NetBSD/sys/arch/atari/include/iomap.h
1996-08-23 11:17:00 +00:00

94 lines
3.8 KiB
C

/* $NetBSD: iomap.h,v 1.3 1996/08/23 11:17:00 leo Exp $ */
/*
* Copyright (c) 1995 Leo Weppelman.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Leo Weppelman.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _MACHINE_IOMAP_H
#define _MACHINE_IOMAP_H
/*
* Atari TT hardware:
* I/O Address maps
*/
#ifdef _KERNEL
vm_offset_t stio_addr; /* Where the st io-area is mapped */
#define AD_STIO (stio_addr) /* .. see atari_init.c */
/*
* PCI KVA addresses. These are determined in atari_init.c. Exept for
* the config-space, they should be used for a PCI-console only. Other
* cards should use the bus-functions to map io & mem spaces.
* Each card gets an config area of NBPG bytes.
*/
vm_offset_t pci_conf_addr; /* KVA base of PCI config space */
vm_offset_t pci_io_addr; /* KVA base of PCI io-space */
vm_offset_t pci_mem_addr; /* KVA base of PCI mem-space */
#endif /* _KERNEL */
#define PCI_CONFB_PHYS (0xA0000000L)
#define PCI_CONFM_PHYS (0x00080000L)
#define PCI_IO_PHYS (0xB0000000L)
#define PCI_MEM_PHYS (0x80000000L)
#define PCI_CONF_SIZE (4 * NBPG)
#define PCI_IO_SIZE (NBPG)
#define PCI_MEM_SIZE (32 * 1024)
#define AD_RAM (0x000000L) /* main memory */
#define AD_CART (0xFA0000L) /* expansion cartridge */
#define AD_ROM (0xFC0000L) /* system ROM */
#define STIO_SIZE (0x8000L) /* Size of mapped I/O devices */
/*
* Physical address of I/O area. Use only for pte initialisation!
*/
#define STIO_PHYS ((machineid & ATARI_HADES) \
? 0xffff8000L \
: 0x00ff8000L)
/*
* I/O addresses in the STIO area:
*/
#define AD_RAMCFG (AD_STIO + 0x0000) /* ram configuration */
#define AD_FAL_MON_TYPE (AD_STIO + 0x0006) /* Falcon monitor type */
#define AD_VIDEO (AD_STIO + 0x0200) /* video controller */
#define AD_RESERVED (AD_STIO + 0x0400) /* reserved */
#define AD_DMA (AD_STIO + 0x0600) /* DMA device access */
#define AD_SCSI_DMA (AD_STIO + 0x0700) /* SCSI DMA registers */
#define AD_NCR5380 (AD_STIO + 0x0780) /* SCSI controller */
#define AD_SOUND (AD_STIO + 0x0800) /* YM-2149 */
#define AD_RTC (AD_STIO + 0x0960) /* TT realtime clock */
#define AD_SCC (AD_STIO + 0x0C80) /* SCC 8530 */
#define AD_SCU (AD_STIO + 0x0E00) /* System Control Unit */
#define AD_MFP (AD_STIO + 0x7A00) /* 68901 */
#define AD_MFP2 (AD_STIO + 0x7A80) /* 68901-TT */
#define AD_ACIA (AD_STIO + 0x7C00) /* 2 * 6850 */
#endif /* _MACHINE_IOMAP_H */