2671 lines
67 KiB
C
2671 lines
67 KiB
C
/* $OpenBSD: if_zyd.c,v 1.52 2007/02/11 00:08:04 jsg Exp $ */
|
|
/* $NetBSD: if_zyd.c,v 1.43 2016/11/25 12:56:29 skrll Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2006 by Damien Bergamini <damien.bergamini@free.fr>
|
|
* Copyright (c) 2006 by Florian Stoehr <ich@florian-stoehr.de>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
/*-
|
|
* ZyDAS ZD1211/ZD1211B USB WLAN driver.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: if_zyd.c,v 1.43 2016/11/25 12:56:29 skrll Exp $");
|
|
|
|
#ifdef _KERNEL_OPT
|
|
#include "opt_usb.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kmem.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/device.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <machine/endian.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_ether.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
|
|
#include <netinet/in.h>
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in_var.h>
|
|
#include <netinet/ip.h>
|
|
|
|
#include <net80211/ieee80211_netbsd.h>
|
|
#include <net80211/ieee80211_var.h>
|
|
#include <net80211/ieee80211_amrr.h>
|
|
#include <net80211/ieee80211_radiotap.h>
|
|
|
|
#include <dev/firmload.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
#include <dev/usb/usbdevs.h>
|
|
|
|
#include <dev/usb/if_zydreg.h>
|
|
|
|
#ifdef ZYD_DEBUG
|
|
#define DPRINTF(x) do { if (zyddebug > 0) printf x; } while (0)
|
|
#define DPRINTFN(n, x) do { if (zyddebug > (n)) printf x; } while (0)
|
|
int zyddebug = 0;
|
|
#else
|
|
#define DPRINTF(x)
|
|
#define DPRINTFN(n, x)
|
|
#endif
|
|
|
|
static const struct zyd_phy_pair zyd_def_phy[] = ZYD_DEF_PHY;
|
|
static const struct zyd_phy_pair zyd_def_phyB[] = ZYD_DEF_PHYB;
|
|
|
|
/* various supported device vendors/products */
|
|
#define ZYD_ZD1211_DEV(v, p) \
|
|
{ { USB_VENDOR_##v, USB_PRODUCT_##v##_##p }, ZYD_ZD1211 }
|
|
#define ZYD_ZD1211B_DEV(v, p) \
|
|
{ { USB_VENDOR_##v, USB_PRODUCT_##v##_##p }, ZYD_ZD1211B }
|
|
static const struct zyd_type {
|
|
struct usb_devno dev;
|
|
uint8_t rev;
|
|
#define ZYD_ZD1211 0
|
|
#define ZYD_ZD1211B 1
|
|
} zyd_devs[] = {
|
|
ZYD_ZD1211_DEV(3COM2, 3CRUSB10075),
|
|
ZYD_ZD1211_DEV(ABOCOM, WL54),
|
|
ZYD_ZD1211_DEV(ASUSTEK, WL159G),
|
|
ZYD_ZD1211_DEV(CYBERTAN, TG54USB),
|
|
ZYD_ZD1211_DEV(DRAYTEK, VIGOR550),
|
|
ZYD_ZD1211_DEV(PLANEX2, GWUS54GD),
|
|
ZYD_ZD1211_DEV(PLANEX2, GWUS54GZL),
|
|
ZYD_ZD1211_DEV(PLANEX3, GWUS54GZ),
|
|
ZYD_ZD1211_DEV(PLANEX3, GWUS54MINI),
|
|
ZYD_ZD1211_DEV(SAGEM, XG760A),
|
|
ZYD_ZD1211_DEV(SENAO, NUB8301),
|
|
ZYD_ZD1211_DEV(SITECOMEU, WL113),
|
|
ZYD_ZD1211_DEV(SWEEX, ZD1211),
|
|
ZYD_ZD1211_DEV(TEKRAM, QUICKWLAN),
|
|
ZYD_ZD1211_DEV(TEKRAM, ZD1211_1),
|
|
ZYD_ZD1211_DEV(TEKRAM, ZD1211_2),
|
|
ZYD_ZD1211_DEV(TWINMOS, G240),
|
|
ZYD_ZD1211_DEV(UMEDIA, ALL0298V2),
|
|
ZYD_ZD1211_DEV(UMEDIA, TEW429UB_A),
|
|
ZYD_ZD1211_DEV(UMEDIA, TEW429UB),
|
|
ZYD_ZD1211_DEV(WISTRONNEWEB, UR055G),
|
|
ZYD_ZD1211_DEV(ZCOM, ZD1211),
|
|
ZYD_ZD1211_DEV(ZYDAS, ZD1211),
|
|
ZYD_ZD1211_DEV(ZYXEL, AG225H),
|
|
ZYD_ZD1211_DEV(ZYXEL, ZYAIRG220),
|
|
ZYD_ZD1211_DEV(ZYXEL, G200V2),
|
|
|
|
ZYD_ZD1211B_DEV(ACCTON, SMCWUSBG),
|
|
ZYD_ZD1211B_DEV(ACCTON, WN4501H_LF_IR),
|
|
ZYD_ZD1211B_DEV(ACCTON, WUS201),
|
|
ZYD_ZD1211B_DEV(ACCTON, ZD1211B),
|
|
ZYD_ZD1211B_DEV(ASUSTEK, A9T_WIFI),
|
|
ZYD_ZD1211B_DEV(BELKIN, F5D7050C),
|
|
ZYD_ZD1211B_DEV(BELKIN, ZD1211B),
|
|
ZYD_ZD1211B_DEV(BEWAN, BWIFI_USB54AR),
|
|
ZYD_ZD1211B_DEV(CISCOLINKSYS, WUSBF54G),
|
|
ZYD_ZD1211B_DEV(CYBERTAN, ZD1211B),
|
|
ZYD_ZD1211B_DEV(FIBERLINE, WL430U),
|
|
ZYD_ZD1211B_DEV(MELCO, KG54L),
|
|
ZYD_ZD1211B_DEV(PHILIPS, SNU5600),
|
|
ZYD_ZD1211B_DEV(PHILIPS, SNU5630NS05),
|
|
ZYD_ZD1211B_DEV(PLANEX2, GWUS54GXS),
|
|
ZYD_ZD1211B_DEV(SAGEM, XG76NA),
|
|
ZYD_ZD1211B_DEV(SITECOMEU, WL603),
|
|
ZYD_ZD1211B_DEV(SITECOMEU, ZD1211B),
|
|
ZYD_ZD1211B_DEV(SONY, IFU_WLM2),
|
|
ZYD_ZD1211B_DEV(UMEDIA, TEW429UBC1),
|
|
ZYD_ZD1211B_DEV(UNKNOWN1, ZD1211B_1),
|
|
ZYD_ZD1211B_DEV(UNKNOWN1, ZD1211B_2),
|
|
ZYD_ZD1211B_DEV(UNKNOWN2, ZD1211B),
|
|
ZYD_ZD1211B_DEV(UNKNOWN3, ZD1211B),
|
|
ZYD_ZD1211B_DEV(USR, USR5423),
|
|
ZYD_ZD1211B_DEV(VTECH, ZD1211B),
|
|
ZYD_ZD1211B_DEV(ZCOM, ZD1211B),
|
|
ZYD_ZD1211B_DEV(ZYDAS, ZD1211B),
|
|
ZYD_ZD1211B_DEV(ZYDAS, ZD1211B_2),
|
|
ZYD_ZD1211B_DEV(ZYXEL, M202),
|
|
ZYD_ZD1211B_DEV(ZYXEL, G220V2),
|
|
};
|
|
#define zyd_lookup(v, p) \
|
|
((const struct zyd_type *)usb_lookup(zyd_devs, v, p))
|
|
|
|
int zyd_match(device_t, cfdata_t, void *);
|
|
void zyd_attach(device_t, device_t, void *);
|
|
int zyd_detach(device_t, int);
|
|
int zyd_activate(device_t, enum devact);
|
|
extern struct cfdriver zyd_cd;
|
|
|
|
CFATTACH_DECL_NEW(zyd, sizeof(struct zyd_softc), zyd_match,
|
|
zyd_attach, zyd_detach, zyd_activate);
|
|
|
|
Static void zyd_attachhook(device_t);
|
|
Static int zyd_complete_attach(struct zyd_softc *);
|
|
Static int zyd_open_pipes(struct zyd_softc *);
|
|
Static void zyd_close_pipes(struct zyd_softc *);
|
|
Static int zyd_alloc_tx_list(struct zyd_softc *);
|
|
Static void zyd_free_tx_list(struct zyd_softc *);
|
|
Static int zyd_alloc_rx_list(struct zyd_softc *);
|
|
Static void zyd_free_rx_list(struct zyd_softc *);
|
|
Static struct ieee80211_node *zyd_node_alloc(struct ieee80211_node_table *);
|
|
Static int zyd_media_change(struct ifnet *);
|
|
Static void zyd_next_scan(void *);
|
|
Static void zyd_task(void *);
|
|
Static int zyd_newstate(struct ieee80211com *, enum ieee80211_state, int);
|
|
Static int zyd_cmd(struct zyd_softc *, uint16_t, const void *, int,
|
|
void *, int, u_int);
|
|
Static int zyd_read16(struct zyd_softc *, uint16_t, uint16_t *);
|
|
Static int zyd_read32(struct zyd_softc *, uint16_t, uint32_t *);
|
|
Static int zyd_write16(struct zyd_softc *, uint16_t, uint16_t);
|
|
Static int zyd_write32(struct zyd_softc *, uint16_t, uint32_t);
|
|
Static int zyd_rfwrite(struct zyd_softc *, uint32_t);
|
|
Static void zyd_lock_phy(struct zyd_softc *);
|
|
Static void zyd_unlock_phy(struct zyd_softc *);
|
|
Static int zyd_rfmd_init(struct zyd_rf *);
|
|
Static int zyd_rfmd_switch_radio(struct zyd_rf *, int);
|
|
Static int zyd_rfmd_set_channel(struct zyd_rf *, uint8_t);
|
|
Static int zyd_al2230_init(struct zyd_rf *);
|
|
Static int zyd_al2230_switch_radio(struct zyd_rf *, int);
|
|
Static int zyd_al2230_set_channel(struct zyd_rf *, uint8_t);
|
|
Static int zyd_al2230_init_b(struct zyd_rf *);
|
|
Static int zyd_al7230B_init(struct zyd_rf *);
|
|
Static int zyd_al7230B_switch_radio(struct zyd_rf *, int);
|
|
Static int zyd_al7230B_set_channel(struct zyd_rf *, uint8_t);
|
|
Static int zyd_al2210_init(struct zyd_rf *);
|
|
Static int zyd_al2210_switch_radio(struct zyd_rf *, int);
|
|
Static int zyd_al2210_set_channel(struct zyd_rf *, uint8_t);
|
|
Static int zyd_gct_init(struct zyd_rf *);
|
|
Static int zyd_gct_switch_radio(struct zyd_rf *, int);
|
|
Static int zyd_gct_set_channel(struct zyd_rf *, uint8_t);
|
|
Static int zyd_maxim_init(struct zyd_rf *);
|
|
Static int zyd_maxim_switch_radio(struct zyd_rf *, int);
|
|
Static int zyd_maxim_set_channel(struct zyd_rf *, uint8_t);
|
|
Static int zyd_maxim2_init(struct zyd_rf *);
|
|
Static int zyd_maxim2_switch_radio(struct zyd_rf *, int);
|
|
Static int zyd_maxim2_set_channel(struct zyd_rf *, uint8_t);
|
|
Static int zyd_rf_attach(struct zyd_softc *, uint8_t);
|
|
Static const char *zyd_rf_name(uint8_t);
|
|
Static int zyd_hw_init(struct zyd_softc *);
|
|
Static int zyd_read_eeprom(struct zyd_softc *);
|
|
Static int zyd_set_macaddr(struct zyd_softc *, const uint8_t *);
|
|
Static int zyd_set_bssid(struct zyd_softc *, const uint8_t *);
|
|
Static int zyd_switch_radio(struct zyd_softc *, int);
|
|
Static void zyd_set_led(struct zyd_softc *, int, int);
|
|
Static int zyd_set_rxfilter(struct zyd_softc *);
|
|
Static void zyd_set_chan(struct zyd_softc *, struct ieee80211_channel *);
|
|
Static int zyd_set_beacon_interval(struct zyd_softc *, int);
|
|
Static uint8_t zyd_plcp_signal(int);
|
|
Static void zyd_intr(struct usbd_xfer *, void *, usbd_status);
|
|
Static void zyd_rx_data(struct zyd_softc *, const uint8_t *, uint16_t);
|
|
Static void zyd_rxeof(struct usbd_xfer *, void *, usbd_status);
|
|
Static void zyd_txeof(struct usbd_xfer *, void *, usbd_status);
|
|
Static int zyd_tx_mgt(struct zyd_softc *, struct mbuf *,
|
|
struct ieee80211_node *);
|
|
Static int zyd_tx_data(struct zyd_softc *, struct mbuf *,
|
|
struct ieee80211_node *);
|
|
Static void zyd_start(struct ifnet *);
|
|
Static void zyd_watchdog(struct ifnet *);
|
|
Static int zyd_ioctl(struct ifnet *, u_long, void *);
|
|
Static int zyd_init(struct ifnet *);
|
|
Static void zyd_stop(struct ifnet *, int);
|
|
Static int zyd_loadfirmware(struct zyd_softc *, u_char *, size_t);
|
|
Static void zyd_iter_func(void *, struct ieee80211_node *);
|
|
Static void zyd_amrr_timeout(void *);
|
|
Static void zyd_newassoc(struct ieee80211_node *, int);
|
|
|
|
static const struct ieee80211_rateset zyd_rateset_11b =
|
|
{ 4, { 2, 4, 11, 22 } };
|
|
|
|
static const struct ieee80211_rateset zyd_rateset_11g =
|
|
{ 12, { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 } };
|
|
|
|
int
|
|
zyd_match(device_t parent, cfdata_t match, void *aux)
|
|
{
|
|
struct usb_attach_arg *uaa = aux;
|
|
|
|
return (zyd_lookup(uaa->uaa_vendor, uaa->uaa_product) != NULL) ?
|
|
UMATCH_VENDOR_PRODUCT : UMATCH_NONE;
|
|
}
|
|
|
|
Static void
|
|
zyd_attachhook(device_t self)
|
|
{
|
|
struct zyd_softc *sc = device_private(self);
|
|
firmware_handle_t fwh;
|
|
const char *fwname;
|
|
u_char *fw;
|
|
size_t size;
|
|
int error;
|
|
|
|
fwname = (sc->mac_rev == ZYD_ZD1211) ? "zyd-zd1211" : "zyd-zd1211b";
|
|
if ((error = firmware_open("zyd", fwname, &fwh)) != 0) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"failed to open firmware %s (error=%d)\n", fwname, error);
|
|
return;
|
|
}
|
|
size = firmware_get_size(fwh);
|
|
fw = firmware_malloc(size);
|
|
if (fw == NULL) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"failed to allocate firmware memory\n");
|
|
firmware_close(fwh);
|
|
return;
|
|
}
|
|
error = firmware_read(fwh, 0, fw, size);
|
|
firmware_close(fwh);
|
|
if (error != 0) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"failed to read firmware (error %d)\n", error);
|
|
firmware_free(fw, size);
|
|
return;
|
|
}
|
|
|
|
error = zyd_loadfirmware(sc, fw, size);
|
|
if (error != 0) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"could not load firmware (error=%d)\n", error);
|
|
firmware_free(fw, size);
|
|
return;
|
|
}
|
|
|
|
firmware_free(fw, size);
|
|
sc->sc_flags |= ZD1211_FWLOADED;
|
|
|
|
/* complete the attach process */
|
|
if ((error = zyd_complete_attach(sc)) == 0)
|
|
sc->attached = 1;
|
|
return;
|
|
}
|
|
|
|
void
|
|
zyd_attach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct zyd_softc *sc = device_private(self);
|
|
struct usb_attach_arg *uaa = aux;
|
|
char *devinfop;
|
|
usb_device_descriptor_t* ddesc;
|
|
struct ifnet *ifp = &sc->sc_if;
|
|
|
|
sc->sc_dev = self;
|
|
sc->sc_udev = uaa->uaa_device;
|
|
sc->sc_flags = 0;
|
|
|
|
aprint_naive("\n");
|
|
aprint_normal("\n");
|
|
|
|
devinfop = usbd_devinfo_alloc(uaa->uaa_device, 0);
|
|
aprint_normal_dev(self, "%s\n", devinfop);
|
|
usbd_devinfo_free(devinfop);
|
|
|
|
sc->mac_rev = zyd_lookup(uaa->uaa_vendor, uaa->uaa_product)->rev;
|
|
|
|
ddesc = usbd_get_device_descriptor(sc->sc_udev);
|
|
if (UGETW(ddesc->bcdDevice) < 0x4330) {
|
|
aprint_error_dev(self, "device version mismatch: 0x%x "
|
|
"(only >= 43.30 supported)\n", UGETW(ddesc->bcdDevice));
|
|
return;
|
|
}
|
|
|
|
ifp->if_softc = sc;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_init = zyd_init;
|
|
ifp->if_ioctl = zyd_ioctl;
|
|
ifp->if_start = zyd_start;
|
|
ifp->if_watchdog = zyd_watchdog;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN);
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
memcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ);
|
|
|
|
SIMPLEQ_INIT(&sc->sc_rqh);
|
|
|
|
/* defer configrations after file system is ready to load firmware */
|
|
config_mountroot(self, zyd_attachhook);
|
|
}
|
|
|
|
Static int
|
|
zyd_complete_attach(struct zyd_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifnet *ifp = &sc->sc_if;
|
|
usbd_status error;
|
|
int i;
|
|
|
|
usb_init_task(&sc->sc_task, zyd_task, sc, 0);
|
|
callout_init(&(sc->sc_scan_ch), 0);
|
|
|
|
sc->amrr.amrr_min_success_threshold = 1;
|
|
sc->amrr.amrr_max_success_threshold = 10;
|
|
callout_init(&sc->sc_amrr_ch, 0);
|
|
|
|
error = usbd_set_config_no(sc->sc_udev, ZYD_CONFIG_NO, 1);
|
|
if (error != 0) {
|
|
aprint_error_dev(sc->sc_dev, "failed to set configuration"
|
|
", err=%s\n", usbd_errstr(error));
|
|
goto fail;
|
|
}
|
|
|
|
error = usbd_device2interface_handle(sc->sc_udev, ZYD_IFACE_INDEX,
|
|
&sc->sc_iface);
|
|
if (error != 0) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"getting interface handle failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
if ((error = zyd_open_pipes(sc)) != 0) {
|
|
aprint_error_dev(sc->sc_dev, "could not open pipes\n");
|
|
goto fail;
|
|
}
|
|
|
|
if ((error = zyd_read_eeprom(sc)) != 0) {
|
|
aprint_error_dev(sc->sc_dev, "could not read EEPROM\n");
|
|
goto fail;
|
|
}
|
|
|
|
if ((error = zyd_rf_attach(sc, sc->rf_rev)) != 0) {
|
|
aprint_error_dev(sc->sc_dev, "could not attach RF\n");
|
|
goto fail;
|
|
}
|
|
|
|
if ((error = zyd_hw_init(sc)) != 0) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"hardware initialization failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
aprint_normal_dev(sc->sc_dev,
|
|
"HMAC ZD1211%s, FW %02x.%02x, RF %s, PA %x, address %s\n",
|
|
(sc->mac_rev == ZYD_ZD1211) ? "": "B",
|
|
sc->fw_rev >> 8, sc->fw_rev & 0xff, zyd_rf_name(sc->rf_rev),
|
|
sc->pa_rev, ether_sprintf(ic->ic_myaddr));
|
|
|
|
ic->ic_ifp = ifp;
|
|
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
|
|
ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */
|
|
ic->ic_state = IEEE80211_S_INIT;
|
|
|
|
/* set device capabilities */
|
|
ic->ic_caps =
|
|
IEEE80211_C_MONITOR | /* monitor mode supported */
|
|
IEEE80211_C_TXPMGT | /* tx power management */
|
|
IEEE80211_C_SHPREAMBLE | /* short preamble supported */
|
|
IEEE80211_C_WEP; /* s/w WEP */
|
|
|
|
/* set supported .11b and .11g rates */
|
|
ic->ic_sup_rates[IEEE80211_MODE_11B] = zyd_rateset_11b;
|
|
ic->ic_sup_rates[IEEE80211_MODE_11G] = zyd_rateset_11g;
|
|
|
|
/* set supported .11b and .11g channels (1 through 14) */
|
|
for (i = 1; i <= 14; i++) {
|
|
ic->ic_channels[i].ic_freq =
|
|
ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ);
|
|
ic->ic_channels[i].ic_flags =
|
|
IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM |
|
|
IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
|
|
}
|
|
|
|
if_attach(ifp);
|
|
ieee80211_ifattach(ic);
|
|
ic->ic_node_alloc = zyd_node_alloc;
|
|
ic->ic_newassoc = zyd_newassoc;
|
|
|
|
/* override state transition machine */
|
|
sc->sc_newstate = ic->ic_newstate;
|
|
ic->ic_newstate = zyd_newstate;
|
|
ieee80211_media_init(ic, zyd_media_change, ieee80211_media_status);
|
|
|
|
bpf_attach2(ifp, DLT_IEEE802_11_RADIO,
|
|
sizeof(struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN,
|
|
&sc->sc_drvbpf);
|
|
|
|
sc->sc_rxtap_len = sizeof(sc->sc_rxtapu);
|
|
sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len);
|
|
sc->sc_rxtap.wr_ihdr.it_present = htole32(ZYD_RX_RADIOTAP_PRESENT);
|
|
|
|
sc->sc_txtap_len = sizeof(sc->sc_txtapu);
|
|
sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len);
|
|
sc->sc_txtap.wt_ihdr.it_present = htole32(ZYD_TX_RADIOTAP_PRESENT);
|
|
|
|
ieee80211_announce(ic);
|
|
|
|
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev);
|
|
|
|
fail: return error;
|
|
}
|
|
|
|
int
|
|
zyd_detach(device_t self, int flags)
|
|
{
|
|
struct zyd_softc *sc = device_private(self);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifnet *ifp = &sc->sc_if;
|
|
int s;
|
|
|
|
if (!sc->attached)
|
|
return 0;
|
|
|
|
s = splusb();
|
|
|
|
zyd_stop(ifp, 1);
|
|
usb_rem_task(sc->sc_udev, &sc->sc_task);
|
|
callout_stop(&sc->sc_scan_ch);
|
|
callout_stop(&sc->sc_amrr_ch);
|
|
|
|
/* Abort, etc. done by zyd_stop */
|
|
zyd_close_pipes(sc);
|
|
|
|
sc->attached = 0;
|
|
|
|
bpf_detach(ifp);
|
|
ieee80211_ifdetach(ic);
|
|
if_detach(ifp);
|
|
|
|
splx(s);
|
|
|
|
usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, sc->sc_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_open_pipes(struct zyd_softc *sc)
|
|
{
|
|
usb_endpoint_descriptor_t *edesc;
|
|
usbd_status error;
|
|
|
|
/* interrupt in */
|
|
edesc = usbd_get_endpoint_descriptor(sc->sc_iface, 0x83);
|
|
if (edesc == NULL)
|
|
return EINVAL;
|
|
|
|
sc->ibuf_size = UGETW(edesc->wMaxPacketSize);
|
|
if (sc->ibuf_size == 0) /* should not happen */
|
|
return EINVAL;
|
|
|
|
sc->ibuf = kmem_alloc(sc->ibuf_size, KM_SLEEP);
|
|
if (sc->ibuf == NULL)
|
|
return ENOMEM;
|
|
|
|
error = usbd_open_pipe_intr(sc->sc_iface, 0x83, USBD_SHORT_XFER_OK,
|
|
&sc->zyd_ep[ZYD_ENDPT_IIN], sc, sc->ibuf, sc->ibuf_size, zyd_intr,
|
|
USBD_DEFAULT_INTERVAL);
|
|
if (error != 0) {
|
|
printf("%s: open rx intr pipe failed: %s\n",
|
|
device_xname(sc->sc_dev), usbd_errstr(error));
|
|
goto fail;
|
|
}
|
|
|
|
/* interrupt out (not necessarily an interrupt pipe) */
|
|
error = usbd_open_pipe(sc->sc_iface, 0x04, USBD_EXCLUSIVE_USE,
|
|
&sc->zyd_ep[ZYD_ENDPT_IOUT]);
|
|
if (error != 0) {
|
|
printf("%s: open tx intr pipe failed: %s\n",
|
|
device_xname(sc->sc_dev), usbd_errstr(error));
|
|
goto fail;
|
|
}
|
|
|
|
/* bulk in */
|
|
error = usbd_open_pipe(sc->sc_iface, 0x82, USBD_EXCLUSIVE_USE,
|
|
&sc->zyd_ep[ZYD_ENDPT_BIN]);
|
|
if (error != 0) {
|
|
printf("%s: open rx pipe failed: %s\n",
|
|
device_xname(sc->sc_dev), usbd_errstr(error));
|
|
goto fail;
|
|
}
|
|
|
|
/* bulk out */
|
|
error = usbd_open_pipe(sc->sc_iface, 0x01, USBD_EXCLUSIVE_USE,
|
|
&sc->zyd_ep[ZYD_ENDPT_BOUT]);
|
|
if (error != 0) {
|
|
printf("%s: open tx pipe failed: %s\n",
|
|
device_xname(sc->sc_dev), usbd_errstr(error));
|
|
goto fail;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail: zyd_close_pipes(sc);
|
|
return error;
|
|
}
|
|
|
|
Static void
|
|
zyd_close_pipes(struct zyd_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ZYD_ENDPT_CNT; i++) {
|
|
if (sc->zyd_ep[i] != NULL) {
|
|
usbd_close_pipe(sc->zyd_ep[i]);
|
|
sc->zyd_ep[i] = NULL;
|
|
}
|
|
}
|
|
if (sc->ibuf != NULL) {
|
|
kmem_free(sc->ibuf, sc->ibuf_size);
|
|
sc->ibuf = NULL;
|
|
}
|
|
}
|
|
|
|
Static int
|
|
zyd_alloc_tx_list(struct zyd_softc *sc)
|
|
{
|
|
int i, error;
|
|
|
|
sc->tx_queued = 0;
|
|
|
|
for (i = 0; i < ZYD_TX_LIST_CNT; i++) {
|
|
struct zyd_tx_data *data = &sc->tx_data[i];
|
|
|
|
data->sc = sc; /* backpointer for callbacks */
|
|
|
|
error = usbd_create_xfer(sc->zyd_ep[ZYD_ENDPT_BOUT],
|
|
ZYD_MAX_TXBUFSZ, USBD_FORCE_SHORT_XFER, 0, &data->xfer);
|
|
if (error) {
|
|
printf("%s: could not allocate tx xfer\n",
|
|
device_xname(sc->sc_dev));
|
|
goto fail;
|
|
}
|
|
data->buf = usbd_get_buffer(data->xfer);
|
|
|
|
/* clear Tx descriptor */
|
|
memset(data->buf, 0, sizeof(struct zyd_tx_desc));
|
|
}
|
|
return 0;
|
|
|
|
fail: zyd_free_tx_list(sc);
|
|
return error;
|
|
}
|
|
|
|
Static void
|
|
zyd_free_tx_list(struct zyd_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ZYD_TX_LIST_CNT; i++) {
|
|
struct zyd_tx_data *data = &sc->tx_data[i];
|
|
|
|
if (data->xfer != NULL) {
|
|
usbd_destroy_xfer(data->xfer);
|
|
data->xfer = NULL;
|
|
}
|
|
if (data->ni != NULL) {
|
|
ieee80211_free_node(data->ni);
|
|
data->ni = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
Static int
|
|
zyd_alloc_rx_list(struct zyd_softc *sc)
|
|
{
|
|
int i, error;
|
|
|
|
for (i = 0; i < ZYD_RX_LIST_CNT; i++) {
|
|
struct zyd_rx_data *data = &sc->rx_data[i];
|
|
|
|
data->sc = sc; /* backpointer for callbacks */
|
|
|
|
error = usbd_create_xfer(sc->zyd_ep[ZYD_ENDPT_BIN],
|
|
ZYX_MAX_RXBUFSZ, USBD_SHORT_XFER_OK, 0, &data->xfer);
|
|
if (error) {
|
|
printf("%s: could not allocate rx xfer\n",
|
|
device_xname(sc->sc_dev));
|
|
goto fail;
|
|
}
|
|
data->buf = usbd_get_buffer(data->xfer);
|
|
}
|
|
return 0;
|
|
|
|
fail: zyd_free_rx_list(sc);
|
|
return error;
|
|
}
|
|
|
|
Static void
|
|
zyd_free_rx_list(struct zyd_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ZYD_RX_LIST_CNT; i++) {
|
|
struct zyd_rx_data *data = &sc->rx_data[i];
|
|
|
|
if (data->xfer != NULL) {
|
|
usbd_destroy_xfer(data->xfer);
|
|
data->xfer = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* ARGUSED */
|
|
Static struct ieee80211_node *
|
|
zyd_node_alloc(struct ieee80211_node_table *nt __unused)
|
|
{
|
|
struct zyd_node *zn;
|
|
|
|
zn = malloc(sizeof(struct zyd_node), M_80211_NODE, M_NOWAIT | M_ZERO);
|
|
|
|
return &zn->ni;
|
|
}
|
|
|
|
Static int
|
|
zyd_media_change(struct ifnet *ifp)
|
|
{
|
|
int error;
|
|
|
|
error = ieee80211_media_change(ifp);
|
|
if (error != ENETRESET)
|
|
return error;
|
|
|
|
if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING))
|
|
zyd_init(ifp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function is called periodically (every 200ms) during scanning to
|
|
* switch from one channel to another.
|
|
*/
|
|
Static void
|
|
zyd_next_scan(void *arg)
|
|
{
|
|
struct zyd_softc *sc = arg;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
if (ic->ic_state == IEEE80211_S_SCAN)
|
|
ieee80211_next_scan(ic);
|
|
}
|
|
|
|
Static void
|
|
zyd_task(void *arg)
|
|
{
|
|
struct zyd_softc *sc = arg;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
enum ieee80211_state ostate;
|
|
|
|
ostate = ic->ic_state;
|
|
|
|
switch (sc->sc_state) {
|
|
case IEEE80211_S_INIT:
|
|
if (ostate == IEEE80211_S_RUN) {
|
|
/* turn link LED off */
|
|
zyd_set_led(sc, ZYD_LED1, 0);
|
|
|
|
/* stop data LED from blinking */
|
|
zyd_write32(sc, sc->fwbase + ZYD_FW_LINK_STATUS, 0);
|
|
}
|
|
break;
|
|
|
|
case IEEE80211_S_SCAN:
|
|
zyd_set_chan(sc, ic->ic_curchan);
|
|
callout_reset(&sc->sc_scan_ch, hz / 5, zyd_next_scan, sc);
|
|
break;
|
|
|
|
case IEEE80211_S_AUTH:
|
|
case IEEE80211_S_ASSOC:
|
|
zyd_set_chan(sc, ic->ic_curchan);
|
|
break;
|
|
|
|
case IEEE80211_S_RUN:
|
|
{
|
|
struct ieee80211_node *ni = ic->ic_bss;
|
|
|
|
zyd_set_chan(sc, ic->ic_curchan);
|
|
|
|
if (ic->ic_opmode != IEEE80211_M_MONITOR) {
|
|
/* turn link LED on */
|
|
zyd_set_led(sc, ZYD_LED1, 1);
|
|
|
|
/* make data LED blink upon Tx */
|
|
zyd_write32(sc, sc->fwbase + ZYD_FW_LINK_STATUS, 1);
|
|
|
|
zyd_set_bssid(sc, ni->ni_bssid);
|
|
}
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_STA) {
|
|
/* fake a join to init the tx rate */
|
|
zyd_newassoc(ni, 1);
|
|
}
|
|
|
|
/* start automatic rate control timer */
|
|
if (ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE)
|
|
callout_reset(&sc->sc_amrr_ch, hz, zyd_amrr_timeout, sc);
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
sc->sc_newstate(ic, sc->sc_state, -1);
|
|
}
|
|
|
|
Static int
|
|
zyd_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
|
|
{
|
|
struct zyd_softc *sc = ic->ic_ifp->if_softc;
|
|
|
|
if (!sc->attached)
|
|
return ENXIO;
|
|
|
|
usb_rem_task(sc->sc_udev, &sc->sc_task);
|
|
callout_stop(&sc->sc_scan_ch);
|
|
callout_stop(&sc->sc_amrr_ch);
|
|
|
|
/* do it in a process context */
|
|
sc->sc_state = nstate;
|
|
usb_add_task(sc->sc_udev, &sc->sc_task, USB_TASKQ_DRIVER);
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_cmd(struct zyd_softc *sc, uint16_t code, const void *idata, int ilen,
|
|
void *odata, int olen, u_int flags)
|
|
{
|
|
struct usbd_xfer *xfer;
|
|
struct zyd_cmd cmd;
|
|
struct rq rq;
|
|
uint16_t xferflags;
|
|
int error;
|
|
usbd_status uerror;
|
|
int s = 0;
|
|
|
|
error = usbd_create_xfer(sc->zyd_ep[ZYD_ENDPT_IOUT],
|
|
sizeof(uint16_t) + ilen, USBD_FORCE_SHORT_XFER, 0, &xfer);
|
|
if (error)
|
|
return error;
|
|
|
|
cmd.code = htole16(code);
|
|
memcpy(cmd.data, idata, ilen);
|
|
|
|
xferflags = USBD_FORCE_SHORT_XFER;
|
|
if (!(flags & ZYD_CMD_FLAG_READ))
|
|
xferflags |= USBD_SYNCHRONOUS;
|
|
else {
|
|
s = splusb();
|
|
rq.idata = idata;
|
|
rq.odata = odata;
|
|
rq.len = olen / sizeof(struct zyd_pair);
|
|
SIMPLEQ_INSERT_TAIL(&sc->sc_rqh, &rq, rq);
|
|
}
|
|
|
|
usbd_setup_xfer(xfer, 0, &cmd, sizeof(uint16_t) + ilen, xferflags,
|
|
ZYD_INTR_TIMEOUT, NULL);
|
|
uerror = usbd_transfer(xfer);
|
|
if (uerror != USBD_IN_PROGRESS && uerror != 0) {
|
|
if (flags & ZYD_CMD_FLAG_READ)
|
|
splx(s);
|
|
printf("%s: could not send command (error=%s)\n",
|
|
device_xname(sc->sc_dev), usbd_errstr(uerror));
|
|
(void)usbd_destroy_xfer(xfer);
|
|
return EIO;
|
|
}
|
|
if (!(flags & ZYD_CMD_FLAG_READ)) {
|
|
(void)usbd_destroy_xfer(xfer);
|
|
return 0; /* write: don't wait for reply */
|
|
}
|
|
/* wait at most one second for command reply */
|
|
error = tsleep(odata, PCATCH, "zydcmd", hz);
|
|
if (error == EWOULDBLOCK)
|
|
printf("%s: zyd_read sleep timeout\n", device_xname(sc->sc_dev));
|
|
SIMPLEQ_REMOVE(&sc->sc_rqh, &rq, rq, rq);
|
|
splx(s);
|
|
|
|
(void)usbd_destroy_xfer(xfer);
|
|
return error;
|
|
}
|
|
|
|
Static int
|
|
zyd_read16(struct zyd_softc *sc, uint16_t reg, uint16_t *val)
|
|
{
|
|
struct zyd_pair tmp;
|
|
int error;
|
|
|
|
reg = htole16(reg);
|
|
error = zyd_cmd(sc, ZYD_CMD_IORD, ®, sizeof(reg), &tmp, sizeof(tmp),
|
|
ZYD_CMD_FLAG_READ);
|
|
if (error == 0)
|
|
*val = le16toh(tmp.val);
|
|
else
|
|
*val = 0;
|
|
return error;
|
|
}
|
|
|
|
Static int
|
|
zyd_read32(struct zyd_softc *sc, uint16_t reg, uint32_t *val)
|
|
{
|
|
struct zyd_pair tmp[2];
|
|
uint16_t regs[2];
|
|
int error;
|
|
|
|
regs[0] = htole16(ZYD_REG32_HI(reg));
|
|
regs[1] = htole16(ZYD_REG32_LO(reg));
|
|
error = zyd_cmd(sc, ZYD_CMD_IORD, regs, sizeof(regs), tmp, sizeof(tmp),
|
|
ZYD_CMD_FLAG_READ);
|
|
if (error == 0)
|
|
*val = le16toh(tmp[0].val) << 16 | le16toh(tmp[1].val);
|
|
else
|
|
*val = 0;
|
|
return error;
|
|
}
|
|
|
|
Static int
|
|
zyd_write16(struct zyd_softc *sc, uint16_t reg, uint16_t val)
|
|
{
|
|
struct zyd_pair pair;
|
|
|
|
pair.reg = htole16(reg);
|
|
pair.val = htole16(val);
|
|
|
|
return zyd_cmd(sc, ZYD_CMD_IOWR, &pair, sizeof(pair), NULL, 0, 0);
|
|
}
|
|
|
|
Static int
|
|
zyd_write32(struct zyd_softc *sc, uint16_t reg, uint32_t val)
|
|
{
|
|
struct zyd_pair pair[2];
|
|
|
|
pair[0].reg = htole16(ZYD_REG32_HI(reg));
|
|
pair[0].val = htole16(val >> 16);
|
|
pair[1].reg = htole16(ZYD_REG32_LO(reg));
|
|
pair[1].val = htole16(val & 0xffff);
|
|
|
|
return zyd_cmd(sc, ZYD_CMD_IOWR, pair, sizeof(pair), NULL, 0, 0);
|
|
}
|
|
|
|
Static int
|
|
zyd_rfwrite(struct zyd_softc *sc, uint32_t val)
|
|
{
|
|
struct zyd_rf *rf = &sc->sc_rf;
|
|
struct zyd_rfwrite req;
|
|
uint16_t cr203;
|
|
int i;
|
|
|
|
(void)zyd_read16(sc, ZYD_CR203, &cr203);
|
|
cr203 &= ~(ZYD_RF_IF_LE | ZYD_RF_CLK | ZYD_RF_DATA);
|
|
|
|
req.code = htole16(2);
|
|
req.width = htole16(rf->width);
|
|
for (i = 0; i < rf->width; i++) {
|
|
req.bit[i] = htole16(cr203);
|
|
if (val & (1 << (rf->width - 1 - i)))
|
|
req.bit[i] |= htole16(ZYD_RF_DATA);
|
|
}
|
|
return zyd_cmd(sc, ZYD_CMD_RFCFG, &req, 4 + 2 * rf->width, NULL, 0, 0);
|
|
}
|
|
|
|
Static void
|
|
zyd_lock_phy(struct zyd_softc *sc)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
(void)zyd_read32(sc, ZYD_MAC_MISC, &tmp);
|
|
tmp &= ~ZYD_UNLOCK_PHY_REGS;
|
|
(void)zyd_write32(sc, ZYD_MAC_MISC, tmp);
|
|
}
|
|
|
|
Static void
|
|
zyd_unlock_phy(struct zyd_softc *sc)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
(void)zyd_read32(sc, ZYD_MAC_MISC, &tmp);
|
|
tmp |= ZYD_UNLOCK_PHY_REGS;
|
|
(void)zyd_write32(sc, ZYD_MAC_MISC, tmp);
|
|
}
|
|
|
|
/*
|
|
* RFMD RF methods.
|
|
*/
|
|
Static int
|
|
zyd_rfmd_init(struct zyd_rf *rf)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct zyd_phy_pair phyini[] = ZYD_RFMD_PHY;
|
|
static const uint32_t rfini[] = ZYD_RFMD_RF;
|
|
int error;
|
|
size_t i;
|
|
|
|
/* init RF-dependent PHY registers */
|
|
for (i = 0; i < __arraycount(phyini); i++) {
|
|
error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
|
|
/* init RFMD radio */
|
|
for (i = 0; i < __arraycount(rfini); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
|
|
return error;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_rfmd_switch_radio(struct zyd_rf *rf, int on)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
|
|
(void)zyd_write16(sc, ZYD_CR10, on ? 0x89 : 0x15);
|
|
(void)zyd_write16(sc, ZYD_CR11, on ? 0x00 : 0x81);
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_rfmd_set_channel(struct zyd_rf *rf, uint8_t chan)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct {
|
|
uint32_t r1, r2;
|
|
} rfprog[] = ZYD_RFMD_CHANTABLE;
|
|
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1].r1);
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1].r2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* AL2230 RF methods.
|
|
*/
|
|
Static int
|
|
zyd_al2230_init(struct zyd_rf *rf)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct zyd_phy_pair phyini[] = ZYD_AL2230_PHY;
|
|
static const struct zyd_phy_pair phy2230s[] = ZYD_AL2230S_PHY_INIT;
|
|
static const uint32_t rfini[] = ZYD_AL2230_RF;
|
|
int error;
|
|
size_t i;
|
|
|
|
/* init RF-dependent PHY registers */
|
|
for (i = 0; i < __arraycount(phyini); i++) {
|
|
error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
|
|
if (sc->rf_rev == ZYD_RF_AL2230S) {
|
|
for (i = 0; i < __arraycount(phy2230s); i++) {
|
|
error = zyd_write16(sc, phy2230s[i].reg,
|
|
phy2230s[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
}
|
|
|
|
/* init AL2230 radio */
|
|
for (i = 0; i < __arraycount(rfini); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
|
|
return error;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_al2230_init_b(struct zyd_rf *rf)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct zyd_phy_pair phyini[] = ZYD_AL2230_PHY_B;
|
|
static const uint32_t rfini[] = ZYD_AL2230_RF_B;
|
|
int error;
|
|
size_t i;
|
|
|
|
/* init RF-dependent PHY registers */
|
|
for (i = 0; i < __arraycount(phyini); i++) {
|
|
error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
|
|
/* init AL2230 radio */
|
|
for (i = 0; i < __arraycount(rfini); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
|
|
return error;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_al2230_switch_radio(struct zyd_rf *rf, int on)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
int on251 = (sc->mac_rev == ZYD_ZD1211) ? 0x3f : 0x7f;
|
|
|
|
(void)zyd_write16(sc, ZYD_CR11, on ? 0x00 : 0x04);
|
|
(void)zyd_write16(sc, ZYD_CR251, on ? on251 : 0x2f);
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_al2230_set_channel(struct zyd_rf *rf, uint8_t chan)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct {
|
|
uint32_t r1, r2, r3;
|
|
} rfprog[] = ZYD_AL2230_CHANTABLE;
|
|
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1].r1);
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1].r2);
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1].r3);
|
|
|
|
(void)zyd_write16(sc, ZYD_CR138, 0x28);
|
|
(void)zyd_write16(sc, ZYD_CR203, 0x06);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* AL7230B RF methods.
|
|
*/
|
|
Static int
|
|
zyd_al7230B_init(struct zyd_rf *rf)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct zyd_phy_pair phyini_1[] = ZYD_AL7230B_PHY_1;
|
|
static const struct zyd_phy_pair phyini_2[] = ZYD_AL7230B_PHY_2;
|
|
static const struct zyd_phy_pair phyini_3[] = ZYD_AL7230B_PHY_3;
|
|
static const uint32_t rfini_1[] = ZYD_AL7230B_RF_1;
|
|
static const uint32_t rfini_2[] = ZYD_AL7230B_RF_2;
|
|
int error;
|
|
size_t i;
|
|
|
|
/* for AL7230B, PHY and RF need to be initialized in "phases" */
|
|
|
|
/* init RF-dependent PHY registers, part one */
|
|
for (i = 0; i < __arraycount(phyini_1); i++) {
|
|
error = zyd_write16(sc, phyini_1[i].reg, phyini_1[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
/* init AL7230B radio, part one */
|
|
for (i = 0; i < __arraycount(rfini_1); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfini_1[i])) != 0)
|
|
return error;
|
|
}
|
|
/* init RF-dependent PHY registers, part two */
|
|
for (i = 0; i < __arraycount(phyini_2); i++) {
|
|
error = zyd_write16(sc, phyini_2[i].reg, phyini_2[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
/* init AL7230B radio, part two */
|
|
for (i = 0; i < __arraycount(rfini_2); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfini_2[i])) != 0)
|
|
return error;
|
|
}
|
|
/* init RF-dependent PHY registers, part three */
|
|
for (i = 0; i < __arraycount(phyini_3); i++) {
|
|
error = zyd_write16(sc, phyini_3[i].reg, phyini_3[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_al7230B_switch_radio(struct zyd_rf *rf, int on)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
|
|
(void)zyd_write16(sc, ZYD_CR11, on ? 0x00 : 0x04);
|
|
(void)zyd_write16(sc, ZYD_CR251, on ? 0x3f : 0x2f);
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_al7230B_set_channel(struct zyd_rf *rf, uint8_t chan)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct {
|
|
uint32_t r1, r2;
|
|
} rfprog[] = ZYD_AL7230B_CHANTABLE;
|
|
static const uint32_t rfsc[] = ZYD_AL7230B_RF_SETCHANNEL;
|
|
int error;
|
|
size_t i;
|
|
|
|
(void)zyd_write16(sc, ZYD_CR240, 0x57);
|
|
(void)zyd_write16(sc, ZYD_CR251, 0x2f);
|
|
|
|
for (i = 0; i < __arraycount(rfsc); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfsc[i])) != 0)
|
|
return error;
|
|
}
|
|
|
|
(void)zyd_write16(sc, ZYD_CR128, 0x14);
|
|
(void)zyd_write16(sc, ZYD_CR129, 0x12);
|
|
(void)zyd_write16(sc, ZYD_CR130, 0x10);
|
|
(void)zyd_write16(sc, ZYD_CR38, 0x38);
|
|
(void)zyd_write16(sc, ZYD_CR136, 0xdf);
|
|
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1].r1);
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1].r2);
|
|
(void)zyd_rfwrite(sc, 0x3c9000);
|
|
|
|
(void)zyd_write16(sc, ZYD_CR251, 0x3f);
|
|
(void)zyd_write16(sc, ZYD_CR203, 0x06);
|
|
(void)zyd_write16(sc, ZYD_CR240, 0x08);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* AL2210 RF methods.
|
|
*/
|
|
Static int
|
|
zyd_al2210_init(struct zyd_rf *rf)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct zyd_phy_pair phyini[] = ZYD_AL2210_PHY;
|
|
static const uint32_t rfini[] = ZYD_AL2210_RF;
|
|
uint32_t tmp;
|
|
int error;
|
|
size_t i;
|
|
|
|
(void)zyd_write32(sc, ZYD_CR18, 2);
|
|
|
|
/* init RF-dependent PHY registers */
|
|
for (i = 0; i < __arraycount(phyini); i++) {
|
|
error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
/* init AL2210 radio */
|
|
for (i = 0; i < __arraycount(rfini); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
|
|
return error;
|
|
}
|
|
(void)zyd_write16(sc, ZYD_CR47, 0x1e);
|
|
(void)zyd_read32(sc, ZYD_CR_RADIO_PD, &tmp);
|
|
(void)zyd_write32(sc, ZYD_CR_RADIO_PD, tmp & ~1);
|
|
(void)zyd_write32(sc, ZYD_CR_RADIO_PD, tmp | 1);
|
|
(void)zyd_write32(sc, ZYD_CR_RFCFG, 0x05);
|
|
(void)zyd_write32(sc, ZYD_CR_RFCFG, 0x00);
|
|
(void)zyd_write16(sc, ZYD_CR47, 0x1e);
|
|
(void)zyd_write32(sc, ZYD_CR18, 3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_al2210_switch_radio(struct zyd_rf *rf, int on)
|
|
{
|
|
/* vendor driver does nothing for this RF chip */
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_al2210_set_channel(struct zyd_rf *rf, uint8_t chan)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const uint32_t rfprog[] = ZYD_AL2210_CHANTABLE;
|
|
uint32_t tmp;
|
|
|
|
(void)zyd_write32(sc, ZYD_CR18, 2);
|
|
(void)zyd_write16(sc, ZYD_CR47, 0x1e);
|
|
(void)zyd_read32(sc, ZYD_CR_RADIO_PD, &tmp);
|
|
(void)zyd_write32(sc, ZYD_CR_RADIO_PD, tmp & ~1);
|
|
(void)zyd_write32(sc, ZYD_CR_RADIO_PD, tmp | 1);
|
|
(void)zyd_write32(sc, ZYD_CR_RFCFG, 0x05);
|
|
|
|
(void)zyd_write32(sc, ZYD_CR_RFCFG, 0x00);
|
|
(void)zyd_write16(sc, ZYD_CR47, 0x1e);
|
|
|
|
/* actually set the channel */
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1]);
|
|
|
|
(void)zyd_write32(sc, ZYD_CR18, 3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* GCT RF methods.
|
|
*/
|
|
Static int
|
|
zyd_gct_init(struct zyd_rf *rf)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct zyd_phy_pair phyini[] = ZYD_GCT_PHY;
|
|
static const uint32_t rfini[] = ZYD_GCT_RF;
|
|
int error;
|
|
size_t i;
|
|
|
|
/* init RF-dependent PHY registers */
|
|
for (i = 0; i < __arraycount(phyini); i++) {
|
|
error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
/* init cgt radio */
|
|
for (i = 0; i < __arraycount(rfini); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
|
|
return error;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_gct_switch_radio(struct zyd_rf *rf, int on)
|
|
{
|
|
/* vendor driver does nothing for this RF chip */
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_gct_set_channel(struct zyd_rf *rf, uint8_t chan)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const uint32_t rfprog[] = ZYD_GCT_CHANTABLE;
|
|
|
|
(void)zyd_rfwrite(sc, 0x1c0000);
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1]);
|
|
(void)zyd_rfwrite(sc, 0x1c0008);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Maxim RF methods.
|
|
*/
|
|
Static int
|
|
zyd_maxim_init(struct zyd_rf *rf)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct zyd_phy_pair phyini[] = ZYD_MAXIM_PHY;
|
|
static const uint32_t rfini[] = ZYD_MAXIM_RF;
|
|
uint16_t tmp;
|
|
int error;
|
|
size_t i;
|
|
|
|
/* init RF-dependent PHY registers */
|
|
for (i = 0; i < __arraycount(phyini); i++) {
|
|
error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
(void)zyd_read16(sc, ZYD_CR203, &tmp);
|
|
(void)zyd_write16(sc, ZYD_CR203, tmp & ~(1 << 4));
|
|
|
|
/* init maxim radio */
|
|
for (i = 0; i < __arraycount(rfini); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
|
|
return error;
|
|
}
|
|
(void)zyd_read16(sc, ZYD_CR203, &tmp);
|
|
(void)zyd_write16(sc, ZYD_CR203, tmp | (1 << 4));
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_maxim_switch_radio(struct zyd_rf *rf, int on)
|
|
{
|
|
/* vendor driver does nothing for this RF chip */
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_maxim_set_channel(struct zyd_rf *rf, uint8_t chan)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct zyd_phy_pair phyini[] = ZYD_MAXIM_PHY;
|
|
static const uint32_t rfini[] = ZYD_MAXIM_RF;
|
|
static const struct {
|
|
uint32_t r1, r2;
|
|
} rfprog[] = ZYD_MAXIM_CHANTABLE;
|
|
uint16_t tmp;
|
|
int error;
|
|
size_t i;
|
|
|
|
/*
|
|
* Do the same as we do when initializing it, except for the channel
|
|
* values coming from the two channel tables.
|
|
*/
|
|
|
|
/* init RF-dependent PHY registers */
|
|
for (i = 0; i < __arraycount(phyini); i++) {
|
|
error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
(void)zyd_read16(sc, ZYD_CR203, &tmp);
|
|
(void)zyd_write16(sc, ZYD_CR203, tmp & ~(1 << 4));
|
|
|
|
/* first two values taken from the chantables */
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1].r1);
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1].r2);
|
|
|
|
/* init maxim radio - skipping the two first values */
|
|
for (i = 2; i < __arraycount(rfini); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
|
|
return error;
|
|
}
|
|
(void)zyd_read16(sc, ZYD_CR203, &tmp);
|
|
(void)zyd_write16(sc, ZYD_CR203, tmp | (1 << 4));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Maxim2 RF methods.
|
|
*/
|
|
Static int
|
|
zyd_maxim2_init(struct zyd_rf *rf)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct zyd_phy_pair phyini[] = ZYD_MAXIM2_PHY;
|
|
static const uint32_t rfini[] = ZYD_MAXIM2_RF;
|
|
uint16_t tmp;
|
|
int error;
|
|
size_t i;
|
|
|
|
/* init RF-dependent PHY registers */
|
|
for (i = 0; i < __arraycount(phyini); i++) {
|
|
error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
(void)zyd_read16(sc, ZYD_CR203, &tmp);
|
|
(void)zyd_write16(sc, ZYD_CR203, tmp & ~(1 << 4));
|
|
|
|
/* init maxim2 radio */
|
|
for (i = 0; i < __arraycount(rfini); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
|
|
return error;
|
|
}
|
|
(void)zyd_read16(sc, ZYD_CR203, &tmp);
|
|
(void)zyd_write16(sc, ZYD_CR203, tmp | (1 << 4));
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_maxim2_switch_radio(struct zyd_rf *rf, int on)
|
|
{
|
|
/* vendor driver does nothing for this RF chip */
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_maxim2_set_channel(struct zyd_rf *rf, uint8_t chan)
|
|
{
|
|
struct zyd_softc *sc = rf->rf_sc;
|
|
static const struct zyd_phy_pair phyini[] = ZYD_MAXIM2_PHY;
|
|
static const uint32_t rfini[] = ZYD_MAXIM2_RF;
|
|
static const struct {
|
|
uint32_t r1, r2;
|
|
} rfprog[] = ZYD_MAXIM2_CHANTABLE;
|
|
uint16_t tmp;
|
|
int error;
|
|
size_t i;
|
|
|
|
/*
|
|
* Do the same as we do when initializing it, except for the channel
|
|
* values coming from the two channel tables.
|
|
*/
|
|
|
|
/* init RF-dependent PHY registers */
|
|
for (i = 0; i < __arraycount(phyini); i++) {
|
|
error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
(void)zyd_read16(sc, ZYD_CR203, &tmp);
|
|
(void)zyd_write16(sc, ZYD_CR203, tmp & ~(1 << 4));
|
|
|
|
/* first two values taken from the chantables */
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1].r1);
|
|
(void)zyd_rfwrite(sc, rfprog[chan - 1].r2);
|
|
|
|
/* init maxim2 radio - skipping the two first values */
|
|
for (i = 2; i < __arraycount(rfini); i++) {
|
|
if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
|
|
return error;
|
|
}
|
|
(void)zyd_read16(sc, ZYD_CR203, &tmp);
|
|
(void)zyd_write16(sc, ZYD_CR203, tmp | (1 << 4));
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_rf_attach(struct zyd_softc *sc, uint8_t type)
|
|
{
|
|
struct zyd_rf *rf = &sc->sc_rf;
|
|
|
|
rf->rf_sc = sc;
|
|
|
|
switch (type) {
|
|
case ZYD_RF_RFMD:
|
|
rf->init = zyd_rfmd_init;
|
|
rf->switch_radio = zyd_rfmd_switch_radio;
|
|
rf->set_channel = zyd_rfmd_set_channel;
|
|
rf->width = 24; /* 24-bit RF values */
|
|
break;
|
|
case ZYD_RF_AL2230:
|
|
case ZYD_RF_AL2230S:
|
|
if (sc->mac_rev == ZYD_ZD1211B)
|
|
rf->init = zyd_al2230_init_b;
|
|
else
|
|
rf->init = zyd_al2230_init;
|
|
rf->switch_radio = zyd_al2230_switch_radio;
|
|
rf->set_channel = zyd_al2230_set_channel;
|
|
rf->width = 24; /* 24-bit RF values */
|
|
break;
|
|
case ZYD_RF_AL7230B:
|
|
rf->init = zyd_al7230B_init;
|
|
rf->switch_radio = zyd_al7230B_switch_radio;
|
|
rf->set_channel = zyd_al7230B_set_channel;
|
|
rf->width = 24; /* 24-bit RF values */
|
|
break;
|
|
case ZYD_RF_AL2210:
|
|
rf->init = zyd_al2210_init;
|
|
rf->switch_radio = zyd_al2210_switch_radio;
|
|
rf->set_channel = zyd_al2210_set_channel;
|
|
rf->width = 24; /* 24-bit RF values */
|
|
break;
|
|
case ZYD_RF_GCT:
|
|
rf->init = zyd_gct_init;
|
|
rf->switch_radio = zyd_gct_switch_radio;
|
|
rf->set_channel = zyd_gct_set_channel;
|
|
rf->width = 21; /* 21-bit RF values */
|
|
break;
|
|
case ZYD_RF_MAXIM_NEW:
|
|
rf->init = zyd_maxim_init;
|
|
rf->switch_radio = zyd_maxim_switch_radio;
|
|
rf->set_channel = zyd_maxim_set_channel;
|
|
rf->width = 18; /* 18-bit RF values */
|
|
break;
|
|
case ZYD_RF_MAXIM_NEW2:
|
|
rf->init = zyd_maxim2_init;
|
|
rf->switch_radio = zyd_maxim2_switch_radio;
|
|
rf->set_channel = zyd_maxim2_set_channel;
|
|
rf->width = 18; /* 18-bit RF values */
|
|
break;
|
|
default:
|
|
printf("%s: sorry, radio \"%s\" is not supported yet\n",
|
|
device_xname(sc->sc_dev), zyd_rf_name(type));
|
|
return EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
Static const char *
|
|
zyd_rf_name(uint8_t type)
|
|
{
|
|
static const char * const zyd_rfs[] = {
|
|
"unknown", "unknown", "UW2451", "UCHIP", "AL2230",
|
|
"AL7230B", "THETA", "AL2210", "MAXIM_NEW", "GCT",
|
|
"AL2230S", "RALINK", "INTERSIL", "RFMD", "MAXIM_NEW2",
|
|
"PHILIPS"
|
|
};
|
|
|
|
return zyd_rfs[(type > 15) ? 0 : type];
|
|
}
|
|
|
|
Static int
|
|
zyd_hw_init(struct zyd_softc *sc)
|
|
{
|
|
struct zyd_rf *rf = &sc->sc_rf;
|
|
const struct zyd_phy_pair *phyp;
|
|
int error;
|
|
|
|
/* specify that the plug and play is finished */
|
|
(void)zyd_write32(sc, ZYD_MAC_AFTER_PNP, 1);
|
|
|
|
(void)zyd_read16(sc, ZYD_FIRMWARE_BASE_ADDR, &sc->fwbase);
|
|
DPRINTF(("firmware base address=0x%04x\n", sc->fwbase));
|
|
|
|
/* retrieve firmware revision number */
|
|
(void)zyd_read16(sc, sc->fwbase + ZYD_FW_FIRMWARE_REV, &sc->fw_rev);
|
|
|
|
(void)zyd_write32(sc, ZYD_CR_GPI_EN, 0);
|
|
(void)zyd_write32(sc, ZYD_MAC_CONT_WIN_LIMIT, 0x7f043f);
|
|
|
|
/* disable interrupts */
|
|
(void)zyd_write32(sc, ZYD_CR_INTERRUPT, 0);
|
|
|
|
/* PHY init */
|
|
zyd_lock_phy(sc);
|
|
phyp = (sc->mac_rev == ZYD_ZD1211B) ? zyd_def_phyB : zyd_def_phy;
|
|
for (; phyp->reg != 0; phyp++) {
|
|
if ((error = zyd_write16(sc, phyp->reg, phyp->val)) != 0)
|
|
goto fail;
|
|
}
|
|
zyd_unlock_phy(sc);
|
|
|
|
/* HMAC init */
|
|
zyd_write32(sc, ZYD_MAC_ACK_EXT, 0x00000020);
|
|
zyd_write32(sc, ZYD_CR_ADDA_MBIAS_WT, 0x30000808);
|
|
|
|
if (sc->mac_rev == ZYD_ZD1211) {
|
|
zyd_write32(sc, ZYD_MAC_RETRY, 0x00000002);
|
|
} else {
|
|
zyd_write32(sc, ZYD_MAC_RETRY, 0x02020202);
|
|
zyd_write32(sc, ZYD_MACB_TXPWR_CTL4, 0x007f003f);
|
|
zyd_write32(sc, ZYD_MACB_TXPWR_CTL3, 0x007f003f);
|
|
zyd_write32(sc, ZYD_MACB_TXPWR_CTL2, 0x003f001f);
|
|
zyd_write32(sc, ZYD_MACB_TXPWR_CTL1, 0x001f000f);
|
|
zyd_write32(sc, ZYD_MACB_AIFS_CTL1, 0x00280028);
|
|
zyd_write32(sc, ZYD_MACB_AIFS_CTL2, 0x008C003C);
|
|
zyd_write32(sc, ZYD_MACB_TXOP, 0x01800824);
|
|
}
|
|
|
|
zyd_write32(sc, ZYD_MAC_SNIFFER, 0x00000000);
|
|
zyd_write32(sc, ZYD_MAC_RXFILTER, 0x00000000);
|
|
zyd_write32(sc, ZYD_MAC_GHTBL, 0x00000000);
|
|
zyd_write32(sc, ZYD_MAC_GHTBH, 0x80000000);
|
|
zyd_write32(sc, ZYD_MAC_MISC, 0x000000a4);
|
|
zyd_write32(sc, ZYD_CR_ADDA_PWR_DWN, 0x0000007f);
|
|
zyd_write32(sc, ZYD_MAC_BCNCFG, 0x00f00401);
|
|
zyd_write32(sc, ZYD_MAC_PHY_DELAY2, 0x00000000);
|
|
zyd_write32(sc, ZYD_MAC_ACK_EXT, 0x00000080);
|
|
zyd_write32(sc, ZYD_CR_ADDA_PWR_DWN, 0x00000000);
|
|
zyd_write32(sc, ZYD_MAC_SIFS_ACK_TIME, 0x00000100);
|
|
zyd_write32(sc, ZYD_MAC_DIFS_EIFS_SIFS, 0x0547c032);
|
|
zyd_write32(sc, ZYD_CR_RX_PE_DELAY, 0x00000070);
|
|
zyd_write32(sc, ZYD_CR_PS_CTRL, 0x10000000);
|
|
zyd_write32(sc, ZYD_MAC_RTSCTSRATE, 0x02030203);
|
|
zyd_write32(sc, ZYD_MAC_RX_THRESHOLD, 0x000c0640);
|
|
zyd_write32(sc, ZYD_MAC_BACKOFF_PROTECT, 0x00000114);
|
|
|
|
/* RF chip init */
|
|
zyd_lock_phy(sc);
|
|
error = (*rf->init)(rf);
|
|
zyd_unlock_phy(sc);
|
|
if (error != 0) {
|
|
printf("%s: radio initialization failed\n",
|
|
device_xname(sc->sc_dev));
|
|
goto fail;
|
|
}
|
|
|
|
/* init beacon interval to 100ms */
|
|
if ((error = zyd_set_beacon_interval(sc, 100)) != 0)
|
|
goto fail;
|
|
|
|
fail: return error;
|
|
}
|
|
|
|
Static int
|
|
zyd_read_eeprom(struct zyd_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint32_t tmp;
|
|
uint16_t val;
|
|
int i;
|
|
|
|
/* read MAC address */
|
|
(void)zyd_read32(sc, ZYD_EEPROM_MAC_ADDR_P1, &tmp);
|
|
ic->ic_myaddr[0] = tmp & 0xff;
|
|
ic->ic_myaddr[1] = tmp >> 8;
|
|
ic->ic_myaddr[2] = tmp >> 16;
|
|
ic->ic_myaddr[3] = tmp >> 24;
|
|
(void)zyd_read32(sc, ZYD_EEPROM_MAC_ADDR_P2, &tmp);
|
|
ic->ic_myaddr[4] = tmp & 0xff;
|
|
ic->ic_myaddr[5] = tmp >> 8;
|
|
|
|
(void)zyd_read32(sc, ZYD_EEPROM_POD, &tmp);
|
|
sc->rf_rev = tmp & 0x0f;
|
|
sc->pa_rev = (tmp >> 16) & 0x0f;
|
|
|
|
/* read regulatory domain (currently unused) */
|
|
(void)zyd_read32(sc, ZYD_EEPROM_SUBID, &tmp);
|
|
sc->regdomain = tmp >> 16;
|
|
DPRINTF(("regulatory domain %x\n", sc->regdomain));
|
|
|
|
/* read Tx power calibration tables */
|
|
for (i = 0; i < 7; i++) {
|
|
(void)zyd_read16(sc, ZYD_EEPROM_PWR_CAL + i, &val);
|
|
sc->pwr_cal[i * 2] = val >> 8;
|
|
sc->pwr_cal[i * 2 + 1] = val & 0xff;
|
|
|
|
(void)zyd_read16(sc, ZYD_EEPROM_PWR_INT + i, &val);
|
|
sc->pwr_int[i * 2] = val >> 8;
|
|
sc->pwr_int[i * 2 + 1] = val & 0xff;
|
|
|
|
(void)zyd_read16(sc, ZYD_EEPROM_36M_CAL + i, &val);
|
|
sc->ofdm36_cal[i * 2] = val >> 8;
|
|
sc->ofdm36_cal[i * 2 + 1] = val & 0xff;
|
|
|
|
(void)zyd_read16(sc, ZYD_EEPROM_48M_CAL + i, &val);
|
|
sc->ofdm48_cal[i * 2] = val >> 8;
|
|
sc->ofdm48_cal[i * 2 + 1] = val & 0xff;
|
|
|
|
(void)zyd_read16(sc, ZYD_EEPROM_54M_CAL + i, &val);
|
|
sc->ofdm54_cal[i * 2] = val >> 8;
|
|
sc->ofdm54_cal[i * 2 + 1] = val & 0xff;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_set_macaddr(struct zyd_softc *sc, const uint8_t *addr)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
tmp = addr[3] << 24 | addr[2] << 16 | addr[1] << 8 | addr[0];
|
|
(void)zyd_write32(sc, ZYD_MAC_MACADRL, tmp);
|
|
|
|
tmp = addr[5] << 8 | addr[4];
|
|
(void)zyd_write32(sc, ZYD_MAC_MACADRH, tmp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_set_bssid(struct zyd_softc *sc, const uint8_t *addr)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
tmp = addr[3] << 24 | addr[2] << 16 | addr[1] << 8 | addr[0];
|
|
(void)zyd_write32(sc, ZYD_MAC_BSSADRL, tmp);
|
|
|
|
tmp = addr[5] << 8 | addr[4];
|
|
(void)zyd_write32(sc, ZYD_MAC_BSSADRH, tmp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
zyd_switch_radio(struct zyd_softc *sc, int on)
|
|
{
|
|
struct zyd_rf *rf = &sc->sc_rf;
|
|
int error;
|
|
|
|
zyd_lock_phy(sc);
|
|
error = (*rf->switch_radio)(rf, on);
|
|
zyd_unlock_phy(sc);
|
|
|
|
return error;
|
|
}
|
|
|
|
Static void
|
|
zyd_set_led(struct zyd_softc *sc, int which, int on)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
(void)zyd_read32(sc, ZYD_MAC_TX_PE_CONTROL, &tmp);
|
|
tmp &= ~which;
|
|
if (on)
|
|
tmp |= which;
|
|
(void)zyd_write32(sc, ZYD_MAC_TX_PE_CONTROL, tmp);
|
|
}
|
|
|
|
Static int
|
|
zyd_set_rxfilter(struct zyd_softc *sc)
|
|
{
|
|
uint32_t rxfilter;
|
|
|
|
switch (sc->sc_ic.ic_opmode) {
|
|
case IEEE80211_M_STA:
|
|
rxfilter = ZYD_FILTER_BSS;
|
|
break;
|
|
case IEEE80211_M_IBSS:
|
|
case IEEE80211_M_HOSTAP:
|
|
rxfilter = ZYD_FILTER_HOSTAP;
|
|
break;
|
|
case IEEE80211_M_MONITOR:
|
|
rxfilter = ZYD_FILTER_MONITOR;
|
|
break;
|
|
default:
|
|
/* should not get there */
|
|
return EINVAL;
|
|
}
|
|
return zyd_write32(sc, ZYD_MAC_RXFILTER, rxfilter);
|
|
}
|
|
|
|
Static void
|
|
zyd_set_chan(struct zyd_softc *sc, struct ieee80211_channel *c)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct zyd_rf *rf = &sc->sc_rf;
|
|
u_int chan;
|
|
|
|
chan = ieee80211_chan2ieee(ic, c);
|
|
if (chan == 0 || chan == IEEE80211_CHAN_ANY)
|
|
return;
|
|
|
|
zyd_lock_phy(sc);
|
|
|
|
(*rf->set_channel)(rf, chan);
|
|
|
|
/* update Tx power */
|
|
(void)zyd_write32(sc, ZYD_CR31, sc->pwr_int[chan - 1]);
|
|
(void)zyd_write32(sc, ZYD_CR68, sc->pwr_cal[chan - 1]);
|
|
|
|
if (sc->mac_rev == ZYD_ZD1211B) {
|
|
(void)zyd_write32(sc, ZYD_CR67, sc->ofdm36_cal[chan - 1]);
|
|
(void)zyd_write32(sc, ZYD_CR66, sc->ofdm48_cal[chan - 1]);
|
|
(void)zyd_write32(sc, ZYD_CR65, sc->ofdm54_cal[chan - 1]);
|
|
|
|
(void)zyd_write32(sc, ZYD_CR69, 0x28);
|
|
(void)zyd_write32(sc, ZYD_CR69, 0x2a);
|
|
}
|
|
|
|
zyd_unlock_phy(sc);
|
|
}
|
|
|
|
Static int
|
|
zyd_set_beacon_interval(struct zyd_softc *sc, int bintval)
|
|
{
|
|
/* XXX this is probably broken.. */
|
|
(void)zyd_write32(sc, ZYD_CR_ATIM_WND_PERIOD, bintval - 2);
|
|
(void)zyd_write32(sc, ZYD_CR_PRE_TBTT, bintval - 1);
|
|
(void)zyd_write32(sc, ZYD_CR_BCN_INTERVAL, bintval);
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static uint8_t
|
|
zyd_plcp_signal(int rate)
|
|
{
|
|
switch (rate) {
|
|
/* CCK rates (returned values are device-dependent) */
|
|
case 2: return 0x0;
|
|
case 4: return 0x1;
|
|
case 11: return 0x2;
|
|
case 22: return 0x3;
|
|
|
|
/* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */
|
|
case 12: return 0xb;
|
|
case 18: return 0xf;
|
|
case 24: return 0xa;
|
|
case 36: return 0xe;
|
|
case 48: return 0x9;
|
|
case 72: return 0xd;
|
|
case 96: return 0x8;
|
|
case 108: return 0xc;
|
|
|
|
/* unsupported rates (should not get there) */
|
|
default: return 0xff;
|
|
}
|
|
}
|
|
|
|
Static void
|
|
zyd_intr(struct usbd_xfer *xfer, void * priv, usbd_status status)
|
|
{
|
|
struct zyd_softc *sc = (struct zyd_softc *)priv;
|
|
struct zyd_cmd *cmd;
|
|
uint32_t datalen;
|
|
|
|
if (status != USBD_NORMAL_COMPLETION) {
|
|
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
|
|
return;
|
|
|
|
if (status == USBD_STALLED) {
|
|
usbd_clear_endpoint_stall_async(
|
|
sc->zyd_ep[ZYD_ENDPT_IIN]);
|
|
}
|
|
return;
|
|
}
|
|
|
|
cmd = (struct zyd_cmd *)sc->ibuf;
|
|
|
|
if (le16toh(cmd->code) == ZYD_NOTIF_RETRYSTATUS) {
|
|
struct zyd_notif_retry *retry =
|
|
(struct zyd_notif_retry *)cmd->data;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifnet *ifp = &sc->sc_if;
|
|
struct ieee80211_node *ni;
|
|
|
|
DPRINTF(("retry intr: rate=0x%x addr=%s count=%d (0x%x)\n",
|
|
le16toh(retry->rate), ether_sprintf(retry->macaddr),
|
|
le16toh(retry->count) & 0xff, le16toh(retry->count)));
|
|
|
|
/*
|
|
* Find the node to which the packet was sent and update its
|
|
* retry statistics. In BSS mode, this node is the AP we're
|
|
* associated to so no lookup is actually needed.
|
|
*/
|
|
if (ic->ic_opmode != IEEE80211_M_STA) {
|
|
ni = ieee80211_find_node(&ic->ic_scan, retry->macaddr);
|
|
if (ni == NULL)
|
|
return; /* just ignore */
|
|
} else
|
|
ni = ic->ic_bss;
|
|
|
|
((struct zyd_node *)ni)->amn.amn_retrycnt++;
|
|
|
|
if (le16toh(retry->count) & 0x100)
|
|
ifp->if_oerrors++; /* too many retries */
|
|
|
|
} else if (le16toh(cmd->code) == ZYD_NOTIF_IORD) {
|
|
struct rq *rqp;
|
|
|
|
if (le16toh(*(uint16_t *)cmd->data) == ZYD_CR_INTERRUPT)
|
|
return; /* HMAC interrupt */
|
|
|
|
usbd_get_xfer_status(xfer, NULL, NULL, &datalen, NULL);
|
|
datalen -= sizeof(cmd->code);
|
|
datalen -= 2; /* XXX: padding? */
|
|
|
|
SIMPLEQ_FOREACH(rqp, &sc->sc_rqh, rq) {
|
|
int i;
|
|
|
|
if (sizeof(struct zyd_pair) * rqp->len != datalen)
|
|
continue;
|
|
for (i = 0; i < rqp->len; i++) {
|
|
if (*(((const uint16_t *)rqp->idata) + i) !=
|
|
(((struct zyd_pair *)cmd->data) + i)->reg)
|
|
break;
|
|
}
|
|
if (i != rqp->len)
|
|
continue;
|
|
|
|
/* copy answer into caller-supplied buffer */
|
|
memcpy(rqp->odata, cmd->data,
|
|
sizeof(struct zyd_pair) * rqp->len);
|
|
wakeup(rqp->odata); /* wakeup caller */
|
|
|
|
return;
|
|
}
|
|
return; /* unexpected IORD notification */
|
|
} else {
|
|
printf("%s: unknown notification %x\n", device_xname(sc->sc_dev),
|
|
le16toh(cmd->code));
|
|
}
|
|
}
|
|
|
|
Static void
|
|
zyd_rx_data(struct zyd_softc *sc, const uint8_t *buf, uint16_t len)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifnet *ifp = &sc->sc_if;
|
|
struct ieee80211_node *ni;
|
|
struct ieee80211_frame *wh;
|
|
const struct zyd_plcphdr *plcp;
|
|
const struct zyd_rx_stat *stat;
|
|
struct mbuf *m;
|
|
int rlen, s;
|
|
|
|
if (len < ZYD_MIN_FRAGSZ) {
|
|
printf("%s: frame too short (length=%d)\n",
|
|
device_xname(sc->sc_dev), len);
|
|
ifp->if_ierrors++;
|
|
return;
|
|
}
|
|
|
|
plcp = (const struct zyd_plcphdr *)buf;
|
|
stat = (const struct zyd_rx_stat *)
|
|
(buf + len - sizeof(struct zyd_rx_stat));
|
|
|
|
if (stat->flags & ZYD_RX_ERROR) {
|
|
DPRINTF(("%s: RX status indicated error (%x)\n",
|
|
device_xname(sc->sc_dev), stat->flags));
|
|
ifp->if_ierrors++;
|
|
return;
|
|
}
|
|
|
|
/* compute actual frame length */
|
|
rlen = len - sizeof(struct zyd_plcphdr) -
|
|
sizeof(struct zyd_rx_stat) - IEEE80211_CRC_LEN;
|
|
|
|
/* allocate a mbuf to store the frame */
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == NULL) {
|
|
printf("%s: could not allocate rx mbuf\n",
|
|
device_xname(sc->sc_dev));
|
|
ifp->if_ierrors++;
|
|
return;
|
|
}
|
|
if (rlen > MHLEN) {
|
|
MCLGET(m, M_DONTWAIT);
|
|
if (!(m->m_flags & M_EXT)) {
|
|
printf("%s: could not allocate rx mbuf cluster\n",
|
|
device_xname(sc->sc_dev));
|
|
m_freem(m);
|
|
ifp->if_ierrors++;
|
|
return;
|
|
}
|
|
}
|
|
m_set_rcvif(m, ifp);
|
|
m->m_pkthdr.len = m->m_len = rlen;
|
|
memcpy(mtod(m, uint8_t *), (const uint8_t *)(plcp + 1), rlen);
|
|
|
|
s = splnet();
|
|
|
|
if (sc->sc_drvbpf != NULL) {
|
|
struct zyd_rx_radiotap_header *tap = &sc->sc_rxtap;
|
|
static const uint8_t rates[] = {
|
|
/* reverse function of zyd_plcp_signal() */
|
|
2, 4, 11, 22, 0, 0, 0, 0,
|
|
96, 48, 24, 12, 108, 72, 36, 18
|
|
};
|
|
|
|
tap->wr_flags = IEEE80211_RADIOTAP_F_FCS;
|
|
tap->wr_chan_freq = htole16(ic->ic_curchan->ic_freq);
|
|
tap->wr_chan_flags = htole16(ic->ic_curchan->ic_flags);
|
|
tap->wr_rssi = stat->rssi;
|
|
tap->wr_rate = rates[plcp->signal & 0xf];
|
|
|
|
bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_rxtap_len, m);
|
|
}
|
|
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)wh);
|
|
ieee80211_input(ic, m, ni, stat->rssi, 0);
|
|
|
|
/* node is no longer needed */
|
|
ieee80211_free_node(ni);
|
|
|
|
splx(s);
|
|
}
|
|
|
|
Static void
|
|
zyd_rxeof(struct usbd_xfer *xfer, void * priv, usbd_status status)
|
|
{
|
|
struct zyd_rx_data *data = priv;
|
|
struct zyd_softc *sc = data->sc;
|
|
struct ifnet *ifp = &sc->sc_if;
|
|
const struct zyd_rx_desc *desc;
|
|
int len;
|
|
|
|
if (status != USBD_NORMAL_COMPLETION) {
|
|
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
|
|
return;
|
|
|
|
if (status == USBD_STALLED)
|
|
usbd_clear_endpoint_stall(sc->zyd_ep[ZYD_ENDPT_BIN]);
|
|
|
|
goto skip;
|
|
}
|
|
usbd_get_xfer_status(xfer, NULL, NULL, &len, NULL);
|
|
|
|
if (len < ZYD_MIN_RXBUFSZ) {
|
|
printf("%s: xfer too short (length=%d)\n",
|
|
device_xname(sc->sc_dev), len);
|
|
ifp->if_ierrors++;
|
|
goto skip;
|
|
}
|
|
|
|
desc = (const struct zyd_rx_desc *)
|
|
(data->buf + len - sizeof(struct zyd_rx_desc));
|
|
|
|
if (UGETW(desc->tag) == ZYD_TAG_MULTIFRAME) {
|
|
const uint8_t *p = data->buf, *end = p + len;
|
|
int i;
|
|
|
|
DPRINTFN(3, ("received multi-frame transfer\n"));
|
|
|
|
for (i = 0; i < ZYD_MAX_RXFRAMECNT; i++) {
|
|
const uint16_t len16 = UGETW(desc->len[i]);
|
|
|
|
if (len16 == 0 || p + len16 > end)
|
|
break;
|
|
|
|
zyd_rx_data(sc, p, len16);
|
|
/* next frame is aligned on a 32-bit boundary */
|
|
p += (len16 + 3) & ~3;
|
|
}
|
|
} else {
|
|
DPRINTFN(3, ("received single-frame transfer\n"));
|
|
|
|
zyd_rx_data(sc, data->buf, len);
|
|
}
|
|
|
|
skip: /* setup a new transfer */
|
|
|
|
usbd_setup_xfer(xfer, data, NULL, ZYX_MAX_RXBUFSZ, USBD_SHORT_XFER_OK,
|
|
USBD_NO_TIMEOUT, zyd_rxeof);
|
|
(void)usbd_transfer(xfer);
|
|
}
|
|
|
|
Static int
|
|
zyd_tx_mgt(struct zyd_softc *sc, struct mbuf *m0, struct ieee80211_node *ni)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifnet *ifp = &sc->sc_if;
|
|
struct zyd_tx_desc *desc;
|
|
struct zyd_tx_data *data;
|
|
struct ieee80211_frame *wh;
|
|
struct ieee80211_key *k;
|
|
int xferlen, totlen, rate;
|
|
uint16_t pktlen;
|
|
usbd_status error;
|
|
|
|
data = &sc->tx_data[0];
|
|
desc = (struct zyd_tx_desc *)data->buf;
|
|
|
|
rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan) ? 12 : 2;
|
|
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
|
|
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
|
|
k = ieee80211_crypto_encap(ic, ni, m0);
|
|
if (k == NULL) {
|
|
m_freem(m0);
|
|
return ENOBUFS;
|
|
}
|
|
}
|
|
|
|
data->ni = ni;
|
|
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
|
|
xferlen = sizeof(struct zyd_tx_desc) + m0->m_pkthdr.len;
|
|
totlen = m0->m_pkthdr.len + IEEE80211_CRC_LEN;
|
|
|
|
/* fill Tx descriptor */
|
|
desc->len = htole16(totlen);
|
|
|
|
desc->flags = ZYD_TX_FLAG_BACKOFF;
|
|
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
|
|
/* multicast frames are not sent at OFDM rates in 802.11b/g */
|
|
if (totlen > ic->ic_rtsthreshold) {
|
|
desc->flags |= ZYD_TX_FLAG_RTS;
|
|
} else if (ZYD_RATE_IS_OFDM(rate) &&
|
|
(ic->ic_flags & IEEE80211_F_USEPROT)) {
|
|
if (ic->ic_protmode == IEEE80211_PROT_CTSONLY)
|
|
desc->flags |= ZYD_TX_FLAG_CTS_TO_SELF;
|
|
else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS)
|
|
desc->flags |= ZYD_TX_FLAG_RTS;
|
|
}
|
|
} else
|
|
desc->flags |= ZYD_TX_FLAG_MULTICAST;
|
|
|
|
if ((wh->i_fc[0] &
|
|
(IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
|
|
(IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_PS_POLL))
|
|
desc->flags |= ZYD_TX_FLAG_TYPE(ZYD_TX_TYPE_PS_POLL);
|
|
|
|
desc->phy = zyd_plcp_signal(rate);
|
|
if (ZYD_RATE_IS_OFDM(rate)) {
|
|
desc->phy |= ZYD_TX_PHY_OFDM;
|
|
if (ic->ic_curmode == IEEE80211_MODE_11A)
|
|
desc->phy |= ZYD_TX_PHY_5GHZ;
|
|
} else if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
|
|
desc->phy |= ZYD_TX_PHY_SHPREAMBLE;
|
|
|
|
/* actual transmit length (XXX why +10?) */
|
|
pktlen = sizeof(struct zyd_tx_desc) + 10;
|
|
if (sc->mac_rev == ZYD_ZD1211)
|
|
pktlen += totlen;
|
|
desc->pktlen = htole16(pktlen);
|
|
|
|
desc->plcp_length = (16 * totlen + rate - 1) / rate;
|
|
desc->plcp_service = 0;
|
|
if (rate == 22) {
|
|
const int remainder = (16 * totlen) % 22;
|
|
if (remainder != 0 && remainder < 7)
|
|
desc->plcp_service |= ZYD_PLCP_LENGEXT;
|
|
}
|
|
|
|
if (sc->sc_drvbpf != NULL) {
|
|
struct zyd_tx_radiotap_header *tap = &sc->sc_txtap;
|
|
|
|
tap->wt_flags = 0;
|
|
tap->wt_rate = rate;
|
|
tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
|
|
tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
|
|
|
|
bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0);
|
|
}
|
|
|
|
m_copydata(m0, 0, m0->m_pkthdr.len,
|
|
data->buf + sizeof(struct zyd_tx_desc));
|
|
|
|
DPRINTFN(10, ("%s: sending mgt frame len=%zu rate=%u xferlen=%u\n",
|
|
device_xname(sc->sc_dev), (size_t)m0->m_pkthdr.len, rate, xferlen));
|
|
|
|
m_freem(m0); /* mbuf no longer needed */
|
|
|
|
usbd_setup_xfer(data->xfer, data, data->buf, xferlen,
|
|
USBD_FORCE_SHORT_XFER, ZYD_TX_TIMEOUT, zyd_txeof);
|
|
error = usbd_transfer(data->xfer);
|
|
if (error != USBD_IN_PROGRESS && error != 0) {
|
|
ifp->if_oerrors++;
|
|
return EIO;
|
|
}
|
|
sc->tx_queued++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static void
|
|
zyd_txeof(struct usbd_xfer *xfer, void * priv, usbd_status status)
|
|
{
|
|
struct zyd_tx_data *data = priv;
|
|
struct zyd_softc *sc = data->sc;
|
|
struct ifnet *ifp = &sc->sc_if;
|
|
int s;
|
|
|
|
if (status != USBD_NORMAL_COMPLETION) {
|
|
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
|
|
return;
|
|
|
|
printf("%s: could not transmit buffer: %s\n",
|
|
device_xname(sc->sc_dev), usbd_errstr(status));
|
|
|
|
if (status == USBD_STALLED) {
|
|
usbd_clear_endpoint_stall_async(
|
|
sc->zyd_ep[ZYD_ENDPT_BOUT]);
|
|
}
|
|
ifp->if_oerrors++;
|
|
return;
|
|
}
|
|
|
|
s = splnet();
|
|
|
|
/* update rate control statistics */
|
|
((struct zyd_node *)data->ni)->amn.amn_txcnt++;
|
|
|
|
ieee80211_free_node(data->ni);
|
|
data->ni = NULL;
|
|
|
|
sc->tx_queued--;
|
|
ifp->if_opackets++;
|
|
|
|
sc->tx_timer = 0;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
zyd_start(ifp);
|
|
|
|
splx(s);
|
|
}
|
|
|
|
Static int
|
|
zyd_tx_data(struct zyd_softc *sc, struct mbuf *m0, struct ieee80211_node *ni)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifnet *ifp = &sc->sc_if;
|
|
struct zyd_tx_desc *desc;
|
|
struct zyd_tx_data *data;
|
|
struct ieee80211_frame *wh;
|
|
struct ieee80211_key *k;
|
|
int xferlen, totlen, rate;
|
|
uint16_t pktlen;
|
|
usbd_status error;
|
|
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
|
|
if (ic->ic_fixed_rate != IEEE80211_FIXED_RATE_NONE)
|
|
rate = ic->ic_bss->ni_rates.rs_rates[ic->ic_fixed_rate];
|
|
else
|
|
rate = ni->ni_rates.rs_rates[ni->ni_txrate];
|
|
rate &= IEEE80211_RATE_VAL;
|
|
|
|
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
|
|
k = ieee80211_crypto_encap(ic, ni, m0);
|
|
if (k == NULL) {
|
|
m_freem(m0);
|
|
return ENOBUFS;
|
|
}
|
|
|
|
/* packet header may have moved, reset our local pointer */
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
}
|
|
|
|
data = &sc->tx_data[0];
|
|
desc = (struct zyd_tx_desc *)data->buf;
|
|
|
|
data->ni = ni;
|
|
|
|
xferlen = sizeof(struct zyd_tx_desc) + m0->m_pkthdr.len;
|
|
totlen = m0->m_pkthdr.len + IEEE80211_CRC_LEN;
|
|
|
|
/* fill Tx descriptor */
|
|
desc->len = htole16(totlen);
|
|
|
|
desc->flags = ZYD_TX_FLAG_BACKOFF;
|
|
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
|
|
/* multicast frames are not sent at OFDM rates in 802.11b/g */
|
|
if (totlen > ic->ic_rtsthreshold) {
|
|
desc->flags |= ZYD_TX_FLAG_RTS;
|
|
} else if (ZYD_RATE_IS_OFDM(rate) &&
|
|
(ic->ic_flags & IEEE80211_F_USEPROT)) {
|
|
if (ic->ic_protmode == IEEE80211_PROT_CTSONLY)
|
|
desc->flags |= ZYD_TX_FLAG_CTS_TO_SELF;
|
|
else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS)
|
|
desc->flags |= ZYD_TX_FLAG_RTS;
|
|
}
|
|
} else
|
|
desc->flags |= ZYD_TX_FLAG_MULTICAST;
|
|
|
|
if ((wh->i_fc[0] &
|
|
(IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
|
|
(IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_PS_POLL))
|
|
desc->flags |= ZYD_TX_FLAG_TYPE(ZYD_TX_TYPE_PS_POLL);
|
|
|
|
desc->phy = zyd_plcp_signal(rate);
|
|
if (ZYD_RATE_IS_OFDM(rate)) {
|
|
desc->phy |= ZYD_TX_PHY_OFDM;
|
|
if (ic->ic_curmode == IEEE80211_MODE_11A)
|
|
desc->phy |= ZYD_TX_PHY_5GHZ;
|
|
} else if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
|
|
desc->phy |= ZYD_TX_PHY_SHPREAMBLE;
|
|
|
|
/* actual transmit length (XXX why +10?) */
|
|
pktlen = sizeof(struct zyd_tx_desc) + 10;
|
|
if (sc->mac_rev == ZYD_ZD1211)
|
|
pktlen += totlen;
|
|
desc->pktlen = htole16(pktlen);
|
|
|
|
desc->plcp_length = (16 * totlen + rate - 1) / rate;
|
|
desc->plcp_service = 0;
|
|
if (rate == 22) {
|
|
const int remainder = (16 * totlen) % 22;
|
|
if (remainder != 0 && remainder < 7)
|
|
desc->plcp_service |= ZYD_PLCP_LENGEXT;
|
|
}
|
|
|
|
if (sc->sc_drvbpf != NULL) {
|
|
struct zyd_tx_radiotap_header *tap = &sc->sc_txtap;
|
|
|
|
tap->wt_flags = 0;
|
|
tap->wt_rate = rate;
|
|
tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
|
|
tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
|
|
|
|
bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0);
|
|
}
|
|
|
|
m_copydata(m0, 0, m0->m_pkthdr.len,
|
|
data->buf + sizeof(struct zyd_tx_desc));
|
|
|
|
DPRINTFN(10, ("%s: sending data frame len=%zu rate=%u xferlen=%u\n",
|
|
device_xname(sc->sc_dev), (size_t)m0->m_pkthdr.len, rate, xferlen));
|
|
|
|
m_freem(m0); /* mbuf no longer needed */
|
|
|
|
usbd_setup_xfer(data->xfer, data, data->buf, xferlen,
|
|
USBD_FORCE_SHORT_XFER, ZYD_TX_TIMEOUT, zyd_txeof);
|
|
error = usbd_transfer(data->xfer);
|
|
if (error != USBD_IN_PROGRESS && error != 0) {
|
|
ifp->if_oerrors++;
|
|
return EIO;
|
|
}
|
|
sc->tx_queued++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static void
|
|
zyd_start(struct ifnet *ifp)
|
|
{
|
|
struct zyd_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ether_header *eh;
|
|
struct ieee80211_node *ni;
|
|
struct mbuf *m0;
|
|
|
|
for (;;) {
|
|
IF_POLL(&ic->ic_mgtq, m0);
|
|
if (m0 != NULL) {
|
|
if (sc->tx_queued >= ZYD_TX_LIST_CNT) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
break;
|
|
}
|
|
IF_DEQUEUE(&ic->ic_mgtq, m0);
|
|
|
|
ni = M_GETCTX(m0, struct ieee80211_node *);
|
|
M_CLEARCTX(m0);
|
|
bpf_mtap3(ic->ic_rawbpf, m0);
|
|
if (zyd_tx_mgt(sc, m0, ni) != 0)
|
|
break;
|
|
} else {
|
|
if (ic->ic_state != IEEE80211_S_RUN)
|
|
break;
|
|
IFQ_POLL(&ifp->if_snd, m0);
|
|
if (m0 == NULL)
|
|
break;
|
|
if (sc->tx_queued >= ZYD_TX_LIST_CNT) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
break;
|
|
}
|
|
IFQ_DEQUEUE(&ifp->if_snd, m0);
|
|
|
|
if (m0->m_len < sizeof(struct ether_header) &&
|
|
!(m0 = m_pullup(m0, sizeof(struct ether_header))))
|
|
continue;
|
|
|
|
eh = mtod(m0, struct ether_header *);
|
|
ni = ieee80211_find_txnode(ic, eh->ether_dhost);
|
|
if (ni == NULL) {
|
|
m_freem(m0);
|
|
continue;
|
|
}
|
|
bpf_mtap(ifp, m0);
|
|
if ((m0 = ieee80211_encap(ic, m0, ni)) == NULL) {
|
|
ieee80211_free_node(ni);
|
|
ifp->if_oerrors++;
|
|
continue;
|
|
}
|
|
bpf_mtap3(ic->ic_rawbpf, m0);
|
|
if (zyd_tx_data(sc, m0, ni) != 0) {
|
|
ieee80211_free_node(ni);
|
|
ifp->if_oerrors++;
|
|
break;
|
|
}
|
|
}
|
|
|
|
sc->tx_timer = 5;
|
|
ifp->if_timer = 1;
|
|
}
|
|
}
|
|
|
|
Static void
|
|
zyd_watchdog(struct ifnet *ifp)
|
|
{
|
|
struct zyd_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
ifp->if_timer = 0;
|
|
|
|
if (sc->tx_timer > 0) {
|
|
if (--sc->tx_timer == 0) {
|
|
printf("%s: device timeout\n", device_xname(sc->sc_dev));
|
|
/* zyd_init(ifp); XXX needs a process context ? */
|
|
ifp->if_oerrors++;
|
|
return;
|
|
}
|
|
ifp->if_timer = 1;
|
|
}
|
|
|
|
ieee80211_watchdog(ic);
|
|
}
|
|
|
|
Static int
|
|
zyd_ioctl(struct ifnet *ifp, u_long cmd, void *data)
|
|
{
|
|
struct zyd_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
int s, error = 0;
|
|
|
|
s = splnet();
|
|
|
|
switch (cmd) {
|
|
case SIOCSIFFLAGS:
|
|
if ((error = ifioctl_common(ifp, cmd, data)) != 0)
|
|
break;
|
|
/* XXX re-use ether_ioctl() */
|
|
switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) {
|
|
case IFF_UP:
|
|
zyd_init(ifp);
|
|
break;
|
|
case IFF_RUNNING:
|
|
zyd_stop(ifp, 1);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
error = ieee80211_ioctl(ic, cmd, data);
|
|
}
|
|
|
|
if (error == ENETRESET) {
|
|
if ((ifp->if_flags & (IFF_RUNNING | IFF_UP)) ==
|
|
(IFF_RUNNING | IFF_UP))
|
|
zyd_init(ifp);
|
|
error = 0;
|
|
}
|
|
|
|
splx(s);
|
|
|
|
return error;
|
|
}
|
|
|
|
Static int
|
|
zyd_init(struct ifnet *ifp)
|
|
{
|
|
struct zyd_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
int i, error;
|
|
|
|
zyd_stop(ifp, 0);
|
|
|
|
IEEE80211_ADDR_COPY(ic->ic_myaddr, CLLADDR(ifp->if_sadl));
|
|
DPRINTF(("setting MAC address to %s\n", ether_sprintf(ic->ic_myaddr)));
|
|
error = zyd_set_macaddr(sc, ic->ic_myaddr);
|
|
if (error != 0)
|
|
return error;
|
|
|
|
/* we'll do software WEP decryption for now */
|
|
DPRINTF(("setting encryption type\n"));
|
|
error = zyd_write32(sc, ZYD_MAC_ENCRYPTION_TYPE, ZYD_ENC_SNIFFER);
|
|
if (error != 0)
|
|
return error;
|
|
|
|
/* promiscuous mode */
|
|
(void)zyd_write32(sc, ZYD_MAC_SNIFFER,
|
|
(ic->ic_opmode == IEEE80211_M_MONITOR) ? 1 : 0);
|
|
|
|
(void)zyd_set_rxfilter(sc);
|
|
|
|
/* switch radio transmitter ON */
|
|
(void)zyd_switch_radio(sc, 1);
|
|
|
|
/* set basic rates */
|
|
if (ic->ic_curmode == IEEE80211_MODE_11B)
|
|
(void)zyd_write32(sc, ZYD_MAC_BAS_RATE, 0x0003);
|
|
else if (ic->ic_curmode == IEEE80211_MODE_11A)
|
|
(void)zyd_write32(sc, ZYD_MAC_BAS_RATE, 0x1500);
|
|
else /* assumes 802.11b/g */
|
|
(void)zyd_write32(sc, ZYD_MAC_BAS_RATE, 0x000f);
|
|
|
|
/* set mandatory rates */
|
|
if (ic->ic_curmode == IEEE80211_MODE_11B)
|
|
(void)zyd_write32(sc, ZYD_MAC_MAN_RATE, 0x000f);
|
|
else if (ic->ic_curmode == IEEE80211_MODE_11A)
|
|
(void)zyd_write32(sc, ZYD_MAC_MAN_RATE, 0x1500);
|
|
else /* assumes 802.11b/g */
|
|
(void)zyd_write32(sc, ZYD_MAC_MAN_RATE, 0x150f);
|
|
|
|
/* set default BSS channel */
|
|
ic->ic_bss->ni_chan = ic->ic_ibss_chan;
|
|
zyd_set_chan(sc, ic->ic_bss->ni_chan);
|
|
|
|
/* enable interrupts */
|
|
(void)zyd_write32(sc, ZYD_CR_INTERRUPT, ZYD_HWINT_MASK);
|
|
|
|
/*
|
|
* Allocate Tx and Rx xfer queues.
|
|
*/
|
|
if ((error = zyd_alloc_tx_list(sc)) != 0) {
|
|
printf("%s: could not allocate Tx list\n",
|
|
device_xname(sc->sc_dev));
|
|
goto fail;
|
|
}
|
|
if ((error = zyd_alloc_rx_list(sc)) != 0) {
|
|
printf("%s: could not allocate Rx list\n",
|
|
device_xname(sc->sc_dev));
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Start up the receive pipe.
|
|
*/
|
|
for (i = 0; i < ZYD_RX_LIST_CNT; i++) {
|
|
struct zyd_rx_data *data = &sc->rx_data[i];
|
|
|
|
usbd_setup_xfer(data->xfer, data, NULL, ZYX_MAX_RXBUFSZ,
|
|
USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, zyd_rxeof);
|
|
error = usbd_transfer(data->xfer);
|
|
if (error != USBD_IN_PROGRESS && error != 0) {
|
|
printf("%s: could not queue Rx transfer\n",
|
|
device_xname(sc->sc_dev));
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_MONITOR)
|
|
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
|
|
else
|
|
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
|
|
|
|
return 0;
|
|
|
|
fail: zyd_stop(ifp, 1);
|
|
return error;
|
|
}
|
|
|
|
Static void
|
|
zyd_stop(struct ifnet *ifp, int disable)
|
|
{
|
|
struct zyd_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
ieee80211_new_state(ic, IEEE80211_S_INIT, -1); /* free all nodes */
|
|
|
|
sc->tx_timer = 0;
|
|
ifp->if_timer = 0;
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
|
|
/* switch radio transmitter OFF */
|
|
(void)zyd_switch_radio(sc, 0);
|
|
|
|
/* disable Rx */
|
|
(void)zyd_write32(sc, ZYD_MAC_RXFILTER, 0);
|
|
|
|
/* disable interrupts */
|
|
(void)zyd_write32(sc, ZYD_CR_INTERRUPT, 0);
|
|
|
|
usbd_abort_pipe(sc->zyd_ep[ZYD_ENDPT_BIN]);
|
|
usbd_abort_pipe(sc->zyd_ep[ZYD_ENDPT_BOUT]);
|
|
|
|
zyd_free_rx_list(sc);
|
|
zyd_free_tx_list(sc);
|
|
}
|
|
|
|
Static int
|
|
zyd_loadfirmware(struct zyd_softc *sc, u_char *fw, size_t size)
|
|
{
|
|
usb_device_request_t req;
|
|
uint16_t addr;
|
|
uint8_t stat;
|
|
|
|
DPRINTF(("firmware size=%zu\n", size));
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = ZYD_DOWNLOADREQ;
|
|
USETW(req.wIndex, 0);
|
|
|
|
addr = ZYD_FIRMWARE_START_ADDR;
|
|
while (size > 0) {
|
|
#if 0
|
|
const int mlen = min(size, 4096);
|
|
#else
|
|
/*
|
|
* XXXX: When the transfer size is 4096 bytes, it is not
|
|
* likely to be able to transfer it.
|
|
* The cause is port or machine or chip?
|
|
*/
|
|
const int mlen = min(size, 64);
|
|
#endif
|
|
|
|
DPRINTF(("loading firmware block: len=%d, addr=0x%x\n", mlen,
|
|
addr));
|
|
|
|
USETW(req.wValue, addr);
|
|
USETW(req.wLength, mlen);
|
|
if (usbd_do_request(sc->sc_udev, &req, fw) != 0)
|
|
return EIO;
|
|
|
|
addr += mlen / 2;
|
|
fw += mlen;
|
|
size -= mlen;
|
|
}
|
|
|
|
/* check whether the upload succeeded */
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = ZYD_DOWNLOADSTS;
|
|
USETW(req.wValue, 0);
|
|
USETW(req.wIndex, 0);
|
|
USETW(req.wLength, sizeof(stat));
|
|
if (usbd_do_request(sc->sc_udev, &req, &stat) != 0)
|
|
return EIO;
|
|
|
|
return (stat & 0x80) ? EIO : 0;
|
|
}
|
|
|
|
Static void
|
|
zyd_iter_func(void *arg, struct ieee80211_node *ni)
|
|
{
|
|
struct zyd_softc *sc = arg;
|
|
struct zyd_node *zn = (struct zyd_node *)ni;
|
|
|
|
ieee80211_amrr_choose(&sc->amrr, ni, &zn->amn);
|
|
}
|
|
|
|
Static void
|
|
zyd_amrr_timeout(void *arg)
|
|
{
|
|
struct zyd_softc *sc = arg;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
int s;
|
|
|
|
s = splnet();
|
|
if (ic->ic_opmode == IEEE80211_M_STA)
|
|
zyd_iter_func(sc, ic->ic_bss);
|
|
else
|
|
ieee80211_iterate_nodes(&ic->ic_sta, zyd_iter_func, sc);
|
|
splx(s);
|
|
|
|
callout_reset(&sc->sc_amrr_ch, hz, zyd_amrr_timeout, sc);
|
|
}
|
|
|
|
Static void
|
|
zyd_newassoc(struct ieee80211_node *ni, int isnew)
|
|
{
|
|
struct zyd_softc *sc = ni->ni_ic->ic_ifp->if_softc;
|
|
int i;
|
|
|
|
ieee80211_amrr_node_init(&sc->amrr, &((struct zyd_node *)ni)->amn);
|
|
|
|
/* set rate to some reasonable initial value */
|
|
for (i = ni->ni_rates.rs_nrates - 1;
|
|
i > 0 && (ni->ni_rates.rs_rates[i] & IEEE80211_RATE_VAL) > 72;
|
|
i--);
|
|
ni->ni_txrate = i;
|
|
}
|
|
|
|
int
|
|
zyd_activate(device_t self, enum devact act)
|
|
{
|
|
struct zyd_softc *sc = device_private(self);
|
|
|
|
switch (act) {
|
|
case DVACT_DEACTIVATE:
|
|
if_deactivate(&sc->sc_if);
|
|
return 0;
|
|
default:
|
|
return EOPNOTSUPP;
|
|
}
|
|
}
|