NetBSD/usr.bin/rfcomm_sppd/rfcomm_sppd.1

227 lines
6.6 KiB
Groff

.\" $NetBSD: rfcomm_sppd.1,v 1.13 2017/12/21 08:59:27 plunky Exp $
.\"
.\" Copyright (c) 2006 Itronix Inc.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. The name of Itronix Inc. may not be used to endorse
.\" or promote products derived from this software without specific
.\" prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY ITRONIX INC. ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ITRONIX INC. BE LIABLE FOR ANY
.\" DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
.\" (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
.\" ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.\"
.\" Copyright (c) 2001-2003 Maksim Yevmenkin <m_evmenkin@yahoo.com>
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.Dd November 2, 2010
.Dt RFCOMM_SPPD 1
.Os
.Sh NAME
.Nm rfcomm_sppd
.Nd RFCOMM Serial Port Profile daemon
.Sh SYNOPSIS
.Nm
.Op Fl d Ar device
.Op Fl m Ar mode
.Op Fl p Ar psm
.Op Fl s Ar service
.Op Fl t Ar tty
.Brq Fl a Ar address | Op Fl c Ar channel
.Sh DESCRIPTION
The
.Nm
utility is a Serial Port Profile daemon, providing serial access over
an RFCOMM connection to a remote device.
.Nm
can work in client or server mode.
.Pp
In client mode,
.Nm
initiates an RFCOMM connection to the
.Ar service
at the remote
.Ar address .
.Pp
In server mode,
.Nm
registers the
.Ar service
with the local SDP server and listens on the specified RFCOMM
.Ar channel
for an incoming connection, or the first unused channel if none
was given.
.Pp
The options are as follows:
.Bl -tag -width ".Fl c Ar channel"
.It Fl a Ar address
Client mode.
Specify the address of the remote RFCOMM device.
The address can be specified as BD_ADDR or name.
If given as a name, then the
.Nm
utility will attempt to resolve the name via
.Xr bt_gethostbyname 3 .
.It Fl c Ar channel
In server mode, specify the RFCOMM channel number to listen on.
.Nm
will register the service with the local
.Xr sdpd 8
daemon.
Note that registering services with
.Xr sdpd 8
is a privileged operation.
.It Fl d Ar device
Use the local device with the specified address.
The device can be specified by BD_ADDR or device name.
See
.Xr btconfig 8
for a list of available devices.
If no
.Ar device
is specified, the connection will be set up on a system determined device.
.It Fl m Ar mode
Set connection link mode.
Supported modes are:
.Pp
.Bl -tag -compact -width encrypt -offset xx
.It auth
require devices be paired.
.It encrypt
auth, plus enable encryption.
.It secure
encryption, plus change of link key.
.El
.It Fl p Ar psm
Specify the
.Qq Protocol/Service Multiplexer
value to be used for the RFCOMM protocol.
In client mode where Service Discovery is being used, this value
will be ignored.
.It Fl s Ar service
Name of service class to connect to or register.
If no
.Ar service
is given, the default
.Qq Serial Port
service class will be used.
Known service classes are:
.Pp
.Bl -tag -compact -width DUN -offset xx
.It DUN
Dialup Networking
.It LAN
LAN access using PPP
.It SP
Serial Port
.El
.Pp
In client mode, the service class may be given as a channel number, for instances
where the remote device does not provide Service Discovery.
.It Fl t Ar tty
Slave pseudo tty name.
If this option is given,
.Nm
will detach from the controlling process after the Bluetooth connection is
made, and operate over the named
.Xr pty 4
pair.
Otherwise, stdin/stdout will be used.
.El
.Sh FILES
.Bl -tag -width ".Pa /dev/tty[p-sP-S][0-9a-v]" -compact
.It Pa /dev/pty[p-sP-S][0-9a-v]
master pseudo terminals
.It Pa /dev/tty[p-sP-S][0-9a-v]
slave pseudo terminals
.El
.Sh EXIT STATUS
.Ex -std
.Sh EXAMPLES
.Dl rfcomm_sppd -a 00:01:02:03:04:05 -s 1 -t /dev/ttyp1
.Pp
Will open an RFCOMM connection to the server at
.Li 00:01:02:03:04:05
on channel
.Li 1 .
Once the connection has been established,
.Nm
will detach and
.Pa /dev/ttyp1
can be used to communicate with the remote serial port on the
server, e.g. with the use of
.Pp
.Dl cu -l /dev/ttyp1
.Pp
In order to use
.Nm
to automatically create a secured link for
.Xr pppd 8 ,
use
.Dl pty Qo rfcomm_sppd -a 00:01:02:03:04:05 -s DUN -m secure Qc
.Pp
in your
.Xr pppd 8
configuration file.
.Sh SEE ALSO
.Xr bluetooth 3 ,
.Xr bluetooth 4 ,
.Xr pty 4 ,
.Xr btconfig 8 ,
.Xr pppd 8 ,
.Xr sdpd 8
.Sh HISTORY
The
.Nm
program first appeared in
.Fx
and was ported to
.Nx 4.0
by
.An Iain Hibbert
under the sponsorship of
.An Itronix, Inc .
.Sh AUTHORS
.An Maksim Yevmenkin Aq Mt m_evmenkin@yahoo.com ,
.An Iain Hibbert
.Sh BUGS
Please report if found.