Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/pci/cs4281.c

1285 lines
34 KiB
C
Raw Blame History

/* $NetBSD: cs4281.c,v 1.52 2016/07/07 06:55:41 msaitoh Exp $ */
/*
* Copyright (c) 2000 Tatoku Ogaito. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Tatoku Ogaito
* for the NetBSD Project.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Cirrus Logic CS4281 driver.
* Data sheets can be found
* http://www.cirrus.com/ftp/pub/4281.pdf
* ftp://ftp.alsa-project.org/pub/manuals/cirrus/cs4281tm.pdf
*
* TODO:
* 1: midi and FM support
* 2: ...
*
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: cs4281.c,v 1.52 2016/07/07 06:55:41 msaitoh Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/fcntl.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/cs4281reg.h>
#include <dev/pci/cs428xreg.h>
#include <sys/audioio.h>
#include <dev/audio_if.h>
#include <dev/midi_if.h>
#include <dev/mulaw.h>
#include <dev/auconv.h>
#include <dev/ic/ac97reg.h>
#include <dev/ic/ac97var.h>
#include <dev/pci/cs428x.h>
#include <sys/bus.h>
#if defined(ENABLE_SECONDARY_CODEC)
#define MAX_CHANNELS (4)
#define MAX_FIFO_SIZE 32 /* 128/4channels */
#else
#define MAX_CHANNELS (2)
#define MAX_FIFO_SIZE 64 /* 128/2channels */
#endif
/* IF functions for audio driver */
static int cs4281_match(device_t, cfdata_t, void *);
static void cs4281_attach(device_t, device_t, void *);
static int cs4281_intr(void *);
static int cs4281_query_encoding(void *, struct audio_encoding *);
static int cs4281_set_params(void *, int, int, audio_params_t *,
audio_params_t *, stream_filter_list_t *,
stream_filter_list_t *);
static int cs4281_halt_output(void *);
static int cs4281_halt_input(void *);
static int cs4281_getdev(void *, struct audio_device *);
static int cs4281_trigger_output(void *, void *, void *, int,
void (*)(void *), void *,
const audio_params_t *);
static int cs4281_trigger_input(void *, void *, void *, int,
void (*)(void *), void *,
const audio_params_t *);
static int cs4281_reset_codec(void *);
/* Internal functions */
static uint8_t cs4281_sr2regval(int);
static void cs4281_set_dac_rate(struct cs428x_softc *, int);
static void cs4281_set_adc_rate(struct cs428x_softc *, int);
static int cs4281_init(struct cs428x_softc *, int);
/* Power Management */
static bool cs4281_suspend(device_t, const pmf_qual_t *);
static bool cs4281_resume(device_t, const pmf_qual_t *);
static const struct audio_hw_if cs4281_hw_if = {
NULL, /* open */
NULL, /* close */
NULL,
cs4281_query_encoding,
cs4281_set_params,
cs428x_round_blocksize,
NULL,
NULL,
NULL,
NULL,
NULL,
cs4281_halt_output,
cs4281_halt_input,
NULL,
cs4281_getdev,
NULL,
cs428x_mixer_set_port,
cs428x_mixer_get_port,
cs428x_query_devinfo,
cs428x_malloc,
cs428x_free,
cs428x_round_buffersize,
cs428x_mappage,
cs428x_get_props,
cs4281_trigger_output,
cs4281_trigger_input,
NULL,
cs428x_get_locks,
};
#if NMIDI > 0 && 0
/* Midi Interface */
static void cs4281_midi_close(void*);
static void cs4281_midi_getinfo(void *, struct midi_info *);
static int cs4281_midi_open(void *, int, void (*)(void *, int),
void (*)(void *), void *);
static int cs4281_midi_output(void *, int);
static const struct midi_hw_if cs4281_midi_hw_if = {
cs4281_midi_open,
cs4281_midi_close,
cs4281_midi_output,
cs4281_midi_getinfo,
0,
cs428x_get_locks,
};
#endif
CFATTACH_DECL_NEW(clct, sizeof(struct cs428x_softc),
cs4281_match, cs4281_attach, NULL, NULL);
static struct audio_device cs4281_device = {
"CS4281",
"",
"cs4281"
};
static int
cs4281_match(device_t parent, cfdata_t match, void *aux)
{
struct pci_attach_args *pa;
pa = (struct pci_attach_args *)aux;
if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_CIRRUS)
return 0;
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_CIRRUS_CS4281)
return 1;
return 0;
}
static void
cs4281_attach(device_t parent, device_t self, void *aux)
{
struct cs428x_softc *sc;
struct pci_attach_args *pa;
pci_chipset_tag_t pc;
char const *intrstr;
pcireg_t reg;
int error;
char intrbuf[PCI_INTRSTR_LEN];
sc = device_private(self);
sc->sc_dev = self;
pa = (struct pci_attach_args *)aux;
pc = pa->pa_pc;
pci_aprint_devinfo(pa, "Audio controller");
sc->sc_pc = pa->pa_pc;
sc->sc_pt = pa->pa_tag;
/* Map I/O register */
if (pci_mapreg_map(pa, PCI_BA0,
PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
&sc->ba0t, &sc->ba0h, NULL, NULL)) {
aprint_error_dev(sc->sc_dev, "can't map BA0 space\n");
return;
}
if (pci_mapreg_map(pa, PCI_BA1,
PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
&sc->ba1t, &sc->ba1h, NULL, NULL)) {
aprint_error_dev(sc->sc_dev, "can't map BA1 space\n");
return;
}
sc->sc_dmatag = pa->pa_dmat;
/* power up chip */
if ((error = pci_activate(pa->pa_pc, pa->pa_tag, self,
pci_activate_null)) && error != EOPNOTSUPP) {
aprint_error_dev(sc->sc_dev, "cannot activate %d\n", error);
return;
}
/* Enable the device (set bus master flag) */
reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
reg | PCI_COMMAND_MASTER_ENABLE);
#if 0
/* LATENCY_TIMER setting */
temp1 = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG);
if (PCI_LATTIMER(temp1) < 32) {
temp1 &= 0xffff00ff;
temp1 |= 0x00002000;
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG, temp1);
}
#endif
/* Map and establish the interrupt. */
if (pci_intr_map(pa, &sc->intrh)) {
aprint_error_dev(sc->sc_dev, "couldn't map interrupt\n");
return;
}
intrstr = pci_intr_string(pc, sc->intrh, intrbuf, sizeof(intrbuf));
mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_NONE);
mutex_init(&sc->sc_intr_lock, MUTEX_DEFAULT, IPL_AUDIO);
sc->sc_ih = pci_intr_establish(sc->sc_pc, sc->intrh, IPL_AUDIO,
cs4281_intr, sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(sc->sc_dev, "couldn't establish interrupt");
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
mutex_destroy(&sc->sc_lock);
mutex_destroy(&sc->sc_intr_lock);
return;
}
aprint_normal_dev(sc->sc_dev, "interrupting at %s\n", intrstr);
/*
* Sound System start-up
*/
if (cs4281_init(sc, 1) != 0) {
mutex_destroy(&sc->sc_lock);
mutex_destroy(&sc->sc_intr_lock);
return;
}
sc->type = TYPE_CS4281;
sc->halt_input = cs4281_halt_input;
sc->halt_output = cs4281_halt_output;
sc->dma_size = CS4281_BUFFER_SIZE / MAX_CHANNELS;
sc->dma_align = 0x10;
sc->hw_blocksize = sc->dma_size / 2;
/* AC 97 attachment */
sc->host_if.arg = sc;
sc->host_if.attach = cs428x_attach_codec;
sc->host_if.read = cs428x_read_codec;
sc->host_if.write = cs428x_write_codec;
sc->host_if.reset = cs4281_reset_codec;
if (ac97_attach(&sc->host_if, self, &sc->sc_lock) != 0) {
aprint_error_dev(sc->sc_dev, "ac97_attach failed\n");
mutex_destroy(&sc->sc_lock);
mutex_destroy(&sc->sc_intr_lock);
return;
}
audio_attach_mi(&cs4281_hw_if, sc, sc->sc_dev);
#if NMIDI > 0 && 0
midi_attach_mi(&cs4281_midi_hw_if, sc, sc->sc_dev);
#endif
if (!pmf_device_register(self, cs4281_suspend, cs4281_resume))
aprint_error_dev(self, "couldn't establish power handler\n");
}
static int
cs4281_intr(void *p)
{
struct cs428x_softc *sc;
uint32_t intr, hdsr0, hdsr1;
char *empty_dma;
int handled;
sc = p;
handled = 0;
hdsr0 = 0;
hdsr1 = 0;
mutex_spin_enter(&sc->sc_intr_lock);
/* grab interrupt register */
intr = BA0READ4(sc, CS4281_HISR);
DPRINTF(("cs4281_intr:"));
/* not for me */
if ((intr & HISR_INTENA) == 0) {
/* clear the interrupt register */
BA0WRITE4(sc, CS4281_HICR, HICR_CHGM | HICR_IEV);
mutex_spin_exit(&sc->sc_intr_lock);
return 0;
}
if (intr & HISR_DMA0)
hdsr0 = BA0READ4(sc, CS4281_HDSR0); /* clear intr condition */
if (intr & HISR_DMA1)
hdsr1 = BA0READ4(sc, CS4281_HDSR1); /* clear intr condition */
/* clear the interrupt register */
BA0WRITE4(sc, CS4281_HICR, HICR_CHGM | HICR_IEV);
#ifdef CS4280_DEBUG
DPRINTF(("intr = 0x%08x, hdsr0 = 0x%08x hdsr1 = 0x%08x\n",
intr, hdsr0, hdsr1));
#else
__USE(hdsr0);
__USE(hdsr1);
#endif
/* Playback Interrupt */
if (intr & HISR_DMA0) {
handled = 1;
if (sc->sc_prun) {
DPRINTF((" PB DMA 0x%x(%d)",
(int)BA0READ4(sc, CS4281_DCA0),
(int)BA0READ4(sc, CS4281_DCC0)));
if ((sc->sc_pi%sc->sc_pcount) == 0)
sc->sc_pintr(sc->sc_parg);
/* copy buffer */
++sc->sc_pi;
empty_dma = sc->sc_pdma->addr;
if (sc->sc_pi&1)
empty_dma += sc->hw_blocksize;
memcpy(empty_dma, sc->sc_pn, sc->hw_blocksize);
sc->sc_pn += sc->hw_blocksize;
if (sc->sc_pn >= sc->sc_pe)
sc->sc_pn = sc->sc_ps;
} else {
aprint_error_dev(sc->sc_dev, "unexpected play intr\n");
}
}
if (intr & HISR_DMA1) {
handled = 1;
if (sc->sc_rrun) {
/* copy from DMA */
DPRINTF((" CP DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA1),
(int)BA0READ4(sc, CS4281_DCC1)));
++sc->sc_ri;
empty_dma = sc->sc_rdma->addr;
if ((sc->sc_ri & 1) == 0)
empty_dma += sc->hw_blocksize;
memcpy(sc->sc_rn, empty_dma, sc->hw_blocksize);
sc->sc_rn += sc->hw_blocksize;
if (sc->sc_rn >= sc->sc_re)
sc->sc_rn = sc->sc_rs;
if ((sc->sc_ri % sc->sc_rcount) == 0)
sc->sc_rintr(sc->sc_rarg);
} else {
aprint_error_dev(sc->sc_dev,
"unexpected record intr\n");
}
}
DPRINTF(("\n"));
mutex_spin_exit(&sc->sc_intr_lock);
return handled;
}
static int
cs4281_query_encoding(void *addr, struct audio_encoding *fp)
{
switch (fp->index) {
case 0:
strcpy(fp->name, AudioEulinear);
fp->encoding = AUDIO_ENCODING_ULINEAR;
fp->precision = 8;
fp->flags = 0;
break;
case 1:
strcpy(fp->name, AudioEmulaw);
fp->encoding = AUDIO_ENCODING_ULAW;
fp->precision = 8;
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
break;
case 2:
strcpy(fp->name, AudioEalaw);
fp->encoding = AUDIO_ENCODING_ALAW;
fp->precision = 8;
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
break;
case 3:
strcpy(fp->name, AudioEslinear);
fp->encoding = AUDIO_ENCODING_SLINEAR;
fp->precision = 8;
fp->flags = 0;
break;
case 4:
strcpy(fp->name, AudioEslinear_le);
fp->encoding = AUDIO_ENCODING_SLINEAR_LE;
fp->precision = 16;
fp->flags = 0;
break;
case 5:
strcpy(fp->name, AudioEulinear_le);
fp->encoding = AUDIO_ENCODING_ULINEAR_LE;
fp->precision = 16;
fp->flags = 0;
break;
case 6:
strcpy(fp->name, AudioEslinear_be);
fp->encoding = AUDIO_ENCODING_SLINEAR_BE;
fp->precision = 16;
fp->flags = 0;
break;
case 7:
strcpy(fp->name, AudioEulinear_be);
fp->encoding = AUDIO_ENCODING_ULINEAR_BE;
fp->precision = 16;
fp->flags = 0;
break;
default:
return EINVAL;
}
return 0;
}
static int
cs4281_set_params(void *addr, int setmode, int usemode,
audio_params_t *play, audio_params_t *rec, stream_filter_list_t *pfil,
stream_filter_list_t *rfil)
{
audio_params_t hw;
struct cs428x_softc *sc;
audio_params_t *p;
stream_filter_list_t *fil;
int mode;
sc = addr;
for (mode = AUMODE_RECORD; mode != -1;
mode = mode == AUMODE_RECORD ? AUMODE_PLAY : -1) {
if ((setmode & mode) == 0)
continue;
p = mode == AUMODE_PLAY ? play : rec;
if (p == play) {
DPRINTFN(5,
("play: sample=%u precision=%u channels=%u\n",
p->sample_rate, p->precision, p->channels));
if (p->sample_rate < 6023 || p->sample_rate > 48000 ||
(p->precision != 8 && p->precision != 16) ||
(p->channels != 1 && p->channels != 2)) {
return EINVAL;
}
} else {
DPRINTFN(5,
("rec: sample=%u precision=%u channels=%u\n",
p->sample_rate, p->precision, p->channels));
if (p->sample_rate < 6023 || p->sample_rate > 48000 ||
(p->precision != 8 && p->precision != 16) ||
(p->channels != 1 && p->channels != 2)) {
return EINVAL;
}
}
hw = *p;
fil = mode == AUMODE_PLAY ? pfil : rfil;
switch (p->encoding) {
case AUDIO_ENCODING_SLINEAR_BE:
break;
case AUDIO_ENCODING_SLINEAR_LE:
break;
case AUDIO_ENCODING_ULINEAR_BE:
break;
case AUDIO_ENCODING_ULINEAR_LE:
break;
case AUDIO_ENCODING_ULAW:
hw.encoding = AUDIO_ENCODING_SLINEAR_LE;
fil->append(fil, mode == AUMODE_PLAY ? mulaw_to_linear8
: linear8_to_mulaw, &hw);
break;
case AUDIO_ENCODING_ALAW:
hw.encoding = AUDIO_ENCODING_SLINEAR_LE;
fil->append(fil, mode == AUMODE_PLAY ? alaw_to_linear8
: linear8_to_alaw, &hw);
break;
default:
return EINVAL;
}
}
/* set sample rate */
cs4281_set_dac_rate(sc, play->sample_rate);
cs4281_set_adc_rate(sc, rec->sample_rate);
return 0;
}
static int
cs4281_halt_output(void *addr)
{
struct cs428x_softc *sc;
sc = addr;
BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK);
sc->sc_prun = 0;
return 0;
}
static int
cs4281_halt_input(void *addr)
{
struct cs428x_softc *sc;
sc = addr;
BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK);
sc->sc_rrun = 0;
return 0;
}
static int
cs4281_getdev(void *addr, struct audio_device *retp)
{
*retp = cs4281_device;
return 0;
}
static int
cs4281_trigger_output(void *addr, void *start, void *end, int blksize,
void (*intr)(void *), void *arg,
const audio_params_t *param)
{
struct cs428x_softc *sc;
uint32_t fmt;
struct cs428x_dma *p;
int dma_count;
sc = addr;
fmt = 0;
#ifdef DIAGNOSTIC
if (sc->sc_prun)
printf("cs4281_trigger_output: already running\n");
#endif
sc->sc_prun = 1;
DPRINTF(("cs4281_trigger_output: sc=%p start=%p end=%p "
"blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg));
sc->sc_pintr = intr;
sc->sc_parg = arg;
/* stop playback DMA */
BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK);
DPRINTF(("param: precision=%d channels=%d encoding=%d\n",
param->precision, param->channels, param->encoding));
for (p = sc->sc_dmas; p != NULL && BUFADDR(p) != start; p = p->next)
continue;
if (p == NULL) {
printf("cs4281_trigger_output: bad addr %p\n", start);
return EINVAL;
}
sc->sc_pcount = blksize / sc->hw_blocksize;
sc->sc_ps = (char *)start;
sc->sc_pe = (char *)end;
sc->sc_pdma = p;
sc->sc_pbuf = KERNADDR(p);
sc->sc_pi = 0;
sc->sc_pn = sc->sc_ps;
if (blksize >= sc->dma_size) {
sc->sc_pn = sc->sc_ps + sc->dma_size;
memcpy(sc->sc_pbuf, start, sc->dma_size);
++sc->sc_pi;
} else {
sc->sc_pn = sc->sc_ps + sc->hw_blocksize;
memcpy(sc->sc_pbuf, start, sc->hw_blocksize);
}
dma_count = sc->dma_size;
if (param->precision != 8)
dma_count /= 2; /* 16 bit */
if (param->channels > 1)
dma_count /= 2; /* Stereo */
DPRINTF(("cs4281_trigger_output: DMAADDR(p)=0x%x count=%d\n",
(int)DMAADDR(p), dma_count));
BA0WRITE4(sc, CS4281_DBA0, DMAADDR(p));
BA0WRITE4(sc, CS4281_DBC0, dma_count-1);
/* set playback format */
fmt = BA0READ4(sc, CS4281_DMR0) & ~DMRn_FMTMSK;
if (param->precision == 8)
fmt |= DMRn_SIZE8;
if (param->channels == 1)
fmt |= DMRn_MONO;
if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
param->encoding == AUDIO_ENCODING_SLINEAR_BE)
fmt |= DMRn_BEND;
if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
param->encoding == AUDIO_ENCODING_ULINEAR_LE)
fmt |= DMRn_USIGN;
BA0WRITE4(sc, CS4281_DMR0, fmt);
/* set sample rate */
sc->sc_prate = param->sample_rate;
cs4281_set_dac_rate(sc, param->sample_rate);
/* start DMA */
BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) & ~DCRn_MSK);
/* Enable interrupts */
BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM);
DPRINTF(("HICR =0x%08x(expected 0x00000001)\n", BA0READ4(sc, CS4281_HICR)));
DPRINTF(("HIMR =0x%08x(expected 0x00f0fc3f)\n", BA0READ4(sc, CS4281_HIMR)));
DPRINTF(("DMR0 =0x%08x(expected 0x2???0018)\n", BA0READ4(sc, CS4281_DMR0)));
DPRINTF(("DCR0 =0x%08x(expected 0x00030000)\n", BA0READ4(sc, CS4281_DCR0)));
DPRINTF(("FCR0 =0x%08x(expected 0x81000f00)\n", BA0READ4(sc, CS4281_FCR0)));
DPRINTF(("DACSR=0x%08x(expected 1 for 44kHz 5 for 8kHz)\n",
BA0READ4(sc, CS4281_DACSR)));
DPRINTF(("SRCSA=0x%08x(expected 0x0b0a0100)\n", BA0READ4(sc, CS4281_SRCSA)));
DPRINTF(("SSPM&SSPM_PSRCEN =0x%08x(expected 0x00000010)\n",
BA0READ4(sc, CS4281_SSPM) & SSPM_PSRCEN));
return 0;
}
static int
cs4281_trigger_input(void *addr, void *start, void *end, int blksize,
void (*intr)(void *), void *arg,
const audio_params_t *param)
{
struct cs428x_softc *sc;
struct cs428x_dma *p;
uint32_t fmt;
int dma_count;
sc = addr;
fmt = 0;
#ifdef DIAGNOSTIC
if (sc->sc_rrun)
printf("cs4281_trigger_input: already running\n");
#endif
sc->sc_rrun = 1;
DPRINTF(("cs4281_trigger_input: sc=%p start=%p end=%p "
"blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg));
sc->sc_rintr = intr;
sc->sc_rarg = arg;
/* stop recording DMA */
BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK);
for (p = sc->sc_dmas; p && BUFADDR(p) != start; p = p->next)
continue;
if (!p) {
printf("cs4281_trigger_input: bad addr %p\n", start);
return EINVAL;
}
sc->sc_rcount = blksize / sc->hw_blocksize;
sc->sc_rs = (char *)start;
sc->sc_re = (char *)end;
sc->sc_rdma = p;
sc->sc_rbuf = KERNADDR(p);
sc->sc_ri = 0;
sc->sc_rn = sc->sc_rs;
dma_count = sc->dma_size;
if (param->precision != 8)
dma_count /= 2;
if (param->channels > 1)
dma_count /= 2;
DPRINTF(("cs4281_trigger_input: DMAADDR(p)=0x%x count=%d\n",
(int)DMAADDR(p), dma_count));
BA0WRITE4(sc, CS4281_DBA1, DMAADDR(p));
BA0WRITE4(sc, CS4281_DBC1, dma_count-1);
/* set recording format */
fmt = BA0READ4(sc, CS4281_DMR1) & ~DMRn_FMTMSK;
if (param->precision == 8)
fmt |= DMRn_SIZE8;
if (param->channels == 1)
fmt |= DMRn_MONO;
if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
param->encoding == AUDIO_ENCODING_SLINEAR_BE)
fmt |= DMRn_BEND;
if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
param->encoding == AUDIO_ENCODING_ULINEAR_LE)
fmt |= DMRn_USIGN;
BA0WRITE4(sc, CS4281_DMR1, fmt);
/* set sample rate */
sc->sc_rrate = param->sample_rate;
cs4281_set_adc_rate(sc, param->sample_rate);
/* Start DMA */
BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) & ~DCRn_MSK);
/* Enable interrupts */
BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM);
DPRINTF(("HICR=0x%08x\n", BA0READ4(sc, CS4281_HICR)));
DPRINTF(("HIMR=0x%08x\n", BA0READ4(sc, CS4281_HIMR)));
DPRINTF(("DMR1=0x%08x\n", BA0READ4(sc, CS4281_DMR1)));
DPRINTF(("DCR1=0x%08x\n", BA0READ4(sc, CS4281_DCR1)));
return 0;
}
static bool
cs4281_suspend(device_t dv, const pmf_qual_t *qual)
{
struct cs428x_softc *sc = device_private(dv);
mutex_enter(&sc->sc_lock);
mutex_spin_exit(&sc->sc_intr_lock);
/* save current playback status */
if (sc->sc_prun) {
sc->sc_suspend_state.cs4281.dcr0 = BA0READ4(sc, CS4281_DCR0);
sc->sc_suspend_state.cs4281.dmr0 = BA0READ4(sc, CS4281_DMR0);
sc->sc_suspend_state.cs4281.dbc0 = BA0READ4(sc, CS4281_DBC0);
sc->sc_suspend_state.cs4281.dba0 = BA0READ4(sc, CS4281_DBA0);
}
/* save current capture status */
if (sc->sc_rrun) {
sc->sc_suspend_state.cs4281.dcr1 = BA0READ4(sc, CS4281_DCR1);
sc->sc_suspend_state.cs4281.dmr1 = BA0READ4(sc, CS4281_DMR1);
sc->sc_suspend_state.cs4281.dbc1 = BA0READ4(sc, CS4281_DBC1);
sc->sc_suspend_state.cs4281.dba1 = BA0READ4(sc, CS4281_DBA1);
}
/* Stop DMA */
BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK);
BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK);
mutex_spin_exit(&sc->sc_intr_lock);
mutex_exit(&sc->sc_lock);
return true;
}
static bool
cs4281_resume(device_t dv, const pmf_qual_t *qual)
{
struct cs428x_softc *sc = device_private(dv);
mutex_enter(&sc->sc_lock);
mutex_spin_enter(&sc->sc_intr_lock);
cs4281_init(sc, 0);
cs4281_reset_codec(sc);
/* restore ac97 registers */
mutex_spin_exit(&sc->sc_intr_lock);
(*sc->codec_if->vtbl->restore_ports)(sc->codec_if);
mutex_spin_enter(&sc->sc_intr_lock);
/* restore DMA related status */
if (sc->sc_prun) {
cs4281_set_dac_rate(sc, sc->sc_prate);
BA0WRITE4(sc, CS4281_DBA0, sc->sc_suspend_state.cs4281.dba0);
BA0WRITE4(sc, CS4281_DBC0, sc->sc_suspend_state.cs4281.dbc0);
BA0WRITE4(sc, CS4281_DMR0, sc->sc_suspend_state.cs4281.dmr0);
BA0WRITE4(sc, CS4281_DCR0, sc->sc_suspend_state.cs4281.dcr0);
}
if (sc->sc_rrun) {
cs4281_set_adc_rate(sc, sc->sc_rrate);
BA0WRITE4(sc, CS4281_DBA1, sc->sc_suspend_state.cs4281.dba1);
BA0WRITE4(sc, CS4281_DBC1, sc->sc_suspend_state.cs4281.dbc1);
BA0WRITE4(sc, CS4281_DMR1, sc->sc_suspend_state.cs4281.dmr1);
BA0WRITE4(sc, CS4281_DCR1, sc->sc_suspend_state.cs4281.dcr1);
}
/* enable intterupts */
if (sc->sc_prun || sc->sc_rrun)
BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM);
mutex_spin_exit(&sc->sc_intr_lock);
mutex_exit(&sc->sc_lock);
return true;
}
/* control AC97 codec */
static int
cs4281_reset_codec(void *addr)
{
struct cs428x_softc *sc;
uint16_t data;
uint32_t dat32;
int n;
sc = addr;
DPRINTFN(3, ("cs4281_reset_codec\n"));
/* Reset codec */
BA0WRITE4(sc, CS428X_ACCTL, 0);
delay(50); /* delay 50us */
BA0WRITE4(sc, CS4281_SPMC, 0);
delay(100); /* delay 100us */
BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN);
#if defined(ENABLE_SECONDARY_CODEC)
BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E);
BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID);
#endif
delay(50000); /* XXX: delay 50ms */
/* Enable ASYNC generation */
BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN);
/* Wait for codec ready. Linux driver waits 50ms here */
n = 0;
while ((BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY) == 0) {
delay(100);
if (++n > 1000) {
printf("reset_codec: AC97 codec ready timeout\n");
return ETIMEDOUT;
}
}
#if defined(ENABLE_SECONDARY_CODEC)
/* secondary codec ready*/
n = 0;
while ((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) {
delay(100);
if (++n > 1000)
return 0;
}
#endif
/* Set the serial timing configuration */
/* XXX: undocumented but the Linux driver do this */
BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
/* Wait for codec ready signal */
n = 0;
do {
delay(1000);
if (++n > 1000) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for codec ready\n");
return ETIMEDOUT;
}
dat32 = BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY;
} while (dat32 == 0);
/* Enable Valid Frame output on ASDOUT */
BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN | ACCTL_VFRM);
/* Wait until codec calibration is finished. Codec register 26h */
n = 0;
do {
delay(1);
if (++n > 1000) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for codec calibration\n");
return ETIMEDOUT;
}
cs428x_read_codec(sc, AC97_REG_POWER, &data);
} while ((data & 0x0f) != 0x0f);
/* Set the serial timing configuration again */
/* XXX: undocumented but the Linux driver do this */
BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
/* Wait until we've sampled input slots 3 & 4 as valid */
n = 0;
do {
delay(1000);
if (++n > 1000) {
aprint_error_dev(sc->sc_dev, "timeout waiting for "
"sampled input slots as valid\n");
return ETIMEDOUT;
}
dat32 = BA0READ4(sc, CS428X_ACISV) & (ACISV_ISV3 | ACISV_ISV4) ;
} while (dat32 != (ACISV_ISV3 | ACISV_ISV4));
/* Start digital data transfer of audio data to the codec */
BA0WRITE4(sc, CS428X_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4));
return 0;
}
/* Internal functions */
/* convert sample rate to register value */
static uint8_t
cs4281_sr2regval(int rate)
{
uint8_t retval;
/* We don't have to change here. but anyway ... */
if (rate > 48000)
rate = 48000;
if (rate < 6023)
rate = 6023;
switch (rate) {
case 8000:
retval = 5;
break;
case 11025:
retval = 4;
break;
case 16000:
retval = 3;
break;
case 22050:
retval = 2;
break;
case 44100:
retval = 1;
break;
case 48000:
retval = 0;
break;
default:
retval = 1536000/rate; /* == 24576000/(rate*16) */
}
return retval;
}
static void
cs4281_set_adc_rate(struct cs428x_softc *sc, int rate)
{
BA0WRITE4(sc, CS4281_ADCSR, cs4281_sr2regval(rate));
}
static void
cs4281_set_dac_rate(struct cs428x_softc *sc, int rate)
{
BA0WRITE4(sc, CS4281_DACSR, cs4281_sr2regval(rate));
}
static int
cs4281_init(struct cs428x_softc *sc, int init)
{
int n;
uint16_t data;
uint32_t dat32;
/* set "Configuration Write Protect" register to
* 0x4281 to allow to write */
BA0WRITE4(sc, CS4281_CWPR, 0x4281);
/*
* Unset "Full Power-Down bit of Extended PCI Power Management
* Control" register to release the reset state.
*/
dat32 = BA0READ4(sc, CS4281_EPPMC);
if (dat32 & EPPMC_FPDN) {
BA0WRITE4(sc, CS4281_EPPMC, dat32 & ~EPPMC_FPDN);
}
/* Start PLL out in known state */
BA0WRITE4(sc, CS4281_CLKCR1, 0);
/* Start serial ports out in known state */
BA0WRITE4(sc, CS4281_SERMC, 0);
/* Reset codec */
BA0WRITE4(sc, CS428X_ACCTL, 0);
delay(50); /* delay 50us */
BA0WRITE4(sc, CS4281_SPMC, 0);
delay(100); /* delay 100us */
BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN);
#if defined(ENABLE_SECONDARY_CODEC)
BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E);
BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID);
#endif
delay(50000); /* XXX: delay 50ms */
/* Turn on Sound System clocks based on ABITCLK */
BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_DLLP);
delay(50000); /* XXX: delay 50ms */
BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_SWCE | CLKCR1_DLLP);
/* Set enables for sections that are needed in the SSPM registers */
BA0WRITE4(sc, CS4281_SSPM,
SSPM_MIXEN | /* Mixer */
SSPM_CSRCEN | /* Capture SRC */
SSPM_PSRCEN | /* Playback SRC */
SSPM_JSEN | /* Joystick */
SSPM_ACLEN | /* AC LINK */
SSPM_FMEN /* FM */
);
/* Wait for clock stabilization */
n = 0;
#if 1
/* what document says */
while ((BA0READ4(sc, CS4281_CLKCR1)& (CLKCR1_DLLRDY | CLKCR1_CLKON))
!= (CLKCR1_DLLRDY | CLKCR1_CLKON)) {
delay(100);
if (++n > 1000) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for clock stabilization\n");
return -1;
}
}
#else
/* Cirrus driver for Linux does */
while (!(BA0READ4(sc, CS4281_CLKCR1) & CLKCR1_DLLRDY)) {
delay(1000);
if (++n > 1000) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for clock stabilization\n");
return -1;
}
}
#endif
/* Enable ASYNC generation */
BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN);
/* Wait for codec ready. Linux driver waits 50ms here */
n = 0;
while ((BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY) == 0) {
delay(100);
if (++n > 1000) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for codec ready\n");
return -1;
}
}
#if defined(ENABLE_SECONDARY_CODEC)
/* secondary codec ready*/
n = 0;
while ((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) {
delay(100);
if (++n > 1000) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for secondary codec ready\n");
return -1;
}
}
#endif
/* Set the serial timing configuration */
/* XXX: undocumented but the Linux driver do this */
BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
/* Wait for codec ready signal */
n = 0;
do {
delay(1000);
if (++n > 1000) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for codec ready\n");
return -1;
}
dat32 = BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY;
} while (dat32 == 0);
/* Enable Valid Frame output on ASDOUT */
BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN | ACCTL_VFRM);
/* Wait until codec calibration is finished. codec register 26h */
n = 0;
do {
delay(1);
if (++n > 1000) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for codec calibration\n");
return -1;
}
cs428x_read_codec(sc, AC97_REG_POWER, &data);
} while ((data & 0x0f) != 0x0f);
/* Set the serial timing configuration again */
/* XXX: undocumented but the Linux driver do this */
BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
/* Wait until we've sampled input slots 3 & 4 as valid */
n = 0;
do {
delay(1000);
if (++n > 1000) {
aprint_error_dev(sc->sc_dev, "timeout waiting for "
"sampled input slots as valid\n");
return -1;
}
dat32 = BA0READ4(sc, CS428X_ACISV) & (ACISV_ISV3 | ACISV_ISV4);
} while (dat32 != (ACISV_ISV3 | ACISV_ISV4));
/* Start digital data transfer of audio data to the codec */
BA0WRITE4(sc, CS428X_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4));
cs428x_write_codec(sc, AC97_REG_HEADPHONE_VOLUME, 0);
cs428x_write_codec(sc, AC97_REG_MASTER_VOLUME, 0);
/* Power on the DAC */
cs428x_read_codec(sc, AC97_REG_POWER, &data);
cs428x_write_codec(sc, AC97_REG_POWER, data & 0xfdff);
/* Wait until we sample a DAC ready state.
* Not documented, but Linux driver does.
*/
for (n = 0; n < 32; ++n) {
delay(1000);
cs428x_read_codec(sc, AC97_REG_POWER, &data);
if (data & 0x02)
break;
}
/* Power on the ADC */
cs428x_read_codec(sc, AC97_REG_POWER, &data);
cs428x_write_codec(sc, AC97_REG_POWER, data & 0xfeff);
/* Wait until we sample ADC ready state.
* Not documented, but Linux driver does.
*/
for (n = 0; n < 32; ++n) {
delay(1000);
cs428x_read_codec(sc, AC97_REG_POWER, &data);
if (data & 0x01)
break;
}
#if 0
/* Initialize AC-Link features */
/* variable sample-rate support */
mem = BA0READ4(sc, CS4281_SERMC);
mem |= (SERMC_ODSEN1 | SERMC_ODSEN2);
BA0WRITE4(sc, CS4281_SERMC, mem);
/* XXX: more... */
/* Initialize SSCR register features */
/* XXX: hardware volume setting */
BA0WRITE4(sc, CS4281_SSCR, ~SSCR_HVC); /* disable HW volume setting */
#endif
/* disable Sound Blaster Pro emulation */
/* XXX:
* Cannot set since the documents does not describe which bit is
* correspond to SSCR_SB. Since the reset value of SSCR is 0,
* we can ignore it.*/
#if 0
BA0WRITE4(sc, CS4281_SSCR, SSCR_SB);
#endif
/* map AC97 PCM playback to DMA Channel 0 */
/* Reset FEN bit to setup first */
BA0WRITE4(sc, CS4281_FCR0, (BA0READ4(sc, CS4281_FCR0) & ~FCRn_FEN));
/*
*| RS[4:0]/| |
*| LS[4:0] | AC97 | Slot Function
*|---------+--------+--------------------
*| 0 | 3 | Left PCM Playback
*| 1 | 4 | Right PCM Playback
*| 2 | 5 | Phone Line 1 DAC
*| 3 | 6 | Center PCM Playback
*....
* quoted from Table 29(p109)
*/
dat32 = 0x01 << 24 | /* RS[4:0] = 1 see above */
0x00 << 16 | /* LS[4:0] = 0 see above */
0x0f << 8 | /* SZ[6:0] = 15 size of buffer */
0x00 << 0 ; /* OF[6:0] = 0 offset */
BA0WRITE4(sc, CS4281_FCR0, dat32);
BA0WRITE4(sc, CS4281_FCR0, dat32 | FCRn_FEN);
/* map AC97 PCM record to DMA Channel 1 */
/* Reset FEN bit to setup first */
BA0WRITE4(sc, CS4281_FCR1, (BA0READ4(sc, CS4281_FCR1) & ~FCRn_FEN));
/*
*| RS[4:0]/|
*| LS[4:0] | AC97 | Slot Function
*|---------+------+-------------------
*| 10 | 3 | Left PCM Record
*| 11 | 4 | Right PCM Record
*| 12 | 5 | Phone Line 1 ADC
*| 13 | 6 | Mic ADC
*....
* quoted from Table 30(p109)
*/
dat32 = 0x0b << 24 | /* RS[4:0] = 11 See above */
0x0a << 16 | /* LS[4:0] = 10 See above */
0x0f << 8 | /* SZ[6:0] = 15 Size of buffer */
0x10 << 0 ; /* OF[6:0] = 16 offset */
/* XXX: I cannot understand why FCRn_PSH is needed here. */
BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_PSH);
BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_FEN);
#if 0
/* Disable DMA Channel 2, 3 */
BA0WRITE4(sc, CS4281_FCR2, (BA0READ4(sc, CS4281_FCR2) & ~FCRn_FEN));
BA0WRITE4(sc, CS4281_FCR3, (BA0READ4(sc, CS4281_FCR3) & ~FCRn_FEN));
#endif
/* Set the SRC Slot Assignment accordingly */
/*| PLSS[4:0]/
*| PRSS[4:0] | AC97 | Slot Function
*|-----------+------+----------------
*| 0 | 3 | Left PCM Playback
*| 1 | 4 | Right PCM Playback
*| 2 | 5 | phone line 1 DAC
*| 3 | 6 | Center PCM Playback
*| 4 | 7 | Left Surround PCM Playback
*| 5 | 8 | Right Surround PCM Playback
*......
*
*| CLSS[4:0]/
*| CRSS[4:0] | AC97 | Codec |Slot Function
*|-----------+------+-------+-----------------
*| 10 | 3 |Primary| Left PCM Record
*| 11 | 4 |Primary| Right PCM Record
*| 12 | 5 |Primary| Phone Line 1 ADC
*| 13 | 6 |Primary| Mic ADC
*|.....
*| 20 | 3 | Sec. | Left PCM Record
*| 21 | 4 | Sec. | Right PCM Record
*| 22 | 5 | Sec. | Phone Line 1 ADC
*| 23 | 6 | Sec. | Mic ADC
*/
dat32 = 0x0b << 24 | /* CRSS[4:0] Right PCM Record(primary) */
0x0a << 16 | /* CLSS[4:0] Left PCM Record(primary) */
0x01 << 8 | /* PRSS[4:0] Right PCM Playback */
0x00 << 0; /* PLSS[4:0] Left PCM Playback */
BA0WRITE4(sc, CS4281_SRCSA, dat32);
/* Set interrupt to occurred at Half and Full terminal
* count interrupt enable for DMA channel 0 and 1.
* To keep DMA stop, set MSK.
*/
dat32 = DCRn_HTCIE | DCRn_TCIE | DCRn_MSK;
BA0WRITE4(sc, CS4281_DCR0, dat32);
BA0WRITE4(sc, CS4281_DCR1, dat32);
/* Set Auto-Initialize Contorl enable */
BA0WRITE4(sc, CS4281_DMR0,
DMRn_DMA | DMRn_AUTO | DMRn_TR_READ);
BA0WRITE4(sc, CS4281_DMR1,
DMRn_DMA | DMRn_AUTO | DMRn_TR_WRITE);
/* Clear DMA Mask in HIMR */
dat32 = ~HIMR_DMAIM & ~HIMR_D1IM & ~HIMR_D0IM;
BA0WRITE4(sc, CS4281_HIMR,
BA0READ4(sc, CS4281_HIMR) & dat32);
/* set current status */
if (init != 0) {
sc->sc_prun = 0;
sc->sc_rrun = 0;
}
/* setup playback volume */
BA0WRITE4(sc, CS4281_PPRVC, 7);
BA0WRITE4(sc, CS4281_PPLVC, 7);
return 0;
}
Reference in New Issue View Git Blame Copy Permalink