NetBSD/sys/dev/pci/if_wm.c

2985 lines
74 KiB
C

/* $NetBSD: if_wm.c,v 1.27 2002/10/23 01:34:58 christos Exp $ */
/*
* Copyright (c) 2001, 2002 Wasabi Systems, Inc.
* All rights reserved.
*
* Written by Jason R. Thorpe for Wasabi Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed for the NetBSD Project by
* Wasabi Systems, Inc.
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
* or promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Device driver for the Intel i8254x family of Gigabit Ethernet chips.
*
* TODO (in order of importance):
*
* - Make GMII work on the i82543.
*
* - Fix hw VLAN assist.
*
* - Jumbo frames -- requires changes to network stack due to
* lame buffer length handling on chip.
*/
#include "bpfilter.h"
#include "rnd.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/callout.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/device.h>
#include <sys/queue.h>
#include <uvm/uvm_extern.h> /* for PAGE_SIZE */
#if NRND > 0
#include <sys/rnd.h>
#endif
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_ether.h>
#if NBPFILTER > 0
#include <net/bpf.h>
#endif
#include <netinet/in.h> /* XXX for struct ip */
#include <netinet/in_systm.h> /* XXX for struct ip */
#include <netinet/ip.h> /* XXX for struct ip */
#include <netinet/tcp.h> /* XXX for struct tcphdr */
#include <machine/bus.h>
#include <machine/intr.h>
#include <machine/endian.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/mii/mii_bitbang.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/if_wmreg.h>
#ifdef WM_DEBUG
#define WM_DEBUG_LINK 0x01
#define WM_DEBUG_TX 0x02
#define WM_DEBUG_RX 0x04
#define WM_DEBUG_GMII 0x08
int wm_debug = WM_DEBUG_TX|WM_DEBUG_RX|WM_DEBUG_LINK;
#define DPRINTF(x, y) if (wm_debug & (x)) printf y
#else
#define DPRINTF(x, y) /* nothing */
#endif /* WM_DEBUG */
/*
* Transmit descriptor list size. Due to errata, we can only have
* 256 hardware descriptors in the ring. We tell the upper layers
* that they can queue a lot of packets, and we go ahead and manage
* up to 64 of them at a time. We allow up to 16 DMA segments per
* packet.
*/
#define WM_NTXSEGS 16
#define WM_IFQUEUELEN 256
#define WM_TXQUEUELEN 64
#define WM_TXQUEUELEN_MASK (WM_TXQUEUELEN - 1)
#define WM_TXQUEUE_GC (WM_TXQUEUELEN / 8)
#define WM_NTXDESC 256
#define WM_NTXDESC_MASK (WM_NTXDESC - 1)
#define WM_NEXTTX(x) (((x) + 1) & WM_NTXDESC_MASK)
#define WM_NEXTTXS(x) (((x) + 1) & WM_TXQUEUELEN_MASK)
/*
* Receive descriptor list size. We have one Rx buffer for normal
* sized packets. Jumbo packets consume 5 Rx buffers for a full-sized
* packet. We allocate 256 receive descriptors, each with a 2k
* buffer (MCLBYTES), which gives us room for 50 jumbo packets.
*/
#define WM_NRXDESC 256
#define WM_NRXDESC_MASK (WM_NRXDESC - 1)
#define WM_NEXTRX(x) (((x) + 1) & WM_NRXDESC_MASK)
#define WM_PREVRX(x) (((x) - 1) & WM_NRXDESC_MASK)
/*
* Control structures are DMA'd to the i82542 chip. We allocate them in
* a single clump that maps to a single DMA segment to make serveral things
* easier.
*/
struct wm_control_data {
/*
* The transmit descriptors.
*/
wiseman_txdesc_t wcd_txdescs[WM_NTXDESC];
/*
* The receive descriptors.
*/
wiseman_rxdesc_t wcd_rxdescs[WM_NRXDESC];
};
#define WM_CDOFF(x) offsetof(struct wm_control_data, x)
#define WM_CDTXOFF(x) WM_CDOFF(wcd_txdescs[(x)])
#define WM_CDRXOFF(x) WM_CDOFF(wcd_rxdescs[(x)])
/*
* Software state for transmit jobs.
*/
struct wm_txsoft {
struct mbuf *txs_mbuf; /* head of our mbuf chain */
bus_dmamap_t txs_dmamap; /* our DMA map */
int txs_firstdesc; /* first descriptor in packet */
int txs_lastdesc; /* last descriptor in packet */
int txs_ndesc; /* # of descriptors used */
};
/*
* Software state for receive buffers. Each descriptor gets a
* 2k (MCLBYTES) buffer and a DMA map. For packets which fill
* more than one buffer, we chain them together.
*/
struct wm_rxsoft {
struct mbuf *rxs_mbuf; /* head of our mbuf chain */
bus_dmamap_t rxs_dmamap; /* our DMA map */
};
/*
* Software state per device.
*/
struct wm_softc {
struct device sc_dev; /* generic device information */
bus_space_tag_t sc_st; /* bus space tag */
bus_space_handle_t sc_sh; /* bus space handle */
bus_dma_tag_t sc_dmat; /* bus DMA tag */
struct ethercom sc_ethercom; /* ethernet common data */
void *sc_sdhook; /* shutdown hook */
int sc_type; /* chip type; see below */
int sc_flags; /* flags; see below */
void *sc_ih; /* interrupt cookie */
struct mii_data sc_mii; /* MII/media information */
struct callout sc_tick_ch; /* tick callout */
bus_dmamap_t sc_cddmamap; /* control data DMA map */
#define sc_cddma sc_cddmamap->dm_segs[0].ds_addr
/*
* Software state for the transmit and receive descriptors.
*/
struct wm_txsoft sc_txsoft[WM_TXQUEUELEN];
struct wm_rxsoft sc_rxsoft[WM_NRXDESC];
/*
* Control data structures.
*/
struct wm_control_data *sc_control_data;
#define sc_txdescs sc_control_data->wcd_txdescs
#define sc_rxdescs sc_control_data->wcd_rxdescs
#ifdef WM_EVENT_COUNTERS
/* Event counters. */
struct evcnt sc_ev_txsstall; /* Tx stalled due to no txs */
struct evcnt sc_ev_txdstall; /* Tx stalled due to no txd */
struct evcnt sc_ev_txforceintr; /* Tx interrupts forced */
struct evcnt sc_ev_txdw; /* Tx descriptor interrupts */
struct evcnt sc_ev_txqe; /* Tx queue empty interrupts */
struct evcnt sc_ev_rxintr; /* Rx interrupts */
struct evcnt sc_ev_linkintr; /* Link interrupts */
struct evcnt sc_ev_rxipsum; /* IP checksums checked in-bound */
struct evcnt sc_ev_rxtusum; /* TCP/UDP cksums checked in-bound */
struct evcnt sc_ev_txipsum; /* IP checksums comp. out-bound */
struct evcnt sc_ev_txtusum; /* TCP/UDP cksums comp. out-bound */
struct evcnt sc_ev_txctx_init; /* Tx cksum context cache initialized */
struct evcnt sc_ev_txctx_hit; /* Tx cksum context cache hit */
struct evcnt sc_ev_txctx_miss; /* Tx cksum context cache miss */
struct evcnt sc_ev_txseg[WM_NTXSEGS]; /* Tx packets w/ N segments */
struct evcnt sc_ev_txdrop; /* Tx packets dropped (too many segs) */
struct evcnt sc_ev_tu; /* Tx underrun */
#endif /* WM_EVENT_COUNTERS */
bus_addr_t sc_tdt_reg; /* offset of TDT register */
int sc_txfree; /* number of free Tx descriptors */
int sc_txnext; /* next ready Tx descriptor */
int sc_txsfree; /* number of free Tx jobs */
int sc_txsnext; /* next free Tx job */
int sc_txsdirty; /* dirty Tx jobs */
uint32_t sc_txctx_ipcs; /* cached Tx IP cksum ctx */
uint32_t sc_txctx_tucs; /* cached Tx TCP/UDP cksum ctx */
bus_addr_t sc_rdt_reg; /* offset of RDT register */
int sc_rxptr; /* next ready Rx descriptor/queue ent */
int sc_rxdiscard;
int sc_rxlen;
struct mbuf *sc_rxhead;
struct mbuf *sc_rxtail;
struct mbuf **sc_rxtailp;
uint32_t sc_ctrl; /* prototype CTRL register */
#if 0
uint32_t sc_ctrl_ext; /* prototype CTRL_EXT register */
#endif
uint32_t sc_icr; /* prototype interrupt bits */
uint32_t sc_tctl; /* prototype TCTL register */
uint32_t sc_rctl; /* prototype RCTL register */
uint32_t sc_txcw; /* prototype TXCW register */
uint32_t sc_tipg; /* prototype TIPG register */
int sc_tbi_linkup; /* TBI link status */
int sc_tbi_anstate; /* autonegotiation state */
int sc_mchash_type; /* multicast filter offset */
#if NRND > 0
rndsource_element_t rnd_source; /* random source */
#endif
};
#define WM_RXCHAIN_RESET(sc) \
do { \
(sc)->sc_rxtailp = &(sc)->sc_rxhead; \
*(sc)->sc_rxtailp = NULL; \
(sc)->sc_rxlen = 0; \
} while (/*CONSTCOND*/0)
#define WM_RXCHAIN_LINK(sc, m) \
do { \
*(sc)->sc_rxtailp = (sc)->sc_rxtail = (m); \
(sc)->sc_rxtailp = &(m)->m_next; \
} while (/*CONSTCOND*/0)
/* sc_type */
#define WM_T_82542_2_0 0 /* i82542 2.0 (really old) */
#define WM_T_82542_2_1 1 /* i82542 2.1+ (old) */
#define WM_T_82543 2 /* i82543 */
#define WM_T_82544 3 /* i82544 */
#define WM_T_82540 4 /* i82540 */
#define WM_T_82545 5 /* i82545 */
#define WM_T_82546 6 /* i82546 */
/* sc_flags */
#define WM_F_HAS_MII 0x01 /* has MII */
#define WM_F_EEPROM_HANDSHAKE 0x02 /* requires EEPROM handshake */
#ifdef WM_EVENT_COUNTERS
#define WM_EVCNT_INCR(ev) (ev)->ev_count++
#else
#define WM_EVCNT_INCR(ev) /* nothing */
#endif
#define CSR_READ(sc, reg) \
bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg))
#define CSR_WRITE(sc, reg, val) \
bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val))
#define WM_CDTXADDR(sc, x) ((sc)->sc_cddma + WM_CDTXOFF((x)))
#define WM_CDRXADDR(sc, x) ((sc)->sc_cddma + WM_CDRXOFF((x)))
#define WM_CDTXSYNC(sc, x, n, ops) \
do { \
int __x, __n; \
\
__x = (x); \
__n = (n); \
\
/* If it will wrap around, sync to the end of the ring. */ \
if ((__x + __n) > WM_NTXDESC) { \
bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
WM_CDTXOFF(__x), sizeof(wiseman_txdesc_t) * \
(WM_NTXDESC - __x), (ops)); \
__n -= (WM_NTXDESC - __x); \
__x = 0; \
} \
\
/* Now sync whatever is left. */ \
bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
WM_CDTXOFF(__x), sizeof(wiseman_txdesc_t) * __n, (ops)); \
} while (/*CONSTCOND*/0)
#define WM_CDRXSYNC(sc, x, ops) \
do { \
bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
WM_CDRXOFF((x)), sizeof(wiseman_rxdesc_t), (ops)); \
} while (/*CONSTCOND*/0)
#define WM_INIT_RXDESC(sc, x) \
do { \
struct wm_rxsoft *__rxs = &(sc)->sc_rxsoft[(x)]; \
wiseman_rxdesc_t *__rxd = &(sc)->sc_rxdescs[(x)]; \
struct mbuf *__m = __rxs->rxs_mbuf; \
\
/* \
* Note: We scoot the packet forward 2 bytes in the buffer \
* so that the payload after the Ethernet header is aligned \
* to a 4-byte boundary. \
* \
* XXX BRAINDAMAGE ALERT! \
* The stupid chip uses the same size for every buffer, which \
* is set in the Receive Control register. We are using the 2K \
* size option, but what we REALLY want is (2K - 2)! For this \
* reason, we can't accept packets longer than the standard \
* Ethernet MTU, without incurring a big penalty to copy every \
* incoming packet to a new, suitably aligned buffer. \
* \
* We'll need to make some changes to the layer 3/4 parts of \
* the stack (to copy the headers to a new buffer if not \
* aligned) in order to support large MTU on this chip. Lame. \
*/ \
__m->m_data = __m->m_ext.ext_buf + 2; \
\
__rxd->wrx_addr.wa_low = \
htole32(__rxs->rxs_dmamap->dm_segs[0].ds_addr + 2); \
__rxd->wrx_addr.wa_high = 0; \
__rxd->wrx_len = 0; \
__rxd->wrx_cksum = 0; \
__rxd->wrx_status = 0; \
__rxd->wrx_errors = 0; \
__rxd->wrx_special = 0; \
WM_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); \
\
CSR_WRITE((sc), (sc)->sc_rdt_reg, (x)); \
} while (/*CONSTCOND*/0)
void wm_start(struct ifnet *);
void wm_watchdog(struct ifnet *);
int wm_ioctl(struct ifnet *, u_long, caddr_t);
int wm_init(struct ifnet *);
void wm_stop(struct ifnet *, int);
void wm_shutdown(void *);
void wm_reset(struct wm_softc *);
void wm_rxdrain(struct wm_softc *);
int wm_add_rxbuf(struct wm_softc *, int);
void wm_read_eeprom(struct wm_softc *, int, int, u_int16_t *);
void wm_tick(void *);
void wm_set_filter(struct wm_softc *);
int wm_intr(void *);
void wm_txintr(struct wm_softc *);
void wm_rxintr(struct wm_softc *);
void wm_linkintr(struct wm_softc *, uint32_t);
void wm_tbi_mediainit(struct wm_softc *);
int wm_tbi_mediachange(struct ifnet *);
void wm_tbi_mediastatus(struct ifnet *, struct ifmediareq *);
void wm_tbi_set_linkled(struct wm_softc *);
void wm_tbi_check_link(struct wm_softc *);
void wm_gmii_reset(struct wm_softc *);
int wm_gmii_i82543_readreg(struct device *, int, int);
void wm_gmii_i82543_writereg(struct device *, int, int, int);
int wm_gmii_i82544_readreg(struct device *, int, int);
void wm_gmii_i82544_writereg(struct device *, int, int, int);
void wm_gmii_statchg(struct device *);
void wm_gmii_mediainit(struct wm_softc *);
int wm_gmii_mediachange(struct ifnet *);
void wm_gmii_mediastatus(struct ifnet *, struct ifmediareq *);
int wm_match(struct device *, struct cfdata *, void *);
void wm_attach(struct device *, struct device *, void *);
int wm_copy_small = 0;
CFATTACH_DECL(wm, sizeof(struct wm_softc),
wm_match, wm_attach, NULL, NULL);
/*
* Devices supported by this driver.
*/
const struct wm_product {
pci_vendor_id_t wmp_vendor;
pci_product_id_t wmp_product;
const char *wmp_name;
int wmp_type;
int wmp_flags;
#define WMP_F_1000X 0x01
#define WMP_F_1000T 0x02
} wm_products[] = {
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82542,
"Intel i82542 1000BASE-X Ethernet",
WM_T_82542_2_1, WMP_F_1000X },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82543GC_FIBER,
"Intel i82543GC 1000BASE-X Ethernet",
WM_T_82543, WMP_F_1000X },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82543GC_COPPER,
"Intel i82543GC 1000BASE-T Ethernet",
WM_T_82543, WMP_F_1000T },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544EI_COPPER,
"Intel i82544EI 1000BASE-T Ethernet",
WM_T_82544, WMP_F_1000T },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544EI_FIBER,
"Intel i82544EI 1000BASE-X Ethernet",
WM_T_82544, WMP_F_1000X },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544GC_COPPER,
"Intel i82544GC 1000BASE-T Ethernet",
WM_T_82544, WMP_F_1000T },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544GC_LOM,
"Intel i82544GC (LOM) 1000BASE-T Ethernet",
WM_T_82544, WMP_F_1000T },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EM,
"Intel i82540EM 1000BASE-T Ethernet",
WM_T_82540, WMP_F_1000T },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545EM_COPPER,
"Intel i82545EM 1000BASE-T Ethernet",
WM_T_82545, WMP_F_1000T },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546EB_COPPER,
"Intel i82546EB 1000BASE-T Ethernet",
WM_T_82546, WMP_F_1000T },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545EM_FIBER,
"Intel i82545EM 1000BASE-X Ethernet",
WM_T_82545, WMP_F_1000X },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546EB_FIBER,
"Intel i82546EB 1000BASE-X Ethernet",
WM_T_82546, WMP_F_1000X },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EM_LOM,
"Intel i82540EM (LOM) 1000BASE-T Ethernet",
WM_T_82540, WMP_F_1000T },
{ 0, 0,
NULL,
0, 0 },
};
#ifdef WM_EVENT_COUNTERS
#if WM_NTXSEGS != 16
#error Update wm_txseg_evcnt_names
#endif
static const char *wm_txseg_evcnt_names[WM_NTXSEGS] = {
"txseg1",
"txseg2",
"txseg3",
"txseg4",
"txseg5",
"txseg6",
"txseg7",
"txseg8",
"txseg9",
"txseg10",
"txseg11",
"txseg12",
"txseg13",
"txseg14",
"txseg15",
"txseg16",
};
#endif /* WM_EVENT_COUNTERS */
static const struct wm_product *
wm_lookup(const struct pci_attach_args *pa)
{
const struct wm_product *wmp;
for (wmp = wm_products; wmp->wmp_name != NULL; wmp++) {
if (PCI_VENDOR(pa->pa_id) == wmp->wmp_vendor &&
PCI_PRODUCT(pa->pa_id) == wmp->wmp_product)
return (wmp);
}
return (NULL);
}
int
wm_match(struct device *parent, struct cfdata *cf, void *aux)
{
struct pci_attach_args *pa = aux;
if (wm_lookup(pa) != NULL)
return (1);
return (0);
}
void
wm_attach(struct device *parent, struct device *self, void *aux)
{
struct wm_softc *sc = (void *) self;
struct pci_attach_args *pa = aux;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
pci_chipset_tag_t pc = pa->pa_pc;
pci_intr_handle_t ih;
const char *intrstr = NULL;
bus_space_tag_t memt;
bus_space_handle_t memh;
bus_dma_segment_t seg;
int memh_valid;
int i, rseg, error;
const struct wm_product *wmp;
uint8_t enaddr[ETHER_ADDR_LEN];
uint16_t myea[ETHER_ADDR_LEN / 2], cfg1, cfg2, swdpin;
pcireg_t preg, memtype;
int pmreg;
callout_init(&sc->sc_tick_ch);
wmp = wm_lookup(pa);
if (wmp == NULL) {
printf("\n");
panic("wm_attach: impossible");
}
sc->sc_dmat = pa->pa_dmat;
preg = PCI_REVISION(pci_conf_read(pc, pa->pa_tag, PCI_CLASS_REG));
printf(": %s, rev. %d\n", wmp->wmp_name, preg);
sc->sc_type = wmp->wmp_type;
if (sc->sc_type < WM_T_82543) {
if (preg < 2) {
printf("%s: i82542 must be at least rev. 2\n",
sc->sc_dev.dv_xname);
return;
}
if (preg < 3)
sc->sc_type = WM_T_82542_2_0;
}
/*
* Some chips require a handshake to access the EEPROM.
*/
if (sc->sc_type >= WM_T_82540)
sc->sc_flags |= WM_F_EEPROM_HANDSHAKE;
/*
* Map the device.
*/
memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, WM_PCI_MMBA);
switch (memtype) {
case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT:
case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT:
memh_valid = (pci_mapreg_map(pa, WM_PCI_MMBA,
memtype, 0, &memt, &memh, NULL, NULL) == 0);
break;
default:
memh_valid = 0;
}
if (memh_valid) {
sc->sc_st = memt;
sc->sc_sh = memh;
} else {
printf("%s: unable to map device registers\n",
sc->sc_dev.dv_xname);
return;
}
/* Enable bus mastering. Disable MWI on the i82542 2.0. */
preg = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
preg |= PCI_COMMAND_MASTER_ENABLE;
if (sc->sc_type < WM_T_82542_2_1)
preg &= ~PCI_COMMAND_INVALIDATE_ENABLE;
pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, preg);
/* Get it out of power save mode, if needed. */
if (pci_get_capability(pc, pa->pa_tag, PCI_CAP_PWRMGMT, &pmreg, 0)) {
preg = pci_conf_read(pc, pa->pa_tag, pmreg + 4) & 0x3;
if (preg == 3) {
/*
* The card has lost all configuration data in
* this state, so punt.
*/
printf("%s: unable to wake from power state D3\n",
sc->sc_dev.dv_xname);
return;
}
if (preg != 0) {
printf("%s: waking up from power state D%d\n",
sc->sc_dev.dv_xname, preg);
pci_conf_write(pc, pa->pa_tag, pmreg + 4, 0);
}
}
/*
* Map and establish our interrupt.
*/
if (pci_intr_map(pa, &ih)) {
printf("%s: unable to map interrupt\n", sc->sc_dev.dv_xname);
return;
}
intrstr = pci_intr_string(pc, ih);
sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, wm_intr, sc);
if (sc->sc_ih == NULL) {
printf("%s: unable to establish interrupt",
sc->sc_dev.dv_xname);
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
return;
}
printf("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr);
/*
* Allocate the control data structures, and create and load the
* DMA map for it.
*/
if ((error = bus_dmamem_alloc(sc->sc_dmat,
sizeof(struct wm_control_data), PAGE_SIZE, 0, &seg, 1, &rseg,
0)) != 0) {
printf("%s: unable to allocate control data, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail_0;
}
if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
sizeof(struct wm_control_data), (caddr_t *)&sc->sc_control_data,
0)) != 0) {
printf("%s: unable to map control data, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail_1;
}
if ((error = bus_dmamap_create(sc->sc_dmat,
sizeof(struct wm_control_data), 1,
sizeof(struct wm_control_data), 0, 0, &sc->sc_cddmamap)) != 0) {
printf("%s: unable to create control data DMA map, "
"error = %d\n", sc->sc_dev.dv_xname, error);
goto fail_2;
}
if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap,
sc->sc_control_data, sizeof(struct wm_control_data), NULL,
0)) != 0) {
printf("%s: unable to load control data DMA map, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail_3;
}
/*
* Create the transmit buffer DMA maps.
*/
for (i = 0; i < WM_TXQUEUELEN; i++) {
if ((error = bus_dmamap_create(sc->sc_dmat, ETHER_MAX_LEN_JUMBO,
WM_NTXSEGS, MCLBYTES, 0, 0,
&sc->sc_txsoft[i].txs_dmamap)) != 0) {
printf("%s: unable to create Tx DMA map %d, "
"error = %d\n", sc->sc_dev.dv_xname, i, error);
goto fail_4;
}
}
/*
* Create the receive buffer DMA maps.
*/
for (i = 0; i < WM_NRXDESC; i++) {
if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) {
printf("%s: unable to create Rx DMA map %d, "
"error = %d\n", sc->sc_dev.dv_xname, i, error);
goto fail_5;
}
sc->sc_rxsoft[i].rxs_mbuf = NULL;
}
/*
* Reset the chip to a known state.
*/
wm_reset(sc);
/*
* Read the Ethernet address from the EEPROM.
*/
wm_read_eeprom(sc, EEPROM_OFF_MACADDR,
sizeof(myea) / sizeof(myea[0]), myea);
enaddr[0] = myea[0] & 0xff;
enaddr[1] = myea[0] >> 8;
enaddr[2] = myea[1] & 0xff;
enaddr[3] = myea[1] >> 8;
enaddr[4] = myea[2] & 0xff;
enaddr[5] = myea[2] >> 8;
/*
* Toggle the LSB of the MAC address on the second port
* of the i82546.
*/
if (sc->sc_type == WM_T_82546) {
if ((CSR_READ(sc, WMREG_STATUS) >> STATUS_FUNCID_SHIFT) & 1)
enaddr[5] ^= 1;
}
printf("%s: Ethernet address %s\n", sc->sc_dev.dv_xname,
ether_sprintf(enaddr));
/*
* Read the config info from the EEPROM, and set up various
* bits in the control registers based on their contents.
*/
wm_read_eeprom(sc, EEPROM_OFF_CFG1, 1, &cfg1);
wm_read_eeprom(sc, EEPROM_OFF_CFG2, 1, &cfg2);
if (sc->sc_type >= WM_T_82544)
wm_read_eeprom(sc, EEPROM_OFF_SWDPIN, 1, &swdpin);
if (cfg1 & EEPROM_CFG1_ILOS)
sc->sc_ctrl |= CTRL_ILOS;
if (sc->sc_type >= WM_T_82544) {
sc->sc_ctrl |=
((swdpin >> EEPROM_SWDPIN_SWDPIO_SHIFT) & 0xf) <<
CTRL_SWDPIO_SHIFT;
sc->sc_ctrl |=
((swdpin >> EEPROM_SWDPIN_SWDPIN_SHIFT) & 0xf) <<
CTRL_SWDPINS_SHIFT;
} else {
sc->sc_ctrl |=
((cfg1 >> EEPROM_CFG1_SWDPIO_SHIFT) & 0xf) <<
CTRL_SWDPIO_SHIFT;
}
#if 0
if (sc->sc_type >= WM_T_82544) {
if (cfg1 & EEPROM_CFG1_IPS0)
sc->sc_ctrl_ext |= CTRL_EXT_IPS;
if (cfg1 & EEPROM_CFG1_IPS1)
sc->sc_ctrl_ext |= CTRL_EXT_IPS1;
sc->sc_ctrl_ext |=
((swdpin >> (EEPROM_SWDPIN_SWDPIO_SHIFT + 4)) & 0xd) <<
CTRL_EXT_SWDPIO_SHIFT;
sc->sc_ctrl_ext |=
((swdpin >> (EEPROM_SWDPIN_SWDPIN_SHIFT + 4)) & 0xd) <<
CTRL_EXT_SWDPINS_SHIFT;
} else {
sc->sc_ctrl_ext |=
((cfg2 >> EEPROM_CFG2_SWDPIO_SHIFT) & 0xf) <<
CTRL_EXT_SWDPIO_SHIFT;
}
#endif
CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl);
#if 0
CSR_WRITE(sc, WMREG_CTRL_EXT, sc->sc_ctrl_ext);
#endif
/*
* Set up some register offsets that are different between
* the i82542 and the i82543 and later chips.
*/
if (sc->sc_type < WM_T_82543) {
sc->sc_rdt_reg = WMREG_OLD_RDT0;
sc->sc_tdt_reg = WMREG_OLD_TDT;
} else {
sc->sc_rdt_reg = WMREG_RDT;
sc->sc_tdt_reg = WMREG_TDT;
}
/*
* Determine if we should use flow control. We should
* always use it, unless we're on a i82542 < 2.1.
*/
if (sc->sc_type >= WM_T_82542_2_1)
sc->sc_ctrl |= CTRL_TFCE | CTRL_RFCE;
/*
* Determine if we're TBI or GMII mode, and initialize the
* media structures accordingly.
*/
if (sc->sc_type < WM_T_82543 ||
(CSR_READ(sc, WMREG_STATUS) & STATUS_TBIMODE) != 0) {
if (wmp->wmp_flags & WMP_F_1000T)
printf("%s: WARNING: TBIMODE set on 1000BASE-T "
"product!\n", sc->sc_dev.dv_xname);
wm_tbi_mediainit(sc);
} else {
if (wmp->wmp_flags & WMP_F_1000X)
printf("%s: WARNING: TBIMODE clear on 1000BASE-X "
"product!\n", sc->sc_dev.dv_xname);
wm_gmii_mediainit(sc);
}
ifp = &sc->sc_ethercom.ec_if;
strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = wm_ioctl;
ifp->if_start = wm_start;
ifp->if_watchdog = wm_watchdog;
ifp->if_init = wm_init;
ifp->if_stop = wm_stop;
IFQ_SET_MAXLEN(&ifp->if_snd, WM_IFQUEUELEN);
IFQ_SET_READY(&ifp->if_snd);
/*
* If we're a i82543 or greater, we can support VLANs.
*/
if (sc->sc_type >= WM_T_82543)
sc->sc_ethercom.ec_capabilities |=
ETHERCAP_VLAN_MTU /* XXXJRT | ETHERCAP_VLAN_HWTAGGING */;
/*
* We can perform TCPv4 and UDPv4 checkums in-bound. Only
* on i82543 and later.
*/
if (sc->sc_type >= WM_T_82543)
ifp->if_capabilities |=
IFCAP_CSUM_IPv4 | IFCAP_CSUM_TCPv4 | IFCAP_CSUM_UDPv4;
/*
* Attach the interface.
*/
if_attach(ifp);
ether_ifattach(ifp, enaddr);
#if NRND > 0
rnd_attach_source(&sc->rnd_source, sc->sc_dev.dv_xname,
RND_TYPE_NET, 0);
#endif
#ifdef WM_EVENT_COUNTERS
/* Attach event counters. */
evcnt_attach_dynamic(&sc->sc_ev_txsstall, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "txsstall");
evcnt_attach_dynamic(&sc->sc_ev_txdstall, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "txdstall");
evcnt_attach_dynamic(&sc->sc_ev_txforceintr, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "txforceintr");
evcnt_attach_dynamic(&sc->sc_ev_txdw, EVCNT_TYPE_INTR,
NULL, sc->sc_dev.dv_xname, "txdw");
evcnt_attach_dynamic(&sc->sc_ev_txqe, EVCNT_TYPE_INTR,
NULL, sc->sc_dev.dv_xname, "txqe");
evcnt_attach_dynamic(&sc->sc_ev_rxintr, EVCNT_TYPE_INTR,
NULL, sc->sc_dev.dv_xname, "rxintr");
evcnt_attach_dynamic(&sc->sc_ev_linkintr, EVCNT_TYPE_INTR,
NULL, sc->sc_dev.dv_xname, "linkintr");
evcnt_attach_dynamic(&sc->sc_ev_rxipsum, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "rxipsum");
evcnt_attach_dynamic(&sc->sc_ev_rxtusum, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "rxtusum");
evcnt_attach_dynamic(&sc->sc_ev_txipsum, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "txipsum");
evcnt_attach_dynamic(&sc->sc_ev_txtusum, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "txtusum");
evcnt_attach_dynamic(&sc->sc_ev_txctx_init, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "txctx init");
evcnt_attach_dynamic(&sc->sc_ev_txctx_hit, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "txctx hit");
evcnt_attach_dynamic(&sc->sc_ev_txctx_miss, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "txctx miss");
for (i = 0; i < WM_NTXSEGS; i++)
evcnt_attach_dynamic(&sc->sc_ev_txseg[i], EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, wm_txseg_evcnt_names[i]);
evcnt_attach_dynamic(&sc->sc_ev_txdrop, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "txdrop");
evcnt_attach_dynamic(&sc->sc_ev_tu, EVCNT_TYPE_MISC,
NULL, sc->sc_dev.dv_xname, "tu");
#endif /* WM_EVENT_COUNTERS */
/*
* Make sure the interface is shutdown during reboot.
*/
sc->sc_sdhook = shutdownhook_establish(wm_shutdown, sc);
if (sc->sc_sdhook == NULL)
printf("%s: WARNING: unable to establish shutdown hook\n",
sc->sc_dev.dv_xname);
return;
/*
* Free any resources we've allocated during the failed attach
* attempt. Do this in reverse order and fall through.
*/
fail_5:
for (i = 0; i < WM_NRXDESC; i++) {
if (sc->sc_rxsoft[i].rxs_dmamap != NULL)
bus_dmamap_destroy(sc->sc_dmat,
sc->sc_rxsoft[i].rxs_dmamap);
}
fail_4:
for (i = 0; i < WM_TXQUEUELEN; i++) {
if (sc->sc_txsoft[i].txs_dmamap != NULL)
bus_dmamap_destroy(sc->sc_dmat,
sc->sc_txsoft[i].txs_dmamap);
}
bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap);
fail_3:
bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap);
fail_2:
bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data,
sizeof(struct wm_control_data));
fail_1:
bus_dmamem_free(sc->sc_dmat, &seg, rseg);
fail_0:
return;
}
/*
* wm_shutdown:
*
* Make sure the interface is stopped at reboot time.
*/
void
wm_shutdown(void *arg)
{
struct wm_softc *sc = arg;
wm_stop(&sc->sc_ethercom.ec_if, 1);
}
/*
* wm_tx_cksum:
*
* Set up TCP/IP checksumming parameters for the
* specified packet.
*/
static int
wm_tx_cksum(struct wm_softc *sc, struct wm_txsoft *txs, uint32_t *cmdp,
uint32_t *fieldsp)
{
struct mbuf *m0 = txs->txs_mbuf;
struct livengood_tcpip_ctxdesc *t;
uint32_t fields = 0, ipcs, tucs;
struct ip *ip;
struct ether_header *eh;
int offset, iphl;
/*
* XXX It would be nice if the mbuf pkthdr had offset
* fields for the protocol headers.
*/
eh = mtod(m0, struct ether_header *);
switch (htons(eh->ether_type)) {
case ETHERTYPE_IP:
iphl = sizeof(struct ip);
offset = ETHER_HDR_LEN;
break;
default:
/*
* Don't support this protocol or encapsulation.
*/
*fieldsp = 0;
*cmdp = 0;
return (0);
}
/* XXX */
if (m0->m_len < (offset + iphl)) {
printf("%s: wm_tx_cksum: need to m_pullup, "
"packet dropped\n", sc->sc_dev.dv_xname);
return (EINVAL);
}
ip = (struct ip *) (mtod(m0, caddr_t) + offset);
iphl = ip->ip_hl << 2;
/*
* NOTE: Even if we're not using the IP or TCP/UDP checksum
* offload feature, if we load the context descriptor, we
* MUST provide valid values for IPCSS and TUCSS fields.
*/
if (m0->m_pkthdr.csum_flags & M_CSUM_IPv4) {
WM_EVCNT_INCR(&sc->sc_ev_txipsum);
fields |= htole32(WTX_IXSM);
ipcs = htole32(WTX_TCPIP_IPCSS(offset) |
WTX_TCPIP_IPCSO(offset + offsetof(struct ip, ip_sum)) |
WTX_TCPIP_IPCSE(offset + iphl - 1));
} else if (__predict_true(sc->sc_txctx_ipcs != 0xffffffff)) {
/* Use the cached value. */
ipcs = sc->sc_txctx_ipcs;
} else {
/* Just initialize it to the likely value anyway. */
ipcs = htole32(WTX_TCPIP_IPCSS(offset) |
WTX_TCPIP_IPCSO(offset + offsetof(struct ip, ip_sum)) |
WTX_TCPIP_IPCSE(offset + iphl - 1));
}
offset += iphl;
if (m0->m_pkthdr.csum_flags & (M_CSUM_TCPv4|M_CSUM_UDPv4)) {
WM_EVCNT_INCR(&sc->sc_ev_txtusum);
fields |= htole32(WTX_TXSM);
tucs = htole32(WTX_TCPIP_TUCSS(offset) |
WTX_TCPIP_TUCSO(offset + m0->m_pkthdr.csum_data) |
WTX_TCPIP_TUCSE(0) /* rest of packet */);
} else if (__predict_true(sc->sc_txctx_tucs != 0xffffffff)) {
/* Use the cached value. */
tucs = sc->sc_txctx_tucs;
} else {
/* Just initialize it to a valid TCP context. */
tucs = htole32(WTX_TCPIP_TUCSS(offset) |
WTX_TCPIP_TUCSO(offset + offsetof(struct tcphdr, th_sum)) |
WTX_TCPIP_TUCSE(0) /* rest of packet */);
}
if (sc->sc_txctx_ipcs == ipcs &&
sc->sc_txctx_tucs == tucs) {
/* Cached context is fine. */
WM_EVCNT_INCR(&sc->sc_ev_txctx_hit);
} else {
/* Fill in the context descriptor. */
#ifdef WM_EVENT_COUNTERS
if (sc->sc_txctx_ipcs == 0xffffffff &&
sc->sc_txctx_tucs == 0xffffffff)
WM_EVCNT_INCR(&sc->sc_ev_txctx_init);
else
WM_EVCNT_INCR(&sc->sc_ev_txctx_miss);
#endif
t = (struct livengood_tcpip_ctxdesc *)
&sc->sc_txdescs[sc->sc_txnext];
t->tcpip_ipcs = ipcs;
t->tcpip_tucs = tucs;
t->tcpip_cmdlen =
htole32(WTX_CMD_DEXT | WTX_DTYP_C);
t->tcpip_seg = 0;
WM_CDTXSYNC(sc, sc->sc_txnext, 1, BUS_DMASYNC_PREWRITE);
sc->sc_txctx_ipcs = ipcs;
sc->sc_txctx_tucs = tucs;
sc->sc_txnext = WM_NEXTTX(sc->sc_txnext);
txs->txs_ndesc++;
}
*cmdp = WTX_CMD_DEXT | WTC_DTYP_D;
*fieldsp = fields;
return (0);
}
/*
* wm_start: [ifnet interface function]
*
* Start packet transmission on the interface.
*/
void
wm_start(struct ifnet *ifp)
{
struct wm_softc *sc = ifp->if_softc;
struct mbuf *m0/*, *m*/;
struct wm_txsoft *txs;
bus_dmamap_t dmamap;
int error, nexttx, lasttx, ofree, seg;
uint32_t cksumcmd, cksumfields;
if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING)
return;
/*
* Remember the previous number of free descriptors.
*/
ofree = sc->sc_txfree;
/*
* Loop through the send queue, setting up transmit descriptors
* until we drain the queue, or use up all available transmit
* descriptors.
*/
for (;;) {
/* Grab a packet off the queue. */
IFQ_POLL(&ifp->if_snd, m0);
if (m0 == NULL)
break;
DPRINTF(WM_DEBUG_TX,
("%s: TX: have packet to transmit: %p\n",
sc->sc_dev.dv_xname, m0));
/* Get a work queue entry. */
if (sc->sc_txsfree < WM_TXQUEUE_GC) {
wm_txintr(sc);
if (sc->sc_txsfree == 0) {
DPRINTF(WM_DEBUG_TX,
("%s: TX: no free job descriptors\n",
sc->sc_dev.dv_xname));
WM_EVCNT_INCR(&sc->sc_ev_txsstall);
break;
}
}
txs = &sc->sc_txsoft[sc->sc_txsnext];
dmamap = txs->txs_dmamap;
/*
* Load the DMA map. If this fails, the packet either
* didn't fit in the allotted number of segments, or we
* were short on resources. For the too-many-segments
* case, we simply report an error and drop the packet,
* since we can't sanely copy a jumbo packet to a single
* buffer.
*/
error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0,
BUS_DMA_WRITE|BUS_DMA_NOWAIT);
if (error) {
if (error == EFBIG) {
WM_EVCNT_INCR(&sc->sc_ev_txdrop);
printf("%s: Tx packet consumes too many "
"DMA segments, dropping...\n",
sc->sc_dev.dv_xname);
IFQ_DEQUEUE(&ifp->if_snd, m0);
m_freem(m0);
continue;
}
/*
* Short on resources, just stop for now.
*/
DPRINTF(WM_DEBUG_TX,
("%s: TX: dmamap load failed: %d\n",
sc->sc_dev.dv_xname, error));
break;
}
/*
* Ensure we have enough descriptors free to describe
* the packet. Note, we always reserve one descriptor
* at the end of the ring due to the semantics of the
* TDT register, plus one more in the event we need
* to re-load checksum offload context.
*/
if (dmamap->dm_nsegs > (sc->sc_txfree - 2)) {
/*
* Not enough free descriptors to transmit this
* packet. We haven't committed anything yet,
* so just unload the DMA map, put the packet
* pack on the queue, and punt. Notify the upper
* layer that there are no more slots left.
*/
DPRINTF(WM_DEBUG_TX,
("%s: TX: need %d descriptors, have %d\n",
sc->sc_dev.dv_xname, dmamap->dm_nsegs,
sc->sc_txfree - 1));
ifp->if_flags |= IFF_OACTIVE;
bus_dmamap_unload(sc->sc_dmat, dmamap);
WM_EVCNT_INCR(&sc->sc_ev_txdstall);
break;
}
IFQ_DEQUEUE(&ifp->if_snd, m0);
/*
* WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET.
*/
/* Sync the DMA map. */
bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize,
BUS_DMASYNC_PREWRITE);
DPRINTF(WM_DEBUG_TX,
("%s: TX: packet has %d DMA segments\n",
sc->sc_dev.dv_xname, dmamap->dm_nsegs));
WM_EVCNT_INCR(&sc->sc_ev_txseg[dmamap->dm_nsegs - 1]);
/*
* Store a pointer to the packet so that we can free it
* later.
*
* Initially, we consider the number of descriptors the
* packet uses the number of DMA segments. This may be
* incremented by 1 if we do checksum offload (a descriptor
* is used to set the checksum context).
*/
txs->txs_mbuf = m0;
txs->txs_firstdesc = sc->sc_txnext;
txs->txs_ndesc = dmamap->dm_nsegs;
/*
* Set up checksum offload parameters for
* this packet.
*/
if (m0->m_pkthdr.csum_flags &
(M_CSUM_IPv4|M_CSUM_TCPv4|M_CSUM_UDPv4)) {
if (wm_tx_cksum(sc, txs, &cksumcmd,
&cksumfields) != 0) {
/* Error message already displayed. */
m_freem(m0);
bus_dmamap_unload(sc->sc_dmat, dmamap);
txs->txs_mbuf = NULL;
continue;
}
} else {
cksumcmd = 0;
cksumfields = 0;
}
cksumcmd |= htole32(WTX_CMD_IDE);
/*
* Initialize the transmit descriptor.
*/
for (nexttx = sc->sc_txnext, seg = 0;
seg < dmamap->dm_nsegs;
seg++, nexttx = WM_NEXTTX(nexttx)) {
/*
* Note: we currently only use 32-bit DMA
* addresses.
*/
sc->sc_txdescs[nexttx].wtx_addr.wa_high = 0;
sc->sc_txdescs[nexttx].wtx_addr.wa_low =
htole32(dmamap->dm_segs[seg].ds_addr);
sc->sc_txdescs[nexttx].wtx_cmdlen = cksumcmd |
htole32(dmamap->dm_segs[seg].ds_len);
sc->sc_txdescs[nexttx].wtx_fields.wtxu_bits =
cksumfields;
lasttx = nexttx;
DPRINTF(WM_DEBUG_TX,
("%s: TX: desc %d: low 0x%08x, len 0x%04x\n",
sc->sc_dev.dv_xname, nexttx,
(uint32_t) dmamap->dm_segs[seg].ds_addr,
(uint32_t) dmamap->dm_segs[seg].ds_len));
}
/*
* Set up the command byte on the last descriptor of
* the packet. If we're in the interrupt delay window,
* delay the interrupt.
*/
sc->sc_txdescs[lasttx].wtx_cmdlen |=
htole32(WTX_CMD_EOP | WTX_CMD_IFCS | WTX_CMD_RS);
#if 0 /* XXXJRT */
/*
* If VLANs are enabled and the packet has a VLAN tag, set
* up the descriptor to encapsulate the packet for us.
*
* This is only valid on the last descriptor of the packet.
*/
if (sc->sc_ethercom.ec_nvlans != 0 &&
(m = m_aux_find(m0, AF_LINK, ETHERTYPE_VLAN)) != NULL) {
sc->sc_txdescs[lasttx].wtx_cmdlen |=
htole32(WTX_CMD_VLE);
sc->sc_txdescs[lasttx].wtx_fields.wtxu_fields.wtxu_vlan
= htole16(*mtod(m, int *) & 0xffff);
}
#endif /* XXXJRT */
txs->txs_lastdesc = lasttx;
DPRINTF(WM_DEBUG_TX,
("%s: TX: desc %d: cmdlen 0x%08x\n", sc->sc_dev.dv_xname,
lasttx, sc->sc_txdescs[lasttx].wtx_cmdlen));
/* Sync the descriptors we're using. */
WM_CDTXSYNC(sc, sc->sc_txnext, dmamap->dm_nsegs,
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
/* Give the packet to the chip. */
CSR_WRITE(sc, sc->sc_tdt_reg, nexttx);
DPRINTF(WM_DEBUG_TX,
("%s: TX: TDT -> %d\n", sc->sc_dev.dv_xname, nexttx));
DPRINTF(WM_DEBUG_TX,
("%s: TX: finished transmitting packet, job %d\n",
sc->sc_dev.dv_xname, sc->sc_txsnext));
/* Advance the tx pointer. */
sc->sc_txfree -= txs->txs_ndesc;
sc->sc_txnext = nexttx;
sc->sc_txsfree--;
sc->sc_txsnext = WM_NEXTTXS(sc->sc_txsnext);
#if NBPFILTER > 0
/* Pass the packet to any BPF listeners. */
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m0);
#endif /* NBPFILTER > 0 */
}
if (sc->sc_txsfree == 0 || sc->sc_txfree <= 2) {
/* No more slots; notify upper layer. */
ifp->if_flags |= IFF_OACTIVE;
}
if (sc->sc_txfree != ofree) {
/* Set a watchdog timer in case the chip flakes out. */
ifp->if_timer = 5;
}
}
/*
* wm_watchdog: [ifnet interface function]
*
* Watchdog timer handler.
*/
void
wm_watchdog(struct ifnet *ifp)
{
struct wm_softc *sc = ifp->if_softc;
/*
* Since we're using delayed interrupts, sweep up
* before we report an error.
*/
wm_txintr(sc);
if (sc->sc_txfree != WM_NTXDESC) {
printf("%s: device timeout (txfree %d txsfree %d txnext %d)\n",
sc->sc_dev.dv_xname, sc->sc_txfree, sc->sc_txsfree,
sc->sc_txnext);
ifp->if_oerrors++;
/* Reset the interface. */
(void) wm_init(ifp);
}
/* Try to get more packets going. */
wm_start(ifp);
}
/*
* wm_ioctl: [ifnet interface function]
*
* Handle control requests from the operator.
*/
int
wm_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct wm_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *) data;
int s, error;
s = splnet();
switch (cmd) {
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd);
break;
default:
error = ether_ioctl(ifp, cmd, data);
if (error == ENETRESET) {
/*
* Multicast list has changed; set the hardware filter
* accordingly.
*/
wm_set_filter(sc);
error = 0;
}
break;
}
/* Try to get more packets going. */
wm_start(ifp);
splx(s);
return (error);
}
/*
* wm_intr:
*
* Interrupt service routine.
*/
int
wm_intr(void *arg)
{
struct wm_softc *sc = arg;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
uint32_t icr;
int wantinit, handled = 0;
for (wantinit = 0; wantinit == 0;) {
icr = CSR_READ(sc, WMREG_ICR);
if ((icr & sc->sc_icr) == 0)
break;
#if 0 /*NRND > 0*/
if (RND_ENABLED(&sc->rnd_source))
rnd_add_uint32(&sc->rnd_source, icr);
#endif
handled = 1;
#if defined(WM_DEBUG) || defined(WM_EVENT_COUNTERS)
if (icr & (ICR_RXDMT0|ICR_RXT0)) {
DPRINTF(WM_DEBUG_RX,
("%s: RX: got Rx intr 0x%08x\n",
sc->sc_dev.dv_xname,
icr & (ICR_RXDMT0|ICR_RXT0)));
WM_EVCNT_INCR(&sc->sc_ev_rxintr);
}
#endif
wm_rxintr(sc);
#if defined(WM_DEBUG) || defined(WM_EVENT_COUNTERS)
if (icr & ICR_TXDW) {
DPRINTF(WM_DEBUG_TX,
("%s: TX: got TDXW interrupt\n",
sc->sc_dev.dv_xname));
WM_EVCNT_INCR(&sc->sc_ev_txdw);
}
#endif
wm_txintr(sc);
if (icr & (ICR_LSC|ICR_RXSEQ|ICR_RXCFG)) {
WM_EVCNT_INCR(&sc->sc_ev_linkintr);
wm_linkintr(sc, icr);
}
if (icr & ICR_RXO) {
printf("%s: Receive overrun\n", sc->sc_dev.dv_xname);
wantinit = 1;
}
}
if (handled) {
if (wantinit)
wm_init(ifp);
/* Try to get more packets going. */
wm_start(ifp);
}
return (handled);
}
/*
* wm_txintr:
*
* Helper; handle transmit interrupts.
*/
void
wm_txintr(struct wm_softc *sc)
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct wm_txsoft *txs;
uint8_t status;
int i;
ifp->if_flags &= ~IFF_OACTIVE;
/*
* Go through the Tx list and free mbufs for those
* frames which have been transmitted.
*/
for (i = sc->sc_txsdirty; sc->sc_txsfree != WM_TXQUEUELEN;
i = WM_NEXTTXS(i), sc->sc_txsfree++) {
txs = &sc->sc_txsoft[i];
DPRINTF(WM_DEBUG_TX,
("%s: TX: checking job %d\n", sc->sc_dev.dv_xname, i));
WM_CDTXSYNC(sc, txs->txs_firstdesc, txs->txs_dmamap->dm_nsegs,
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
status = le32toh(sc->sc_txdescs[
txs->txs_lastdesc].wtx_fields.wtxu_bits);
if ((status & WTX_ST_DD) == 0) {
WM_CDTXSYNC(sc, txs->txs_lastdesc, 1,
BUS_DMASYNC_PREREAD);
break;
}
DPRINTF(WM_DEBUG_TX,
("%s: TX: job %d done: descs %d..%d\n",
sc->sc_dev.dv_xname, i, txs->txs_firstdesc,
txs->txs_lastdesc));
/*
* XXX We should probably be using the statistics
* XXX registers, but I don't know if they exist
* XXX on chips before the i82544.
*/
#ifdef WM_EVENT_COUNTERS
if (status & WTX_ST_TU)
WM_EVCNT_INCR(&sc->sc_ev_tu);
#endif /* WM_EVENT_COUNTERS */
if (status & (WTX_ST_EC|WTX_ST_LC)) {
ifp->if_oerrors++;
if (status & WTX_ST_LC)
printf("%s: late collision\n",
sc->sc_dev.dv_xname);
else if (status & WTX_ST_EC) {
ifp->if_collisions += 16;
printf("%s: excessive collisions\n",
sc->sc_dev.dv_xname);
}
} else
ifp->if_opackets++;
sc->sc_txfree += txs->txs_ndesc;
bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap,
0, txs->txs_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap);
m_freem(txs->txs_mbuf);
txs->txs_mbuf = NULL;
}
/* Update the dirty transmit buffer pointer. */
sc->sc_txsdirty = i;
DPRINTF(WM_DEBUG_TX,
("%s: TX: txsdirty -> %d\n", sc->sc_dev.dv_xname, i));
/*
* If there are no more pending transmissions, cancel the watchdog
* timer.
*/
if (sc->sc_txsfree == WM_TXQUEUELEN)
ifp->if_timer = 0;
}
/*
* wm_rxintr:
*
* Helper; handle receive interrupts.
*/
void
wm_rxintr(struct wm_softc *sc)
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct wm_rxsoft *rxs;
struct mbuf *m;
int i, len;
uint8_t status, errors;
for (i = sc->sc_rxptr;; i = WM_NEXTRX(i)) {
rxs = &sc->sc_rxsoft[i];
DPRINTF(WM_DEBUG_RX,
("%s: RX: checking descriptor %d\n",
sc->sc_dev.dv_xname, i));
WM_CDRXSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
status = sc->sc_rxdescs[i].wrx_status;
errors = sc->sc_rxdescs[i].wrx_errors;
len = le16toh(sc->sc_rxdescs[i].wrx_len);
if ((status & WRX_ST_DD) == 0) {
/*
* We have processed all of the receive descriptors.
*/
WM_CDRXSYNC(sc, i, BUS_DMASYNC_PREREAD);
break;
}
if (__predict_false(sc->sc_rxdiscard)) {
DPRINTF(WM_DEBUG_RX,
("%s: RX: discarding contents of descriptor %d\n",
sc->sc_dev.dv_xname, i));
WM_INIT_RXDESC(sc, i);
if (status & WRX_ST_EOP) {
/* Reset our state. */
DPRINTF(WM_DEBUG_RX,
("%s: RX: resetting rxdiscard -> 0\n",
sc->sc_dev.dv_xname));
sc->sc_rxdiscard = 0;
}
continue;
}
bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
m = rxs->rxs_mbuf;
/*
* Add a new receive buffer to the ring.
*/
if (wm_add_rxbuf(sc, i) != 0) {
/*
* Failed, throw away what we've done so
* far, and discard the rest of the packet.
*/
ifp->if_ierrors++;
bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
WM_INIT_RXDESC(sc, i);
if ((status & WRX_ST_EOP) == 0)
sc->sc_rxdiscard = 1;
if (sc->sc_rxhead != NULL)
m_freem(sc->sc_rxhead);
WM_RXCHAIN_RESET(sc);
DPRINTF(WM_DEBUG_RX,
("%s: RX: Rx buffer allocation failed, "
"dropping packet%s\n", sc->sc_dev.dv_xname,
sc->sc_rxdiscard ? " (discard)" : ""));
continue;
}
WM_RXCHAIN_LINK(sc, m);
m->m_len = len;
DPRINTF(WM_DEBUG_RX,
("%s: RX: buffer at %p len %d\n",
sc->sc_dev.dv_xname, m->m_data, len));
/*
* If this is not the end of the packet, keep
* looking.
*/
if ((status & WRX_ST_EOP) == 0) {
sc->sc_rxlen += len;
DPRINTF(WM_DEBUG_RX,
("%s: RX: not yet EOP, rxlen -> %d\n",
sc->sc_dev.dv_xname, sc->sc_rxlen));
continue;
}
/*
* Okay, we have the entire packet now...
*/
*sc->sc_rxtailp = NULL;
m = sc->sc_rxhead;
len += sc->sc_rxlen;
WM_RXCHAIN_RESET(sc);
DPRINTF(WM_DEBUG_RX,
("%s: RX: have entire packet, len -> %d\n",
sc->sc_dev.dv_xname, len));
/*
* If an error occurred, update stats and drop the packet.
*/
if (errors &
(WRX_ER_CE|WRX_ER_SE|WRX_ER_SEQ|WRX_ER_CXE|WRX_ER_RXE)) {
ifp->if_ierrors++;
if (errors & WRX_ER_SE)
printf("%s: symbol error\n",
sc->sc_dev.dv_xname);
else if (errors & WRX_ER_SEQ)
printf("%s: receive sequence error\n",
sc->sc_dev.dv_xname);
else if (errors & WRX_ER_CE)
printf("%s: CRC error\n",
sc->sc_dev.dv_xname);
m_freem(m);
continue;
}
/*
* No errors. Receive the packet.
*
* Note, we have configured the chip to include the
* CRC with every packet.
*/
m->m_flags |= M_HASFCS;
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = len;
#if 0 /* XXXJRT */
/*
* If VLANs are enabled, VLAN packets have been unwrapped
* for us. Associate the tag with the packet.
*/
if (sc->sc_ethercom.ec_nvlans != 0 &&
(status & WRX_ST_VP) != 0) {
struct mbuf *vtag;
vtag = m_aux_add(m, AF_LINK, ETHERTYPE_VLAN);
if (vtag == NULL) {
ifp->if_ierrors++;
printf("%s: unable to allocate VLAN tag\n",
sc->sc_dev.dv_xname);
m_freem(m);
continue;
}
*mtod(m, int *) =
le16toh(sc->sc_rxdescs[i].wrx_special);
vtag->m_len = sizeof(int);
}
#endif /* XXXJRT */
/*
* Set up checksum info for this packet.
*/
if (status & WRX_ST_IPCS) {
WM_EVCNT_INCR(&sc->sc_ev_rxipsum);
m->m_pkthdr.csum_flags |= M_CSUM_IPv4;
if (errors & WRX_ER_IPE)
m->m_pkthdr.csum_flags |= M_CSUM_IPv4_BAD;
}
if (status & WRX_ST_TCPCS) {
/*
* Note: we don't know if this was TCP or UDP,
* so we just set both bits, and expect the
* upper layers to deal.
*/
WM_EVCNT_INCR(&sc->sc_ev_rxtusum);
m->m_pkthdr.csum_flags |= M_CSUM_TCPv4|M_CSUM_UDPv4;
if (errors & WRX_ER_TCPE)
m->m_pkthdr.csum_flags |= M_CSUM_TCP_UDP_BAD;
}
ifp->if_ipackets++;
#if NBPFILTER > 0
/* Pass this up to any BPF listeners. */
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m);
#endif /* NBPFILTER > 0 */
/* Pass it on. */
(*ifp->if_input)(ifp, m);
}
/* Update the receive pointer. */
sc->sc_rxptr = i;
DPRINTF(WM_DEBUG_RX,
("%s: RX: rxptr -> %d\n", sc->sc_dev.dv_xname, i));
}
/*
* wm_linkintr:
*
* Helper; handle link interrupts.
*/
void
wm_linkintr(struct wm_softc *sc, uint32_t icr)
{
uint32_t status;
/*
* If we get a link status interrupt on a 1000BASE-T
* device, just fall into the normal MII tick path.
*/
if (sc->sc_flags & WM_F_HAS_MII) {
if (icr & ICR_LSC) {
DPRINTF(WM_DEBUG_LINK,
("%s: LINK: LSC -> mii_tick\n",
sc->sc_dev.dv_xname));
mii_tick(&sc->sc_mii);
} else if (icr & ICR_RXSEQ) {
DPRINTF(WM_DEBUG_LINK,
("%s: LINK Receive sequence error\n",
sc->sc_dev.dv_xname));
}
return;
}
/*
* If we are now receiving /C/, check for link again in
* a couple of link clock ticks.
*/
if (icr & ICR_RXCFG) {
DPRINTF(WM_DEBUG_LINK, ("%s: LINK: receiving /C/\n",
sc->sc_dev.dv_xname));
sc->sc_tbi_anstate = 2;
}
if (icr & ICR_LSC) {
status = CSR_READ(sc, WMREG_STATUS);
if (status & STATUS_LU) {
DPRINTF(WM_DEBUG_LINK, ("%s: LINK: LSC -> up %s\n",
sc->sc_dev.dv_xname,
(status & STATUS_FD) ? "FDX" : "HDX"));
sc->sc_tctl &= ~TCTL_COLD(0x3ff);
if (status & STATUS_FD)
sc->sc_tctl |=
TCTL_COLD(TX_COLLISION_DISTANCE_FDX);
else
sc->sc_tctl |=
TCTL_COLD(TX_COLLISION_DISTANCE_HDX);
CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl);
sc->sc_tbi_linkup = 1;
} else {
DPRINTF(WM_DEBUG_LINK, ("%s: LINK: LSC -> down\n",
sc->sc_dev.dv_xname));
sc->sc_tbi_linkup = 0;
}
sc->sc_tbi_anstate = 2;
wm_tbi_set_linkled(sc);
} else if (icr & ICR_RXSEQ) {
DPRINTF(WM_DEBUG_LINK,
("%s: LINK: Receive sequence error\n",
sc->sc_dev.dv_xname));
}
}
/*
* wm_tick:
*
* One second timer, used to check link status, sweep up
* completed transmit jobs, etc.
*/
void
wm_tick(void *arg)
{
struct wm_softc *sc = arg;
int s;
s = splnet();
if (sc->sc_flags & WM_F_HAS_MII)
mii_tick(&sc->sc_mii);
else
wm_tbi_check_link(sc);
splx(s);
callout_reset(&sc->sc_tick_ch, hz, wm_tick, sc);
}
/*
* wm_reset:
*
* Reset the i82542 chip.
*/
void
wm_reset(struct wm_softc *sc)
{
int i;
CSR_WRITE(sc, WMREG_CTRL, CTRL_RST);
delay(10000);
for (i = 0; i < 1000; i++) {
if ((CSR_READ(sc, WMREG_CTRL) & CTRL_RST) == 0)
return;
delay(20);
}
if (CSR_READ(sc, WMREG_CTRL) & CTRL_RST)
printf("%s: WARNING: reset failed to complete\n",
sc->sc_dev.dv_xname);
}
/*
* wm_init: [ifnet interface function]
*
* Initialize the interface. Must be called at splnet().
*/
int
wm_init(struct ifnet *ifp)
{
struct wm_softc *sc = ifp->if_softc;
struct wm_rxsoft *rxs;
int i, error = 0;
uint32_t reg;
/* Cancel any pending I/O. */
wm_stop(ifp, 0);
/* Reset the chip to a known state. */
wm_reset(sc);
/* Initialize the transmit descriptor ring. */
memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs));
WM_CDTXSYNC(sc, 0, WM_NTXDESC,
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
sc->sc_txfree = WM_NTXDESC;
sc->sc_txnext = 0;
sc->sc_txctx_ipcs = 0xffffffff;
sc->sc_txctx_tucs = 0xffffffff;
if (sc->sc_type < WM_T_82543) {
CSR_WRITE(sc, WMREG_OLD_TBDAH, 0);
CSR_WRITE(sc, WMREG_OLD_TBDAL, WM_CDTXADDR(sc, 0));
CSR_WRITE(sc, WMREG_OLD_TDLEN, sizeof(sc->sc_txdescs));
CSR_WRITE(sc, WMREG_OLD_TDH, 0);
CSR_WRITE(sc, WMREG_OLD_TDT, 0);
CSR_WRITE(sc, WMREG_OLD_TIDV, 128);
} else {
CSR_WRITE(sc, WMREG_TBDAH, 0);
CSR_WRITE(sc, WMREG_TBDAL, WM_CDTXADDR(sc, 0));
CSR_WRITE(sc, WMREG_TDLEN, sizeof(sc->sc_txdescs));
CSR_WRITE(sc, WMREG_TDH, 0);
CSR_WRITE(sc, WMREG_TDT, 0);
CSR_WRITE(sc, WMREG_TIDV, 128);
CSR_WRITE(sc, WMREG_TXDCTL, TXDCTL_PTHRESH(0) |
TXDCTL_HTHRESH(0) | TXDCTL_WTHRESH(0));
CSR_WRITE(sc, WMREG_RXDCTL, RXDCTL_PTHRESH(0) |
RXDCTL_HTHRESH(0) | RXDCTL_WTHRESH(1));
}
CSR_WRITE(sc, WMREG_TQSA_LO, 0);
CSR_WRITE(sc, WMREG_TQSA_HI, 0);
/* Initialize the transmit job descriptors. */
for (i = 0; i < WM_TXQUEUELEN; i++)
sc->sc_txsoft[i].txs_mbuf = NULL;
sc->sc_txsfree = WM_TXQUEUELEN;
sc->sc_txsnext = 0;
sc->sc_txsdirty = 0;
/*
* Initialize the receive descriptor and receive job
* descriptor rings.
*/
if (sc->sc_type < WM_T_82543) {
CSR_WRITE(sc, WMREG_OLD_RDBAH0, 0);
CSR_WRITE(sc, WMREG_OLD_RDBAL0, WM_CDRXADDR(sc, 0));
CSR_WRITE(sc, WMREG_OLD_RDLEN0, sizeof(sc->sc_rxdescs));
CSR_WRITE(sc, WMREG_OLD_RDH0, 0);
CSR_WRITE(sc, WMREG_OLD_RDT0, 0);
CSR_WRITE(sc, WMREG_OLD_RDTR0, 28 | RDTR_FPD);
CSR_WRITE(sc, WMREG_OLD_RDBA1_HI, 0);
CSR_WRITE(sc, WMREG_OLD_RDBA1_LO, 0);
CSR_WRITE(sc, WMREG_OLD_RDLEN1, 0);
CSR_WRITE(sc, WMREG_OLD_RDH1, 0);
CSR_WRITE(sc, WMREG_OLD_RDT1, 0);
CSR_WRITE(sc, WMREG_OLD_RDTR1, 0);
} else {
CSR_WRITE(sc, WMREG_RDBAH, 0);
CSR_WRITE(sc, WMREG_RDBAL, WM_CDRXADDR(sc, 0));
CSR_WRITE(sc, WMREG_RDLEN, sizeof(sc->sc_rxdescs));
CSR_WRITE(sc, WMREG_RDH, 0);
CSR_WRITE(sc, WMREG_RDT, 0);
CSR_WRITE(sc, WMREG_RDTR, 28 | RDTR_FPD);
}
for (i = 0; i < WM_NRXDESC; i++) {
rxs = &sc->sc_rxsoft[i];
if (rxs->rxs_mbuf == NULL) {
if ((error = wm_add_rxbuf(sc, i)) != 0) {
printf("%s: unable to allocate or map rx "
"buffer %d, error = %d\n",
sc->sc_dev.dv_xname, i, error);
/*
* XXX Should attempt to run with fewer receive
* XXX buffers instead of just failing.
*/
wm_rxdrain(sc);
goto out;
}
} else
WM_INIT_RXDESC(sc, i);
}
sc->sc_rxptr = 0;
sc->sc_rxdiscard = 0;
WM_RXCHAIN_RESET(sc);
/*
* Clear out the VLAN table -- we don't use it (yet).
*/
CSR_WRITE(sc, WMREG_VET, 0);
for (i = 0; i < WM_VLAN_TABSIZE; i++)
CSR_WRITE(sc, WMREG_VFTA + (i << 2), 0);
/*
* Set up flow-control parameters.
*
* XXX Values could probably stand some tuning.
*/
if (sc->sc_ctrl & (CTRL_RFCE|CTRL_TFCE)) {
CSR_WRITE(sc, WMREG_FCAL, FCAL_CONST);
CSR_WRITE(sc, WMREG_FCAH, FCAH_CONST);
CSR_WRITE(sc, WMREG_FCT, ETHERTYPE_FLOWCONTROL);
if (sc->sc_type < WM_T_82543) {
CSR_WRITE(sc, WMREG_OLD_FCRTH, FCRTH_DFLT);
CSR_WRITE(sc, WMREG_OLD_FCRTL, FCRTL_DFLT);
} else {
CSR_WRITE(sc, WMREG_FCRTH, FCRTH_DFLT);
CSR_WRITE(sc, WMREG_FCRTL, FCRTL_DFLT);
}
CSR_WRITE(sc, WMREG_FCTTV, FCTTV_DFLT);
}
#if 0 /* XXXJRT */
/* Deal with VLAN enables. */
if (sc->sc_ethercom.ec_nvlans != 0)
sc->sc_ctrl |= CTRL_VME;
else
#endif /* XXXJRT */
sc->sc_ctrl &= ~CTRL_VME;
/* Write the control registers. */
CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl);
#if 0
CSR_WRITE(sc, WMREG_CTRL_EXT, sc->sc_ctrl_ext);
#endif
/*
* Set up checksum offload parameters.
*/
reg = CSR_READ(sc, WMREG_RXCSUM);
if (ifp->if_capenable & IFCAP_CSUM_IPv4)
reg |= RXCSUM_IPOFL;
else
reg &= ~RXCSUM_IPOFL;
if (ifp->if_capenable & (IFCAP_CSUM_TCPv4 | IFCAP_CSUM_UDPv4))
reg |= RXCSUM_IPOFL | RXCSUM_TUOFL;
else {
reg &= ~RXCSUM_TUOFL;
if ((ifp->if_capenable & IFCAP_CSUM_IPv4) == 0)
reg &= ~RXCSUM_IPOFL;
}
CSR_WRITE(sc, WMREG_RXCSUM, reg);
/*
* Set up the interrupt registers.
*/
CSR_WRITE(sc, WMREG_IMC, 0xffffffffU);
sc->sc_icr = ICR_TXDW | ICR_LSC | ICR_RXSEQ | ICR_RXDMT0 |
ICR_RXO | ICR_RXT0;
if ((sc->sc_flags & WM_F_HAS_MII) == 0)
sc->sc_icr |= ICR_RXCFG;
CSR_WRITE(sc, WMREG_IMS, sc->sc_icr);
/* Set up the inter-packet gap. */
CSR_WRITE(sc, WMREG_TIPG, sc->sc_tipg);
#if 0 /* XXXJRT */
/* Set the VLAN ethernetype. */
CSR_WRITE(sc, WMREG_VET, ETHERTYPE_VLAN);
#endif
/*
* Set up the transmit control register; we start out with
* a collision distance suitable for FDX, but update it whe
* we resolve the media type.
*/
sc->sc_tctl = TCTL_EN | TCTL_PSP | TCTL_CT(TX_COLLISION_THRESHOLD) |
TCTL_COLD(TX_COLLISION_DISTANCE_FDX);
CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl);
/* Set the media. */
(void) (*sc->sc_mii.mii_media.ifm_change)(ifp);
/*
* Set up the receive control register; we actually program
* the register when we set the receive filter. Use multicast
* address offset type 0.
*
* Only the i82544 has the ability to strip the incoming
* CRC, so we don't enable that feature.
*/
sc->sc_mchash_type = 0;
sc->sc_rctl = RCTL_EN | RCTL_LBM_NONE | RCTL_RDMTS_1_2 | RCTL_2k |
RCTL_DPF | RCTL_MO(sc->sc_mchash_type);
/* Set the receive filter. */
wm_set_filter(sc);
/* Start the one second link check clock. */
callout_reset(&sc->sc_tick_ch, hz, wm_tick, sc);
/* ...all done! */
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
out:
if (error)
printf("%s: interface not running\n", sc->sc_dev.dv_xname);
return (error);
}
/*
* wm_rxdrain:
*
* Drain the receive queue.
*/
void
wm_rxdrain(struct wm_softc *sc)
{
struct wm_rxsoft *rxs;
int i;
for (i = 0; i < WM_NRXDESC; i++) {
rxs = &sc->sc_rxsoft[i];
if (rxs->rxs_mbuf != NULL) {
bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap);
m_freem(rxs->rxs_mbuf);
rxs->rxs_mbuf = NULL;
}
}
}
/*
* wm_stop: [ifnet interface function]
*
* Stop transmission on the interface.
*/
void
wm_stop(struct ifnet *ifp, int disable)
{
struct wm_softc *sc = ifp->if_softc;
struct wm_txsoft *txs;
int i;
/* Stop the one second clock. */
callout_stop(&sc->sc_tick_ch);
if (sc->sc_flags & WM_F_HAS_MII) {
/* Down the MII. */
mii_down(&sc->sc_mii);
}
/* Stop the transmit and receive processes. */
CSR_WRITE(sc, WMREG_TCTL, 0);
CSR_WRITE(sc, WMREG_RCTL, 0);
/* Release any queued transmit buffers. */
for (i = 0; i < WM_TXQUEUELEN; i++) {
txs = &sc->sc_txsoft[i];
if (txs->txs_mbuf != NULL) {
bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap);
m_freem(txs->txs_mbuf);
txs->txs_mbuf = NULL;
}
}
if (disable)
wm_rxdrain(sc);
/* Mark the interface as down and cancel the watchdog timer. */
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
ifp->if_timer = 0;
}
/*
* wm_read_eeprom:
*
* Read data from the serial EEPROM.
*/
void
wm_read_eeprom(struct wm_softc *sc, int word, int wordcnt, uint16_t *data)
{
uint32_t reg;
int i, x, addrbits = 6;
for (i = 0; i < wordcnt; i++) {
if (sc->sc_flags & WM_F_EEPROM_HANDSHAKE) {
reg = CSR_READ(sc, WMREG_EECD);
/* Get number of address bits. */
if (reg & EECD_EE_SIZE)
addrbits = 8;
/* Request EEPROM access. */
reg |= EECD_EE_REQ;
CSR_WRITE(sc, WMREG_EECD, reg);
/* ..and wait for it to be granted. */
for (x = 0; x < 100; x++) {
reg = CSR_READ(sc, WMREG_EECD);
if (reg & EECD_EE_GNT)
break;
delay(5);
}
if ((reg & EECD_EE_GNT) == 0) {
printf("%s: could not acquire EEPROM GNT\n",
sc->sc_dev.dv_xname);
*data = 0xffff;
reg &= ~EECD_EE_REQ;
CSR_WRITE(sc, WMREG_EECD, reg);
continue;
}
} else
reg = 0;
/* Clear SK and DI. */
reg &= ~(EECD_SK | EECD_DI);
CSR_WRITE(sc, WMREG_EECD, reg);
/* Set CHIP SELECT. */
reg |= EECD_CS;
CSR_WRITE(sc, WMREG_EECD, reg);
delay(2);
/* Shift in the READ command. */
for (x = 3; x > 0; x--) {
if (UWIRE_OPC_READ & (1 << (x - 1)))
reg |= EECD_DI;
else
reg &= ~EECD_DI;
CSR_WRITE(sc, WMREG_EECD, reg);
delay(2);
CSR_WRITE(sc, WMREG_EECD, reg | EECD_SK);
delay(2);
CSR_WRITE(sc, WMREG_EECD, reg);
delay(2);
}
/* Shift in address. */
for (x = addrbits; x > 0; x--) {
if ((word + i) & (1 << (x - 1)))
reg |= EECD_DI;
else
reg &= ~EECD_DI;
CSR_WRITE(sc, WMREG_EECD, reg);
delay(2);
CSR_WRITE(sc, WMREG_EECD, reg | EECD_SK);
delay(2);
CSR_WRITE(sc, WMREG_EECD, reg);
delay(2);
}
/* Shift out the data. */
reg &= ~EECD_DI;
data[i] = 0;
for (x = 16; x > 0; x--) {
CSR_WRITE(sc, WMREG_EECD, reg | EECD_SK);
delay(2);
if (CSR_READ(sc, WMREG_EECD) & EECD_DO)
data[i] |= (1 << (x - 1));
CSR_WRITE(sc, WMREG_EECD, reg);
delay(2);
}
/* Clear CHIP SELECT. */
reg &= ~EECD_CS;
CSR_WRITE(sc, WMREG_EECD, reg);
delay(2);
if (sc->sc_flags & WM_F_EEPROM_HANDSHAKE) {
/* Release the EEPROM. */
reg &= ~EECD_EE_REQ;
CSR_WRITE(sc, WMREG_EECD, reg);
}
}
}
/*
* wm_add_rxbuf:
*
* Add a receive buffer to the indiciated descriptor.
*/
int
wm_add_rxbuf(struct wm_softc *sc, int idx)
{
struct wm_rxsoft *rxs = &sc->sc_rxsoft[idx];
struct mbuf *m;
int error;
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL)
return (ENOBUFS);
MCLGET(m, M_DONTWAIT);
if ((m->m_flags & M_EXT) == 0) {
m_freem(m);
return (ENOBUFS);
}
if (rxs->rxs_mbuf != NULL)
bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap);
rxs->rxs_mbuf = m;
error = bus_dmamap_load(sc->sc_dmat, rxs->rxs_dmamap,
m->m_ext.ext_buf, m->m_ext.ext_size, NULL,
BUS_DMA_READ|BUS_DMA_NOWAIT);
if (error) {
printf("%s: unable to load rx DMA map %d, error = %d\n",
sc->sc_dev.dv_xname, idx, error);
panic("wm_add_rxbuf"); /* XXX XXX XXX */
}
bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
WM_INIT_RXDESC(sc, idx);
return (0);
}
/*
* wm_set_ral:
*
* Set an entery in the receive address list.
*/
static void
wm_set_ral(struct wm_softc *sc, const uint8_t *enaddr, int idx)
{
uint32_t ral_lo, ral_hi;
if (enaddr != NULL) {
ral_lo = enaddr[0] | (enaddr[1] << 8) | (enaddr[2] << 16) |
(enaddr[3] << 24);
ral_hi = enaddr[4] | (enaddr[5] << 8);
ral_hi |= RAL_AV;
} else {
ral_lo = 0;
ral_hi = 0;
}
if (sc->sc_type >= WM_T_82544) {
CSR_WRITE(sc, WMREG_RAL_LO(WMREG_CORDOVA_RAL_BASE, idx),
ral_lo);
CSR_WRITE(sc, WMREG_RAL_HI(WMREG_CORDOVA_RAL_BASE, idx),
ral_hi);
} else {
CSR_WRITE(sc, WMREG_RAL_LO(WMREG_RAL_BASE, idx), ral_lo);
CSR_WRITE(sc, WMREG_RAL_HI(WMREG_RAL_BASE, idx), ral_hi);
}
}
/*
* wm_mchash:
*
* Compute the hash of the multicast address for the 4096-bit
* multicast filter.
*/
static uint32_t
wm_mchash(struct wm_softc *sc, const uint8_t *enaddr)
{
static const int lo_shift[4] = { 4, 3, 2, 0 };
static const int hi_shift[4] = { 4, 5, 6, 8 };
uint32_t hash;
hash = (enaddr[4] >> lo_shift[sc->sc_mchash_type]) |
(((uint16_t) enaddr[5]) << hi_shift[sc->sc_mchash_type]);
return (hash & 0xfff);
}
/*
* wm_set_filter:
*
* Set up the receive filter.
*/
void
wm_set_filter(struct wm_softc *sc)
{
struct ethercom *ec = &sc->sc_ethercom;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct ether_multi *enm;
struct ether_multistep step;
bus_addr_t mta_reg;
uint32_t hash, reg, bit;
int i;
if (sc->sc_type >= WM_T_82544)
mta_reg = WMREG_CORDOVA_MTA;
else
mta_reg = WMREG_MTA;
sc->sc_rctl &= ~(RCTL_BAM | RCTL_UPE | RCTL_MPE);
if (ifp->if_flags & IFF_BROADCAST)
sc->sc_rctl |= RCTL_BAM;
if (ifp->if_flags & IFF_PROMISC) {
sc->sc_rctl |= RCTL_UPE;
goto allmulti;
}
/*
* Set the station address in the first RAL slot, and
* clear the remaining slots.
*/
wm_set_ral(sc, LLADDR(ifp->if_sadl), 0);
for (i = 1; i < WM_RAL_TABSIZE; i++)
wm_set_ral(sc, NULL, i);
/* Clear out the multicast table. */
for (i = 0; i < WM_MC_TABSIZE; i++)
CSR_WRITE(sc, mta_reg + (i << 2), 0);
ETHER_FIRST_MULTI(step, ec, enm);
while (enm != NULL) {
if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
/*
* We must listen to a range of multicast addresses.
* For now, just accept all multicasts, rather than
* trying to set only those filter bits needed to match
* the range. (At this time, the only use of address
* ranges is for IP multicast routing, for which the
* range is big enough to require all bits set.)
*/
goto allmulti;
}
hash = wm_mchash(sc, enm->enm_addrlo);
reg = (hash >> 5) & 0x7f;
bit = hash & 0x1f;
hash = CSR_READ(sc, mta_reg + (reg << 2));
hash |= 1U << bit;
/* XXX Hardware bug?? */
if (sc->sc_type == WM_T_82544 && (reg & 0xe) == 1) {
bit = CSR_READ(sc, mta_reg + ((reg - 1) << 2));
CSR_WRITE(sc, mta_reg + (reg << 2), hash);
CSR_WRITE(sc, mta_reg + ((reg - 1) << 2), bit);
} else
CSR_WRITE(sc, mta_reg + (reg << 2), hash);
ETHER_NEXT_MULTI(step, enm);
}
ifp->if_flags &= ~IFF_ALLMULTI;
goto setit;
allmulti:
ifp->if_flags |= IFF_ALLMULTI;
sc->sc_rctl |= RCTL_MPE;
setit:
CSR_WRITE(sc, WMREG_RCTL, sc->sc_rctl);
}
/*
* wm_tbi_mediainit:
*
* Initialize media for use on 1000BASE-X devices.
*/
void
wm_tbi_mediainit(struct wm_softc *sc)
{
const char *sep = "";
if (sc->sc_type < WM_T_82543)
sc->sc_tipg = TIPG_WM_DFLT;
else
sc->sc_tipg = TIPG_LG_DFLT;
ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, wm_tbi_mediachange,
wm_tbi_mediastatus);
/*
* SWD Pins:
*
* 0 = Link LED (output)
* 1 = Loss Of Signal (input)
*/
sc->sc_ctrl |= CTRL_SWDPIO(0);
sc->sc_ctrl &= ~CTRL_SWDPIO(1);
CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl);
#define ADD(ss, mm, dd) \
do { \
printf("%s%s", sep, ss); \
ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|(mm), (dd), NULL); \
sep = ", "; \
} while (/*CONSTCOND*/0)
printf("%s: ", sc->sc_dev.dv_xname);
ADD("1000baseSX", IFM_1000_SX, ANAR_X_HD);
ADD("1000baseSX-FDX", IFM_1000_SX|IFM_FDX, ANAR_X_FD);
ADD("auto", IFM_AUTO, ANAR_X_FD|ANAR_X_HD);
printf("\n");
#undef ADD
ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
}
/*
* wm_tbi_mediastatus: [ifmedia interface function]
*
* Get the current interface media status on a 1000BASE-X device.
*/
void
wm_tbi_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct wm_softc *sc = ifp->if_softc;
ifmr->ifm_status = IFM_AVALID;
ifmr->ifm_active = IFM_ETHER;
if (sc->sc_tbi_linkup == 0) {
ifmr->ifm_active |= IFM_NONE;
return;
}
ifmr->ifm_status |= IFM_ACTIVE;
ifmr->ifm_active |= IFM_1000_SX;
if (CSR_READ(sc, WMREG_STATUS) & STATUS_FD)
ifmr->ifm_active |= IFM_FDX;
}
/*
* wm_tbi_mediachange: [ifmedia interface function]
*
* Set hardware to newly-selected media on a 1000BASE-X device.
*/
int
wm_tbi_mediachange(struct ifnet *ifp)
{
struct wm_softc *sc = ifp->if_softc;
struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur;
uint32_t status;
int i;
sc->sc_txcw = ife->ifm_data;
if (sc->sc_ctrl & CTRL_RFCE)
sc->sc_txcw |= ANAR_X_PAUSE_TOWARDS;
if (sc->sc_ctrl & CTRL_TFCE)
sc->sc_txcw |= ANAR_X_PAUSE_ASYM;
sc->sc_txcw |= TXCW_ANE;
CSR_WRITE(sc, WMREG_TXCW, sc->sc_txcw);
delay(10000);
sc->sc_tbi_anstate = 0;
if ((CSR_READ(sc, WMREG_CTRL) & CTRL_SWDPIN(1)) == 0) {
/* Have signal; wait for the link to come up. */
for (i = 0; i < 50; i++) {
delay(10000);
if (CSR_READ(sc, WMREG_STATUS) & STATUS_LU)
break;
}
status = CSR_READ(sc, WMREG_STATUS);
if (status & STATUS_LU) {
/* Link is up. */
DPRINTF(WM_DEBUG_LINK,
("%s: LINK: set media -> link up %s\n",
sc->sc_dev.dv_xname,
(status & STATUS_FD) ? "FDX" : "HDX"));
sc->sc_tctl &= ~TCTL_COLD(0x3ff);
if (status & STATUS_FD)
sc->sc_tctl |=
TCTL_COLD(TX_COLLISION_DISTANCE_FDX);
else
sc->sc_tctl |=
TCTL_COLD(TX_COLLISION_DISTANCE_HDX);
CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl);
sc->sc_tbi_linkup = 1;
} else {
/* Link is down. */
DPRINTF(WM_DEBUG_LINK,
("%s: LINK: set media -> link down\n",
sc->sc_dev.dv_xname));
sc->sc_tbi_linkup = 0;
}
} else {
DPRINTF(WM_DEBUG_LINK, ("%s: LINK: set media -> no signal\n",
sc->sc_dev.dv_xname));
sc->sc_tbi_linkup = 0;
}
wm_tbi_set_linkled(sc);
return (0);
}
/*
* wm_tbi_set_linkled:
*
* Update the link LED on 1000BASE-X devices.
*/
void
wm_tbi_set_linkled(struct wm_softc *sc)
{
if (sc->sc_tbi_linkup)
sc->sc_ctrl |= CTRL_SWDPIN(0);
else
sc->sc_ctrl &= ~CTRL_SWDPIN(0);
CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl);
}
/*
* wm_tbi_check_link:
*
* Check the link on 1000BASE-X devices.
*/
void
wm_tbi_check_link(struct wm_softc *sc)
{
uint32_t rxcw, ctrl, status;
if (sc->sc_tbi_anstate == 0)
return;
else if (sc->sc_tbi_anstate > 1) {
DPRINTF(WM_DEBUG_LINK,
("%s: LINK: anstate %d\n", sc->sc_dev.dv_xname,
sc->sc_tbi_anstate));
sc->sc_tbi_anstate--;
return;
}
sc->sc_tbi_anstate = 0;
rxcw = CSR_READ(sc, WMREG_RXCW);
ctrl = CSR_READ(sc, WMREG_CTRL);
status = CSR_READ(sc, WMREG_STATUS);
if ((status & STATUS_LU) == 0) {
DPRINTF(WM_DEBUG_LINK,
("%s: LINK: checklink -> down\n", sc->sc_dev.dv_xname));
sc->sc_tbi_linkup = 0;
} else {
DPRINTF(WM_DEBUG_LINK,
("%s: LINK: checklink -> up %s\n", sc->sc_dev.dv_xname,
(status & STATUS_FD) ? "FDX" : "HDX"));
sc->sc_tctl &= ~TCTL_COLD(0x3ff);
if (status & STATUS_FD)
sc->sc_tctl |=
TCTL_COLD(TX_COLLISION_DISTANCE_FDX);
else
sc->sc_tctl |=
TCTL_COLD(TX_COLLISION_DISTANCE_HDX);
CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl);
sc->sc_tbi_linkup = 1;
}
wm_tbi_set_linkled(sc);
}
/*
* wm_gmii_reset:
*
* Reset the PHY.
*/
void
wm_gmii_reset(struct wm_softc *sc)
{
uint32_t reg;
if (sc->sc_type >= WM_T_82544) {
CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl | CTRL_PHY_RESET);
delay(20000);
CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl);
delay(20000);
} else {
/* The PHY reset pin is active-low. */
reg = CSR_READ(sc, WMREG_CTRL_EXT);
reg &= ~((CTRL_EXT_SWDPIO_MASK << CTRL_EXT_SWDPIO_SHIFT) |
CTRL_EXT_SWDPIN(4));
reg |= CTRL_EXT_SWDPIO(4);
CSR_WRITE(sc, WMREG_CTRL_EXT, reg | CTRL_EXT_SWDPIN(4));
delay(10);
CSR_WRITE(sc, WMREG_CTRL_EXT, reg);
delay(10);
CSR_WRITE(sc, WMREG_CTRL_EXT, reg | CTRL_EXT_SWDPIN(4));
delay(10);
#if 0
sc->sc_ctrl_ext = reg | CTRL_EXT_SWDPIN(4);
#endif
}
}
/*
* wm_gmii_mediainit:
*
* Initialize media for use on 1000BASE-T devices.
*/
void
wm_gmii_mediainit(struct wm_softc *sc)
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
/* We have MII. */
sc->sc_flags |= WM_F_HAS_MII;
sc->sc_tipg = TIPG_1000T_DFLT;
/*
* Let the chip set speed/duplex on its own based on
* signals from the PHY.
*/
sc->sc_ctrl |= CTRL_SLU | CTRL_ASDE;
CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl);
/* Initialize our media structures and probe the GMII. */
sc->sc_mii.mii_ifp = ifp;
if (sc->sc_type >= WM_T_82544) {
sc->sc_mii.mii_readreg = wm_gmii_i82544_readreg;
sc->sc_mii.mii_writereg = wm_gmii_i82544_writereg;
} else {
sc->sc_mii.mii_readreg = wm_gmii_i82543_readreg;
sc->sc_mii.mii_writereg = wm_gmii_i82543_writereg;
}
sc->sc_mii.mii_statchg = wm_gmii_statchg;
wm_gmii_reset(sc);
ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, wm_gmii_mediachange,
wm_gmii_mediastatus);
mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
MII_OFFSET_ANY, 0);
if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
} else
ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
}
/*
* wm_gmii_mediastatus: [ifmedia interface function]
*
* Get the current interface media status on a 1000BASE-T device.
*/
void
wm_gmii_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct wm_softc *sc = ifp->if_softc;
mii_pollstat(&sc->sc_mii);
ifmr->ifm_status = sc->sc_mii.mii_media_status;
ifmr->ifm_active = sc->sc_mii.mii_media_active;
}
/*
* wm_gmii_mediachange: [ifmedia interface function]
*
* Set hardware to newly-selected media on a 1000BASE-T device.
*/
int
wm_gmii_mediachange(struct ifnet *ifp)
{
struct wm_softc *sc = ifp->if_softc;
if (ifp->if_flags & IFF_UP)
mii_mediachg(&sc->sc_mii);
return (0);
}
#define MDI_IO CTRL_SWDPIN(2)
#define MDI_DIR CTRL_SWDPIO(2) /* host -> PHY */
#define MDI_CLK CTRL_SWDPIN(3)
static void
i82543_mii_sendbits(struct wm_softc *sc, uint32_t data, int nbits)
{
uint32_t i, v;
v = CSR_READ(sc, WMREG_CTRL);
v &= ~(MDI_IO|MDI_CLK|(CTRL_SWDPIO_MASK << CTRL_SWDPIO_SHIFT));
v |= MDI_DIR | CTRL_SWDPIO(3);
for (i = 1 << (nbits - 1); i != 0; i >>= 1) {
if (data & i)
v |= MDI_IO;
else
v &= ~MDI_IO;
CSR_WRITE(sc, WMREG_CTRL, v);
delay(10);
CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK);
delay(10);
CSR_WRITE(sc, WMREG_CTRL, v);
delay(10);
}
}
static uint32_t
i82543_mii_recvbits(struct wm_softc *sc)
{
uint32_t v, i, data = 0;
v = CSR_READ(sc, WMREG_CTRL);
v &= ~(MDI_IO|MDI_CLK|(CTRL_SWDPIO_MASK << CTRL_SWDPIO_SHIFT));
v |= CTRL_SWDPIO(3);
CSR_WRITE(sc, WMREG_CTRL, v);
delay(10);
CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK);
delay(10);
CSR_WRITE(sc, WMREG_CTRL, v);
delay(10);
for (i = 0; i < 16; i++) {
data <<= 1;
CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK);
delay(10);
if (CSR_READ(sc, WMREG_CTRL) & MDI_IO)
data |= 1;
CSR_WRITE(sc, WMREG_CTRL, v);
delay(10);
}
CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK);
delay(10);
CSR_WRITE(sc, WMREG_CTRL, v);
delay(10);
return (data);
}
#undef MDI_IO
#undef MDI_DIR
#undef MDI_CLK
/*
* wm_gmii_i82543_readreg: [mii interface function]
*
* Read a PHY register on the GMII (i82543 version).
*/
int
wm_gmii_i82543_readreg(struct device *self, int phy, int reg)
{
struct wm_softc *sc = (void *) self;
int rv;
i82543_mii_sendbits(sc, 0xffffffffU, 32);
i82543_mii_sendbits(sc, reg | (phy << 5) |
(MII_COMMAND_READ << 10) | (MII_COMMAND_START << 12), 14);
rv = i82543_mii_recvbits(sc) & 0xffff;
DPRINTF(WM_DEBUG_GMII,
("%s: GMII: read phy %d reg %d -> 0x%04x\n",
sc->sc_dev.dv_xname, phy, reg, rv));
return (rv);
}
/*
* wm_gmii_i82543_writereg: [mii interface function]
*
* Write a PHY register on the GMII (i82543 version).
*/
void
wm_gmii_i82543_writereg(struct device *self, int phy, int reg, int val)
{
struct wm_softc *sc = (void *) self;
i82543_mii_sendbits(sc, 0xffffffffU, 32);
i82543_mii_sendbits(sc, val | (MII_COMMAND_ACK << 16) |
(reg << 18) | (phy << 23) | (MII_COMMAND_WRITE << 28) |
(MII_COMMAND_START << 30), 32);
}
/*
* wm_gmii_i82544_readreg: [mii interface function]
*
* Read a PHY register on the GMII.
*/
int
wm_gmii_i82544_readreg(struct device *self, int phy, int reg)
{
struct wm_softc *sc = (void *) self;
uint32_t mdic;
int i, rv;
CSR_WRITE(sc, WMREG_MDIC, MDIC_OP_READ | MDIC_PHYADD(phy) |
MDIC_REGADD(reg));
for (i = 0; i < 100; i++) {
mdic = CSR_READ(sc, WMREG_MDIC);
if (mdic & MDIC_READY)
break;
delay(10);
}
if ((mdic & MDIC_READY) == 0) {
printf("%s: MDIC read timed out: phy %d reg %d\n",
sc->sc_dev.dv_xname, phy, reg);
rv = 0;
} else if (mdic & MDIC_E) {
#if 0 /* This is normal if no PHY is present. */
printf("%s: MDIC read error: phy %d reg %d\n",
sc->sc_dev.dv_xname, phy, reg);
#endif
rv = 0;
} else {
rv = MDIC_DATA(mdic);
if (rv == 0xffff)
rv = 0;
}
return (rv);
}
/*
* wm_gmii_i82544_writereg: [mii interface function]
*
* Write a PHY register on the GMII.
*/
void
wm_gmii_i82544_writereg(struct device *self, int phy, int reg, int val)
{
struct wm_softc *sc = (void *) self;
uint32_t mdic;
int i;
CSR_WRITE(sc, WMREG_MDIC, MDIC_OP_WRITE | MDIC_PHYADD(phy) |
MDIC_REGADD(reg) | MDIC_DATA(val));
for (i = 0; i < 100; i++) {
mdic = CSR_READ(sc, WMREG_MDIC);
if (mdic & MDIC_READY)
break;
delay(10);
}
if ((mdic & MDIC_READY) == 0)
printf("%s: MDIC write timed out: phy %d reg %d\n",
sc->sc_dev.dv_xname, phy, reg);
else if (mdic & MDIC_E)
printf("%s: MDIC write error: phy %d reg %d\n",
sc->sc_dev.dv_xname, phy, reg);
}
/*
* wm_gmii_statchg: [mii interface function]
*
* Callback from MII layer when media changes.
*/
void
wm_gmii_statchg(struct device *self)
{
struct wm_softc *sc = (void *) self;
sc->sc_tctl &= ~TCTL_COLD(0x3ff);
if (sc->sc_mii.mii_media_active & IFM_FDX) {
DPRINTF(WM_DEBUG_LINK,
("%s: LINK: statchg: FDX\n", sc->sc_dev.dv_xname));
sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_FDX);
} else {
DPRINTF(WM_DEBUG_LINK,
("%s: LINK: statchg: HDX\n", sc->sc_dev.dv_xname));
sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_HDX);
}
CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl);
}