NetBSD/sys/dev/usb/if_cue.c
drochner 8258b792b7 Introduce different autoconf interface attributes for USB drivers
matching (and handling) a whole device and those which match an
interface only. This will allow to enforce some rules, eg that
the former don't use interface information for matching or that the
latter don't modify global device state.
The previous way left too much freedom do the drivers which led to
inconsistencies and abuse.
For now, I've not changed locators and submatch rules, this will
happen later.
There should not be any change in behaviour, except in the case of
some drivers which did behave inconsistently:
if_atu, if_axe, uep: matched the configured device in the interface
 stage, but did configuration again. I've converted them to match
 in the device stage.
ustir, utoppy: matched in the interface stage, but only against
 vendor/device information, and used any configuration/interface
 without checking. Changed to match in device stage, and added
 some simple code to configure and use the first interface.
If you have one of those devices, please test!
2007-03-13 13:51:53 +00:00

1343 lines
31 KiB
C

/* $NetBSD: if_cue.c,v 1.50 2007/03/13 13:51:54 drochner Exp $ */
/*
* Copyright (c) 1997, 1998, 1999, 2000
* Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD: src/sys/dev/usb/if_cue.c,v 1.4 2000/01/16 22:45:06 wpaul Exp $
*/
/*
* CATC USB-EL1210A USB to ethernet driver. Used in the CATC Netmate
* adapters and others.
*
* Written by Bill Paul <wpaul@ee.columbia.edu>
* Electrical Engineering Department
* Columbia University, New York City
*/
/*
* The CATC USB-EL1210A provides USB ethernet support at 10Mbps. The
* RX filter uses a 512-bit multicast hash table, single perfect entry
* for the station address, and promiscuous mode. Unlike the ADMtek
* and KLSI chips, the CATC ASIC supports read and write combining
* mode where multiple packets can be transfered using a single bulk
* transaction, which helps performance a great deal.
*/
/*
* Ported to NetBSD and somewhat rewritten by Lennart Augustsson.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_cue.c,v 1.50 2007/03/13 13:51:54 drochner Exp $");
#if defined(__NetBSD__)
#include "opt_inet.h"
#include "bpfilter.h"
#include "rnd.h"
#elif defined(__OpenBSD__)
#include "bpfilter.h"
#endif /* defined(__OpenBSD__) */
#include <sys/param.h>
#include <sys/systm.h>
#if !defined(__OpenBSD__)
#include <sys/callout.h>
#endif
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/device.h>
#if NRND > 0
#include <sys/rnd.h>
#endif
#include <net/if.h>
#if defined(__NetBSD__)
#include <net/if_arp.h>
#endif
#include <net/if_dl.h>
#define BPF_MTAP(ifp, m) bpf_mtap((ifp)->if_bpf, (m))
#if NBPFILTER > 0
#include <net/bpf.h>
#endif
#if defined(__NetBSD__)
#include <net/if_ether.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/if_inarp.h>
#endif
#endif /* defined(__NetBSD__) */
#if defined(__OpenBSD__)
#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_ether.h>
#endif
#endif /* defined(__OpenBSD__) */
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/if_cuereg.h>
#ifdef CUE_DEBUG
#define DPRINTF(x) if (cuedebug) logprintf x
#define DPRINTFN(n,x) if (cuedebug >= (n)) logprintf x
int cuedebug = 0;
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif
/*
* Various supported device vendors/products.
*/
Static struct usb_devno cue_devs[] = {
{ USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE },
{ USB_VENDOR_CATC, USB_PRODUCT_CATC_NETMATE2 },
{ USB_VENDOR_SMARTBRIDGES, USB_PRODUCT_SMARTBRIDGES_SMARTLINK },
/* Belkin F5U111 adapter covered by NETMATE entry */
};
#define cue_lookup(v, p) (usb_lookup(cue_devs, v, p))
USB_DECLARE_DRIVER(cue);
Static int cue_open_pipes(struct cue_softc *);
Static int cue_tx_list_init(struct cue_softc *);
Static int cue_rx_list_init(struct cue_softc *);
Static int cue_newbuf(struct cue_softc *, struct cue_chain *, struct mbuf *);
Static int cue_send(struct cue_softc *, struct mbuf *, int);
Static void cue_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
Static void cue_txeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
Static void cue_tick(void *);
Static void cue_tick_task(void *);
Static void cue_start(struct ifnet *);
Static int cue_ioctl(struct ifnet *, u_long, void *);
Static void cue_init(void *);
Static void cue_stop(struct cue_softc *);
Static void cue_watchdog(struct ifnet *);
Static void cue_setmulti(struct cue_softc *);
Static u_int32_t cue_crc(const char *);
Static void cue_reset(struct cue_softc *);
Static int cue_csr_read_1(struct cue_softc *, int);
Static int cue_csr_write_1(struct cue_softc *, int, int);
Static int cue_csr_read_2(struct cue_softc *, int);
#if 0
Static int cue_csr_write_2(struct cue_softc *, int, int);
#endif
Static int cue_mem(struct cue_softc *, int, int, void *, int);
Static int cue_getmac(struct cue_softc *, void *);
#define CUE_SETBIT(sc, reg, x) \
cue_csr_write_1(sc, reg, cue_csr_read_1(sc, reg) | (x))
#define CUE_CLRBIT(sc, reg, x) \
cue_csr_write_1(sc, reg, cue_csr_read_1(sc, reg) & ~(x))
Static int
cue_csr_read_1(struct cue_softc *sc, int reg)
{
usb_device_request_t req;
usbd_status err;
u_int8_t val = 0;
if (sc->cue_dying)
return (0);
req.bmRequestType = UT_READ_VENDOR_DEVICE;
req.bRequest = CUE_CMD_READREG;
USETW(req.wValue, 0);
USETW(req.wIndex, reg);
USETW(req.wLength, 1);
err = usbd_do_request(sc->cue_udev, &req, &val);
if (err) {
DPRINTF(("%s: cue_csr_read_1: reg=0x%x err=%s\n",
USBDEVNAME(sc->cue_dev), reg, usbd_errstr(err)));
return (0);
}
DPRINTFN(10,("%s: cue_csr_read_1 reg=0x%x val=0x%x\n",
USBDEVNAME(sc->cue_dev), reg, val));
return (val);
}
Static int
cue_csr_read_2(struct cue_softc *sc, int reg)
{
usb_device_request_t req;
usbd_status err;
uWord val;
if (sc->cue_dying)
return (0);
req.bmRequestType = UT_READ_VENDOR_DEVICE;
req.bRequest = CUE_CMD_READREG;
USETW(req.wValue, 0);
USETW(req.wIndex, reg);
USETW(req.wLength, 2);
err = usbd_do_request(sc->cue_udev, &req, &val);
DPRINTFN(10,("%s: cue_csr_read_2 reg=0x%x val=0x%x\n",
USBDEVNAME(sc->cue_dev), reg, UGETW(val)));
if (err) {
DPRINTF(("%s: cue_csr_read_2: reg=0x%x err=%s\n",
USBDEVNAME(sc->cue_dev), reg, usbd_errstr(err)));
return (0);
}
return (UGETW(val));
}
Static int
cue_csr_write_1(struct cue_softc *sc, int reg, int val)
{
usb_device_request_t req;
usbd_status err;
if (sc->cue_dying)
return (0);
DPRINTFN(10,("%s: cue_csr_write_1 reg=0x%x val=0x%x\n",
USBDEVNAME(sc->cue_dev), reg, val));
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = CUE_CMD_WRITEREG;
USETW(req.wValue, val);
USETW(req.wIndex, reg);
USETW(req.wLength, 0);
err = usbd_do_request(sc->cue_udev, &req, NULL);
if (err) {
DPRINTF(("%s: cue_csr_write_1: reg=0x%x err=%s\n",
USBDEVNAME(sc->cue_dev), reg, usbd_errstr(err)));
return (-1);
}
DPRINTFN(20,("%s: cue_csr_write_1, after reg=0x%x val=0x%x\n",
USBDEVNAME(sc->cue_dev), reg, cue_csr_read_1(sc, reg)));
return (0);
}
#if 0
Static int
cue_csr_write_2(struct cue_softc *sc, int reg, int aval)
{
usb_device_request_t req;
usbd_status err;
uWord val;
int s;
if (sc->cue_dying)
return (0);
DPRINTFN(10,("%s: cue_csr_write_2 reg=0x%x val=0x%x\n",
USBDEVNAME(sc->cue_dev), reg, aval));
USETW(val, aval);
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = CUE_CMD_WRITEREG;
USETW(req.wValue, val);
USETW(req.wIndex, reg);
USETW(req.wLength, 0);
err = usbd_do_request(sc->cue_udev, &req, NULL);
if (err) {
DPRINTF(("%s: cue_csr_write_2: reg=0x%x err=%s\n",
USBDEVNAME(sc->cue_dev), reg, usbd_errstr(err)));
return (-1);
}
return (0);
}
#endif
Static int
cue_mem(struct cue_softc *sc, int cmd, int addr, void *buf, int len)
{
usb_device_request_t req;
usbd_status err;
DPRINTFN(10,("%s: cue_mem cmd=0x%x addr=0x%x len=%d\n",
USBDEVNAME(sc->cue_dev), cmd, addr, len));
if (cmd == CUE_CMD_READSRAM)
req.bmRequestType = UT_READ_VENDOR_DEVICE;
else
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = cmd;
USETW(req.wValue, 0);
USETW(req.wIndex, addr);
USETW(req.wLength, len);
err = usbd_do_request(sc->cue_udev, &req, buf);
if (err) {
DPRINTF(("%s: cue_csr_mem: addr=0x%x err=%s\n",
USBDEVNAME(sc->cue_dev), addr, usbd_errstr(err)));
return (-1);
}
return (0);
}
Static int
cue_getmac(struct cue_softc *sc, void *buf)
{
usb_device_request_t req;
usbd_status err;
DPRINTFN(10,("%s: cue_getmac\n", USBDEVNAME(sc->cue_dev)));
req.bmRequestType = UT_READ_VENDOR_DEVICE;
req.bRequest = CUE_CMD_GET_MACADDR;
USETW(req.wValue, 0);
USETW(req.wIndex, 0);
USETW(req.wLength, ETHER_ADDR_LEN);
err = usbd_do_request(sc->cue_udev, &req, buf);
if (err) {
printf("%s: read MAC address failed\n",USBDEVNAME(sc->cue_dev));
return (-1);
}
return (0);
}
#define CUE_POLY 0xEDB88320
#define CUE_BITS 9
Static u_int32_t
cue_crc(const char *addr)
{
u_int32_t idx, bit, data, crc;
/* Compute CRC for the address value. */
crc = 0xFFFFFFFF; /* initial value */
for (idx = 0; idx < 6; idx++) {
for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1)
crc = (crc >> 1) ^ (((crc ^ data) & 1) ? CUE_POLY : 0);
}
return (crc & ((1 << CUE_BITS) - 1));
}
Static void
cue_setmulti(struct cue_softc *sc)
{
struct ifnet *ifp;
struct ether_multi *enm;
struct ether_multistep step;
u_int32_t h, i;
ifp = GET_IFP(sc);
DPRINTFN(2,("%s: cue_setmulti if_flags=0x%x\n",
USBDEVNAME(sc->cue_dev), ifp->if_flags));
if (ifp->if_flags & IFF_PROMISC) {
allmulti:
ifp->if_flags |= IFF_ALLMULTI;
for (i = 0; i < CUE_MCAST_TABLE_LEN; i++)
sc->cue_mctab[i] = 0xFF;
cue_mem(sc, CUE_CMD_WRITESRAM, CUE_MCAST_TABLE_ADDR,
&sc->cue_mctab, CUE_MCAST_TABLE_LEN);
return;
}
/* first, zot all the existing hash bits */
for (i = 0; i < CUE_MCAST_TABLE_LEN; i++)
sc->cue_mctab[i] = 0;
/* now program new ones */
#if defined(__NetBSD__)
ETHER_FIRST_MULTI(step, &sc->cue_ec, enm);
#else
ETHER_FIRST_MULTI(step, &sc->arpcom, enm);
#endif
while (enm != NULL) {
if (memcmp(enm->enm_addrlo,
enm->enm_addrhi, ETHER_ADDR_LEN) != 0)
goto allmulti;
h = cue_crc(enm->enm_addrlo);
sc->cue_mctab[h >> 3] |= 1 << (h & 0x7);
ETHER_NEXT_MULTI(step, enm);
}
ifp->if_flags &= ~IFF_ALLMULTI;
/*
* Also include the broadcast address in the filter
* so we can receive broadcast frames.
*/
if (ifp->if_flags & IFF_BROADCAST) {
h = cue_crc(etherbroadcastaddr);
sc->cue_mctab[h >> 3] |= 1 << (h & 0x7);
}
cue_mem(sc, CUE_CMD_WRITESRAM, CUE_MCAST_TABLE_ADDR,
&sc->cue_mctab, CUE_MCAST_TABLE_LEN);
}
Static void
cue_reset(struct cue_softc *sc)
{
usb_device_request_t req;
usbd_status err;
DPRINTFN(2,("%s: cue_reset\n", USBDEVNAME(sc->cue_dev)));
if (sc->cue_dying)
return;
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = CUE_CMD_RESET;
USETW(req.wValue, 0);
USETW(req.wIndex, 0);
USETW(req.wLength, 0);
err = usbd_do_request(sc->cue_udev, &req, NULL);
if (err)
printf("%s: reset failed\n", USBDEVNAME(sc->cue_dev));
/* Wait a little while for the chip to get its brains in order. */
usbd_delay_ms(sc->cue_udev, 1);
}
/*
* Probe for a CATC chip.
*/
USB_MATCH(cue)
{
USB_MATCH_START(cue, uaa);
return (cue_lookup(uaa->vendor, uaa->product) != NULL ?
UMATCH_VENDOR_PRODUCT : UMATCH_NONE);
}
/*
* Attach the interface. Allocate softc structures, do ifmedia
* setup and ethernet/BPF attach.
*/
USB_ATTACH(cue)
{
USB_ATTACH_START(cue, sc, uaa);
char *devinfop;
int s;
u_char eaddr[ETHER_ADDR_LEN];
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
usbd_status err;
struct ifnet *ifp;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
int i;
DPRINTFN(5,(" : cue_attach: sc=%p, dev=%p", sc, dev));
devinfop = usbd_devinfo_alloc(dev, 0);
USB_ATTACH_SETUP;
printf("%s: %s\n", USBDEVNAME(sc->cue_dev), devinfop);
usbd_devinfo_free(devinfop);
err = usbd_set_config_no(dev, CUE_CONFIG_NO, 1);
if (err) {
printf("%s: setting config no failed\n",
USBDEVNAME(sc->cue_dev));
USB_ATTACH_ERROR_RETURN;
}
sc->cue_udev = dev;
sc->cue_product = uaa->product;
sc->cue_vendor = uaa->vendor;
usb_init_task(&sc->cue_tick_task, cue_tick_task, sc);
usb_init_task(&sc->cue_stop_task, (void (*)(void *))cue_stop, sc);
err = usbd_device2interface_handle(dev, CUE_IFACE_IDX, &iface);
if (err) {
printf("%s: getting interface handle failed\n",
USBDEVNAME(sc->cue_dev));
USB_ATTACH_ERROR_RETURN;
}
sc->cue_iface = iface;
id = usbd_get_interface_descriptor(iface);
/* Find endpoints. */
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
printf("%s: couldn't get ep %d\n",
USBDEVNAME(sc->cue_dev), i);
USB_ATTACH_ERROR_RETURN;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->cue_ed[CUE_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->cue_ed[CUE_ENDPT_TX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->cue_ed[CUE_ENDPT_INTR] = ed->bEndpointAddress;
}
}
#if 0
/* Reset the adapter. */
cue_reset(sc);
#endif
/*
* Get station address.
*/
cue_getmac(sc, &eaddr);
s = splnet();
/*
* A CATC chip was detected. Inform the world.
*/
printf("%s: Ethernet address %s\n", USBDEVNAME(sc->cue_dev),
ether_sprintf(eaddr));
/* Initialize interface info.*/
ifp = GET_IFP(sc);
ifp->if_softc = sc;
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = cue_ioctl;
ifp->if_start = cue_start;
ifp->if_watchdog = cue_watchdog;
#if defined(__OpenBSD__)
ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
#endif
strncpy(ifp->if_xname, USBDEVNAME(sc->cue_dev), IFNAMSIZ);
IFQ_SET_READY(&ifp->if_snd);
/* Attach the interface. */
if_attach(ifp);
Ether_ifattach(ifp, eaddr);
#if NRND > 0
rnd_attach_source(&sc->rnd_source, USBDEVNAME(sc->cue_dev),
RND_TYPE_NET, 0);
#endif
usb_callout_init(sc->cue_stat_ch);
sc->cue_attached = 1;
splx(s);
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->cue_udev,
USBDEV(sc->cue_dev));
USB_ATTACH_SUCCESS_RETURN;
}
USB_DETACH(cue)
{
USB_DETACH_START(cue, sc);
struct ifnet *ifp = GET_IFP(sc);
int s;
DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->cue_dev), __func__));
usb_uncallout(sc->cue_stat_ch, cue_tick, sc);
/*
* Remove any pending task. It cannot be executing because it run
* in the same thread as detach.
*/
usb_rem_task(sc->cue_udev, &sc->cue_tick_task);
usb_rem_task(sc->cue_udev, &sc->cue_stop_task);
if (!sc->cue_attached) {
/* Detached before attached finished, so just bail out. */
return (0);
}
s = splusb();
if (ifp->if_flags & IFF_RUNNING)
cue_stop(sc);
#if defined(__NetBSD__)
#if NRND > 0
rnd_detach_source(&sc->rnd_source);
#endif
ether_ifdetach(ifp);
#endif /* __NetBSD__ */
if_detach(ifp);
#ifdef DIAGNOSTIC
if (sc->cue_ep[CUE_ENDPT_TX] != NULL ||
sc->cue_ep[CUE_ENDPT_RX] != NULL ||
sc->cue_ep[CUE_ENDPT_INTR] != NULL)
printf("%s: detach has active endpoints\n",
USBDEVNAME(sc->cue_dev));
#endif
sc->cue_attached = 0;
splx(s);
usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->cue_udev,
USBDEV(sc->cue_dev));
return (0);
}
int
cue_activate(device_ptr_t self, enum devact act)
{
struct cue_softc *sc = (struct cue_softc *)self;
DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->cue_dev), __func__));
switch (act) {
case DVACT_ACTIVATE:
return (EOPNOTSUPP);
break;
case DVACT_DEACTIVATE:
/* Deactivate the interface. */
if_deactivate(&sc->cue_ec.ec_if);
sc->cue_dying = 1;
break;
}
return (0);
}
/*
* Initialize an RX descriptor and attach an MBUF cluster.
*/
Static int
cue_newbuf(struct cue_softc *sc, struct cue_chain *c, struct mbuf *m)
{
struct mbuf *m_new = NULL;
if (m == NULL) {
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
if (m_new == NULL) {
printf("%s: no memory for rx list "
"-- packet dropped!\n", USBDEVNAME(sc->cue_dev));
return (ENOBUFS);
}
MCLGET(m_new, M_DONTWAIT);
if (!(m_new->m_flags & M_EXT)) {
printf("%s: no memory for rx list "
"-- packet dropped!\n", USBDEVNAME(sc->cue_dev));
m_freem(m_new);
return (ENOBUFS);
}
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
} else {
m_new = m;
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
m_new->m_data = m_new->m_ext.ext_buf;
}
m_adj(m_new, ETHER_ALIGN);
c->cue_mbuf = m_new;
return (0);
}
Static int
cue_rx_list_init(struct cue_softc *sc)
{
struct cue_cdata *cd;
struct cue_chain *c;
int i;
cd = &sc->cue_cdata;
for (i = 0; i < CUE_RX_LIST_CNT; i++) {
c = &cd->cue_rx_chain[i];
c->cue_sc = sc;
c->cue_idx = i;
if (cue_newbuf(sc, c, NULL) == ENOBUFS)
return (ENOBUFS);
if (c->cue_xfer == NULL) {
c->cue_xfer = usbd_alloc_xfer(sc->cue_udev);
if (c->cue_xfer == NULL)
return (ENOBUFS);
c->cue_buf = usbd_alloc_buffer(c->cue_xfer, CUE_BUFSZ);
if (c->cue_buf == NULL) {
usbd_free_xfer(c->cue_xfer);
return (ENOBUFS);
}
}
}
return (0);
}
Static int
cue_tx_list_init(struct cue_softc *sc)
{
struct cue_cdata *cd;
struct cue_chain *c;
int i;
cd = &sc->cue_cdata;
for (i = 0; i < CUE_TX_LIST_CNT; i++) {
c = &cd->cue_tx_chain[i];
c->cue_sc = sc;
c->cue_idx = i;
c->cue_mbuf = NULL;
if (c->cue_xfer == NULL) {
c->cue_xfer = usbd_alloc_xfer(sc->cue_udev);
if (c->cue_xfer == NULL)
return (ENOBUFS);
c->cue_buf = usbd_alloc_buffer(c->cue_xfer, CUE_BUFSZ);
if (c->cue_buf == NULL) {
usbd_free_xfer(c->cue_xfer);
return (ENOBUFS);
}
}
}
return (0);
}
/*
* A frame has been uploaded: pass the resulting mbuf chain up to
* the higher level protocols.
*/
Static void
cue_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
{
struct cue_chain *c = priv;
struct cue_softc *sc = c->cue_sc;
struct ifnet *ifp = GET_IFP(sc);
struct mbuf *m;
int total_len = 0;
u_int16_t len;
int s;
DPRINTFN(10,("%s: %s: enter status=%d\n", USBDEVNAME(sc->cue_dev),
__func__, status));
if (sc->cue_dying)
return;
if (!(ifp->if_flags & IFF_RUNNING))
return;
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
return;
sc->cue_rx_errs++;
if (usbd_ratecheck(&sc->cue_rx_notice)) {
printf("%s: %u usb errors on rx: %s\n",
USBDEVNAME(sc->cue_dev), sc->cue_rx_errs,
usbd_errstr(status));
sc->cue_rx_errs = 0;
}
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sc->cue_ep[CUE_ENDPT_RX]);
goto done;
}
usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL);
memcpy(mtod(c->cue_mbuf, char *), c->cue_buf, total_len);
m = c->cue_mbuf;
len = UGETW(mtod(m, u_int8_t *));
/* No errors; receive the packet. */
total_len = len;
if (len < sizeof(struct ether_header)) {
ifp->if_ierrors++;
goto done;
}
ifp->if_ipackets++;
m_adj(m, sizeof(u_int16_t));
m->m_pkthdr.len = m->m_len = total_len;
m->m_pkthdr.rcvif = ifp;
s = splnet();
/* XXX ugly */
if (cue_newbuf(sc, c, NULL) == ENOBUFS) {
ifp->if_ierrors++;
goto done1;
}
#if NBPFILTER > 0
/*
* Handle BPF listeners. Let the BPF user see the packet, but
* don't pass it up to the ether_input() layer unless it's
* a broadcast packet, multicast packet, matches our ethernet
* address or the interface is in promiscuous mode.
*/
if (ifp->if_bpf)
BPF_MTAP(ifp, m);
#endif
DPRINTFN(10,("%s: %s: deliver %d\n", USBDEVNAME(sc->cue_dev),
__func__, m->m_len));
IF_INPUT(ifp, m);
done1:
splx(s);
done:
/* Setup new transfer. */
usbd_setup_xfer(c->cue_xfer, sc->cue_ep[CUE_ENDPT_RX],
c, c->cue_buf, CUE_BUFSZ, USBD_SHORT_XFER_OK | USBD_NO_COPY,
USBD_NO_TIMEOUT, cue_rxeof);
usbd_transfer(c->cue_xfer);
DPRINTFN(10,("%s: %s: start rx\n", USBDEVNAME(sc->cue_dev),
__func__));
}
/*
* A frame was downloaded to the chip. It's safe for us to clean up
* the list buffers.
*/
Static void
cue_txeof(usbd_xfer_handle xfer, usbd_private_handle priv,
usbd_status status)
{
struct cue_chain *c = priv;
struct cue_softc *sc = c->cue_sc;
struct ifnet *ifp = GET_IFP(sc);
int s;
if (sc->cue_dying)
return;
s = splnet();
DPRINTFN(10,("%s: %s: enter status=%d\n", USBDEVNAME(sc->cue_dev),
__func__, status));
ifp->if_timer = 0;
ifp->if_flags &= ~IFF_OACTIVE;
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) {
splx(s);
return;
}
ifp->if_oerrors++;
printf("%s: usb error on tx: %s\n", USBDEVNAME(sc->cue_dev),
usbd_errstr(status));
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sc->cue_ep[CUE_ENDPT_TX]);
splx(s);
return;
}
ifp->if_opackets++;
m_freem(c->cue_mbuf);
c->cue_mbuf = NULL;
if (IFQ_IS_EMPTY(&ifp->if_snd) == 0)
cue_start(ifp);
splx(s);
}
Static void
cue_tick(void *xsc)
{
struct cue_softc *sc = xsc;
if (sc == NULL)
return;
if (sc->cue_dying)
return;
DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->cue_dev), __func__));
/* Perform statistics update in process context. */
usb_add_task(sc->cue_udev, &sc->cue_tick_task, USB_TASKQ_DRIVER);
}
Static void
cue_tick_task(void *xsc)
{
struct cue_softc *sc = xsc;
struct ifnet *ifp;
if (sc->cue_dying)
return;
DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->cue_dev), __func__));
ifp = GET_IFP(sc);
ifp->if_collisions += cue_csr_read_2(sc, CUE_TX_SINGLECOLL);
ifp->if_collisions += cue_csr_read_2(sc, CUE_TX_MULTICOLL);
ifp->if_collisions += cue_csr_read_2(sc, CUE_TX_EXCESSCOLL);
if (cue_csr_read_2(sc, CUE_RX_FRAMEERR))
ifp->if_ierrors++;
}
Static int
cue_send(struct cue_softc *sc, struct mbuf *m, int idx)
{
int total_len;
struct cue_chain *c;
usbd_status err;
c = &sc->cue_cdata.cue_tx_chain[idx];
/*
* Copy the mbuf data into a contiguous buffer, leaving two
* bytes at the beginning to hold the frame length.
*/
m_copydata(m, 0, m->m_pkthdr.len, c->cue_buf + 2);
c->cue_mbuf = m;
total_len = m->m_pkthdr.len + 2;
DPRINTFN(10,("%s: %s: total_len=%d\n",
USBDEVNAME(sc->cue_dev), __func__, total_len));
/* The first two bytes are the frame length */
c->cue_buf[0] = (u_int8_t)m->m_pkthdr.len;
c->cue_buf[1] = (u_int8_t)(m->m_pkthdr.len >> 8);
/* XXX 10000 */
usbd_setup_xfer(c->cue_xfer, sc->cue_ep[CUE_ENDPT_TX],
c, c->cue_buf, total_len, USBD_NO_COPY, 10000, cue_txeof);
/* Transmit */
err = usbd_transfer(c->cue_xfer);
if (err != USBD_IN_PROGRESS) {
printf("%s: cue_send error=%s\n", USBDEVNAME(sc->cue_dev),
usbd_errstr(err));
/* Stop the interface from process context. */
usb_add_task(sc->cue_udev, &sc->cue_stop_task,
USB_TASKQ_DRIVER);
return (EIO);
}
sc->cue_cdata.cue_tx_cnt++;
return (0);
}
Static void
cue_start(struct ifnet *ifp)
{
struct cue_softc *sc = ifp->if_softc;
struct mbuf *m_head = NULL;
if (sc->cue_dying)
return;
DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->cue_dev),__func__));
if (ifp->if_flags & IFF_OACTIVE)
return;
IFQ_POLL(&ifp->if_snd, m_head);
if (m_head == NULL)
return;
if (cue_send(sc, m_head, 0)) {
ifp->if_flags |= IFF_OACTIVE;
return;
}
IFQ_DEQUEUE(&ifp->if_snd, m_head);
#if NBPFILTER > 0
/*
* If there's a BPF listener, bounce a copy of this frame
* to him.
*/
if (ifp->if_bpf)
BPF_MTAP(ifp, m_head);
#endif
ifp->if_flags |= IFF_OACTIVE;
/*
* Set a timeout in case the chip goes out to lunch.
*/
ifp->if_timer = 5;
}
Static void
cue_init(void *xsc)
{
struct cue_softc *sc = xsc;
struct ifnet *ifp = GET_IFP(sc);
int i, s, ctl;
u_char *eaddr;
if (sc->cue_dying)
return;
DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->cue_dev),__func__));
if (ifp->if_flags & IFF_RUNNING)
return;
s = splnet();
/*
* Cancel pending I/O and free all RX/TX buffers.
*/
#if 1
cue_reset(sc);
#endif
/* Set advanced operation modes. */
cue_csr_write_1(sc, CUE_ADVANCED_OPMODES,
CUE_AOP_EMBED_RXLEN | 0x03); /* 1 wait state */
#if defined(__OpenBSD__)
eaddr = sc->arpcom.ac_enaddr;
#elif defined(__NetBSD__)
eaddr = LLADDR(ifp->if_sadl);
#endif
/* Set MAC address */
for (i = 0; i < ETHER_ADDR_LEN; i++)
cue_csr_write_1(sc, CUE_PAR0 - i, eaddr[i]);
/* Enable RX logic. */
ctl = CUE_ETHCTL_RX_ON | CUE_ETHCTL_MCAST_ON;
if (ifp->if_flags & IFF_PROMISC)
ctl |= CUE_ETHCTL_PROMISC;
cue_csr_write_1(sc, CUE_ETHCTL, ctl);
/* Init TX ring. */
if (cue_tx_list_init(sc) == ENOBUFS) {
printf("%s: tx list init failed\n", USBDEVNAME(sc->cue_dev));
splx(s);
return;
}
/* Init RX ring. */
if (cue_rx_list_init(sc) == ENOBUFS) {
printf("%s: rx list init failed\n", USBDEVNAME(sc->cue_dev));
splx(s);
return;
}
/* Load the multicast filter. */
cue_setmulti(sc);
/*
* Set the number of RX and TX buffers that we want
* to reserve inside the ASIC.
*/
cue_csr_write_1(sc, CUE_RX_BUFPKTS, CUE_RX_FRAMES);
cue_csr_write_1(sc, CUE_TX_BUFPKTS, CUE_TX_FRAMES);
/* Set advanced operation modes. */
cue_csr_write_1(sc, CUE_ADVANCED_OPMODES,
CUE_AOP_EMBED_RXLEN | 0x01); /* 1 wait state */
/* Program the LED operation. */
cue_csr_write_1(sc, CUE_LEDCTL, CUE_LEDCTL_FOLLOW_LINK);
if (sc->cue_ep[CUE_ENDPT_RX] == NULL) {
if (cue_open_pipes(sc)) {
splx(s);
return;
}
}
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
splx(s);
usb_callout(sc->cue_stat_ch, hz, cue_tick, sc);
}
Static int
cue_open_pipes(struct cue_softc *sc)
{
struct cue_chain *c;
usbd_status err;
int i;
/* Open RX and TX pipes. */
err = usbd_open_pipe(sc->cue_iface, sc->cue_ed[CUE_ENDPT_RX],
USBD_EXCLUSIVE_USE, &sc->cue_ep[CUE_ENDPT_RX]);
if (err) {
printf("%s: open rx pipe failed: %s\n",
USBDEVNAME(sc->cue_dev), usbd_errstr(err));
return (EIO);
}
err = usbd_open_pipe(sc->cue_iface, sc->cue_ed[CUE_ENDPT_TX],
USBD_EXCLUSIVE_USE, &sc->cue_ep[CUE_ENDPT_TX]);
if (err) {
printf("%s: open tx pipe failed: %s\n",
USBDEVNAME(sc->cue_dev), usbd_errstr(err));
return (EIO);
}
/* Start up the receive pipe. */
for (i = 0; i < CUE_RX_LIST_CNT; i++) {
c = &sc->cue_cdata.cue_rx_chain[i];
usbd_setup_xfer(c->cue_xfer, sc->cue_ep[CUE_ENDPT_RX],
c, c->cue_buf, CUE_BUFSZ,
USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT,
cue_rxeof);
usbd_transfer(c->cue_xfer);
}
return (0);
}
Static int
cue_ioctl(struct ifnet *ifp, u_long command, void *data)
{
struct cue_softc *sc = ifp->if_softc;
struct ifaddr *ifa = (struct ifaddr *)data;
struct ifreq *ifr = (struct ifreq *)data;
int s, error = 0;
if (sc->cue_dying)
return (EIO);
s = splnet();
switch(command) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
cue_init(sc);
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
#if defined(__NetBSD__)
arp_ifinit(ifp, ifa);
#else
arp_ifinit(&sc->arpcom, ifa);
#endif
break;
#endif /* INET */
}
break;
case SIOCSIFMTU:
if (ifr->ifr_mtu > ETHERMTU)
error = EINVAL;
else
ifp->if_mtu = ifr->ifr_mtu;
break;
case SIOCSIFFLAGS:
if (ifp->if_flags & IFF_UP) {
if (ifp->if_flags & IFF_RUNNING &&
ifp->if_flags & IFF_PROMISC &&
!(sc->cue_if_flags & IFF_PROMISC)) {
CUE_SETBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
cue_setmulti(sc);
} else if (ifp->if_flags & IFF_RUNNING &&
!(ifp->if_flags & IFF_PROMISC) &&
sc->cue_if_flags & IFF_PROMISC) {
CUE_CLRBIT(sc, CUE_ETHCTL, CUE_ETHCTL_PROMISC);
cue_setmulti(sc);
} else if (!(ifp->if_flags & IFF_RUNNING))
cue_init(sc);
} else {
if (ifp->if_flags & IFF_RUNNING)
cue_stop(sc);
}
sc->cue_if_flags = ifp->if_flags;
error = 0;
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
cue_setmulti(sc);
error = 0;
break;
default:
error = EINVAL;
break;
}
splx(s);
return (error);
}
Static void
cue_watchdog(struct ifnet *ifp)
{
struct cue_softc *sc = ifp->if_softc;
struct cue_chain *c;
usbd_status stat;
int s;
DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->cue_dev),__func__));
if (sc->cue_dying)
return;
ifp->if_oerrors++;
printf("%s: watchdog timeout\n", USBDEVNAME(sc->cue_dev));
s = splusb();
c = &sc->cue_cdata.cue_tx_chain[0];
usbd_get_xfer_status(c->cue_xfer, NULL, NULL, NULL, &stat);
cue_txeof(c->cue_xfer, c, stat);
if (IFQ_IS_EMPTY(&ifp->if_snd) == 0)
cue_start(ifp);
splx(s);
}
/*
* Stop the adapter and free any mbufs allocated to the
* RX and TX lists.
*/
Static void
cue_stop(struct cue_softc *sc)
{
usbd_status err;
struct ifnet *ifp;
int i;
DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->cue_dev),__func__));
ifp = GET_IFP(sc);
ifp->if_timer = 0;
cue_csr_write_1(sc, CUE_ETHCTL, 0);
cue_reset(sc);
usb_uncallout(sc->cue_stat_ch, cue_tick, sc);
/* Stop transfers. */
if (sc->cue_ep[CUE_ENDPT_RX] != NULL) {
err = usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_RX]);
if (err) {
printf("%s: abort rx pipe failed: %s\n",
USBDEVNAME(sc->cue_dev), usbd_errstr(err));
}
err = usbd_close_pipe(sc->cue_ep[CUE_ENDPT_RX]);
if (err) {
printf("%s: close rx pipe failed: %s\n",
USBDEVNAME(sc->cue_dev), usbd_errstr(err));
}
sc->cue_ep[CUE_ENDPT_RX] = NULL;
}
if (sc->cue_ep[CUE_ENDPT_TX] != NULL) {
err = usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_TX]);
if (err) {
printf("%s: abort tx pipe failed: %s\n",
USBDEVNAME(sc->cue_dev), usbd_errstr(err));
}
err = usbd_close_pipe(sc->cue_ep[CUE_ENDPT_TX]);
if (err) {
printf("%s: close tx pipe failed: %s\n",
USBDEVNAME(sc->cue_dev), usbd_errstr(err));
}
sc->cue_ep[CUE_ENDPT_TX] = NULL;
}
if (sc->cue_ep[CUE_ENDPT_INTR] != NULL) {
err = usbd_abort_pipe(sc->cue_ep[CUE_ENDPT_INTR]);
if (err) {
printf("%s: abort intr pipe failed: %s\n",
USBDEVNAME(sc->cue_dev), usbd_errstr(err));
}
err = usbd_close_pipe(sc->cue_ep[CUE_ENDPT_INTR]);
if (err) {
printf("%s: close intr pipe failed: %s\n",
USBDEVNAME(sc->cue_dev), usbd_errstr(err));
}
sc->cue_ep[CUE_ENDPT_INTR] = NULL;
}
/* Free RX resources. */
for (i = 0; i < CUE_RX_LIST_CNT; i++) {
if (sc->cue_cdata.cue_rx_chain[i].cue_mbuf != NULL) {
m_freem(sc->cue_cdata.cue_rx_chain[i].cue_mbuf);
sc->cue_cdata.cue_rx_chain[i].cue_mbuf = NULL;
}
if (sc->cue_cdata.cue_rx_chain[i].cue_xfer != NULL) {
usbd_free_xfer(sc->cue_cdata.cue_rx_chain[i].cue_xfer);
sc->cue_cdata.cue_rx_chain[i].cue_xfer = NULL;
}
}
/* Free TX resources. */
for (i = 0; i < CUE_TX_LIST_CNT; i++) {
if (sc->cue_cdata.cue_tx_chain[i].cue_mbuf != NULL) {
m_freem(sc->cue_cdata.cue_tx_chain[i].cue_mbuf);
sc->cue_cdata.cue_tx_chain[i].cue_mbuf = NULL;
}
if (sc->cue_cdata.cue_tx_chain[i].cue_xfer != NULL) {
usbd_free_xfer(sc->cue_cdata.cue_tx_chain[i].cue_xfer);
sc->cue_cdata.cue_tx_chain[i].cue_xfer = NULL;
}
}
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
}