470 lines
10 KiB
C
470 lines
10 KiB
C
/* $NetBSD: asc.c,v 1.10 1996/08/28 18:59:51 cgd Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1996 Mark Brinicombe
|
|
* Copyright (c) 1982, 1990 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from:ahsc.c
|
|
*/
|
|
|
|
/*
|
|
* Ok this driver is not wonderful yet. It only supports POLLING mode
|
|
* The Acorn SCSI card (or any WD3393 based card) does not support
|
|
* DMA so the DMA section of this driver and the sbic driver needs
|
|
* to be rewritten.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/device.h>
|
|
#include <scsi/scsi_all.h>
|
|
#include <scsi/scsiconf.h>
|
|
#include <machine/io.h>
|
|
#include <machine/irqhandler.h>
|
|
#include <machine/katelib.h>
|
|
#include <arm32/podulebus/podulebus.h>
|
|
#include <arm32/podulebus/sbicreg.h>
|
|
#include <arm32/podulebus/sbicvar.h>
|
|
#include <arm32/podulebus/ascreg.h>
|
|
#include <arm32/podulebus/ascvar.h>
|
|
|
|
void ascattach __P((struct device *, struct device *, void *));
|
|
int ascmatch __P((struct device *, void *, void *));
|
|
|
|
void asc_enintr __P((struct sbic_softc *));
|
|
void asc_dmastop __P((struct sbic_softc *));
|
|
int asc_dmanext __P((struct sbic_softc *));
|
|
int asc_dmaintr __P((struct sbic_softc *));
|
|
int asc_dmago __P((struct sbic_softc *, char *, int, int));
|
|
int asc_scsicmd __P((struct scsi_xfer *xs));
|
|
int asc_intr __P((struct asc_softc *));
|
|
|
|
struct scsi_adapter asc_scsiswitch = {
|
|
asc_scsicmd,
|
|
sbic_minphys,
|
|
0, /* no lun support */
|
|
0, /* no lun support */
|
|
};
|
|
|
|
struct scsi_device asc_scsidev = {
|
|
NULL, /* use default error handler */
|
|
NULL, /* do not have a start functio */
|
|
NULL, /* have no async handler */
|
|
NULL, /* Use default done routine */
|
|
};
|
|
|
|
|
|
#ifdef DEBUG
|
|
int asc_dmadebug = 0;
|
|
#endif
|
|
|
|
struct cfattach asc_ca = {
|
|
sizeof(struct asc_softc), ascmatch, ascattach
|
|
};
|
|
|
|
struct cfdriver asc_cd = {
|
|
NULL, "asc", DV_DULL, NULL, 0
|
|
};
|
|
|
|
u_long scsi_nosync;
|
|
int shift_nosync;
|
|
|
|
#if ASC_POLL > 0
|
|
int asc_poll = 1;
|
|
|
|
extern char *boot_args;
|
|
#endif
|
|
|
|
int
|
|
ascmatch(pdp, match, auxp)
|
|
struct device *pdp;
|
|
void *match, *auxp;
|
|
{
|
|
struct podule_attach_args *pa = (struct podule_attach_args *)auxp;
|
|
|
|
/* Look for the card */
|
|
|
|
if (matchpodule(pa, 0x00, 0x02, -1) == 0)
|
|
return(0);
|
|
|
|
return(1);
|
|
}
|
|
|
|
void
|
|
ascattach(pdp, dp, auxp)
|
|
struct device *pdp, *dp;
|
|
void *auxp;
|
|
{
|
|
/* volatile struct sdmac *rp;*/
|
|
struct asc_softc *sc;
|
|
struct sbic_softc *sbic;
|
|
struct podule_attach_args *pa;
|
|
|
|
sc = (struct asc_softc *)dp;
|
|
pa = (struct podule_attach_args *)auxp;
|
|
|
|
if (pa->pa_podule_number == -1)
|
|
panic("Podule has disappeared !");
|
|
|
|
sc->sc_podule_number = pa->pa_podule_number;
|
|
sc->sc_podule = pa->pa_podule;
|
|
podules[sc->sc_podule_number].attached = 1;
|
|
|
|
#if ASC_POLL > 0
|
|
if (boot_args) {
|
|
char *ptr;
|
|
|
|
ptr = strstr(boot_args, "noascpoll");
|
|
if (ptr)
|
|
asc_poll = 0;
|
|
}
|
|
|
|
if (asc_poll)
|
|
printf(" polling");
|
|
else
|
|
printf(" using interrupts");
|
|
#endif
|
|
printf("\n");
|
|
|
|
sbic = &sc->sc_softc;
|
|
|
|
sbic->sc_enintr = asc_enintr;
|
|
sbic->sc_dmago = asc_dmago;
|
|
sbic->sc_dmanext = asc_dmanext;
|
|
sbic->sc_dmastop = asc_dmastop;
|
|
sbic->sc_dmacmd = 0;
|
|
|
|
/*
|
|
* eveything is a valid dma address
|
|
*/
|
|
sbic->sc_dmamask = 0;
|
|
sbic->sc_sbicp = (sbic_regmap_p) (sc->sc_podule->mod_base + ASC_SBIC);
|
|
sbic->sc_clkfreq = sbic_clock_override ? sbic_clock_override : 143;
|
|
|
|
sbic->sc_link.channel = SCSI_CHANNEL_ONLY_ONE;
|
|
sbic->sc_link.adapter_softc = sbic;
|
|
sbic->sc_link.adapter_target = 7;
|
|
sbic->sc_link.adapter = &asc_scsiswitch;
|
|
sbic->sc_link.device = &asc_scsidev;
|
|
sbic->sc_link.openings = 1; /* was 2 */
|
|
|
|
sc->sc_pagereg = sc->sc_podule->fast_base + ASC_PAGEREG;
|
|
sc->sc_intstat = sc->sc_podule->fast_base + ASC_INTSTATUS;
|
|
|
|
/* Reset the card */
|
|
|
|
WriteByte(sc->sc_pagereg, 0x80);
|
|
DELAY(500000);
|
|
WriteByte(sc->sc_pagereg, 0x00);
|
|
DELAY(250000);
|
|
|
|
sbicinit(sbic);
|
|
|
|
/* If we are polling only then we don't need a interrupt handler */
|
|
|
|
sc->sc_ih.ih_func = asc_intr;
|
|
sc->sc_ih.ih_arg = sc;
|
|
sc->sc_ih.ih_level = IPL_BIO;
|
|
sc->sc_ih.ih_name = "scsi: asc";
|
|
sc->sc_ih.ih_maskaddr = sc->sc_podule->irq_addr;
|
|
sc->sc_ih.ih_maskbits = sc->sc_podule->irq_mask;
|
|
|
|
#ifdef ASC_POLL
|
|
if (!asc_poll)
|
|
#endif
|
|
if (irq_claim(IRQ_PODULE, &sc->sc_ih))
|
|
panic("asc: Cannot claim podule IRQ\n");
|
|
|
|
/*
|
|
* attach all scsi units on us
|
|
*/
|
|
config_found(dp, &sbic->sc_link, scsiprint);
|
|
}
|
|
|
|
void
|
|
asc_enintr(sbicsc)
|
|
struct sbic_softc *sbicsc;
|
|
{
|
|
struct asc_softc *sc = (struct asc_softc *)sbicsc;
|
|
/* printf("asc_enintr\n");*/
|
|
/*
|
|
volatile struct sdmac *sdp;
|
|
|
|
sdp = dev->sc_cregs;
|
|
|
|
dev->sc_flags |= SBICF_INTR;
|
|
sdp->CNTR = CNTR_PDMD | CNTR_INTEN;
|
|
*/
|
|
sbicsc->sc_flags |= SBICF_INTR;
|
|
WriteByte(sc->sc_pagereg, 0x40);
|
|
}
|
|
|
|
|
|
int
|
|
asc_dmago(dev, addr, count, flags)
|
|
struct sbic_softc *dev;
|
|
char *addr;
|
|
int count, flags;
|
|
{
|
|
printf("asc_dmago\n");
|
|
#ifdef DDB
|
|
Debugger();
|
|
#else
|
|
panic("Hit a brick wall\n");
|
|
#endif
|
|
#if 0
|
|
volatile struct sdmac *sdp;
|
|
|
|
sdp = dev->sc_cregs;
|
|
/*
|
|
* Set up the command word based on flags
|
|
*/
|
|
dev->sc_dmacmd = CNTR_PDMD | CNTR_INTEN;
|
|
if ((flags & DMAGO_READ) == 0)
|
|
dev->sc_dmacmd |= CNTR_DDIR;
|
|
#ifdef DEBUG
|
|
if (ahsc_dmadebug & DDB_IO)
|
|
printf("ahsc_dmago: cmd %x\n", dev->sc_dmacmd);
|
|
#endif
|
|
|
|
dev->sc_flags |= SBICF_INTR;
|
|
sdp->CNTR = dev->sc_dmacmd;
|
|
sdp->ACR = (u_int) dev->sc_cur->dc_addr;
|
|
sdp->ST_DMA = 1;
|
|
|
|
return(dev->sc_tcnt);
|
|
#endif
|
|
return(0);
|
|
}
|
|
|
|
void
|
|
asc_dmastop(dev)
|
|
struct sbic_softc *dev;
|
|
{
|
|
/* printf("asc_dmastop\n");*/
|
|
#if 0
|
|
volatile struct sdmac *sdp;
|
|
int s;
|
|
|
|
sdp = dev->sc_cregs;
|
|
|
|
#ifdef DEBUG
|
|
if (ahsc_dmadebug & DDB_FOLLOW)
|
|
printf("ahsc_dmastop()\n");
|
|
#endif
|
|
if (dev->sc_dmacmd) {
|
|
s = splbio();
|
|
if ((dev->sc_dmacmd & (CNTR_TCEN | CNTR_DDIR)) == 0) {
|
|
/*
|
|
* only FLUSH if terminal count not enabled,
|
|
* and reading from peripheral
|
|
*/
|
|
sdp->FLUSH = 1;
|
|
while ((sdp->ISTR & ISTR_FE_FLG) == 0)
|
|
;
|
|
}
|
|
/*
|
|
* clear possible interrupt and stop dma
|
|
*/
|
|
sdp->CINT = 1;
|
|
sdp->SP_DMA = 1;
|
|
dev->sc_dmacmd = 0;
|
|
splx(s);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
int
|
|
asc_dmaintr(dev)
|
|
struct sbic_softc *dev;
|
|
{
|
|
panic("asc_dmaintr");
|
|
#if 0
|
|
volatile struct sdmac *sdp;
|
|
int stat, found;
|
|
|
|
sdp = dev->sc_cregs;
|
|
stat = sdp->ISTR;
|
|
|
|
if ((stat & (ISTR_INT_F|ISTR_INT_P)) == 0)
|
|
return (0);
|
|
|
|
#ifdef DEBUG
|
|
if (ahsc_dmadebug & DDB_FOLLOW)
|
|
printf("%s: dmaintr 0x%x\n", dev->sc_dev.dv_xname, stat);
|
|
#endif
|
|
|
|
/*
|
|
* both, SCSI and DMA interrupts arrive here. I chose
|
|
* arbitrarily that DMA interrupts should have higher
|
|
* precedence than SCSI interrupts.
|
|
*/
|
|
found = 0;
|
|
if (stat & ISTR_E_INT) {
|
|
++found;
|
|
|
|
sdp->CINT = 1; /* clear possible interrupt */
|
|
|
|
/*
|
|
* check for SCSI ints in the same go and
|
|
* eventually save an interrupt
|
|
*/
|
|
}
|
|
|
|
if (dev->sc_flags & SBICF_INTR && stat & ISTR_INTS)
|
|
found += sbicintr(dev);
|
|
return(found);
|
|
#endif
|
|
return(0);
|
|
}
|
|
|
|
|
|
int
|
|
asc_dmanext(dev)
|
|
struct sbic_softc *dev;
|
|
{
|
|
printf("asc_dmanext\n");
|
|
#ifdef DDB
|
|
Debugger();
|
|
#else
|
|
panic("Hit a brick wall\n");
|
|
#endif
|
|
#if 0
|
|
volatile struct sdmac *sdp;
|
|
int i, stat;
|
|
|
|
sdp = dev->sc_cregs;
|
|
|
|
if (dev->sc_cur > dev->sc_last) {
|
|
/* shouldn't happen !! */
|
|
printf("ahsc_dmanext at end !!!\n");
|
|
asc_dmastop(dev);
|
|
return(0);
|
|
}
|
|
if ((dev->sc_dmacmd & (CNTR_TCEN | CNTR_DDIR)) == 0) {
|
|
/*
|
|
* only FLUSH if terminal count not enabled,
|
|
* and reading from peripheral
|
|
*/
|
|
sdp->FLUSH = 1;
|
|
while ((sdp->ISTR & ISTR_FE_FLG) == 0)
|
|
;
|
|
}
|
|
/*
|
|
* clear possible interrupt and stop dma
|
|
*/
|
|
sdp->CINT = 1; /* clear possible interrupt */
|
|
sdp->SP_DMA = 1; /* stop dma */
|
|
sdp->CNTR = dev->sc_dmacmd;
|
|
sdp->ACR = (u_int)dev->sc_cur->dc_addr;
|
|
sdp->ST_DMA = 1;
|
|
|
|
dev->sc_tcnt = dev->sc_cur->dc_count << 1;
|
|
return(dev->sc_tcnt);
|
|
#endif
|
|
return(0);
|
|
}
|
|
|
|
void
|
|
asc_dump()
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < asc_cd.cd_ndevs; ++i)
|
|
if (asc_cd.cd_devs[i])
|
|
sbic_dump(asc_cd.cd_devs[i]);
|
|
}
|
|
|
|
int
|
|
asc_scsicmd(xs)
|
|
struct scsi_xfer *xs;
|
|
{
|
|
/* struct scsi_link *sc_link = xs->sc_link;*/
|
|
|
|
/* ensure command is polling for the moment */
|
|
#if ASC_POLL > 0
|
|
if (asc_poll)
|
|
xs->flags |= SCSI_POLL;
|
|
#endif
|
|
|
|
/* printf("id=%d lun=%dcmdlen=%d datalen=%d opcode=%02x flags=%08x status=%02x blk=%02x %02x\n",
|
|
sc_link->target, sc_link->lun, xs->cmdlen, xs->datalen, xs->cmd->opcode,
|
|
xs->flags, xs->status, xs->cmd->bytes[0], xs->cmd->bytes[1]);*/
|
|
|
|
return(sbic_scsicmd(xs));
|
|
}
|
|
|
|
|
|
int
|
|
asc_intr(sc)
|
|
struct asc_softc *sc;
|
|
{
|
|
int intr;
|
|
|
|
/* printf("ascintr:");*/
|
|
intr = ReadByte(sc->sc_intstat);
|
|
/* printf("%02x\n", intr);*/
|
|
|
|
if (intr & IS_SBIC_IRQ)
|
|
sbicintr((struct sbic_softc *)sc);
|
|
|
|
return(0); /* Pass interrupt on down the chain */
|
|
}
|
|
|
|
|
|
int kvtop()
|
|
{
|
|
printf("kvtop\n");
|
|
#ifdef DDB
|
|
Debugger();
|
|
#else
|
|
panic("Hit a brick wall\n");
|
|
#endif
|
|
return(0);
|
|
}
|
|
|
|
void alloc_z2mem()
|
|
{
|
|
panic("allocz2mem");
|
|
}
|
|
|
|
void isztwomem()
|
|
{
|
|
panic("isz2mem");
|
|
}
|
|
|
|
void PREP_DMA_MEM()
|
|
{
|
|
panic("PREP_DMA_MEM");
|
|
}
|