NetBSD/sys/arch/sgimips/dev/imc.c

205 lines
5.8 KiB
C

/* $NetBSD: imc.c,v 1.8 2003/01/01 02:10:08 thorpej Exp $ */
/*
* Copyright (c) 2001 Rafal K. Boni
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <machine/cpu.h>
#include <machine/locore.h>
#include <machine/autoconf.h>
#include <machine/bus.h>
#include <machine/machtype.h>
#include <sgimips/dev/imcreg.h>
#include "locators.h"
struct imc_softc {
struct device sc_dev;
int eisa_present : 1;
};
static int imc_match(struct device *, struct cfdata *, void *);
static void imc_attach(struct device *, struct device *, void *);
static int imc_print(void *, const char *);
CFATTACH_DECL(imc, sizeof(struct imc_softc),
imc_match, imc_attach, NULL, NULL);
struct imc_attach_args {
const char* iaa_name;
bus_space_tag_t iaa_st;
bus_space_handle_t iaa_sh;
/* ? */
long iaa_offset;
int iaa_intr;
#if 0
int iaa_stride;
#endif
};
static int
imc_match(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
/*
* The IMC is an INDY/INDIGO2 thing.
*/
if (mach_type != MACH_SGI_IP22)
return (0);
/* Make sure it's actually there and readable */
if (badaddr((void*)MIPS_PHYS_TO_KSEG1(IMC_SYSID), sizeof(u_int32_t)))
return (0);
return (1);
}
static void
imc_attach(parent, self, aux)
struct device *parent;
struct device *self;
void *aux;
{
u_int32_t reg;
struct imc_attach_args iaa;
struct imc_softc *isc = (void *) self;
u_int32_t sysid = *(volatile u_int32_t *)MIPS_PHYS_TO_KSEG1(IMC_SYSID);
/* EISA present bit is on even on Indys, so don't trust it! */
if (mach_subtype == MACH_SGI_IP22_FULLHOUSE)
isc->eisa_present = (sysid & IMC_SYSID_HAVEISA);
else
isc->eisa_present = 0;
printf("\nimc0: Revision %d", (sysid & IMC_SYSID_REVMASK));
if (isc->eisa_present)
printf(", EISA bus present");
printf("\n");
/* Clear CPU/GIO error status registers to clear any leftover bits. */
*(volatile u_int32_t *)MIPS_PHYS_TO_KSEG1(IMC_CPU_ERRSTAT) = 0;
*(volatile u_int32_t *)MIPS_PHYS_TO_KSEG1(IMC_GIO_ERRSTAT) = 0;
/*
* Enable parity reporting on GIO/main memory transactions.
* Disable parity checking on CPU bus transactions (as turning
* it on seems to cause spurious bus errors), but enable parity
* checking on CPU reads from main memory (note that this bit
* has the opposite sense... Turning it on turns the checks off!).
* Finally, turn on interrupt writes to the CPU from the MC.
*/
reg = *(volatile u_int32_t *)MIPS_PHYS_TO_KSEG1(IMC_CPUCTRL0);
reg &= ~IMC_CPUCTRL0_NCHKMEMPAR;
reg |= (IMC_CPUCTRL0_GPR | IMC_CPUCTRL0_MPR | IMC_CPUCTRL0_INTENA);
*(volatile u_int32_t *)MIPS_PHYS_TO_KSEG1(IMC_CPUCTRL0) = reg;
/* Setup the MC write buffer depth */
reg = *(volatile u_int32_t *)MIPS_PHYS_TO_KSEG1(IMC_CPUCTRL1);
reg = (reg & ~IMC_CPUCTRL1_MCHWMSK) | 13;
*(volatile u_int32_t *)MIPS_PHYS_TO_KSEG1(IMC_CPUCTRL1) = reg;
/*
* Set GIO64 arbitrator configuration register:
*
* Preserve PROM-set graphics-related bits, as they seem to depend
* on the graphics variant present and I'm not sure how to figure
* that out or 100% sure what the correct settings are for each.
*/
reg = *(volatile u_int32_t *)MIPS_PHYS_TO_KSEG1(IMC_GIO64ARB);
reg &= (IMC_GIO64ARB_GRX64 | IMC_GIO64ARB_GRXRT | IMC_GIO64ARB_GRXMST);
/* GIO64 invariant for all IP22 platforms: one GIO bus, HPC1 @ 64 */
reg |= IMC_GIO64ARB_ONEGIO | IMC_GIO64ARB_HPC64;
/* Rest of settings are machine/board dependant */
switch (mach_subtype) {
case MACH_SGI_IP22_GUINESS:
/* EISA can bus-master, is 64-bit */
reg |= (IMC_GIO64ARB_EISAMST | IMC_GIO64ARB_EISA64);
break;
case MACH_SGI_IP22_FULLHOUSE:
/*
* All Fullhouse boards have a 64-bit HPC2 and pipelined
* EXP0 slot.
*/
reg |= (IMC_GIO64ARB_HPCEXP64 | IMC_GIO64ARB_EXP0PIPE);
if (mach_boardrev < 2) {
/* EXP0 realtime, EXP1 can master */
reg |= (IMC_GIO64ARB_EXP0RT | IMC_GIO64ARB_EXP1MST);
} else {
/* EXP1 pipelined as well, EISA masters */
reg |= (IMC_GIO64ARB_EXP1PIPE | IMC_GIO64ARB_EISAMST);
}
break;
}
*(volatile u_int32_t *)MIPS_PHYS_TO_KSEG1(IMC_GIO64ARB) = reg;
if (isc->eisa_present) {
#if notyet
memset(&iaa, 0, sizeof(iaa));
iaa.iaa_name = "eisa";
(void)config_found(self, (void*)&iaa, imc_print);
#endif
}
memset(&iaa, 0, sizeof(iaa));
iaa.iaa_name = "gio";
(void)config_found(self, (void*)&iaa, imc_print);
}
static int
imc_print(aux, name)
void *aux;
const char *name;
{
struct imc_attach_args* iaa = aux;
if (name)
aprint_normal("%s at %s", iaa->iaa_name, name);
return UNCONF;
}