Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/usb/if_auereg.h

276 lines
7.9 KiB
C
Raw Blame History

/* $NetBSD: if_auereg.h,v 1.13 2000/05/06 20:38:59 augustss Exp $ */
/*
* Copyright (c) 1997, 1998, 1999
* Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD: src/sys/dev/usb/if_auereg.h,v 1.2 2000/01/08 06:52:36 wpaul Exp $
*/
/*
* Register definitions for ADMtek Pegasus AN986 USB to Ethernet
* chip. The Pegasus uses a total of four USB endpoints: the control
* endpoint (0), a bulk read endpoint for receiving packets (1),
* a bulk write endpoint for sending packets (2) and an interrupt
* endpoint for passing RX and TX status (3). Endpoint 0 is used
* to read and write the ethernet module's registers. All registers
* are 8 bits wide.
*
* Packet transfer is done in 64 byte chunks. The last chunk in a
* transfer is denoted by having a length less that 64 bytes. For
* the RX case, the data includes an optional RX status word.
*/
#define AUE_UR_READREG 0xF0
#define AUE_UR_WRITEREG 0xF1
#define AUE_CONFIG_NO 1
#define AUE_IFACE_IDX 0
/*
* Note that while the ADMtek technically has four
* endpoints, the control endpoint (endpoint 0) is
* regarded as special by the USB code and drivers
* don't have direct access to it. (We access it
* using usbd_do_request() when reading/writing
* registers.) Consequently, our endpoint indexes
* don't match those in the ADMtek Pegasus manual:
* we consider the RX data endpoint to be index 0
* and work up from there.
*/
#define AUE_ENDPT_RX 0x0
#define AUE_ENDPT_TX 0x1
#define AUE_ENDPT_INTR 0x2
#define AUE_ENDPT_MAX 0x3
#define AUE_CTL0 0x00
#define AUE_CTL1 0x01
#define AUE_CTL2 0x02
#define AUE_MAR0 0x08
#define AUE_MAR1 0x09
#define AUE_MAR2 0x0A
#define AUE_MAR3 0x0B
#define AUE_MAR4 0x0C
#define AUE_MAR5 0x0D
#define AUE_MAR6 0x0E
#define AUE_MAR7 0x0F
#define AUE_MAR AUE_MAR0
#define AUE_PAR0 0x10
#define AUE_PAR1 0x11
#define AUE_PAR2 0x12
#define AUE_PAR3 0x13
#define AUE_PAR4 0x14
#define AUE_PAR5 0x15
#define AUE_PAR AUE_PAR0
#define AUE_PAUSE0 0x18
#define AUE_PAUSE1 0x19
#define AUE_PAUSE AUE_PAUSE0
#define AUE_RX_FLOWCTL_CNT 0x1A
#define AUE_RX_FLOWCTL_FIFO 0x1B
#define AUE_EE_REG 0x20
#define AUE_EE_DATA0 0x21
#define AUE_EE_DATA1 0x22
#define AUE_EE_DATA AUE_EE_DATA0
#define AUE_EE_CTL 0x23
#define AUE_PHY_ADDR 0x25
#define AUE_PHY_DATA0 0x26
#define AUE_PHY_DATA1 0x27
#define AUE_PHY_DATA AUE_PHY_DATA0
#define AUE_PHY_CTL 0x28
#define AUE_USB_STS 0x2A
#define AUE_TXSTAT0 0x2B
#define AUE_TXSTAT1 0x2C
#define AUE_TXSTAT AUE_TXSTAT0
#define AUE_RXSTAT 0x2D
#define AUE_PKTLOST0 0x2E
#define AUE_PKTLOST1 0x2F
#define AUE_PKTLOST AUE_PKTLOST0
#define AUE_GPIO0 0x7E
#define AUE_GPIO1 0x7F
#define AUE_CTL0_INCLUDE_RXCRC 0x01
#define AUE_CTL0_ALLMULTI 0x02
#define AUE_CTL0_STOP_BACKOFF 0x04
#define AUE_CTL0_RXSTAT_APPEND 0x08
#define AUE_CTL0_WAKEON_ENB 0x10
#define AUE_CTL0_RXPAUSE_ENB 0x20
#define AUE_CTL0_RX_ENB 0x40
#define AUE_CTL0_TX_ENB 0x80
#define AUE_CTL1_HOMELAN 0x04
#define AUE_CTL1_RESETMAC 0x08
#define AUE_CTL1_SPEEDSEL 0x10 /* 0 = 10mbps, 1 = 100mbps */
#define AUE_CTL1_DUPLEX 0x20 /* 0 = half, 1 = full */
#define AUE_CTL1_DELAYHOME 0x40
#define AUE_CTL2_EP3_CLR 0x01 /* reading EP3 clrs status regs */
#define AUE_CTL2_RX_BADFRAMES 0x02
#define AUE_CTL2_RX_PROMISC 0x04
#define AUE_CTL2_LOOPBACK 0x08
#define AUE_CTL2_EEPROMWR_ENB 0x10
#define AUE_CTL2_EEPROM_LOAD 0x20
#define AUE_EECTL_WRITE 0x01
#define AUE_EECTL_READ 0x02
#define AUE_EECTL_DONE 0x04
#define AUE_PHYCTL_PHYREG 0x1F
#define AUE_PHYCTL_WRITE 0x20
#define AUE_PHYCTL_READ 0x40
#define AUE_PHYCTL_DONE 0x80
#define AUE_USBSTS_SUSPEND 0x01
#define AUE_USBSTS_RESUME 0x02
#define AUE_TXSTAT0_JABTIMO 0x04
#define AUE_TXSTAT0_CARLOSS 0x08
#define AUE_TXSTAT0_NOCARRIER 0x10
#define AUE_TXSTAT0_LATECOLL 0x20
#define AUE_TXSTAT0_EXCESSCOLL 0x40
#define AUE_TXSTAT0_UNDERRUN 0x80
#define AUE_TXSTAT1_PKTCNT 0x0F
#define AUE_TXSTAT1_FIFO_EMPTY 0x40
#define AUE_TXSTAT1_FIFO_FULL 0x80
#define AUE_RXSTAT_OVERRUN 0x01
#define AUE_RXSTAT_PAUSE 0x02
#define AUE_GPIO_IN0 0x01
#define AUE_GPIO_OUT0 0x02
#define AUE_GPIO_SEL0 0x04
#define AUE_GPIO_IN1 0x08
#define AUE_GPIO_OUT1 0x10
#define AUE_GPIO_SEL1 0x20
struct aue_intrpkt {
u_int8_t aue_txstat0;
u_int8_t aue_txstat1;
u_int8_t aue_rxstat;
u_int8_t aue_rxlostpkt0;
u_int8_t aue_rxlostpkt1;
u_int8_t aue_wakeupstat;
u_int8_t aue_rsvd;
u_int8_t _pad;
};
#define AUE_INTR_PKTLEN 8
struct aue_rxpkt {
uWord aue_pktlen;
uByte aue_rxstat;
};
#define AUE_RXSTAT_MCAST 0x01
#define AUE_RXSTAT_GIANT 0x02
#define AUE_RXSTAT_RUNT 0x04
#define AUE_RXSTAT_CRCERR 0x08
#define AUE_RXSTAT_DRIBBLE 0x10
#define AUE_RXSTAT_MASK 0x1E
/*************** The rest belongs in if_auevar.h *************/
#define AUE_TX_LIST_CNT 1
#define AUE_RX_LIST_CNT 1
struct aue_softc;
struct aue_chain {
struct aue_softc *aue_sc;
usbd_xfer_handle aue_xfer;
char *aue_buf;
struct mbuf *aue_mbuf;
int aue_idx;
};
struct aue_cdata {
struct aue_chain aue_tx_chain[AUE_TX_LIST_CNT];
struct aue_chain aue_rx_chain[AUE_RX_LIST_CNT];
struct aue_intrpkt aue_ibuf;
int aue_tx_prod;
int aue_tx_cons;
int aue_tx_cnt;
int aue_rx_prod;
};
struct aue_softc {
USBBASEDEVICE aue_dev;
#if defined(__FreeBSD__)
struct arpcom arpcom;
device_t aue_miibus;
#define GET_IFP(sc) (&(sc)->arpcom.ac_if)
#define GET_MII(sc) (device_get_softc((sc)->aue_miibus))
#elif defined(__NetBSD__)
struct ethercom aue_ec;
struct mii_data aue_mii;
#if NRND > 0
rndsource_element_t rnd_source;
#endif
#define GET_IFP(sc) (&(sc)->aue_ec.ec_if)
#define GET_MII(sc) (&(sc)->aue_mii)
#elif defined(__OpenBSD__)
struct arpcom arpcom;
struct mii_data aue_mii;
#if NRND > 0
rndsource_element_t rnd_source;
#endif
#define GET_IFP(sc) (&(sc)->arpcom.ac_if)
#define GET_MII(sc) (&(sc)->aue_mii)
#endif
usb_callout_t aue_stat_ch;
usbd_device_handle aue_udev;
usbd_interface_handle aue_iface;
u_int16_t aue_vendor;
u_int16_t aue_product;
int aue_ed[AUE_ENDPT_MAX];
usbd_pipe_handle aue_ep[AUE_ENDPT_MAX];
u_int8_t aue_link;
int aue_if_flags;
struct aue_cdata aue_cdata;
char aue_linksys;
char aue_dying;
char aue_attached;
u_int aue_rx_errs;
u_int aue_intr_errs;
struct timeval aue_rx_notice;
};
#define AUE_TIMEOUT 1000
#define ETHER_ALIGN 2
#define AUE_BUFSZ 1536
#define AUE_MIN_FRAMELEN 60
#define AUE_TX_TIMEOUT 10000 /* ms */
#define AUE_INTR_INTERVAL 100 /* ms */
Reference in New Issue View Git Blame Copy Permalink