NetBSD/usr.bin/usbhidaction/usbhidaction.1

180 lines
6.0 KiB
Groff

.\" $NetBSD: usbhidaction.1,v 1.16 2018/05/15 01:41:29 jmcneill Exp $
.\"
.\" Copyright (c) 2000 The NetBSD Foundation, Inc.
.\" All rights reserved.
.\"
.\" This code is derived from software contributed to The NetBSD Foundation
.\" by Lennart Augustsson (lennart@augustsson.net).
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd May 14, 2018
.Dt USBHIDACTION 1
.Os
.Sh NAME
.Nm usbhidaction
.Nd perform actions according to USB HID controls
.Sh SYNOPSIS
.Nm
.Fl c Ar config-file
.Op Fl d
.Op Fl i
.Fl f Ar device
.Op Fl p Ar pidfile
.Op Fl t Ar table
.Op Fl v
.Op Ar arg ...
.Sh DESCRIPTION
.Nm
can be used to execute commands when certain values appear on HID controls.
The normal operation for this program is to read the configuration file
and then become a daemon and execute commands as the HID items specify.
If a read from the HID device fails the program dies; this will make it
die when the USB device is unplugged.
.Pp
The options are as follows:
.Bl -tag -width Ds
.It Fl c Ar config-file
Specify a path name for the config file.
When running as a daemon this needs to be an absolute path for the HUP
signal to work.
.It Fl d
Toggle the daemon flag.
.It Fl i
Ignore HID items in the config file that do not exist in the device.
.It Fl f Ar device
Specify a path name for the device to operate on.
If
.Ar device
is numeric, it is taken to be the USB HID device number.
If it is a relative
path, it is taken to be the name of the device under
.Pa /dev .
An absolute path is taken to be the literal device pathname.
.It Fl p Ar pidfile
Writes a file containing the process ID of the program.
The file name has the form
.Pa /var/run/usbhidaction.pid .
If the option is not given,
.Ar pidfile
defaults to
.Pa usbhidaction .
.It Fl t Ar table
Specify a path name for the HID usage table file.
.It Fl v
Be verbose, and do not become a daemon.
.El
.Pp
The config file will be re-read if the process gets a HUP signal.
.Sh CONFIGURATION
The configuration file has a very simple format.
Each line describes an
action; if a line begins with a whitespace it is considered a continuation
of the previous line.
Lines beginning with `#' are considered as comments.
.Pp
Each line has three parts: a name of a USB HID item, a value for that item,
and an action.
There must be whitespace between the parts.
.Pp
The item names are similar to those used by
.Xr usbhidctl 1 ,
but each part must be prefixed by its page name
(use the
.Fl v
flag to
.Xr usbhidctl 1
to see the page name).
Replace spaces in the item name by underscores.
.Pp
The value is simply a numeric value.
When the item reports this value
the action will be performed.
If the value is `*' it will match any value.
.Pp
The action is a normal command that is executed with
.Xr system 3 .
Before it is executed some substitution will occur:
`$n' will be replaced by the nth argument on the
command line, `$V' will be replaced by the numeric value
of the HID item, `$N' will be replaced by the name
of the control, and `$H' will be replaced by the name
of the HID device.
.Sh FILES
.Pa /usr/share/misc/usb_hid_usages
The HID usage table.
.Sh EXAMPLES
The following configuration file can be used to control a pair
of Philips USB speakers with the HID controls on the speakers.
.Bd -literal -offset indent
# Configuration for various Philips USB speakers
Consumer:Consumer_Control.Consumer:Volume_Up 1
mixerctl -f $1 -n -w outputs.master++
Consumer:Consumer_Control.Consumer:Volume_Down 1
mixerctl -f $1 -n -w outputs.master--
Consumer:Consumer_Control.Consumer:Mute 1
mixerctl -f $1 -n -w outputs.mute++
Consumer:Consumer_Control.Consumer:Channel_Top.Microsoft:Base_Up 1
mixerctl -f $1 -n -w outputs.bass++
Consumer:Consumer_Control.Consumer:Channel_Top.Microsoft:Base_Down 1
mixerctl -f $1 -n -w outputs.bass--
.Ed
.Pp
A sample invocation using this configuration would be
.Bd -literal -offset indent
usbhidaction -f /dev/uhid1 -c conf /dev/mixer1
.Ed
.Pp
This configuration file can be used for various keyboards with extra keys:
.Bd -literal -offset indent
# Configuration for extra keyboard keys
Consumer:Consumer_Control.Consumer:Volume_Up 1
mixerctl -n -w outputs.master++
Consumer:Consumer_Control.Consumer:Volume_Down 1
mixerctl -n -w outputs.master--
Consumer:Consumer_Control.Consumer:Mute 1
mixerctl -n -w outputs.mute++
Consumer:Consumer_Control.Consumer:Pause/Play 1
xmms -p
Consumer:Consumer_Control.Consumer:Stop 1
xmms -s
Consumer:Consumer_Control.Consumer:Scan_Previous_Track 1
xmms -r
Consumer:Consumer_Control.Consumer:Scan_Next_Track 1
xmms -f
.Ed
.Pp
And this configuration can be used with, e.g.,
.Bd -literal -offset indent
usbhidaction -f /dev/uhid0 -c conf -i
.Ed
.Sh SEE ALSO
.Xr usbhidctl 1 ,
.Xr usbhid 3 ,
.Xr uhid 4 ,
.Xr usb 4
.Sh HISTORY
The
.Nm
command first appeared in
.Nx 1.6 .