handle_t ioh;
const char *typestr;
int type;
uint8_t myea[ETHER_ADDR_LEN];
iot = sc->sc_bst;
ioh = sc->sc_bsh;
/* Determine the card type. */
type = fmv_detect(iot, ioh, myea);
switch (type) {
case FE_TYPE_FMV181:
typestr = "FMV-181";
break;
case FE_TYPE_FMV181A:
typestr = "FMV-181A";
break;
case FE_TYPE_FMV182:
typestr = "FMV-182";
break;
case FE_TYPE_FMV182A:
typestr = "FMV-182A";
break;
case FE_TYPE_FMV183:
typestr = "FMV-183";
break;
case FE_TYPE_FMV184:
typestr = "FMV-184";
break;
default:
/* Unknown card type: maybe a new model, but... */
panic("\n%s: unknown FMV-18x card", sc->sc_dev.dv_xname);
}
printf(": %s Ethernet\n", typestr);
/* This interface is always enabled. */
sc->sc_stat |= FE_STAT_ENABLED;
/*
* Minimum initialization of the hardware.
* We write into registers; hope I/O ports have no
* overlap with other boards.
*/
/* Initialize ASIC. */
bus_space_write_1(iot, ioh, FE_FMV3, 0);
bus_space_write_1(iot, ioh, FE_FMV10, 0);
/* Wait for a while. I'm not sure this is necessary. FIXME */
delay(200);
/*
* Do generic MB86960 attach.
*/
mb86960_attach(sc, myea);
/* Is this really needs to be done here? XXX */
/* Turn the "master interrupt control" flag of ASIC on. */
bus_space_write_1(iot, ioh, FE_FMV3, FE_FMV3_ENABLE_FLAG);
mb86960_config(sc, NULL, 0, 0);
}