8e491dbabd
Audio 1 DMA engine by allocating through the ISA DMA tag on amd64 and i386.
2121 lines
56 KiB
C
2121 lines
56 KiB
C
/* $NetBSD: eso.c,v 1.35 2004/07/08 21:33:45 kleink Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1999, 2000, 2004 Klaus J. Klein
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* ESS Technology Inc. Solo-1 PCI AudioDrive (ES1938/1946) device driver.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: eso.c,v 1.35 2004/07/08 21:33:45 kleink Exp $");
|
|
|
|
#include "mpu.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/device.h>
|
|
#include <sys/proc.h>
|
|
|
|
#include <dev/pci/pcidevs.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <sys/audioio.h>
|
|
#include <dev/audio_if.h>
|
|
#include <dev/midi_if.h>
|
|
|
|
#include <dev/mulaw.h>
|
|
#include <dev/auconv.h>
|
|
|
|
#include <dev/ic/mpuvar.h>
|
|
#include <dev/ic/i8237reg.h>
|
|
#include <dev/pci/esoreg.h>
|
|
#include <dev/pci/esovar.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/intr.h>
|
|
|
|
/*
|
|
* XXX Work around the 24-bit implementation limit of the Audio 1 DMA
|
|
* XXX engine by allocating through the ISA DMA tag.
|
|
*/
|
|
#if defined(amd64) || defined(i386)
|
|
#include "isa.h"
|
|
#if NISA > 0
|
|
#include <dev/isa/isavar.h>
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(AUDIO_DEBUG) || defined(DEBUG)
|
|
#define DPRINTF(x) printf x
|
|
#else
|
|
#define DPRINTF(x)
|
|
#endif
|
|
|
|
struct eso_dma {
|
|
bus_dma_tag_t ed_dmat;
|
|
bus_dmamap_t ed_map;
|
|
caddr_t ed_addr;
|
|
bus_dma_segment_t ed_segs[1];
|
|
int ed_nsegs;
|
|
size_t ed_size;
|
|
struct eso_dma * ed_next;
|
|
};
|
|
|
|
#define KVADDR(dma) ((void *)(dma)->ed_addr)
|
|
#define DMAADDR(dma) ((dma)->ed_map->dm_segs[0].ds_addr)
|
|
|
|
/* Autoconfiguration interface */
|
|
static int eso_match __P((struct device *, struct cfdata *, void *));
|
|
static void eso_attach __P((struct device *, struct device *, void *));
|
|
static void eso_defer __P((struct device *));
|
|
static int eso_print __P((void *, const char *));
|
|
|
|
CFATTACH_DECL(eso, sizeof (struct eso_softc),
|
|
eso_match, eso_attach, NULL, NULL);
|
|
|
|
/* PCI interface */
|
|
static int eso_intr __P((void *));
|
|
|
|
/* MI audio layer interface */
|
|
static int eso_open __P((void *, int));
|
|
static void eso_close __P((void *));
|
|
static int eso_query_encoding __P((void *, struct audio_encoding *));
|
|
static int eso_set_params __P((void *, int, int, struct audio_params *,
|
|
struct audio_params *));
|
|
static int eso_round_blocksize __P((void *, int));
|
|
static int eso_halt_output __P((void *));
|
|
static int eso_halt_input __P((void *));
|
|
static int eso_getdev __P((void *, struct audio_device *));
|
|
static int eso_set_port __P((void *, mixer_ctrl_t *));
|
|
static int eso_get_port __P((void *, mixer_ctrl_t *));
|
|
static int eso_query_devinfo __P((void *, mixer_devinfo_t *));
|
|
static void * eso_allocm __P((void *, int, size_t, struct malloc_type *, int));
|
|
static void eso_freem __P((void *, void *, struct malloc_type *));
|
|
static size_t eso_round_buffersize __P((void *, int, size_t));
|
|
static paddr_t eso_mappage __P((void *, void *, off_t, int));
|
|
static int eso_get_props __P((void *));
|
|
static int eso_trigger_output __P((void *, void *, void *, int,
|
|
void (*)(void *), void *, struct audio_params *));
|
|
static int eso_trigger_input __P((void *, void *, void *, int,
|
|
void (*)(void *), void *, struct audio_params *));
|
|
|
|
static struct audio_hw_if eso_hw_if = {
|
|
eso_open,
|
|
eso_close,
|
|
NULL, /* drain */
|
|
eso_query_encoding,
|
|
eso_set_params,
|
|
eso_round_blocksize,
|
|
NULL, /* commit_settings */
|
|
NULL, /* init_output */
|
|
NULL, /* init_input */
|
|
NULL, /* start_output */
|
|
NULL, /* start_input */
|
|
eso_halt_output,
|
|
eso_halt_input,
|
|
NULL, /* speaker_ctl */
|
|
eso_getdev,
|
|
NULL, /* setfd */
|
|
eso_set_port,
|
|
eso_get_port,
|
|
eso_query_devinfo,
|
|
eso_allocm,
|
|
eso_freem,
|
|
eso_round_buffersize,
|
|
eso_mappage,
|
|
eso_get_props,
|
|
eso_trigger_output,
|
|
eso_trigger_input,
|
|
NULL, /* dev_ioctl */
|
|
};
|
|
|
|
static const char * const eso_rev2model[] = {
|
|
"ES1938",
|
|
"ES1946",
|
|
"ES1946 Revision E"
|
|
};
|
|
|
|
|
|
/*
|
|
* Utility routines
|
|
*/
|
|
/* Register access etc. */
|
|
static uint8_t eso_read_ctlreg __P((struct eso_softc *, uint8_t));
|
|
static uint8_t eso_read_mixreg __P((struct eso_softc *, uint8_t));
|
|
static uint8_t eso_read_rdr __P((struct eso_softc *));
|
|
static void eso_reload_master_vol __P((struct eso_softc *));
|
|
static int eso_reset __P((struct eso_softc *));
|
|
static void eso_set_gain __P((struct eso_softc *, unsigned int));
|
|
static int eso_set_recsrc __P((struct eso_softc *, unsigned int));
|
|
static int eso_set_monooutsrc __P((struct eso_softc *, unsigned int));
|
|
static int eso_set_monoinbypass __P((struct eso_softc *, unsigned int));
|
|
static int eso_set_preamp __P((struct eso_softc *, unsigned int));
|
|
static void eso_write_cmd __P((struct eso_softc *, uint8_t));
|
|
static void eso_write_ctlreg __P((struct eso_softc *, uint8_t, uint8_t));
|
|
static void eso_write_mixreg __P((struct eso_softc *, uint8_t, uint8_t));
|
|
/* DMA memory allocation */
|
|
static int eso_allocmem __P((struct eso_softc *, size_t, size_t, size_t,
|
|
int, int, struct eso_dma *));
|
|
static void eso_freemem __P((struct eso_dma *));
|
|
|
|
|
|
static int
|
|
eso_match(parent, match, aux)
|
|
struct device *parent;
|
|
struct cfdata *match;
|
|
void *aux;
|
|
{
|
|
struct pci_attach_args *pa = aux;
|
|
|
|
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_ESSTECH &&
|
|
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ESSTECH_SOLO1)
|
|
return (1);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
eso_attach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct eso_softc *sc = (struct eso_softc *)self;
|
|
struct pci_attach_args *pa = aux;
|
|
struct audio_attach_args aa;
|
|
pci_intr_handle_t ih;
|
|
bus_addr_t vcbase;
|
|
const char *intrstring;
|
|
int idx;
|
|
uint8_t a2mode, mvctl;
|
|
|
|
aprint_naive(": Audio controller\n");
|
|
|
|
sc->sc_revision = PCI_REVISION(pa->pa_class);
|
|
|
|
aprint_normal(": ESS Solo-1 PCI AudioDrive ");
|
|
if (sc->sc_revision <
|
|
sizeof (eso_rev2model) / sizeof (eso_rev2model[0]))
|
|
aprint_normal("%s\n", eso_rev2model[sc->sc_revision]);
|
|
else
|
|
aprint_normal("(unknown rev. 0x%02x)\n", sc->sc_revision);
|
|
|
|
/* Map I/O registers. */
|
|
if (pci_mapreg_map(pa, ESO_PCI_BAR_IO, PCI_MAPREG_TYPE_IO, 0,
|
|
&sc->sc_iot, &sc->sc_ioh, NULL, NULL)) {
|
|
aprint_error("%s: can't map I/O space\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
if (pci_mapreg_map(pa, ESO_PCI_BAR_SB, PCI_MAPREG_TYPE_IO, 0,
|
|
&sc->sc_sb_iot, &sc->sc_sb_ioh, NULL, NULL)) {
|
|
aprint_error("%s: can't map SB I/O space\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
if (pci_mapreg_map(pa, ESO_PCI_BAR_VC, PCI_MAPREG_TYPE_IO, 0,
|
|
&sc->sc_dmac_iot, &sc->sc_dmac_ioh, &vcbase, &sc->sc_vcsize)) {
|
|
aprint_error("%s: can't map VC I/O space\n",
|
|
sc->sc_dev.dv_xname);
|
|
/* Don't bail out yet: we can map it later, see below. */
|
|
vcbase = 0;
|
|
sc->sc_vcsize = 0x10; /* From the data sheet. */
|
|
}
|
|
if (pci_mapreg_map(pa, ESO_PCI_BAR_MPU, PCI_MAPREG_TYPE_IO, 0,
|
|
&sc->sc_mpu_iot, &sc->sc_mpu_ioh, NULL, NULL)) {
|
|
aprint_error("%s: can't map MPU I/O space\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
if (pci_mapreg_map(pa, ESO_PCI_BAR_GAME, PCI_MAPREG_TYPE_IO, 0,
|
|
&sc->sc_game_iot, &sc->sc_game_ioh, NULL, NULL)) {
|
|
aprint_error("%s: can't map Game I/O space\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
sc->sc_dmat = pa->pa_dmat;
|
|
sc->sc_dmas = NULL;
|
|
sc->sc_dmac_configured = 0;
|
|
|
|
/* Enable bus mastering. */
|
|
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
|
|
pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG) |
|
|
PCI_COMMAND_MASTER_ENABLE);
|
|
|
|
/* Reset the device; bail out upon failure. */
|
|
if (eso_reset(sc) != 0) {
|
|
aprint_error("%s: can't reset\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
/* Select the DMA/IRQ policy: DDMA, ISA IRQ emulation disabled. */
|
|
pci_conf_write(pa->pa_pc, pa->pa_tag, ESO_PCI_S1C,
|
|
pci_conf_read(pa->pa_pc, pa->pa_tag, ESO_PCI_S1C) &
|
|
~(ESO_PCI_S1C_IRQP_MASK | ESO_PCI_S1C_DMAP_MASK));
|
|
|
|
/* Enable the relevant (DMA) interrupts. */
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, ESO_IO_IRQCTL,
|
|
ESO_IO_IRQCTL_A1IRQ | ESO_IO_IRQCTL_A2IRQ | ESO_IO_IRQCTL_HVIRQ |
|
|
ESO_IO_IRQCTL_MPUIRQ);
|
|
|
|
/* Set up A1's sample rate generator for new-style parameters. */
|
|
a2mode = eso_read_mixreg(sc, ESO_MIXREG_A2MODE);
|
|
a2mode |= ESO_MIXREG_A2MODE_NEWA1 | ESO_MIXREG_A2MODE_ASYNC;
|
|
eso_write_mixreg(sc, ESO_MIXREG_A2MODE, a2mode);
|
|
|
|
/* Slave Master Volume to Hardware Volume Control Counter, unmask IRQ.*/
|
|
mvctl = eso_read_mixreg(sc, ESO_MIXREG_MVCTL);
|
|
mvctl &= ~ESO_MIXREG_MVCTL_SPLIT;
|
|
mvctl |= ESO_MIXREG_MVCTL_HVIRQM;
|
|
eso_write_mixreg(sc, ESO_MIXREG_MVCTL, mvctl);
|
|
|
|
/* Set mixer regs to something reasonable, needs work. */
|
|
sc->sc_recmon = sc->sc_spatializer = sc->sc_mvmute = 0;
|
|
eso_set_monooutsrc(sc, ESO_MIXREG_MPM_MOMUTE);
|
|
eso_set_monoinbypass(sc, 0);
|
|
eso_set_preamp(sc, 1);
|
|
for (idx = 0; idx < ESO_NGAINDEVS; idx++) {
|
|
int v;
|
|
|
|
switch (idx) {
|
|
case ESO_MIC_PLAY_VOL:
|
|
case ESO_LINE_PLAY_VOL:
|
|
case ESO_CD_PLAY_VOL:
|
|
case ESO_MONO_PLAY_VOL:
|
|
case ESO_AUXB_PLAY_VOL:
|
|
case ESO_DAC_REC_VOL:
|
|
case ESO_LINE_REC_VOL:
|
|
case ESO_SYNTH_REC_VOL:
|
|
case ESO_CD_REC_VOL:
|
|
case ESO_MONO_REC_VOL:
|
|
case ESO_AUXB_REC_VOL:
|
|
case ESO_SPATIALIZER:
|
|
v = 0;
|
|
break;
|
|
case ESO_MASTER_VOL:
|
|
v = ESO_GAIN_TO_6BIT(AUDIO_MAX_GAIN / 2);
|
|
break;
|
|
default:
|
|
v = ESO_GAIN_TO_4BIT(AUDIO_MAX_GAIN / 2);
|
|
break;
|
|
}
|
|
sc->sc_gain[idx][ESO_LEFT] = sc->sc_gain[idx][ESO_RIGHT] = v;
|
|
eso_set_gain(sc, idx);
|
|
}
|
|
eso_set_recsrc(sc, ESO_MIXREG_ERS_MIC);
|
|
|
|
/* Map and establish the interrupt. */
|
|
if (pci_intr_map(pa, &ih)) {
|
|
aprint_error("%s: couldn't map interrupt\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
intrstring = pci_intr_string(pa->pa_pc, ih);
|
|
sc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_AUDIO, eso_intr, sc);
|
|
if (sc->sc_ih == NULL) {
|
|
aprint_error("%s: couldn't establish interrupt",
|
|
sc->sc_dev.dv_xname);
|
|
if (intrstring != NULL)
|
|
aprint_normal(" at %s", intrstring);
|
|
aprint_normal("\n");
|
|
return;
|
|
}
|
|
aprint_normal("%s: interrupting at %s\n", sc->sc_dev.dv_xname,
|
|
intrstring);
|
|
|
|
/*
|
|
* Set up the DDMA Control register; a suitable I/O region has been
|
|
* supposedly mapped in the VC base address register.
|
|
*
|
|
* The Solo-1 has an ... interesting silicon bug that causes it to
|
|
* not respond to I/O space accesses to the Audio 1 DMA controller
|
|
* if the latter's mapping base address is aligned on a 1K boundary.
|
|
* As a consequence, it is quite possible for the mapping provided
|
|
* in the VC BAR to be useless. To work around this, we defer this
|
|
* part until all autoconfiguration on our parent bus is completed
|
|
* and then try to map it ourselves in fulfillment of the constraint.
|
|
*
|
|
* According to the register map we may write to the low 16 bits
|
|
* only, but experimenting has shown we're safe.
|
|
* -kjk
|
|
*/
|
|
if (ESO_VALID_DDMAC_BASE(vcbase)) {
|
|
pci_conf_write(pa->pa_pc, pa->pa_tag, ESO_PCI_DDMAC,
|
|
vcbase | ESO_PCI_DDMAC_DE);
|
|
sc->sc_dmac_configured = 1;
|
|
|
|
aprint_normal(
|
|
"%s: mapping Audio 1 DMA using VC I/O space at 0x%lx\n",
|
|
sc->sc_dev.dv_xname, (unsigned long)vcbase);
|
|
} else {
|
|
DPRINTF(("%s: VC I/O space at 0x%lx not suitable, deferring\n",
|
|
sc->sc_dev.dv_xname, (unsigned long)vcbase));
|
|
sc->sc_pa = *pa;
|
|
config_defer(self, eso_defer);
|
|
}
|
|
|
|
audio_attach_mi(&eso_hw_if, sc, &sc->sc_dev);
|
|
|
|
aa.type = AUDIODEV_TYPE_OPL;
|
|
aa.hwif = NULL;
|
|
aa.hdl = NULL;
|
|
(void)config_found(&sc->sc_dev, &aa, audioprint);
|
|
|
|
aa.type = AUDIODEV_TYPE_MPU;
|
|
aa.hwif = NULL;
|
|
aa.hdl = NULL;
|
|
sc->sc_mpudev = config_found(&sc->sc_dev, &aa, audioprint);
|
|
if (sc->sc_mpudev != NULL) {
|
|
/* Unmask the MPU irq. */
|
|
mvctl = eso_read_mixreg(sc, ESO_MIXREG_MVCTL);
|
|
mvctl |= ESO_MIXREG_MVCTL_MPUIRQM;
|
|
eso_write_mixreg(sc, ESO_MIXREG_MVCTL, mvctl);
|
|
}
|
|
|
|
aa.type = AUDIODEV_TYPE_AUX;
|
|
aa.hwif = NULL;
|
|
aa.hdl = NULL;
|
|
(void)config_found(&sc->sc_dev, &aa, eso_print);
|
|
}
|
|
|
|
static void
|
|
eso_defer(self)
|
|
struct device *self;
|
|
{
|
|
struct eso_softc *sc = (struct eso_softc *)self;
|
|
struct pci_attach_args *pa = &sc->sc_pa;
|
|
bus_addr_t addr, start;
|
|
|
|
aprint_normal("%s: ", sc->sc_dev.dv_xname);
|
|
|
|
/*
|
|
* This is outright ugly, but since we must not make assumptions
|
|
* on the underlying allocator's behaviour it's the most straight-
|
|
* forward way to implement it. Note that we skip over the first
|
|
* 1K region, which is typically occupied by an attached ISA bus.
|
|
*/
|
|
for (start = 0x0400; start < 0xffff; start += 0x0400) {
|
|
if (bus_space_alloc(sc->sc_iot,
|
|
start + sc->sc_vcsize, start + 0x0400 - 1,
|
|
sc->sc_vcsize, sc->sc_vcsize, 0, 0, &addr,
|
|
&sc->sc_dmac_ioh) != 0)
|
|
continue;
|
|
|
|
pci_conf_write(pa->pa_pc, pa->pa_tag, ESO_PCI_DDMAC,
|
|
addr | ESO_PCI_DDMAC_DE);
|
|
sc->sc_dmac_iot = sc->sc_iot;
|
|
sc->sc_dmac_configured = 1;
|
|
aprint_normal("mapping Audio 1 DMA using I/O space at 0x%lx\n",
|
|
(unsigned long)addr);
|
|
|
|
return;
|
|
}
|
|
|
|
aprint_error("can't map Audio 1 DMA into I/O space\n");
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
eso_print(aux, pnp)
|
|
void *aux;
|
|
const char *pnp;
|
|
{
|
|
|
|
/* Only joys can attach via this; easy. */
|
|
if (pnp)
|
|
aprint_normal("joy at %s:", pnp);
|
|
|
|
return (UNCONF);
|
|
}
|
|
|
|
static void
|
|
eso_write_cmd(sc, cmd)
|
|
struct eso_softc *sc;
|
|
uint8_t cmd;
|
|
{
|
|
int i;
|
|
|
|
/* Poll for busy indicator to become clear. */
|
|
for (i = 0; i < ESO_WDR_TIMEOUT; i++) {
|
|
if ((bus_space_read_1(sc->sc_sb_iot, sc->sc_sb_ioh, ESO_SB_RSR)
|
|
& ESO_SB_RSR_BUSY) == 0) {
|
|
bus_space_write_1(sc->sc_sb_iot, sc->sc_sb_ioh,
|
|
ESO_SB_WDR, cmd);
|
|
return;
|
|
} else {
|
|
delay(10);
|
|
}
|
|
}
|
|
|
|
printf("%s: WDR timeout\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
/* Write to a controller register */
|
|
static void
|
|
eso_write_ctlreg(sc, reg, val)
|
|
struct eso_softc *sc;
|
|
uint8_t reg, val;
|
|
{
|
|
|
|
/* DPRINTF(("ctlreg 0x%02x = 0x%02x\n", reg, val)); */
|
|
|
|
eso_write_cmd(sc, reg);
|
|
eso_write_cmd(sc, val);
|
|
}
|
|
|
|
/* Read out the Read Data Register */
|
|
static uint8_t
|
|
eso_read_rdr(sc)
|
|
struct eso_softc *sc;
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ESO_RDR_TIMEOUT; i++) {
|
|
if (bus_space_read_1(sc->sc_sb_iot, sc->sc_sb_ioh,
|
|
ESO_SB_RBSR) & ESO_SB_RBSR_RDAV) {
|
|
return (bus_space_read_1(sc->sc_sb_iot,
|
|
sc->sc_sb_ioh, ESO_SB_RDR));
|
|
} else {
|
|
delay(10);
|
|
}
|
|
}
|
|
|
|
printf("%s: RDR timeout\n", sc->sc_dev.dv_xname);
|
|
return (-1);
|
|
}
|
|
|
|
|
|
static uint8_t
|
|
eso_read_ctlreg(sc, reg)
|
|
struct eso_softc *sc;
|
|
uint8_t reg;
|
|
{
|
|
|
|
eso_write_cmd(sc, ESO_CMD_RCR);
|
|
eso_write_cmd(sc, reg);
|
|
return (eso_read_rdr(sc));
|
|
}
|
|
|
|
static void
|
|
eso_write_mixreg(sc, reg, val)
|
|
struct eso_softc *sc;
|
|
uint8_t reg, val;
|
|
{
|
|
int s;
|
|
|
|
/* DPRINTF(("mixreg 0x%02x = 0x%02x\n", reg, val)); */
|
|
|
|
s = splaudio();
|
|
bus_space_write_1(sc->sc_sb_iot, sc->sc_sb_ioh, ESO_SB_MIXERADDR, reg);
|
|
bus_space_write_1(sc->sc_sb_iot, sc->sc_sb_ioh, ESO_SB_MIXERDATA, val);
|
|
splx(s);
|
|
}
|
|
|
|
static uint8_t
|
|
eso_read_mixreg(sc, reg)
|
|
struct eso_softc *sc;
|
|
uint8_t reg;
|
|
{
|
|
int s;
|
|
uint8_t val;
|
|
|
|
s = splaudio();
|
|
bus_space_write_1(sc->sc_sb_iot, sc->sc_sb_ioh, ESO_SB_MIXERADDR, reg);
|
|
val = bus_space_read_1(sc->sc_sb_iot, sc->sc_sb_ioh, ESO_SB_MIXERDATA);
|
|
splx(s);
|
|
|
|
return (val);
|
|
}
|
|
|
|
static int
|
|
eso_intr(hdl)
|
|
void *hdl;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
uint8_t irqctl;
|
|
|
|
irqctl = bus_space_read_1(sc->sc_iot, sc->sc_ioh, ESO_IO_IRQCTL);
|
|
|
|
/* If it wasn't ours, that's all she wrote. */
|
|
if ((irqctl & (ESO_IO_IRQCTL_A1IRQ | ESO_IO_IRQCTL_A2IRQ |
|
|
ESO_IO_IRQCTL_HVIRQ | ESO_IO_IRQCTL_MPUIRQ)) == 0)
|
|
return (0);
|
|
|
|
if (irqctl & ESO_IO_IRQCTL_A1IRQ) {
|
|
/* Clear interrupt. */
|
|
(void)bus_space_read_1(sc->sc_sb_iot, sc->sc_sb_ioh,
|
|
ESO_SB_RBSR);
|
|
|
|
if (sc->sc_rintr)
|
|
sc->sc_rintr(sc->sc_rarg);
|
|
else
|
|
wakeup(&sc->sc_rintr);
|
|
}
|
|
|
|
if (irqctl & ESO_IO_IRQCTL_A2IRQ) {
|
|
/*
|
|
* Clear the A2 IRQ latch: the cached value reflects the
|
|
* current DAC settings with the IRQ latch bit not set.
|
|
*/
|
|
eso_write_mixreg(sc, ESO_MIXREG_A2C2, sc->sc_a2c2);
|
|
|
|
if (sc->sc_pintr)
|
|
sc->sc_pintr(sc->sc_parg);
|
|
else
|
|
wakeup(&sc->sc_pintr);
|
|
}
|
|
|
|
if (irqctl & ESO_IO_IRQCTL_HVIRQ) {
|
|
/* Clear interrupt. */
|
|
eso_write_mixreg(sc, ESO_MIXREG_CHVIR, ESO_MIXREG_CHVIR_CHVIR);
|
|
|
|
/*
|
|
* Raise a flag to cause a lazy update of the in-softc gain
|
|
* values the next time the software mixer is read to keep
|
|
* interrupt service cost low. ~0 cannot occur otherwise
|
|
* as the master volume has a precision of 6 bits only.
|
|
*/
|
|
sc->sc_gain[ESO_MASTER_VOL][ESO_LEFT] = (uint8_t)~0;
|
|
}
|
|
|
|
#if NMPU > 0
|
|
if ((irqctl & ESO_IO_IRQCTL_MPUIRQ) && sc->sc_mpudev != NULL)
|
|
mpu_intr(sc->sc_mpudev);
|
|
#endif
|
|
|
|
return (1);
|
|
}
|
|
|
|
/* Perform a software reset, including DMA FIFOs. */
|
|
static int
|
|
eso_reset(sc)
|
|
struct eso_softc *sc;
|
|
{
|
|
int i;
|
|
|
|
bus_space_write_1(sc->sc_sb_iot, sc->sc_sb_ioh, ESO_SB_RESET,
|
|
ESO_SB_RESET_SW | ESO_SB_RESET_FIFO);
|
|
/* `Delay' suggested in the data sheet. */
|
|
(void)bus_space_read_1(sc->sc_sb_iot, sc->sc_sb_ioh, ESO_SB_STATUS);
|
|
bus_space_write_1(sc->sc_sb_iot, sc->sc_sb_ioh, ESO_SB_RESET, 0);
|
|
|
|
/* Wait for reset to take effect. */
|
|
for (i = 0; i < ESO_RESET_TIMEOUT; i++) {
|
|
/* Poll for data to become available. */
|
|
if ((bus_space_read_1(sc->sc_sb_iot, sc->sc_sb_ioh,
|
|
ESO_SB_RBSR) & ESO_SB_RBSR_RDAV) != 0 &&
|
|
bus_space_read_1(sc->sc_sb_iot, sc->sc_sb_ioh,
|
|
ESO_SB_RDR) == ESO_SB_RDR_RESETMAGIC) {
|
|
|
|
/* Activate Solo-1 extension commands. */
|
|
eso_write_cmd(sc, ESO_CMD_EXTENB);
|
|
/* Reset mixer registers. */
|
|
eso_write_mixreg(sc, ESO_MIXREG_RESET,
|
|
ESO_MIXREG_RESET_RESET);
|
|
|
|
return (0);
|
|
} else {
|
|
delay(1000);
|
|
}
|
|
}
|
|
|
|
printf("%s: reset timeout\n", sc->sc_dev.dv_xname);
|
|
return (-1);
|
|
}
|
|
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
eso_open(hdl, flags)
|
|
void *hdl;
|
|
int flags;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
|
|
DPRINTF(("%s: open\n", sc->sc_dev.dv_xname));
|
|
|
|
sc->sc_pintr = NULL;
|
|
sc->sc_rintr = NULL;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
eso_close(hdl)
|
|
void *hdl;
|
|
{
|
|
|
|
DPRINTF(("%s: close\n", ((struct eso_softc *)hdl)->sc_dev.dv_xname));
|
|
}
|
|
|
|
static int
|
|
eso_query_encoding(hdl, fp)
|
|
void *hdl;
|
|
struct audio_encoding *fp;
|
|
{
|
|
|
|
switch (fp->index) {
|
|
case 0:
|
|
strcpy(fp->name, AudioEulinear);
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR;
|
|
fp->precision = 8;
|
|
fp->flags = 0;
|
|
break;
|
|
case 1:
|
|
strcpy(fp->name, AudioEmulaw);
|
|
fp->encoding = AUDIO_ENCODING_ULAW;
|
|
fp->precision = 8;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
break;
|
|
case 2:
|
|
strcpy(fp->name, AudioEalaw);
|
|
fp->encoding = AUDIO_ENCODING_ALAW;
|
|
fp->precision = 8;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
break;
|
|
case 3:
|
|
strcpy(fp->name, AudioEslinear);
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR;
|
|
fp->precision = 8;
|
|
fp->flags = 0;
|
|
break;
|
|
case 4:
|
|
strcpy(fp->name, AudioEslinear_le);
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR_LE;
|
|
fp->precision = 16;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
break;
|
|
case 5:
|
|
strcpy(fp->name, AudioEulinear_le);
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR_LE;
|
|
fp->precision = 16;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
break;
|
|
case 6:
|
|
strcpy(fp->name, AudioEslinear_be);
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR_BE;
|
|
fp->precision = 16;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
break;
|
|
case 7:
|
|
strcpy(fp->name, AudioEulinear_be);
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR_BE;
|
|
fp->precision = 16;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
eso_set_params(hdl, setmode, usemode, play, rec)
|
|
void *hdl;
|
|
int setmode, usemode;
|
|
struct audio_params *play, *rec;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
struct audio_params *p;
|
|
int mode, r[2], rd[2], clk;
|
|
unsigned int srg, fltdiv;
|
|
|
|
for (mode = AUMODE_RECORD; mode != -1;
|
|
mode = mode == AUMODE_RECORD ? AUMODE_PLAY : -1) {
|
|
if ((setmode & mode) == 0)
|
|
continue;
|
|
|
|
p = (mode == AUMODE_PLAY) ? play : rec;
|
|
|
|
if (p->sample_rate < ESO_MINRATE ||
|
|
p->sample_rate > ESO_MAXRATE ||
|
|
(p->precision != 8 && p->precision != 16) ||
|
|
(p->channels != 1 && p->channels != 2))
|
|
return (EINVAL);
|
|
|
|
p->factor = 1;
|
|
p->sw_code = NULL;
|
|
switch (p->encoding) {
|
|
case AUDIO_ENCODING_SLINEAR_BE:
|
|
case AUDIO_ENCODING_ULINEAR_BE:
|
|
if (mode == AUMODE_PLAY && p->precision == 16)
|
|
p->sw_code = swap_bytes;
|
|
break;
|
|
case AUDIO_ENCODING_SLINEAR_LE:
|
|
case AUDIO_ENCODING_ULINEAR_LE:
|
|
if (mode == AUMODE_RECORD && p->precision == 16)
|
|
p->sw_code = swap_bytes;
|
|
break;
|
|
case AUDIO_ENCODING_ULAW:
|
|
if (mode == AUMODE_PLAY) {
|
|
p->factor = 2;
|
|
p->sw_code = mulaw_to_ulinear16_le;
|
|
} else {
|
|
p->sw_code = ulinear8_to_mulaw;
|
|
}
|
|
break;
|
|
case AUDIO_ENCODING_ALAW:
|
|
if (mode == AUMODE_PLAY) {
|
|
p->factor = 2;
|
|
p->sw_code = alaw_to_ulinear16_le;
|
|
} else {
|
|
p->sw_code = ulinear8_to_alaw;
|
|
}
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
/*
|
|
* We'll compute both possible sample rate dividers and pick
|
|
* the one with the least error.
|
|
*/
|
|
#define ABS(x) ((x) < 0 ? -(x) : (x))
|
|
r[0] = ESO_CLK0 /
|
|
(128 - (rd[0] = 128 - ESO_CLK0 / p->sample_rate));
|
|
r[1] = ESO_CLK1 /
|
|
(128 - (rd[1] = 128 - ESO_CLK1 / p->sample_rate));
|
|
|
|
clk = ABS(p->sample_rate - r[0]) > ABS(p->sample_rate - r[1]);
|
|
srg = rd[clk] | (clk == 1 ? ESO_CLK1_SELECT : 0x00);
|
|
|
|
/* Roll-off frequency of 87%, as in the ES1888 driver. */
|
|
fltdiv = 256 - 200279L / r[clk];
|
|
|
|
/* Update to reflect the possibly inexact rate. */
|
|
p->sample_rate = r[clk];
|
|
|
|
if (mode == AUMODE_RECORD) {
|
|
/* Audio 1 */
|
|
DPRINTF(("A1 srg 0x%02x fdiv 0x%02x\n", srg, fltdiv));
|
|
eso_write_ctlreg(sc, ESO_CTLREG_SRG, srg);
|
|
eso_write_ctlreg(sc, ESO_CTLREG_FLTDIV, fltdiv);
|
|
} else {
|
|
/* Audio 2 */
|
|
DPRINTF(("A2 srg 0x%02x fdiv 0x%02x\n", srg, fltdiv));
|
|
eso_write_mixreg(sc, ESO_MIXREG_A2SRG, srg);
|
|
eso_write_mixreg(sc, ESO_MIXREG_A2FLTDIV, fltdiv);
|
|
}
|
|
#undef ABS
|
|
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
eso_round_blocksize(hdl, blk)
|
|
void *hdl;
|
|
int blk;
|
|
{
|
|
|
|
return (blk & -32); /* keep good alignment; at least 16 req'd */
|
|
}
|
|
|
|
static int
|
|
eso_halt_output(hdl)
|
|
void *hdl;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
int error, s;
|
|
|
|
DPRINTF(("%s: halt_output\n", sc->sc_dev.dv_xname));
|
|
|
|
/*
|
|
* Disable auto-initialize DMA, allowing the FIFO to drain and then
|
|
* stop. The interrupt callback pointer is cleared at this
|
|
* point so that an outstanding FIFO interrupt for the remaining data
|
|
* will be acknowledged without further processing.
|
|
*
|
|
* This does not immediately `abort' an operation in progress (c.f.
|
|
* audio(9)) but is the method to leave the FIFO behind in a clean
|
|
* state with the least hair. (Besides, that item needs to be
|
|
* rephrased for trigger_*()-based DMA environments.)
|
|
*/
|
|
s = splaudio();
|
|
eso_write_mixreg(sc, ESO_MIXREG_A2C1,
|
|
ESO_MIXREG_A2C1_FIFOENB | ESO_MIXREG_A2C1_DMAENB);
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, ESO_IO_A2DMAM,
|
|
ESO_IO_A2DMAM_DMAENB);
|
|
|
|
sc->sc_pintr = NULL;
|
|
error = tsleep(&sc->sc_pintr, PCATCH | PWAIT, "esoho", sc->sc_pdrain);
|
|
splx(s);
|
|
|
|
/* Shut down DMA completely. */
|
|
eso_write_mixreg(sc, ESO_MIXREG_A2C1, 0);
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, ESO_IO_A2DMAM, 0);
|
|
|
|
return (error == EWOULDBLOCK ? 0 : error);
|
|
}
|
|
|
|
static int
|
|
eso_halt_input(hdl)
|
|
void *hdl;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
int error, s;
|
|
|
|
DPRINTF(("%s: halt_input\n", sc->sc_dev.dv_xname));
|
|
|
|
/* Just like eso_halt_output(), but for Audio 1. */
|
|
s = splaudio();
|
|
eso_write_ctlreg(sc, ESO_CTLREG_A1C2,
|
|
ESO_CTLREG_A1C2_READ | ESO_CTLREG_A1C2_ADC |
|
|
ESO_CTLREG_A1C2_DMAENB);
|
|
bus_space_write_1(sc->sc_dmac_iot, sc->sc_dmac_ioh, ESO_DMAC_MODE,
|
|
DMA37MD_WRITE | DMA37MD_DEMAND);
|
|
|
|
sc->sc_rintr = NULL;
|
|
error = tsleep(&sc->sc_rintr, PCATCH | PWAIT, "esohi", sc->sc_rdrain);
|
|
splx(s);
|
|
|
|
/* Shut down DMA completely. */
|
|
eso_write_ctlreg(sc, ESO_CTLREG_A1C2,
|
|
ESO_CTLREG_A1C2_READ | ESO_CTLREG_A1C2_ADC);
|
|
bus_space_write_1(sc->sc_dmac_iot, sc->sc_dmac_ioh, ESO_DMAC_MASK,
|
|
ESO_DMAC_MASK_MASK);
|
|
|
|
return (error == EWOULDBLOCK ? 0 : error);
|
|
}
|
|
|
|
static int
|
|
eso_getdev(hdl, retp)
|
|
void *hdl;
|
|
struct audio_device *retp;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
|
|
strncpy(retp->name, "ESS Solo-1", sizeof (retp->name));
|
|
snprintf(retp->version, sizeof (retp->version), "0x%02x",
|
|
sc->sc_revision);
|
|
if (sc->sc_revision <
|
|
sizeof (eso_rev2model) / sizeof (eso_rev2model[0]))
|
|
strncpy(retp->config, eso_rev2model[sc->sc_revision],
|
|
sizeof (retp->config));
|
|
else
|
|
strncpy(retp->config, "unknown", sizeof (retp->config));
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
eso_set_port(hdl, cp)
|
|
void *hdl;
|
|
mixer_ctrl_t *cp;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
unsigned int lgain, rgain;
|
|
uint8_t tmp;
|
|
|
|
switch (cp->dev) {
|
|
case ESO_DAC_PLAY_VOL:
|
|
case ESO_MIC_PLAY_VOL:
|
|
case ESO_LINE_PLAY_VOL:
|
|
case ESO_SYNTH_PLAY_VOL:
|
|
case ESO_CD_PLAY_VOL:
|
|
case ESO_AUXB_PLAY_VOL:
|
|
case ESO_RECORD_VOL:
|
|
case ESO_DAC_REC_VOL:
|
|
case ESO_MIC_REC_VOL:
|
|
case ESO_LINE_REC_VOL:
|
|
case ESO_SYNTH_REC_VOL:
|
|
case ESO_CD_REC_VOL:
|
|
case ESO_AUXB_REC_VOL:
|
|
if (cp->type != AUDIO_MIXER_VALUE)
|
|
return (EINVAL);
|
|
|
|
/*
|
|
* Stereo-capable mixer ports: if we get a single-channel
|
|
* gain value passed in, then we duplicate it to both left
|
|
* and right channels.
|
|
*/
|
|
switch (cp->un.value.num_channels) {
|
|
case 1:
|
|
lgain = rgain = ESO_GAIN_TO_4BIT(
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO]);
|
|
break;
|
|
case 2:
|
|
lgain = ESO_GAIN_TO_4BIT(
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT]);
|
|
rgain = ESO_GAIN_TO_4BIT(
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT]);
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
sc->sc_gain[cp->dev][ESO_LEFT] = lgain;
|
|
sc->sc_gain[cp->dev][ESO_RIGHT] = rgain;
|
|
eso_set_gain(sc, cp->dev);
|
|
break;
|
|
|
|
case ESO_MASTER_VOL:
|
|
if (cp->type != AUDIO_MIXER_VALUE)
|
|
return (EINVAL);
|
|
|
|
/* Like above, but a precision of 6 bits. */
|
|
switch (cp->un.value.num_channels) {
|
|
case 1:
|
|
lgain = rgain = ESO_GAIN_TO_6BIT(
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO]);
|
|
break;
|
|
case 2:
|
|
lgain = ESO_GAIN_TO_6BIT(
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT]);
|
|
rgain = ESO_GAIN_TO_6BIT(
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT]);
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
sc->sc_gain[cp->dev][ESO_LEFT] = lgain;
|
|
sc->sc_gain[cp->dev][ESO_RIGHT] = rgain;
|
|
eso_set_gain(sc, cp->dev);
|
|
break;
|
|
|
|
case ESO_SPATIALIZER:
|
|
if (cp->type != AUDIO_MIXER_VALUE ||
|
|
cp->un.value.num_channels != 1)
|
|
return (EINVAL);
|
|
|
|
sc->sc_gain[cp->dev][ESO_LEFT] =
|
|
sc->sc_gain[cp->dev][ESO_RIGHT] =
|
|
ESO_GAIN_TO_6BIT(
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO]);
|
|
eso_set_gain(sc, cp->dev);
|
|
break;
|
|
|
|
case ESO_MONO_PLAY_VOL:
|
|
case ESO_MONO_REC_VOL:
|
|
if (cp->type != AUDIO_MIXER_VALUE ||
|
|
cp->un.value.num_channels != 1)
|
|
return (EINVAL);
|
|
|
|
sc->sc_gain[cp->dev][ESO_LEFT] =
|
|
sc->sc_gain[cp->dev][ESO_RIGHT] =
|
|
ESO_GAIN_TO_4BIT(
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO]);
|
|
eso_set_gain(sc, cp->dev);
|
|
break;
|
|
|
|
case ESO_PCSPEAKER_VOL:
|
|
if (cp->type != AUDIO_MIXER_VALUE ||
|
|
cp->un.value.num_channels != 1)
|
|
return (EINVAL);
|
|
|
|
sc->sc_gain[cp->dev][ESO_LEFT] =
|
|
sc->sc_gain[cp->dev][ESO_RIGHT] =
|
|
ESO_GAIN_TO_3BIT(
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO]);
|
|
eso_set_gain(sc, cp->dev);
|
|
break;
|
|
|
|
case ESO_SPATIALIZER_ENABLE:
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
return (EINVAL);
|
|
|
|
sc->sc_spatializer = (cp->un.ord != 0);
|
|
|
|
tmp = eso_read_mixreg(sc, ESO_MIXREG_SPAT);
|
|
if (sc->sc_spatializer)
|
|
tmp |= ESO_MIXREG_SPAT_ENB;
|
|
else
|
|
tmp &= ~ESO_MIXREG_SPAT_ENB;
|
|
eso_write_mixreg(sc, ESO_MIXREG_SPAT,
|
|
tmp | ESO_MIXREG_SPAT_RSTREL);
|
|
break;
|
|
|
|
case ESO_MASTER_MUTE:
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
return (EINVAL);
|
|
|
|
sc->sc_mvmute = (cp->un.ord != 0);
|
|
|
|
if (sc->sc_mvmute) {
|
|
eso_write_mixreg(sc, ESO_MIXREG_LMVM,
|
|
eso_read_mixreg(sc, ESO_MIXREG_LMVM) |
|
|
ESO_MIXREG_LMVM_MUTE);
|
|
eso_write_mixreg(sc, ESO_MIXREG_RMVM,
|
|
eso_read_mixreg(sc, ESO_MIXREG_RMVM) |
|
|
ESO_MIXREG_RMVM_MUTE);
|
|
} else {
|
|
eso_write_mixreg(sc, ESO_MIXREG_LMVM,
|
|
eso_read_mixreg(sc, ESO_MIXREG_LMVM) &
|
|
~ESO_MIXREG_LMVM_MUTE);
|
|
eso_write_mixreg(sc, ESO_MIXREG_RMVM,
|
|
eso_read_mixreg(sc, ESO_MIXREG_RMVM) &
|
|
~ESO_MIXREG_RMVM_MUTE);
|
|
}
|
|
break;
|
|
|
|
case ESO_MONOOUT_SOURCE:
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
return (EINVAL);
|
|
|
|
return (eso_set_monooutsrc(sc, cp->un.ord));
|
|
|
|
case ESO_MONOIN_BYPASS:
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
return (EINVAL);
|
|
|
|
return (eso_set_monoinbypass(sc, cp->un.ord));
|
|
|
|
case ESO_RECORD_MONITOR:
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
return (EINVAL);
|
|
|
|
sc->sc_recmon = (cp->un.ord != 0);
|
|
|
|
tmp = eso_read_ctlreg(sc, ESO_CTLREG_ACTL);
|
|
if (sc->sc_recmon)
|
|
tmp |= ESO_CTLREG_ACTL_RECMON;
|
|
else
|
|
tmp &= ~ESO_CTLREG_ACTL_RECMON;
|
|
eso_write_ctlreg(sc, ESO_CTLREG_ACTL, tmp);
|
|
break;
|
|
|
|
case ESO_RECORD_SOURCE:
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
return (EINVAL);
|
|
|
|
return (eso_set_recsrc(sc, cp->un.ord));
|
|
|
|
case ESO_MIC_PREAMP:
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
return (EINVAL);
|
|
|
|
return (eso_set_preamp(sc, cp->un.ord));
|
|
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
eso_get_port(hdl, cp)
|
|
void *hdl;
|
|
mixer_ctrl_t *cp;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
|
|
switch (cp->dev) {
|
|
case ESO_MASTER_VOL:
|
|
/* Reload from mixer after hardware volume control use. */
|
|
if (sc->sc_gain[cp->dev][ESO_LEFT] == (uint8_t)~0)
|
|
eso_reload_master_vol(sc);
|
|
/* FALLTHROUGH */
|
|
case ESO_DAC_PLAY_VOL:
|
|
case ESO_MIC_PLAY_VOL:
|
|
case ESO_LINE_PLAY_VOL:
|
|
case ESO_SYNTH_PLAY_VOL:
|
|
case ESO_CD_PLAY_VOL:
|
|
case ESO_AUXB_PLAY_VOL:
|
|
case ESO_RECORD_VOL:
|
|
case ESO_DAC_REC_VOL:
|
|
case ESO_MIC_REC_VOL:
|
|
case ESO_LINE_REC_VOL:
|
|
case ESO_SYNTH_REC_VOL:
|
|
case ESO_CD_REC_VOL:
|
|
case ESO_AUXB_REC_VOL:
|
|
/*
|
|
* Stereo-capable ports: if a single-channel query is made,
|
|
* just return the left channel's value (since single-channel
|
|
* settings themselves are applied to both channels).
|
|
*/
|
|
switch (cp->un.value.num_channels) {
|
|
case 1:
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO] =
|
|
sc->sc_gain[cp->dev][ESO_LEFT];
|
|
break;
|
|
case 2:
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT] =
|
|
sc->sc_gain[cp->dev][ESO_LEFT];
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT] =
|
|
sc->sc_gain[cp->dev][ESO_RIGHT];
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
break;
|
|
|
|
case ESO_MONO_PLAY_VOL:
|
|
case ESO_PCSPEAKER_VOL:
|
|
case ESO_MONO_REC_VOL:
|
|
case ESO_SPATIALIZER:
|
|
if (cp->un.value.num_channels != 1)
|
|
return (EINVAL);
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO] =
|
|
sc->sc_gain[cp->dev][ESO_LEFT];
|
|
break;
|
|
|
|
case ESO_RECORD_MONITOR:
|
|
cp->un.ord = sc->sc_recmon;
|
|
break;
|
|
|
|
case ESO_RECORD_SOURCE:
|
|
cp->un.ord = sc->sc_recsrc;
|
|
break;
|
|
|
|
case ESO_MONOOUT_SOURCE:
|
|
cp->un.ord = sc->sc_monooutsrc;
|
|
break;
|
|
|
|
case ESO_MONOIN_BYPASS:
|
|
cp->un.ord = sc->sc_monoinbypass;
|
|
break;
|
|
|
|
case ESO_SPATIALIZER_ENABLE:
|
|
cp->un.ord = sc->sc_spatializer;
|
|
break;
|
|
|
|
case ESO_MIC_PREAMP:
|
|
cp->un.ord = sc->sc_preamp;
|
|
break;
|
|
|
|
case ESO_MASTER_MUTE:
|
|
/* Reload from mixer after hardware volume control use. */
|
|
if (sc->sc_gain[cp->dev][ESO_LEFT] == (uint8_t)~0)
|
|
eso_reload_master_vol(sc);
|
|
cp->un.ord = sc->sc_mvmute;
|
|
break;
|
|
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
static int
|
|
eso_query_devinfo(hdl, dip)
|
|
void *hdl;
|
|
mixer_devinfo_t *dip;
|
|
{
|
|
|
|
switch (dip->index) {
|
|
case ESO_DAC_PLAY_VOL:
|
|
dip->mixer_class = ESO_INPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNdac);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_MIC_PLAY_VOL:
|
|
dip->mixer_class = ESO_INPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNmicrophone);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_LINE_PLAY_VOL:
|
|
dip->mixer_class = ESO_INPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNline);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_SYNTH_PLAY_VOL:
|
|
dip->mixer_class = ESO_INPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNfmsynth);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_MONO_PLAY_VOL:
|
|
dip->mixer_class = ESO_INPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, "mono_in");
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 1;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_CD_PLAY_VOL:
|
|
dip->mixer_class = ESO_INPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNcd);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_AUXB_PLAY_VOL:
|
|
dip->mixer_class = ESO_INPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, "auxb");
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
|
|
case ESO_MIC_PREAMP:
|
|
dip->mixer_class = ESO_MICROPHONE_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNpreamp);
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->un.e.num_mem = 2;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNoff);
|
|
dip->un.e.member[0].ord = 0;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNon);
|
|
dip->un.e.member[1].ord = 1;
|
|
break;
|
|
case ESO_MICROPHONE_CLASS:
|
|
dip->mixer_class = ESO_MICROPHONE_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNmicrophone);
|
|
dip->type = AUDIO_MIXER_CLASS;
|
|
break;
|
|
|
|
case ESO_INPUT_CLASS:
|
|
dip->mixer_class = ESO_INPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioCinputs);
|
|
dip->type = AUDIO_MIXER_CLASS;
|
|
break;
|
|
|
|
case ESO_MASTER_VOL:
|
|
dip->mixer_class = ESO_OUTPUT_CLASS;
|
|
dip->prev = AUDIO_MIXER_LAST;
|
|
dip->next = ESO_MASTER_MUTE;
|
|
strcpy(dip->label.name, AudioNmaster);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_MASTER_MUTE:
|
|
dip->mixer_class = ESO_OUTPUT_CLASS;
|
|
dip->prev = ESO_MASTER_VOL;
|
|
dip->next = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNmute);
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->un.e.num_mem = 2;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNoff);
|
|
dip->un.e.member[0].ord = 0;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNon);
|
|
dip->un.e.member[1].ord = 1;
|
|
break;
|
|
|
|
case ESO_PCSPEAKER_VOL:
|
|
dip->mixer_class = ESO_OUTPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, "pc_speaker");
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 1;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_MONOOUT_SOURCE:
|
|
dip->mixer_class = ESO_OUTPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, "mono_out");
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->un.e.num_mem = 3;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNmute);
|
|
dip->un.e.member[0].ord = ESO_MIXREG_MPM_MOMUTE;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNdac);
|
|
dip->un.e.member[1].ord = ESO_MIXREG_MPM_MOA2R;
|
|
strcpy(dip->un.e.member[2].label.name, AudioNmixerout);
|
|
dip->un.e.member[2].ord = ESO_MIXREG_MPM_MOREC;
|
|
break;
|
|
|
|
case ESO_MONOIN_BYPASS:
|
|
dip->mixer_class = ESO_MONOIN_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, "bypass");
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->un.e.num_mem = 2;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNoff);
|
|
dip->un.e.member[0].ord = 0;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNon);
|
|
dip->un.e.member[1].ord = 1;
|
|
break;
|
|
case ESO_MONOIN_CLASS:
|
|
dip->mixer_class = ESO_MONOIN_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, "mono_in");
|
|
dip->type = AUDIO_MIXER_CLASS;
|
|
break;
|
|
|
|
case ESO_SPATIALIZER:
|
|
dip->mixer_class = ESO_OUTPUT_CLASS;
|
|
dip->prev = AUDIO_MIXER_LAST;
|
|
dip->next = ESO_SPATIALIZER_ENABLE;
|
|
strcpy(dip->label.name, AudioNspatial);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 1;
|
|
strcpy(dip->un.v.units.name, "level");
|
|
break;
|
|
case ESO_SPATIALIZER_ENABLE:
|
|
dip->mixer_class = ESO_OUTPUT_CLASS;
|
|
dip->prev = ESO_SPATIALIZER;
|
|
dip->next = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, "enable");
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->un.e.num_mem = 2;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNoff);
|
|
dip->un.e.member[0].ord = 0;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNon);
|
|
dip->un.e.member[1].ord = 1;
|
|
break;
|
|
|
|
case ESO_OUTPUT_CLASS:
|
|
dip->mixer_class = ESO_OUTPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioCoutputs);
|
|
dip->type = AUDIO_MIXER_CLASS;
|
|
break;
|
|
|
|
case ESO_RECORD_MONITOR:
|
|
dip->mixer_class = ESO_MONITOR_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNmute);
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->un.e.num_mem = 2;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNoff);
|
|
dip->un.e.member[0].ord = 0;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNon);
|
|
dip->un.e.member[1].ord = 1;
|
|
break;
|
|
case ESO_MONITOR_CLASS:
|
|
dip->mixer_class = ESO_MONITOR_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioCmonitor);
|
|
dip->type = AUDIO_MIXER_CLASS;
|
|
break;
|
|
|
|
case ESO_RECORD_VOL:
|
|
dip->mixer_class = ESO_RECORD_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNrecord);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_RECORD_SOURCE:
|
|
dip->mixer_class = ESO_RECORD_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNsource);
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->un.e.num_mem = 4;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNmicrophone);
|
|
dip->un.e.member[0].ord = ESO_MIXREG_ERS_MIC;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNline);
|
|
dip->un.e.member[1].ord = ESO_MIXREG_ERS_LINE;
|
|
strcpy(dip->un.e.member[2].label.name, AudioNcd);
|
|
dip->un.e.member[2].ord = ESO_MIXREG_ERS_CD;
|
|
strcpy(dip->un.e.member[3].label.name, AudioNmixerout);
|
|
dip->un.e.member[3].ord = ESO_MIXREG_ERS_MIXER;
|
|
break;
|
|
case ESO_DAC_REC_VOL:
|
|
dip->mixer_class = ESO_RECORD_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNdac);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_MIC_REC_VOL:
|
|
dip->mixer_class = ESO_RECORD_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNmicrophone);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_LINE_REC_VOL:
|
|
dip->mixer_class = ESO_RECORD_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNline);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_SYNTH_REC_VOL:
|
|
dip->mixer_class = ESO_RECORD_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNfmsynth);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_MONO_REC_VOL:
|
|
dip->mixer_class = ESO_RECORD_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, "mono_in");
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 1; /* No lies */
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_CD_REC_VOL:
|
|
dip->mixer_class = ESO_RECORD_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNcd);
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_AUXB_REC_VOL:
|
|
dip->mixer_class = ESO_RECORD_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, "auxb");
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
break;
|
|
case ESO_RECORD_CLASS:
|
|
dip->mixer_class = ESO_RECORD_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioCrecord);
|
|
dip->type = AUDIO_MIXER_CLASS;
|
|
break;
|
|
|
|
default:
|
|
return (ENXIO);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
eso_allocmem(sc, size, align, boundary, flags, direction, ed)
|
|
struct eso_softc *sc;
|
|
size_t size;
|
|
size_t align;
|
|
size_t boundary;
|
|
int flags;
|
|
int direction;
|
|
struct eso_dma *ed;
|
|
{
|
|
int error, wait;
|
|
|
|
wait = (flags & M_NOWAIT) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK;
|
|
ed->ed_size = size;
|
|
|
|
error = bus_dmamem_alloc(ed->ed_dmat, ed->ed_size, align, boundary,
|
|
ed->ed_segs, sizeof (ed->ed_segs) / sizeof (ed->ed_segs[0]),
|
|
&ed->ed_nsegs, wait);
|
|
if (error)
|
|
goto out;
|
|
|
|
error = bus_dmamem_map(ed->ed_dmat, ed->ed_segs, ed->ed_nsegs,
|
|
ed->ed_size, &ed->ed_addr, wait | BUS_DMA_COHERENT);
|
|
if (error)
|
|
goto free;
|
|
|
|
error = bus_dmamap_create(ed->ed_dmat, ed->ed_size, 1, ed->ed_size, 0,
|
|
wait, &ed->ed_map);
|
|
if (error)
|
|
goto unmap;
|
|
|
|
error = bus_dmamap_load(ed->ed_dmat, ed->ed_map, ed->ed_addr,
|
|
ed->ed_size, NULL, wait |
|
|
(direction == AUMODE_RECORD) ? BUS_DMA_READ : BUS_DMA_WRITE);
|
|
if (error)
|
|
goto destroy;
|
|
|
|
return (0);
|
|
|
|
destroy:
|
|
bus_dmamap_destroy(ed->ed_dmat, ed->ed_map);
|
|
unmap:
|
|
bus_dmamem_unmap(ed->ed_dmat, ed->ed_addr, ed->ed_size);
|
|
free:
|
|
bus_dmamem_free(ed->ed_dmat, ed->ed_segs, ed->ed_nsegs);
|
|
out:
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
eso_freemem(ed)
|
|
struct eso_dma *ed;
|
|
{
|
|
|
|
bus_dmamap_unload(ed->ed_dmat, ed->ed_map);
|
|
bus_dmamap_destroy(ed->ed_dmat, ed->ed_map);
|
|
bus_dmamem_unmap(ed->ed_dmat, ed->ed_addr, ed->ed_size);
|
|
bus_dmamem_free(ed->ed_dmat, ed->ed_segs, ed->ed_nsegs);
|
|
}
|
|
|
|
static void *
|
|
eso_allocm(hdl, direction, size, type, flags)
|
|
void *hdl;
|
|
int direction;
|
|
size_t size;
|
|
struct malloc_type *type;
|
|
int flags;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
struct eso_dma *ed;
|
|
size_t boundary;
|
|
int error;
|
|
|
|
if ((ed = malloc(sizeof (*ed), type, flags)) == NULL)
|
|
return (NULL);
|
|
|
|
/*
|
|
* Apparently the Audio 1 DMA controller's current address
|
|
* register can't roll over a 64K address boundary, so we have to
|
|
* take care of that ourselves. Similarly, the Audio 2 DMA
|
|
* controller needs a 1M address boundary.
|
|
*/
|
|
if (direction == AUMODE_RECORD)
|
|
boundary = 0x10000;
|
|
else
|
|
boundary = 0x100000;
|
|
|
|
/*
|
|
* XXX Work around allocation problems for Audio 1, which
|
|
* XXX implements the 24 low address bits only, with
|
|
* XXX machine-specific DMA tag use.
|
|
*/
|
|
#ifdef alpha
|
|
/*
|
|
* XXX Force allocation through the (ISA) SGMAP.
|
|
*/
|
|
if (direction == AUMODE_RECORD)
|
|
ed->ed_dmat = alphabus_dma_get_tag(sc->sc_dmat, ALPHA_BUS_ISA);
|
|
else
|
|
#elif defined(amd64) || defined(i386)
|
|
/*
|
|
* XXX Force allocation through the ISA DMA tag.
|
|
*/
|
|
if (direction == AUMODE_RECORD)
|
|
ed->ed_dmat = &isa_bus_dma_tag;
|
|
else
|
|
#endif
|
|
ed->ed_dmat = sc->sc_dmat;
|
|
|
|
error = eso_allocmem(sc, size, 32, boundary, flags, direction, ed);
|
|
if (error) {
|
|
free(ed, type);
|
|
return (NULL);
|
|
}
|
|
ed->ed_next = sc->sc_dmas;
|
|
sc->sc_dmas = ed;
|
|
|
|
return (KVADDR(ed));
|
|
}
|
|
|
|
static void
|
|
eso_freem(hdl, addr, type)
|
|
void *hdl;
|
|
void *addr;
|
|
struct malloc_type *type;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
struct eso_dma *p, **pp;
|
|
|
|
for (pp = &sc->sc_dmas; (p = *pp) != NULL; pp = &p->ed_next) {
|
|
if (KVADDR(p) == addr) {
|
|
eso_freemem(p);
|
|
*pp = p->ed_next;
|
|
free(p, type);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static size_t
|
|
eso_round_buffersize(hdl, direction, bufsize)
|
|
void *hdl;
|
|
int direction;
|
|
size_t bufsize;
|
|
{
|
|
size_t maxsize;
|
|
|
|
/*
|
|
* The playback DMA buffer size on the Solo-1 is limited to 0xfff0
|
|
* bytes. This is because IO_A2DMAC is a two byte value
|
|
* indicating the literal byte count, and the 4 least significant
|
|
* bits are read-only. Zero is not used as a special case for
|
|
* 0x10000.
|
|
*
|
|
* For recording, DMAC_DMAC is the byte count - 1, so 0x10000 can
|
|
* be represented.
|
|
*/
|
|
maxsize = (direction == AUMODE_PLAY) ? 0xfff0 : 0x10000;
|
|
|
|
if (bufsize > maxsize)
|
|
bufsize = maxsize;
|
|
|
|
return (bufsize);
|
|
}
|
|
|
|
static paddr_t
|
|
eso_mappage(hdl, addr, offs, prot)
|
|
void *hdl;
|
|
void *addr;
|
|
off_t offs;
|
|
int prot;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
struct eso_dma *ed;
|
|
|
|
if (offs < 0)
|
|
return (-1);
|
|
for (ed = sc->sc_dmas; ed != NULL && KVADDR(ed) != addr;
|
|
ed = ed->ed_next)
|
|
;
|
|
if (ed == NULL)
|
|
return (-1);
|
|
|
|
return (bus_dmamem_mmap(ed->ed_dmat, ed->ed_segs, ed->ed_nsegs,
|
|
offs, prot, BUS_DMA_WAITOK));
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
eso_get_props(hdl)
|
|
void *hdl;
|
|
{
|
|
|
|
return (AUDIO_PROP_MMAP | AUDIO_PROP_INDEPENDENT |
|
|
AUDIO_PROP_FULLDUPLEX);
|
|
}
|
|
|
|
static int
|
|
eso_trigger_output(hdl, start, end, blksize, intr, arg, param)
|
|
void *hdl;
|
|
void *start, *end;
|
|
int blksize;
|
|
void (*intr) __P((void *));
|
|
void *arg;
|
|
struct audio_params *param;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
struct eso_dma *ed;
|
|
uint8_t a2c1;
|
|
|
|
DPRINTF((
|
|
"%s: trigger_output: start %p, end %p, blksize %d, intr %p(%p)\n",
|
|
sc->sc_dev.dv_xname, start, end, blksize, intr, arg));
|
|
DPRINTF(("%s: param: rate %lu, encoding %u, precision %u, channels %u, sw_code %p, factor %d\n",
|
|
sc->sc_dev.dv_xname, param->sample_rate, param->encoding,
|
|
param->precision, param->channels, param->sw_code, param->factor));
|
|
|
|
/* Find DMA buffer. */
|
|
for (ed = sc->sc_dmas; ed != NULL && KVADDR(ed) != start;
|
|
ed = ed->ed_next)
|
|
;
|
|
if (ed == NULL) {
|
|
printf("%s: trigger_output: bad addr %p\n",
|
|
sc->sc_dev.dv_xname, start);
|
|
return (EINVAL);
|
|
}
|
|
DPRINTF(("%s: dmaaddr %lx\n",
|
|
sc->sc_dev.dv_xname, (unsigned long)DMAADDR(ed)));
|
|
|
|
sc->sc_pintr = intr;
|
|
sc->sc_parg = arg;
|
|
|
|
/* Compute drain timeout. */
|
|
sc->sc_pdrain = (blksize * NBBY * hz) /
|
|
(param->sample_rate * param->channels *
|
|
param->precision * param->factor) + 2; /* slop */
|
|
|
|
/* DMA transfer count (in `words'!) reload using 2's complement. */
|
|
blksize = -(blksize >> 1);
|
|
eso_write_mixreg(sc, ESO_MIXREG_A2TCRLO, blksize & 0xff);
|
|
eso_write_mixreg(sc, ESO_MIXREG_A2TCRHI, blksize >> 8);
|
|
|
|
/* Update DAC to reflect DMA count and audio parameters. */
|
|
/* Note: we cache A2C2 in order to avoid r/m/w at interrupt time. */
|
|
if (param->precision * param->factor == 16)
|
|
sc->sc_a2c2 |= ESO_MIXREG_A2C2_16BIT;
|
|
else
|
|
sc->sc_a2c2 &= ~ESO_MIXREG_A2C2_16BIT;
|
|
if (param->channels == 2)
|
|
sc->sc_a2c2 |= ESO_MIXREG_A2C2_STEREO;
|
|
else
|
|
sc->sc_a2c2 &= ~ESO_MIXREG_A2C2_STEREO;
|
|
if (param->encoding == AUDIO_ENCODING_SLINEAR_BE ||
|
|
param->encoding == AUDIO_ENCODING_SLINEAR_LE)
|
|
sc->sc_a2c2 |= ESO_MIXREG_A2C2_SIGNED;
|
|
else
|
|
sc->sc_a2c2 &= ~ESO_MIXREG_A2C2_SIGNED;
|
|
/* Unmask IRQ. */
|
|
sc->sc_a2c2 |= ESO_MIXREG_A2C2_IRQM;
|
|
eso_write_mixreg(sc, ESO_MIXREG_A2C2, sc->sc_a2c2);
|
|
|
|
/* Set up DMA controller. */
|
|
bus_space_write_4(sc->sc_iot, sc->sc_ioh, ESO_IO_A2DMAA,
|
|
DMAADDR(ed));
|
|
bus_space_write_2(sc->sc_iot, sc->sc_ioh, ESO_IO_A2DMAC,
|
|
(uint8_t *)end - (uint8_t *)start);
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, ESO_IO_A2DMAM,
|
|
ESO_IO_A2DMAM_DMAENB | ESO_IO_A2DMAM_AUTO);
|
|
|
|
/* Start DMA. */
|
|
a2c1 = eso_read_mixreg(sc, ESO_MIXREG_A2C1);
|
|
a2c1 &= ~ESO_MIXREG_A2C1_RESV0; /* Paranoia? XXX bit 5 */
|
|
a2c1 |= ESO_MIXREG_A2C1_FIFOENB | ESO_MIXREG_A2C1_DMAENB |
|
|
ESO_MIXREG_A2C1_AUTO;
|
|
eso_write_mixreg(sc, ESO_MIXREG_A2C1, a2c1);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
eso_trigger_input(hdl, start, end, blksize, intr, arg, param)
|
|
void *hdl;
|
|
void *start, *end;
|
|
int blksize;
|
|
void (*intr) __P((void *));
|
|
void *arg;
|
|
struct audio_params *param;
|
|
{
|
|
struct eso_softc *sc = hdl;
|
|
struct eso_dma *ed;
|
|
uint8_t actl, a1c1;
|
|
|
|
DPRINTF((
|
|
"%s: trigger_input: start %p, end %p, blksize %d, intr %p(%p)\n",
|
|
sc->sc_dev.dv_xname, start, end, blksize, intr, arg));
|
|
DPRINTF(("%s: param: rate %lu, encoding %u, precision %u, channels %u, sw_code %p, factor %d\n",
|
|
sc->sc_dev.dv_xname, param->sample_rate, param->encoding,
|
|
param->precision, param->channels, param->sw_code, param->factor));
|
|
|
|
/*
|
|
* If we failed to configure the Audio 1 DMA controller, bail here
|
|
* while retaining availability of the DAC direction (in Audio 2).
|
|
*/
|
|
if (!sc->sc_dmac_configured)
|
|
return (EIO);
|
|
|
|
/* Find DMA buffer. */
|
|
for (ed = sc->sc_dmas; ed != NULL && KVADDR(ed) != start;
|
|
ed = ed->ed_next)
|
|
;
|
|
if (ed == NULL) {
|
|
printf("%s: trigger_output: bad addr %p\n",
|
|
sc->sc_dev.dv_xname, start);
|
|
return (EINVAL);
|
|
}
|
|
DPRINTF(("%s: dmaaddr %lx\n",
|
|
sc->sc_dev.dv_xname, (unsigned long)DMAADDR(ed)));
|
|
|
|
sc->sc_rintr = intr;
|
|
sc->sc_rarg = arg;
|
|
|
|
/* Compute drain timeout. */
|
|
sc->sc_rdrain = (blksize * NBBY * hz) /
|
|
(param->sample_rate * param->channels *
|
|
param->precision * param->factor) + 2; /* slop */
|
|
|
|
/* Set up ADC DMA converter parameters. */
|
|
actl = eso_read_ctlreg(sc, ESO_CTLREG_ACTL);
|
|
if (param->channels == 2) {
|
|
actl &= ~ESO_CTLREG_ACTL_MONO;
|
|
actl |= ESO_CTLREG_ACTL_STEREO;
|
|
} else {
|
|
actl &= ~ESO_CTLREG_ACTL_STEREO;
|
|
actl |= ESO_CTLREG_ACTL_MONO;
|
|
}
|
|
eso_write_ctlreg(sc, ESO_CTLREG_ACTL, actl);
|
|
|
|
/* Set up Transfer Type: maybe move to attach time? */
|
|
eso_write_ctlreg(sc, ESO_CTLREG_A1TT, ESO_CTLREG_A1TT_DEMAND4);
|
|
|
|
/* DMA transfer count reload using 2's complement. */
|
|
blksize = -blksize;
|
|
eso_write_ctlreg(sc, ESO_CTLREG_A1TCRLO, blksize & 0xff);
|
|
eso_write_ctlreg(sc, ESO_CTLREG_A1TCRHI, blksize >> 8);
|
|
|
|
/* Set up and enable Audio 1 DMA FIFO. */
|
|
a1c1 = ESO_CTLREG_A1C1_RESV1 | ESO_CTLREG_A1C1_FIFOENB;
|
|
if (param->precision * param->factor == 16)
|
|
a1c1 |= ESO_CTLREG_A1C1_16BIT;
|
|
if (param->channels == 2)
|
|
a1c1 |= ESO_CTLREG_A1C1_STEREO;
|
|
else
|
|
a1c1 |= ESO_CTLREG_A1C1_MONO;
|
|
if (param->encoding == AUDIO_ENCODING_SLINEAR_BE ||
|
|
param->encoding == AUDIO_ENCODING_SLINEAR_LE)
|
|
a1c1 |= ESO_CTLREG_A1C1_SIGNED;
|
|
eso_write_ctlreg(sc, ESO_CTLREG_A1C1, a1c1);
|
|
|
|
/* Set up ADC IRQ/DRQ parameters. */
|
|
eso_write_ctlreg(sc, ESO_CTLREG_LAIC,
|
|
ESO_CTLREG_LAIC_PINENB | ESO_CTLREG_LAIC_EXTENB);
|
|
eso_write_ctlreg(sc, ESO_CTLREG_DRQCTL,
|
|
ESO_CTLREG_DRQCTL_ENB1 | ESO_CTLREG_DRQCTL_EXTENB);
|
|
|
|
/* Set up and enable DMA controller. */
|
|
bus_space_write_1(sc->sc_dmac_iot, sc->sc_dmac_ioh, ESO_DMAC_CLEAR, 0);
|
|
bus_space_write_1(sc->sc_dmac_iot, sc->sc_dmac_ioh, ESO_DMAC_MASK,
|
|
ESO_DMAC_MASK_MASK);
|
|
bus_space_write_1(sc->sc_dmac_iot, sc->sc_dmac_ioh, ESO_DMAC_MODE,
|
|
DMA37MD_WRITE | DMA37MD_LOOP | DMA37MD_DEMAND);
|
|
bus_space_write_4(sc->sc_dmac_iot, sc->sc_dmac_ioh, ESO_DMAC_DMAA,
|
|
DMAADDR(ed));
|
|
bus_space_write_2(sc->sc_dmac_iot, sc->sc_dmac_ioh, ESO_DMAC_DMAC,
|
|
(uint8_t *)end - (uint8_t *)start - 1);
|
|
bus_space_write_1(sc->sc_dmac_iot, sc->sc_dmac_ioh, ESO_DMAC_MASK, 0);
|
|
|
|
/* Start DMA. */
|
|
eso_write_ctlreg(sc, ESO_CTLREG_A1C2,
|
|
ESO_CTLREG_A1C2_DMAENB | ESO_CTLREG_A1C2_READ |
|
|
ESO_CTLREG_A1C2_AUTO | ESO_CTLREG_A1C2_ADC);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Mixer utility functions.
|
|
*/
|
|
static int
|
|
eso_set_recsrc(sc, recsrc)
|
|
struct eso_softc *sc;
|
|
unsigned int recsrc;
|
|
{
|
|
mixer_devinfo_t di;
|
|
int i;
|
|
|
|
di.index = ESO_RECORD_SOURCE;
|
|
if (eso_query_devinfo(sc, &di) != 0)
|
|
panic("eso_set_recsrc: eso_query_devinfo failed");
|
|
|
|
for (i = 0; i < di.un.e.num_mem; i++) {
|
|
if (recsrc == di.un.e.member[i].ord) {
|
|
eso_write_mixreg(sc, ESO_MIXREG_ERS, recsrc);
|
|
sc->sc_recsrc = recsrc;
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
return (EINVAL);
|
|
}
|
|
|
|
static int
|
|
eso_set_monooutsrc(sc, monooutsrc)
|
|
struct eso_softc *sc;
|
|
unsigned int monooutsrc;
|
|
{
|
|
mixer_devinfo_t di;
|
|
int i;
|
|
uint8_t mpm;
|
|
|
|
di.index = ESO_MONOOUT_SOURCE;
|
|
if (eso_query_devinfo(sc, &di) != 0)
|
|
panic("eso_set_monooutsrc: eso_query_devinfo failed");
|
|
|
|
for (i = 0; i < di.un.e.num_mem; i++) {
|
|
if (monooutsrc == di.un.e.member[i].ord) {
|
|
mpm = eso_read_mixreg(sc, ESO_MIXREG_MPM);
|
|
mpm &= ~ESO_MIXREG_MPM_MOMASK;
|
|
mpm |= monooutsrc;
|
|
eso_write_mixreg(sc, ESO_MIXREG_MPM, mpm);
|
|
sc->sc_monooutsrc = monooutsrc;
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
return (EINVAL);
|
|
}
|
|
|
|
static int
|
|
eso_set_monoinbypass(sc, monoinbypass)
|
|
struct eso_softc *sc;
|
|
unsigned int monoinbypass;
|
|
{
|
|
mixer_devinfo_t di;
|
|
int i;
|
|
uint8_t mpm;
|
|
|
|
di.index = ESO_MONOIN_BYPASS;
|
|
if (eso_query_devinfo(sc, &di) != 0)
|
|
panic("eso_set_monoinbypass: eso_query_devinfo failed");
|
|
|
|
for (i = 0; i < di.un.e.num_mem; i++) {
|
|
if (monoinbypass == di.un.e.member[i].ord) {
|
|
mpm = eso_read_mixreg(sc, ESO_MIXREG_MPM);
|
|
mpm &= ~(ESO_MIXREG_MPM_MOMASK | ESO_MIXREG_MPM_RESV0);
|
|
mpm |= (monoinbypass ? ESO_MIXREG_MPM_MIBYPASS : 0);
|
|
eso_write_mixreg(sc, ESO_MIXREG_MPM, mpm);
|
|
sc->sc_monoinbypass = monoinbypass;
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
return (EINVAL);
|
|
}
|
|
|
|
static int
|
|
eso_set_preamp(sc, preamp)
|
|
struct eso_softc *sc;
|
|
unsigned int preamp;
|
|
{
|
|
mixer_devinfo_t di;
|
|
int i;
|
|
uint8_t mpm;
|
|
|
|
di.index = ESO_MIC_PREAMP;
|
|
if (eso_query_devinfo(sc, &di) != 0)
|
|
panic("eso_set_preamp: eso_query_devinfo failed");
|
|
|
|
for (i = 0; i < di.un.e.num_mem; i++) {
|
|
if (preamp == di.un.e.member[i].ord) {
|
|
mpm = eso_read_mixreg(sc, ESO_MIXREG_MPM);
|
|
mpm &= ~(ESO_MIXREG_MPM_PREAMP | ESO_MIXREG_MPM_RESV0);
|
|
mpm |= (preamp ? ESO_MIXREG_MPM_PREAMP : 0);
|
|
eso_write_mixreg(sc, ESO_MIXREG_MPM, mpm);
|
|
sc->sc_preamp = preamp;
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
return (EINVAL);
|
|
}
|
|
|
|
/*
|
|
* Reload Master Volume and Mute values in softc from mixer; used when
|
|
* those have previously been invalidated by use of hardware volume controls.
|
|
*/
|
|
static void
|
|
eso_reload_master_vol(sc)
|
|
struct eso_softc *sc;
|
|
{
|
|
uint8_t mv;
|
|
|
|
mv = eso_read_mixreg(sc, ESO_MIXREG_LMVM);
|
|
sc->sc_gain[ESO_MASTER_VOL][ESO_LEFT] =
|
|
(mv & ~ESO_MIXREG_LMVM_MUTE) << 2;
|
|
mv = eso_read_mixreg(sc, ESO_MIXREG_LMVM);
|
|
sc->sc_gain[ESO_MASTER_VOL][ESO_RIGHT] =
|
|
(mv & ~ESO_MIXREG_RMVM_MUTE) << 2;
|
|
/* Currently both channels are muted simultaneously; either is OK. */
|
|
sc->sc_mvmute = (mv & ESO_MIXREG_RMVM_MUTE) != 0;
|
|
}
|
|
|
|
static void
|
|
eso_set_gain(sc, port)
|
|
struct eso_softc *sc;
|
|
unsigned int port;
|
|
{
|
|
uint8_t mixreg, tmp;
|
|
|
|
switch (port) {
|
|
case ESO_DAC_PLAY_VOL:
|
|
mixreg = ESO_MIXREG_PVR_A2;
|
|
break;
|
|
case ESO_MIC_PLAY_VOL:
|
|
mixreg = ESO_MIXREG_PVR_MIC;
|
|
break;
|
|
case ESO_LINE_PLAY_VOL:
|
|
mixreg = ESO_MIXREG_PVR_LINE;
|
|
break;
|
|
case ESO_SYNTH_PLAY_VOL:
|
|
mixreg = ESO_MIXREG_PVR_SYNTH;
|
|
break;
|
|
case ESO_CD_PLAY_VOL:
|
|
mixreg = ESO_MIXREG_PVR_CD;
|
|
break;
|
|
case ESO_AUXB_PLAY_VOL:
|
|
mixreg = ESO_MIXREG_PVR_AUXB;
|
|
break;
|
|
|
|
case ESO_DAC_REC_VOL:
|
|
mixreg = ESO_MIXREG_RVR_A2;
|
|
break;
|
|
case ESO_MIC_REC_VOL:
|
|
mixreg = ESO_MIXREG_RVR_MIC;
|
|
break;
|
|
case ESO_LINE_REC_VOL:
|
|
mixreg = ESO_MIXREG_RVR_LINE;
|
|
break;
|
|
case ESO_SYNTH_REC_VOL:
|
|
mixreg = ESO_MIXREG_RVR_SYNTH;
|
|
break;
|
|
case ESO_CD_REC_VOL:
|
|
mixreg = ESO_MIXREG_RVR_CD;
|
|
break;
|
|
case ESO_AUXB_REC_VOL:
|
|
mixreg = ESO_MIXREG_RVR_AUXB;
|
|
break;
|
|
case ESO_MONO_PLAY_VOL:
|
|
mixreg = ESO_MIXREG_PVR_MONO;
|
|
break;
|
|
case ESO_MONO_REC_VOL:
|
|
mixreg = ESO_MIXREG_RVR_MONO;
|
|
break;
|
|
|
|
case ESO_PCSPEAKER_VOL:
|
|
/* Special case - only 3-bit, mono, and reserved bits. */
|
|
tmp = eso_read_mixreg(sc, ESO_MIXREG_PCSVR);
|
|
tmp &= ESO_MIXREG_PCSVR_RESV;
|
|
/* Map bits 7:5 -> 2:0. */
|
|
tmp |= (sc->sc_gain[port][ESO_LEFT] >> 5);
|
|
eso_write_mixreg(sc, ESO_MIXREG_PCSVR, tmp);
|
|
return;
|
|
|
|
case ESO_MASTER_VOL:
|
|
/* Special case - separate regs, and 6-bit precision. */
|
|
/* Map bits 7:2 -> 5:0, reflect mute settings. */
|
|
eso_write_mixreg(sc, ESO_MIXREG_LMVM,
|
|
(sc->sc_gain[port][ESO_LEFT] >> 2) |
|
|
(sc->sc_mvmute ? ESO_MIXREG_LMVM_MUTE : 0x00));
|
|
eso_write_mixreg(sc, ESO_MIXREG_RMVM,
|
|
(sc->sc_gain[port][ESO_RIGHT] >> 2) |
|
|
(sc->sc_mvmute ? ESO_MIXREG_RMVM_MUTE : 0x00));
|
|
return;
|
|
|
|
case ESO_SPATIALIZER:
|
|
/* Special case - only `mono', and higher precision. */
|
|
eso_write_mixreg(sc, ESO_MIXREG_SPATLVL,
|
|
sc->sc_gain[port][ESO_LEFT]);
|
|
return;
|
|
|
|
case ESO_RECORD_VOL:
|
|
/* Very Special case, controller register. */
|
|
eso_write_ctlreg(sc, ESO_CTLREG_RECLVL,ESO_4BIT_GAIN_TO_STEREO(
|
|
sc->sc_gain[port][ESO_LEFT], sc->sc_gain[port][ESO_RIGHT]));
|
|
return;
|
|
|
|
default:
|
|
#ifdef DIAGNOSTIC
|
|
panic("eso_set_gain: bad port %u", port);
|
|
/* NOTREACHED */
|
|
#else
|
|
return;
|
|
#endif
|
|
}
|
|
|
|
eso_write_mixreg(sc, mixreg, ESO_4BIT_GAIN_TO_STEREO(
|
|
sc->sc_gain[port][ESO_LEFT], sc->sc_gain[port][ESO_RIGHT]));
|
|
}
|