NetBSD/sys/arch/mips/include/locore.h
simonb 8b4906e391 Add prototypes for the 64-bit pagezero functions.
Bracket some function prototypes with #ifdef/#endif.
2002-06-03 01:51:05 +00:00

337 lines
9.5 KiB
C

/* $NetBSD: locore.h,v 1.63 2002/06/03 01:51:05 simonb Exp $ */
/*
* Copyright 1996 The Board of Trustees of The Leland Stanford
* Junior University. All Rights Reserved.
*
* Permission to use, copy, modify, and distribute this
* software and its documentation for any purpose and without
* fee is hereby granted, provided that the above copyright
* notice appear in all copies. Stanford University
* makes no representations about the suitability of this
* software for any purpose. It is provided "as is" without
* express or implied warranty.
*/
/*
* Jump table for MIPS cpu locore functions that are implemented
* differently on different generations, or instruction-level
* archtecture (ISA) level, the Mips family.
*
* We currently provide support for MIPS I and MIPS III.
*/
#ifndef _MIPS_LOCORE_H
#define _MIPS_LOCORE_H
#ifndef _LKM
#include "opt_cputype.h"
#include "opt_mips_cache.h"
#endif
#include <mips/cpuregs.h>
struct tlb;
uint32_t mips_cp0_cause_read(void);
void mips_cp0_cause_write(uint32_t);
uint32_t mips_cp0_status_read(void);
void mips_cp0_status_write(uint32_t);
#ifdef MIPS1
void mips1_SetPID(int);
void mips1_TBIA(int);
void mips1_TBIAP(int);
void mips1_TBIS(vaddr_t);
int mips1_TLBUpdate(u_int, u_int);
void mips1_wbflush(void);
void mips1_proc_trampoline(void);
void mips1_cpu_switch_resume(void);
uint32_t tx3900_cp0_config_read(void);
#endif
#if defined(MIPS3) || defined(MIPS4)
void mips3_SetPID(int);
void mips3_TBIA(int);
void mips3_TBIAP(int);
void mips3_TBIS(vaddr_t);
int mips3_TLBUpdate(u_int, u_int);
void mips3_TLBRead(int, struct tlb *);
void mips3_wbflush(void);
void mips3_proc_trampoline(void);
void mips3_cpu_switch_resume(void);
void mips3_pagezero(caddr_t dst);
#ifdef MIPS3_5900
void mips5900_SetPID(int);
void mips5900_TBIA(int);
void mips5900_TBIAP(int);
void mips5900_TBIS(vaddr_t);
int mips5900_TLBUpdate(u_int, u_int);
void mips5900_TLBRead(int, struct tlb *);
void mips5900_wbflush(void);
void mips5900_proc_trampoline(void);
void mips5900_cpu_switch_resume(void);
void mips5900_pagezero(caddr_t dst);
#endif
#endif
#ifdef MIPS32
void mips32_SetPID(int);
void mips32_TBIA(int);
void mips32_TBIAP(int);
void mips32_TBIS(vaddr_t);
int mips32_TLBUpdate(u_int, u_int);
void mips32_TLBRead(int, struct tlb *);
void mips32_wbflush(void);
void mips32_proc_trampoline(void);
void mips32_cpu_switch_resume(void);
#endif
#ifdef MIPS64
void mips64_SetPID(int);
void mips64_TBIA(int);
void mips64_TBIAP(int);
void mips64_TBIS(vaddr_t);
int mips64_TLBUpdate(u_int, u_int);
void mips64_TLBRead(int, struct tlb *);
void mips64_wbflush(void);
void mips64_proc_trampoline(void);
void mips64_cpu_switch_resume(void);
void mips64_pagezero(caddr_t dst);
#endif
#if defined(MIPS3) || defined(MIPS4) || defined(MIPS32) || defined(MIPS64)
uint32_t mips3_cp0_compare_read(void);
void mips3_cp0_compare_write(uint32_t);
uint32_t mips3_cp0_config_read(void);
void mips3_cp0_config_write(uint32_t);
#if defined(MIPS32) || defined(MIPS64)
uint32_t mipsNN_cp0_config1_read(void);
void mipsNN_cp0_config1_write(uint32_t);
uint32_t mipsNN_cp0_config2_read(void);
uint32_t mipsNN_cp0_config3_read(void);
#endif
uint32_t mips3_cp0_count_read(void);
void mips3_cp0_count_write(uint32_t);
uint32_t mips3_cp0_wired_read(void);
void mips3_cp0_wired_write(uint32_t);
uint64_t mips3_ld(uint64_t *);
void mips3_sd(uint64_t *, uint64_t);
#endif /* MIPS3 || MIPS4 || MIPS32 || MIPS64 */
#if defined(MIPS3) || defined(MIPS4) || defined(MIPS64)
static inline uint32_t mips3_lw_a64(uint64_t addr)
__attribute__((__unused__));
static inline void mips3_sw_a64(uint64_t addr, uint32_t val)
__attribute__ ((__unused__));
static inline uint32_t
mips3_lw_a64(uint64_t addr)
{
uint32_t addrlo, addrhi;
uint32_t rv;
uint32_t sr;
sr = mips_cp0_status_read();
mips_cp0_status_write(sr | MIPS3_SR_KX);
addrlo = addr & 0xffffffff;
addrhi = addr >> 32;
__asm__ __volatile__ (" \n\
.set push \n\
.set mips3 \n\
.set noreorder \n\
.set noat \n\
dsll32 $3, %1, 0 \n\
dsll32 $1, %2, 0 \n\
dsrl32 $3, $3, 0 \n\
or $1, $1, $3 \n\
lw %0, 0($1) \n\
.set pop \n\
" : "=r"(rv) : "r"(addrlo), "r"(addrhi) : "$1", "$3" );
mips_cp0_status_write(sr);
return (rv);
}
static inline void
mips3_sw_a64(uint64_t addr, uint32_t val)
{
uint32_t addrlo, addrhi;
uint32_t sr;
sr = mips_cp0_status_read();
mips_cp0_status_write(sr | MIPS3_SR_KX);
addrlo = addr & 0xffffffff;
addrhi = addr >> 32;
__asm__ __volatile__ (" \n\
.set push \n\
.set mips3 \n\
.set noreorder \n\
.set noat \n\
dsll32 $3, %1, 0 \n\
dsll32 $1, %2, 0 \n\
dsrl32 $3, $3, 0 \n\
or $1, $1, $3 \n\
sw %0, 0($1) \n\
.set pop \n\
" : : "r"(val), "r"(addrlo), "r"(addrhi) : "$1", "$3" );
mips_cp0_status_write(sr);
}
#endif /* MIPS3 || MIPS4 || MIPS64 */
/*
* A vector with an entry for each mips-ISA-level dependent
* locore function, and macros which jump through it.
*
* XXX the macro names are chosen to be compatible with the old
* XXX Sprite coding-convention names used in 4.4bsd/pmax.
*/
typedef struct {
void (*setTLBpid)(int pid);
void (*TBIAP)(int);
void (*TBIS)(vaddr_t);
int (*tlbUpdate)(u_int highreg, u_int lowreg);
void (*wbflush)(void);
} mips_locore_jumpvec_t;
void mips_set_wbflush(void (*)(void));
void mips_wait_idle(void);
void stacktrace(void);
void logstacktrace(void);
/*
* The "active" locore-fuction vector, and
*/
extern mips_locore_jumpvec_t mips_locore_jumpvec;
extern long *mips_locoresw[];
#if defined(MIPS1) && !defined(MIPS3) && !defined(MIPS32) && !defined(MIPS64)
#define MachSetPID mips1_SetPID
#define MIPS_TBIAP() mips1_TBIAP(mips_num_tlb_entries)
#define MIPS_TBIS mips1_TBIS
#define MachTLBUpdate mips1_TLBUpdate
#define wbflush() mips1_wbflush()
#define proc_trampoline mips1_proc_trampoline
#elif !defined(MIPS1) && defined(MIPS3) && !defined(MIPS32) && !defined(MIPS64) && !defined(MIPS3_5900)
#define MachSetPID mips3_SetPID
#define MIPS_TBIAP() mips3_TBIAP(mips_num_tlb_entries)
#define MIPS_TBIS mips3_TBIS
#define MachTLBUpdate mips3_TLBUpdate
#define proc_trampoline mips3_proc_trampoline
#define wbflush() mips3_wbflush()
#elif !defined(MIPS1) && !defined(MIPS3) && defined(MIPS32) && !defined(MIPS64)
#define MachSetPID mips32_SetPID
#define MIPS_TBIAP() mips32_TBIAP(mips_num_tlb_entries)
#define MIPS_TBIS mips32_TBIS
#define MachTLBUpdate mips32_TLBUpdate
#define proc_trampoline mips32_proc_trampoline
#define wbflush() mips32_wbflush()
#elif !defined(MIPS1) && !defined(MIPS3) && !defined(MIPS32) && defined(MIPS64)
/* all common with mips3 */
#define MachSetPID mips64_SetPID
#define MIPS_TBIAP() mips64_TBIAP(mips_num_tlb_entries)
#define MIPS_TBIS mips64_TBIS
#define MachTLBUpdate mips64_TLBUpdate
#define proc_trampoline mips64_proc_trampoline
#define wbflush() mips64_wbflush()
#elif !defined(MIPS1) && defined(MIPS3) && !defined(MIPS32) && !defined(MIPS64) && defined(MIPS3_5900)
#define MachSetPID mips5900_SetPID
#define MIPS_TBIAP() mips5900_TBIAP(mips_num_tlb_entries)
#define MIPS_TBIS mips5900_TBIS
#define MachTLBUpdate mips5900_TLBUpdate
#define proc_trampoline mips5900_proc_trampoline
#define wbflush() mips5900_wbflush()
#else
#define MachSetPID (*(mips_locore_jumpvec.setTLBpid))
#define MIPS_TBIAP() (*(mips_locore_jumpvec.TBIAP))(mips_num_tlb_entries)
#define MIPS_TBIS (*(mips_locore_jumpvec.TBIS))
#define MachTLBUpdate (*(mips_locore_jumpvec.tlbUpdate))
#define wbflush() (*(mips_locore_jumpvec.wbflush))()
#define proc_trampoline (mips_locoresw[1])
#endif
#define CPU_IDLE (mips_locoresw[2])
/* cpu_switch_resume is called inside locore.S */
/*
* CPU identification, from PRID register.
*/
typedef int mips_prid_t;
#define MIPS_PRID_REV(x) (((x) >> 0) & 0x00ff)
#define MIPS_PRID_IMPL(x) (((x) >> 8) & 0x00ff)
/* pre-MIPS32/64 */
#define MIPS_PRID_RSVD(x) (((x) >> 16) & 0xffff)
#define MIPS_PRID_REV_MIN(x) ((MIPS_PRID_REV(x) >> 0) & 0x0f)
#define MIPS_PRID_REV_MAJ(x) ((MIPS_PRID_REV(x) >> 4) & 0x0f)
/* MIPS32/64 */
#define MIPS_PRID_CID(x) (((x) >> 16) & 0x00ff) /* Company ID */
#define MIPS_PRID_CID_PREHISTORIC 0x00 /* Not MIPS32/64 */
#define MIPS_PRID_CID_MTI 0x01 /* MIPS Technologies, Inc. */
#define MIPS_PRID_CID_BROADCOM 0x02 /* Broadcom */
#define MIPS_PRID_CID_ALCHEMY 0x03 /* Alchemy Semiconductor */
#define MIPS_PRID_CID_SIBYTE 0x04 /* SiByte */
#define MIPS_PRID_CID_SANDCRAFT 0x05 /* SandCraft */
#define MIPS_PRID_COPTS(x) (((x) >> 24) & 0x00ff) /* Company Options */
#ifdef _KERNEL
/*
* Global variables used to communicate CPU type, and parameters
* such as cache size, from locore to higher-level code (e.g., pmap).
*/
extern mips_prid_t cpu_id;
extern mips_prid_t fpu_id;
extern int mips_num_tlb_entries;
void mips_pagecopy(caddr_t dst, caddr_t src);
void mips_pagezero(caddr_t dst);
#ifdef __HAVE_MIPS_MACHDEP_CACHE_CONFIG
void mips_machdep_cache_config(void);
#endif
/*
* trapframe argument passed to trap()
*/
struct trapframe {
mips_reg_t tf_regs[17];
mips_reg_t tf_ra;
mips_reg_t tf_sr;
mips_reg_t tf_mullo;
mips_reg_t tf_mulhi;
mips_reg_t tf_epc; /* may be changed by trap() call */
u_int32_t tf_ppl; /* previous priority level */
int32_t tf_pad; /* for 8 byte aligned */
};
/*
* Stack frame for kernel traps. four args passed in registers.
* A trapframe is pointed to by the 5th arg, and a dummy sixth argument
* is used to avoid alignment problems
*/
struct kernframe {
register_t cf_args[4 + 1];
register_t cf_pad; /* (for 8 word alignment) */
register_t cf_sp;
register_t cf_ra;
struct trapframe cf_frame;
};
#endif /* _KERNEL */
#endif /* _MIPS_LOCORE_H */