NetBSD/usr.sbin/xntp/xntpd/ntp_intres.c

916 lines
21 KiB
C

/* $NetBSD: ntp_intres.c,v 1.3 1998/03/06 18:17:21 christos Exp $ */
/*
* ripped off from ../xnptres/xntpres.c by Greg Troxel 4/2/92
* routine callable from xntpd, rather than separate program
* also, key info passed in via a global, so no key file needed.
*/
/*
* xntpres - process configuration entries which require use of the resolver
*
* This is meant to be run by xntpd on the fly. It is not guaranteed
* to work properly if run by hand. This is actually a quick hack to
* stave off violence from people who hate using numbers in the
* configuration file (at least I hope the rest of the daemon is
* better than this). Also might provide some ideas about how one
* might go about autoconfiguring an NTP distribution network.
*
*/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#include <stdio.h>
#include <ctype.h>
#include <sys/types.h>
#include <sys/time.h>
#include <netdb.h>
#include <signal.h>
#include <errno.h>
#include "ntpd.h"
#include "ntp_select.h"
#include "ntp_io.h"
#include "ntp_request.h"
#include "ntp_stdlib.h"
#include "ntp_syslog.h"
#define STREQ(a, b) (*(a) == *(b) && strcmp((a), (b)) == 0)
/*
* Each item we are to resolve and configure gets one of these
* structures defined for it.
*/
struct conf_entry {
struct conf_entry *ce_next;
char *ce_name; /* name we are trying to resolve */
struct conf_peer ce_config; /* configuration info for peer */
};
#define ce_peeraddr ce_config.peeraddr
#define ce_hmode ce_config.hmode
#define ce_version ce_config.version
#define ce_minpoll ce_config.minpoll
#define ce_maxpoll ce_config.maxpoll
#define ce_flags ce_config.flags
#define ce_ttl ce_config.ttl
#define ce_keyid ce_config.keyid
/*
* confentries is a pointer to the list of configuration entries
* we have left to do.
*/
struct conf_entry *confentries = NULL;
/*
* We take an interrupt every thirty seconds, at which time we decrement
* config_timer and resolve_timer. The former is set to 2, so we retry
* unsucessful reconfigurations every minute. The latter is set to
* an exponentially increasing value which starts at 2 and increases to
* 32. When this expires we retry failed name resolutions.
*
* We sleep SLEEPTIME seconds before doing anything, to give the server
* time to arrange itself.
*/
#define MINRESOLVE 2
#define MAXRESOLVE 32
#define CONFIG_TIME 2
#define ALARM_TIME 30
#define SLEEPTIME 2
static volatile int config_timer = 0;
static volatile int resolve_timer = 0;
static int resolve_value; /* next value of resolve timer */
/*
* Big hack attack
*/
#define LOCALHOST 0x7f000001 /* 127.0.0.1, in hex, of course */
#define SKEWTIME 0x08000000 /* 0.03125 seconds as a l_fp fraction */
/*
* Select time out. Set to 2 seconds. The server is on the local machine,
* after all.
*/
#define TIMEOUT_SEC 2
#define TIMEOUT_USEC 0
/*
* Input processing. The data on each line in the configuration file
* is supposed to consist of entries in the following order
*/
#define TOK_HOSTNAME 0
#define TOK_HMODE 1
#define TOK_VERSION 2
#define TOK_MINPOLL 3
#define TOK_MAXPOLL 4
#define TOK_FLAGS 5
#define TOK_TTL 6
#define TOK_KEYID 7
#define NUMTOK 8
#define MAXLINESIZE 512
/*
* File descriptor for ntp request code.
*/
static int sockfd = -1;
/* stuff to be filled in by caller */
u_int32 req_keyid; /* request keyid */
char *req_file; /* name of the file with configuration info */
/* end stuff to be filled in */
extern int debug; /* use global debug flag */
#ifndef SYS_WINNT
extern int errno;
#endif /* SYS_WINNT */
static RETSIGTYPE bong P((int));
static void checkparent P((void));
static void removeentry P((struct conf_entry *));
static void addentry P((char *, int, int, int, int, int, int, u_int32));
static int findhostaddr P((struct conf_entry *));
static void openntp P((void));
static int request P((struct conf_peer *));
static char * nexttoken P((char **));
static void readconf P((FILE *, char *));
static void doconfigure P((int));
/*
* assumes: req_key, req_keyid, conffile valid
* syslog still open
*/
void
ntp_intres()
{
FILE *in;
#ifdef HAVE_SIGSUSPEND
sigset_t set;
sigemptyset(&set);
#endif /* NTP_POSIX_SOURCE */
#ifdef DEBUG
if (debug)
printf("ntp_intres running");
#endif
/* check out auth stuff */
if (!authhavekey(req_keyid)) {
msyslog(LOG_ERR, "request keyid %lu not found",
req_keyid );
exit(1);
}
/*
* Read the configuration info
* {this is bogus, since we are forked, but it is easier
* to keep this code - gdt}
*/
if ((in = fopen(req_file, "r")) == NULL) {
msyslog(LOG_ERR, "can't open configuration file %s: %m",
req_file);
exit(1);
}
readconf(in, req_file);
(void) fclose(in);
if (!debug )
(void) unlink(req_file);
/*
* Sleep a little to make sure the server is completely up
*/
sleep(SLEEPTIME);
/*
* Make a first cut at resolving the bunch
*/
doconfigure(1);
if (confentries == NULL)
exit(0); /* done that quick */
/*
* Here we've got some problem children. Set up the timer
* and wait for it.
*/
resolve_value = resolve_timer = MINRESOLVE;
config_timer = CONFIG_TIME;
#ifndef SYS_WINNT
(void) signal_no_reset(SIGALRM, bong);
alarm(ALARM_TIME);
#endif /* SYS_WINNT */
for (;;) {
if (confentries == NULL)
exit(0);
checkparent();
if (resolve_timer == 0) {
if (resolve_value < MAXRESOLVE)
resolve_value <<= 1;
resolve_timer = resolve_value;
config_timer = CONFIG_TIME;
doconfigure(1);
continue;
} else if (config_timer == 0) {
config_timer = CONFIG_TIME;
doconfigure(0);
continue;
}
#ifndef SYS_WINNT
/*
* There is a race in here. Is okay, though, since
* all it does is delay things by 30 seconds.
*/
#ifdef HAVE_SIGSUSPEND
sigsuspend(&set);
#else
sigpause(0);
#endif /* HAVE_SIGSUSPEND */
#else
if (config_timer > 0)
config_timer--;
if (resolve_timer > 0)
resolve_timer--;
sleep(ALARM_TIME);
#endif /* SYS_WINNT */
}
}
#ifndef SYS_WINNT
/*
* bong - service and reschedule an alarm() interrupt
*/
static RETSIGTYPE
bong(sig)
int sig;
{
if (config_timer > 0)
config_timer--;
if (resolve_timer > 0)
resolve_timer--;
alarm(ALARM_TIME);
}
#endif /* SYS_WINNT */
/*
* checkparent - see if our parent process is still running
*
* No need to worry in the Windows NT environment whether the
* main thread is still running, because if it goes
* down it takes the whole process down with it (in
* which case we won't be running this thread either)
* Turn function into NOP;
*/
static void
checkparent()
{
#if !defined (SYS_WINNT) && !defined (SYS_VXWORKS)
/*
* If our parent (the server) has died we will have been
* inherited by init. If so, exit.
*/
if (getppid() == 1) {
msyslog(LOG_INFO, "parent died before we finished, exiting");
exit(0);
}
#endif /* SYS_WINNT && SYS_VXWORKS*/
}
/*
* removeentry - we are done with an entry, remove it from the list
*/
static void
removeentry(entry)
struct conf_entry *entry;
{
register struct conf_entry *ce;
ce = confentries;
if (ce == entry) {
confentries = ce->ce_next;
return;
}
while (ce != NULL) {
if (ce->ce_next == entry) {
ce->ce_next = entry->ce_next;
return;
}
ce = ce->ce_next;
}
}
/*
* addentry - add an entry to the configuration list
*/
static void
addentry(name, mode, version, minpoll, maxpoll, flags, ttl, keyid)
char *name;
int mode;
int version;
int minpoll;
int maxpoll;
int flags;
int ttl;
u_int32 keyid;
{
register char *cp;
register struct conf_entry *ce;
int len;
len = strlen(name) + 1;
cp = emalloc((unsigned)len);
memmove(cp, name, len);
ce = (struct conf_entry *)emalloc(sizeof(struct conf_entry));
ce->ce_name = cp;
ce->ce_peeraddr = 0;
ce->ce_hmode = (u_char)mode;
ce->ce_version = (u_char)version;
ce->ce_minpoll = (u_char)minpoll;
ce->ce_maxpoll = (u_char)maxpoll;
ce->ce_flags = (u_char)flags;
ce->ce_ttl = (u_char)ttl;
ce->ce_keyid = keyid;
ce->ce_next = NULL;
if (confentries == NULL) {
confentries = ce;
} else {
register struct conf_entry *cep;
for (cep = confentries; cep->ce_next != NULL;
cep = cep->ce_next)
/* nothing */;
cep->ce_next = ce;
}
}
/*
* findhostaddr - resolve a host name into an address
*
* The routine sticks the address into the entry's ce_peeraddr if it
* gets one. It returns 1 for "success" and 0 for an uncorrectable
* failure. Note that "success" includes try again errors. You can
* tell that you got a try again since ce_peeraddr will still be zero.
*/
static int
findhostaddr(entry)
struct conf_entry *entry;
{
struct hostent *hp;
checkparent(); /* make sure our guy is still running */
hp = gethostbyname(entry->ce_name);
if (hp == NULL) {
#ifndef NODNS
/*
* If the resolver is in use, see if the failure is
* temporary. If so, return success.
*/
#ifndef SYS_WINNT
extern int h_errno;
#endif /* SYS_WINNT */
if (h_errno == TRY_AGAIN)
return (1);
#endif
return (0);
}
/*
* Use the first address. We don't have any way to
* tell preferences and older gethostbyname() implementations
* only return one.
*/
memmove((char *)&(entry->ce_peeraddr),
(char *)hp->h_addr,
sizeof(struct in_addr));
return (1);
}
/*
* openntp - open a socket to the ntp server
*/
static void
openntp()
{
struct sockaddr_in saddr;
if (sockfd >= 0)
return;
sockfd = socket(AF_INET, SOCK_DGRAM, 0);
if (sockfd == -1) {
msyslog(LOG_ERR, "socket() failed: %m");
exit(1);
}
memset((char *)&saddr, 0, sizeof(saddr));
saddr.sin_family = AF_INET;
saddr.sin_port = htons(NTP_PORT); /* trash */
saddr.sin_addr.s_addr = htonl(LOCALHOST); /* garbage */
/*
* Make the socket non-blocking. We'll wait with select()
*/
#ifndef SYS_WINNT
#if defined(O_NONBLOCK)
if (fcntl(sockfd, F_SETFL, O_NONBLOCK) == -1) {
msyslog(LOG_ERR, "fcntl(O_NONBLOCK) failed: %m");
exit(1);
}
#else
#if defined(FNDELAY)
if (fcntl(sockfd, F_SETFL, FNDELAY) == -1) {
msyslog(LOG_ERR, "fcntl(FNDELAY) failed: %m");
exit(1);
}
#else
# include "Bletch: NEED NON BLOCKING IO"
#endif /* FNDDELAY */
#endif /* O_NONBLOCK */
#else /* SYS_WINNT */
{
int on=1;
if (ioctlsocket(sockfd,FIONBIO,(u_long *) &on) == SOCKET_ERROR) {
msyslog(LOG_ERR, "ioctlsocket(FIONBIO) fails: %m");
exit(1); /* Windows NT - set socket in non-blocking mode */
}
}
#endif /* SYS_WINNT */
if (connect(sockfd, (struct sockaddr *)&saddr, sizeof(saddr)) == -1) {
msyslog(LOG_ERR, "connect() failed: %m");
exit(1);
}
}
/*
* request - send a configuration request to the server, wait for a response
*/
static int
request(conf)
struct conf_peer *conf;
{
fd_set fdset;
struct timeval tvout;
struct req_pkt reqpkt;
l_fp ts;
int n;
#ifdef SYS_WINNT
HANDLE hReadWriteEvent = NULL;
BOOL ret;
DWORD NumberOfBytesWritten, NumberOfBytesRead, dwWait;
OVERLAPPED overlap;
#endif /* SYS_WINNT */
checkparent(); /* make sure our guy is still running */
if (sockfd < 0)
openntp();
#ifdef SYS_WINNT
hReadWriteEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
#endif /* SYS_WINNT */
/*
* Try to clear out any previously received traffic so it
* doesn't fool us. Note the socket is nonblocking.
*/
tvout.tv_sec = 0;
tvout.tv_usec = 0;
FD_ZERO(&fdset);
FD_SET(sockfd, &fdset);
while (select(sockfd + 1, &fdset, (fd_set *)0, (fd_set *)0, &tvout) >
0) {
recv(sockfd, (char *)&reqpkt, REQ_LEN_MAC, 0);
FD_ZERO(&fdset);
FD_SET(sockfd, &fdset);
}
/*
* Make up a request packet with the configuration info
*/
memset((char *)&reqpkt, 0, sizeof(reqpkt));
reqpkt.rm_vn_mode = RM_VN_MODE(0, 0);
reqpkt.auth_seq = AUTH_SEQ(1, 0); /* authenticated, no seq */
reqpkt.implementation = IMPL_XNTPD; /* local implementation */
reqpkt.request = REQ_CONFIG; /* configure a new peer */
reqpkt.err_nitems = ERR_NITEMS(0, 1); /* one item */
reqpkt.mbz_itemsize = MBZ_ITEMSIZE(sizeof(struct conf_peer));
memmove(reqpkt.data, (char *)conf, sizeof(struct conf_peer));
reqpkt.keyid = htonl(req_keyid);
auth1crypt(req_keyid, (u_int32 *)&reqpkt, REQ_LEN_NOMAC);
get_systime(&ts);
L_ADDUF(&ts, SKEWTIME);
HTONL_FP(&ts, &reqpkt.tstamp);
n = auth2crypt(req_keyid, (u_int32 *)&reqpkt, REQ_LEN_NOMAC);
/*
* Done. Send it.
*/
#ifndef SYS_WINNT
n = send(sockfd, (char *)&reqpkt, REQ_LEN_NOMAC + n, 0);
if (n < 0) {
msyslog(LOG_ERR, "send to NTP server failed: %m");
return 0; /* maybe should exit */
}
#else
/* In the NT world, documentation seems to indicate that there
* exist _write and _read routines that can be used to so blocking
* I/O on sockets. Problem is these routines require a socket
* handle obtained through the _open_osf_handle C run-time API
* of which there is no explanation in the documentation. We need
* nonblocking write's and read's anyway for our purpose here.
* We're therefore forced to deviate a little bit from the Unix
* model here and use the ReadFile and WriteFile Win32 I/O API's
* on the socket
*/
overlap.Offset = overlap.OffsetHigh = (DWORD)0;
overlap.hEvent = hReadWriteEvent;
ret = WriteFile((HANDLE)sockfd, (char *)&reqpkt, REQ_LEN_NOMAC + n,
(LPDWORD)&NumberOfBytesWritten, (LPOVERLAPPED)&overlap);
if ((ret == FALSE) && (GetLastError() != ERROR_IO_PENDING)) {
msyslog(LOG_ERR, "send to NTP server failed: %m");
return 0;
}
dwWait = WaitForSingleObject(hReadWriteEvent, (DWORD) TIMEOUT_SEC * 1000);
if ((dwWait == WAIT_FAILED) || (dwWait == WAIT_TIMEOUT)) {
if (dwWait == WAIT_FAILED)
msyslog(LOG_ERR, "WaitForSingleObject failed: %m");
return 0;
}
#endif /* SYS_WINNT */
/*
* Wait for a response. A weakness of the mode 7 protocol used
* is that there is no way to associate a response with a
* particular request, i.e. the response to this configuration
* request is indistinguishable from that to any other. I should
* fix this some day. In any event, the time out is fairly
* pessimistic to make sure that if an answer is coming back
* at all, we get it.
*/
for (;;) {
FD_ZERO(&fdset);
FD_SET(sockfd, &fdset);
tvout.tv_sec = TIMEOUT_SEC;
tvout.tv_usec = TIMEOUT_USEC;
n = select(sockfd + 1, &fdset, (fd_set *)0,
(fd_set *)0, &tvout);
if (n < 0)
{
msyslog(LOG_ERR, "select() fails: %m");
return 0;
}
else if (n == 0)
{
if(debug)
msyslog(LOG_DEBUG, "select() returned 0.");
return 0;
}
#ifndef SYS_WINNT
n = recv(sockfd, (char *)&reqpkt, REQ_LEN_MAC, 0);
if (n <= 0) {
if (n < 0) {
msyslog(LOG_ERR, "recv() fails: %m");
return 0;
}
continue;
}
#else /* Overlapped I/O used on non-blocking sockets on Windows NT */
ret = ReadFile((HANDLE)sockfd, (char *)&reqpkt, (DWORD)REQ_LEN_MAC,
(LPDWORD)&NumberOfBytesRead, (LPOVERLAPPED)&overlap);
if ((ret == FALSE) && (GetLastError() != ERROR_IO_PENDING)) {
msyslog(LOG_ERR, "ReadFile() fails: %m");
return 0;
}
dwWait = WaitForSingleObject(hReadWriteEvent, (DWORD) TIMEOUT_SEC * 1000);
if ((dwWait == WAIT_FAILED) || (dwWait == WAIT_TIMEOUT)) {
if (dwWait == WAIT_FAILED) {
msyslog(LOG_ERR, "WaitForSingleObject fails: %m");
return 0;
}
continue;
}
n = NumberOfBytesRead;
#endif /* SYS_WINNT */
/*
* Got one. Check through to make sure it is what
* we expect.
*/
if (n < RESP_HEADER_SIZE) {
msyslog(LOG_ERR, "received runt response (%d octets)",
n);
continue;
}
if (!ISRESPONSE(reqpkt.rm_vn_mode)) {
#ifdef DEBUG
if (debug > 1)
printf("received non-response packet\n");
#endif
continue;
}
if (ISMORE(reqpkt.rm_vn_mode)) {
#ifdef DEBUG
if (debug > 1)
printf("received fragmented packet\n");
#endif
continue;
}
if (INFO_VERSION(reqpkt.rm_vn_mode) != NTP_VERSION
|| INFO_MODE(reqpkt.rm_vn_mode) != MODE_PRIVATE) {
#ifdef DEBUG
if (debug > 1)
printf("version (%d) or mode (%d) incorrect\n",
INFO_VERSION(reqpkt.rm_vn_mode),
INFO_MODE(reqpkt.rm_vn_mode));
#endif
continue;
}
if (INFO_SEQ(reqpkt.auth_seq) != 0) {
#ifdef DEBUG
if (debug > 1)
printf("nonzero sequence number (%d)\n",
INFO_SEQ(reqpkt.auth_seq));
#endif
continue;
}
if (reqpkt.implementation != IMPL_XNTPD ||
reqpkt.request != REQ_CONFIG) {
#ifdef DEBUG
if (debug > 1)
printf(
"implementation (%d) or request (%d) incorrect\n",
reqpkt.implementation, reqpkt.request);
#endif
continue;
}
if (INFO_NITEMS(reqpkt.err_nitems) != 0 ||
INFO_MBZ(reqpkt.mbz_itemsize) != 0 ||
INFO_ITEMSIZE(reqpkt.mbz_itemsize) != 0) {
#ifdef DEBUG
if (debug > 1)
printf(
"nitems (%d) mbz (%d) or itemsize (%d) nonzero\n",
INFO_NITEMS(reqpkt.err_nitems),
INFO_MBZ(reqpkt.mbz_itemsize),
INFO_ITEMSIZE(reqpkt.mbz_itemsize));
#endif
continue;
}
n = INFO_ERR(reqpkt.err_nitems);
switch (n) {
case INFO_OKAY:
/* success */
return 1;
case INFO_ERR_IMPL:
msyslog(LOG_ERR,
"server reports implementation mismatch!!");
return 0;
case INFO_ERR_REQ:
msyslog(LOG_ERR,
"server claims configuration request is unknown");
return 0;
case INFO_ERR_FMT:
msyslog(LOG_ERR,
"server indicates a format error occured(!!)");
return 0;
case INFO_ERR_NODATA:
msyslog(LOG_ERR,
"server indicates no data available (shouldn't happen)");
return 0;
case INFO_ERR_AUTH:
msyslog(LOG_ERR,
"server returns a permission denied error");
return 0;
default:
msyslog(LOG_ERR,
"server returns unknown error code %d", n);
return 0;
}
}
}
/*
* nexttoken - return the next token from a line
*/
static char *
nexttoken(lptr)
char **lptr;
{
register char *cp;
register char *tstart;
cp = *lptr;
/*
* Skip leading white space
*/
while (*cp == ' ' || *cp == '\t')
cp++;
/*
* If this is the end of the line, return nothing.
*/
if (*cp == '\n' || *cp == '\0') {
*lptr = cp;
return NULL;
}
/*
* Must be the start of a token. Record the pointer and look
* for the end.
*/
tstart = cp++;
while (*cp != ' ' && *cp != '\t' && *cp != '\n' && *cp != '\0')
cp++;
/*
* Terminate the token with a \0. If this isn't the end of the
* line, space to the next character.
*/
if (*cp == '\n' || *cp == '\0')
*cp = '\0';
else
*cp++ = '\0';
*lptr = cp;
return tstart;
}
/*
* readconf - read the configuration information out of the file we
* were passed. Note that since the file is supposed to be
* machine generated, we bail out at the first sign of trouble.
*/
static void
readconf(fp, name)
FILE *fp;
char *name;
{
register int i;
char *token[NUMTOK];
u_long intval[NUMTOK];
int flags;
char buf[MAXLINESIZE];
char *bp;
while (fgets(buf, MAXLINESIZE, fp) != NULL) {
bp = buf;
for (i = 0; i < NUMTOK; i++) {
if ((token[i] = nexttoken(&bp)) == NULL) {
msyslog(LOG_ERR,
"tokenizing error in file `%s', quitting",
name);
exit(1);
}
}
for (i = 1; i < NUMTOK; i++) {
if (!atouint(token[i], &intval[i])) {
msyslog(LOG_ERR,
"format error for integer token `%s', file `%s', quitting",
token[i], name);
exit(1);
}
}
if (intval[TOK_HMODE] != MODE_ACTIVE &&
intval[TOK_HMODE] != MODE_CLIENT &&
intval[TOK_HMODE] != MODE_BROADCAST) {
msyslog(LOG_ERR, "invalid mode (%d) in file %s",
intval[TOK_HMODE], name);
exit(1);
}
if (intval[TOK_VERSION] > NTP_VERSION ||
intval[TOK_VERSION] < NTP_OLDVERSION) {
msyslog(LOG_ERR, "invalid version (%d) in file %s",
intval[TOK_VERSION], name);
exit(1);
}
if (intval[TOK_MINPOLL] < NTP_MINPOLL ||
intval[TOK_MINPOLL] > NTP_MAXPOLL) {
msyslog(LOG_ERR, "invalid MINPOLL value (%d) in file %s",
intval[TOK_MINPOLL], name);
exit(1);
}
if (intval[TOK_MAXPOLL] < NTP_MINPOLL ||
intval[TOK_MAXPOLL] > NTP_MAXPOLL) {
msyslog(LOG_ERR, "invalid MAXPOLL value (%d) in file %s",
intval[TOK_MAXPOLL], name);
exit(1);
}
if ((intval[TOK_FLAGS] & ~(FLAG_AUTHENABLE|FLAG_PREFER))
!= 0) {
msyslog(LOG_ERR, "invalid flags (%d) in file %s",
intval[TOK_FLAGS], name);
exit(1);
}
flags = 0;
if (intval[TOK_FLAGS] & FLAG_AUTHENABLE)
flags |= CONF_FLAG_AUTHENABLE;
if (intval[TOK_FLAGS] & FLAG_PREFER)
flags |= CONF_FLAG_PREFER;
/*
* This is as good as we can check it. Add it in.
*/
addentry(token[TOK_HOSTNAME], (int)intval[TOK_HMODE],
(int)intval[TOK_VERSION], (int)intval[TOK_MINPOLL],
(int)intval[TOK_MAXPOLL], flags, (int)intval[TOK_TTL],
intval[TOK_KEYID]);
}
}
/*
* doconfigure - attempt to resolve names and configure the server
*/
static void
doconfigure(dores)
int dores;
{
register struct conf_entry *ce;
register struct conf_entry *ceremove;
ce = confentries;
while (ce != NULL) {
if (dores && ce->ce_peeraddr == 0) {
if (!findhostaddr(ce)) {
msyslog(LOG_ERR,
"couldn't resolve `%s', giving up on it",
ce->ce_name);
ceremove = ce;
ce = ceremove->ce_next;
removeentry(ceremove);
continue;
}
}
if (ce->ce_peeraddr != 0) {
if (request(&ce->ce_config)) {
ceremove = ce;
ce = ceremove->ce_next;
removeentry(ceremove);
continue;
}
}
ce = ce->ce_next;
}
}