557 lines
15 KiB
C
557 lines
15 KiB
C
/* $NetBSD: umass_scsipi.c,v 1.35 2009/10/21 21:12:06 rmind Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2001, 2003 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Lennart Augustsson (lennart@augustsson.net) at
|
|
* Carlstedt Research & Technology and by Charles M. Hamnnum.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: umass_scsipi.c,v 1.35 2009/10/21 21:12:06 rmind Exp $");
|
|
|
|
#include "atapibus.h"
|
|
#include "scsibus.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/bufq.h>
|
|
#include <sys/device.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/malloc.h>
|
|
|
|
/* SCSI & ATAPI */
|
|
#include <sys/scsiio.h>
|
|
#include <dev/scsipi/scsi_spc.h>
|
|
#include <dev/scsipi/scsi_all.h>
|
|
#include <dev/scsipi/scsipi_all.h>
|
|
#include <dev/scsipi/scsiconf.h>
|
|
|
|
#include <dev/scsipi/atapiconf.h>
|
|
|
|
#include <dev/scsipi/scsipi_disk.h>
|
|
#include <dev/scsipi/scsi_disk.h>
|
|
#include <dev/scsipi/scsi_changer.h>
|
|
|
|
#include <sys/disk.h> /* XXX */
|
|
#include <dev/scsipi/sdvar.h> /* XXX */
|
|
|
|
/* USB */
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
#include <dev/usb/usbdevs.h>
|
|
|
|
#include <dev/usb/umassvar.h>
|
|
#include <dev/usb/umass_scsipi.h>
|
|
|
|
struct umass_scsipi_softc {
|
|
struct umassbus_softc base;
|
|
|
|
struct atapi_adapter sc_atapi_adapter;
|
|
#define sc_adapter sc_atapi_adapter._generic
|
|
struct scsipi_channel sc_channel;
|
|
usbd_status sc_sync_status;
|
|
struct scsi_request_sense sc_sense_cmd;
|
|
};
|
|
|
|
|
|
#define SHORT_INQUIRY_LENGTH 36 /* XXX */
|
|
|
|
#define UMASS_ATAPI_DRIVE 0
|
|
|
|
Static void umass_scsipi_request(struct scsipi_channel *,
|
|
scsipi_adapter_req_t, void *);
|
|
Static void umass_scsipi_minphys(struct buf *bp);
|
|
Static int umass_scsipi_ioctl(struct scsipi_channel *, u_long,
|
|
void *, int, usb_proc_ptr );
|
|
Static int umass_scsipi_getgeom(struct scsipi_periph *periph,
|
|
struct disk_parms *, u_long sectors);
|
|
|
|
Static void umass_scsipi_cb(struct umass_softc *sc, void *priv,
|
|
int residue, int status);
|
|
Static void umass_scsipi_sense_cb(struct umass_softc *sc, void *priv,
|
|
int residue, int status);
|
|
|
|
Static struct umass_scsipi_softc *umass_scsipi_setup(struct umass_softc *sc);
|
|
|
|
#if NATAPIBUS > 0
|
|
Static void umass_atapi_probe_device(struct atapibus_softc *, int);
|
|
|
|
const struct scsipi_bustype umass_atapi_bustype = {
|
|
SCSIPI_BUSTYPE_ATAPI,
|
|
atapi_scsipi_cmd,
|
|
atapi_interpret_sense,
|
|
atapi_print_addr,
|
|
scsi_kill_pending,
|
|
};
|
|
#endif
|
|
|
|
|
|
#if NSCSIBUS > 0
|
|
int
|
|
umass_scsi_attach(struct umass_softc *sc)
|
|
{
|
|
struct umass_scsipi_softc *scbus;
|
|
|
|
scbus = umass_scsipi_setup(sc);
|
|
|
|
scbus->sc_channel.chan_bustype = &scsi_bustype;
|
|
scbus->sc_channel.chan_ntargets = 2;
|
|
scbus->sc_channel.chan_nluns = sc->maxlun + 1;
|
|
scbus->sc_channel.chan_id = scbus->sc_channel.chan_ntargets - 1;
|
|
DPRINTF(UDMASS_USB, ("%s: umass_attach_bus: SCSI\n",
|
|
USBDEVNAME(sc->sc_dev)));
|
|
|
|
sc->sc_refcnt++;
|
|
scbus->base.sc_child =
|
|
config_found_ia(sc->sc_dev, "scsi", &scbus->sc_channel,
|
|
scsiprint);
|
|
if (--sc->sc_refcnt < 0)
|
|
usb_detach_wakeup(USBDEV(sc->sc_dev));
|
|
|
|
return (0);
|
|
}
|
|
#endif
|
|
|
|
#if NATAPIBUS > 0
|
|
int
|
|
umass_atapi_attach(struct umass_softc *sc)
|
|
{
|
|
struct umass_scsipi_softc *scbus;
|
|
|
|
scbus = umass_scsipi_setup(sc);
|
|
scbus->sc_atapi_adapter.atapi_probe_device = umass_atapi_probe_device;
|
|
|
|
scbus->sc_channel.chan_bustype = &umass_atapi_bustype;
|
|
scbus->sc_channel.chan_ntargets = 2;
|
|
scbus->sc_channel.chan_nluns = 1;
|
|
|
|
scbus->sc_channel.chan_defquirks |= sc->sc_busquirks;
|
|
DPRINTF(UDMASS_USB, ("%s: umass_attach_bus: ATAPI\n",
|
|
USBDEVNAME(sc->sc_dev)));
|
|
|
|
sc->sc_refcnt++;
|
|
scbus->base.sc_child =
|
|
config_found_ia(sc->sc_dev, "atapi", &scbus->sc_channel,
|
|
atapiprint);
|
|
if (--sc->sc_refcnt < 0)
|
|
usb_detach_wakeup(USBDEV(sc->sc_dev));
|
|
|
|
return (0);
|
|
}
|
|
#endif
|
|
|
|
Static struct umass_scsipi_softc *
|
|
umass_scsipi_setup(struct umass_softc *sc)
|
|
{
|
|
struct umass_scsipi_softc *scbus;
|
|
|
|
scbus = malloc(sizeof *scbus, M_DEVBUF, M_WAITOK | M_ZERO);
|
|
sc->bus = &scbus->base;
|
|
|
|
/* Only use big commands for USB SCSI devices. */
|
|
sc->sc_busquirks |= PQUIRK_ONLYBIG;
|
|
|
|
/* Fill in the adapter. */
|
|
memset(&scbus->sc_adapter, 0, sizeof(scbus->sc_adapter));
|
|
scbus->sc_adapter.adapt_dev = sc->sc_dev;
|
|
scbus->sc_adapter.adapt_nchannels = 1;
|
|
scbus->sc_adapter.adapt_request = umass_scsipi_request;
|
|
scbus->sc_adapter.adapt_minphys = umass_scsipi_minphys;
|
|
scbus->sc_adapter.adapt_ioctl = umass_scsipi_ioctl;
|
|
scbus->sc_adapter.adapt_getgeom = umass_scsipi_getgeom;
|
|
|
|
/* Fill in the channel. */
|
|
memset(&scbus->sc_channel, 0, sizeof(scbus->sc_channel));
|
|
scbus->sc_channel.chan_adapter = &scbus->sc_adapter;
|
|
scbus->sc_channel.chan_channel = 0;
|
|
scbus->sc_channel.chan_flags = SCSIPI_CHAN_OPENINGS | SCSIPI_CHAN_NOSETTLE;
|
|
scbus->sc_channel.chan_openings = 1;
|
|
scbus->sc_channel.chan_max_periph = 1;
|
|
scbus->sc_channel.chan_defquirks |= sc->sc_busquirks;
|
|
|
|
return (scbus);
|
|
}
|
|
|
|
Static void
|
|
umass_scsipi_request(struct scsipi_channel *chan,
|
|
scsipi_adapter_req_t req, void *arg)
|
|
{
|
|
struct scsipi_adapter *adapt = chan->chan_adapter;
|
|
struct scsipi_periph *periph;
|
|
struct scsipi_xfer *xs;
|
|
struct umass_softc *sc = device_private(adapt->adapt_dev);
|
|
struct umass_scsipi_softc *scbus = (struct umass_scsipi_softc *)sc->bus;
|
|
struct scsipi_generic *cmd;
|
|
int cmdlen;
|
|
int dir;
|
|
#ifdef UMASS_DEBUG
|
|
microtime(&sc->tv);
|
|
#endif
|
|
switch(req) {
|
|
case ADAPTER_REQ_RUN_XFER:
|
|
xs = arg;
|
|
periph = xs->xs_periph;
|
|
DIF(UDMASS_UPPER, periph->periph_dbflags |= SCSIPI_DEBUG_FLAGS);
|
|
|
|
DPRINTF(UDMASS_CMD, ("%s: umass_scsi_cmd: at %"PRIu64".%06"PRIu64": %d:%d "
|
|
"xs=%p cmd=0x%02x datalen=%d (quirks=0x%x, poll=%d)\n",
|
|
USBDEVNAME(sc->sc_dev), sc->tv.tv_sec, (uint64_t)sc->tv.tv_usec,
|
|
periph->periph_target, periph->periph_lun,
|
|
xs, xs->cmd->opcode, xs->datalen,
|
|
periph->periph_quirks, xs->xs_control & XS_CTL_POLL));
|
|
#if defined(USB_DEBUG) && defined(SCSIPI_DEBUG)
|
|
if (umassdebug & UDMASS_SCSI)
|
|
show_scsipi_xs(xs);
|
|
else if (umassdebug & ~UDMASS_CMD)
|
|
show_scsipi_cmd(xs);
|
|
#endif
|
|
|
|
if (sc->sc_dying) {
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
goto done;
|
|
}
|
|
|
|
#ifdef UMASS_DEBUG
|
|
if (chan->chan_bustype->bustype_type == SCSIPI_BUSTYPE_ATAPI ?
|
|
periph->periph_target != UMASS_ATAPI_DRIVE :
|
|
periph->periph_target == chan->chan_id) {
|
|
DPRINTF(UDMASS_SCSI, ("%s: wrong SCSI ID %d\n",
|
|
USBDEVNAME(sc->sc_dev),
|
|
periph->periph_target));
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
goto done;
|
|
}
|
|
#endif
|
|
|
|
cmd = xs->cmd;
|
|
cmdlen = xs->cmdlen;
|
|
|
|
dir = DIR_NONE;
|
|
if (xs->datalen) {
|
|
switch (xs->xs_control &
|
|
(XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
|
|
case XS_CTL_DATA_IN:
|
|
dir = DIR_IN;
|
|
break;
|
|
case XS_CTL_DATA_OUT:
|
|
dir = DIR_OUT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (xs->datalen > UMASS_MAX_TRANSFER_SIZE) {
|
|
printf("umass_cmd: large datalen, %d\n", xs->datalen);
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
goto done;
|
|
}
|
|
|
|
if (xs->xs_control & XS_CTL_POLL) {
|
|
/* Use sync transfer. XXX Broken! */
|
|
DPRINTF(UDMASS_SCSI,
|
|
("umass_scsi_cmd: sync dir=%d\n", dir));
|
|
sc->sc_xfer_flags = USBD_SYNCHRONOUS;
|
|
scbus->sc_sync_status = USBD_INVAL;
|
|
sc->sc_methods->wire_xfer(sc, periph->periph_lun, cmd,
|
|
cmdlen, xs->data,
|
|
xs->datalen, dir,
|
|
xs->timeout, 0, xs);
|
|
sc->sc_xfer_flags = 0;
|
|
DPRINTF(UDMASS_SCSI, ("umass_scsi_cmd: done err=%d\n",
|
|
scbus->sc_sync_status));
|
|
switch (scbus->sc_sync_status) {
|
|
case USBD_NORMAL_COMPLETION:
|
|
xs->error = XS_NOERROR;
|
|
break;
|
|
case USBD_TIMEOUT:
|
|
xs->error = XS_TIMEOUT;
|
|
break;
|
|
default:
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
break;
|
|
}
|
|
goto done;
|
|
} else {
|
|
DPRINTF(UDMASS_SCSI,
|
|
("umass_scsi_cmd: async dir=%d, cmdlen=%d"
|
|
" datalen=%d\n",
|
|
dir, cmdlen, xs->datalen));
|
|
sc->sc_methods->wire_xfer(sc, periph->periph_lun, cmd,
|
|
cmdlen, xs->data,
|
|
xs->datalen, dir,
|
|
xs->timeout,
|
|
umass_scsipi_cb, xs);
|
|
return;
|
|
}
|
|
|
|
/* Return if command finishes early. */
|
|
done:
|
|
scsipi_done(xs);
|
|
return;
|
|
default:
|
|
/* Not supported, nothing to do. */
|
|
;
|
|
}
|
|
}
|
|
|
|
Static void
|
|
umass_scsipi_minphys(struct buf *bp)
|
|
{
|
|
#ifdef DIAGNOSTIC
|
|
if (bp->b_bcount <= 0) {
|
|
printf("umass_scsipi_minphys count(%d) <= 0\n",
|
|
bp->b_bcount);
|
|
bp->b_bcount = UMASS_MAX_TRANSFER_SIZE;
|
|
}
|
|
#endif
|
|
if (bp->b_bcount > UMASS_MAX_TRANSFER_SIZE)
|
|
bp->b_bcount = UMASS_MAX_TRANSFER_SIZE;
|
|
minphys(bp);
|
|
}
|
|
|
|
int
|
|
umass_scsipi_ioctl(struct scsipi_channel *chan, u_long cmd,
|
|
void *arg, int flag, usb_proc_ptr p)
|
|
{
|
|
/*struct umass_softc *sc = link->adapter_softc;*/
|
|
/*struct umass_scsipi_softc *scbus = sc->bus;*/
|
|
|
|
switch (cmd) {
|
|
#if 0
|
|
case SCBUSIORESET:
|
|
ccb->ccb_h.status = CAM_REQ_INPROG;
|
|
umass_reset(sc, umass_cam_cb, (void *) ccb);
|
|
return (0);
|
|
#endif
|
|
default:
|
|
return (ENOTTY);
|
|
}
|
|
}
|
|
|
|
Static int
|
|
umass_scsipi_getgeom(struct scsipi_periph *periph, struct disk_parms *dp,
|
|
u_long sectors)
|
|
{
|
|
struct umass_softc *sc =
|
|
device_private(periph->periph_channel->chan_adapter->adapt_dev);
|
|
|
|
/* If it's not a floppy, we don't know what to do. */
|
|
if (sc->sc_cmd != UMASS_CPROTO_UFI)
|
|
return (0);
|
|
|
|
switch (sectors) {
|
|
case 1440:
|
|
/* Most likely a single density 3.5" floppy. */
|
|
dp->heads = 2;
|
|
dp->sectors = 9;
|
|
dp->cyls = 80;
|
|
return (1);
|
|
case 2880:
|
|
/* Most likely a double density 3.5" floppy. */
|
|
dp->heads = 2;
|
|
dp->sectors = 18;
|
|
dp->cyls = 80;
|
|
return (1);
|
|
default:
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
Static void
|
|
umass_scsipi_cb(struct umass_softc *sc, void *priv, int residue, int status)
|
|
{
|
|
struct umass_scsipi_softc *scbus = (struct umass_scsipi_softc *)sc->bus;
|
|
struct scsipi_xfer *xs = priv;
|
|
struct scsipi_periph *periph = xs->xs_periph;
|
|
int cmdlen;
|
|
int s;
|
|
#ifdef UMASS_DEBUG
|
|
struct timeval tv;
|
|
u_int delta;
|
|
microtime(&tv);
|
|
delta = (tv.tv_sec - sc->tv.tv_sec) * 1000000 + tv.tv_usec - sc->tv.tv_usec;
|
|
#endif
|
|
|
|
DPRINTF(UDMASS_CMD,("umass_scsipi_cb: at %"PRIu64".%06"PRIu64", delta=%u: xs=%p residue=%d"
|
|
" status=%d\n", tv.tv_sec, (uint64_t)tv.tv_usec, delta, xs, residue, status));
|
|
|
|
xs->resid = residue;
|
|
|
|
switch (status) {
|
|
case STATUS_CMD_OK:
|
|
xs->error = XS_NOERROR;
|
|
break;
|
|
|
|
case STATUS_CMD_UNKNOWN:
|
|
/* FALLTHROUGH */
|
|
case STATUS_CMD_FAILED:
|
|
/* fetch sense data */
|
|
sc->sc_sense = 1;
|
|
memset(&scbus->sc_sense_cmd, 0, sizeof(scbus->sc_sense_cmd));
|
|
scbus->sc_sense_cmd.opcode = SCSI_REQUEST_SENSE;
|
|
scbus->sc_sense_cmd.byte2 = periph->periph_lun <<
|
|
SCSI_CMD_LUN_SHIFT;
|
|
scbus->sc_sense_cmd.length = sizeof(xs->sense);
|
|
|
|
if (sc->sc_cmd == UMASS_CPROTO_UFI ||
|
|
sc->sc_cmd == UMASS_CPROTO_ATAPI)
|
|
cmdlen = UFI_COMMAND_LENGTH; /* XXX */
|
|
else
|
|
cmdlen = sizeof(scbus->sc_sense_cmd);
|
|
sc->sc_methods->wire_xfer(sc, periph->periph_lun,
|
|
&scbus->sc_sense_cmd, cmdlen,
|
|
&xs->sense, sizeof(xs->sense),
|
|
DIR_IN, xs->timeout,
|
|
umass_scsipi_sense_cb, xs);
|
|
return;
|
|
|
|
case STATUS_WIRE_FAILED:
|
|
xs->error = XS_RESET;
|
|
break;
|
|
|
|
default:
|
|
panic("%s: Unknown status %d in umass_scsipi_cb",
|
|
USBDEVNAME(sc->sc_dev), status);
|
|
}
|
|
|
|
DPRINTF(UDMASS_CMD,("umass_scsipi_cb: at %"PRIu64".%06"PRIu64": return xs->error="
|
|
"%d, xs->xs_status=0x%x xs->resid=%d\n",
|
|
tv.tv_sec, (uint64_t)tv.tv_usec,
|
|
xs->error, xs->xs_status, xs->resid));
|
|
|
|
s = splbio();
|
|
scsipi_done(xs);
|
|
splx(s);
|
|
}
|
|
|
|
/*
|
|
* Finalise a completed autosense operation
|
|
*/
|
|
Static void
|
|
umass_scsipi_sense_cb(struct umass_softc *sc, void *priv, int residue,
|
|
int status)
|
|
{
|
|
struct scsipi_xfer *xs = priv;
|
|
int s;
|
|
|
|
DPRINTF(UDMASS_CMD,("umass_scsipi_sense_cb: xs=%p residue=%d "
|
|
"status=%d\n", xs, residue, status));
|
|
|
|
sc->sc_sense = 0;
|
|
switch (status) {
|
|
case STATUS_CMD_OK:
|
|
case STATUS_CMD_UNKNOWN:
|
|
/* getting sense data succeeded */
|
|
if (residue == 0 || residue == 14)/* XXX */
|
|
xs->error = XS_SENSE;
|
|
else
|
|
xs->error = XS_SHORTSENSE;
|
|
break;
|
|
default:
|
|
DPRINTF(UDMASS_SCSI, ("%s: Autosense failed, status %d\n",
|
|
USBDEVNAME(sc->sc_dev), status));
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
break;
|
|
}
|
|
|
|
DPRINTF(UDMASS_CMD,("umass_scsipi_sense_cb: return xs->error=%d, "
|
|
"xs->xs_status=0x%x xs->resid=%d\n", xs->error, xs->xs_status,
|
|
xs->resid));
|
|
|
|
s = splbio();
|
|
scsipi_done(xs);
|
|
splx(s);
|
|
}
|
|
|
|
#if NATAPIBUS > 0
|
|
Static void
|
|
umass_atapi_probe_device(struct atapibus_softc *atapi, int target)
|
|
{
|
|
struct scsipi_channel *chan = atapi->sc_channel;
|
|
struct scsipi_periph *periph;
|
|
struct scsipibus_attach_args sa;
|
|
char vendor[33], product[65], revision[17];
|
|
struct scsipi_inquiry_data inqbuf;
|
|
|
|
DPRINTF(UDMASS_SCSI,("umass_atapi_probe_device: atapi=%p target=%d\n",
|
|
atapi, target));
|
|
|
|
if (target != UMASS_ATAPI_DRIVE) /* only probe drive 0 */
|
|
return;
|
|
|
|
/* skip if already attached */
|
|
if (scsipi_lookup_periph(chan, target, 0) != NULL)
|
|
return;
|
|
|
|
periph = scsipi_alloc_periph(M_NOWAIT);
|
|
if (periph == NULL) {
|
|
aprint_error_dev(atapi->sc_dev,
|
|
"can't allocate link for drive %d\n", target);
|
|
return;
|
|
}
|
|
|
|
DIF(UDMASS_UPPER, periph->periph_dbflags |= 1); /* XXX 1 */
|
|
periph->periph_channel = chan;
|
|
periph->periph_switch = &atapi_probe_periphsw;
|
|
periph->periph_target = target;
|
|
periph->periph_quirks = chan->chan_defquirks;
|
|
|
|
DPRINTF(UDMASS_SCSI, ("umass_atapi_probe_device: doing inquiry\n"));
|
|
/* Now go ask the device all about itself. */
|
|
memset(&inqbuf, 0, sizeof(inqbuf));
|
|
if (scsipi_inquire(periph, &inqbuf, XS_CTL_DISCOVERY) != 0) {
|
|
DPRINTF(UDMASS_SCSI, ("umass_atapi_probe_device: "
|
|
"scsipi_inquire failed\n"));
|
|
free(periph, M_DEVBUF);
|
|
return;
|
|
}
|
|
|
|
scsipi_strvis(vendor, 33, inqbuf.vendor, 8);
|
|
scsipi_strvis(product, 65, inqbuf.product, 16);
|
|
scsipi_strvis(revision, 17, inqbuf.revision, 4);
|
|
|
|
sa.sa_periph = periph;
|
|
sa.sa_inqbuf.type = inqbuf.device;
|
|
sa.sa_inqbuf.removable = inqbuf.dev_qual2 & SID_REMOVABLE ?
|
|
T_REMOV : T_FIXED;
|
|
if (sa.sa_inqbuf.removable)
|
|
periph->periph_flags |= PERIPH_REMOVABLE;
|
|
sa.sa_inqbuf.vendor = vendor;
|
|
sa.sa_inqbuf.product = product;
|
|
sa.sa_inqbuf.revision = revision;
|
|
sa.sa_inqptr = NULL;
|
|
|
|
DPRINTF(UDMASS_SCSI, ("umass_atapi_probedev: doing atapi_probedev on "
|
|
"'%s' '%s' '%s'\n", vendor, product, revision));
|
|
atapi_probe_device(atapi, target, periph, &sa);
|
|
/* atapi_probe_device() frees the periph when there is no device.*/
|
|
}
|
|
#endif
|