1062 lines
27 KiB
C
1062 lines
27 KiB
C
/* $NetBSD: mb86950.c,v 1.9 2007/03/04 06:01:58 christos Exp $ */
|
|
|
|
/*
|
|
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
|
|
*
|
|
* This software may be used, modified, copied, distributed, and sold, in
|
|
* both source and binary form provided that the above copyright, these
|
|
* terms and the following disclaimer are retained. The name of the author
|
|
* and/or the contributor may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Portions copyright (C) 1993, David Greenman. This software may be used,
|
|
* modified, copied, distributed, and sold, in both source and binary form
|
|
* provided that the above copyright and these terms are retained. Under no
|
|
* circumstances is the author responsible for the proper functioning of this
|
|
* software, nor does the author assume any responsibility for damages
|
|
* incurred with its use.
|
|
*/
|
|
|
|
/*
|
|
* Portions copyright (c) 1995 Mika Kortelainen
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Mika Kortelainen
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Device driver for Fujitsu MB86960A/MB86965A based Ethernet cards.
|
|
* Contributed by M.S. <seki@sysrap.cs.fujitsu.co.jp>
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: mb86950.c,v 1.9 2007/03/04 06:01:58 christos Exp $");
|
|
|
|
/*
|
|
* Device driver for Fujitsu mb86950 based Ethernet cards.
|
|
* Adapted by Dave J. Barnes from various Internet sources including
|
|
* mb86960.c (NetBSD), if_qn.c (NetBSD/Amiga), DOS Packet Driver (Brian Fisher,
|
|
* Queens University), EtherBoot Driver (Ken Yap).
|
|
*/
|
|
|
|
/* XXX There are still rough edges......
|
|
*
|
|
* (1) There is no watchdog timer for the transmitter. It's doubtful that
|
|
* transmit from the chip could be restarted without a hardware reset
|
|
* though. (Fixed - not fully tested)
|
|
*
|
|
* (2) The media interface callback goo is broke. No big deal since to change
|
|
* from aui to bnc on the old Tiara LANCard requires moving 8 board jumpers.
|
|
* Other cards (SMC ?) using the EtherStar chip may support media change
|
|
* via software. (Fixed - tested)
|
|
*
|
|
* (3) The maximum outstanding transmit packets is set to 4. What
|
|
* is a good limit of outstanding transmit packets for the EtherStar?
|
|
* Is there a way to tell how many bytes are remaining to be
|
|
* transmitted? [no]
|
|
---
|
|
When the EtherStar was designed, CPU power was a fraction
|
|
of what it is now. The single EtherStar transmit buffer
|
|
was fine. It was unlikely that the CPU could outrun the
|
|
EtherStar. However, things in 2004 are quite different.
|
|
sc->txb_size is used to keep the CPU from overrunning the
|
|
EtherStar. At most allow one packet transmitting and one
|
|
going into the fifo.
|
|
|
|
---
|
|
No, that isn't right either :(
|
|
|
|
* (4) Multicast isn't supported. Feel free to add multicast code
|
|
* if you know how to make the EtherStar do multicast. Otherwise
|
|
* you'd have to use promiscuous mode and do multicast in software. OUCH!
|
|
*
|
|
* (5) There are no bus_space_barrier calls used. Are they needed? Maybe not.
|
|
*
|
|
* (6) Access to the fifo assumes word (16 bit) mode. Cards configured for
|
|
* byte wide fifo access will require driver code changes.
|
|
*
|
|
* Only the minimum code necessary to make the Tiara LANCard work
|
|
* has been tested. Other cards may require more work, especially
|
|
* byte mode fifo and if DMA is used.
|
|
*
|
|
* djb / 2004
|
|
*/
|
|
|
|
#include "opt_inet.h"
|
|
#include "bpfilter.h"
|
|
#include "rnd.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/device.h>
|
|
#if NRND > 0
|
|
#include <sys/rnd.h>
|
|
#endif
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_ether.h>
|
|
|
|
#ifdef INET
|
|
#include <netinet/in.h>
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in_var.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/if_inarp.h>
|
|
#endif
|
|
|
|
|
|
#if NBPFILTER > 0
|
|
#include <net/bpf.h>
|
|
#include <net/bpfdesc.h>
|
|
#endif
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/ic/mb86950reg.h>
|
|
#include <dev/ic/mb86950var.h>
|
|
|
|
#ifndef __BUS_SPACE_HAS_STREAM_METHODS
|
|
#define bus_space_write_stream_2 bus_space_write_2
|
|
#define bus_space_write_multi_stream_2 bus_space_write_multi_2
|
|
#define bus_space_read_multi_stream_2 bus_space_read_multi_2
|
|
#endif /* __BUS_SPACE_HAS_STREAM_METHODS */
|
|
|
|
/* Standard driver entry points. These can be static. */
|
|
int mb86950_ioctl __P((struct ifnet *, u_long, void *));
|
|
void mb86950_init __P((struct mb86950_softc *));
|
|
void mb86950_start __P((struct ifnet *));
|
|
void mb86950_watchdog __P((struct ifnet *));
|
|
void mb86950_reset __P((struct mb86950_softc *));
|
|
|
|
/* Local functions. */
|
|
void mb86950_stop __P((struct mb86950_softc *));
|
|
void mb86950_tint __P((struct mb86950_softc *, u_int8_t));
|
|
void mb86950_rint __P((struct mb86950_softc *, u_int8_t));
|
|
int mb86950_get_fifo __P((struct mb86950_softc *, u_int));
|
|
ushort mb86950_put_fifo __P((struct mb86950_softc *, struct mbuf *));
|
|
void mb86950_drain_fifo __P((struct mb86950_softc *));
|
|
|
|
int mb86950_mediachange __P((struct ifnet *));
|
|
void mb86950_mediastatus __P((struct ifnet *, struct ifmediareq *));
|
|
|
|
|
|
#if ESTAR_DEBUG >= 1
|
|
void mb86950_dump __P((int, struct mb86950_softc *));
|
|
#endif
|
|
|
|
/********************************************************************/
|
|
|
|
void
|
|
mb86950_attach(sc, myea)
|
|
struct mb86950_softc *sc;
|
|
u_int8_t *myea;
|
|
{
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (myea == NULL) {
|
|
printf("%s: ethernet address shouldn't be NULL\n",
|
|
sc->sc_dev.dv_xname);
|
|
panic("NULL ethernet address");
|
|
}
|
|
#endif
|
|
|
|
/* Initialize 86950. */
|
|
mb86950_stop(sc);
|
|
|
|
memcpy(sc->sc_enaddr, myea, sizeof(sc->sc_enaddr));
|
|
|
|
sc->sc_stat |= ESTAR_STAT_ENABLED;
|
|
}
|
|
|
|
/*
|
|
* Stop everything on the interface.
|
|
*
|
|
* All buffered packets, both transmitting and receiving,
|
|
* if any, will be lost by stopping the interface.
|
|
*/
|
|
void
|
|
mb86950_stop(sc)
|
|
struct mb86950_softc *sc;
|
|
{
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
|
|
/* Stop interface hardware. */
|
|
bus_space_write_1(bst, bsh, DLCR_CONFIG, DISABLE_DLC);
|
|
delay(200);
|
|
|
|
/* Disable interrupts. */
|
|
bus_space_write_1(bst, bsh, DLCR_TX_INT_EN, 0);
|
|
bus_space_write_1(bst, bsh, DLCR_RX_INT_EN, 0);
|
|
|
|
/* Ack / Clear all interrupt status. */
|
|
bus_space_write_1(bst, bsh, DLCR_TX_STAT, 0xff);
|
|
bus_space_write_1(bst, bsh, DLCR_RX_STAT, 0xff);
|
|
|
|
/* Clear DMA Bit */
|
|
bus_space_write_2(bst, bsh, BMPR_DMA, 0);
|
|
|
|
/* accept no packets */
|
|
bus_space_write_1(bst, bsh, DLCR_TX_MODE, 0);
|
|
bus_space_write_1(bst, bsh, DLCR_RX_MODE, 0);
|
|
|
|
mb86950_drain_fifo(sc);
|
|
|
|
}
|
|
|
|
void
|
|
mb86950_drain_fifo(sc)
|
|
struct mb86950_softc *sc;
|
|
{
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
|
|
/* Read data until bus read error (i.e. buffer empty). */
|
|
/* XXX There ought to be a better way, eats CPU and bothers the chip */
|
|
while (!(bus_space_read_1(bst, bsh, DLCR_RX_STAT) & RX_BUS_RD_ERR))
|
|
bus_space_read_2(bst, bsh, BMPR_FIFO);
|
|
/* XXX */
|
|
|
|
/* Clear Bus Rd Error */
|
|
bus_space_write_1(bst, bsh, DLCR_RX_STAT, RX_BUS_RD_ERR);
|
|
}
|
|
|
|
/*
|
|
* Install interface into kernel networking data structures
|
|
*/
|
|
void
|
|
mb86950_config(struct mb86950_softc *sc, int *media,
|
|
int nmedia, int defmedia)
|
|
{
|
|
struct ifnet *ifp = &sc->sc_ec.ec_if;
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
|
|
/* Initialize ifnet structure. */
|
|
strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
|
|
ifp->if_softc = sc;
|
|
ifp->if_start = mb86950_start;
|
|
ifp->if_ioctl = mb86950_ioctl;
|
|
ifp->if_watchdog = mb86950_watchdog;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS;
|
|
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
/* Initialize media goo. */
|
|
/* XXX The Tiara LANCard uses board jumpers to change media.
|
|
* This code may have to be changed for other cards.
|
|
*/
|
|
ifmedia_init(&sc->sc_media, 0, mb86950_mediachange, mb86950_mediastatus);
|
|
ifmedia_add(&sc->sc_media, IFM_ETHER | IFM_MANUAL, 0, NULL);
|
|
ifmedia_set(&sc->sc_media, IFM_ETHER | IFM_MANUAL);
|
|
|
|
/* Attach the interface. */
|
|
if_attach(ifp);
|
|
|
|
/* Feed the chip the station address. */
|
|
bus_space_write_region_1(bst, bsh, DLCR_NODE_ID, sc->sc_enaddr, ETHER_ADDR_LEN);
|
|
|
|
ether_ifattach(ifp, sc->sc_enaddr);
|
|
|
|
#if NRND > 0
|
|
rnd_attach_source(&sc->rnd_source, sc->sc_dev.dv_xname,
|
|
RND_TYPE_NET, 0);
|
|
#endif
|
|
|
|
/* XXX No! This doesn't work - DLCR6 of the mb86950 is different
|
|
|
|
bus_space_write_1(bst, bsh, DLCR_CONFIG, 0x0f);
|
|
buf_config = bus_space_read_1(bst, bsh, DLCR_CONFIG);
|
|
|
|
sc->txb_count = ((buf_config & 0x0c) ? 2 : 1);
|
|
sc->txb_size = 1024 * (2 << ((buf_config & 0x0c) ? (((buf_config & 0x0c) >> 2) - 1) : 0));
|
|
sc->txb_free = (sc->txb_size * sc->txb_count) / 1500;
|
|
|
|
sc->rxb_size = ((8 << (buf_config & 3)) * 1024) - (sc->txb_size * sc->txb_count);
|
|
sc->rxb_max = sc->rxb_size / 64;
|
|
|
|
printf("mb86950: Buffer Size %dKB with %d transmit buffer(s) %dKB each.\n",
|
|
(8 << (buf_config & 3)), sc->txb_count, (sc->txb_size / 1024));
|
|
printf(" Transmit Buffer Space for %d maximum sized packet(s).\n",sc->txb_free);
|
|
printf(" System Bus Width %d bits, Buffer Memory %d bits.\n",
|
|
((buf_config & 0x20) ? 8 : 16),
|
|
((buf_config & 0x10) ? 8 : 16));
|
|
|
|
*/
|
|
|
|
/* Set reasonable values for number of packet flow control if not
|
|
* set elsewhere */
|
|
if (sc->txb_num_pkt == 0) sc->txb_num_pkt = 1;
|
|
if (sc->rxb_num_pkt == 0) sc->rxb_num_pkt = 100;
|
|
|
|
/* Print additional info when attached. */
|
|
printf("%s: Ethernet address %s\n", sc->sc_dev.dv_xname,
|
|
ether_sprintf(sc->sc_enaddr));
|
|
|
|
/* The attach is successful. */
|
|
sc->sc_stat |= ESTAR_STAT_ATTACHED;
|
|
}
|
|
|
|
/*
|
|
* Media change callback.
|
|
*/
|
|
int
|
|
mb86950_mediachange(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
|
|
struct mb86950_softc *sc = ifp->if_softc;
|
|
|
|
if (sc->sc_mediachange)
|
|
return ((*sc->sc_mediachange)(sc));
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Media status callback.
|
|
*/
|
|
void
|
|
mb86950_mediastatus(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct mb86950_softc *sc = ifp->if_softc;
|
|
|
|
if ((sc->sc_stat & ESTAR_STAT_ENABLED) == 0) {
|
|
ifmr->ifm_active = IFM_ETHER | IFM_NONE;
|
|
ifmr->ifm_status = 0;
|
|
return;
|
|
}
|
|
|
|
if (sc->sc_mediastatus)
|
|
(*sc->sc_mediastatus)(sc, ifmr);
|
|
|
|
}
|
|
|
|
/*
|
|
* Reset interface.
|
|
*/
|
|
void
|
|
mb86950_reset(sc)
|
|
struct mb86950_softc *sc;
|
|
{
|
|
int s;
|
|
|
|
s = splnet();
|
|
log(LOG_ERR, "%s: device reset\n", sc->sc_dev.dv_xname);
|
|
mb86950_stop(sc);
|
|
mb86950_init(sc);
|
|
splx(s);
|
|
}
|
|
|
|
/*
|
|
* Device timeout/watchdog routine. Entered if the device neglects to
|
|
* generate an interrupt after a transmit has been started on it.
|
|
*/
|
|
void
|
|
mb86950_watchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct mb86950_softc *sc = ifp->if_softc;
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
u_int8_t tstat;
|
|
|
|
/* verbose watchdog messages for debugging timeouts */
|
|
if ((tstat = bus_space_read_1(bst, bsh, DLCR_TX_STAT)) != 0) {
|
|
if (tstat & TX_CR_LOST) {
|
|
if ((tstat & (TX_COL | TX_16COL)) == 0) {
|
|
log(LOG_ERR, "%s: carrier lost\n",
|
|
sc->sc_dev.dv_xname);
|
|
} else {
|
|
log(LOG_ERR, "%s: excessive collisions\n",
|
|
sc->sc_dev.dv_xname);
|
|
}
|
|
}
|
|
else if ((tstat & (TX_UNDERFLO | TX_BUS_WR_ERR)) != 0) {
|
|
log(LOG_ERR, "%s: tx fifo underflow/overflow\n",
|
|
sc->sc_dev.dv_xname);
|
|
} else {
|
|
log(LOG_ERR, "%s: transmit error\n",
|
|
sc->sc_dev.dv_xname);
|
|
}
|
|
} else {
|
|
log(LOG_ERR, "%s: device timeout\n", sc->sc_dev.dv_xname);
|
|
}
|
|
|
|
/* Don't know how many packets are lost by this accident.
|
|
* ... So just errors = errors + 1
|
|
*/
|
|
ifp->if_oerrors++;
|
|
|
|
mb86950_reset(sc);
|
|
|
|
}
|
|
|
|
/*
|
|
******************** IOCTL
|
|
* Process an ioctl request.
|
|
*/
|
|
int
|
|
mb86950_ioctl(ifp, cmd, data)
|
|
struct ifnet *ifp;
|
|
u_long cmd;
|
|
void *data;
|
|
{
|
|
struct mb86950_softc *sc = ifp->if_softc;
|
|
struct ifaddr *ifa = (struct ifaddr *)data;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
|
|
int s, error = 0;
|
|
|
|
s = splnet();
|
|
|
|
switch (cmd) {
|
|
case SIOCSIFADDR:
|
|
/* XXX depreciated ? What should I use instead? */
|
|
if ((error = mb86950_enable(sc)) != 0)
|
|
break;
|
|
|
|
ifp->if_flags |= IFF_UP;
|
|
|
|
switch (ifa->ifa_addr->sa_family) {
|
|
|
|
#ifdef INET
|
|
case AF_INET:
|
|
mb86950_init(sc);
|
|
arp_ifinit(ifp, ifa);
|
|
break;
|
|
#endif
|
|
|
|
|
|
default:
|
|
mb86950_init(sc);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case SIOCSIFFLAGS:
|
|
if ((ifp->if_flags & IFF_UP) == 0 &&
|
|
(ifp->if_flags & IFF_RUNNING) != 0) {
|
|
/*
|
|
* If interface is marked down and it is running, then
|
|
* stop it.
|
|
*/
|
|
mb86950_stop(sc);
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
mb86950_disable(sc);
|
|
|
|
} else if ((ifp->if_flags & IFF_UP) != 0 &&
|
|
(ifp->if_flags & IFF_RUNNING) == 0) {
|
|
/*
|
|
* If interface is marked up and it is stopped, then
|
|
* start it.
|
|
*/
|
|
if ((error = mb86950_enable(sc)) != 0)
|
|
break;
|
|
mb86950_init(sc);
|
|
|
|
} else if ((ifp->if_flags & IFF_UP) != 0) {
|
|
/*
|
|
* Reset the interface to pick up changes in any other
|
|
* flags that affect hardware registers.
|
|
*/
|
|
/* Setmode not supported
|
|
mb86950_setmode(sc);
|
|
*/
|
|
}
|
|
|
|
#if ESTAR_DEBUG >= 1
|
|
/* "ifconfig fe0 debug" to print register dump. */
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
log(LOG_INFO, "%s: SIOCSIFFLAGS(DEBUG)\n",
|
|
sc->sc_dev.dv_xname);
|
|
mb86950_dump(LOG_DEBUG, sc);
|
|
}
|
|
#endif
|
|
break;
|
|
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->sc_media, cmd);
|
|
break;
|
|
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Initialize device.
|
|
*/
|
|
void
|
|
mb86950_init(sc)
|
|
struct mb86950_softc *sc;
|
|
{
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
struct ifnet *ifp = &sc->sc_ec.ec_if;
|
|
|
|
/* Reset transmitter flags. */
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ifp->if_timer = 0;
|
|
sc->txb_sched = 0;
|
|
|
|
bus_space_write_1(bst, bsh, DLCR_TX_MODE, LBC);
|
|
bus_space_write_1(bst, bsh, DLCR_RX_MODE, NORMAL_MODE);
|
|
|
|
/* Enable interrupts. */
|
|
bus_space_write_1(bst, bsh, DLCR_TX_INT_EN, TX_MASK);
|
|
bus_space_write_1(bst, bsh, DLCR_RX_INT_EN, RX_MASK);
|
|
|
|
/* Enable transmitter and receiver. */
|
|
bus_space_write_1(bst, bsh, DLCR_CONFIG, ENABLE_DLC);
|
|
delay(200);
|
|
|
|
/* Set 'running' flag. */
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
|
|
/* ...and attempt to start output. */
|
|
mb86950_start(ifp);
|
|
|
|
}
|
|
|
|
void
|
|
mb86950_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct mb86950_softc *sc = ifp->if_softc;
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
struct mbuf *m;
|
|
int len;
|
|
|
|
if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
|
|
return;
|
|
|
|
IF_DEQUEUE(&ifp->if_snd, m);
|
|
if (m == 0)
|
|
return;
|
|
|
|
#if NBPFILTER > 0
|
|
/* Tap off here if there is a BPF listener. */
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp->if_bpf, m);
|
|
#endif
|
|
|
|
/* Send the packet to the mb86950 */
|
|
len = mb86950_put_fifo(sc,m);
|
|
m_freem(m);
|
|
|
|
/* XXX bus_space_barrier here ? */
|
|
if (bus_space_read_1(bst, bsh, DLCR_TX_STAT) & (TX_UNDERFLO | TX_BUS_WR_ERR)) {
|
|
log(LOG_ERR, "%s: tx fifo underflow/overflow\n", sc->sc_dev.dv_xname);
|
|
}
|
|
|
|
bus_space_write_2(bst, bsh, BMPR_TX_LENGTH, len | TRANSMIT_START);
|
|
|
|
bus_space_write_1(bst, bsh, DLCR_TX_INT_EN, TX_MASK);
|
|
/* XXX */
|
|
sc->txb_sched++;
|
|
|
|
/* We have space for 'n' transmit packets of size 'mtu. */
|
|
if (sc->txb_sched > sc->txb_num_pkt) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
ifp->if_timer = 2;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Send packet - copy packet from mbuf to the fifo
|
|
*/
|
|
u_short
|
|
mb86950_put_fifo(sc, m)
|
|
struct mb86950_softc *sc;
|
|
struct mbuf *m;
|
|
{
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
u_short *data;
|
|
u_char savebyte[2];
|
|
int len, len1, wantbyte;
|
|
u_short totlen;
|
|
|
|
memset(savebyte, 0, sizeof(savebyte)); /* XXX gcc */
|
|
|
|
totlen = wantbyte = 0;
|
|
|
|
for (; m != NULL; m = m->m_next) {
|
|
data = mtod(m, u_short *);
|
|
len = m->m_len;
|
|
if (len > 0) {
|
|
totlen += len;
|
|
|
|
/* Finish the last word. */
|
|
if (wantbyte) {
|
|
savebyte[1] = *((u_char *)data);
|
|
bus_space_write_2(bst, bsh, BMPR_FIFO, *savebyte);
|
|
data = (u_short *)((u_char *)data + 1);
|
|
len--;
|
|
wantbyte = 0;
|
|
}
|
|
/* Output contiguous words. */
|
|
if (len > 1) {
|
|
len1 = len/2;
|
|
bus_space_write_multi_stream_2(bst, bsh, BMPR_FIFO, data, len1);
|
|
data += len1;
|
|
len &= 1;
|
|
}
|
|
/* Save last byte, if necessary. */
|
|
if (len == 1) {
|
|
savebyte[0] = *((u_char *)data);
|
|
wantbyte = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (wantbyte) {
|
|
savebyte[1] = 0;
|
|
bus_space_write_2(bst, bsh, BMPR_FIFO, *savebyte);
|
|
}
|
|
|
|
if (totlen < (ETHER_MIN_LEN - ETHER_CRC_LEN)) {
|
|
|
|
/* Fill the rest of the packet with zeros. */
|
|
/* XXX Replace this mess with something else, eats CPU */
|
|
/* The zero fill and last byte ought to be combined somehow */
|
|
for(len = totlen + 1; len < (ETHER_MIN_LEN - ETHER_CRC_LEN); len += 2)
|
|
bus_space_write_2(bst, bsh, BMPR_FIFO, 0);
|
|
/* XXX */
|
|
|
|
totlen = (ETHER_MIN_LEN - ETHER_CRC_LEN);
|
|
}
|
|
|
|
return (totlen);
|
|
}
|
|
|
|
/*
|
|
* Handle interrupts.
|
|
* Ethernet interface interrupt processor
|
|
*/
|
|
int
|
|
mb86950_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct mb86950_softc *sc = arg;
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
struct ifnet *ifp = &sc->sc_ec.ec_if;
|
|
u_int8_t tstat, rstat;
|
|
|
|
/* Get interrupt status. */
|
|
tstat = bus_space_read_1(bst, bsh, DLCR_TX_STAT);
|
|
rstat = bus_space_read_1(bst, bsh, DLCR_RX_STAT);
|
|
|
|
if (tstat == 0 && rstat == 0) return (0);
|
|
|
|
/* Disable etherstar interrupts so that we won't miss anything. */
|
|
bus_space_write_1(bst, bsh, DLCR_TX_INT_EN, 0);
|
|
bus_space_write_1(bst, bsh, DLCR_RX_INT_EN, 0);
|
|
|
|
/*
|
|
* Handle transmitter interrupts. Handle these first because
|
|
* the receiver will reset the board under some conditions.
|
|
*/
|
|
if (tstat != 0) {
|
|
|
|
mb86950_tint(sc, tstat);
|
|
|
|
/* acknowledge transmit interrupt status. */
|
|
bus_space_write_1(bst, bsh, DLCR_TX_STAT, tstat);
|
|
|
|
}
|
|
|
|
/* Handle receiver interrupts. */
|
|
if (rstat != 0) {
|
|
|
|
mb86950_rint(sc, rstat);
|
|
|
|
/* acknowledge receive interrupt status. */
|
|
bus_space_write_1(bst, bsh, DLCR_RX_STAT, rstat);
|
|
|
|
}
|
|
|
|
/* If tx still pending reset tx interrupt mask */
|
|
if (sc->txb_sched > 0)
|
|
bus_space_write_1(bst, bsh, DLCR_TX_INT_EN, TX_MASK);
|
|
|
|
/*
|
|
* If it looks like the transmitter can take more data,
|
|
* attempt to start output on the interface. This is done
|
|
* after handling the receiver interrupt to give the
|
|
* receive operation priority.
|
|
*/
|
|
|
|
if ((ifp->if_flags & IFF_OACTIVE) == 0)
|
|
mb86950_start(ifp);
|
|
|
|
/* Set receive interrupts back */
|
|
bus_space_write_1(bst, bsh, DLCR_RX_INT_EN, RX_MASK);
|
|
|
|
return(1);
|
|
}
|
|
|
|
/* Transmission interrupt handler */
|
|
void
|
|
mb86950_tint(sc, tstat)
|
|
struct mb86950_softc *sc;
|
|
u_int8_t tstat;
|
|
{
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
struct ifnet *ifp = &sc->sc_ec.ec_if;
|
|
int col;
|
|
|
|
if (tstat & (TX_UNDERFLO | TX_BUS_WR_ERR)) {
|
|
/* XXX What do we need to do here? reset ? */
|
|
ifp->if_oerrors++;
|
|
}
|
|
|
|
/* excessive collision */
|
|
if (tstat & TX_16COL) {
|
|
ifp->if_collisions += 16;
|
|
/* 16 collisions means that the packet has been thrown away. */
|
|
if (sc->txb_sched > 0)
|
|
sc->txb_sched--;
|
|
}
|
|
|
|
/* transmission complete. */
|
|
if (tstat & TX_DONE) {
|
|
/* successfully transmitted packets ++. */
|
|
ifp->if_opackets++;
|
|
if (sc->txb_sched > 0)
|
|
sc->txb_sched--;
|
|
|
|
/* Collision count valid only when TX_DONE is set */
|
|
if (tstat & TX_COL) {
|
|
col = (bus_space_read_1(bst, bsh, DLCR_TX_MODE) & COL_MASK) >> 4;
|
|
ifp->if_collisions = ifp->if_collisions + col;
|
|
}
|
|
}
|
|
|
|
if (sc->txb_sched == 0) {
|
|
/* Reset output active flag and stop timer. */
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ifp->if_timer = 0;
|
|
}
|
|
}
|
|
|
|
/* receiver interrupt. */
|
|
void
|
|
mb86950_rint(sc, rstat)
|
|
struct mb86950_softc *sc;
|
|
u_int8_t rstat;
|
|
{
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
struct ifnet *ifp = &sc->sc_ec.ec_if;
|
|
u_int status, len;
|
|
int i;
|
|
|
|
/* Update statistics if this interrupt is caused by an error. */
|
|
if (rstat & RX_ERR_MASK) {
|
|
|
|
/* tried to read past end of fifo, should be harmless
|
|
* count everything else
|
|
*/
|
|
if ((rstat & RX_BUS_RD_ERR) == 0) {
|
|
ifp->if_ierrors++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* mb86950 has a flag indicating "receive buffer empty."
|
|
* We just loop checking the flag to pull out all received
|
|
* packets.
|
|
*
|
|
* We limit the number of iterrations to avoid infinite loop.
|
|
* It can be caused by a very slow CPU (some broken
|
|
* peripheral may insert incredible number of wait cycles)
|
|
* or, worse, by a broken mb86950 chip.
|
|
*/
|
|
for (i = 0; i < sc->rxb_num_pkt; i++) {
|
|
/* Stop the iterration if 86950 indicates no packets. */
|
|
if (bus_space_read_1(bst, bsh, DLCR_RX_MODE) & RX_BUF_EMTY)
|
|
break;
|
|
|
|
/* receive packet status */
|
|
status = bus_space_read_2(bst, bsh, BMPR_FIFO);
|
|
|
|
/* bad packet? */
|
|
if ((status & GOOD_PKT) == 0) {
|
|
ifp->if_ierrors++;
|
|
mb86950_drain_fifo(sc);
|
|
continue;
|
|
}
|
|
|
|
/* Length valid ? */
|
|
len = bus_space_read_2(bst, bsh, BMPR_FIFO);
|
|
|
|
if (len > (ETHER_MAX_LEN - ETHER_CRC_LEN) || len < ETHER_HDR_LEN) {
|
|
ifp->if_ierrors++;
|
|
mb86950_drain_fifo(sc);
|
|
continue;
|
|
}
|
|
|
|
if (mb86950_get_fifo(sc, len) != 0) {
|
|
/* No mbufs? Drop packet. */
|
|
ifp->if_ierrors++;
|
|
mb86950_drain_fifo(sc);
|
|
return;
|
|
}
|
|
|
|
/* Successfully received a packet. Update stat. */
|
|
ifp->if_ipackets++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Receive packet.
|
|
* Retrieve packet from receive buffer and send to the next level up via
|
|
* ether_input(). If there is a BPF listener, give a copy to BPF, too.
|
|
* Returns 0 if success, -1 if error (i.e., mbuf allocation failure).
|
|
*/
|
|
int
|
|
mb86950_get_fifo(sc, len)
|
|
struct mb86950_softc *sc;
|
|
u_int len;
|
|
{
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
struct ifnet *ifp = &sc->sc_ec.ec_if;
|
|
struct mbuf *m;
|
|
|
|
/* Allocate a header mbuf. */
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == 0)
|
|
return (-1);
|
|
|
|
/*
|
|
* Round len to even value.
|
|
*/
|
|
if (len & 1)
|
|
len++;
|
|
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = len;
|
|
|
|
/* The following silliness is to make NFS happy. */
|
|
#define EROUND ((sizeof(struct ether_header) + 3) & ~3)
|
|
#define EOFF (EROUND - sizeof(struct ether_header))
|
|
|
|
/*
|
|
* Our strategy has one more problem. There is a policy on
|
|
* mbuf cluster allocation. It says that we must have at
|
|
* least MINCLSIZE (208 bytes) to allocate a cluster. For a
|
|
* packet of a size between (MHLEN - 2) to (MINCLSIZE - 2),
|
|
* our code violates the rule...
|
|
* On the other hand, the current code is short, simple,
|
|
* and fast, however. It does no harmful thing, just wastes
|
|
* some memory. Any comments? FIXME.
|
|
*/
|
|
|
|
/* Attach a cluster if this packet doesn't fit in a normal mbuf. */
|
|
if (len > MHLEN - EOFF) {
|
|
MCLGET(m, M_DONTWAIT);
|
|
if ((m->m_flags & M_EXT) == 0) {
|
|
m_freem(m);
|
|
return (-1);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The following assumes there is room for the ether header in the
|
|
* header mbuf.
|
|
*/
|
|
m->m_data += EOFF;
|
|
|
|
/* Set the length of this packet. */
|
|
m->m_len = len;
|
|
|
|
/* Get a packet. */
|
|
bus_space_read_multi_stream_2(bst, bsh, BMPR_FIFO, mtod(m, u_int16_t *), (len + 1) >> 1);
|
|
|
|
#if NBPFILTER > 0
|
|
/*
|
|
* Check if there's a BPF listener on this interface. If so, hand off
|
|
* the raw packet to bpf.
|
|
*/
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp->if_bpf, m);
|
|
#endif
|
|
|
|
(*ifp->if_input)(ifp, m);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Enable power on the interface.
|
|
*/
|
|
int
|
|
mb86950_enable(sc)
|
|
struct mb86950_softc *sc;
|
|
{
|
|
|
|
if ((sc->sc_stat & ESTAR_STAT_ENABLED) == 0 && sc->sc_enable != NULL) {
|
|
if ((*sc->sc_enable)(sc) != 0) {
|
|
printf("%s: device enable failed\n",
|
|
sc->sc_dev.dv_xname);
|
|
return (EIO);
|
|
}
|
|
}
|
|
|
|
sc->sc_stat |= ESTAR_STAT_ENABLED;
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Disable power on the interface.
|
|
*/
|
|
void
|
|
mb86950_disable(sc)
|
|
struct mb86950_softc *sc;
|
|
{
|
|
|
|
if ((sc->sc_stat & ESTAR_STAT_ENABLED) != 0 && sc->sc_disable != NULL) {
|
|
(*sc->sc_disable)(sc);
|
|
sc->sc_stat &= ~ESTAR_STAT_ENABLED;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* mbe_activate:
|
|
*
|
|
* Handle device activation/deactivation requests.
|
|
*/
|
|
int
|
|
mb86950_activate(self, act)
|
|
struct device *self;
|
|
enum devact act;
|
|
{
|
|
struct mb86950_softc *sc = (struct mb86950_softc *)self;
|
|
int rv, s;
|
|
|
|
rv = 0;
|
|
s = splnet();
|
|
switch (act) {
|
|
case DVACT_ACTIVATE:
|
|
rv = EOPNOTSUPP;
|
|
break;
|
|
|
|
case DVACT_DEACTIVATE:
|
|
if_deactivate(&sc->sc_ec.ec_if);
|
|
break;
|
|
}
|
|
splx(s);
|
|
return (rv);
|
|
}
|
|
|
|
/*
|
|
* mb86950_detach:
|
|
*
|
|
* Detach a mb86950 interface.
|
|
*/
|
|
int
|
|
mb86950_detach(sc)
|
|
struct mb86950_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->sc_ec.ec_if;
|
|
|
|
/* Succeed now if there's no work to do. */
|
|
if ((sc->sc_stat & ESTAR_STAT_ATTACHED) == 0)
|
|
return (0);
|
|
|
|
/* Delete all media. */
|
|
ifmedia_delete_instance(&sc->sc_media, IFM_INST_ANY);
|
|
|
|
#if NRND > 0
|
|
/* Unhook the entropy source. */
|
|
rnd_detach_source(&sc->rnd_source);
|
|
#endif
|
|
ether_ifdetach(ifp);
|
|
if_detach(ifp);
|
|
|
|
return (0);
|
|
}
|
|
|
|
#if ESTAR_DEBUG >= 1
|
|
void
|
|
mb86950_dump(level, sc)
|
|
int level;
|
|
struct mb86950_softc *sc;
|
|
{
|
|
bus_space_tag_t bst = sc->sc_bst;
|
|
bus_space_handle_t bsh = sc->sc_bsh;
|
|
|
|
log(level, "\tDLCR = %02x %02x %02x %02x %02x %02x %02x\n",
|
|
bus_space_read_1(bst, bsh, DLCR_TX_STAT),
|
|
bus_space_read_1(bst, bsh, DLCR_TX_INT_EN),
|
|
bus_space_read_1(bst, bsh, DLCR_RX_STAT),
|
|
bus_space_read_1(bst, bsh, DLCR_RX_INT_EN),
|
|
bus_space_read_1(bst, bsh, DLCR_TX_MODE),
|
|
bus_space_read_1(bst, bsh, DLCR_RX_MODE),
|
|
bus_space_read_1(bst, bsh, DLCR_CONFIG));
|
|
|
|
/* XXX BMPR2, 4 write only ?
|
|
log(level, "\tBMPR = xxxx %04x %04x\n",
|
|
bus_space_read_2(bst, bsh, BMPR_TX_LENGTH),
|
|
bus_space_read_2(bst, bsh, BMPR_DMA));
|
|
*/
|
|
}
|
|
#endif
|