411 lines
13 KiB
Plaintext
411 lines
13 KiB
Plaintext
# $NetBSD: IOPENER,v 1.37 2003/04/10 22:06:58 christos Exp $
|
|
#
|
|
# IOPENER -- GENERIC-like kernel for the Netpliance i-opener
|
|
# from: GENERIC,v 1.358 2000/07/05 04:07:25 sommerfeld Exp
|
|
#
|
|
|
|
include "arch/i386/conf/std.i386"
|
|
|
|
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "IOPENER-$Revision: 1.37 $"
|
|
|
|
maxusers 32 # estimated number of users
|
|
|
|
options I586_CPU
|
|
|
|
# CPU-related options.
|
|
#options VM86 # virtual 8086 emulation
|
|
#options USER_LDT # user-settable LDT; used by WINE
|
|
# eliminate delay no-ops in I/O; recommended on all but very old machines
|
|
options DUMMY_NOPS
|
|
|
|
# delay between "rebooting ..." message and hardware reset, in milliseconds
|
|
#options CPURESET_DELAY=2000
|
|
|
|
# This option allows you to force a serial console at the specified
|
|
# I/O address. see console(4) for details.
|
|
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
|
|
# you don't want the option below ON iff you are using the
|
|
# serial console option of the new boot strap code.
|
|
#options CONS_OVERRIDE # Always use above! independent of boot info
|
|
|
|
# Standard system options
|
|
|
|
options INSECURE # disable kernel security levels
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
options NTP # NTP phase/frequency locked loop
|
|
|
|
options KTRACE # system call tracing via ktrace(1)
|
|
|
|
options SYSVMSG # System V-like message queues
|
|
options SYSVSEM # System V-like semaphores
|
|
options SYSVSHM # System V-like memory sharing
|
|
#options SHMMAXPGS=2048 # 2048 pages is the default
|
|
|
|
#options LKM # loadable kernel modules
|
|
|
|
#options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
|
|
# Diagnostic/debugging support options
|
|
options DIAGNOSTIC # expensive kernel consistency checks
|
|
#options DEBUG # expensive debugging checks/support
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
|
options DDB # in-kernel debugger
|
|
#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
|
|
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
|
|
#options KGDB # remote debugger
|
|
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
|
|
#makeoptions DEBUG="-g" # compile full symbol table
|
|
|
|
# Compatibility options
|
|
options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
|
|
options COMPAT_09 # NetBSD 0.9
|
|
options COMPAT_10 # NetBSD 1.0
|
|
options COMPAT_11 # NetBSD 1.1
|
|
options COMPAT_12 # NetBSD 1.2, 386BSD, and BSDI
|
|
options COMPAT_13 # NetBSD 1.3, 386BSD, and BSDI
|
|
options COMPAT_14 # NetBSD 1.4
|
|
options COMPAT_15 # NetBSD 1.5
|
|
options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
|
|
#options COMPAT_386BSD_MBRPART # recognize old partition ID
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
|
|
#options COMPAT_SVR4 # binary compatibility with SVR4
|
|
#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
|
|
options COMPAT_LINUX # binary compatibility with Linux
|
|
#options COMPAT_FREEBSD # binary compatibility with FreeBSD
|
|
|
|
# File systems
|
|
file-system FFS # UFS
|
|
#file-system EXT2FS # second extended file system (linux)
|
|
#file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NFS # Network File System client
|
|
#file-system NTFS # Windows/NT file system (experimental)
|
|
#file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
#file-system MSDOSFS # MS-DOS file system
|
|
#file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
#file-system NULLFS # loopback file system
|
|
#file-system OVERLAY # overlay file system
|
|
#file-system PORTAL # portal filesystem (still experimental)
|
|
#file-system PROCFS # /proc
|
|
#file-system UMAPFS # NULLFS + uid and gid remapping
|
|
#file-system UNION # union file system
|
|
#file-system CODA # Coda File System; also needs vcoda (below)
|
|
|
|
# File system options
|
|
#options QUOTA # UFS quotas
|
|
#options FFS_EI # FFS Endian Independent support
|
|
options SOFTDEP # FFS soft updates support.
|
|
#options NFSSERVER # Network File System server
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
|
|
# Networking options
|
|
#options GATEWAY # packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
#options NS # XNS
|
|
#options NSIP # XNS tunneling over IP
|
|
#options ISO,TPIP # OSI
|
|
#options EON # OSI tunneling over IP
|
|
#options CCITT,LLC,HDLC # X.25
|
|
#options NETATALK # AppleTalk networking protocols
|
|
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
#options PPP_DEFLATE # Deflate compression support for PPP
|
|
#options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
#options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
#options IPFILTER_LOG # ipmon(8) log support
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
# Warning, these may compile large string tables into the kernel!
|
|
options MIIVERBOSE # verbose PHY autoconfig messages
|
|
options PCIVERBOSE # verbose PCI device autoconfig messages
|
|
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
#options SCSIVERBOSE # human readable SCSI error messages
|
|
options USBVERBOSE # verbose USB device autoconfig messages
|
|
#options PNPBIOSVERBOSE # verbose PnP BIOS messages
|
|
#options PNPBIOSDEBUG # more fulsome PnP BIOS debugging messages
|
|
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
|
|
|
|
#
|
|
# wscons options
|
|
#
|
|
# builtin terminal emulations
|
|
#options WSEMUL_SUN # sun terminal emulation
|
|
options WSEMUL_VT100 # VT100 / VT220 emulation
|
|
# different kernel output - see dev/wscons/wsdisplayvar.h
|
|
options WS_KERNEL_FG=WSCOL_GREEN
|
|
#options WS_KERNEL_BG=WSCOL_BLACK
|
|
# compatibility to other console drivers
|
|
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
|
|
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
|
|
options WSDISPLAY_COMPAT_USL # VT handling
|
|
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
|
|
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
|
|
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
|
|
|
|
# Make F1 ("Back") -> Escape, F2-F12 ("Forward" to "Home") -> F1-F11
|
|
options PCKBD_LAYOUT="(KB_US | KB_IOPENER)"
|
|
|
|
# allocate a number of virtual screens at autoconfiguration time
|
|
#options WSDISPLAY_DEFAULTSCREENS=4
|
|
# use a large software cursor that doesn't blink
|
|
#options PCDISPLAY_SOFTCURSOR
|
|
|
|
# Kernel root file system and dump configuration.
|
|
config netbsd root on ? type ?
|
|
#config netbsd root on wd0a type ffs
|
|
#config netbsd root on ? type nfs
|
|
|
|
#
|
|
# Device configuration
|
|
#
|
|
|
|
mainbus0 at root
|
|
cpu0 at mainbus0
|
|
apm0 at mainbus0 # Advanced power management
|
|
|
|
# Tuning for power management, see apm(4) for more details.
|
|
#options APM_NO_IDLE # Don't call BIOS CPU idle function
|
|
#options APM_V10_ONLY # Use only the APM 1.0 calls
|
|
#options APM_NO_POWEROFF # Don't power off on halt(8)
|
|
#options APM_POWER_PRINT # Print stats on the console
|
|
#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
|
|
|
|
|
|
# Basic Bus Support
|
|
|
|
# PCI bus support
|
|
pci* at mainbus? bus ?
|
|
pci* at pchb? bus ?
|
|
pci* at ppb? bus ?
|
|
|
|
# Configure PCI using BIOS information
|
|
#options PCIBIOS # PCI BIOS support
|
|
#options PCIBIOSVERBOSE # PCI BIOS verbose info
|
|
#options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
|
|
#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
|
|
#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
|
|
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
|
|
#options PCIBIOS_INTR_GUESS # see pcibios(4)
|
|
#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
|
|
|
|
# PCI bridges
|
|
pchb* at pci? dev ? function ? # PCI-Host bridges
|
|
pcib* at pci? dev ? function ? # PCI-ISA bridges
|
|
ppb* at pci? dev ? function ? # PCI-PCI bridges
|
|
|
|
# ISA bus support
|
|
isa* at pcib?
|
|
|
|
# ISA Plug-and-Play bus support
|
|
isapnp0 at isa?
|
|
|
|
# Coprocessor Support
|
|
|
|
# Math Coprocessor support
|
|
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
|
|
|
|
|
|
# Console Devices
|
|
|
|
# Keyboard layout configuration for pccons
|
|
#options FRENCH_KBD
|
|
#options FINNISH_KBD
|
|
#options GERMAN_KBD
|
|
#options NORWEGIAN_KBD
|
|
|
|
# wscons
|
|
pckbc0 at isa? # pc keyboard controller
|
|
pckbd* at pckbc? # PC keyboard
|
|
pms* at pckbc? # PS/2 mouse for wsmouse
|
|
vga* at pci? dev ? function ?
|
|
wsdisplay* at vga? console ?
|
|
wskbd* at pckbd? console ?
|
|
wsmouse* at pms? mux 0
|
|
|
|
pcppi0 at isa?
|
|
sysbeep0 at pcppi?
|
|
|
|
# Serial Devices
|
|
|
|
# ISA serial interfaces
|
|
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
|
|
com1 at isa? port 0x2f8 irq 3
|
|
|
|
|
|
# Parallel Printer Interfaces
|
|
|
|
# ISA parallel printer interfaces
|
|
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
|
|
|
|
|
|
# IDE and related devices
|
|
# PCI IDE controllers - see pciide(4) for supported hardware.
|
|
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
|
|
# how to set up DMA modes for this chip. This may work, or may cause
|
|
# a machine hang with some controllers.
|
|
pciide* at pci? dev ? function ? flags 0x0000
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
wd* at pciide? channel ? drive ? flags 0x0000
|
|
|
|
# Network Interfaces
|
|
|
|
# MII/PHY support
|
|
exphy* at mii? phy ? # 3Com internal PHYs
|
|
icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
|
|
inphy* at mii? phy ? # Intel 82555 PHYs
|
|
iophy* at mii? phy ? # Intel 82553 PHYs
|
|
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
|
|
nsphy* at mii? phy ? # NS83840 PHYs
|
|
nsphyter* at mii? phy ? # NS83843 PHYs
|
|
qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
|
|
sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
|
|
tlphy* at mii? phy ? # ThunderLAN PHYs
|
|
tqphy* at mii? phy ? # TDK Semiconductor PHYs
|
|
ukphy* at mii? phy ? # generic unknown PHYs
|
|
|
|
|
|
# USB Controller and Devices
|
|
|
|
# PCI USB controllers
|
|
uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
|
|
|
|
# USB bus support
|
|
usb* at uhci?
|
|
|
|
# USB Hubs
|
|
uhub* at usb?
|
|
uhub* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB HID device
|
|
uhidev* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB Mice
|
|
ums* at uhidev? reportid ?
|
|
wsmouse* at ums? mux 0
|
|
|
|
# USB Keyboards
|
|
ukbd* at uhidev? reportid ?
|
|
wskbd* at ukbd? console ? mux 1
|
|
|
|
# USB Generic HID devices
|
|
uhid* at uhidev? reportid ?
|
|
|
|
# USB Printer
|
|
ulpt* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB Modem
|
|
umodem* at uhub? port ? configuration ?
|
|
ucom* at umodem?
|
|
|
|
# USB Mass Storage
|
|
umass* at uhub? port ? configuration ? interface ?
|
|
#scsibus* at scsi?
|
|
|
|
# USB audio
|
|
uaudio* at uhub? port ? configuration ?
|
|
|
|
# USB Ethernet adapters
|
|
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
|
|
cue* at uhub? port ? # CATC USB-EL1201A based adapters
|
|
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
|
|
uax* at uhub? port ? # ASIX AX88172 based adapters
|
|
url* at uhub? port ? # Realtek RTL8150L based adapters
|
|
|
|
# USB Handspring Visor
|
|
#uvisor* at uhub? port ?
|
|
#ucom* at uvisor?
|
|
|
|
# Y@P firmware loader
|
|
uyap* at uhub? port ?
|
|
|
|
# USB Generic driver
|
|
ugen* at uhub? port ?
|
|
|
|
|
|
|
|
# Audio Devices
|
|
|
|
# ISA Plug-and-Play audio devices
|
|
ym* at isapnp? # Yamaha OPL3-SA3 audio
|
|
|
|
# OPL[23] FM synthesizers
|
|
opl* at ym?
|
|
|
|
# Audio support
|
|
audio* at audiobus?
|
|
|
|
# MPU 401 UARTs
|
|
mpu* at ym?
|
|
|
|
# MIDI support
|
|
midi* at midibus?
|
|
|
|
# The spkr driver provides a simple tone interface to the built in speaker.
|
|
#spkr0 at pcppi? # PC speaker
|
|
|
|
|
|
# Pull in optional local configuration
|
|
include "arch/i386/conf/GENERIC.local"
|
|
|
|
|
|
# Pseudo-Devices
|
|
|
|
# disk/mass storage pseudo-devices
|
|
#pseudo-device ccd 4 # concatenated/striped disk devices
|
|
#pseudo-device raid 4 # RAIDframe disk driver
|
|
#options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
#pseudo-device md 1 # memory disk device (ramdisk)
|
|
#pseudo-device vnd 4 # disk-like interface to files
|
|
|
|
# network pseudo-devices
|
|
pseudo-device bpfilter 8 # Berkeley packet filter
|
|
pseudo-device ipfilter # IP filter (firewall) and NAT
|
|
pseudo-device loop # network loopback
|
|
pseudo-device ppp 2 # Point-to-Point Protocol
|
|
pseudo-device sl 2 # Serial Line IP
|
|
#pseudo-device strip 2 # Starmode Radio IP (Metricom)
|
|
#pseudo-device tun 2 # network tunneling over tty
|
|
#pseudo-device gre 2 # generic L3 over IP tunnel
|
|
#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
#pseudo-device tb 1 # tablet line discipline
|
|
pseudo-device sequencer 1 # MIDI sequencer
|
|
# rnd works; RND_COM does not on port i386 yet.
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
|
|
|
# wscons pseudo-devices
|
|
pseudo-device wsmux # mouse & keyboard multiplexor
|
|
pseudo-device wsfont
|