NetBSD/sys/dev/mca/espreg.h
jdolecek 7a12ca98ab Make this NCR 53C90 driver work, using the chip information from
Tymm Twillman's Linux mca_53c9x driver.
Tested with external ZIP100 only.
2001-12-04 20:47:58 +00:00

78 lines
3.4 KiB
C

/* $NetBSD: espreg.h,v 1.1 2001/12/04 20:47:58 jdolecek Exp $ */
/*-
* Copyright (c) 1997, 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jaromir Dolecek.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* MCA NCR 53C90 86C01 DMA controller registers.
*
* Information got from Tymm Twillman <tymm@computer.org>'s
* Linux MCA NC53c90 driver drivers/scsi/mca_53c9x.c.
*/
#define N86C01_CARDID_LOW 0x00 /* CardId, lower byte */
#define N86C01_CARDID_HIGH 0x01 /* CardId, high byte */
#define N86C01_MODE_ENABLE 0x02 /* Mode enable register */
#define N86C01_DATA_WIDTH 0x80 /* data width - 1=16 0=8 */
#define N86C01_INTR_ENABLE 0x40 /* enable inrerrupts 1=enable*/
#define N86C01_INTR_SELECT_MSK 0x30 /* IRQ select - see ADF */
#define N86C01_IOADDR_MSK 0x0e /* Base Address - see ADF */
#define N86C01_CARD_ENABLE 0x01 /* Card enable - 1=enabled */
#define N86C01_DMA_CTRL 0x03 /* DMA control */
#define N86C01_DMA_ENABLE 0x80 /* DMA enable - 1=enabled */
#define N86C01_PREEMPT_CNT_MSK 0x60
/* Preemt Count Select - number of transfers to complete after
* the chip is preempted on MCA bus
* 0 0 = 0
* 0 1 = 1
* 1 0 = 3
* 1 1 = 7
*/
#define N86C01_FAIRNESS_EN 0x10 /* Fairness enable 1=enable */
#define N86C01_DMA_ARB_MSK 0x0f /* DMA Arbitration lvl */
#define N86C01_GENERAL 0x04 /* General purpose register */
/* Bits 7,6 apply to SCSI Id selection in ADF, 5-3 user definable, 2-0 reserv*/
#define N86C01_PIO 0x0a /* IO-based DMA, PIO */
#define N86C01_STATUS 0x0c /* Status */
#define N86C01_DMA_PEND 0x02 /* DMA pending 1=pending */
#define N86C01_IRQ_PEND 0x01 /* IRQ pending 0=pending */