10fe49d72c
#if NBPFILTER is no longer required in the client. This change doesn't yet add support for loading bpf as a module, since drivers can register before bpf is attached. However, callers of bpf can now be modularized. Dynamically loadable bpf could probably be done fairly easily with coordination from the stub driver and the real driver by registering attachments in the stub before the real driver is loaded and doing a handoff. ... and I'm not going to ponder the depths of unload here. Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
1568 lines
36 KiB
C
1568 lines
36 KiB
C
/* $NetBSD: if_iy.c,v 1.87 2010/01/19 22:06:59 pooka Exp $ */
|
|
/* #define IYDEBUG */
|
|
/* #define IYMEMDEBUG */
|
|
|
|
/*-
|
|
* Copyright (c) 1996,2001 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Ignatios Souvatzis.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Supported hardware:
|
|
*
|
|
* - Intel EtherExpress Pro/10.
|
|
* - possibly other boards using the i82595 chip and no special tweaks.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: if_iy.c,v 1.87 2010/01/19 22:06:59 pooka Exp $");
|
|
|
|
#include "opt_inet.h"
|
|
#include "rnd.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/protosw.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/device.h>
|
|
#include <sys/endian.h>
|
|
#if NRND > 0
|
|
#include <sys/rnd.h>
|
|
#endif
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_dl.h>
|
|
|
|
#include <net/if_ether.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/bpfdesc.h>
|
|
|
|
#ifdef INET
|
|
#include <netinet/in.h>
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in_var.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/if_inarp.h>
|
|
#endif
|
|
|
|
|
|
#if defined(SIOCSIFMEDIA)
|
|
#include <net/if_media.h>
|
|
#endif
|
|
|
|
#include <sys/cpu.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/intr.h>
|
|
|
|
#include <dev/isa/isareg.h>
|
|
#include <dev/isa/isavar.h>
|
|
#include <dev/ic/i82595reg.h>
|
|
|
|
/* XXX why isn't this centralized? */
|
|
#ifndef __BUS_SPACE_HAS_STREAM_METHODS
|
|
#define bus_space_write_stream_2 bus_space_write_2
|
|
#define bus_space_write_multi_stream_2 bus_space_write_multi_2
|
|
#define bus_space_read_stream_2 bus_space_read_2
|
|
#define bus_space_read_multi_stream_2 bus_space_read_multi_2
|
|
#endif /* __BUS_SPACE_HAS_STREAM_METHODS */
|
|
|
|
/*
|
|
* Ethernet status, per interface.
|
|
*/
|
|
struct iy_softc {
|
|
struct device sc_dev;
|
|
void *sc_ih;
|
|
|
|
bus_space_tag_t sc_iot;
|
|
bus_space_handle_t sc_ioh;
|
|
|
|
struct ethercom sc_ethercom;
|
|
|
|
struct ifmedia iy_ifmedia;
|
|
int iy_media;
|
|
|
|
int mappedirq;
|
|
|
|
int hard_vers;
|
|
|
|
int promisc;
|
|
|
|
int sram, tx_size, rx_size;
|
|
|
|
int tx_start, tx_end, tx_last;
|
|
int rx_start;
|
|
|
|
int doing_mc_setup;
|
|
#ifdef IYDEBUG
|
|
int sc_debug;
|
|
#endif
|
|
|
|
#if NRND > 0
|
|
rndsource_element_t rnd_source;
|
|
#endif
|
|
};
|
|
|
|
void iywatchdog(struct ifnet *);
|
|
int iyioctl(struct ifnet *, u_long, void *);
|
|
int iyintr(void *);
|
|
void iyinit(struct iy_softc *);
|
|
void iystop(struct iy_softc *);
|
|
void iystart(struct ifnet *);
|
|
|
|
void iy_intr_rx(struct iy_softc *);
|
|
void iy_intr_tx(struct iy_softc *);
|
|
|
|
void iyreset(struct iy_softc *);
|
|
void iy_readframe(struct iy_softc *, int);
|
|
void iy_drop_packet_buffer(struct iy_softc *);
|
|
void iy_find_mem_size(struct iy_softc *);
|
|
void iyrint(struct iy_softc *);
|
|
void iytint(struct iy_softc *);
|
|
void iyxmit(struct iy_softc *);
|
|
static void iy_mc_setup(struct iy_softc *);
|
|
static void iy_mc_reset(struct iy_softc *);
|
|
void iyget(struct iy_softc *, bus_space_tag_t, bus_space_handle_t, int);
|
|
void iyprobemem(struct iy_softc *);
|
|
static inline void eepromwritebit(bus_space_tag_t, bus_space_handle_t, int);
|
|
static inline int eepromreadbit(bus_space_tag_t, bus_space_handle_t);
|
|
|
|
#ifdef IYDEBUGX
|
|
void print_rbd(volatile struct iy_recv_buf_desc *);
|
|
|
|
int in_ifrint = 0;
|
|
int in_iftint = 0;
|
|
#endif
|
|
|
|
int iy_mediachange(struct ifnet *);
|
|
void iy_mediastatus(struct ifnet *, struct ifmediareq *);
|
|
|
|
int iyprobe(device_t, cfdata_t, void *);
|
|
void iyattach(device_t, device_t, void *);
|
|
|
|
static u_int16_t eepromread(bus_space_tag_t, bus_space_handle_t, int);
|
|
|
|
static int eepromreadall(bus_space_tag_t, bus_space_handle_t, u_int16_t *,
|
|
int);
|
|
|
|
CFATTACH_DECL(iy, sizeof(struct iy_softc),
|
|
iyprobe, iyattach, NULL, NULL);
|
|
|
|
static u_int8_t eepro_irqmap[] = EEPP_INTMAP;
|
|
static u_int8_t eepro_revirqmap[] = EEPP_RINTMAP;
|
|
|
|
int
|
|
iyprobe(device_t parent, cfdata_t match, void *aux)
|
|
{
|
|
struct isa_attach_args *ia = aux;
|
|
u_int16_t eaddr[8];
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
u_int8_t c, d;
|
|
int irq;
|
|
|
|
if (ia->ia_nio < 1)
|
|
return (0);
|
|
if (ia->ia_nirq < 1)
|
|
return (0);
|
|
|
|
if (ISA_DIRECT_CONFIG(ia))
|
|
return (0);
|
|
|
|
iot = ia->ia_iot;
|
|
|
|
if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT)
|
|
return 0;
|
|
|
|
if (bus_space_map(iot, ia->ia_io[0].ir_addr, 16, 0, &ioh))
|
|
return 0;
|
|
|
|
/* try to find the round robin sig: */
|
|
|
|
c = bus_space_read_1(iot, ioh, ID_REG);
|
|
if ((c & ID_REG_MASK) != ID_REG_SIG)
|
|
goto out;
|
|
|
|
d = bus_space_read_1(iot, ioh, ID_REG);
|
|
if ((d & ID_REG_MASK) != ID_REG_SIG)
|
|
goto out;
|
|
|
|
if (((d-c) & R_ROBIN_BITS) != 0x40)
|
|
goto out;
|
|
|
|
d = bus_space_read_1(iot, ioh, ID_REG);
|
|
if ((d & ID_REG_MASK) != ID_REG_SIG)
|
|
goto out;
|
|
|
|
if (((d-c) & R_ROBIN_BITS) != 0x80)
|
|
goto out;
|
|
|
|
d = bus_space_read_1(iot, ioh, ID_REG);
|
|
if ((d & ID_REG_MASK) != ID_REG_SIG)
|
|
goto out;
|
|
|
|
if (((d-c) & R_ROBIN_BITS) != 0xC0)
|
|
goto out;
|
|
|
|
d = bus_space_read_1(iot, ioh, ID_REG);
|
|
if ((d & ID_REG_MASK) != ID_REG_SIG)
|
|
goto out;
|
|
|
|
if (((d-c) & R_ROBIN_BITS) != 0x00)
|
|
goto out;
|
|
|
|
#ifdef IYDEBUG
|
|
printf("iyprobe verified working ID reg.\n");
|
|
#endif
|
|
|
|
if (eepromreadall(iot, ioh, eaddr, 8))
|
|
goto out;
|
|
|
|
if (ia->ia_irq[0].ir_irq == ISA_UNKNOWN_IRQ)
|
|
irq = eepro_irqmap[eaddr[EEPPW1] & EEPP_Int];
|
|
else
|
|
irq = ia->ia_irq[0].ir_irq;
|
|
|
|
if (irq >= sizeof(eepro_revirqmap))
|
|
goto out;
|
|
|
|
if (eepro_revirqmap[irq] == 0xff)
|
|
goto out;
|
|
|
|
/* now lets reset the chip */
|
|
|
|
bus_space_write_1(iot, ioh, COMMAND_REG, RESET_CMD);
|
|
delay(200);
|
|
|
|
ia->ia_nio = 1;
|
|
ia->ia_io[0].ir_size = 16;
|
|
|
|
ia->ia_nirq = 1;
|
|
ia->ia_irq[0].ir_irq = irq;
|
|
|
|
ia->ia_niomem = 0;
|
|
ia->ia_ndrq = 0;
|
|
|
|
bus_space_unmap(iot, ioh, 16);
|
|
return 1; /* found */
|
|
out:
|
|
bus_space_unmap(iot, ioh, 16);
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
iyattach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct iy_softc *sc = (void *)self;
|
|
struct isa_attach_args *ia = aux;
|
|
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
unsigned temp;
|
|
u_int16_t eaddr[8];
|
|
u_int8_t myaddr[ETHER_ADDR_LEN];
|
|
int eirq;
|
|
|
|
iot = ia->ia_iot;
|
|
|
|
if (bus_space_map(iot, ia->ia_io[0].ir_addr, 16, 0, &ioh)) {
|
|
printf(": can't map i/o space\n");
|
|
return;
|
|
}
|
|
|
|
sc->sc_iot = iot;
|
|
sc->sc_ioh = ioh;
|
|
|
|
sc->mappedirq = eepro_revirqmap[ia->ia_irq[0].ir_irq];
|
|
|
|
/* now let's reset the chip */
|
|
|
|
bus_space_write_1(iot, ioh, COMMAND_REG, RESET_CMD);
|
|
delay(200);
|
|
|
|
iyprobemem(sc);
|
|
|
|
strlcpy(ifp->if_xname, device_xname(&sc->sc_dev), IFNAMSIZ);
|
|
ifp->if_softc = sc;
|
|
ifp->if_start = iystart;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS
|
|
| IFF_MULTICAST;
|
|
|
|
sc->doing_mc_setup = 0;
|
|
|
|
ifp->if_ioctl = iyioctl;
|
|
ifp->if_watchdog = iywatchdog;
|
|
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
(void)eepromreadall(iot, ioh, eaddr, 8);
|
|
sc->hard_vers = eaddr[EEPW6] & EEPP_BoardRev;
|
|
|
|
#ifdef DIAGNOSTICS
|
|
if ((eaddr[EEPPEther0] !=
|
|
eepromread(iot, ioh, EEPPEther0a)) &&
|
|
(eaddr[EEPPEther1] !=
|
|
eepromread(iot, ioh, EEPPEther1a)) &&
|
|
(eaddr[EEPPEther2] !=
|
|
eepromread(iot, ioh, EEPPEther2a)))
|
|
|
|
printf("EEPROM Ethernet address differs from copy\n");
|
|
#endif
|
|
|
|
myaddr[1] = eaddr[EEPPEther0] & 0xFF;
|
|
myaddr[0] = eaddr[EEPPEther0] >> 8;
|
|
myaddr[3] = eaddr[EEPPEther1] & 0xFF;
|
|
myaddr[2] = eaddr[EEPPEther1] >> 8;
|
|
myaddr[5] = eaddr[EEPPEther2] & 0xFF;
|
|
myaddr[4] = eaddr[EEPPEther2] >> 8;
|
|
|
|
ifmedia_init(&sc->iy_ifmedia, 0, iy_mediachange, iy_mediastatus);
|
|
ifmedia_add(&sc->iy_ifmedia, IFM_ETHER | IFM_10_2, 0, NULL);
|
|
ifmedia_add(&sc->iy_ifmedia, IFM_ETHER | IFM_10_5, 0, NULL);
|
|
ifmedia_add(&sc->iy_ifmedia, IFM_ETHER | IFM_10_T, 0, NULL);
|
|
ifmedia_add(&sc->iy_ifmedia, IFM_ETHER | IFM_AUTO, 0, NULL);
|
|
ifmedia_set(&sc->iy_ifmedia, IFM_ETHER | IFM_AUTO);
|
|
/* Attach the interface. */
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp, myaddr);
|
|
printf(": address %s, rev. %d, %d kB\n",
|
|
ether_sprintf(myaddr),
|
|
sc->hard_vers, sc->sram/1024);
|
|
|
|
eirq = eepro_irqmap[eaddr[EEPPW1] & EEPP_Int];
|
|
if (eirq != ia->ia_irq[0].ir_irq)
|
|
printf("%s: EEPROM irq setting %d ignored\n",
|
|
device_xname(&sc->sc_dev), eirq);
|
|
|
|
sc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq[0].ir_irq,
|
|
IST_EDGE, IPL_NET, iyintr, sc);
|
|
|
|
#if NRND > 0
|
|
rnd_attach_source(&sc->rnd_source, device_xname(&sc->sc_dev),
|
|
RND_TYPE_NET, 0);
|
|
#endif
|
|
|
|
temp = bus_space_read_1(iot, ioh, INT_NO_REG);
|
|
bus_space_write_1(iot, ioh, INT_NO_REG, (temp & 0xf8) | sc->mappedirq);
|
|
}
|
|
|
|
void
|
|
iystop(struct iy_softc *sc)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
#ifdef IYDEBUG
|
|
u_int p, v;
|
|
#endif
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
|
|
bus_space_write_1(iot, ioh, COMMAND_REG, RCV_DISABLE_CMD);
|
|
|
|
bus_space_write_1(iot, ioh, INT_MASK_REG, ALL_INTS);
|
|
bus_space_write_1(iot, ioh, STATUS_REG, ALL_INTS);
|
|
|
|
bus_space_write_1(iot, ioh, COMMAND_REG, RESET_CMD);
|
|
delay(200);
|
|
#ifdef IYDEBUG
|
|
printf("%s: dumping tx chain (st 0x%x end 0x%x last 0x%x)\n",
|
|
device_xname(&sc->sc_dev), sc->tx_start, sc->tx_end, sc->tx_last);
|
|
p = sc->tx_last;
|
|
if (!p)
|
|
p = sc->tx_start;
|
|
do {
|
|
char sbuf[128];
|
|
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, p);
|
|
|
|
v = le16toh(bus_space_read_stream_2(iot, ioh, MEM_PORT_REG));
|
|
snprintb(sbuf, sizeof(sbuf), "\020\006Ab\010Dn", v);
|
|
printf("0x%04x: %s ", p, sbuf);
|
|
|
|
v = le16toh(bus_space_read_stream_2(iot, ioh, MEM_PORT_REG));
|
|
snprintb(sbuf, sizeof(sbuf),
|
|
"\020\6MAX_COL\7HRT_BEAT\010TX_DEF\011UND_RUN"
|
|
"\012JERR\013LST_CRS\014LTCOL\016TX_OK\020COLL", v);
|
|
printf("0x%s", sbuf);
|
|
|
|
p = le16toh(bus_space_read_stream_2(iot, ioh, MEM_PORT_REG));
|
|
printf(" 0x%04x", p);
|
|
|
|
v = le16toh(bus_space_read_stream_2(iot, ioh, MEM_PORT_REG));
|
|
snprintb(sbuf, sizeof(sbuf), "\020\020Ch", v);
|
|
printf(" 0x%s\n", sbuf);
|
|
|
|
} while (v & 0x8000);
|
|
#endif
|
|
sc->tx_start = sc->tx_end = sc->rx_size;
|
|
sc->tx_last = 0;
|
|
sc->sc_ethercom.ec_if.if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);
|
|
}
|
|
|
|
void
|
|
iyreset(struct iy_softc *sc)
|
|
{
|
|
int s;
|
|
s = splnet();
|
|
iystop(sc);
|
|
iyinit(sc);
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
iyinit(struct iy_softc *sc)
|
|
{
|
|
int i;
|
|
unsigned temp;
|
|
struct ifnet *ifp;
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
|
|
ifp = &sc->sc_ethercom.ec_if;
|
|
#ifdef IYDEBUG
|
|
printf("ifp is %p\n", ifp);
|
|
#endif
|
|
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(2));
|
|
|
|
temp = bus_space_read_1(iot, ioh, EEPROM_REG);
|
|
if (temp & 0x10)
|
|
bus_space_write_1(iot, ioh, EEPROM_REG, temp & ~0x10);
|
|
|
|
for (i=0; i<6; ++i) {
|
|
bus_space_write_1(iot, ioh, I_ADD(i), CLLADDR(ifp->if_sadl)[i]);
|
|
}
|
|
|
|
temp = bus_space_read_1(iot, ioh, REG1);
|
|
bus_space_write_1(iot, ioh, REG1,
|
|
temp | /* XMT_CHAIN_INT | XMT_CHAIN_ERRSTOP | */ RCV_DISCARD_BAD);
|
|
|
|
if (ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI)) {
|
|
temp = MATCH_ALL;
|
|
} else
|
|
temp = MATCH_BRDCST;
|
|
|
|
bus_space_write_1(iot, ioh, RECV_MODES_REG, temp);
|
|
|
|
#ifdef IYDEBUG
|
|
{
|
|
char sbuf[128];
|
|
|
|
snprintb(sbuf, sizeof(sbuf),
|
|
"\020\1PRMSC\2NOBRDST\3SEECRC\4LENGTH\5NOSaIns\6MultiIA",
|
|
temp);
|
|
|
|
printf("%s: RECV_MODES set to %s\n", device_xname(&sc->sc_dev), sbuf);
|
|
}
|
|
#endif
|
|
/* XXX VOODOO */
|
|
temp = bus_space_read_1(iot, ioh, MEDIA_SELECT);
|
|
bus_space_write_1(iot, ioh, MEDIA_SELECT, temp);
|
|
/* XXX END OF VOODOO */
|
|
|
|
|
|
delay(500000); /* for the hardware to test for the connector */
|
|
|
|
temp = bus_space_read_1(iot, ioh, MEDIA_SELECT);
|
|
#ifdef IYDEBUG
|
|
{
|
|
char sbuf[128];
|
|
|
|
snprintb(sbuf, sizeof(sbuf),
|
|
"\020\1LnkInDis\2PolCor\3TPE\4JabberDis\5NoAport\6BNC",
|
|
temp);
|
|
printf("%s: media select was 0x%s ", device_xname(&sc->sc_dev), sbuf);
|
|
}
|
|
#endif
|
|
temp = (temp & TEST_MODE_MASK);
|
|
|
|
switch(IFM_SUBTYPE(sc->iy_ifmedia.ifm_media)) {
|
|
case IFM_10_5:
|
|
temp &= ~ (BNC_BIT | TPE_BIT);
|
|
break;
|
|
|
|
case IFM_10_2:
|
|
temp = (temp & ~TPE_BIT) | BNC_BIT;
|
|
break;
|
|
|
|
case IFM_10_T:
|
|
temp = (temp & ~BNC_BIT) | TPE_BIT;
|
|
break;
|
|
default:
|
|
;
|
|
/* nothing; leave as it is */
|
|
}
|
|
switch (temp & (BNC_BIT | TPE_BIT)) {
|
|
case BNC_BIT:
|
|
sc->iy_media = IFM_ETHER | IFM_10_2;
|
|
break;
|
|
case TPE_BIT:
|
|
sc->iy_media = IFM_ETHER | IFM_10_T;
|
|
break;
|
|
default:
|
|
sc->iy_media = IFM_ETHER | IFM_10_5;
|
|
}
|
|
|
|
bus_space_write_1(iot, ioh, MEDIA_SELECT, temp);
|
|
#ifdef IYDEBUG
|
|
{
|
|
char sbuf[128];
|
|
|
|
snprintb(sbuf, sizeof(sbuf),
|
|
"\020\1LnkInDis\2PolCor\3TPE\4JabberDis\5NoAport\6BNC",
|
|
temp);
|
|
printf("changed to 0x%s\n", sbuf);
|
|
}
|
|
#endif
|
|
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(0));
|
|
bus_space_write_1(iot, ioh, INT_MASK_REG, ALL_INTS);
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(1));
|
|
|
|
temp = bus_space_read_1(iot, ioh, INT_NO_REG);
|
|
bus_space_write_1(iot, ioh, INT_NO_REG, (temp & 0xf8) | sc->mappedirq);
|
|
|
|
#ifdef IYDEBUG
|
|
{
|
|
char sbuf[128];
|
|
|
|
snprintb(sbuf, sizeof(sbuf),
|
|
"\020\4bad_irq\010flash/boot present", temp);
|
|
|
|
printf("%s: int no was %s\n", device_xname(&sc->sc_dev), sbuf);
|
|
|
|
temp = bus_space_read_1(iot, ioh, INT_NO_REG);
|
|
snprintb(sbuf, sizeof(sbuf),
|
|
"\020\4bad_irq\010flash/boot present", temp);
|
|
printf("%s: int no now %s\n", device_xname(&sc->sc_dev), sbuf);
|
|
}
|
|
#endif
|
|
|
|
bus_space_write_1(iot, ioh, RCV_LOWER_LIMIT_REG, 0);
|
|
bus_space_write_1(iot, ioh, RCV_UPPER_LIMIT_REG, (sc->rx_size -2) >>8);
|
|
bus_space_write_1(iot, ioh, XMT_LOWER_LIMIT_REG, sc->rx_size >>8);
|
|
bus_space_write_1(iot, ioh, XMT_UPPER_LIMIT_REG, (sc->sram - 2) >>8);
|
|
|
|
temp = bus_space_read_1(iot, ioh, REG1);
|
|
#ifdef IYDEBUG
|
|
{
|
|
char sbuf[128];
|
|
|
|
snprintb(sbuf, sizeof(sbuf), "\020\2WORD_WIDTH\010INT_ENABLE",
|
|
temp);
|
|
|
|
printf("%s: HW access is %s\n", device_xname(&sc->sc_dev), sbuf);
|
|
}
|
|
#endif
|
|
bus_space_write_1(iot, ioh, REG1, temp | INT_ENABLE); /* XXX what about WORD_WIDTH? */
|
|
|
|
#ifdef IYDEBUG
|
|
{
|
|
char sbuf[128];
|
|
|
|
temp = bus_space_read_1(iot, ioh, REG1);
|
|
snprintb(sbuf, sizeof(sbuf), "\020\2WORD_WIDTH\010INT_ENABLE",
|
|
temp);
|
|
printf("%s: HW access is %s\n", device_xname(&sc->sc_dev), sbuf);
|
|
}
|
|
#endif
|
|
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(0));
|
|
|
|
bus_space_write_1(iot, ioh, INT_MASK_REG, ALL_INTS & ~(RX_BIT|TX_BIT));
|
|
bus_space_write_1(iot, ioh, STATUS_REG, ALL_INTS); /* clear ints */
|
|
|
|
bus_space_write_1(iot, ioh, RCV_COPY_THRESHOLD, 0);
|
|
|
|
bus_space_write_2(iot, ioh, RCV_START_LOW, 0);
|
|
bus_space_write_2(iot, ioh, RCV_STOP_LOW, sc->rx_size - 2);
|
|
sc->rx_start = 0;
|
|
|
|
bus_space_write_1(iot, ioh, 0, SEL_RESET_CMD);
|
|
delay(200);
|
|
|
|
bus_space_write_2(iot, ioh, XMT_ADDR_REG, sc->rx_size);
|
|
|
|
sc->tx_start = sc->tx_end = sc->rx_size;
|
|
sc->tx_last = 0;
|
|
|
|
bus_space_write_1(iot, ioh, 0, RCV_ENABLE_CMD);
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
}
|
|
|
|
void
|
|
iystart(struct ifnet *ifp)
|
|
{
|
|
struct iy_softc *sc;
|
|
|
|
|
|
struct mbuf *m0, *m;
|
|
u_int len, pad, last, end;
|
|
u_int llen, residual;
|
|
int avail;
|
|
char *data;
|
|
unsigned temp;
|
|
u_int16_t resval, stat;
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
|
|
#ifdef IYDEBUG
|
|
printf("iystart called\n");
|
|
#endif
|
|
sc = ifp->if_softc;
|
|
|
|
if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
|
|
return;
|
|
|
|
iy_intr_tx(sc);
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
|
|
for (;;) {
|
|
IFQ_POLL(&ifp->if_snd, m0);
|
|
if (m0 == NULL)
|
|
break;
|
|
#ifdef IYDEBUG
|
|
printf("%s: trying to write another packet to the hardware\n",
|
|
device_xname(&sc->sc_dev));
|
|
#endif
|
|
|
|
/* We need to use m->m_pkthdr.len, so require the header */
|
|
if ((m0->m_flags & M_PKTHDR) == 0)
|
|
panic("iystart: no header mbuf");
|
|
|
|
len = m0->m_pkthdr.len;
|
|
pad = len & 1;
|
|
|
|
#ifdef IYDEBUG
|
|
printf("%s: length is %d.\n", device_xname(&sc->sc_dev), len);
|
|
#endif
|
|
if (len < (ETHER_MIN_LEN - ETHER_CRC_LEN)) {
|
|
pad = ETHER_MIN_LEN - ETHER_CRC_LEN - len;
|
|
}
|
|
|
|
if (len + pad > ETHER_MAX_LEN) {
|
|
/* packet is obviously too large: toss it */
|
|
++ifp->if_oerrors;
|
|
IFQ_DEQUEUE(&ifp->if_snd, m0);
|
|
m_freem(m0);
|
|
continue;
|
|
}
|
|
|
|
if (ifp->if_bpf)
|
|
bpf_ops->bpf_mtap(ifp->if_bpf, m0);
|
|
|
|
avail = sc->tx_start - sc->tx_end;
|
|
if (avail <= 0)
|
|
avail += sc->tx_size;
|
|
|
|
#ifdef IYDEBUG
|
|
printf("%s: avail is %d.\n", device_xname(&sc->sc_dev), avail);
|
|
#endif
|
|
/*
|
|
* we MUST RUN at splnet here ---
|
|
* XXX todo: or even turn off the boards ints ??? hm...
|
|
*/
|
|
|
|
/* See if there is room to put another packet in the buffer. */
|
|
|
|
if ((len+pad+2*I595_XMT_HDRLEN) > avail) {
|
|
#ifdef IYDEBUG
|
|
printf("%s: len = %d, avail = %d, setting OACTIVE\n",
|
|
device_xname(&sc->sc_dev), len, avail);
|
|
#endif
|
|
/* mark interface as full ... */
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
|
|
/* and wait for any transmission result */
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(2));
|
|
|
|
temp = bus_space_read_1(iot, ioh, REG1);
|
|
bus_space_write_1(iot, ioh, REG1,
|
|
temp & ~XMT_CHAIN_INT);
|
|
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(0));
|
|
|
|
return;
|
|
}
|
|
|
|
/* we know it fits in the hardware now, so dequeue it */
|
|
IFQ_DEQUEUE(&ifp->if_snd, m0);
|
|
|
|
last = sc->tx_end;
|
|
end = last + pad + len + I595_XMT_HDRLEN;
|
|
|
|
if (end >= sc->sram) {
|
|
if ((sc->sram - last) <= I595_XMT_HDRLEN) {
|
|
/* keep header in one piece */
|
|
last = sc->rx_size;
|
|
end = last + pad + len + I595_XMT_HDRLEN;
|
|
} else
|
|
end -= sc->tx_size;
|
|
}
|
|
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, last);
|
|
bus_space_write_stream_2(iot, ioh, MEM_PORT_REG,
|
|
htole16(XMT_CMD));
|
|
|
|
bus_space_write_2(iot, ioh, MEM_PORT_REG, 0);
|
|
bus_space_write_2(iot, ioh, MEM_PORT_REG, 0);
|
|
|
|
bus_space_write_stream_2(iot, ioh, MEM_PORT_REG,
|
|
htole16(len + pad));
|
|
|
|
residual = resval = 0;
|
|
|
|
while ((m = m0)!=0) {
|
|
data = mtod(m, void *);
|
|
llen = m->m_len;
|
|
if (residual) {
|
|
#ifdef IYDEBUG
|
|
printf("%s: merging residual with next mbuf.\n",
|
|
device_xname(&sc->sc_dev));
|
|
#endif
|
|
resval |= *data << 8;
|
|
bus_space_write_stream_2(iot, ioh,
|
|
MEM_PORT_REG, resval);
|
|
--llen;
|
|
++data;
|
|
}
|
|
/*
|
|
* XXX ALIGNMENT LOSSAGE HERE.
|
|
*/
|
|
if (llen > 1)
|
|
bus_space_write_multi_stream_2(iot, ioh,
|
|
MEM_PORT_REG, (u_int16_t *) data,
|
|
llen>>1);
|
|
residual = llen & 1;
|
|
if (residual) {
|
|
resval = *(data + llen - 1);
|
|
#ifdef IYDEBUG
|
|
printf("%s: got odd mbuf to send.\n",
|
|
device_xname(&sc->sc_dev));
|
|
#endif
|
|
}
|
|
|
|
MFREE(m, m0);
|
|
}
|
|
|
|
if (residual)
|
|
bus_space_write_stream_2(iot, ioh, MEM_PORT_REG,
|
|
resval);
|
|
|
|
pad >>= 1;
|
|
while (pad-- > 0)
|
|
bus_space_write_stream_2(iot, ioh, MEM_PORT_REG, 0);
|
|
|
|
#ifdef IYDEBUG
|
|
printf("%s: new last = 0x%x, end = 0x%x.\n",
|
|
device_xname(&sc->sc_dev), last, end);
|
|
printf("%s: old start = 0x%x, end = 0x%x, last = 0x%x\n",
|
|
device_xname(&sc->sc_dev), sc->tx_start, sc->tx_end, sc->tx_last);
|
|
#endif
|
|
|
|
if (sc->tx_start != sc->tx_end) {
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG,
|
|
sc->tx_last + XMT_COUNT);
|
|
|
|
/*
|
|
* XXX We keep stat in le order, to potentially save
|
|
* a byte swap.
|
|
*/
|
|
stat = bus_space_read_stream_2(iot, ioh, MEM_PORT_REG);
|
|
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG,
|
|
sc->tx_last + XMT_CHAIN);
|
|
|
|
bus_space_write_stream_2(iot, ioh, MEM_PORT_REG,
|
|
htole16(last));
|
|
|
|
bus_space_write_stream_2(iot, ioh, MEM_PORT_REG,
|
|
stat | htole16(CHAIN));
|
|
#ifdef IYDEBUG
|
|
printf("%s: setting 0x%x to 0x%x\n",
|
|
device_xname(&sc->sc_dev), sc->tx_last + XMT_COUNT,
|
|
le16toh(stat) | CHAIN);
|
|
#endif
|
|
}
|
|
stat = bus_space_read_2(iot, ioh, MEM_PORT_REG); /* dummy read */
|
|
|
|
/* XXX todo: enable ints here if disabled */
|
|
|
|
++ifp->if_opackets;
|
|
|
|
if (sc->tx_start == sc->tx_end) {
|
|
bus_space_write_2(iot, ioh, XMT_ADDR_REG, last);
|
|
bus_space_write_1(iot, ioh, 0, XMT_CMD);
|
|
sc->tx_start = last;
|
|
#ifdef IYDEBUG
|
|
printf("%s: writing 0x%x to XAR and giving XCMD\n",
|
|
device_xname(&sc->sc_dev), last);
|
|
#endif
|
|
} else {
|
|
bus_space_write_1(iot, ioh, 0, RESUME_XMT_CMD);
|
|
#ifdef IYDEBUG
|
|
printf("%s: giving RESUME_XCMD\n",
|
|
device_xname(&sc->sc_dev));
|
|
#endif
|
|
}
|
|
sc->tx_last = last;
|
|
sc->tx_end = end;
|
|
}
|
|
/* and wait only for end of transmission chain */
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(2));
|
|
|
|
temp = bus_space_read_1(iot, ioh, REG1);
|
|
bus_space_write_1(iot, ioh, REG1, temp | XMT_CHAIN_INT);
|
|
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(0));
|
|
}
|
|
|
|
|
|
static inline void
|
|
eepromwritebit(bus_space_tag_t iot, bus_space_handle_t ioh, int what)
|
|
{
|
|
bus_space_write_1(iot, ioh, EEPROM_REG, what);
|
|
delay(1);
|
|
bus_space_write_1(iot, ioh, EEPROM_REG, what|EESK);
|
|
delay(1);
|
|
bus_space_write_1(iot, ioh, EEPROM_REG, what);
|
|
delay(1);
|
|
}
|
|
|
|
static inline int
|
|
eepromreadbit(bus_space_tag_t iot, bus_space_handle_t ioh)
|
|
{
|
|
int b;
|
|
|
|
bus_space_write_1(iot, ioh, EEPROM_REG, EECS|EESK);
|
|
delay(1);
|
|
b = bus_space_read_1(iot, ioh, EEPROM_REG);
|
|
bus_space_write_1(iot, ioh, EEPROM_REG, EECS);
|
|
delay(1);
|
|
|
|
return ((b & EEDO) != 0);
|
|
}
|
|
|
|
static u_int16_t
|
|
eepromread(bus_space_tag_t iot, bus_space_handle_t ioh, int offset)
|
|
{
|
|
volatile int i;
|
|
volatile int j;
|
|
volatile u_int16_t readval;
|
|
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(2));
|
|
delay(1);
|
|
bus_space_write_1(iot, ioh, EEPROM_REG, EECS); /* XXXX??? */
|
|
delay(1);
|
|
|
|
eepromwritebit(iot, ioh, EECS|EEDI);
|
|
eepromwritebit(iot, ioh, EECS|EEDI);
|
|
eepromwritebit(iot, ioh, EECS);
|
|
|
|
for (j=5; j>=0; --j) {
|
|
if ((offset>>j) & 1)
|
|
eepromwritebit(iot, ioh, EECS|EEDI);
|
|
else
|
|
eepromwritebit(iot, ioh, EECS);
|
|
}
|
|
|
|
for (readval=0, i=0; i<16; ++i) {
|
|
readval<<=1;
|
|
readval |= eepromreadbit(iot, ioh);
|
|
}
|
|
|
|
bus_space_write_1(iot, ioh, EEPROM_REG, 0|EESK);
|
|
delay(1);
|
|
bus_space_write_1(iot, ioh, EEPROM_REG, 0);
|
|
|
|
bus_space_write_1(iot, ioh, COMMAND_REG, BANK_SEL(0));
|
|
|
|
return readval;
|
|
}
|
|
|
|
/*
|
|
* Device timeout/watchdog routine. Entered if the device neglects to generate
|
|
* an interrupt after a transmit has been started on it.
|
|
*/
|
|
void
|
|
iywatchdog(struct ifnet *ifp)
|
|
{
|
|
struct iy_softc *sc = ifp->if_softc;
|
|
|
|
log(LOG_ERR, "%s: device timeout\n", device_xname(&sc->sc_dev));
|
|
++sc->sc_ethercom.ec_if.if_oerrors;
|
|
iyreset(sc);
|
|
}
|
|
|
|
/*
|
|
* What to do upon receipt of an interrupt.
|
|
*/
|
|
int
|
|
iyintr(void *arg)
|
|
{
|
|
struct iy_softc *sc;
|
|
struct ifnet *ifp;
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
|
|
u_short status;
|
|
|
|
sc = arg;
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
|
|
ifp = &sc->sc_ethercom.ec_if;
|
|
|
|
status = bus_space_read_1(iot, ioh, STATUS_REG);
|
|
#ifdef IYDEBUG
|
|
if (status & ALL_INTS) {
|
|
char sbuf[128];
|
|
|
|
snprintb(sbuf, sizeof(sbuf), "\020\1RX_STP\2RX\3TX\4EXEC",
|
|
status);
|
|
printf("%s: got interrupt %s", device_xname(&sc->sc_dev), sbuf);
|
|
|
|
if (status & EXEC_INT) {
|
|
snprintb(sbuf, sizeof(sbuf),
|
|
"\020\6ABORT", bus_space_read_1(iot, ioh, 0));
|
|
printf(" event %s\n", sbuf);
|
|
} else
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
if ((status & (RX_INT | TX_INT)) == 0)
|
|
return 0;
|
|
|
|
if (status & RX_INT) {
|
|
iy_intr_rx(sc);
|
|
bus_space_write_1(iot, ioh, STATUS_REG, RX_INT);
|
|
}
|
|
if (status & TX_INT) {
|
|
/* Tell feeders we may be able to accept more data... */
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
/* and get more data. */
|
|
iystart(ifp);
|
|
bus_space_write_1(iot, ioh, STATUS_REG, TX_INT);
|
|
}
|
|
|
|
#if NRND > 0
|
|
rnd_add_uint32(&sc->rnd_source, status);
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
void
|
|
iyget(struct iy_softc *sc, bus_space_tag_t iot, bus_space_handle_t ioh, int rxlen)
|
|
{
|
|
struct mbuf *m, *top, **mp;
|
|
struct ifnet *ifp;
|
|
int len;
|
|
|
|
ifp = &sc->sc_ethercom.ec_if;
|
|
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == 0)
|
|
goto dropped;
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = rxlen;
|
|
len = MHLEN;
|
|
top = 0;
|
|
mp = ⊤
|
|
|
|
while (rxlen > 0) {
|
|
if (top) {
|
|
MGET(m, M_DONTWAIT, MT_DATA);
|
|
if (m == 0) {
|
|
m_freem(top);
|
|
goto dropped;
|
|
}
|
|
len = MLEN;
|
|
}
|
|
if (rxlen >= MINCLSIZE) {
|
|
MCLGET(m, M_DONTWAIT);
|
|
if ((m->m_flags & M_EXT) == 0) {
|
|
m_free(m);
|
|
m_freem(top);
|
|
goto dropped;
|
|
}
|
|
len = MCLBYTES;
|
|
}
|
|
len = min(rxlen, len);
|
|
/*
|
|
* XXX ALIGNMENT LOSSAGE HERE.
|
|
*/
|
|
if (len > 1) {
|
|
len &= ~1;
|
|
|
|
bus_space_read_multi_stream_2(iot, ioh, MEM_PORT_REG,
|
|
mtod(m, u_int16_t *), len/2);
|
|
} else {
|
|
#ifdef IYDEBUG
|
|
printf("%s: received odd mbuf\n", device_xname(&sc->sc_dev));
|
|
#endif
|
|
*(mtod(m, char *)) = bus_space_read_stream_2(iot, ioh,
|
|
MEM_PORT_REG);
|
|
}
|
|
m->m_len = len;
|
|
rxlen -= len;
|
|
*mp = m;
|
|
mp = &m->m_next;
|
|
}
|
|
|
|
if (top == NULL)
|
|
return;
|
|
|
|
/* XXX receive the top here */
|
|
++ifp->if_ipackets;
|
|
|
|
|
|
if (ifp->if_bpf)
|
|
bpf_ops->bpf_mtap(ifp->if_bpf, top);
|
|
(*ifp->if_input)(ifp, top);
|
|
return;
|
|
|
|
dropped:
|
|
++ifp->if_ierrors;
|
|
return;
|
|
}
|
|
|
|
void
|
|
iy_intr_rx(struct iy_softc *sc)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
|
|
u_int rxadrs, rxevnt, rxstatus, rxnext, rxlen;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
|
|
rxadrs = sc->rx_start;
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, rxadrs);
|
|
rxevnt = le16toh(bus_space_read_stream_2(iot, ioh, MEM_PORT_REG));
|
|
rxnext = 0;
|
|
|
|
while (rxevnt == RCV_DONE) {
|
|
rxstatus = le16toh(bus_space_read_stream_2(iot, ioh,
|
|
MEM_PORT_REG));
|
|
rxnext = le16toh(bus_space_read_stream_2(iot, ioh,
|
|
MEM_PORT_REG));
|
|
rxlen = le16toh(bus_space_read_stream_2(iot, ioh,
|
|
MEM_PORT_REG));
|
|
#ifdef IYDEBUG
|
|
{
|
|
char sbuf[128];
|
|
|
|
snprintb(sbuf, sizeof(sbuf),
|
|
"\020\1RCLD\2IA_MCH\010SHORT\011OVRN\013ALGERR"
|
|
"\014CRCERR\015LENERR\016RCVOK\020TYP", rxstatus);
|
|
|
|
printf("%s: pck at 0x%04x stat %s next 0x%x len 0x%x\n",
|
|
device_xname(&sc->sc_dev), rxadrs, sbuf, rxnext, rxlen);
|
|
}
|
|
#endif
|
|
iyget(sc, iot, ioh, rxlen);
|
|
|
|
/* move stop address */
|
|
bus_space_write_2(iot, ioh, RCV_STOP_LOW,
|
|
rxnext == 0 ? sc->rx_size - 2 : rxnext - 2);
|
|
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, rxnext);
|
|
rxadrs = rxnext;
|
|
rxevnt = le16toh(bus_space_read_stream_2(iot, ioh,
|
|
MEM_PORT_REG));
|
|
}
|
|
sc->rx_start = rxnext;
|
|
}
|
|
|
|
void
|
|
iy_intr_tx(struct iy_softc *sc)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
struct ifnet *ifp;
|
|
u_int txstatus, txstat2, txlen, txnext;
|
|
|
|
ifp = &sc->sc_ethercom.ec_if;
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
|
|
while (sc->tx_start != sc->tx_end) {
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, sc->tx_start);
|
|
txstatus = le16toh(bus_space_read_stream_2(iot, ioh,
|
|
MEM_PORT_REG));
|
|
|
|
if ((txstatus & (TX_DONE|CMD_MASK)) != (TX_DONE|XMT_CMD))
|
|
break;
|
|
|
|
txstat2 = le16toh(bus_space_read_stream_2(iot, ioh,
|
|
MEM_PORT_REG));
|
|
txnext = le16toh(bus_space_read_stream_2(iot, ioh,
|
|
MEM_PORT_REG));
|
|
txlen = le16toh(bus_space_read_stream_2(iot, ioh,
|
|
MEM_PORT_REG));
|
|
#ifdef IYDEBUG
|
|
{
|
|
char sbuf[128];
|
|
|
|
snprintb(sbuf, sizeof(sbuf),
|
|
"\020\6MAX_COL\7HRT_BEAT\010TX_DEF"
|
|
"\011UND_RUN\012JERR\013LST_CRS"
|
|
"\014LTCOL\016TX_OK\020COLL", txstat2);
|
|
|
|
printf("txstat 0x%x stat2 0x%s next 0x%x len 0x%x\n",
|
|
txstatus, sbuf, txnext, txlen);
|
|
}
|
|
#endif
|
|
if (txlen & CHAIN)
|
|
sc->tx_start = txnext;
|
|
else
|
|
sc->tx_start = sc->tx_end;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
if (txstat2 & 0x0020)
|
|
ifp->if_collisions += 16;
|
|
else
|
|
ifp->if_collisions += txstat2 & 0x000f;
|
|
|
|
if ((txstat2 & 0x2000) == 0)
|
|
++ifp->if_oerrors;
|
|
}
|
|
}
|
|
|
|
int
|
|
iyioctl(struct ifnet *ifp, u_long cmd, void *data)
|
|
{
|
|
struct iy_softc *sc;
|
|
struct ifaddr *ifa;
|
|
struct ifreq *ifr;
|
|
int s, error = 0;
|
|
|
|
sc = ifp->if_softc;
|
|
ifa = (struct ifaddr *)data;
|
|
ifr = (struct ifreq *)data;
|
|
|
|
#ifdef IYDEBUG
|
|
printf("iyioctl called with ifp %p (%s) cmd 0x%lx data %p\n",
|
|
ifp, ifp->if_xname, cmd, data);
|
|
#endif
|
|
|
|
s = splnet();
|
|
|
|
switch (cmd) {
|
|
|
|
case SIOCINITIFADDR:
|
|
ifp->if_flags |= IFF_UP;
|
|
|
|
iyinit(sc);
|
|
switch (ifa->ifa_addr->sa_family) {
|
|
#ifdef INET
|
|
case AF_INET:
|
|
arp_ifinit(ifp, ifa);
|
|
break;
|
|
#endif
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case SIOCSIFFLAGS:
|
|
if ((error = ifioctl_common(ifp, cmd, data)) != 0)
|
|
break;
|
|
sc->promisc = ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI);
|
|
/* XXX re-use ether_ioctl() */
|
|
switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) {
|
|
case IFF_RUNNING:
|
|
/*
|
|
* If interface is marked down and it is running, then
|
|
* stop it.
|
|
*/
|
|
iystop(sc);
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
break;
|
|
case IFF_UP:
|
|
/*
|
|
* If interface is marked up and it is stopped, then
|
|
* start it.
|
|
*/
|
|
iyinit(sc);
|
|
break;
|
|
default:
|
|
/*
|
|
* Reset the interface to pick up changes in any other
|
|
* flags that affect hardware registers.
|
|
*/
|
|
iystop(sc);
|
|
iyinit(sc);
|
|
break;
|
|
}
|
|
#ifdef IYDEBUGX
|
|
if (ifp->if_flags & IFF_DEBUG)
|
|
sc->sc_debug = IFY_ALL;
|
|
else
|
|
sc->sc_debug = 0;
|
|
#endif
|
|
break;
|
|
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) {
|
|
/*
|
|
* Multicast list has changed; set the hardware filter
|
|
* accordingly.
|
|
*/
|
|
if (ifp->if_flags & IFF_RUNNING) {
|
|
/* XXX can't make it work otherwise */
|
|
iyreset(sc);
|
|
iy_mc_reset(sc);
|
|
}
|
|
error = 0;
|
|
}
|
|
break;
|
|
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->iy_ifmedia, cmd);
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, cmd, data);
|
|
}
|
|
splx(s);
|
|
return error;
|
|
}
|
|
|
|
int
|
|
iy_mediachange(struct ifnet *ifp)
|
|
{
|
|
struct iy_softc *sc = ifp->if_softc;
|
|
|
|
if (IFM_TYPE(sc->iy_ifmedia.ifm_media) != IFM_ETHER)
|
|
return EINVAL;
|
|
switch(IFM_SUBTYPE(sc->iy_ifmedia.ifm_media)) {
|
|
case IFM_10_5:
|
|
case IFM_10_2:
|
|
case IFM_10_T:
|
|
case IFM_AUTO:
|
|
iystop(sc);
|
|
iyinit(sc);
|
|
return 0;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
}
|
|
|
|
void
|
|
iy_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct iy_softc *sc = ifp->if_softc;
|
|
|
|
ifmr->ifm_active = sc->iy_media;
|
|
ifmr->ifm_status = IFM_AVALID | IFM_ACTIVE;
|
|
}
|
|
|
|
|
|
static void
|
|
iy_mc_setup(struct iy_softc *sc)
|
|
{
|
|
struct ether_multi *enm;
|
|
struct ether_multistep step;
|
|
struct ethercom *ecp;
|
|
struct ifnet *ifp;
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
int avail, last /*, end*/ , len;
|
|
int timeout;
|
|
volatile u_int16_t dum;
|
|
u_int8_t temp;
|
|
|
|
|
|
ecp = &sc->sc_ethercom;
|
|
ifp = &ecp->ec_if;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
|
|
len = 6 * ecp->ec_multicnt;
|
|
|
|
avail = sc->tx_start - sc->tx_end;
|
|
if (avail <= 0)
|
|
avail += sc->tx_size;
|
|
if (ifp->if_flags & IFF_DEBUG)
|
|
printf("%s: iy_mc_setup called, %d addresses, "
|
|
"%d/%d bytes needed/avail\n", ifp->if_xname,
|
|
ecp->ec_multicnt, len + I595_XMT_HDRLEN, avail);
|
|
|
|
last = sc->rx_size;
|
|
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(2));
|
|
bus_space_write_1(iot, ioh, RECV_MODES_REG, MATCH_BRDCST);
|
|
/* XXX VOODOO */
|
|
temp = bus_space_read_1(iot, ioh, MEDIA_SELECT);
|
|
bus_space_write_1(iot, ioh, MEDIA_SELECT, temp);
|
|
/* XXX END OF VOODOO */
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(0));
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, last);
|
|
bus_space_write_stream_2(iot, ioh, MEM_PORT_REG, htole16(MC_SETUP_CMD));
|
|
bus_space_write_2(iot, ioh, MEM_PORT_REG, 0);
|
|
bus_space_write_2(iot, ioh, MEM_PORT_REG, 0);
|
|
bus_space_write_stream_2(iot, ioh, MEM_PORT_REG, htole16(len));
|
|
|
|
ETHER_FIRST_MULTI(step, ecp, enm);
|
|
while(enm) {
|
|
/*
|
|
* XXX ALIGNMENT LOSSAGE HERE?
|
|
*/
|
|
bus_space_write_multi_stream_2(iot, ioh, MEM_PORT_REG,
|
|
(u_int16_t *) enm->enm_addrlo, 3);
|
|
|
|
ETHER_NEXT_MULTI(step, enm);
|
|
}
|
|
dum = bus_space_read_2(iot, ioh, MEM_PORT_REG); /* dummy read */
|
|
bus_space_write_2(iot, ioh, XMT_ADDR_REG, last);
|
|
bus_space_write_1(iot, ioh, 0, MC_SETUP_CMD);
|
|
|
|
|
|
sc->tx_start = sc->rx_size;
|
|
sc->tx_end = sc->rx_size + I595_XMT_HDRLEN + len;
|
|
|
|
for (timeout=0; timeout<100; timeout++) {
|
|
DELAY(2);
|
|
if ((bus_space_read_1(iot, ioh, STATUS_REG) & EXEC_INT) == 0)
|
|
continue;
|
|
|
|
temp = bus_space_read_1(iot, ioh, 0);
|
|
bus_space_write_1(iot, ioh, STATUS_REG, EXEC_INT);
|
|
#ifdef DIAGNOSTIC
|
|
if (temp & 0x20) {
|
|
aprint_error_dev(&sc->sc_dev, "mc setup failed, %d usec\n",
|
|
timeout * 2);
|
|
} else if (((temp & 0x0f) == 0x03) &&
|
|
(ifp->if_flags & IFF_DEBUG)) {
|
|
printf("%s: mc setup done, %d usec\n",
|
|
device_xname(&sc->sc_dev), timeout * 2);
|
|
}
|
|
#endif
|
|
break;
|
|
}
|
|
sc->tx_start = sc->tx_end;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
}
|
|
|
|
static void
|
|
iy_mc_reset(struct iy_softc *sc)
|
|
{
|
|
struct ether_multi *enm;
|
|
struct ether_multistep step;
|
|
struct ethercom *ecp;
|
|
struct ifnet *ifp;
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
u_int16_t temp;
|
|
|
|
ecp = &sc->sc_ethercom;
|
|
ifp = &ecp->ec_if;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
|
|
if (ecp->ec_multicnt > 63) {
|
|
ifp->if_flags |= IFF_ALLMULTI;
|
|
|
|
} else if (ecp->ec_multicnt > 0) {
|
|
/*
|
|
* Step through the list of addresses.
|
|
*/
|
|
ETHER_FIRST_MULTI(step, ecp, enm);
|
|
while(enm) {
|
|
if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 6) != 0) {
|
|
ifp->if_flags |= IFF_ALLMULTI;
|
|
goto setupmulti;
|
|
}
|
|
ETHER_NEXT_MULTI(step, enm);
|
|
}
|
|
/* OK, we really need to do it now: */
|
|
#if 0
|
|
if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE))
|
|
!= IFF_RUNNING) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
sc->want_mc_setup = 1;
|
|
return;
|
|
}
|
|
#endif
|
|
iy_mc_setup(sc);
|
|
} else {
|
|
ifp->if_flags &= ~IFF_ALLMULTI;
|
|
}
|
|
|
|
setupmulti:
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(2));
|
|
if (ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI)) {
|
|
temp = MATCH_ALL;
|
|
} else
|
|
temp = MATCH_BRDCST;
|
|
|
|
bus_space_write_1(iot, ioh, RECV_MODES_REG, temp);
|
|
/* XXX VOODOO */
|
|
temp = bus_space_read_1(iot, ioh, MEDIA_SELECT);
|
|
bus_space_write_1(iot, ioh, MEDIA_SELECT, temp);
|
|
/* XXX END OF VOODOO */
|
|
|
|
/* XXX TBD: setup hardware for all multicasts */
|
|
bus_space_write_1(iot, ioh, 0, BANK_SEL(0));
|
|
return;
|
|
}
|
|
|
|
#ifdef IYDEBUGX
|
|
void
|
|
print_rbd(volatile struct ie_recv_buf_desc *rbd)
|
|
{
|
|
printf("RBD at %08lx:\nactual %04x, next %04x, buffer %08x\n"
|
|
"length %04x, mbz %04x\n", (u_long)rbd, rbd->ie_rbd_actual,
|
|
rbd->ie_rbd_next, rbd->ie_rbd_buffer, rbd->ie_rbd_length,
|
|
rbd->mbz);
|
|
}
|
|
#endif
|
|
|
|
void
|
|
iyprobemem(struct iy_softc *sc)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
int testing;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
|
|
bus_space_write_1(iot, ioh, COMMAND_REG, BANK_SEL(0));
|
|
delay(1);
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, 4096-2);
|
|
bus_space_write_2(iot, ioh, MEM_PORT_REG, 0);
|
|
|
|
for (testing=65536; testing >= 4096; testing >>= 1) {
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, testing-2);
|
|
bus_space_write_2(iot, ioh, MEM_PORT_REG, 0xdead);
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, testing-2);
|
|
if (bus_space_read_2(iot, ioh, MEM_PORT_REG) != 0xdead) {
|
|
#ifdef IYMEMDEBUG
|
|
printf("%s: Didn't keep 0xdead at 0x%x\n",
|
|
device_xname(&sc->sc_dev), testing-2);
|
|
#endif
|
|
continue;
|
|
}
|
|
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, testing-2);
|
|
bus_space_write_2(iot, ioh, MEM_PORT_REG, 0xbeef);
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, testing-2);
|
|
if (bus_space_read_2(iot, ioh, MEM_PORT_REG) != 0xbeef) {
|
|
#ifdef IYMEMDEBUG
|
|
printf("%s: Didn't keep 0xbeef at 0x%x\n",
|
|
device_xname(&sc->sc_dev), testing-2);
|
|
#endif
|
|
continue;
|
|
}
|
|
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, 0);
|
|
bus_space_write_2(iot, ioh, MEM_PORT_REG, 0);
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, testing >> 1);
|
|
bus_space_write_2(iot, ioh, MEM_PORT_REG, testing >> 1);
|
|
bus_space_write_2(iot, ioh, HOST_ADDR_REG, 0);
|
|
if (bus_space_read_2(iot, ioh, MEM_PORT_REG) == (testing >> 1)) {
|
|
#ifdef IYMEMDEBUG
|
|
printf("%s: 0x%x alias of 0x0\n",
|
|
device_xname(&sc->sc_dev), testing >> 1);
|
|
#endif
|
|
continue;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
sc->sram = testing;
|
|
|
|
switch(testing) {
|
|
case 65536:
|
|
/* 4 NFS packets + overhead RX, 2 NFS + overhead TX */
|
|
sc->rx_size = 44*1024;
|
|
break;
|
|
|
|
case 32768:
|
|
/* 2 NFS packets + overhead RX, 1 NFS + overhead TX */
|
|
sc->rx_size = 22*1024;
|
|
break;
|
|
|
|
case 16384:
|
|
/* 1 NFS packet + overhead RX, 4 big packets TX */
|
|
sc->rx_size = 10*1024;
|
|
break;
|
|
default:
|
|
sc->rx_size = testing/2;
|
|
break;
|
|
}
|
|
sc->tx_size = testing - sc->rx_size;
|
|
}
|
|
|
|
static int
|
|
eepromreadall(bus_space_tag_t iot, bus_space_handle_t ioh, u_int16_t *wordp, int maxi)
|
|
{
|
|
int i;
|
|
u_int16_t checksum, tmp;
|
|
|
|
checksum = 0;
|
|
|
|
for (i=0; i<EEPP_LENGTH; ++i) {
|
|
tmp = eepromread(iot, ioh, i);
|
|
checksum += tmp;
|
|
if (i<maxi)
|
|
wordp[i] = tmp;
|
|
}
|
|
|
|
if (checksum != EEPP_CHKSUM) {
|
|
#ifdef IYDEBUG
|
|
printf("wrong EEPROM checksum 0x%x should be 0x%x\n",
|
|
checksum, EEPP_CHKSUM);
|
|
#endif
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|