NetBSD/sys/dev/scsipi/ss_mustek.c

616 lines
18 KiB
C

/* $NetBSD: ss_mustek.c,v 1.10 1999/04/05 19:19:34 mycroft Exp $ */
/*
* Copyright (c) 1995 Joachim Koenig-Baltes. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Joachim Koenig-Baltes.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* special driver for MUSTEK flatbed scanners MFS 06000CX and MFS 12000CX
* these scanners come with their own scsi card, containing an NCR53C400
* SCSI controller chip. I'm in the progress of writing a driver for this
* card to work under NetBSD-current. I've hooked it up to a Seagate ST01
* hostadapter in the meantime, giving 350KB/sec for higher resolutions!
*
* I tried to connect it to my Adaptec 1542B, but with no success. It seems,
* it does not like synchronous negotiation between Hostadapter and other
* targets, but I could not turn this off for the 1542B.
*
* There is also an other reason why you would not like to connect it to your
* favourite SCSI host adapter: The Mustek DOES NOT DISCONNECT. It will block
* other traffic from the bus while a transfer is active.
*/
#include <sys/types.h>
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/fcntl.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/device.h>
#include <sys/conf.h> /* for cdevsw */
#include <sys/scanio.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsi_scanner.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/scsipi/ssvar.h>
#include <dev/scsipi/ss_mustek.h>
#define MUSTEK_RETRIES 4
int mustek_get_params __P((struct ss_softc *));
int mustek_set_params __P((struct ss_softc *, struct scan_io *));
int mustek_trigger_scanner __P((struct ss_softc *));
void mustek_minphys __P((struct ss_softc *, struct buf *));
int mustek_read __P((struct ss_softc *, struct buf *));
int mustek_rewind_scanner __P((struct ss_softc *));
/* only used internally */
int mustek_get_status __P((struct ss_softc *, int, int));
void mustek_compute_sizes __P((struct ss_softc *));
/*
* structure for the special handlers
*/
struct ss_special mustek_special = {
mustek_set_params,
mustek_trigger_scanner,
mustek_get_params,
mustek_minphys,
mustek_read,
mustek_rewind_scanner,
NULL, /* no adf support right now */
NULL /* no adf support right now */
};
/*
* mustek_attach: attach special functions to ss
*/
void
mustek_attach(ss, sa)
struct ss_softc *ss;
struct scsipibus_attach_args *sa;
{
#ifdef SCSIDEBUG
struct scsipi_link *sc_link = sa->sa_sc_link;
#endif
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_attach: start\n"));
ss->sio.scan_scanner_type = 0;
printf("\n%s: ", ss->sc_dev.dv_xname);
/* first, check the model which determines resolutions */
if (!bcmp(sa->sa_inqbuf.product, "MFS-06000CX", 11)) {
ss->sio.scan_scanner_type = MUSTEK_06000CX;
printf("Mustek 6000CX Flatbed 3-pass color scanner, 3 - 600 dpi\n");
}
if (!bcmp(sa->sa_inqbuf.product, "MFS-12000CX", 11)) {
ss->sio.scan_scanner_type = MUSTEK_12000CX;
printf("Mustek 12000CX Flatbed 3-pass color scanner, 6 - 1200 dpi\n");
}
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_attach: scanner_type = %d\n",
ss->sio.scan_scanner_type));
/* install special handlers */
ss->special = &mustek_special;
/*
* populate the scanio struct with legal values
* the default should come from user space
*/
ss->sio.scan_width = 1200;
ss->sio.scan_height = 1200;
ss->sio.scan_x_resolution = 99;
ss->sio.scan_y_resolution = 99;
ss->sio.scan_x_origin = 0;
ss->sio.scan_y_origin = 0;
ss->sio.scan_brightness = 100;
ss->sio.scan_contrast = 100;
ss->sio.scan_quality = 100;
ss->sio.scan_image_mode = SIM_GRAYSCALE;
mustek_compute_sizes(ss);
}
int
mustek_get_params (ss)
struct ss_softc *ss;
{
return (0);
}
/*
* check the parameters if the mustek is capable of fulfilling it
* but don't send the command to the scanner in case the user wants
* to change parameters by more than one call
*/
int
mustek_set_params(ss, sio)
struct ss_softc *ss;
struct scan_io *sio;
{
int error;
/*
* if the scanner is triggered, then rewind it
*/
if (ss->flags & SSF_TRIGGERED) {
error = mustek_rewind_scanner(ss);
if (error)
return (error);
}
/* size constraints: 8.5" horizontally and 14" vertically */
#ifdef MUSTEK_INCH_SPEC
/* sizes must be a multiple of 1/8" */
sio->scan_x_origin -= sio->scan_x_origin % 150;
sio->scan_y_origin -= sio->scan_y_origin % 150;
sio->scan_width -= sio->scan_width % 150;
sio->scan_height -= sio->scan_height % 150;
#endif
if (sio->scan_width == 0 ||
sio->scan_x_origin + sio->scan_width > 10200 ||
sio->scan_height == 0 ||
sio->scan_y_origin + sio->scan_height > 16800)
return (EINVAL);
/*
* for now, only realize the values for the MUSTEK_06000CX
* in the future, values for the MUSTEK_12000CX will be implemented
*/
/*
* resolution (dpi) must be <= 300 and a multiple of 3 or
* between 300 and 600 and a multiple of 30
*/
sio->scan_x_resolution -= sio->scan_x_resolution <= 300 ?
sio->scan_x_resolution % 3 : sio->scan_x_resolution % 30;
sio->scan_y_resolution -= sio->scan_y_resolution <= 300 ?
sio->scan_y_resolution % 3 : sio->scan_y_resolution % 30;
if (sio->scan_x_resolution < 3 || sio->scan_x_resolution > 600 ||
sio->scan_x_resolution != sio->scan_y_resolution)
return (EINVAL);
/* assume brightness values are between 64 and 136 in steps of 3 */
sio->scan_brightness -= (sio->scan_brightness - 64) % 3;
if (sio->scan_brightness < 64 || sio->scan_brightness > 136)
return (EINVAL);
/* contrast values must be between 16 and 184 in steps of 7 */
sio->scan_contrast -= (sio->scan_contrast - 16) % 7;
if (sio->scan_contrast < 16 || sio->scan_contrast > 184)
return (EINVAL);
/*
* velocity: between 0 (fast) and 4 (slow) which will be mapped
* to 100% = 4, 80% = 3, 60% = 2, 40% = 1, 20% = 0
* must be a multiple of 20
*/
sio->scan_quality -= sio->scan_quality % 20;
if (sio->scan_quality < 20 || sio->scan_quality > 100)
return (EINVAL);
switch (sio->scan_image_mode) {
case SIM_BINARY_MONOCHROME:
case SIM_DITHERED_MONOCHROME:
case SIM_GRAYSCALE:
case SIM_RED:
case SIM_GREEN:
case SIM_BLUE:
break;
default:
return (EINVAL);
}
/* change ss_softc to the new values, but save ro-variables */
sio->scan_scanner_type = ss->sio.scan_scanner_type;
bcopy(sio, &ss->sio, sizeof(struct scan_io));
mustek_compute_sizes(ss);
return (0);
}
/*
* trim the requested transfer to a multiple of the line size
* this is called only from ssread() which guarantees, scanner is triggered
* In the future, it will trim the transfer to not read to much at a time
* because the mustek cannot disconnect. It will be calculated by the
* resolution, the velocity and the number of bytes per line.
*/
void
mustek_minphys(ss, bp)
struct ss_softc *ss;
struct buf *bp;
{
#ifdef SCSIDEBUG
struct scsipi_link *sc_link = ss->sc_link;
#endif
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_minphys: before: %ld\n",
bp->b_bcount));
bp->b_bcount -= bp->b_bcount %
((ss->sio.scan_pixels_per_line * ss->sio.scan_bits_per_pixel) / 8);
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_minphys: after: %ld\n",
bp->b_bcount));
}
/*
* trigger the scanner to start a scan operation
* this includes sending the mode- and window-data, starting the scanner
* and getting the image size info
*/
int
mustek_trigger_scanner(ss)
struct ss_softc *ss;
{
struct mustek_mode_select_cmd mode_cmd;
struct mustek_mode_select_data mode_data;
struct mustek_set_window_cmd window_cmd;
struct mustek_set_window_data window_data;
struct mustek_start_scan_cmd start_scan_cmd;
struct scsipi_link *sc_link = ss->sc_link;
int pixel_tlx, pixel_tly, pixel_brx, pixel_bry, paperlength;
int error;
mustek_compute_sizes(ss);
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_trigger_scanner\n"));
/*
* set the window params and send the scsi command
*/
bzero(&window_cmd, sizeof(window_cmd));
window_cmd.opcode = MUSTEK_SET_WINDOW;
window_cmd.length = sizeof(window_data);
bzero(&window_data, sizeof(window_data));
window_data.frame.header = MUSTEK_LINEART_BACKGROUND | MUSTEK_UNIT_SPEC;
#ifdef MUSTEK_INCH_SPEC
/* the positional values are all 1 byte because 256 / 8 = 32" */
pixel_tlx = ss->sio.scan_x_origin / 150;
pixel_tly = ss->sio.scan_y_origin / 150;
pixel_brx = pixel_tlx + ss->sio.scan_width / 150;
pixel_bry = pixel_tly + ss->sio.scan_height / 150;
#else
pixel_tlx = (ss->sio.scan_x_origin * ss->sio.scan_x_resolution) / 1200;
pixel_tly = (ss->sio.scan_y_origin * ss->sio.scan_y_resolution) / 1200;
pixel_brx = pixel_tlx +
(ss->sio.scan_width * ss->sio.scan_x_resolution) / 1200;
pixel_bry = pixel_tly +
(ss->sio.scan_height * ss->sio.scan_y_resolution) / 1200;
#endif
_lto2l(pixel_tlx, window_data.frame.tl_x);
_lto2l(pixel_tly, window_data.frame.tl_y);
_lto2l(pixel_brx, window_data.frame.br_x);
_lto2l(pixel_bry, window_data.frame.br_y);
#if MUSTEK_WINDOWS >= 1
window_data.window1 = window_data.frame;
window_data.window1.header = MUSTEK_WINDOW_MASK | MUSTEK_UNIT_SPEC;
#endif
/* send the set window command to the scanner */
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_set_parms: set_window\n"));
error = scsipi_command(sc_link,
(struct scsipi_generic *) &window_cmd,
sizeof(window_cmd), (u_char *) &window_data, sizeof(window_data),
MUSTEK_RETRIES, 5000, NULL, SCSI_DATA_OUT);
if (error)
return (error);
/*
* do what it takes to actualize the mode
*/
bzero(&mode_cmd, sizeof(mode_cmd));
mode_cmd.opcode = MUSTEK_MODE_SELECT;
_lto2b(sizeof(mode_data), mode_cmd.length);
bzero(&mode_data, sizeof(mode_data));
mode_data.mode =
MUSTEK_MODE_MASK | MUSTEK_HT_PATTERN_BUILTIN | MUSTEK_UNIT_SPEC;
if (ss->sio.scan_x_resolution <= 300) {
mode_data.resolution = ss->sio.scan_x_resolution / 3;
} else {
/*
* the resolution values is computed by modulo 100, but not
* for 600dpi, where the value is 100 (a bit tricky, but ...)
*/
mode_data.resolution =
((ss->sio.scan_x_resolution - 1) % 100) + 1;
}
mode_data.brightness = (ss->sio.scan_brightness - 64) / 3;
mode_data.contrast = (ss->sio.scan_contrast - 16) / 7;
mode_data.grain = 0;
mode_data.velocity = ss->sio.scan_quality / 20 - 1;
#ifdef MUSTEK_INCH_SPEC
paperlength = 14 * 8; /* 14" */
#else
paperlength = 14 * ss->sio.scan_y_resolution; /* 14" */
#endif
_lto2l(paperlength, mode_data.paperlength);
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_trigger_scanner: mode_select\n"));
/* send the command to the scanner */
error = scsipi_command(sc_link,
(struct scsipi_generic *) &mode_cmd,
sizeof(mode_cmd), (u_char *) &mode_data, sizeof(mode_data),
MUSTEK_RETRIES, 5000, NULL, SCSI_DATA_OUT);
if (error)
return (error);
/*
* now construct and send the start command
*/
bzero(&start_scan_cmd,sizeof(start_scan_cmd));
start_scan_cmd.opcode = MUSTEK_START_STOP;
start_scan_cmd.mode = MUSTEK_SCAN_START;
if (ss->sio.scan_x_resolution <= 300)
start_scan_cmd.mode |= MUSTEK_RES_STEP_1;
else
start_scan_cmd.mode |= MUSTEK_RES_STEP_10;
switch (ss->sio.scan_image_mode) {
case SIM_BINARY_MONOCHROME:
case SIM_DITHERED_MONOCHROME:
start_scan_cmd.mode |= MUSTEK_BIT_MODE | MUSTEK_GRAY_FILTER;
break;
case SIM_GRAYSCALE:
start_scan_cmd.mode |= MUSTEK_GRAY_MODE | MUSTEK_GRAY_FILTER;
break;
case SIM_RED:
start_scan_cmd.mode |= MUSTEK_GRAY_MODE | MUSTEK_RED_FILTER;
break;
case SIM_GREEN:
start_scan_cmd.mode |= MUSTEK_GRAY_MODE | MUSTEK_GREEN_FILTER;
break;
case SIM_BLUE:
start_scan_cmd.mode |= MUSTEK_GRAY_MODE | MUSTEK_BLUE_FILTER;
break;
}
/* send the command to the scanner */
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_trigger_scanner: start_scan\n"));
error = scsipi_command(sc_link,
(struct scsipi_generic *) &start_scan_cmd,
sizeof(start_scan_cmd), NULL, 0,
MUSTEK_RETRIES, 5000, NULL, 0);
if (error)
return (error);
/*
* now check if scanner ready this time with update of size info
* we wait here so that if the user issues a read directly afterwards,
* the scanner will respond directly (otherwise we had to sleep with
* a buffer locked in memory)
*/
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_trigger_scanner: get_status\n"));
error = mustek_get_status(ss, 60, 1);
if (error)
return (error);
return (0);
}
/*
* stop a scan operation in progress
*/
int
mustek_rewind_scanner(ss)
struct ss_softc *ss;
{
struct mustek_start_scan_cmd cmd;
struct scsipi_link *sc_link = ss->sc_link;
int error;
if (ss->sio.scan_window_size != 0) {
/*
* only if not all data has been read, the scanner has to be
* stopped
*/
bzero(&cmd, sizeof(cmd));
cmd.opcode = MUSTEK_START_STOP;
cmd.mode = MUSTEK_SCAN_STOP;
/* send the command to the scanner */
SC_DEBUG(sc_link, SDEV_DB1,
("mustek_rewind_scanner: stop_scan\n"));
error = scsipi_command(sc_link,
(struct scsipi_generic *) &cmd,
sizeof(cmd), NULL, 0, MUSTEK_RETRIES, 5000, NULL, 0);
if (error)
return (error);
}
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_rewind_scanner: end\n"));
return (0);
}
/*
* read the requested number of bytes/lines from the scanner
*/
int
mustek_read(ss, bp)
struct ss_softc *ss;
struct buf *bp;
{
struct mustek_read_cmd cmd;
struct scsipi_link *sc_link = ss->sc_link;
u_long lines_to_read;
int error;
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_read: start\n"));
bzero(&cmd, sizeof(cmd));
cmd.opcode = MUSTEK_READ;
/* instead of the bytes, the mustek wants the number of lines */
lines_to_read = bp->b_bcount /
((ss->sio.scan_pixels_per_line * ss->sio.scan_bits_per_pixel) / 8);
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_read: read %ld lines\n",
lines_to_read));
_lto3b(lines_to_read, cmd.length);
/*
* go ask the adapter to do all this for us
*/
error = scsipi_command(sc_link,
(struct scsipi_generic *) &cmd, sizeof(cmd),
(u_char *) bp->b_data, bp->b_bcount, MUSTEK_RETRIES, 10000, bp,
SCSI_NOSLEEP | SCSI_DATA_IN);
if (error) {
printf("%s: not queued, error %d\n", ss->sc_dev.dv_xname,
error);
} else {
ss->sio.scan_lines -= lines_to_read;
if (ss->sio.scan_lines < 0)
ss->sio.scan_lines = 0;
ss->sio.scan_window_size -= bp->b_bcount;
if (ss->sio.scan_window_size < 0)
ss->sio.scan_window_size = 0;
}
return (0);
}
/*
* check if the scanner is ready to take commands
* wait timeout seconds and try only every second
* if update, then update picture size info
*
* returns EBUSY if scanner not ready
*/
int
mustek_get_status(ss, timeout, update)
struct ss_softc *ss;
int timeout, update;
{
struct mustek_get_status_cmd cmd;
struct mustek_get_status_data data;
struct scsipi_link *sc_link = ss->sc_link;
int error, lines, bytes_per_line;
bzero(&cmd, sizeof(cmd));
cmd.opcode = MUSTEK_GET_STATUS;
cmd.length = sizeof(data);
while (1) {
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_get_status: stat_cmd\n"));
error = scsipi_command(sc_link,
(struct scsipi_generic *) &cmd, sizeof(cmd),
(u_char *) &data, sizeof(data), MUSTEK_RETRIES,
5000, NULL, SCSI_DATA_IN);
if (error)
return (error);
if ((data.ready_busy == MUSTEK_READY) ||
(timeout-- <= 0))
break;
/* please wait a second */
tsleep((caddr_t)mustek_get_status, PRIBIO + 1, "mtkrdy", hz);
}
if (update) {
bytes_per_line = _2ltol(data.bytes_per_line);
lines = _3ltol(data.lines);
if (lines != ss->sio.scan_lines) {
printf("mustek: lines actual(%d) != computed(%ld)\n",
lines, ss->sio.scan_lines);
return (EIO);
}
if (bytes_per_line * lines != ss->sio.scan_window_size) {
printf("mustek: win-size actual(%d) != computed(%ld)\n",
bytes_per_line * lines, ss->sio.scan_window_size);
return (EIO);
}
SC_DEBUG(sc_link, SDEV_DB1,
("mustek_get_size: bpl=%ld, lines=%ld\n",
(ss->sio.scan_pixels_per_line * ss->sio.scan_bits_per_pixel) / 8,
ss->sio.scan_lines));
SC_DEBUG(sc_link, SDEV_DB1, ("window size = %ld\n",
ss->sio.scan_window_size));
}
SC_DEBUG(sc_link, SDEV_DB1, ("mustek_get_status: end\n"));
if (data.ready_busy == MUSTEK_READY)
return (0);
else
return (EBUSY);
}
/*
* mustek_compute_sizes: compute window_size and lines for the picture
* this function is called from different places in the code
*/
void
mustek_compute_sizes(ss)
struct ss_softc *ss;
{
switch (ss->sio.scan_image_mode) {
case SIM_BINARY_MONOCHROME:
case SIM_DITHERED_MONOCHROME:
ss->sio.scan_bits_per_pixel = 1;
break;
case SIM_GRAYSCALE:
case SIM_RED:
case SIM_GREEN:
case SIM_BLUE:
ss->sio.scan_bits_per_pixel = 8;
break;
}
/*
* horizontal number of bytes is always a multiple of 2,
* in 8-bit mode at least
*/
ss->sio.scan_pixels_per_line =
(ss->sio.scan_width * ss->sio.scan_x_resolution) / 1200;
if (ss->sio.scan_bits_per_pixel == 1)
/* make it a multiple of 16, and thus of 2 bytes */
ss->sio.scan_pixels_per_line =
(ss->sio.scan_pixels_per_line + 15) & 0xfffffff0;
else
ss->sio.scan_pixels_per_line =
(ss->sio.scan_pixels_per_line + 1) & 0xfffffffe;
ss->sio.scan_lines =
(ss->sio.scan_height * ss->sio.scan_y_resolution) / 1200;
ss->sio.scan_window_size = ss->sio.scan_lines *
((ss->sio.scan_pixels_per_line * ss->sio.scan_bits_per_pixel) / 8);
}