Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/cardbus/if_tlp_cardbus.c

675 lines
17 KiB
C
Raw Blame History

/* $NetBSD: if_tlp_cardbus.c,v 1.41 2004/05/09 01:39:41 jonathan Exp $ */
/*-
* Copyright (c) 1999, 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* CardBus bus front-end for the Digital Semiconductor ``Tulip'' (21x4x)
* Ethernet controller family driver.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_tlp_cardbus.c,v 1.41 2004/05/09 01:39:41 jonathan Exp $");
#include "opt_inet.h"
#include "opt_ns.h"
#include "bpfilter.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/device.h>
#include <machine/endian.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_ether.h>
#if NBPFILTER > 0
#include <net/bpf.h>
#endif
#ifdef INET
#include <netinet/in.h>
#include <netinet/if_inarp.h>
#endif
#ifdef NS
#include <netns/ns.h>
#include <netns/ns_if.h>
#endif
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/mii/miivar.h>
#include <dev/mii/mii_bitbang.h>
#include <dev/ic/tulipreg.h>
#include <dev/ic/tulipvar.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>
#include <dev/cardbus/cardbusvar.h>
#include <dev/cardbus/cardbusdevs.h>
/*
* PCI configuration space registers used by the Tulip.
*/
#define TULIP_PCI_IOBA 0x10 /* i/o mapped base */
#define TULIP_PCI_MMBA 0x14 /* memory mapped base */
#define TULIP_PCI_CFDA 0x40 /* configuration driver area */
#define CFDA_SLEEP 0x80000000 /* sleep mode */
#define CFDA_SNOOZE 0x40000000 /* snooze mode */
struct tulip_cardbus_softc {
struct tulip_softc sc_tulip; /* real Tulip softc */
/* CardBus-specific goo. */
void *sc_ih; /* interrupt handle */
cardbus_devfunc_t sc_ct; /* our CardBus devfuncs */
cardbustag_t sc_tag; /* our CardBus tag */
int sc_csr; /* CSR bits */
bus_size_t sc_mapsize; /* the size of mapped bus space
region */
int sc_cben; /* CardBus enables */
int sc_bar_reg; /* which BAR to use */
pcireg_t sc_bar_val; /* value of the BAR */
int sc_intrline; /* interrupt line */
};
int tlp_cardbus_match __P((struct device *, struct cfdata *, void *));
void tlp_cardbus_attach __P((struct device *, struct device *, void *));
int tlp_cardbus_detach __P((struct device *, int));
CFATTACH_DECL(tlp_cardbus, sizeof(struct tulip_cardbus_softc),
tlp_cardbus_match, tlp_cardbus_attach, tlp_cardbus_detach, tlp_activate);
const struct tulip_cardbus_product {
u_int32_t tcp_vendor; /* PCI vendor ID */
u_int32_t tcp_product; /* PCI product ID */
tulip_chip_t tcp_chip; /* base Tulip chip type */
} tlp_cardbus_products[] = {
{ PCI_VENDOR_DEC, PCI_PRODUCT_DEC_21142,
TULIP_CHIP_21142 },
{ PCI_VENDOR_XIRCOM, PCI_PRODUCT_XIRCOM_X3201_3_21143,
TULIP_CHIP_X3201_3 },
{ PCI_VENDOR_ADMTEK, PCI_PRODUCT_ADMTEK_AN985,
TULIP_CHIP_AN985 },
{ CARDBUS_VENDOR_ACCTON, CARDBUS_PRODUCT_ACCTON_EN2242,
TULIP_CHIP_AN985 },
{ CARDBUS_VENDOR_ABOCOM, CARDBUS_PRODUCT_ABOCOM_FE2500,
TULIP_CHIP_AN985 },
{ CARDBUS_VENDOR_ABOCOM, CARDBUS_PRODUCT_ABOCOM_PCM200,
TULIP_CHIP_AN985 },
{ CARDBUS_VENDOR_ABOCOM, CARDBUS_PRODUCT_ABOCOM_FE2500MX,
TULIP_CHIP_AN985 },
{ CARDBUS_VENDOR_HAWKING, CARDBUS_PRODUCT_HAWKING_PN672TX,
TULIP_CHIP_AN985 },
{ CARDBUS_VENDOR_NETGEAR, CARDBUS_PRODUCT_NETGEAR_FA511,
TULIP_CHIP_AN985 },
{ 0, 0,
TULIP_CHIP_INVALID },
};
struct tlp_cardbus_quirks {
void (*tpq_func) __P((struct tulip_cardbus_softc *,
const u_int8_t *));
u_int8_t tpq_oui[3];
};
void tlp_cardbus_lxt_quirks __P((struct tulip_cardbus_softc *,
const u_int8_t *));
const struct tlp_cardbus_quirks tlp_cardbus_21142_quirks[] = {
{ tlp_cardbus_lxt_quirks, { 0x00, 0x40, 0x05 } },
{ NULL, { 0, 0, 0 } }
};
void tlp_cardbus_setup __P((struct tulip_cardbus_softc *));
int tlp_cardbus_enable __P((struct tulip_softc *));
void tlp_cardbus_disable __P((struct tulip_softc *));
void tlp_cardbus_power __P((struct tulip_softc *, int));
void tlp_cardbus_x3201_reset __P((struct tulip_softc *));
const struct tulip_cardbus_product *tlp_cardbus_lookup
__P((const struct cardbus_attach_args *));
void tlp_cardbus_get_quirks __P((struct tulip_cardbus_softc *,
const u_int8_t *, const struct tlp_cardbus_quirks *));
const struct tulip_cardbus_product *
tlp_cardbus_lookup(ca)
const struct cardbus_attach_args *ca;
{
const struct tulip_cardbus_product *tcp;
for (tcp = tlp_cardbus_products;
tlp_chip_names[tcp->tcp_chip] != NULL;
tcp++) {
if (PCI_VENDOR(ca->ca_id) == tcp->tcp_vendor &&
PCI_PRODUCT(ca->ca_id) == tcp->tcp_product)
return (tcp);
}
return (NULL);
}
void
tlp_cardbus_get_quirks(csc, enaddr, tpq)
struct tulip_cardbus_softc *csc;
const u_int8_t *enaddr;
const struct tlp_cardbus_quirks *tpq;
{
for (; tpq->tpq_func != NULL; tpq++) {
if (tpq->tpq_oui[0] == enaddr[0] &&
tpq->tpq_oui[1] == enaddr[1] &&
tpq->tpq_oui[2] == enaddr[2]) {
(*tpq->tpq_func)(csc, enaddr);
return;
}
}
}
int
tlp_cardbus_match(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct cardbus_attach_args *ca = aux;
if (tlp_cardbus_lookup(ca) != NULL)
return (1);
return (0);
}
void
tlp_cardbus_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct tulip_cardbus_softc *csc = (void *)self;
struct tulip_softc *sc = &csc->sc_tulip;
struct cardbus_attach_args *ca = aux;
cardbus_devfunc_t ct = ca->ca_ct;
const struct tulip_cardbus_product *tcp;
u_int8_t enaddr[ETHER_ADDR_LEN];
bus_addr_t adr;
pcireg_t reg;
sc->sc_devno = ca->ca_device;
sc->sc_dmat = ca->ca_dmat;
csc->sc_ct = ct;
csc->sc_tag = ca->ca_tag;
tcp = tlp_cardbus_lookup(ca);
if (tcp == NULL) {
printf("\n");
panic("tlp_cardbus_attach: impossible");
}
sc->sc_chip = tcp->tcp_chip;
/*
* By default, Tulip registers are 8 bytes long (4 bytes
* followed by a 4 byte pad).
*/
sc->sc_regshift = 3;
/*
* Power management hooks.
*/
sc->sc_enable = tlp_cardbus_enable;
sc->sc_disable = tlp_cardbus_disable;
sc->sc_power = tlp_cardbus_power;
/*
* Get revision info, and set some chip-specific variables.
*/
sc->sc_rev = PCI_REVISION(ca->ca_class);
switch (sc->sc_chip) {
case TULIP_CHIP_21142:
if (sc->sc_rev >= 0x20)
sc->sc_chip = TULIP_CHIP_21143;
break;
case TULIP_CHIP_AN985:
/*
* The AN983 and AN985 are very similar, and are
* differentiated by a "signature" register that
* is like, but not identical, to a PCI ID register.
*/
reg = cardbus_conf_read(ct->ct_cc, ct->ct_cf, csc->sc_tag,
0x80);
switch (reg) {
case 0x09811317:
sc->sc_chip = TULIP_CHIP_AN985;
break;
case 0x09851317:
sc->sc_chip = TULIP_CHIP_AN983;
break;
}
break;
default:
/* Nothing. -- to make gcc happy */
break;
}
printf(": %s Ethernet, pass %d.%d\n",
tlp_chip_names[sc->sc_chip],
(sc->sc_rev >> 4) & 0xf, sc->sc_rev & 0xf);
/*
* Map the device.
*/
csc->sc_csr = CARDBUS_COMMAND_MASTER_ENABLE;
if (Cardbus_mapreg_map(ct, TULIP_PCI_MMBA,
CARDBUS_MAPREG_TYPE_MEM, 0, &sc->sc_st, &sc->sc_sh, &adr,
&csc->sc_mapsize) == 0) {
#if rbus
#else
(*ct->ct_cf->cardbus_mem_open)(cc, 0, adr, adr+csc->sc_mapsize);
#endif
csc->sc_cben = CARDBUS_MEM_ENABLE;
csc->sc_csr |= CARDBUS_COMMAND_MEM_ENABLE;
csc->sc_bar_reg = TULIP_PCI_MMBA;
csc->sc_bar_val = adr | CARDBUS_MAPREG_TYPE_MEM;
} else if (Cardbus_mapreg_map(ct, TULIP_PCI_IOBA,
CARDBUS_MAPREG_TYPE_IO, 0, &sc->sc_st, &sc->sc_sh, &adr,
&csc->sc_mapsize) == 0) {
#if rbus
#else
(*ct->ct_cf->cardbus_io_open)(cc, 0, adr, adr+csc->sc_mapsize);
#endif
csc->sc_cben = CARDBUS_IO_ENABLE;
csc->sc_csr |= CARDBUS_COMMAND_IO_ENABLE;
csc->sc_bar_reg = TULIP_PCI_IOBA;
csc->sc_bar_val = adr | CARDBUS_MAPREG_TYPE_IO;
} else {
printf("%s: unable to map device registers\n",
sc->sc_dev.dv_xname);
return;
}
/*
* Bring the chip out of powersave mode and initialize the
* configuration registers.
*/
tlp_cardbus_setup(csc);
/*
* Read the contents of the Ethernet Address ROM/SROM.
*/
switch (sc->sc_chip) {
case TULIP_CHIP_X3201_3:
/*
* No SROM on this chip.
*/
break;
default:
if (tlp_read_srom(sc) == 0)
goto cant_cope;
break;
}
/*
* Deal with chip/board quirks. This includes setting up
* the mediasw, and extracting the Ethernet address from
* the rombuf.
*/
switch (sc->sc_chip) {
case TULIP_CHIP_21142:
case TULIP_CHIP_21143:
/* Check for new format SROM. */
if (tlp_isv_srom_enaddr(sc, enaddr) != 0) {
/*
* We start out with the 2114x ISV media switch.
* When we search for quirks, we may change to
* a different switch.
*/
sc->sc_mediasw = &tlp_2114x_isv_mediasw;
} else if (tlp_parse_old_srom(sc, enaddr) == 0) {
/*
* Not an ISV SROM, and not in old DEC Address
* ROM format. Try to snarf it out of the CIS.
*/
if (ca->ca_cis.funce.network.netid_present == 0)
goto cant_cope;
/* Grab the MAC address from the CIS. */
memcpy(enaddr, ca->ca_cis.funce.network.netid,
sizeof(enaddr));
}
/*
* Deal with any quirks this board might have.
*/
tlp_cardbus_get_quirks(csc, enaddr, tlp_cardbus_21142_quirks);
/*
* If we don't already have a media switch, default to
* MII-over-SIO, with no special reset routine.
*/
if (sc->sc_mediasw == NULL) {
printf("%s: defaulting to MII-over-SIO; no bets...\n",
sc->sc_dev.dv_xname);
sc->sc_mediasw = &tlp_sio_mii_mediasw;
}
break;
case TULIP_CHIP_AN983:
case TULIP_CHIP_AN985:
/*
* The ADMtek AN985's Ethernet address is located
* at offset 8 of its EEPROM.
*/
memcpy(enaddr, &sc->sc_srom[8], ETHER_ADDR_LEN);
/*
* The ADMtek AN985 can be configured in Single-Chip
* mode or MAC-only mode. Single-Chip uses the built-in
* PHY, MAC-only has an external PHY (usually HomePNA).
* The selection is based on an EEPROM setting, and both
* PHYs are access via MII attached to SIO.
*
* The AN985 "ghosts" the internal PHY onto all
* MII addresses, so we have to use a media init
* routine that limits the search.
* XXX How does this work with MAC-only mode?
*/
sc->sc_mediasw = &tlp_an985_mediasw;
break;
case TULIP_CHIP_X3201_3:
/*
* The X3201 doesn't have an SROM. Lift the MAC address
* from the CIS. Also, we have a special media switch:
* MII-on-SIO, plus some special GPIO setup.
*/
memcpy(enaddr, ca->ca_cis.funce.network.netid, sizeof(enaddr));
sc->sc_reset = tlp_cardbus_x3201_reset;
sc->sc_mediasw = &tlp_sio_mii_mediasw;
break;
default:
cant_cope:
printf("%s: sorry, unable to handle your board\n",
sc->sc_dev.dv_xname);
return;
}
/* Remember which interrupt line. */
csc->sc_intrline = ca->ca_intrline;
/*
* The CardBus cards will make it to store-and-forward mode as
* soon as you put them under any kind of load, so just start
* out there.
*/
sc->sc_txthresh = TXTH_SF;
/*
* Finish off the attach.
*/
tlp_attach(sc, enaddr);
/*
* Power down the socket.
*/
Cardbus_function_disable(csc->sc_ct);
}
int
tlp_cardbus_detach(self, flags)
struct device *self;
int flags;
{
struct tulip_cardbus_softc *csc = (void *)self;
struct tulip_softc *sc = &csc->sc_tulip;
struct cardbus_devfunc *ct = csc->sc_ct;
int rv;
#if defined(DIAGNOSTIC)
if (ct == NULL)
panic("%s: data structure lacks", sc->sc_dev.dv_xname);
#endif
rv = tlp_detach(sc);
if (rv)
return (rv);
/*
* Unhook the interrupt handler.
*/
if (csc->sc_ih != NULL)
cardbus_intr_disestablish(ct->ct_cc, ct->ct_cf, csc->sc_ih);
/*
* Release bus space and close window.
*/
if (csc->sc_bar_reg != 0)
Cardbus_mapreg_unmap(ct, csc->sc_bar_reg,
sc->sc_st, sc->sc_sh, csc->sc_mapsize);
return (0);
}
int
tlp_cardbus_enable(sc)
struct tulip_softc *sc;
{
struct tulip_cardbus_softc *csc = (void *) sc;
cardbus_devfunc_t ct = csc->sc_ct;
cardbus_chipset_tag_t cc = ct->ct_cc;
cardbus_function_tag_t cf = ct->ct_cf;
/*
* Power on the socket.
*/
Cardbus_function_enable(ct);
/*
* Set up the PCI configuration registers.
*/
tlp_cardbus_setup(csc);
/*
* Map and establish the interrupt.
*/
csc->sc_ih = cardbus_intr_establish(cc, cf, csc->sc_intrline, IPL_NET,
tlp_intr, sc);
if (csc->sc_ih == NULL) {
printf("%s: unable to establish interrupt at %d\n",
sc->sc_dev.dv_xname, csc->sc_intrline);
Cardbus_function_disable(csc->sc_ct);
return (1);
}
printf("%s: interrupting at %d\n", sc->sc_dev.dv_xname,
csc->sc_intrline);
return (0);
}
void
tlp_cardbus_disable(sc)
struct tulip_softc *sc;
{
struct tulip_cardbus_softc *csc = (void *) sc;
cardbus_devfunc_t ct = csc->sc_ct;
cardbus_chipset_tag_t cc = ct->ct_cc;
cardbus_function_tag_t cf = ct->ct_cf;
/* Unhook the interrupt handler. */
cardbus_intr_disestablish(cc, cf, csc->sc_ih);
csc->sc_ih = NULL;
/* Power down the socket. */
Cardbus_function_disable(ct);
}
void
tlp_cardbus_power(sc, why)
struct tulip_softc *sc;
int why;
{
struct tulip_cardbus_softc *csc = (void *) sc;
if (why == PWR_RESUME) {
/*
* Give the PCI configuration registers a kick
* in the head.
*/
#ifdef DIAGNOSTIC
if (TULIP_IS_ENABLED(sc) == 0)
panic("tlp_cardbus_power");
#endif
tlp_cardbus_setup(csc);
}
}
void
tlp_cardbus_setup(csc)
struct tulip_cardbus_softc *csc;
{
struct tulip_softc *sc = &csc->sc_tulip;
cardbus_devfunc_t ct = csc->sc_ct;
cardbus_chipset_tag_t cc = ct->ct_cc;
cardbus_function_tag_t cf = ct->ct_cf;
pcireg_t reg;
/*
* Check to see if the device is in power-save mode, and
* bring it out if necessary.
*/
switch (sc->sc_chip) {
case TULIP_CHIP_21142:
case TULIP_CHIP_21143:
case TULIP_CHIP_X3201_3:
/*
* Clear the "sleep mode" bit in the CFDA register.
*/
reg = cardbus_conf_read(cc, cf, csc->sc_tag, TULIP_PCI_CFDA);
if (reg & (CFDA_SLEEP|CFDA_SNOOZE))
cardbus_conf_write(cc, cf, csc->sc_tag, TULIP_PCI_CFDA,
reg & ~(CFDA_SLEEP|CFDA_SNOOZE));
break;
default:
/* Nothing. -- to make gcc happy */
break;
}
(void)cardbus_setpowerstate(sc->sc_dev.dv_xname, ct, csc->sc_tag,
PCI_PWR_D0);
/* Make sure the right access type is on the CardBus bridge. */
(*ct->ct_cf->cardbus_ctrl)(cc, csc->sc_cben);
(*ct->ct_cf->cardbus_ctrl)(cc, CARDBUS_BM_ENABLE);
/* Program the BAR. */
cardbus_conf_write(cc, cf, csc->sc_tag, csc->sc_bar_reg,
csc->sc_bar_val);
/* Enable the appropriate bits in the PCI CSR. */
reg = cardbus_conf_read(cc, cf, csc->sc_tag, PCI_COMMAND_STATUS_REG);
reg &= ~(PCI_COMMAND_IO_ENABLE|PCI_COMMAND_MEM_ENABLE);
reg |= csc->sc_csr;
cardbus_conf_write(cc, cf, csc->sc_tag, PCI_COMMAND_STATUS_REG, reg);
/*
* Make sure the latency timer is set to some reasonable
* value.
*/
reg = cardbus_conf_read(cc, cf, csc->sc_tag, PCI_BHLC_REG);
if (PCI_LATTIMER(reg) < 0x20) {
reg &= ~(PCI_LATTIMER_MASK << PCI_LATTIMER_SHIFT);
reg |= (0x20 << PCI_LATTIMER_SHIFT);
cardbus_conf_write(cc, cf, csc->sc_tag, PCI_BHLC_REG, reg);
}
}
void
tlp_cardbus_x3201_reset(sc)
struct tulip_softc *sc;
{
u_int32_t reg;
reg = TULIP_READ(sc, CSR_SIAGEN);
/* make GP[2,0] outputs */
TULIP_WRITE(sc, CSR_SIAGEN, (reg & ~SIAGEN_MD) | SIAGEN_CWE |
0x00050000);
TULIP_WRITE(sc, CSR_SIAGEN, (reg & ~SIAGEN_CWE) | SIAGEN_MD);
}
void
tlp_cardbus_lxt_quirks(csc, enaddr)
struct tulip_cardbus_softc *csc;
const u_int8_t *enaddr;
{
struct tulip_softc *sc = &csc->sc_tulip;
sc->sc_mediasw = &tlp_sio_mii_mediasw;
}
Reference in New Issue View Git Blame Copy Permalink