817 lines
35 KiB
C
817 lines
35 KiB
C
/* $NetBSD: scsipi_verbose.c,v 1.23 2004/08/21 21:29:39 thorpej Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Charles M. Hannum.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: scsipi_verbose.c,v 1.23 2004/08/21 21:29:39 thorpej Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/time.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/device.h>
|
|
|
|
#ifdef _KERNEL
|
|
#include <sys/systm.h>
|
|
|
|
#include "opt_scsi.h"
|
|
#else
|
|
#include <stdio.h>
|
|
#endif
|
|
#include <dev/scsipi/scsipi_all.h>
|
|
#include <dev/scsipi/scsipiconf.h>
|
|
#include <dev/scsipi/scsiconf.h>
|
|
|
|
static const char *sense_keys[16] = {
|
|
"No Additional Sense",
|
|
"Recovered Error",
|
|
"Not Ready",
|
|
"Media Error",
|
|
"Hardware Error",
|
|
"Illegal Request",
|
|
"Unit Attention",
|
|
"Write Protected",
|
|
"Blank Check",
|
|
"Vendor Unique",
|
|
"Copy Aborted",
|
|
"Aborted Command",
|
|
"Equal Error",
|
|
"Volume Overflow",
|
|
"Miscompare Error",
|
|
"Reserved"
|
|
};
|
|
|
|
/*
|
|
* The current version of this list can be obtained from
|
|
* <ftp://ftp.t10.org/t10/drafts/spc3/asc-num.txt>
|
|
*/
|
|
|
|
static const struct {
|
|
unsigned char asc;
|
|
unsigned char ascq;
|
|
char *description;
|
|
} adesc[] = {
|
|
{ 0x00, 0x00, "No Additional Sense Information" },
|
|
{ 0x00, 0x01, "Filemark Detected" },
|
|
{ 0x00, 0x02, "End-Of-Partition/Medium Detected" },
|
|
{ 0x00, 0x03, "Setmark Detected" },
|
|
{ 0x00, 0x04, "Beginning-Of-Partition/Medium Detected" },
|
|
{ 0x00, 0x05, "End-Of-Data Detected" },
|
|
{ 0x00, 0x06, "I/O Process Terminated" },
|
|
{ 0x00, 0x11, "Audio Play Operation In Progress" },
|
|
{ 0x00, 0x12, "Audio Play Operation Paused" },
|
|
{ 0x00, 0x13, "Audio Play Operation Successfully Completed" },
|
|
{ 0x00, 0x14, "Audio Play Operation Stopped Due to Error" },
|
|
{ 0x00, 0x15, "No Current Audio Status To Return" },
|
|
{ 0x00, 0x16, "Operation In Progress" },
|
|
{ 0x00, 0x17, "Cleaning Requested" },
|
|
{ 0x00, 0x18, "Erase Operation In Progress" },
|
|
{ 0x00, 0x19, "Locate Operation In Progress" },
|
|
{ 0x00, 0x1A, "Rewind Operation In Progress" },
|
|
{ 0x00, 0x1B, "Set Capacity Operation In Progess" },
|
|
{ 0x00, 0x1C, "Verify Operation In Progress" },
|
|
{ 0x01, 0x00, "No Index/Sector Signal" },
|
|
{ 0x02, 0x00, "No Seek Complete" },
|
|
{ 0x03, 0x00, "Peripheral Device Write Fault" },
|
|
{ 0x03, 0x01, "No Write Current" },
|
|
{ 0x03, 0x02, "Excessive Write Errors" },
|
|
{ 0x04, 0x00, "Logical Unit Not Ready, Cause Not Reportable" },
|
|
{ 0x04, 0x01, "Logical Unit Is in Process Of Becoming Ready" },
|
|
{ 0x04, 0x02, "Logical Unit Not Ready, Initialization Command Required" },
|
|
{ 0x04, 0x03, "Logical Unit Not Ready, Manual Intervention Required" },
|
|
{ 0x04, 0x04, "Logical Unit Not Ready, Format In Progress" },
|
|
{ 0x04, 0x05, "Logical Unit Not Ready, Rebuild In Progress" },
|
|
{ 0x04, 0x06, "Logical Unit Not Ready, Recalculation In Progress" },
|
|
{ 0x04, 0x07, "Logical Unit Not Ready, Operation In Progress" },
|
|
{ 0x04, 0x08, "Logical Unit Not Ready, Long Write In Progress" },
|
|
{ 0x04, 0x09, "Logical Unit Not Ready, Self-Test In Progress" },
|
|
{ 0x04, 0x0A, "Logical Unit Not Accessible, Asymmetric Access State "
|
|
"Transition" },
|
|
{ 0x04, 0x0B, "Logical Unit Not Accessible, Target Port In Standby State" },
|
|
{ 0x04, 0x0C, "Logical Unit Not Accessible, Target Port In Unavailable State" },
|
|
{ 0x04, 0x10, "Logical Unit Not Ready, Auxiliary Memory Not Accessible" },
|
|
{ 0x04, 0x11, "Logical Unit Not Ready, Notify (Enable_Spinup) Required" },
|
|
{ 0x05, 0x00, "Logical Unit Does Not Respond To Selection" },
|
|
{ 0x06, 0x00, "No Reference Position Found" },
|
|
{ 0x07, 0x00, "Multiple Peripheral Devices Selected" },
|
|
{ 0x08, 0x00, "Logical Unit Communication Failure" },
|
|
{ 0x08, 0x01, "Logical Unit Communication Timeout" },
|
|
{ 0x08, 0x02, "Logical Unit Communication Parity Error" },
|
|
{ 0x08, 0x03, "Logical Unit Communication CRC Error" },
|
|
{ 0x08, 0x04, "Unreachable Copy Target" },
|
|
{ 0x09, 0x00, "Track Following Error" },
|
|
{ 0x09, 0x01, "Tracking Servo Failure" },
|
|
{ 0x09, 0x02, "Focus Servo Failure" },
|
|
{ 0x09, 0x03, "Spindle Servo Failure" },
|
|
{ 0x09, 0x04, "Head Select Fault" },
|
|
{ 0x0A, 0x00, "Error Log Overflow" },
|
|
{ 0x0B, 0x00, "Warning" },
|
|
{ 0x0B, 0x01, "Warning - Specified Temperature Exceeded" },
|
|
{ 0x0B, 0x02, "Warning - Enclosure Degraded" },
|
|
{ 0x0C, 0x00, "Write Error" },
|
|
{ 0x0C, 0x01, "Write Error - Recovered with Auto Reallocation" },
|
|
{ 0x0C, 0x02, "Write Error - Auto Reallocate Failed" },
|
|
{ 0x0C, 0x03, "Write Error - Recommend Reassignment" },
|
|
{ 0x0C, 0x04, "Compression Check Miscompare Error" },
|
|
{ 0x0C, 0x05, "Data Expansion Occurred During Compression" },
|
|
{ 0x0C, 0x06, "Block Not Compressible" },
|
|
{ 0x0C, 0x07, "Write Error - Recovery Needed" },
|
|
{ 0x0C, 0x08, "Write Error - Recovery Failed" },
|
|
{ 0x0C, 0x09, "Write Error - Loss Of Streaming" },
|
|
{ 0x0C, 0x0A, "Write Error - Padding Blocks Added" },
|
|
{ 0x0C, 0x0B, "Auxiliary Memory Write Error" },
|
|
{ 0x0C, 0x0C, "Write Error - Unexpected Unsolicited Data" },
|
|
{ 0x0C, 0x0D, "Write Error - Not Enough Unsolicited Data" },
|
|
{ 0x0D, 0x00, "Error Detected By Third Party Temporary Initiator" },
|
|
{ 0x0D, 0x01, "Third Party Device Failure" },
|
|
{ 0x0D, 0x02, "Copy Target Device Not Reachable" },
|
|
{ 0x0D, 0x03, "Incorrect Copy Target Device Type" },
|
|
{ 0x0D, 0x04, "Copy Target Device Data Underrun" },
|
|
{ 0x0D, 0x05, "Copy Target Device Data Overrun" },
|
|
{ 0x0E, 0x00, "Invalid Information Unit" },
|
|
{ 0x0E, 0x01, "Information Unit Too Short" },
|
|
{ 0x0E, 0x02, "Information Unit Too Long" },
|
|
{ 0x10, 0x00, "ID CRC Or ECC Error" },
|
|
{ 0x11, 0x00, "Unrecovered Read Error" },
|
|
{ 0x11, 0x01, "Read Retries Exhausted" },
|
|
{ 0x11, 0x02, "Error Too Long To Correct" },
|
|
{ 0x11, 0x03, "Multiple Read Errors" },
|
|
{ 0x11, 0x04, "Unrecovered Read Error - Auto Reallocate Failed" },
|
|
{ 0x11, 0x05, "L-EC Uncorrectable Error" },
|
|
{ 0x11, 0x06, "CIRC Unrecovered Error" },
|
|
{ 0x11, 0x07, "Data Re-synchronization Error" },
|
|
{ 0x11, 0x08, "Incomplete Block Read" },
|
|
{ 0x11, 0x09, "No Gap Found" },
|
|
{ 0x11, 0x0A, "Miscorrected Error" },
|
|
{ 0x11, 0x0B, "Uncorrected Read Error - Recommend Reassignment" },
|
|
{ 0x11, 0x0C, "Uncorrected Read Error - Recommend Rewrite the Data" },
|
|
{ 0x11, 0x0D, "De-Compression CRC Error" },
|
|
{ 0x11, 0x0E, "Cannot Decompress Using Declared Algorithm" },
|
|
{ 0x11, 0x0F, "Error Reading UPC/EAN Number" },
|
|
{ 0x11, 0x10, "Error Reading ISRC Number" },
|
|
{ 0x11, 0x11, "Read Error - Loss Of Streaming" },
|
|
{ 0x11, 0x12, "Auxiliary Memory Read Error" },
|
|
{ 0x11, 0x13, "Read Error - Failed Retransmission Request" },
|
|
{ 0x12, 0x00, "Address Mark Not Found for ID Field" },
|
|
{ 0x13, 0x00, "Address Mark Not Found for Data Field" },
|
|
{ 0x14, 0x00, "Recorded Entity Not Found" },
|
|
{ 0x14, 0x01, "Record Not Found" },
|
|
{ 0x14, 0x02, "Filemark or Setmark Not Found" },
|
|
{ 0x14, 0x03, "End-Of-Data Not Found" },
|
|
{ 0x14, 0x04, "Block Sequence Error" },
|
|
{ 0x14, 0x05, "Record Not Found - Recommend Reassignment" },
|
|
{ 0x14, 0x06, "Record Not Found - Data Auto-Reallocated" },
|
|
{ 0x14, 0x07, "Locate Operation Failure" },
|
|
{ 0x15, 0x00, "Random Positioning Error" },
|
|
{ 0x15, 0x01, "Mechanical Positioning Error" },
|
|
{ 0x15, 0x02, "Positioning Error Detected By Read of Medium" },
|
|
{ 0x16, 0x00, "Data Synchronization Mark Error" },
|
|
{ 0x16, 0x01, "Data Sync Error - Data Rewritten" },
|
|
{ 0x16, 0x02, "Data Sync Error - Recommend Rewrite" },
|
|
{ 0x16, 0x03, "Data Sync Error - Data Auto-Reallocated" },
|
|
{ 0x16, 0x04, "Data Sync Error - Recommend Reassignment" },
|
|
{ 0x17, 0x00, "Recovered Data With No Error Correction Applied" },
|
|
{ 0x17, 0x01, "Recovered Data With Retries" },
|
|
{ 0x17, 0x02, "Recovered Data With Positive Head Offset" },
|
|
{ 0x17, 0x03, "Recovered Data With Negative Head Offset" },
|
|
{ 0x17, 0x04, "Recovered Data With Retries and/or CIRC Applied" },
|
|
{ 0x17, 0x05, "Recovered Data Using Previous Sector ID" },
|
|
{ 0x17, 0x06, "Recovered Data Without ECC - Data Auto-Reallocated" },
|
|
{ 0x17, 0x07, "Recovered Data Without ECC - Recommend Reassignment" },
|
|
{ 0x17, 0x08, "Recovered Data Without ECC - Recommend Rewrite" },
|
|
{ 0x17, 0x09, "Recovered Data Without ECC - Data Rewritten" },
|
|
{ 0x18, 0x00, "Recovered Data With Error Correction Applied" },
|
|
{ 0x18, 0x01, "Recovered Data With Error Correction & Retries Applied" },
|
|
{ 0x18, 0x02, "Recovered Data - Data Auto-Reallocated" },
|
|
{ 0x18, 0x03, "Recovered Data With CIRC" },
|
|
{ 0x18, 0x04, "Recovered Data With LEC" },
|
|
{ 0x18, 0x05, "Recovered Data - Recommend Reassignment" },
|
|
{ 0x18, 0x06, "Recovered Data - Recommend Rewrite" },
|
|
{ 0x18, 0x07, "Recovered Data With ECC - Data Rewritten" },
|
|
{ 0x18, 0x08, "Recovered Data With Linking" },
|
|
{ 0x19, 0x00, "Defect List Error" },
|
|
{ 0x19, 0x01, "Defect List Not Available" },
|
|
{ 0x19, 0x02, "Defect List Error in Primary List" },
|
|
{ 0x19, 0x03, "Defect List Error in Grown List" },
|
|
{ 0x1A, 0x00, "Parameter List Length Error" },
|
|
{ 0x1B, 0x00, "Synchronous Data Transfer Error" },
|
|
{ 0x1C, 0x00, "Defect List Not Found" },
|
|
{ 0x1C, 0x01, "Primary Defect List Not Found" },
|
|
{ 0x1C, 0x02, "Grown Defect List Not Found" },
|
|
{ 0x1D, 0x00, "Miscompare During Verify Operation" },
|
|
{ 0x1E, 0x00, "Recovered ID with ECC Correction" },
|
|
{ 0x1F, 0x00, "Partial Defect List Transfer" },
|
|
{ 0x20, 0x00, "Invalid Command Operation Code" },
|
|
{ 0x20, 0x01, "Access Denied - Initiator Pending-Enrolled" },
|
|
{ 0x20, 0x02, "Access Denied - No Access Rights" },
|
|
{ 0x20, 0x03, "Access Denied - Invalid Mgmt ID Key" },
|
|
{ 0x20, 0x04, "Illegal Command While In Write Capable State" },
|
|
{ 0x20, 0x06, "Illegal Command While In Explicit Address Mode" },
|
|
{ 0x20, 0x07, "Illegal Command While In Implicit Address Mode" },
|
|
{ 0x20, 0x08, "Access Denied - Enrollment Conflict" },
|
|
{ 0x20, 0x09, "Access Denied - Invalid LU Identifer" },
|
|
{ 0x20, 0x0A, "Access Denied - Invalid Proxy Token" },
|
|
{ 0x20, 0x0B, "Access Denied - ACL LUN Conflict" },
|
|
{ 0x21, 0x00, "Logical Block Address Out of Range" },
|
|
{ 0x21, 0x01, "Invalid Element Address" },
|
|
{ 0x21, 0x02, "Invalid Address For Write" },
|
|
{ 0x22, 0x00, "Illegal Function (Use 20 00, 24 00, or 26 00)" },
|
|
{ 0x24, 0x00, "Illegal Field in CDB" },
|
|
{ 0x24, 0x01, "CDB Decryption Error" },
|
|
{ 0x24, 0x04, "Security Audit Value Frozen" },
|
|
{ 0x24, 0x05, "Security Working Key Frozen" },
|
|
{ 0x24, 0x06, "Nonce Not Unique" },
|
|
{ 0x24, 0x07, "Nonce Timestamp Out Of Range" },
|
|
{ 0x25, 0x00, "Logical Unit Not Supported" },
|
|
{ 0x26, 0x00, "Invalid Field In Parameter List" },
|
|
{ 0x26, 0x01, "Parameter Not Supported" },
|
|
{ 0x26, 0x02, "Parameter Value Invalid" },
|
|
{ 0x26, 0x03, "Threshold Parameters Not Supported" },
|
|
{ 0x26, 0x04, "Invalid Release Of Persistent Reservation" },
|
|
{ 0x26, 0x05, "Data Decryption Error" },
|
|
{ 0x26, 0x06, "Too Many Target Descriptors" },
|
|
{ 0x26, 0x07, "Unsupported Target Descriptor Type Code" },
|
|
{ 0x26, 0x08, "Too Many Segment Descriptors" },
|
|
{ 0x26, 0x09, "Unsupported Segment Descriptor Type Code" },
|
|
{ 0x26, 0x0A, "Unexpected Inexact Segment" },
|
|
{ 0x26, 0x0B, "Inline Data Length Exceeded" },
|
|
{ 0x26, 0x0C, "Invalid Operation For Copy Source Or Destination" },
|
|
{ 0x26, 0x0D, "Copy Segment Granularity Violation" },
|
|
{ 0x26, 0x0E, "Invalid Parameter While Port Is Enabled" },
|
|
{ 0x27, 0x00, "Write Protected" },
|
|
{ 0x27, 0x01, "Hardware Write Protected" },
|
|
{ 0x27, 0x02, "Logical Unit Software Write Protected" },
|
|
{ 0x27, 0x03, "Associated Write Protect" },
|
|
{ 0x27, 0x04, "Persistent Write Protect" },
|
|
{ 0x27, 0x05, "Permanent Write Protect" },
|
|
{ 0x27, 0x06, "Conditional Write Protect" },
|
|
{ 0x28, 0x00, "Not Ready To Ready Transition (Medium May Have Changed)" },
|
|
{ 0x28, 0x01, "Import Or Export Element Accessed" },
|
|
{ 0x29, 0x00, "Power On, Reset, or Bus Device Reset Occurred" },
|
|
{ 0x29, 0x01, "Power On Occurred" },
|
|
{ 0x29, 0x02, "SCSI Bus Reset Occurred" },
|
|
{ 0x29, 0x03, "Bus Device Reset Function Occurred" },
|
|
{ 0x29, 0x04, "Device Internal Reset" },
|
|
{ 0x29, 0x05, "Transceiver Mode Changed To Single-Ended" },
|
|
{ 0x29, 0x06, "Transceiver Mode Changed To LVD" },
|
|
{ 0x29, 0x07, "I_T Nexus Loss Occurred" },
|
|
{ 0x2A, 0x00, "Parameters Changed" },
|
|
{ 0x2A, 0x01, "Mode Parameters Changed" },
|
|
{ 0x2A, 0x02, "Log Parameters Changed" },
|
|
{ 0x2A, 0x03, "Reservations Preempted" },
|
|
{ 0x2A, 0x04, "Reservations Released" },
|
|
{ 0x2A, 0x05, "Registrations Preempted" },
|
|
{ 0x2A, 0x06, "Asymmetric Access State Changed" },
|
|
{ 0x2A, 0x07, "Implicit Asymmetric Access State Transition Failed" },
|
|
{ 0x2B, 0x00, "Copy Cannot Execute Since Host Cannot Disconnect" },
|
|
{ 0x2C, 0x00, "Command Sequence Error" },
|
|
{ 0x2C, 0x01, "Too Many Windows Specified" },
|
|
{ 0x2C, 0x02, "Invalid Combination of Windows Specified" },
|
|
{ 0x2C, 0x03, "Current Program Area Is Not Empty" },
|
|
{ 0x2C, 0x04, "Current Program Area Is Empty" },
|
|
{ 0x2C, 0x05, "Illegal Power Condition Request" },
|
|
{ 0x2C, 0x06, "Persistent Prevent Conflict" },
|
|
{ 0x2C, 0x07, "Previous Busy Status" },
|
|
{ 0x2C, 0x08, "Previous Task Set Full Status" },
|
|
{ 0x2C, 0x09, "Previous Reservation Conflict Status" },
|
|
{ 0x2C, 0x0A, "Partition or Collection Contains User Objects" },
|
|
{ 0x2D, 0x00, "Overwrite Error On Update In Place" },
|
|
{ 0x2E, 0x00, "Insufficient Time For Operation" },
|
|
{ 0x2F, 0x00, "Commands Cleared By Another Initiator" },
|
|
{ 0x30, 0x00, "Incompatible Medium Installed" },
|
|
{ 0x30, 0x01, "Cannot Read Medium - Unknown Format" },
|
|
{ 0x30, 0x02, "Cannot Read Medium - Incompatible Format" },
|
|
{ 0x30, 0x03, "Cleaning Cartridge Installed" },
|
|
{ 0x30, 0x04, "Cannot Write Medium - Unknown Format" },
|
|
{ 0x30, 0x05, "Cannot Write Medium - Incompatible Format" },
|
|
{ 0x30, 0x06, "Cannot Format Medium - Incompatible Medium" },
|
|
{ 0x30, 0x07, "Cleaning Failure" },
|
|
{ 0x30, 0x08, "Cannot Write - Application Code Mismatch" },
|
|
{ 0x30, 0x09, "Current Session Not Fixated For Append" },
|
|
{ 0x30, 0x0A, "Cleaning Request Rejected" },
|
|
{ 0x30, 0x10, "Medium Not Formatted" },
|
|
{ 0x31, 0x00, "Medium Format Corrupted" },
|
|
{ 0x31, 0x01, "Format Command Failed" },
|
|
{ 0x31, 0x02, "Zoned Formatting Failed Due To Spare Linking" },
|
|
{ 0x32, 0x00, "No Defect Spare Location Available" },
|
|
{ 0x32, 0x01, "Defect List Update Failure" },
|
|
{ 0x33, 0x00, "Tape Length Error" },
|
|
{ 0x34, 0x00, "Enclosure Failure" },
|
|
{ 0x35, 0x00, "Enclosure Services Failure" },
|
|
{ 0x35, 0x01, "Unsupported Enclosure Function" },
|
|
{ 0x35, 0x02, "Enclosure Services Unavailable" },
|
|
{ 0x35, 0x03, "Enclosure Services Transfer Failed" },
|
|
{ 0x35, 0x04, "Enclosure Services Transfer Refused" },
|
|
{ 0x36, 0x00, "Ribbon, Ink, or Toner Failure" },
|
|
{ 0x37, 0x00, "Rounded Parameter" },
|
|
{ 0x38, 0x00, "Event Status Notification" },
|
|
{ 0x38, 0x02, "ESN - Power Management Class Event" },
|
|
{ 0x38, 0x04, "ESN - Media Class Event" },
|
|
{ 0x38, 0x06, "ESN - Device Busy Class Event" },
|
|
{ 0x39, 0x00, "Saving Parameters Not Supported" },
|
|
{ 0x3A, 0x00, "Medium Not Present" },
|
|
{ 0x3A, 0x01, "Medium Not Present - Tray Closed" },
|
|
{ 0x3A, 0x02, "Medium Not Present - Tray Open" },
|
|
{ 0x3A, 0x03, "Medium Not Present - Loadable" },
|
|
{ 0x3A, 0x04, "Medium Not Present - Medium Auxilliary Memory Accessible" },
|
|
{ 0x3B, 0x00, "Sequential Positioning Error" },
|
|
{ 0x3B, 0x01, "Tape Position Error At Beginning-of-Medium" },
|
|
{ 0x3B, 0x02, "Tape Position Error At End-of-Medium" },
|
|
{ 0x3B, 0x03, "Tape or Electronic Vertical Forms Unit Not Ready" },
|
|
{ 0x3B, 0x04, "Slew Failure" },
|
|
{ 0x3B, 0x05, "Paper Jam" },
|
|
{ 0x3B, 0x06, "Failed To Sense Top-Of-Form" },
|
|
{ 0x3B, 0x07, "Failed To Sense Bottom-Of-Form" },
|
|
{ 0x3B, 0x08, "Reposition Error" },
|
|
{ 0x3B, 0x09, "Read Past End Of Medium" },
|
|
{ 0x3B, 0x0A, "Read Past Begining Of Medium" },
|
|
{ 0x3B, 0x0B, "Position Past End Of Medium" },
|
|
{ 0x3B, 0x0C, "Position Past Beginning Of Medium" },
|
|
{ 0x3B, 0x0D, "Medium Destination Element Full" },
|
|
{ 0x3B, 0x0E, "Medium Source Element Empty" },
|
|
{ 0x3B, 0x0F, "End Of Medium Reached" },
|
|
{ 0x3B, 0x11, "Medium Magazine Not Accessible" },
|
|
{ 0x3B, 0x12, "Medium Magazine Removed" },
|
|
{ 0x3B, 0x13, "Medium Magazine Inserted" },
|
|
{ 0x3B, 0x14, "Medium Magazine Locked" },
|
|
{ 0x3B, 0x15, "Medium Magazine Unlocked" },
|
|
{ 0x3B, 0x16, "Mechanical Positioning Or Changer Error" },
|
|
{ 0x3D, 0x00, "Invalid Bits In IDENTIFY Message" },
|
|
{ 0x3E, 0x00, "Logical Unit Has Not Self-Configured Yet" },
|
|
{ 0x3E, 0x01, "Logical Unit Failure" },
|
|
{ 0x3E, 0x02, "Timeout On Logical Unit" },
|
|
{ 0x3E, 0x03, "Logical Unit Failed Self-Test" },
|
|
{ 0x3E, 0x04, "Logical Unit Unable To Update Self-Test Log" },
|
|
{ 0x3F, 0x00, "Target Operating Conditions Have Changed" },
|
|
{ 0x3F, 0x01, "Microcode Has Been Changed" },
|
|
{ 0x3F, 0x02, "Changed Operating Definition" },
|
|
{ 0x3F, 0x03, "INQUIRY Data Has Changed" },
|
|
{ 0x3F, 0x04, "Component Device Attached" },
|
|
{ 0x3F, 0x05, "Device Identifier Changed" },
|
|
{ 0x3F, 0x06, "Redundancy Group Created Or Modified" },
|
|
{ 0x3F, 0x07, "Redundancy Group Deleted" },
|
|
{ 0x3F, 0x08, "Spare Created Or Modified" },
|
|
{ 0x3F, 0x09, "Spare Deleted" },
|
|
{ 0x3F, 0x0A, "Volume Set Created Or Modified" },
|
|
{ 0x3F, 0x0B, "Volume Set Deleted" },
|
|
{ 0x3F, 0x0C, "Volume Set Deassigned" },
|
|
{ 0x3F, 0x0D, "Volume Set Reassigned" },
|
|
{ 0x3F, 0x0E, "Reported LUNs Data Has Changed" },
|
|
{ 0x3F, 0x0F, "Echo Buffer Overwritten" },
|
|
{ 0x3F, 0x10, "Medium Loadable" },
|
|
{ 0x3F, 0x11, "Medium Auxiliary Memory Accessible" },
|
|
{ 0x40, 0x00, "RAM FAILURE (Should Use 40 NN)" },
|
|
{ 0x41, 0x00, "Data Path FAILURE (Should Use 40 NN)" },
|
|
{ 0x42, 0x00, "Power-On or Self-Test FAILURE (Should Use 40 NN)" },
|
|
{ 0x43, 0x00, "Message Error" },
|
|
{ 0x44, 0x00, "Internal Target Failure" },
|
|
{ 0x45, 0x00, "Select Or Reselect Failure" },
|
|
{ 0x46, 0x00, "Unsuccessful Soft Reset" },
|
|
{ 0x47, 0x00, "SCSI Parity Error" },
|
|
{ 0x47, 0x01, "Data Phase CRC Error Detected" },
|
|
{ 0x47, 0x02, "SCSI Parity Error Detected During ST Data Phase" },
|
|
{ 0x47, 0x03, "Information Unit iuCRC Error Detected" },
|
|
{ 0x47, 0x04, "Asynchronous Information Protection Error Detected" },
|
|
{ 0x47, 0x05, "Protocol Service CRC Error" },
|
|
{ 0x47, 0x7F, "Some Commands Cleared by iSCSI Protocol Event" },
|
|
{ 0x48, 0x00, "INITIATOR DETECTED ERROR Message Received" },
|
|
{ 0x49, 0x00, "Invalid Message Error" },
|
|
{ 0x4A, 0x00, "Command Phase Error" },
|
|
{ 0x4B, 0x00, "Data Phase Error" },
|
|
{ 0x4B, 0x01, "Illegal Target Port Transfer Tag Received" },
|
|
{ 0x4B, 0x02, "Too Much Write Data" },
|
|
{ 0x4B, 0x03, "ACK/NAK Timeout" },
|
|
{ 0x4B, 0x04, "NAK Reveived" },
|
|
{ 0x4B, 0x05, "Data Offset Error" },
|
|
{ 0x4B, 0x06, "Initiator Response Timeout" },
|
|
{ 0x4C, 0x00, "Logical Unit Failed Self-Configuration" },
|
|
{ 0x4D, 0x00, "Tagged Overlapped Commands (NN = Queue Tag)" },
|
|
{ 0x4E, 0x00, "Overlapped Commands Attempted" },
|
|
{ 0x50, 0x00, "Write Append Error" },
|
|
{ 0x50, 0x01, "Write Append Position Error" },
|
|
{ 0x50, 0x02, "Position Error Related To Timing" },
|
|
{ 0x51, 0x00, "Erase Failure" },
|
|
{ 0x51, 0x01, "Erase Failure - Incomplete Erase Operation Detected" },
|
|
{ 0x52, 0x00, "Cartridge Fault" },
|
|
{ 0x53, 0x00, "Media Load or Eject Failed" },
|
|
{ 0x53, 0x01, "Unload Tape Failure" },
|
|
{ 0x53, 0x02, "Medium Removal Prevented" },
|
|
{ 0x54, 0x00, "SCSI To Host System Interface Failure" },
|
|
{ 0x55, 0x00, "System Resource Failure" },
|
|
{ 0x55, 0x01, "System Buffer Full" },
|
|
{ 0x55, 0x02, "Insufficient Reservation Resources" },
|
|
{ 0x55, 0x03, "Insufficient Resources" },
|
|
{ 0x55, 0x04, "Insufficient Registration Resources" },
|
|
{ 0x55, 0x05, "Insufficient Access Control Resources" },
|
|
{ 0x55, 0x06, "Auxiliary Memory Out Of Space" },
|
|
{ 0x57, 0x00, "Unable To Recover Table-Of-Contents" },
|
|
{ 0x58, 0x00, "Generation Does Not Exist" },
|
|
{ 0x59, 0x00, "Updated Block Read" },
|
|
{ 0x5A, 0x00, "Operator Request or State Change Input (Unspecified)" },
|
|
{ 0x5A, 0x01, "Operator Medium Removal Requested" },
|
|
{ 0x5A, 0x02, "Operator Selected Write Protect" },
|
|
{ 0x5A, 0x03, "Operator Selected Write Permit" },
|
|
{ 0x5B, 0x00, "Log Exception" },
|
|
{ 0x5B, 0x01, "Threshold Condition Met" },
|
|
{ 0x5B, 0x02, "Log Counter At Maximum" },
|
|
{ 0x5B, 0x03, "Log List Codes Exhausted" },
|
|
{ 0x5C, 0x00, "RPL Status Change" },
|
|
{ 0x5C, 0x01, "Spindles Synchronized" },
|
|
{ 0x5C, 0x02, "Spindles Not Synchronized" },
|
|
{ 0x5D, 0x00, "Failure Prediction Threshold Exceeded" },
|
|
{ 0x5D, 0x01, "Media Failure Prediction Threshold Exceeded" },
|
|
{ 0x5D, 0x02, "Logical Unit Failure Prediction Threshold Exceeded" },
|
|
{ 0x5D, 0x03, "Spare Area Exhaustion Prediction Threshold Exceeded" },
|
|
{ 0x5D, 0x10, "Hardware Impending Failure General Hard Drive Failure" },
|
|
{ 0x5D, 0x11, "Hardware Impending Failure Drive Error Rate Too High" },
|
|
{ 0x5D, 0x12, "Hardware Impending Failure Data Error Rate Too High" },
|
|
{ 0x5D, 0x13, "Hardware Impending Failure Seek Error Rate Too High" },
|
|
{ 0x5D, 0x14, "Hardware Impending Failure Too Many Block Reassigns" },
|
|
{ 0x5D, 0x15, "Hardware Impending Failure Access Times Too High" },
|
|
{ 0x5D, 0x16, "Hardware Impending Failure Start Unit Times Too High" },
|
|
{ 0x5D, 0x17, "Hardware Impending Failure Channel Parametrics" },
|
|
{ 0x5D, 0x18, "Hardware Impending Failure Controller Detected" },
|
|
{ 0x5D, 0x19, "Hardware Impending Failure Throughput Performance" },
|
|
{ 0x5D, 0x1A, "Hardware Impending Failure Seek Time Performance" },
|
|
{ 0x5D, 0x1B, "Hardware Impending Failure Spin-Up Retry Count" },
|
|
{ 0x5D, 0x1C, "Hardware Impending Failure Drive Calibration Retry Count" },
|
|
{ 0x5D, 0x20, "Controller Impending Failure General Hard Drive Failure" },
|
|
{ 0x5D, 0x21, "Controller Impending Failure Drive Error Rate Too High" },
|
|
{ 0x5D, 0x22, "Controller Impending Failure Data Error Rate Too High" },
|
|
{ 0x5D, 0x23, "Controller Impending Failure Seek Error Rate Too High" },
|
|
{ 0x5D, 0x24, "Controller Impending Failure Too Many Block Reassigns" },
|
|
{ 0x5D, 0x25, "Controller Impending Failure Access Times Too High" },
|
|
{ 0x5D, 0x26, "Controller Impending Failure Start Unit Times Too High" },
|
|
{ 0x5D, 0x27, "Controller Impending Failure Channel Parametrics" },
|
|
{ 0x5D, 0x28, "Controller Impending Failure Controller Detected" },
|
|
{ 0x5D, 0x29, "Controller Impending Failure Throughput Performance" },
|
|
{ 0x5D, 0x2A, "Controller Impending Failure Seek Time Performance" },
|
|
{ 0x5D, 0x2B, "Controller Impending Failure Spin-Up Retry Count" },
|
|
{ 0x5D, 0x2C, "Controller Impending Failure Drive Calibration Retry Count" },
|
|
{ 0x5D, 0x30, "Data Channel Impending Failure General Hard Drive Failure" },
|
|
{ 0x5D, 0x31, "Data Channel Impending Failure Drive Error Rate Too High" },
|
|
{ 0x5D, 0x32, "Data Channel Impending Failure Data Error Rate Too High" },
|
|
{ 0x5D, 0x33, "Data Channel Impending Failure Seek Error Rate Too High" },
|
|
{ 0x5D, 0x34, "Data Channel Impending Failure Too Many Block Reassigns" },
|
|
{ 0x5D, 0x35, "Data Channel Impending Failure Access Times Too High" },
|
|
{ 0x5D, 0x36, "Data Channel Impending Failure Start Unit Times Too High" },
|
|
{ 0x5D, 0x37, "Data Channel Impending Failure Channel Parametrics" },
|
|
{ 0x5D, 0x38, "Data Channel Impending Failure Controller Detected" },
|
|
{ 0x5D, 0x39, "Data Channel Impending Failure Throughput Performance" },
|
|
{ 0x5D, 0x3A, "Data Channel Impending Failure Seek Time Performance" },
|
|
{ 0x5D, 0x3B, "Data Channel Impending Failure Spin-Up Retry Count" },
|
|
{ 0x5D, 0x3C, "Data Channel Impending Failure Drive Calibration Retry Count" },
|
|
{ 0x5D, 0x40, "Servo Impending Failure General Hard Drive Failure" },
|
|
{ 0x5D, 0x41, "Servo Impending Failure Drive Error Rate Too High" },
|
|
{ 0x5D, 0x42, "Servo Impending Failure Data Error Rate Too High" },
|
|
{ 0x5D, 0x43, "Servo Impending Failure Seek Error Rate Too High" },
|
|
{ 0x5D, 0x44, "Servo Impending Failure Too Many Block Reassigns" },
|
|
{ 0x5D, 0x45, "Servo Impending Failure Access Times Too High" },
|
|
{ 0x5D, 0x46, "Servo Impending Failure Start Unit Times Too High" },
|
|
{ 0x5D, 0x47, "Servo Impending Failure Channel Parametrics" },
|
|
{ 0x5D, 0x48, "Servo Impending Failure Controller Detected" },
|
|
{ 0x5D, 0x49, "Servo Impending Failure Throughput Performance" },
|
|
{ 0x5D, 0x4A, "Servo Impending Failure Seek Time Performance" },
|
|
{ 0x5D, 0x4B, "Servo Impending Failure Spin-Up Retry Count" },
|
|
{ 0x5D, 0x4C, "Servo Impending Failure Drive Calibration Retry Count" },
|
|
{ 0x5D, 0x50, "Spindle Impending Failure General Hard Drive Failure" },
|
|
{ 0x5D, 0x51, "Spindle Impending Failure Drive Error Rate Too High" },
|
|
{ 0x5D, 0x52, "Spindle Impending Failure Data Error Rate Too High" },
|
|
{ 0x5D, 0x53, "Spindle Impending Failure Seek Error Rate Too High" },
|
|
{ 0x5D, 0x54, "Spindle Impending Failure Too Many Block Reassigns" },
|
|
{ 0x5D, 0x55, "Spindle Impending Failure Access Times Too High" },
|
|
{ 0x5D, 0x56, "Spindle Impending Failure Start Unit Times Too High" },
|
|
{ 0x5D, 0x57, "Spindle Impending Failure Channel Parametrics" },
|
|
{ 0x5D, 0x58, "Spindle Impending Failure Controller Detected" },
|
|
{ 0x5D, 0x59, "Spindle Impending Failure Throughput Performance" },
|
|
{ 0x5D, 0x5A, "Spindle Impending Failure Seek Time Performance" },
|
|
{ 0x5D, 0x5B, "Spindle Impending Failure Spin-Up Retry Count" },
|
|
{ 0x5D, 0x5C, "Spindle Impending Failure Drive Calibration Retry Count" },
|
|
{ 0x5D, 0x60, "Firmware Impending Failure General Hard Drive Failure" },
|
|
{ 0x5D, 0x61, "Firmware Impending Failure Drive Error Rate Too High" },
|
|
{ 0x5D, 0x62, "Firmware Impending Failure Data Error Rate Too High" },
|
|
{ 0x5D, 0x63, "Firmware Impending Failure Seek Error Rate Too High" },
|
|
{ 0x5D, 0x64, "Firmware Impending Failure Too Many Block Reassigns" },
|
|
{ 0x5D, 0x65, "Firmware Impending Failure Access Times Too High" },
|
|
{ 0x5D, 0x66, "Firmware Impending Failure Start Unit Times Too High" },
|
|
{ 0x5D, 0x67, "Firmware Impending Failure Channel Parametrics" },
|
|
{ 0x5D, 0x68, "Firmware Impending Failure Controller Detected" },
|
|
{ 0x5D, 0x69, "Firmware Impending Failure Throughput Performance" },
|
|
{ 0x5D, 0x6A, "Firmware Impending Failure Seek Time Performance" },
|
|
{ 0x5D, 0x6B, "Firmware Impending Failure Spin-Up Retry Count" },
|
|
{ 0x5D, 0x6C, "Firmware Impending Failure Drive Calibration Retry Count" },
|
|
{ 0x5D, 0xFF, "Failure Prediction Threshold Exceeded (False)" },
|
|
{ 0x5E, 0x00, "Low Power Condition On" },
|
|
{ 0x5E, 0x01, "Idle Condition Activated By Timer" },
|
|
{ 0x5E, 0x02, "Standby Condition Activated By Timer" },
|
|
{ 0x5E, 0x03, "Idle Condition Activated By Command" },
|
|
{ 0x5E, 0x04, "Standby Condition Activated By Command" },
|
|
{ 0x5E, 0x41, "Power State Change To Active" },
|
|
{ 0x5E, 0x42, "Power State Change To Idle" },
|
|
{ 0x5E, 0x43, "Power State Change To Standby" },
|
|
{ 0x5E, 0x45, "Power State Change To Sleep" },
|
|
{ 0x5E, 0x47, "Power State Change To Device Control" },
|
|
{ 0x60, 0x00, "Lamp Failure" },
|
|
{ 0x61, 0x00, "Video Acquisition Error" },
|
|
{ 0x61, 0x01, "Unable To Acquire Video" },
|
|
{ 0x61, 0x02, "Out Of Focus" },
|
|
{ 0x62, 0x00, "Scan Head Positioning Error" },
|
|
{ 0x63, 0x00, "End Of User Area Encountered On This Track" },
|
|
{ 0x63, 0x01, "Packet Does Not Fit In Available Space" },
|
|
{ 0x64, 0x00, "Illegal Mode For This Track" },
|
|
{ 0x64, 0x01, "Invalid Packet Size" },
|
|
{ 0x65, 0x00, "Voltage Fault" },
|
|
{ 0x66, 0x00, "Automatic Document Feeder Cover Up" },
|
|
{ 0x66, 0x01, "Automatic Document Feeder Lift Up" },
|
|
{ 0x66, 0x02, "Document Jam In Automatic Document Feeder" },
|
|
{ 0x66, 0x03, "Document Misfeed In Automatic Document Feeder" },
|
|
{ 0x67, 0x00, "Configuration Failure" },
|
|
{ 0x67, 0x01, "Configuration Of Incapable Logical Units Failed" },
|
|
{ 0x67, 0x02, "Add Logical Unit Failed" },
|
|
{ 0x67, 0x03, "Modification Of Logical Unit Failed" },
|
|
{ 0x67, 0x04, "Exchange Of Logical Unit Failed" },
|
|
{ 0x67, 0x05, "Remove Of Logical Unit Failed" },
|
|
{ 0x67, 0x06, "Attachment Of Logical Unit Failed" },
|
|
{ 0x67, 0x07, "Creation of Logical Unit Failed" },
|
|
{ 0x67, 0x08, "Assign Failure Occurred" },
|
|
{ 0x67, 0x09, "Multiply Assigned Logical Unit" },
|
|
{ 0x67, 0x0A, "Set Target Port Groups Command Failed" },
|
|
{ 0x68, 0x00, "Logical Unit Not Configured" },
|
|
{ 0x69, 0x00, "Data Loss On Logical Unit" },
|
|
{ 0x69, 0x01, "Multiple Logical Unit Failures" },
|
|
{ 0x69, 0x02, "Parity/Data Mismatch" },
|
|
{ 0x6A, 0x00, "Informational, Refer To Log" },
|
|
{ 0x6B, 0x00, "State Change Has Occurred" },
|
|
{ 0x6B, 0x01, "Redundancy Level Got Better" },
|
|
{ 0x6B, 0x02, "Redundancy Level Got Worse" },
|
|
{ 0x6C, 0x00, "Rebuild Failure Occurred" },
|
|
{ 0x6D, 0x00, "Recalculate Failure Occurred" },
|
|
{ 0x6E, 0x00, "Command To Logical Unit Failed" },
|
|
{ 0x6F, 0x00, "Copy Protection Key Exchange Failure - Authentication Failure" },
|
|
{ 0x6F, 0x01, "Copy Protection Key Exchange Failure - Key Not Present" },
|
|
{ 0x6F, 0x02, "Copy Protection Key Exchange Failure - Key Not Established" },
|
|
{ 0x6F, 0x03, "Read Of Scrambled Sector Without Authentication" },
|
|
{ 0x6F, 0x04, "Media Region Code Is Mismatched To Logical Unit Region" },
|
|
{ 0x6F, 0x05, "Drive Region Must Be Permanent/Region Reset Count Error" },
|
|
{ 0x70, 0x00, "Decompression Exception Short Algorithm ID Of NN" },
|
|
{ 0x71, 0x00, "Decompression Exception Long Algorithm ID" },
|
|
{ 0x72, 0x00, "Session Fixation Error" },
|
|
{ 0x72, 0x01, "Session Fixation Error Writing Lead-In" },
|
|
{ 0x72, 0x02, "Session Fixation Error Writing Lead-Out" },
|
|
{ 0x72, 0x03, "Session Fixation Error - Incomplete Track In Session" },
|
|
{ 0x72, 0x04, "Empty Or Partially Written Reserved Track" },
|
|
{ 0x72, 0x05, "No More Track Reservations Allowed" },
|
|
{ 0x73, 0x00, "CD Control Error" },
|
|
{ 0x73, 0x01, "Power Calibration Area Almost Full" },
|
|
{ 0x73, 0x02, "Power Calibration Area Is Full" },
|
|
{ 0x73, 0x03, "Power Calibration Area Error" },
|
|
{ 0x73, 0x04, "Program Memory Area Update Failure" },
|
|
{ 0x73, 0x05, "Program Memory Area Is Full" },
|
|
{ 0x73, 0x06, "RMA/PMA Is Almost Full" },
|
|
{ 0x00, 0x00, NULL }
|
|
};
|
|
|
|
static void
|
|
asc2ascii(u_char asc, u_char ascq, char *result, size_t l)
|
|
{
|
|
int i = 0;
|
|
|
|
while (adesc[i].description != NULL) {
|
|
if (adesc[i].asc == asc && adesc[i].ascq == ascq)
|
|
break;
|
|
i++;
|
|
}
|
|
if (adesc[i].description == NULL) {
|
|
if (asc == 0x40 && ascq != 0)
|
|
(void)snprintf(result, l,
|
|
"Diagnostic Failure on Component 0x%02x",
|
|
ascq & 0xff);
|
|
else
|
|
(void)snprintf(result, l, "ASC 0x%02x ASCQ 0x%02x",
|
|
asc & 0xff, ascq & 0xff);
|
|
} else
|
|
(void)strlcpy(result, adesc[i].description, l);
|
|
}
|
|
|
|
void
|
|
scsipi_print_sense_data(struct scsipi_sense_data *sense, int verbosity)
|
|
{
|
|
int32_t info;
|
|
int i, j, k;
|
|
char *sbs, *s = (char *) sense;
|
|
|
|
/*
|
|
* Basics- print out SENSE KEY
|
|
*/
|
|
printf(" SENSE KEY: %s", scsipi_decode_sense(s, 0));
|
|
|
|
/*
|
|
* Print out, unqualified but aligned, FMK, EOM and ILI status.
|
|
*/
|
|
if (s[2] & 0xe0) {
|
|
char pad;
|
|
printf("\n ");
|
|
pad = ' ';
|
|
if (s[2] & SSD_FILEMARK) {
|
|
printf("%c Filemark Detected", pad);
|
|
pad = ',';
|
|
}
|
|
if (s[2] & SSD_EOM) {
|
|
printf("%c EOM Detected", pad);
|
|
pad = ',';
|
|
}
|
|
if (s[2] & SSD_ILI)
|
|
printf("%c Incorrect Length Indicator Set", pad);
|
|
}
|
|
|
|
/*
|
|
* Now we should figure out, based upon device type, how
|
|
* to format the information field. Unfortunately, that's
|
|
* not convenient here, so we'll print it as a signed
|
|
* 32 bit integer.
|
|
*/
|
|
info = _4btol(&s[3]);
|
|
if (info)
|
|
printf("\n INFO FIELD: %d", info);
|
|
|
|
/*
|
|
* Now we check additional length to see whether there is
|
|
* more information to extract.
|
|
*/
|
|
|
|
/* enough for command specific information? */
|
|
if (((unsigned int) s[7]) < 4) {
|
|
printf("\n");
|
|
return;
|
|
}
|
|
info = _4btol(&s[8]);
|
|
if (info)
|
|
printf("\n COMMAND INFO: %d (0x%x)", info, info);
|
|
|
|
/*
|
|
* Decode ASC && ASCQ info, plus FRU, plus the rest...
|
|
*/
|
|
|
|
sbs = scsipi_decode_sense(s, 1);
|
|
if (sbs)
|
|
printf("\n ASC/ASCQ: %s", sbs);
|
|
if (s[14] != 0)
|
|
printf("\n FRU CODE: 0x%x", s[14] & 0xff);
|
|
sbs = scsipi_decode_sense(s, 3);
|
|
if (sbs)
|
|
printf("\n SKSV: %s", sbs);
|
|
printf("\n");
|
|
if (verbosity == 0) {
|
|
printf("\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Now figure whether we should print any additional informtion.
|
|
*
|
|
* Where should we start from? If we had SKSV data,
|
|
* start from offset 18, else from offset 15.
|
|
*
|
|
* From that point until the end of the buffer, check for any
|
|
* nonzero data. If we have some, go back and print the lot,
|
|
* otherwise we're done.
|
|
*/
|
|
if (sbs)
|
|
i = 18;
|
|
else
|
|
i = 15;
|
|
for (j = i; j < sizeof (*sense); j++)
|
|
if (s[j])
|
|
break;
|
|
if (j == sizeof (*sense))
|
|
return;
|
|
|
|
printf("\n Additional Sense Information (byte %d out...):\n", i);
|
|
if (i == 15) {
|
|
printf("\n\t%2d:", i);
|
|
k = 7;
|
|
} else {
|
|
printf("\n\t%2d:", i);
|
|
k = 2;
|
|
j -= 2;
|
|
}
|
|
while (j > 0) {
|
|
if (i >= sizeof (*sense))
|
|
break;
|
|
if (k == 8) {
|
|
k = 0;
|
|
printf("\n\t%2d:", i);
|
|
}
|
|
printf(" 0x%02x", s[i] & 0xff);
|
|
k++;
|
|
j--;
|
|
i++;
|
|
}
|
|
printf("\n\n");
|
|
}
|
|
|
|
char *
|
|
scsipi_decode_sense(void *sinfo, int flag)
|
|
{
|
|
unsigned char *snsbuf;
|
|
unsigned char skey;
|
|
static char rqsbuf[132];
|
|
|
|
skey = 0;
|
|
|
|
snsbuf = (unsigned char *) sinfo;
|
|
if (flag == 0 || flag == 2 || flag == 3)
|
|
skey = snsbuf[2] & 0xf;
|
|
if (flag == 0) { /* Sense Key Only */
|
|
(void) strlcpy(rqsbuf, sense_keys[skey], sizeof(rqsbuf));
|
|
return (rqsbuf);
|
|
} else if (flag == 1) { /* ASC/ASCQ Only */
|
|
asc2ascii(snsbuf[12], snsbuf[13], rqsbuf, sizeof(rqsbuf));
|
|
return (rqsbuf);
|
|
} else if (flag == 2) { /* Sense Key && ASC/ASCQ */
|
|
auto char localbuf[64];
|
|
asc2ascii(snsbuf[12], snsbuf[13], localbuf, sizeof(localbuf));
|
|
(void) snprintf(rqsbuf, sizeof(rqsbuf), "%s, %s",
|
|
sense_keys[skey], localbuf);
|
|
return (rqsbuf);
|
|
} else if (flag == 3 && snsbuf[7] >= 9 && (snsbuf[15] & 0x80)) {
|
|
/*
|
|
* SKSV Data
|
|
*/
|
|
switch (skey) {
|
|
case SKEY_ILLEGAL_REQUEST:
|
|
if (snsbuf[15] & 0x8)
|
|
(void)snprintf(rqsbuf, sizeof(rqsbuf),
|
|
"Error in %s, Offset %d, bit %d",
|
|
(snsbuf[15] & 0x40)? "CDB" : "Parameters",
|
|
(snsbuf[16] & 0xff) << 8 |
|
|
(snsbuf[17] & 0xff), snsbuf[15] & 0x7);
|
|
else
|
|
(void)snprintf(rqsbuf, sizeof(rqsbuf),
|
|
"Error in %s, Offset %d",
|
|
(snsbuf[15] & 0x40)? "CDB" : "Parameters",
|
|
(snsbuf[16] & 0xff) << 8 |
|
|
(snsbuf[17] & 0xff));
|
|
return (rqsbuf);
|
|
case SKEY_RECOVERED_ERROR:
|
|
case SKEY_MEDIUM_ERROR:
|
|
case SKEY_HARDWARE_ERROR:
|
|
(void)snprintf(rqsbuf, sizeof(rqsbuf),
|
|
"Actual Retry Count: %d",
|
|
(snsbuf[16] & 0xff) << 8 | (snsbuf[17] & 0xff));
|
|
return (rqsbuf);
|
|
case SKEY_NOT_READY:
|
|
(void)snprintf(rqsbuf, sizeof(rqsbuf),
|
|
"Progress Indicator: %d",
|
|
(snsbuf[16] & 0xff) << 8 | (snsbuf[17] & 0xff));
|
|
return (rqsbuf);
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
return (NULL);
|
|
}
|
|
|
|
void
|
|
scsipi_print_sense(struct scsipi_xfer *xs, int verbosity)
|
|
{
|
|
scsipi_printaddr(xs->xs_periph);
|
|
printf(" Check Condition on CDB: ");
|
|
scsipi_print_cdb(xs->cmd);
|
|
printf("\n");
|
|
scsipi_print_sense_data(&xs->sense.scsi_sense, verbosity);
|
|
}
|