NetBSD/sys/arch/alpha/mcbus/mcbus.c

255 lines
7.1 KiB
C

/* $NetBSD: mcbus.c,v 1.8 2001/05/02 01:24:29 thorpej Exp $ */
/*
* Copyright (c) 1998 by Matthew Jacob
* NASA AMES Research Center.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Autoconfiguration routines for the MCBUS system
* bus found on AlphaServer 4100 systems.
*/
#include <sys/cdefs.h> /* RCS ID & Copyright macro defns */
__KERNEL_RCSID(0, "$NetBSD: mcbus.c,v 1.8 2001/05/02 01:24:29 thorpej Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <machine/autoconf.h>
#include <machine/rpb.h>
#include <machine/pte.h>
#include <alpha/mcbus/mcbusreg.h>
#include <alpha/mcbus/mcbusvar.h>
#include <alpha/pci/mcpciareg.h>
#include "locators.h"
#define KV(_addr) ((caddr_t)ALPHA_PHYS_TO_K0SEG((_addr)))
#define MCPCIA_EXISTS(mid, gid) \
(!badaddr((void *)KV(MCPCIA_BRIDGE_ADDR(gid, mid)), sizeof (u_int32_t)))
extern struct cfdriver mcbus_cd;
struct mcbus_cpu_busdep mcbus_primary;
static int mcbusmatch __P((struct device *, struct cfdata *, void *));
static void mcbusattach __P((struct device *, struct device *, void *));
static int mcbusprint __P((void *, const char *));
static int mcbussbm __P((struct device *, struct cfdata *, void *));
static char *mcbus_node_type_str __P((u_int8_t));
typedef struct {
struct device mcbus_dev;
u_int8_t mcbus_types[MCBUS_MID_MAX];
} mcbus_softc_t;
struct cfattach mcbus_ca = {
sizeof (mcbus_softc_t), mcbusmatch, mcbusattach
};
/*
* Tru64 UNIX (formerly Digital UNIX (formerly DEC OSF/1)) probes for MCPCIAs
* in the following order:
*
* 5, 4, 7, 6
*
* This is so that the built-in CD-ROM on the internal 53c810 is always
* dka500. We probe them in the same order, for consistency.
*/
const int mcbus_mcpcia_probe_order[] = { 5, 4, 7, 6 };
extern void mcpcia_config_cleanup __P((void));
static int
mcbusprint(aux, cp)
void *aux;
const char *cp;
{
struct mcbus_dev_attach_args *tap = aux;
printf(" mid %d: %s", tap->ma_mid, mcbus_node_type_str(tap->ma_type));
return (UNCONF);
}
static int
mcbussbm(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
struct mcbus_dev_attach_args *tap = aux;
if (tap->ma_name != mcbus_cd.cd_name)
return (0);
if (cf->cf_loc[MCBUSCF_MID] != MCBUSCF_MID_DEFAULT &&
cf->cf_loc[MCBUSCF_MID] != tap->ma_mid)
return (0);
return ((*cf->cf_attach->ca_match)(parent, cf, aux));
}
static int
mcbusmatch(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
struct mainbus_attach_args *ma = aux;
/* Make sure we're looking for a MCBUS. */
if (strcmp(ma->ma_name, mcbus_cd.cd_name) != 0)
return (0);
/*
* Only available on 4100 processor type platforms.
*/
if (cputype != ST_DEC_4100)
return (0);
return (1);
}
static void
mcbusattach(parent, self, aux)
struct device *parent;
struct device *self;
void *aux;
{
static const char *bcs[CPU_BCacheMask + 1] = {
"No", "1MB", "2MB", "4MB",
};
struct mcbus_dev_attach_args ta;
mcbus_softc_t *mbp = (mcbus_softc_t *)self;
int i, mid;
printf(": %s BCache\n", mcbus_primary.mcbus_valid ?
bcs[mcbus_primary.mcbus_bcache] : "Unknown");
mbp->mcbus_types[0] = MCBUS_TYPE_RES;
for (mid = 1; mid <= MCBUS_MID_MAX; ++mid)
mbp->mcbus_types[mid] = MCBUS_TYPE_UNK;
/*
* Find and "configure" memory.
*/
ta.ma_name = mcbus_cd.cd_name;
/*
* XXX If we ever support more than one MCBUS, we'll
* XXX have to probe for them, and map them to unit
* XXX numbers.
*/
ta.ma_gid = MCBUS_GID_FROM_INSTANCE(0);
ta.ma_mid = 1;
ta.ma_type = MCBUS_TYPE_MEM;
mbp->mcbus_types[1] = MCBUS_TYPE_MEM;
(void) config_found_sm(self, &ta, mcbusprint, mcbussbm);
/*
* Now find PCI busses.
*/
for (i = 0; i < MCPCIA_PER_MCBUS; i++) {
mid = mcbus_mcpcia_probe_order[i];
ta.ma_name = mcbus_cd.cd_name;
/*
* XXX If we ever support more than one MCBUS, we'll
* XXX have to probe for them, and map them to unit
* XXX numbers.
*/
ta.ma_gid = MCBUS_GID_FROM_INSTANCE(0);
ta.ma_mid = mid;
ta.ma_type = MCBUS_TYPE_PCI;
if (MCPCIA_EXISTS(ta.ma_mid, ta.ma_gid))
(void) config_found_sm(self, &ta, mcbusprint, mcbussbm);
}
#if 0
/*
* Deal with hooking CPU instances to MCBUS module ids.
*
* Note that we do this here because it's the read of
* stupid MCPCIA WHOAMI register that can get us the
* module ID and type of the configuring CPU.
*/
if (mcbus_primary.mcbus_valid) {
mid = mcbus_primary.mcbus_cpu_mid;
printf("%s mid %d: %s %s\n", self->dv_xname,
mid, mcbus_node_type_str(MCBUS_TYPE_CPU),
bcs[mcbus_primary.mcbus_bcache & 0x7]);
ta.ma_name = mcbus_cd.cd_name;
/*
* XXX If we ever support more than one MCBUS, we'll
* XXX have to probe for them, and map them to unit
* XXX numbers.
*/
ta.ma_gid = MCBUS_GID_FROM_INSTANCE(0);
ta.ma_mid = mid;
ta.ma_type = MCBUS_TYPE_CPU;
mbp->mcbus_types[mid] = MCBUS_TYPE_CPU;
(void) config_found_sm(self, &ta, mcbusprint, mcbussbm);
}
#endif
/*
* Now clean up after configuring everything.
*
* This is an unfortunate layering violation- but
* we can't enable interrupts until *all* probing
* is done, but the code and knowledge to clean
* up after probing and to enable interrupts is
* down in the MCPCIA layer.
*/
mcpcia_config_cleanup();
}
static char *
mcbus_node_type_str(type)
u_int8_t type;
{
switch (type) {
case MCBUS_TYPE_RES:
panic ("RESERVED TYPE IN MCBUS_NODE_TYPE_STR");
break;
case MCBUS_TYPE_UNK:
panic ("UNKNOWN TYPE IN MCBUS_NODE_TYPE_STR");
break;
case MCBUS_TYPE_MEM:
return ("Memory");
case MCBUS_TYPE_CPU:
return ("CPU");
case MCBUS_TYPE_PCI:
return ("PCI Bridge");
default:
panic("REALLY UNKNWON (%x) TYPE IN MCBUS_NODE_TYPE_STR", type);
break;
}
}