NetBSD/sys/arch/sun3/conf/GENERIC

223 lines
6.6 KiB
Plaintext

# $NetBSD: GENERIC,v 1.77 2001/02/22 07:11:08 chs Exp $
# GENERIC Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E)
# Supports root on: ie0, le0, sd*, ...
include "arch/sun3/conf/std.sun3"
#ident "GENERIC-$Revision: 1.77 $"
# Machines to be supported by this kernel
options FPU_EMULATE
options HAVECACHE # Sun3/260 VAC
# Needs to be set per system. i.e change these as you see fit
maxusers 4
# Standard system options
options KTRACE # system call tracing
options SYSVMSG # System V message queues
options SYSVSEM # System V semaphores
options SYSVSHM # System V shared memory
#options SHMMAXPGS=1024 # 1024 pages is the default
options LKM # loadable kernel modules
#options INSECURE # disable kernel security level
#options UCONSOLE # Allow non-root TIOCCONS
# Which kernel debugger? Uncomment either this:
options DDB
# ... or these for KGDB (gdb remote target)
#makeoptions DEBUG="-g" # debugging symbols for gdb
#options KGDB
#options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01
# Other debugging options
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
#options DEBUG # kernel debugging code
#options DIAGNOSTIC # extra kernel sanity checking
#options KMEMSTATS # kernel memory statistics (vmstat -m)
#options PMAP_DEBUG
#options SCSIDEBUG
#options SCSIVERBOSE # Verbose SCSI errors
# Compatability options
options COMPAT_SUNOS # can run SunOS 4.1.1 executables
#options COMPAT_SVR4 # can run SVR4 executables
options COMPAT_43 # and 4.3BSD and ...
options COMPAT_10 # NetBSD 1.0
options COMPAT_11 # NetBSD 1.1
options COMPAT_12 # NetBSD 1.2
options COMPAT_13 # NetBSD 1.3
options COMPAT_14 # NetBSD 1.4
options COMPAT_AOUT_M68K # support for NetBSD a.out executables
#options COMPAT_LINUX # can run Linux/m68k executables
options EXEC_AOUT # support for a.out executables
# Filesystem options
file-system FFS # Berkeley Fast Filesystem
file-system NFS # Sun NFS client support
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system FDESC # /dev/fd/*
file-system KERNFS # /kern
file-system NULLFS # loopback file system
file-system OVERLAY # overlay file system
file-system PROCFS # /proc
file-system UNION # union file system
file-system MFS # memory-based filesystem
options NFSSERVER # nfs server support
options QUOTA # FFS quotas
#options FFS_EI # FFS Endian Independant support
options SOFTDEP # FFS soft updates support.
# Networking options
options INET # IP prototol stack support
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
#options GATEWAY # IP packet forwarding
#options ISO,TPIP # OSI networking
#options EON # OSI tunneling over IP
#options CCITT,LLC,HDLC # X.25
options PFIL_HOOKS # pfil(9) packet filter hooks.
# Work-around for root on slow servers (insurance...)
options NFS_BOOT_RWSIZE=1024
options NFS_BOOT_BOOTPARAM
config netbsd root on ? type ?
# On-board I/O space (required)
include "arch/sun3/conf/obio.sun3"
# On-board memory (optional)
# See frame-buffers
obmem0 at mainbus?
# VME bus support (optional)
# One unit for each address space
vme0 at mainbus? # A16/D16
vme1 at mainbus? # A16/D32
vme2 at mainbus? # A24/D16
vme3 at mainbus? # A24/D32
vme4 at mainbus? # A32/D16
vme5 at mainbus? # A32/D32
#
# Serial ports
#
zstty0 at zsc1 channel 0 # ttya
zstty1 at zsc1 channel 1 # ttyb
kbd0 at zsc0 channel 0 # keyboard
ms0 at zsc0 channel 1 # mouse
#
# Network devices
#
# Intel Ethernet (onboard, or VME)
ie0 at obio0 addr 0x0C0000 ipl 3
ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
# Lance Ethernet (only onboard)
le0 at obio0 addr 0x120000 ipl 3
# All Sun3 machines with an "le" (3/50, 3/60) should be
# presumed to have the old, buggy LANCE chip. (Rev. C)
options LANCE_REVC_BUG
#
# Disk and tape devices
#
# Sun3 "si" SCSI controller (NCR 5380)
# This driver has several flags which may be enabled using
# the "flags" directive. Valid flags are:
#
# 0x000ff Set (1<<target) to disable disconnect/reselect
# 0x0ff00 Set (1<<(target+8)) to disable parity checking
# 0x10000 Set this bit to disable DMA interrupts (poll)
# 0x20000 Set this bit to disable DMA entirely (use PIO)
#
# For example: "flags 0x1000f" would disable DMA interrupts,
# and disable disconnect/reselect for targets 0-3
si0 at obio0 addr 0x140000 ipl 2
si0 at vme2 addr 0x200000 ipl 2 vect 0x40
si1 at vme2 addr 0x204000 ipl 2 vect 0x41
# Xylogics 450/451 controllers (VME A16/D16)
xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
xy* at xyc? drive ?
# Xylogics 7053 controllers (VME A16/D32)
xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
xd* at xdc? drive ?
# Xylogics 472 tape controllers?
# Sun3/E SCSI+Ethernet board (VME A24/D16)
# Note: the board uses vect and vect+1
sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75
sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77
si* at sebuf?
ie* at sebuf?
#
# Frame buffer devices
#
include "arch/sun3/conf/bw2.sun3"
include "arch/sun3/conf/cg4.sun3"
# 3/60 P4 accelerated 8-bit color frame buffer
# cgsix0 at obmem0 addr 0xff000000
# 3/60 P4 24-bit color frame buffer
# cgeight0 at obmem0 addr 0xff300000
# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8
# Support for the CG9 24-bit frame buffer (VME A32/D32).
# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA
#
# SCSI infrastructure
#
scsibus* at scsi?
sd* at scsibus? target ? lun ? # SCSI disks
st* at scsibus? target ? lun ? # SCSI tapes
cd* at scsibus? target ? lun ? # SCSI CD-ROMs
ch* at scsibus? target ? lun ? # SCSI changer devices
ss* at scsibus? target ? lun ? # SCSI scanners
uk* at scsibus? target ? lun ? # unknown SCSI devices
# Memory-disk drivers
pseudo-device md 2
# Misc.
pseudo-device loop 1 # network loopback
pseudo-device bpfilter 8 # packet filter
pseudo-device sl 2 # CSLIP
pseudo-device ppp 2 # PPP
pseudo-device tun 2 # network tunneling over tty
#pseudo-device gre 2 # generic L3 over IP tunnel
#pseudo-device ipfilter # ip filter
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
pseudo-device vlan # IEEE 802.1q encapsulation
pseudo-device rnd # /dev/random and in-kernel generator
pseudo-device pty # pseudo-terminals
pseudo-device vnd 4 # paging to files
#pseudo-device ccd 4 # concatenated disks
#pseudo-device raid 4 # RAIDframe disk driver
#options RAID_AUTOCONFIG # auto-configuration of RAID components