3216 lines
79 KiB
C
3216 lines
79 KiB
C
/* $NetBSD: audio.c,v 1.159 2002/07/10 02:25:49 gson Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1991-1993 Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the Computer Systems
|
|
* Engineering Group at Lawrence Berkeley Laboratory.
|
|
* 4. Neither the name of the University nor of the Laboratory may be used
|
|
* to endorse or promote products derived from this software without
|
|
* specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* This is a (partially) SunOS-compatible /dev/audio driver for NetBSD.
|
|
*
|
|
* This code tries to do something half-way sensible with
|
|
* half-duplex hardware, such as with the SoundBlaster hardware. With
|
|
* half-duplex hardware allowing O_RDWR access doesn't really make
|
|
* sense. However, closing and opening the device to "turn around the
|
|
* line" is relatively expensive and costs a card reset (which can
|
|
* take some time, at least for the SoundBlaster hardware). Instead
|
|
* we allow O_RDWR access, and provide an ioctl to set the "mode",
|
|
* i.e. playing or recording.
|
|
*
|
|
* If you write to a half-duplex device in record mode, the data is
|
|
* tossed. If you read from the device in play mode, you get silence
|
|
* filled buffers at the rate at which samples are naturally
|
|
* generated.
|
|
*
|
|
* If you try to set both play and record mode on a half-duplex
|
|
* device, playing takes precedence.
|
|
*/
|
|
|
|
/*
|
|
* Todo:
|
|
* - Add softaudio() isr processing for wakeup, poll, signals,
|
|
* and silence fill.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: audio.c,v 1.159 2002/07/10 02:25:49 gson Exp $");
|
|
|
|
#include "audio.h"
|
|
#if NAUDIO > 0
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/vnode.h>
|
|
#include <sys/select.h>
|
|
#include <sys/poll.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/signalvar.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/audioio.h>
|
|
#include <sys/device.h>
|
|
|
|
#include <dev/audio_if.h>
|
|
#include <dev/audiovar.h>
|
|
|
|
#include <machine/endian.h>
|
|
|
|
#ifdef AUDIO_DEBUG
|
|
#define DPRINTF(x) if (audiodebug) printf x
|
|
#define DPRINTFN(n,x) if (audiodebug>(n)) printf x
|
|
int audiodebug = AUDIO_DEBUG;
|
|
#else
|
|
#define DPRINTF(x)
|
|
#define DPRINTFN(n,x)
|
|
#endif
|
|
|
|
#define ROUNDSIZE(x) x &= -16 /* round to nice boundary */
|
|
|
|
int audio_blk_ms = AUDIO_BLK_MS;
|
|
|
|
int audiosetinfo(struct audio_softc *, struct audio_info *);
|
|
int audiogetinfo(struct audio_softc *, struct audio_info *);
|
|
|
|
int audio_open(dev_t, struct audio_softc *, int, int, struct proc *);
|
|
int audio_close(struct audio_softc *, int, int, struct proc *);
|
|
int audio_read(struct audio_softc *, struct uio *, int);
|
|
int audio_write(struct audio_softc *, struct uio *, int);
|
|
int audio_ioctl(struct audio_softc *, u_long, caddr_t, int, struct proc *);
|
|
int audio_poll(struct audio_softc *, int, struct proc *);
|
|
paddr_t audio_mmap(struct audio_softc *, off_t, int);
|
|
|
|
int mixer_open(dev_t, struct audio_softc *, int, int, struct proc *);
|
|
int mixer_close(struct audio_softc *, int, int, struct proc *);
|
|
int mixer_ioctl(struct audio_softc *, u_long, caddr_t, int, struct proc *);
|
|
static void mixer_remove(struct audio_softc *, struct proc *p);
|
|
static void mixer_signal(struct audio_softc *);
|
|
|
|
void audio_init_record(struct audio_softc *);
|
|
void audio_init_play(struct audio_softc *);
|
|
int audiostartr(struct audio_softc *);
|
|
int audiostartp(struct audio_softc *);
|
|
void audio_rint(void *);
|
|
void audio_pint(void *);
|
|
int audio_check_params(struct audio_params *);
|
|
|
|
void audio_calc_blksize(struct audio_softc *, int);
|
|
void audio_fill_silence(struct audio_params *, u_char *, int);
|
|
int audio_silence_copyout(struct audio_softc *, int, struct uio *);
|
|
|
|
void audio_init_ringbuffer(struct audio_ringbuffer *);
|
|
int audio_initbufs(struct audio_softc *);
|
|
void audio_calcwater(struct audio_softc *);
|
|
static __inline int audio_sleep_timo(int *, char *, int);
|
|
static __inline int audio_sleep(int *, char *);
|
|
static __inline void audio_wakeup(int *);
|
|
int audio_drain(struct audio_softc *);
|
|
void audio_clear(struct audio_softc *);
|
|
static __inline void audio_pint_silence
|
|
(struct audio_softc *, struct audio_ringbuffer *, u_char *, int);
|
|
|
|
int audio_alloc_ring
|
|
(struct audio_softc *, struct audio_ringbuffer *, int, size_t);
|
|
void audio_free_ring(struct audio_softc *, struct audio_ringbuffer *);
|
|
|
|
int audioprobe(struct device *, struct cfdata *, void *);
|
|
void audioattach(struct device *, struct device *, void *);
|
|
int audiodetach(struct device *, int);
|
|
int audioactivate(struct device *, enum devact);
|
|
|
|
struct portname {
|
|
char *name;
|
|
int mask;
|
|
};
|
|
static struct portname itable[] = {
|
|
{ AudioNmicrophone, AUDIO_MICROPHONE },
|
|
{ AudioNline, AUDIO_LINE_IN },
|
|
{ AudioNcd, AUDIO_CD },
|
|
{ 0 }
|
|
};
|
|
static struct portname otable[] = {
|
|
{ AudioNspeaker, AUDIO_SPEAKER },
|
|
{ AudioNheadphone, AUDIO_HEADPHONE },
|
|
{ AudioNline, AUDIO_LINE_OUT },
|
|
{ 0 }
|
|
};
|
|
void au_check_ports(struct audio_softc *, struct au_mixer_ports *,
|
|
mixer_devinfo_t *, int, char *, char *,
|
|
struct portname *);
|
|
int au_set_gain(struct audio_softc *, struct au_mixer_ports *,
|
|
int, int);
|
|
void au_get_gain(struct audio_softc *, struct au_mixer_ports *,
|
|
u_int *, u_char *);
|
|
int au_set_port(struct audio_softc *, struct au_mixer_ports *,
|
|
u_int);
|
|
int au_get_port(struct audio_softc *, struct au_mixer_ports *);
|
|
int au_get_lr_value(struct audio_softc *, mixer_ctrl_t *,
|
|
int *, int *r);
|
|
int au_set_lr_value(struct audio_softc *, mixer_ctrl_t *,
|
|
int, int);
|
|
int au_portof(struct audio_softc *, char *);
|
|
|
|
|
|
/* The default audio mode: 8 kHz mono ulaw */
|
|
struct audio_params audio_default =
|
|
{ 8000, AUDIO_ENCODING_ULAW, 8, 1, 0, 1, 1 };
|
|
|
|
struct cfattach audio_ca = {
|
|
sizeof(struct audio_softc), audioprobe, audioattach,
|
|
audiodetach, audioactivate
|
|
};
|
|
|
|
extern struct cfdriver audio_cd;
|
|
|
|
int
|
|
audioprobe(struct device *parent, struct cfdata *match, void *aux)
|
|
{
|
|
struct audio_attach_args *sa = aux;
|
|
|
|
DPRINTF(("audioprobe: type=%d sa=%p hw=%p\n",
|
|
sa->type, sa, sa->hwif));
|
|
return (sa->type == AUDIODEV_TYPE_AUDIO) ? 1 : 0;
|
|
}
|
|
|
|
void
|
|
audioattach(struct device *parent, struct device *self, void *aux)
|
|
{
|
|
struct audio_softc *sc = (void *)self;
|
|
struct audio_attach_args *sa = aux;
|
|
struct audio_hw_if *hwp = sa->hwif;
|
|
void *hdlp = sa->hdl;
|
|
int error;
|
|
mixer_devinfo_t mi;
|
|
int iclass, oclass, props;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (hwp == 0 ||
|
|
hwp->open == 0 ||
|
|
hwp->close == 0 ||
|
|
hwp->query_encoding == 0 ||
|
|
hwp->set_params == 0 ||
|
|
(hwp->start_output == 0 && hwp->trigger_output == 0) ||
|
|
(hwp->start_input == 0 && hwp->trigger_input == 0) ||
|
|
hwp->halt_output == 0 ||
|
|
hwp->halt_input == 0 ||
|
|
hwp->getdev == 0 ||
|
|
hwp->set_port == 0 ||
|
|
hwp->get_port == 0 ||
|
|
hwp->query_devinfo == 0 ||
|
|
hwp->get_props == 0) {
|
|
printf(": missing method\n");
|
|
sc->hw_if = 0;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
props = hwp->get_props(hdlp);
|
|
|
|
if (props & AUDIO_PROP_FULLDUPLEX)
|
|
printf(": full duplex");
|
|
else
|
|
printf(": half duplex");
|
|
|
|
if (props & AUDIO_PROP_MMAP)
|
|
printf(", mmap");
|
|
if (props & AUDIO_PROP_INDEPENDENT)
|
|
printf(", independent");
|
|
|
|
printf("\n");
|
|
|
|
sc->hw_if = hwp;
|
|
sc->hw_hdl = hdlp;
|
|
sc->sc_dev = parent;
|
|
|
|
error = audio_alloc_ring(sc, &sc->sc_pr, AUMODE_PLAY, AU_RING_SIZE);
|
|
if (error) {
|
|
sc->hw_if = 0;
|
|
printf("audio: could not allocate play buffer\n");
|
|
return;
|
|
}
|
|
error = audio_alloc_ring(sc, &sc->sc_rr, AUMODE_RECORD, AU_RING_SIZE);
|
|
if (error) {
|
|
audio_free_ring(sc, &sc->sc_pr);
|
|
sc->hw_if = 0;
|
|
printf("audio: could not allocate record buffer\n");
|
|
return;
|
|
}
|
|
|
|
sc->sc_pconvbuffer = malloc(AU_RING_SIZE, M_DEVBUF, M_WAITOK);
|
|
sc->sc_pconvbuffer_size = AU_RING_SIZE;
|
|
sc->sc_rconvbuffer = malloc(AU_RING_SIZE, M_DEVBUF, M_WAITOK);
|
|
sc->sc_rconvbuffer_size = AU_RING_SIZE;
|
|
/*
|
|
* Set default softc params
|
|
*/
|
|
sc->sc_pparams = audio_default;
|
|
sc->sc_rparams = audio_default;
|
|
|
|
/* Set up some default values */
|
|
sc->sc_blkset = 0;
|
|
audio_calc_blksize(sc, AUMODE_RECORD);
|
|
audio_calc_blksize(sc, AUMODE_PLAY);
|
|
audio_init_ringbuffer(&sc->sc_rr);
|
|
audio_init_ringbuffer(&sc->sc_pr);
|
|
audio_calcwater(sc);
|
|
sc->sc_input_fragment_length = 0;
|
|
|
|
iclass = oclass = -1;
|
|
sc->sc_inports.index = -1;
|
|
sc->sc_inports.master = -1;
|
|
sc->sc_inports.nports = 0;
|
|
sc->sc_inports.isenum = 0;
|
|
sc->sc_inports.allports = 0;
|
|
sc->sc_outports.index = -1;
|
|
sc->sc_outports.master = -1;
|
|
sc->sc_outports.nports = 0;
|
|
sc->sc_outports.isenum = 0;
|
|
sc->sc_outports.allports = 0;
|
|
sc->sc_monitor_port = -1;
|
|
for(mi.index = 0; ; mi.index++) {
|
|
if (hwp->query_devinfo(hdlp, &mi) != 0)
|
|
break;
|
|
if (mi.type == AUDIO_MIXER_CLASS &&
|
|
strcmp(mi.label.name, AudioCrecord) == 0)
|
|
iclass = mi.index;
|
|
if (mi.type == AUDIO_MIXER_CLASS &&
|
|
strcmp(mi.label.name, AudioCmonitor) == 0)
|
|
oclass = mi.index;
|
|
}
|
|
for(mi.index = 0; ; mi.index++) {
|
|
if (hwp->query_devinfo(hdlp, &mi) != 0)
|
|
break;
|
|
if (mi.type == AUDIO_MIXER_CLASS)
|
|
continue;
|
|
au_check_ports(sc, &sc->sc_inports, &mi, iclass,
|
|
AudioNsource, AudioNrecord, itable);
|
|
au_check_ports(sc, &sc->sc_outports, &mi, oclass,
|
|
AudioNoutput, AudioNmaster, otable);
|
|
if (mi.mixer_class == oclass &&
|
|
(strcmp(mi.label.name, AudioNmonitor) == 0))
|
|
sc->sc_monitor_port = mi.index;
|
|
}
|
|
DPRINTF(("audio_attach: inputs ports=0x%x, input master=%d, "
|
|
"output ports=0x%x, output master=%d\n",
|
|
sc->sc_inports.allports, sc->sc_inports.master,
|
|
sc->sc_outports.allports, sc->sc_outports.master));
|
|
}
|
|
|
|
int
|
|
audioactivate(struct device *self, enum devact act)
|
|
{
|
|
struct audio_softc *sc = (struct audio_softc *)self;
|
|
|
|
switch (act) {
|
|
case DVACT_ACTIVATE:
|
|
return (EOPNOTSUPP);
|
|
break;
|
|
|
|
case DVACT_DEACTIVATE:
|
|
sc->sc_dying = 1;
|
|
break;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
audiodetach(struct device *self, int flags)
|
|
{
|
|
struct audio_softc *sc = (struct audio_softc *)self;
|
|
int maj, mn;
|
|
int s;
|
|
|
|
DPRINTF(("audio_detach: sc=%p flags=%d\n", sc, flags));
|
|
|
|
sc->sc_dying = 1;
|
|
|
|
wakeup(&sc->sc_wchan);
|
|
wakeup(&sc->sc_rchan);
|
|
s = splaudio();
|
|
if (--sc->sc_refcnt >= 0) {
|
|
if (tsleep(&sc->sc_refcnt, PZERO, "auddet", hz * 120))
|
|
printf("audiodetach: %s didn't detach\n",
|
|
sc->dev.dv_xname);
|
|
}
|
|
splx(s);
|
|
|
|
/* free resources */
|
|
audio_free_ring(sc, &sc->sc_pr);
|
|
audio_free_ring(sc, &sc->sc_rr);
|
|
free(sc->sc_pconvbuffer, M_DEVBUF);
|
|
free(sc->sc_rconvbuffer, M_DEVBUF);
|
|
|
|
/* locate the major number */
|
|
for (maj = 0; maj < nchrdev; maj++)
|
|
if (cdevsw[maj].d_open == audioopen)
|
|
break;
|
|
|
|
/* Nuke the vnodes for any open instances (calls close). */
|
|
mn = self->dv_unit;
|
|
vdevgone(maj, mn | SOUND_DEVICE, mn | SOUND_DEVICE, VCHR);
|
|
vdevgone(maj, mn | AUDIO_DEVICE, mn | AUDIO_DEVICE, VCHR);
|
|
vdevgone(maj, mn | AUDIOCTL_DEVICE, mn | AUDIOCTL_DEVICE, VCHR);
|
|
vdevgone(maj, mn | MIXER_DEVICE, mn | MIXER_DEVICE, VCHR);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
au_portof(struct audio_softc *sc, char *name)
|
|
{
|
|
mixer_devinfo_t mi;
|
|
|
|
for(mi.index = 0;
|
|
sc->hw_if->query_devinfo(sc->hw_hdl, &mi) == 0;
|
|
mi.index++)
|
|
if (strcmp(mi.label.name, name) == 0)
|
|
return mi.index;
|
|
return -1;
|
|
}
|
|
|
|
void
|
|
au_check_ports(struct audio_softc *sc, struct au_mixer_ports *ports,
|
|
mixer_devinfo_t *mi, int cls, char *name, char *mname,
|
|
struct portname *tbl)
|
|
{
|
|
int i, j;
|
|
|
|
if (mi->mixer_class != cls)
|
|
return;
|
|
if (strcmp(mi->label.name, mname) == 0) {
|
|
ports->master = mi->index;
|
|
return;
|
|
}
|
|
if (strcmp(mi->label.name, name) != 0)
|
|
return;
|
|
if (mi->type == AUDIO_MIXER_ENUM) {
|
|
ports->index = mi->index;
|
|
for(i = 0; tbl[i].name; i++) {
|
|
for(j = 0; j < mi->un.e.num_mem; j++) {
|
|
if (strcmp(mi->un.e.member[j].label.name,
|
|
tbl[i].name) == 0) {
|
|
ports->aumask[ports->nports] = tbl[i].mask;
|
|
ports->misel [ports->nports] = mi->un.e.member[j].ord;
|
|
ports->miport[ports->nports++] =
|
|
au_portof(sc, mi->un.e.member[j].label.name);
|
|
ports->allports |= tbl[i].mask;
|
|
}
|
|
}
|
|
}
|
|
ports->isenum = 1;
|
|
} else if (mi->type == AUDIO_MIXER_SET) {
|
|
ports->index = mi->index;
|
|
for(i = 0; tbl[i].name; i++) {
|
|
for(j = 0; j < mi->un.s.num_mem; j++) {
|
|
if (strcmp(mi->un.s.member[j].label.name,
|
|
tbl[i].name) == 0) {
|
|
ports->aumask[ports->nports] = tbl[i].mask;
|
|
ports->misel [ports->nports] = mi->un.s.member[j].mask;
|
|
ports->miport[ports->nports++] =
|
|
au_portof(sc, mi->un.s.member[j].label.name);
|
|
ports->allports |= tbl[i].mask;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Called from hardware driver. This is where the MI audio driver gets
|
|
* probed/attached to the hardware driver.
|
|
*/
|
|
struct device *
|
|
audio_attach_mi(struct audio_hw_if *ahwp, void *hdlp, struct device *dev)
|
|
{
|
|
struct audio_attach_args arg;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (ahwp == NULL) {
|
|
printf("audio_attach_mi: NULL\n");
|
|
return (0);
|
|
}
|
|
#endif
|
|
arg.type = AUDIODEV_TYPE_AUDIO;
|
|
arg.hwif = ahwp;
|
|
arg.hdl = hdlp;
|
|
return (config_found(dev, &arg, audioprint));
|
|
}
|
|
|
|
#ifdef AUDIO_DEBUG
|
|
void audio_printsc(struct audio_softc *);
|
|
void audio_print_params(char *, struct audio_params *);
|
|
|
|
void
|
|
audio_printsc(struct audio_softc *sc)
|
|
{
|
|
printf("hwhandle %p hw_if %p ", sc->hw_hdl, sc->hw_if);
|
|
printf("open 0x%x mode 0x%x\n", sc->sc_open, sc->sc_mode);
|
|
printf("rchan 0x%x wchan 0x%x ", sc->sc_rchan, sc->sc_wchan);
|
|
printf("rring used 0x%x pring used=%d\n",
|
|
sc->sc_rr.used, sc->sc_pr.used);
|
|
printf("rbus 0x%x pbus 0x%x ", sc->sc_rbus, sc->sc_pbus);
|
|
printf("blksize %d", sc->sc_pr.blksize);
|
|
printf("hiwat %d lowat %d\n", sc->sc_pr.usedhigh, sc->sc_pr.usedlow);
|
|
}
|
|
|
|
void
|
|
audio_print_params(char *s, struct audio_params *p)
|
|
{
|
|
printf("audio: %s sr=%ld, enc=%d, chan=%d, prec=%d\n", s,
|
|
p->sample_rate, p->encoding, p->channels, p->precision);
|
|
}
|
|
#endif
|
|
|
|
int
|
|
audio_alloc_ring(struct audio_softc *sc, struct audio_ringbuffer *r,
|
|
int direction, size_t bufsize)
|
|
{
|
|
struct audio_hw_if *hw = sc->hw_if;
|
|
void *hdl = sc->hw_hdl;
|
|
/*
|
|
* Alloc DMA play and record buffers
|
|
*/
|
|
if (bufsize < AUMINBUF)
|
|
bufsize = AUMINBUF;
|
|
ROUNDSIZE(bufsize);
|
|
if (hw->round_buffersize)
|
|
bufsize = hw->round_buffersize(hdl, direction, bufsize);
|
|
if (hw->allocm)
|
|
r->start = hw->allocm(hdl, direction, bufsize,
|
|
M_DEVBUF, M_WAITOK);
|
|
else
|
|
r->start = malloc(bufsize, M_DEVBUF, M_WAITOK);
|
|
if (r->start == 0)
|
|
return ENOMEM;
|
|
r->bufsize = bufsize;
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
audio_free_ring(struct audio_softc *sc, struct audio_ringbuffer *r)
|
|
{
|
|
|
|
if (sc->hw_if->freem)
|
|
sc->hw_if->freem(sc->hw_hdl, r->start, M_DEVBUF);
|
|
else
|
|
free(r->start, M_DEVBUF);
|
|
r->start = 0;
|
|
}
|
|
|
|
int
|
|
audioopen(dev_t dev, int flags, int ifmt, struct proc *p)
|
|
{
|
|
struct audio_softc *sc;
|
|
int error;
|
|
|
|
sc = device_lookup(&audio_cd, AUDIOUNIT(dev));
|
|
if (sc == NULL)
|
|
return (ENXIO);
|
|
|
|
if (sc->sc_dying)
|
|
return (EIO);
|
|
|
|
sc->sc_refcnt++;
|
|
switch (AUDIODEV(dev)) {
|
|
case SOUND_DEVICE:
|
|
case AUDIO_DEVICE:
|
|
error = audio_open(dev, sc, flags, ifmt, p);
|
|
break;
|
|
case AUDIOCTL_DEVICE:
|
|
error = 0;
|
|
break;
|
|
case MIXER_DEVICE:
|
|
error = mixer_open(dev, sc, flags, ifmt, p);
|
|
break;
|
|
default:
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
if (--sc->sc_refcnt < 0)
|
|
wakeup(&sc->sc_refcnt);
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
audioclose(dev_t dev, int flags, int ifmt, struct proc *p)
|
|
{
|
|
int unit = AUDIOUNIT(dev);
|
|
struct audio_softc *sc = audio_cd.cd_devs[unit];
|
|
int error;
|
|
|
|
switch (AUDIODEV(dev)) {
|
|
case SOUND_DEVICE:
|
|
case AUDIO_DEVICE:
|
|
error = audio_close(sc, flags, ifmt, p);
|
|
break;
|
|
case MIXER_DEVICE:
|
|
error = mixer_close(sc, flags, ifmt, p);
|
|
break;
|
|
case AUDIOCTL_DEVICE:
|
|
error = 0;
|
|
break;
|
|
default:
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
audioread(dev_t dev, struct uio *uio, int ioflag)
|
|
{
|
|
struct audio_softc *sc;
|
|
int error;
|
|
|
|
sc = device_lookup(&audio_cd, AUDIOUNIT(dev));
|
|
if (sc == NULL)
|
|
return (ENXIO);
|
|
|
|
if (sc->sc_dying)
|
|
return (EIO);
|
|
|
|
sc->sc_refcnt++;
|
|
switch (AUDIODEV(dev)) {
|
|
case SOUND_DEVICE:
|
|
case AUDIO_DEVICE:
|
|
error = audio_read(sc, uio, ioflag);
|
|
break;
|
|
case AUDIOCTL_DEVICE:
|
|
case MIXER_DEVICE:
|
|
error = ENODEV;
|
|
break;
|
|
default:
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
if (--sc->sc_refcnt < 0)
|
|
wakeup(&sc->sc_refcnt);
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
audiowrite(dev_t dev, struct uio *uio, int ioflag)
|
|
{
|
|
struct audio_softc *sc;
|
|
int error;
|
|
|
|
sc = device_lookup(&audio_cd, AUDIOUNIT(dev));
|
|
if (sc == NULL)
|
|
return (ENXIO);
|
|
|
|
if (sc->sc_dying)
|
|
return (EIO);
|
|
|
|
sc->sc_refcnt++;
|
|
switch (AUDIODEV(dev)) {
|
|
case SOUND_DEVICE:
|
|
case AUDIO_DEVICE:
|
|
error = audio_write(sc, uio, ioflag);
|
|
break;
|
|
case AUDIOCTL_DEVICE:
|
|
case MIXER_DEVICE:
|
|
error = ENODEV;
|
|
break;
|
|
default:
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
if (--sc->sc_refcnt < 0)
|
|
wakeup(&sc->sc_refcnt);
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
audioioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, struct proc *p)
|
|
{
|
|
int unit = AUDIOUNIT(dev);
|
|
struct audio_softc *sc = audio_cd.cd_devs[unit];
|
|
int error;
|
|
|
|
if (sc->sc_dying)
|
|
return (EIO);
|
|
|
|
sc->sc_refcnt++;
|
|
switch (AUDIODEV(dev)) {
|
|
case SOUND_DEVICE:
|
|
case AUDIO_DEVICE:
|
|
case AUDIOCTL_DEVICE:
|
|
error = audio_ioctl(sc, cmd, addr, flag, p);
|
|
break;
|
|
case MIXER_DEVICE:
|
|
error = mixer_ioctl(sc, cmd, addr, flag, p);
|
|
break;
|
|
default:
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
if (--sc->sc_refcnt < 0)
|
|
wakeup(&sc->sc_refcnt);
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
audiopoll(dev_t dev, int events, struct proc *p)
|
|
{
|
|
int unit = AUDIOUNIT(dev);
|
|
struct audio_softc *sc = audio_cd.cd_devs[unit];
|
|
int error;
|
|
|
|
if (sc->sc_dying)
|
|
return (EIO);
|
|
|
|
sc->sc_refcnt++;
|
|
switch (AUDIODEV(dev)) {
|
|
case SOUND_DEVICE:
|
|
case AUDIO_DEVICE:
|
|
error = audio_poll(sc, events, p);
|
|
break;
|
|
case AUDIOCTL_DEVICE:
|
|
case MIXER_DEVICE:
|
|
error = ENODEV;
|
|
break;
|
|
default:
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
if (--sc->sc_refcnt < 0)
|
|
wakeup(&sc->sc_refcnt);
|
|
return (error);
|
|
}
|
|
|
|
paddr_t
|
|
audiommap(dev_t dev, off_t off, int prot)
|
|
{
|
|
int unit = AUDIOUNIT(dev);
|
|
struct audio_softc *sc = audio_cd.cd_devs[unit];
|
|
paddr_t error;
|
|
|
|
if (sc->sc_dying)
|
|
return (-1);
|
|
|
|
sc->sc_refcnt++;
|
|
switch (AUDIODEV(dev)) {
|
|
case SOUND_DEVICE:
|
|
case AUDIO_DEVICE:
|
|
error = audio_mmap(sc, off, prot);
|
|
break;
|
|
case AUDIOCTL_DEVICE:
|
|
case MIXER_DEVICE:
|
|
error = -1;
|
|
break;
|
|
default:
|
|
error = -1;
|
|
break;
|
|
}
|
|
if (--sc->sc_refcnt < 0)
|
|
wakeup(&sc->sc_refcnt);
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Audio driver
|
|
*/
|
|
void
|
|
audio_init_ringbuffer(struct audio_ringbuffer *rp)
|
|
{
|
|
int nblks;
|
|
int blksize = rp->blksize;
|
|
|
|
if (blksize < AUMINBLK)
|
|
blksize = AUMINBLK;
|
|
nblks = rp->bufsize / blksize;
|
|
if (nblks < AUMINNOBLK) {
|
|
nblks = AUMINNOBLK;
|
|
blksize = rp->bufsize / nblks;
|
|
ROUNDSIZE(blksize);
|
|
}
|
|
DPRINTF(("audio_init_ringbuffer: blksize=%d\n", blksize));
|
|
rp->blksize = blksize;
|
|
rp->maxblks = nblks;
|
|
rp->used = 0;
|
|
rp->end = rp->start + nblks * blksize;
|
|
rp->inp = rp->outp = rp->start;
|
|
rp->stamp = 0;
|
|
rp->drops = 0;
|
|
rp->pause = 0;
|
|
rp->copying = 0;
|
|
rp->needfill = 0;
|
|
rp->mmapped = 0;
|
|
}
|
|
|
|
int
|
|
audio_initbufs(struct audio_softc *sc)
|
|
{
|
|
struct audio_hw_if *hw = sc->hw_if;
|
|
int error;
|
|
|
|
DPRINTF(("audio_initbufs: mode=0x%x\n", sc->sc_mode));
|
|
audio_init_ringbuffer(&sc->sc_rr);
|
|
#if NAURATECONV > 0
|
|
auconv_init_context(&sc->sc_rconv, sc->sc_rparams.hw_sample_rate,
|
|
sc->sc_rparams.sample_rate,
|
|
sc->sc_rr.start, sc->sc_rr.end);
|
|
#endif
|
|
if (hw->init_input && (sc->sc_mode & AUMODE_RECORD)) {
|
|
error = hw->init_input(sc->hw_hdl, sc->sc_rr.start,
|
|
sc->sc_rr.end - sc->sc_rr.start);
|
|
if (error)
|
|
return error;
|
|
}
|
|
|
|
audio_init_ringbuffer(&sc->sc_pr);
|
|
#if NAURATECONV > 0
|
|
auconv_init_context(&sc->sc_pconv, sc->sc_pparams.sample_rate,
|
|
sc->sc_pparams.hw_sample_rate,
|
|
sc->sc_pr.start, sc->sc_pr.end);
|
|
#endif
|
|
sc->sc_sil_count = 0;
|
|
if (hw->init_output && (sc->sc_mode & AUMODE_PLAY)) {
|
|
error = hw->init_output(sc->hw_hdl, sc->sc_pr.start,
|
|
sc->sc_pr.end - sc->sc_pr.start);
|
|
if (error)
|
|
return error;
|
|
}
|
|
|
|
#ifdef AUDIO_INTR_TIME
|
|
#define double u_long
|
|
sc->sc_pnintr = 0;
|
|
sc->sc_pblktime = (u_long)(
|
|
(double)sc->sc_pr.blksize * 100000 /
|
|
(double)(sc->sc_pparams.precision / NBBY *
|
|
sc->sc_pparams.channels *
|
|
sc->sc_pparams.sample_rate)) * 10;
|
|
DPRINTF(("audio: play blktime = %lu for %d\n",
|
|
sc->sc_pblktime, sc->sc_pr.blksize));
|
|
sc->sc_rnintr = 0;
|
|
sc->sc_rblktime = (u_long)(
|
|
(double)sc->sc_rr.blksize * 100000 /
|
|
(double)(sc->sc_rparams.precision / NBBY *
|
|
sc->sc_rparams.channels *
|
|
sc->sc_rparams.sample_rate)) * 10;
|
|
DPRINTF(("audio: record blktime = %lu for %d\n",
|
|
sc->sc_rblktime, sc->sc_rr.blksize));
|
|
#undef double
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
audio_calcwater(struct audio_softc *sc)
|
|
{
|
|
sc->sc_pr.usedhigh = sc->sc_pr.end - sc->sc_pr.start;
|
|
sc->sc_pr.usedlow = sc->sc_pr.usedhigh * 3 / 4; /* set low at 75% */
|
|
if (sc->sc_pr.usedlow == sc->sc_pr.usedhigh)
|
|
sc->sc_pr.usedlow -= sc->sc_pr.blksize;
|
|
sc->sc_rr.usedhigh =
|
|
sc->sc_pr.end - sc->sc_pr.start - sc->sc_pr.blksize;
|
|
sc->sc_rr.usedlow = 0;
|
|
}
|
|
|
|
static __inline int
|
|
audio_sleep_timo(int *chan, char *label, int timo)
|
|
{
|
|
int st;
|
|
|
|
if (!label)
|
|
label = "audio";
|
|
|
|
DPRINTFN(3, ("audio_sleep_timo: chan=%p, label=%s, timo=%d\n",
|
|
chan, label, timo));
|
|
*chan = 1;
|
|
st = tsleep(chan, PWAIT | PCATCH, label, timo);
|
|
*chan = 0;
|
|
#ifdef AUDIO_DEBUG
|
|
if (st != 0 && st != EINTR)
|
|
DPRINTF(("audio_sleep: woke up st=%d\n", st));
|
|
#endif
|
|
return (st);
|
|
}
|
|
|
|
static __inline int
|
|
audio_sleep(int *chan, char *label)
|
|
{
|
|
return audio_sleep_timo(chan, label, 0);
|
|
}
|
|
|
|
/* call at splaudio() */
|
|
static __inline void
|
|
audio_wakeup(int *chan)
|
|
{
|
|
DPRINTFN(3, ("audio_wakeup: chan=%p, *chan=%d\n", chan, *chan));
|
|
if (*chan) {
|
|
wakeup(chan);
|
|
*chan = 0;
|
|
}
|
|
}
|
|
|
|
int
|
|
audio_open(dev_t dev, struct audio_softc *sc, int flags, int ifmt,
|
|
struct proc *p)
|
|
{
|
|
int error;
|
|
int mode;
|
|
struct audio_hw_if *hw;
|
|
struct audio_info ai;
|
|
|
|
hw = sc->hw_if;
|
|
if (!hw)
|
|
return ENXIO;
|
|
|
|
DPRINTF(("audio_open: flags=0x%x sc=%p hdl=%p\n",
|
|
flags, sc, sc->hw_hdl));
|
|
|
|
if ((sc->sc_open & (AUOPEN_READ|AUOPEN_WRITE)) != 0)
|
|
return (EBUSY);
|
|
|
|
error = hw->open(sc->hw_hdl, flags);
|
|
if (error)
|
|
return (error);
|
|
|
|
sc->sc_async_audio = 0;
|
|
sc->sc_rchan = 0;
|
|
sc->sc_wchan = 0;
|
|
sc->sc_blkset = 0; /* Block sizes not set yet */
|
|
sc->sc_sil_count = 0;
|
|
sc->sc_rbus = 0;
|
|
sc->sc_pbus = 0;
|
|
sc->sc_eof = 0;
|
|
sc->sc_playdrop = 0;
|
|
|
|
sc->sc_full_duplex = 0;
|
|
/* doesn't always work right on SB.
|
|
(flags & (FWRITE|FREAD)) == (FWRITE|FREAD) &&
|
|
(hw->get_props(sc->hw_hdl) & AUDIO_PROP_FULLDUPLEX);
|
|
*/
|
|
|
|
mode = 0;
|
|
if (flags & FREAD) {
|
|
sc->sc_open |= AUOPEN_READ;
|
|
mode |= AUMODE_RECORD;
|
|
}
|
|
if (flags & FWRITE) {
|
|
sc->sc_open |= AUOPEN_WRITE;
|
|
mode |= AUMODE_PLAY | AUMODE_PLAY_ALL;
|
|
}
|
|
|
|
/*
|
|
* Multiplex device: /dev/audio (MU-Law) and /dev/sound (linear)
|
|
* The /dev/audio is always (re)set to 8-bit MU-Law mono
|
|
* For the other devices, you get what they were last set to.
|
|
*/
|
|
if (ISDEVAUDIO(dev)) {
|
|
/* /dev/audio */
|
|
sc->sc_rparams = audio_default;
|
|
sc->sc_pparams = audio_default;
|
|
}
|
|
#ifdef DIAGNOSTIC
|
|
/*
|
|
* Sample rate and precision are supposed to be set to proper
|
|
* default values by the hardware driver, so that it may give
|
|
* us these values.
|
|
*/
|
|
if (sc->sc_rparams.precision == 0 || sc->sc_pparams.precision == 0) {
|
|
printf("audio_open: 0 precision\n");
|
|
return EINVAL;
|
|
}
|
|
#endif
|
|
|
|
AUDIO_INITINFO(&ai);
|
|
ai.record.sample_rate = sc->sc_rparams.sample_rate;
|
|
ai.record.encoding = sc->sc_rparams.encoding;
|
|
ai.record.channels = sc->sc_rparams.channels;
|
|
ai.record.precision = sc->sc_rparams.precision;
|
|
ai.play.sample_rate = sc->sc_pparams.sample_rate;
|
|
ai.play.encoding = sc->sc_pparams.encoding;
|
|
ai.play.channels = sc->sc_pparams.channels;
|
|
ai.play.precision = sc->sc_pparams.precision;
|
|
ai.mode = mode;
|
|
error = audiosetinfo(sc, &ai);
|
|
if (error)
|
|
goto bad;
|
|
/* audio_close() decreases sc_pr.usedlow, recalculate here */
|
|
audio_calcwater(sc);
|
|
|
|
DPRINTF(("audio_open: done sc_mode = 0x%x\n", sc->sc_mode));
|
|
|
|
return 0;
|
|
|
|
bad:
|
|
hw->close(sc->hw_hdl);
|
|
sc->sc_open = 0;
|
|
sc->sc_mode = 0;
|
|
sc->sc_full_duplex = 0;
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Must be called from task context.
|
|
*/
|
|
void
|
|
audio_init_record(struct audio_softc *sc)
|
|
{
|
|
int s = splaudio();
|
|
|
|
if (sc->hw_if->speaker_ctl &&
|
|
(!sc->sc_full_duplex || (sc->sc_mode & AUMODE_PLAY) == 0))
|
|
sc->hw_if->speaker_ctl(sc->hw_hdl, SPKR_OFF);
|
|
sc->sc_rconvbuffer_begin = 0;
|
|
sc->sc_rconvbuffer_end = 0;
|
|
splx(s);
|
|
}
|
|
|
|
/*
|
|
* Must be called from task context.
|
|
*/
|
|
void
|
|
audio_init_play(struct audio_softc *sc)
|
|
{
|
|
int s = splaudio();
|
|
|
|
sc->sc_wstamp = sc->sc_pr.stamp;
|
|
if (sc->hw_if->speaker_ctl)
|
|
sc->hw_if->speaker_ctl(sc->hw_hdl, SPKR_ON);
|
|
sc->sc_input_fragment_length = 0;
|
|
splx(s);
|
|
}
|
|
|
|
int
|
|
audio_drain(struct audio_softc *sc)
|
|
{
|
|
int error, drops;
|
|
struct audio_ringbuffer *cb = &sc->sc_pr;
|
|
int s;
|
|
|
|
DPRINTF(("audio_drain: enter busy=%d used=%d\n",
|
|
sc->sc_pbus, sc->sc_pr.used));
|
|
if (sc->sc_pr.mmapped || sc->sc_pr.used <= 0)
|
|
return 0;
|
|
if (!sc->sc_pbus) {
|
|
/* We've never started playing, probably because the
|
|
* block was too short. Pad it and start now.
|
|
*/
|
|
int cc;
|
|
u_char *inp = cb->inp;
|
|
|
|
cc = cb->blksize - (inp - cb->start) % cb->blksize;
|
|
audio_fill_silence(&sc->sc_pparams, inp, cc);
|
|
inp += cc;
|
|
if (inp >= cb->end)
|
|
inp = cb->start;
|
|
s = splaudio();
|
|
cb->used += cc;
|
|
cb->inp = inp;
|
|
error = audiostartp(sc);
|
|
splx(s);
|
|
if (error)
|
|
return error;
|
|
}
|
|
/*
|
|
* Play until a silence block has been played, then we
|
|
* know all has been drained.
|
|
* XXX This should be done some other way to avoid
|
|
* playing silence.
|
|
*/
|
|
#ifdef DIAGNOSTIC
|
|
if (cb->copying) {
|
|
printf("audio_drain: copying in progress!?!\n");
|
|
cb->copying = 0;
|
|
}
|
|
#endif
|
|
drops = cb->drops;
|
|
error = 0;
|
|
s = splaudio();
|
|
while (cb->drops == drops && !error) {
|
|
DPRINTF(("audio_drain: used=%d, drops=%ld\n",
|
|
sc->sc_pr.used, cb->drops));
|
|
/*
|
|
* When the process is exiting, it ignores all signals and
|
|
* we can't interrupt this sleep, so we set a timeout
|
|
* just in case.
|
|
*/
|
|
error = audio_sleep_timo(&sc->sc_wchan, "aud_dr", 30*hz);
|
|
if (sc->sc_dying)
|
|
error = EIO;
|
|
}
|
|
splx(s);
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Close an audio chip.
|
|
*/
|
|
/* ARGSUSED */
|
|
int
|
|
audio_close(struct audio_softc *sc, int flags, int ifmt, struct proc *p)
|
|
{
|
|
struct audio_hw_if *hw = sc->hw_if;
|
|
int s;
|
|
|
|
DPRINTF(("audio_close: sc=%p\n", sc));
|
|
|
|
s = splaudio();
|
|
/* Stop recording. */
|
|
if ((flags & FREAD) && sc->sc_rbus) {
|
|
/*
|
|
* XXX Some drivers (e.g. SB) use the same routine
|
|
* to halt input and output so don't halt input if
|
|
* in full duplex mode. These drivers should be fixed.
|
|
*/
|
|
if (!sc->sc_full_duplex ||
|
|
sc->hw_if->halt_input != sc->hw_if->halt_output)
|
|
sc->hw_if->halt_input(sc->hw_hdl);
|
|
sc->sc_rbus = 0;
|
|
}
|
|
/*
|
|
* Block until output drains, but allow ^C interrupt.
|
|
*/
|
|
sc->sc_pr.usedlow = sc->sc_pr.blksize; /* avoid excessive wakeups */
|
|
/*
|
|
* If there is pending output, let it drain (unless
|
|
* the output is paused).
|
|
*/
|
|
if ((flags & FWRITE) && sc->sc_pbus) {
|
|
if (!sc->sc_pr.pause && !audio_drain(sc) && hw->drain)
|
|
(void)hw->drain(sc->hw_hdl);
|
|
sc->hw_if->halt_output(sc->hw_hdl);
|
|
sc->sc_pbus = 0;
|
|
}
|
|
|
|
hw->close(sc->hw_hdl);
|
|
|
|
if (flags & FREAD) {
|
|
sc->sc_open &= ~AUOPEN_READ;
|
|
sc->sc_mode &= ~AUMODE_RECORD;
|
|
}
|
|
if (flags & FWRITE) {
|
|
sc->sc_open &= ~AUOPEN_WRITE;
|
|
sc->sc_mode &= ~(AUMODE_PLAY|AUMODE_PLAY_ALL);
|
|
}
|
|
|
|
sc->sc_async_audio = 0;
|
|
sc->sc_full_duplex = 0;
|
|
splx(s);
|
|
DPRINTF(("audio_close: done\n"));
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
audio_read(struct audio_softc *sc, struct uio *uio, int ioflag)
|
|
{
|
|
struct audio_ringbuffer *cb = &sc->sc_rr;
|
|
u_char *outp;
|
|
int error, s, used, cc, n;
|
|
const struct audio_params *params;
|
|
int hw_bits_per_sample;
|
|
|
|
if (cb->mmapped)
|
|
return EINVAL;
|
|
|
|
DPRINTFN(1,("audio_read: cc=%lu mode=%d\n",
|
|
(unsigned long)uio->uio_resid, sc->sc_mode));
|
|
|
|
params = &sc->sc_rparams;
|
|
switch (params->hw_encoding) {
|
|
case AUDIO_ENCODING_SLINEAR_LE:
|
|
case AUDIO_ENCODING_SLINEAR_BE:
|
|
case AUDIO_ENCODING_ULINEAR_LE:
|
|
case AUDIO_ENCODING_ULINEAR_BE:
|
|
hw_bits_per_sample = params->hw_channels * params->precision
|
|
* params->factor;
|
|
break;
|
|
default:
|
|
hw_bits_per_sample = 8 * params->factor / params->factor_denom;
|
|
}
|
|
error = 0;
|
|
/*
|
|
* If hardware is half-duplex and currently playing, return
|
|
* silence blocks based on the number of blocks we have output.
|
|
*/
|
|
if (!sc->sc_full_duplex &&
|
|
(sc->sc_mode & AUMODE_PLAY)) {
|
|
while (uio->uio_resid > 0 && !error) {
|
|
s = splaudio();
|
|
for(;;) {
|
|
cc = sc->sc_pr.stamp - sc->sc_wstamp;
|
|
if (cc > 0)
|
|
break;
|
|
DPRINTF(("audio_read: stamp=%lu, wstamp=%lu\n",
|
|
sc->sc_pr.stamp, sc->sc_wstamp));
|
|
if (ioflag & IO_NDELAY) {
|
|
splx(s);
|
|
return (EWOULDBLOCK);
|
|
}
|
|
error = audio_sleep(&sc->sc_rchan, "aud_hr");
|
|
if (sc->sc_dying)
|
|
error = EIO;
|
|
if (error) {
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
}
|
|
splx(s);
|
|
|
|
if (uio->uio_resid < cc)
|
|
cc = uio->uio_resid;
|
|
DPRINTFN(1,("audio_read: reading in write mode, "
|
|
"cc=%d\n", cc));
|
|
error = audio_silence_copyout(sc, cc, uio);
|
|
sc->sc_wstamp += cc;
|
|
}
|
|
return (error);
|
|
}
|
|
while (uio->uio_resid > 0 && !error) {
|
|
if (sc->sc_rconvbuffer_end - sc->sc_rconvbuffer_begin <= 0) {
|
|
s = splaudio();
|
|
while (cb->used * 8 < hw_bits_per_sample) {
|
|
if (!sc->sc_rbus) {
|
|
error = audiostartr(sc);
|
|
if (error) {
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
}
|
|
if (ioflag & IO_NDELAY) {
|
|
splx(s);
|
|
return (EWOULDBLOCK);
|
|
}
|
|
DPRINTFN(1, ("audio_read: sleep used=%d\n",
|
|
cb->used));
|
|
error = audio_sleep(&sc->sc_rchan, "aud_rd");
|
|
if (sc->sc_dying)
|
|
error = EIO;
|
|
if (error) {
|
|
splx(s);
|
|
return error;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Move data in the ring buffer to sc_rconvbuffer as
|
|
* possible with/without rate conversion.
|
|
*/
|
|
used = cb->used;
|
|
outp = cb->outp;
|
|
cb->copying = 1;
|
|
splx(s);
|
|
cc = used - cb->usedlow; /* maximum to read */
|
|
if (cc > sc->sc_rconvbuffer_size)
|
|
cc = sc->sc_rconvbuffer_size;
|
|
n = cc * params->factor / params->factor_denom;
|
|
if (n < cc)
|
|
cc = n;
|
|
/* cc must be aligned by the sample size */
|
|
cc = (cc * 8 / hw_bits_per_sample) * hw_bits_per_sample / 8;
|
|
#ifdef DIAGNOSTIC
|
|
if (cc == 0)
|
|
printf("audio_read: cc=0 hw_bits_per_sample=%d\n",
|
|
hw_bits_per_sample);
|
|
#endif
|
|
|
|
/*
|
|
* The format of data in the ring buffer is
|
|
* [hw_sample_rate, hw_encoding, hw_precision, hw_channels]
|
|
*/
|
|
#if NAURATECONV > 0
|
|
sc->sc_rconvbuffer_end =
|
|
auconv_record(&sc->sc_rconv, params,
|
|
sc->sc_rconvbuffer, outp, cc);
|
|
#else
|
|
n = cb->end - outp;
|
|
if (cc <= n) {
|
|
memcpy(sc->sc_rconvbuffer, outp, cc);
|
|
} else {
|
|
memcpy(sc->sc_rconvbuffer, outp, n);
|
|
memcpy(sc->sc_rconvbuffer + n, cb->start,
|
|
cc - n);
|
|
}
|
|
sc->sc_rconvbuffer_end = cc;
|
|
#endif /* !NAURATECONV */
|
|
/*
|
|
* The format of data in sc_rconvbuffer is
|
|
* [sample_rate, hw_encoding, hw_precision, channels]
|
|
*/
|
|
outp += cc;
|
|
if (outp >= cb->end)
|
|
outp -= cb->end - cb->start;
|
|
s = splaudio();
|
|
cb->outp = outp;
|
|
cb->used -= cc;
|
|
cb->copying = 0;
|
|
splx(s);
|
|
|
|
if (params->sw_code) {
|
|
cc = sc->sc_rconvbuffer_end;
|
|
#ifdef DIAGNOSTIC
|
|
if (cc % params->factor != 0)
|
|
printf("audio_read: cc is not aligned"
|
|
": cc=%d factor=%d\n", cc,
|
|
params->factor);
|
|
#endif
|
|
cc = cc * params->factor_denom / params->factor;
|
|
#ifdef DIAGNOSTIC
|
|
if (cc == 0)
|
|
printf("audio_read: cc=0 "
|
|
"factor=%d/%d\n",
|
|
params->factor,
|
|
params->factor_denom);
|
|
#endif
|
|
params->sw_code(sc->hw_hdl, sc->sc_rconvbuffer,
|
|
cc);
|
|
sc->sc_rconvbuffer_end = cc;
|
|
}
|
|
sc->sc_rconvbuffer_begin = 0;
|
|
/*
|
|
* The format of data in sc_rconvbuffer is
|
|
* [sample_rate, encoding, precision, channels]
|
|
*/
|
|
}
|
|
|
|
cc = sc->sc_rconvbuffer_end - sc->sc_rconvbuffer_begin;
|
|
if (uio->uio_resid < cc)
|
|
cc = uio->uio_resid; /* and no more than we want */
|
|
|
|
DPRINTFN(0,("audio_read: buffer=%p[%d] (~ %d), cc=%d\n",
|
|
sc->sc_rconvbuffer, sc->sc_rconvbuffer_begin,
|
|
sc->sc_rconvbuffer_end, cc));
|
|
n = uio->uio_resid;
|
|
error = uiomove(sc->sc_rconvbuffer + sc->sc_rconvbuffer_begin,
|
|
cc, uio);
|
|
cc = n - uio->uio_resid; /* number of bytes actually moved */
|
|
sc->sc_rconvbuffer_begin += cc;
|
|
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
void
|
|
audio_clear(struct audio_softc *sc)
|
|
{
|
|
int s = splaudio();
|
|
|
|
if (sc->sc_rbus) {
|
|
audio_wakeup(&sc->sc_rchan);
|
|
sc->hw_if->halt_input(sc->hw_hdl);
|
|
sc->sc_rbus = 0;
|
|
}
|
|
if (sc->sc_pbus) {
|
|
audio_wakeup(&sc->sc_wchan);
|
|
sc->hw_if->halt_output(sc->hw_hdl);
|
|
sc->sc_pbus = 0;
|
|
}
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
audio_calc_blksize(struct audio_softc *sc, int mode)
|
|
{
|
|
struct audio_hw_if *hw = sc->hw_if;
|
|
struct audio_params *parm;
|
|
struct audio_ringbuffer *rb;
|
|
int bs;
|
|
|
|
if (sc->sc_blkset)
|
|
return;
|
|
|
|
if (mode == AUMODE_PLAY) {
|
|
parm = &sc->sc_pparams;
|
|
rb = &sc->sc_pr;
|
|
} else {
|
|
parm = &sc->sc_rparams;
|
|
rb = &sc->sc_rr;
|
|
}
|
|
|
|
bs = parm->hw_sample_rate * audio_blk_ms / 1000 *
|
|
parm->hw_channels * parm->precision / NBBY *
|
|
parm->factor;
|
|
ROUNDSIZE(bs);
|
|
if (hw->round_blocksize)
|
|
bs = hw->round_blocksize(sc->hw_hdl, bs);
|
|
/*
|
|
* The blocksize should never be 0, but a faulty
|
|
* driver might set it wrong. Just use something.
|
|
*/
|
|
if (bs <= 0)
|
|
bs = 512;
|
|
rb->blksize = bs;
|
|
|
|
DPRINTF(("audio_calc_blksize: %s blksize=%d\n",
|
|
mode == AUMODE_PLAY ? "play" : "record", bs));
|
|
}
|
|
|
|
void
|
|
audio_fill_silence(struct audio_params *params, u_char *p, int n)
|
|
{
|
|
u_char auzero0, auzero1 = 0; /* initialize to please gcc */
|
|
int nfill = 1;
|
|
|
|
switch (params->hw_encoding) {
|
|
case AUDIO_ENCODING_ULAW:
|
|
auzero0 = 0x7f;
|
|
break;
|
|
case AUDIO_ENCODING_ALAW:
|
|
auzero0 = 0x55;
|
|
break;
|
|
case AUDIO_ENCODING_MPEG_L1_STREAM:
|
|
case AUDIO_ENCODING_MPEG_L1_PACKETS:
|
|
case AUDIO_ENCODING_MPEG_L1_SYSTEM:
|
|
case AUDIO_ENCODING_MPEG_L2_STREAM:
|
|
case AUDIO_ENCODING_MPEG_L2_PACKETS:
|
|
case AUDIO_ENCODING_MPEG_L2_SYSTEM:
|
|
case AUDIO_ENCODING_ADPCM: /* is this right XXX */
|
|
case AUDIO_ENCODING_SLINEAR_LE:
|
|
case AUDIO_ENCODING_SLINEAR_BE:
|
|
auzero0 = 0;/* fortunately this works for any number of bits */
|
|
break;
|
|
case AUDIO_ENCODING_ULINEAR_LE:
|
|
case AUDIO_ENCODING_ULINEAR_BE:
|
|
if (params->hw_precision > 8) {
|
|
nfill = (params->hw_precision + NBBY - 1)/ NBBY;
|
|
auzero0 = 0x80;
|
|
auzero1 = 0;
|
|
} else
|
|
auzero0 = 0x80;
|
|
break;
|
|
default:
|
|
DPRINTF(("audio: bad encoding %d\n", params->encoding));
|
|
auzero0 = 0;
|
|
break;
|
|
}
|
|
if (nfill == 1) {
|
|
while (--n >= 0)
|
|
*p++ = auzero0; /* XXX memset */
|
|
} else /* nfill must no longer be 2 */ {
|
|
if (params->hw_encoding == AUDIO_ENCODING_ULINEAR_LE) {
|
|
int k = nfill;
|
|
while (--k > 0)
|
|
*p++ = auzero1;
|
|
n -= nfill - 1;
|
|
}
|
|
while (n >= nfill) {
|
|
int k;
|
|
*p++ = auzero0;
|
|
while (--k > 0)
|
|
*p++ = auzero1;
|
|
|
|
n -= nfill;
|
|
}
|
|
if (n-- > 0) /* XXX must be 1 - DIAGNOSTIC check? */
|
|
*p++ = auzero0;
|
|
}
|
|
}
|
|
|
|
int
|
|
audio_silence_copyout(struct audio_softc *sc, int n, struct uio *uio)
|
|
{
|
|
int error;
|
|
int k;
|
|
u_char zerobuf[128];
|
|
|
|
audio_fill_silence(&sc->sc_rparams, zerobuf, sizeof zerobuf);
|
|
|
|
error = 0;
|
|
while (n > 0 && uio->uio_resid > 0 && !error) {
|
|
k = min(n, min(uio->uio_resid, sizeof zerobuf));
|
|
error = uiomove(zerobuf, k, uio);
|
|
n -= k;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
audio_write(struct audio_softc *sc, struct uio *uio, int ioflag)
|
|
{
|
|
struct audio_ringbuffer *cb = &sc->sc_pr;
|
|
u_char *inp, *einp;
|
|
int saveerror, error, s, n, cc, used;
|
|
struct audio_params *params;
|
|
int samples, hw_bits_per_sample, user_bits_per_sample;
|
|
int input_remain, space;
|
|
|
|
DPRINTFN(2,("audio_write: sc=%p count=%lu used=%d(hi=%d)\n",
|
|
sc, (unsigned long)uio->uio_resid, sc->sc_pr.used,
|
|
sc->sc_pr.usedhigh));
|
|
|
|
if (cb->mmapped)
|
|
return EINVAL;
|
|
|
|
if (uio->uio_resid == 0) {
|
|
sc->sc_eof++;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If half-duplex and currently recording, throw away data.
|
|
*/
|
|
if (!sc->sc_full_duplex &&
|
|
(sc->sc_mode & AUMODE_RECORD)) {
|
|
uio->uio_offset += uio->uio_resid;
|
|
uio->uio_resid = 0;
|
|
DPRINTF(("audio_write: half-dpx read busy\n"));
|
|
return (0);
|
|
}
|
|
|
|
if (!(sc->sc_mode & AUMODE_PLAY_ALL) && sc->sc_playdrop > 0) {
|
|
n = min(sc->sc_playdrop, uio->uio_resid);
|
|
DPRINTF(("audio_write: playdrop %d\n", n));
|
|
uio->uio_offset += n;
|
|
uio->uio_resid -= n;
|
|
sc->sc_playdrop -= n;
|
|
if (uio->uio_resid == 0)
|
|
return 0;
|
|
}
|
|
|
|
params = &sc->sc_pparams;
|
|
DPRINTFN(1, ("audio_write: sr=%ld, enc=%d, prec=%d, chan=%d, sw=%p, "
|
|
"fact=%d\n",
|
|
sc->sc_pparams.sample_rate, sc->sc_pparams.encoding,
|
|
sc->sc_pparams.precision, sc->sc_pparams.channels,
|
|
sc->sc_pparams.sw_code, sc->sc_pparams.factor));
|
|
|
|
/*
|
|
* For some encodings, handle data in sample unit.
|
|
*/
|
|
switch (params->hw_encoding) {
|
|
case AUDIO_ENCODING_SLINEAR_LE:
|
|
case AUDIO_ENCODING_SLINEAR_BE:
|
|
case AUDIO_ENCODING_ULINEAR_LE:
|
|
case AUDIO_ENCODING_ULINEAR_BE:
|
|
hw_bits_per_sample = params->hw_channels * params->precision
|
|
* params->factor;
|
|
user_bits_per_sample = params->channels * params->precision;
|
|
break;
|
|
default:
|
|
hw_bits_per_sample = 8 * params->factor / params->factor_denom;
|
|
user_bits_per_sample = 8;
|
|
}
|
|
#ifdef DIAGNOSTIC
|
|
if (hw_bits_per_sample > MAX_SAMPLE_SIZE * 8) {
|
|
printf("audio_write(): Invalid sample size: cur=%d max=%d\n",
|
|
hw_bits_per_sample / 8, MAX_SAMPLE_SIZE);
|
|
}
|
|
#endif
|
|
space = ((params->hw_sample_rate / params->sample_rate) + 1)
|
|
* hw_bits_per_sample / 8;
|
|
error = 0;
|
|
while ((input_remain = uio->uio_resid + sc->sc_input_fragment_length) > 0
|
|
&& !error) {
|
|
s = splaudio();
|
|
if (input_remain < user_bits_per_sample / 8) {
|
|
n = uio->uio_resid;
|
|
DPRINTF(("audio_write: fragment uiomove length=%d\n", n));
|
|
error = uiomove(sc->sc_input_fragment
|
|
+ sc->sc_input_fragment_length,
|
|
n, uio);
|
|
if (!error)
|
|
sc->sc_input_fragment_length += n;
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
while (cb->used + space >= cb->usedhigh) {
|
|
DPRINTFN(2, ("audio_write: sleep used=%d lowat=%d "
|
|
"hiwat=%d\n",
|
|
cb->used, cb->usedlow, cb->usedhigh));
|
|
if (ioflag & IO_NDELAY) {
|
|
splx(s);
|
|
return (EWOULDBLOCK);
|
|
}
|
|
error = audio_sleep(&sc->sc_wchan, "aud_wr");
|
|
if (sc->sc_dying)
|
|
error = EIO;
|
|
if (error) {
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
}
|
|
used = cb->used;
|
|
inp = cb->inp;
|
|
cb->copying = 1;
|
|
splx(s);
|
|
cc = cb->usedhigh - used; /* maximum to write */
|
|
/* cc may be greater than the size of the ring buffer */
|
|
if (cc > cb->end - cb->start)
|
|
cc = cb->end - cb->start;
|
|
|
|
/* cc: # of bytes we can write to the ring buffer */
|
|
samples = cc * 8 / hw_bits_per_sample;
|
|
#ifdef DIAGNOSTIC
|
|
if (samples == 0)
|
|
printf("audio_write: samples (cc/hw_bps) == 0\n");
|
|
#endif
|
|
/* samples: # of samples we can write to the ring buffer */
|
|
samples = samples * params->sample_rate / params->hw_sample_rate;
|
|
#ifdef DIAGNOSTIC
|
|
if (samples == 0)
|
|
printf("audio_write: samples (rate/hw_rate) == 0 "
|
|
"usedhigh-used=%d cc/hw_bps=%d/%d "
|
|
"rate/hw_rate=%ld/%ld space=%d\n",
|
|
cb->usedhigh - cb->used, cc,
|
|
hw_bits_per_sample / 8, params->sample_rate,
|
|
params->hw_sample_rate, space);
|
|
#endif
|
|
/* samples: # of samples in source data */
|
|
cc = samples * user_bits_per_sample / 8;
|
|
/* cc: # of bytes in source data */
|
|
if (input_remain < cc) /* and no more than we have */
|
|
cc = (input_remain * 8 / user_bits_per_sample)
|
|
* user_bits_per_sample / 8;
|
|
#ifdef DIAGNOSTIC
|
|
if (cc == 0)
|
|
printf("audio_write: cc == 0\n");
|
|
#endif
|
|
if (cc * params->factor / params->factor_denom
|
|
> sc->sc_pconvbuffer_size) {
|
|
/*
|
|
* cc = (pconv / factor / user_bps ) * user_bps
|
|
*/
|
|
cc = (sc->sc_pconvbuffer_size * params->factor_denom
|
|
* 8 / params->factor / user_bits_per_sample)
|
|
* user_bits_per_sample / 8;
|
|
}
|
|
|
|
#ifdef DIAGNOSTIC
|
|
/*
|
|
* This should never happen since the block size and and
|
|
* block pointers are always nicely aligned.
|
|
*/
|
|
if (cc == 0) {
|
|
printf("audio_write: cc == 0, swcode=%p, factor=%d "
|
|
"remain=%d u_bps=%d hw_bps=%d\n",
|
|
sc->sc_pparams.sw_code, sc->sc_pparams.factor,
|
|
input_remain, user_bits_per_sample,
|
|
hw_bits_per_sample);
|
|
cb->copying = 0;
|
|
return EINVAL;
|
|
}
|
|
#endif
|
|
DPRINTFN(1, ("audio_write: uiomove cc=%d inp=%p, left=%lu\n",
|
|
cc, inp, (unsigned long)uio->uio_resid));
|
|
memcpy(sc->sc_pconvbuffer, sc->sc_input_fragment,
|
|
sc->sc_input_fragment_length);
|
|
cc -= sc->sc_input_fragment_length;
|
|
n = uio->uio_resid;
|
|
error = uiomove(sc->sc_pconvbuffer + sc->sc_input_fragment_length,
|
|
cc, uio);
|
|
if (cc != n - uio->uio_resid) {
|
|
printf("audio_write: uiomove didn't move requested "
|
|
"amount: requested=%d, actual=%ld\n",
|
|
cc, (long)n - uio->uio_resid);
|
|
}
|
|
/* number of bytes actually moved */
|
|
cc = sc->sc_input_fragment_length + n - uio->uio_resid;
|
|
sc->sc_input_fragment_length = 0;
|
|
#ifdef AUDIO_DEBUG
|
|
if (error)
|
|
printf("audio_write:(1) uiomove failed %d; cc=%d "
|
|
"inp=%p\n", error, cc, inp);
|
|
#endif
|
|
/*
|
|
* Continue even if uiomove() failed because we may have
|
|
* gotten a partial block.
|
|
*/
|
|
|
|
/*
|
|
* The format of data in sc_pconvbuffer is:
|
|
* [sample_rate, encoding, precision, channels]
|
|
*/
|
|
if (sc->sc_pparams.sw_code) {
|
|
sc->sc_pparams.sw_code(sc->hw_hdl,
|
|
sc->sc_pconvbuffer, cc);
|
|
/* Adjust count after the expansion. */
|
|
cc = cc * sc->sc_pparams.factor
|
|
/ sc->sc_pparams.factor_denom;
|
|
DPRINTFN(1, ("audio_write: expanded cc=%d\n", cc));
|
|
}
|
|
/*
|
|
* The format of data in sc_pconvbuffer is:
|
|
* [sample_rate, hw_encoding, hw_precision, channels]
|
|
*/
|
|
#if NAURATECONV > 0
|
|
cc = auconv_play(&sc->sc_pconv, params, inp,
|
|
sc->sc_pconvbuffer, cc);
|
|
#else
|
|
n = cb->end - inp;
|
|
if (cc <= n) {
|
|
memcpy(inp, sc->sc_pconvbuffer, cc);
|
|
} else {
|
|
memcpy(inp, sc->sc_pconvbuffer, n);
|
|
memcpy(cb->start, sc->sc_pconvbuffer + n, cc - n);
|
|
}
|
|
#endif /* !NAURATECONV */
|
|
/*
|
|
* The format of data in inp is:
|
|
* [hw_sample_rate, hw_encoding, hw_precision, hw_channels]
|
|
* cc is the size of data actually written to inp.
|
|
*/
|
|
|
|
einp = cb->inp + cc;
|
|
if (einp >= cb->end)
|
|
einp -= cb->end - cb->start; /* not cb->bufsize */
|
|
|
|
s = splaudio();
|
|
/*
|
|
* This is a very suboptimal way of keeping track of
|
|
* silence in the buffer, but it is simple.
|
|
*/
|
|
sc->sc_sil_count = 0;
|
|
|
|
cb->inp = einp;
|
|
cb->used += cc;
|
|
/*
|
|
* If the interrupt routine wants the last block filled AND
|
|
* the copy did not fill the last block completely it needs to
|
|
* be padded.
|
|
*/
|
|
if (cb->needfill &&
|
|
(inp - cb->start) / cb->blksize ==
|
|
(einp - cb->start) / cb->blksize) {
|
|
/* Figure out how many bytes to a block boundary. */
|
|
cc = cb->blksize - (einp - cb->start) % cb->blksize;
|
|
DPRINTF(("audio_write: partial fill %d\n", cc));
|
|
} else
|
|
cc = 0;
|
|
cb->needfill = 0;
|
|
cb->copying = 0;
|
|
if (!sc->sc_pbus && !cb->pause) {
|
|
saveerror = error;
|
|
error = audiostartp(sc);
|
|
if (saveerror != 0) {
|
|
/* Report the first error that occurred. */
|
|
error = saveerror;
|
|
}
|
|
}
|
|
splx(s);
|
|
if (cc != 0) {
|
|
DPRINTFN(1, ("audio_write: fill %d\n", cc));
|
|
audio_fill_silence(&sc->sc_pparams, einp, cc);
|
|
}
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
audio_ioctl(struct audio_softc *sc, u_long cmd, caddr_t addr, int flag,
|
|
struct proc *p)
|
|
{
|
|
struct audio_hw_if *hw = sc->hw_if;
|
|
struct audio_offset *ao;
|
|
int error = 0, s, offs, fd;
|
|
int rbus, pbus;
|
|
|
|
DPRINTF(("audio_ioctl(%lu,'%c',%lu)\n",
|
|
IOCPARM_LEN(cmd), (char)IOCGROUP(cmd), cmd&0xff));
|
|
switch (cmd) {
|
|
case FIONBIO:
|
|
/* All handled in the upper FS layer. */
|
|
break;
|
|
|
|
case FIOASYNC:
|
|
if (*(int *)addr) {
|
|
if (sc->sc_async_audio)
|
|
return (EBUSY);
|
|
sc->sc_async_audio = p;
|
|
DPRINTF(("audio_ioctl: FIOASYNC %p\n", p));
|
|
} else
|
|
sc->sc_async_audio = 0;
|
|
break;
|
|
|
|
case AUDIO_FLUSH:
|
|
DPRINTF(("AUDIO_FLUSH\n"));
|
|
rbus = sc->sc_rbus;
|
|
pbus = sc->sc_pbus;
|
|
audio_clear(sc);
|
|
s = splaudio();
|
|
error = audio_initbufs(sc);
|
|
if (error) {
|
|
splx(s);
|
|
return error;
|
|
}
|
|
if ((sc->sc_mode & AUMODE_PLAY) && !sc->sc_pbus && pbus)
|
|
error = audiostartp(sc);
|
|
if (!error &&
|
|
(sc->sc_mode & AUMODE_RECORD) && !sc->sc_rbus && rbus)
|
|
error = audiostartr(sc);
|
|
splx(s);
|
|
break;
|
|
|
|
/*
|
|
* Number of read (write) samples dropped. We don't know where or
|
|
* when they were dropped.
|
|
*/
|
|
case AUDIO_RERROR:
|
|
*(int *)addr = sc->sc_rr.drops;
|
|
break;
|
|
|
|
case AUDIO_PERROR:
|
|
*(int *)addr = sc->sc_pr.drops;
|
|
break;
|
|
|
|
/*
|
|
* Offsets into buffer.
|
|
*/
|
|
case AUDIO_GETIOFFS:
|
|
s = splaudio();
|
|
/* figure out where next DMA will start */
|
|
ao = (struct audio_offset *)addr;
|
|
ao->samples = sc->sc_rr.stamp;
|
|
ao->deltablks =
|
|
(sc->sc_rr.stamp - sc->sc_rr.stamp_last) / sc->sc_rr.blksize;
|
|
sc->sc_rr.stamp_last = sc->sc_rr.stamp;
|
|
ao->offset = sc->sc_rr.inp - sc->sc_rr.start;
|
|
splx(s);
|
|
break;
|
|
|
|
case AUDIO_GETOOFFS:
|
|
s = splaudio();
|
|
/* figure out where next DMA will start */
|
|
ao = (struct audio_offset *)addr;
|
|
offs = sc->sc_pr.outp - sc->sc_pr.start + sc->sc_pr.blksize;
|
|
if (sc->sc_pr.start + offs >= sc->sc_pr.end)
|
|
offs = 0;
|
|
ao->samples = sc->sc_pr.stamp;
|
|
ao->deltablks =
|
|
(sc->sc_pr.stamp - sc->sc_pr.stamp_last) / sc->sc_pr.blksize;
|
|
sc->sc_pr.stamp_last = sc->sc_pr.stamp;
|
|
ao->offset = offs;
|
|
splx(s);
|
|
break;
|
|
|
|
/*
|
|
* How many bytes will elapse until mike hears the first
|
|
* sample of what we write next?
|
|
*/
|
|
case AUDIO_WSEEK:
|
|
*(u_long *)addr = sc->sc_rr.used;
|
|
break;
|
|
|
|
case AUDIO_SETINFO:
|
|
DPRINTF(("AUDIO_SETINFO mode=0x%x\n", sc->sc_mode));
|
|
error = audiosetinfo(sc, (struct audio_info *)addr);
|
|
break;
|
|
|
|
case AUDIO_GETINFO:
|
|
DPRINTF(("AUDIO_GETINFO\n"));
|
|
error = audiogetinfo(sc, (struct audio_info *)addr);
|
|
break;
|
|
|
|
case AUDIO_DRAIN:
|
|
DPRINTF(("AUDIO_DRAIN\n"));
|
|
error = audio_drain(sc);
|
|
if (!error && hw->drain)
|
|
error = hw->drain(sc->hw_hdl);
|
|
break;
|
|
|
|
case AUDIO_GETDEV:
|
|
DPRINTF(("AUDIO_GETDEV\n"));
|
|
error = hw->getdev(sc->hw_hdl, (audio_device_t *)addr);
|
|
break;
|
|
|
|
case AUDIO_GETENC:
|
|
DPRINTF(("AUDIO_GETENC\n"));
|
|
error =
|
|
hw->query_encoding(sc->hw_hdl, (struct audio_encoding *)addr);
|
|
break;
|
|
|
|
case AUDIO_GETFD:
|
|
DPRINTF(("AUDIO_GETFD\n"));
|
|
*(int *)addr = sc->sc_full_duplex;
|
|
break;
|
|
|
|
case AUDIO_SETFD:
|
|
DPRINTF(("AUDIO_SETFD\n"));
|
|
fd = *(int *)addr;
|
|
if (hw->get_props(sc->hw_hdl) & AUDIO_PROP_FULLDUPLEX) {
|
|
if (hw->setfd)
|
|
error = hw->setfd(sc->hw_hdl, fd);
|
|
else
|
|
error = 0;
|
|
if (!error)
|
|
sc->sc_full_duplex = fd;
|
|
} else {
|
|
if (fd)
|
|
error = ENOTTY;
|
|
else
|
|
error = 0;
|
|
}
|
|
break;
|
|
|
|
case AUDIO_GETPROPS:
|
|
DPRINTF(("AUDIO_GETPROPS\n"));
|
|
*(int *)addr = hw->get_props(sc->hw_hdl);
|
|
break;
|
|
|
|
default:
|
|
if (hw->dev_ioctl) {
|
|
error = hw->dev_ioctl(sc->hw_hdl, cmd, addr, flag, p);
|
|
} else {
|
|
DPRINTF(("audio_ioctl: unknown ioctl\n"));
|
|
error = EINVAL;
|
|
}
|
|
break;
|
|
}
|
|
DPRINTF(("audio_ioctl(%lu,'%c',%lu) result %d\n",
|
|
IOCPARM_LEN(cmd), (char)IOCGROUP(cmd), cmd&0xff, error));
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
audio_poll(struct audio_softc *sc, int events, struct proc *p)
|
|
{
|
|
int revents = 0;
|
|
int s = splaudio();
|
|
|
|
DPRINTF(("audio_poll: events=0x%x mode=%d\n", events, sc->sc_mode));
|
|
|
|
if (events & (POLLIN | POLLRDNORM))
|
|
/*
|
|
* If half duplex and playing, audio_read() will generate
|
|
* silence at the play rate; poll for silence being
|
|
* available. Otherwise, poll for recorded sound.
|
|
*/
|
|
if ((!sc->sc_full_duplex && (sc->sc_mode & AUMODE_PLAY)) ?
|
|
sc->sc_pr.stamp > sc->sc_wstamp :
|
|
sc->sc_rr.used > sc->sc_rr.usedlow)
|
|
revents |= events & (POLLIN | POLLRDNORM);
|
|
|
|
if (events & (POLLOUT | POLLWRNORM))
|
|
/*
|
|
* If half duplex and recording, audio_write() will throw
|
|
* away play data, which means we are always ready to write.
|
|
* Otherwise, poll for play buffer being below its low water
|
|
* mark.
|
|
*/
|
|
if ((!sc->sc_full_duplex && (sc->sc_mode & AUMODE_RECORD)) ||
|
|
sc->sc_pr.used <= sc->sc_pr.usedlow)
|
|
revents |= events & (POLLOUT | POLLWRNORM);
|
|
|
|
if (revents == 0) {
|
|
if (events & (POLLIN | POLLRDNORM))
|
|
selrecord(p, &sc->sc_rsel);
|
|
|
|
if (events & (POLLOUT | POLLWRNORM))
|
|
selrecord(p, &sc->sc_wsel);
|
|
}
|
|
|
|
splx(s);
|
|
return (revents);
|
|
}
|
|
|
|
paddr_t
|
|
audio_mmap(struct audio_softc *sc, off_t off, int prot)
|
|
{
|
|
struct audio_hw_if *hw = sc->hw_if;
|
|
struct audio_ringbuffer *cb;
|
|
int s;
|
|
|
|
DPRINTF(("audio_mmap: off=%lld, prot=%d\n", (long long)off, prot));
|
|
|
|
if (!(hw->get_props(sc->hw_hdl) & AUDIO_PROP_MMAP) || !hw->mappage)
|
|
return -1;
|
|
#if 0
|
|
/* XXX
|
|
* The idea here was to use the protection to determine if
|
|
* we are mapping the read or write buffer, but it fails.
|
|
* The VM system is broken in (at least) two ways.
|
|
* 1) If you map memory VM_PROT_WRITE you SIGSEGV
|
|
* when writing to it, so VM_PROT_READ|VM_PROT_WRITE
|
|
* has to be used for mmapping the play buffer.
|
|
* 2) Even if calling mmap() with VM_PROT_READ|VM_PROT_WRITE
|
|
* audio_mmap will get called at some point with VM_PROT_READ
|
|
* only.
|
|
* So, alas, we always map the play buffer for now.
|
|
*/
|
|
if (prot == (VM_PROT_READ|VM_PROT_WRITE) ||
|
|
prot == VM_PROT_WRITE)
|
|
cb = &sc->sc_pr;
|
|
else if (prot == VM_PROT_READ)
|
|
cb = &sc->sc_rr;
|
|
else
|
|
return -1;
|
|
#else
|
|
cb = &sc->sc_pr;
|
|
#endif
|
|
|
|
if ((u_int)off >= cb->bufsize)
|
|
return -1;
|
|
if (!cb->mmapped) {
|
|
cb->mmapped = 1;
|
|
if (cb == &sc->sc_pr) {
|
|
audio_fill_silence(&sc->sc_pparams, cb->start,
|
|
cb->bufsize);
|
|
s = splaudio();
|
|
if (!sc->sc_pbus)
|
|
(void)audiostartp(sc);
|
|
splx(s);
|
|
} else {
|
|
s = splaudio();
|
|
if (!sc->sc_rbus)
|
|
(void)audiostartr(sc);
|
|
splx(s);
|
|
}
|
|
}
|
|
|
|
return hw->mappage(sc->hw_hdl, cb->start, off, prot);
|
|
}
|
|
|
|
int
|
|
audiostartr(struct audio_softc *sc)
|
|
{
|
|
int error;
|
|
|
|
DPRINTF(("audiostartr: start=%p used=%d(hi=%d) mmapped=%d\n",
|
|
sc->sc_rr.start, sc->sc_rr.used, sc->sc_rr.usedhigh,
|
|
sc->sc_rr.mmapped));
|
|
|
|
if (sc->hw_if->trigger_input)
|
|
error = sc->hw_if->trigger_input(sc->hw_hdl, sc->sc_rr.start,
|
|
sc->sc_rr.end, sc->sc_rr.blksize,
|
|
audio_rint, (void *)sc, &sc->sc_rparams);
|
|
else
|
|
error = sc->hw_if->start_input(sc->hw_hdl, sc->sc_rr.start,
|
|
sc->sc_rr.blksize, audio_rint, (void *)sc);
|
|
if (error) {
|
|
DPRINTF(("audiostartr failed: %d\n", error));
|
|
return error;
|
|
}
|
|
sc->sc_rbus = 1;
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
audiostartp(struct audio_softc *sc)
|
|
{
|
|
int error;
|
|
|
|
DPRINTF(("audiostartp: start=%p used=%d(hi=%d) mmapped=%d\n",
|
|
sc->sc_pr.start, sc->sc_pr.used, sc->sc_pr.usedhigh,
|
|
sc->sc_pr.mmapped));
|
|
|
|
if (!sc->sc_pr.mmapped && sc->sc_pr.used < sc->sc_pr.blksize)
|
|
return 0;
|
|
|
|
if (sc->hw_if->trigger_output)
|
|
error = sc->hw_if->trigger_output(sc->hw_hdl, sc->sc_pr.start,
|
|
sc->sc_pr.end, sc->sc_pr.blksize,
|
|
audio_pint, (void *)sc, &sc->sc_pparams);
|
|
else
|
|
error = sc->hw_if->start_output(sc->hw_hdl, sc->sc_pr.outp,
|
|
sc->sc_pr.blksize, audio_pint, (void *)sc);
|
|
if (error) {
|
|
DPRINTF(("audiostartp failed: %d\n", error));
|
|
return error;
|
|
}
|
|
sc->sc_pbus = 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* When the play interrupt routine finds that the write isn't keeping
|
|
* the buffer filled it will insert silence in the buffer to make up
|
|
* for this. The part of the buffer that is filled with silence
|
|
* is kept track of in a very approximate way: it starts at sc_sil_start
|
|
* and extends sc_sil_count bytes. If there is already silence in
|
|
* the requested area nothing is done; so when the whole buffer is
|
|
* silent nothing happens. When the writer starts again sc_sil_count
|
|
* is set to 0.
|
|
*/
|
|
/* XXX
|
|
* Putting silence into the output buffer should not really be done
|
|
* at splaudio, but there is no softaudio level to do it at yet.
|
|
*/
|
|
static __inline void
|
|
audio_pint_silence(struct audio_softc *sc, struct audio_ringbuffer *cb,
|
|
u_char *inp, int cc)
|
|
{
|
|
u_char *s, *e, *p, *q;
|
|
|
|
if (sc->sc_sil_count > 0) {
|
|
s = sc->sc_sil_start; /* start of silence */
|
|
e = s + sc->sc_sil_count; /* end of sil., may be beyond end */
|
|
p = inp; /* adjusted pointer to area to fill */
|
|
if (p < s)
|
|
p += cb->end - cb->start;
|
|
q = p+cc;
|
|
/* Check if there is already silence. */
|
|
if (!(s <= p && p < e &&
|
|
s <= q && q <= e)) {
|
|
if (s <= p)
|
|
sc->sc_sil_count = max(sc->sc_sil_count, q-s);
|
|
DPRINTFN(5,("audio_pint_silence: fill cc=%d inp=%p, "
|
|
"count=%d size=%d\n",
|
|
cc, inp, sc->sc_sil_count,
|
|
(int)(cb->end - cb->start)));
|
|
audio_fill_silence(&sc->sc_pparams, inp, cc);
|
|
} else {
|
|
DPRINTFN(5,("audio_pint_silence: already silent "
|
|
"cc=%d inp=%p\n", cc, inp));
|
|
|
|
}
|
|
} else {
|
|
sc->sc_sil_start = inp;
|
|
sc->sc_sil_count = cc;
|
|
DPRINTFN(5, ("audio_pint_silence: start fill %p %d\n",
|
|
inp, cc));
|
|
audio_fill_silence(&sc->sc_pparams, inp, cc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Called from HW driver module on completion of dma output.
|
|
* Start output of new block, wrap in ring buffer if needed.
|
|
* If no more buffers to play, output zero instead.
|
|
* Do a wakeup if necessary.
|
|
*/
|
|
void
|
|
audio_pint(void *v)
|
|
{
|
|
struct audio_softc *sc = v;
|
|
struct audio_hw_if *hw = sc->hw_if;
|
|
struct audio_ringbuffer *cb = &sc->sc_pr;
|
|
u_char *inp;
|
|
int cc, ccr;
|
|
int blksize;
|
|
int error;
|
|
|
|
if (!sc->sc_open)
|
|
return; /* ignore interrupt if not open */
|
|
|
|
blksize = cb->blksize;
|
|
|
|
cb->outp += blksize;
|
|
if (cb->outp >= cb->end)
|
|
cb->outp = cb->start;
|
|
cb->stamp += blksize / sc->sc_pparams.factor;
|
|
if (cb->mmapped) {
|
|
DPRINTFN(5, ("audio_pint: mmapped outp=%p cc=%d inp=%p\n",
|
|
cb->outp, blksize, cb->inp));
|
|
if (!hw->trigger_output)
|
|
(void)hw->start_output(sc->hw_hdl, cb->outp,
|
|
blksize, audio_pint, (void *)sc);
|
|
return;
|
|
}
|
|
|
|
#ifdef AUDIO_INTR_TIME
|
|
{
|
|
struct timeval tv;
|
|
u_long t;
|
|
microtime(&tv);
|
|
t = tv.tv_usec + 1000000 * tv.tv_sec;
|
|
if (sc->sc_pnintr) {
|
|
long lastdelta, totdelta;
|
|
lastdelta = t - sc->sc_plastintr - sc->sc_pblktime;
|
|
if (lastdelta > sc->sc_pblktime / 3) {
|
|
printf("audio: play interrupt(%d) off "
|
|
"relative by %ld us (%lu)\n",
|
|
sc->sc_pnintr, lastdelta,
|
|
sc->sc_pblktime);
|
|
}
|
|
totdelta = t - sc->sc_pfirstintr -
|
|
sc->sc_pblktime * sc->sc_pnintr;
|
|
if (totdelta > sc->sc_pblktime) {
|
|
printf("audio: play interrupt(%d) off "
|
|
"absolute by %ld us (%lu) (LOST)\n",
|
|
sc->sc_pnintr, totdelta,
|
|
sc->sc_pblktime);
|
|
sc->sc_pnintr++; /* avoid repeated messages */
|
|
}
|
|
} else
|
|
sc->sc_pfirstintr = t;
|
|
sc->sc_plastintr = t;
|
|
sc->sc_pnintr++;
|
|
}
|
|
#endif
|
|
|
|
cb->used -= blksize;
|
|
if (cb->used < blksize) {
|
|
/* we don't have a full block to use */
|
|
if (cb->copying) {
|
|
/* writer is in progress, don't disturb */
|
|
cb->needfill = 1;
|
|
DPRINTFN(1, ("audio_pint: copying in progress\n"));
|
|
} else {
|
|
inp = cb->inp;
|
|
cc = blksize - (inp - cb->start) % blksize;
|
|
ccr = cc / sc->sc_pparams.factor;
|
|
if (cb->pause)
|
|
cb->pdrops += ccr;
|
|
else {
|
|
cb->drops += ccr;
|
|
sc->sc_playdrop += ccr;
|
|
}
|
|
audio_pint_silence(sc, cb, inp, cc);
|
|
inp += cc;
|
|
if (inp >= cb->end)
|
|
inp = cb->start;
|
|
cb->inp = inp;
|
|
cb->used += cc;
|
|
|
|
/* Clear next block so we keep ahead of the DMA. */
|
|
if (cb->used + cc < cb->usedhigh)
|
|
audio_pint_silence(sc, cb, inp, blksize);
|
|
}
|
|
}
|
|
|
|
DPRINTFN(5, ("audio_pint: outp=%p cc=%d\n", cb->outp, blksize));
|
|
if (!hw->trigger_output) {
|
|
error = hw->start_output(sc->hw_hdl, cb->outp, blksize,
|
|
audio_pint, (void *)sc);
|
|
if (error) {
|
|
/* XXX does this really help? */
|
|
DPRINTF(("audio_pint restart failed: %d\n", error));
|
|
audio_clear(sc);
|
|
}
|
|
}
|
|
|
|
DPRINTFN(2, ("audio_pint: mode=%d pause=%d used=%d lowat=%d\n",
|
|
sc->sc_mode, cb->pause, cb->used, cb->usedlow));
|
|
if ((sc->sc_mode & AUMODE_PLAY) && !cb->pause) {
|
|
if (cb->used <= cb->usedlow) {
|
|
audio_wakeup(&sc->sc_wchan);
|
|
selwakeup(&sc->sc_wsel);
|
|
if (sc->sc_async_audio) {
|
|
DPRINTFN(3, ("audio_pint: sending SIGIO %p\n",
|
|
sc->sc_async_audio));
|
|
psignal(sc->sc_async_audio, SIGIO);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Possible to return one or more "phantom blocks" now. */
|
|
if (!sc->sc_full_duplex && sc->sc_rchan) {
|
|
audio_wakeup(&sc->sc_rchan);
|
|
selwakeup(&sc->sc_rsel);
|
|
if (sc->sc_async_audio)
|
|
psignal(sc->sc_async_audio, SIGIO);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Called from HW driver module on completion of dma input.
|
|
* Mark it as input in the ring buffer (fiddle pointers).
|
|
* Do a wakeup if necessary.
|
|
*/
|
|
void
|
|
audio_rint(void *v)
|
|
{
|
|
struct audio_softc *sc = v;
|
|
struct audio_hw_if *hw = sc->hw_if;
|
|
struct audio_ringbuffer *cb = &sc->sc_rr;
|
|
int blksize;
|
|
int error;
|
|
|
|
if (!sc->sc_open)
|
|
return; /* ignore interrupt if not open */
|
|
|
|
blksize = cb->blksize;
|
|
|
|
cb->inp += blksize;
|
|
if (cb->inp >= cb->end)
|
|
cb->inp = cb->start;
|
|
cb->stamp += blksize;
|
|
if (cb->mmapped) {
|
|
DPRINTFN(2, ("audio_rint: mmapped inp=%p cc=%d\n",
|
|
cb->inp, blksize));
|
|
if (!hw->trigger_input)
|
|
(void)hw->start_input(sc->hw_hdl, cb->inp, blksize,
|
|
audio_rint, (void *)sc);
|
|
return;
|
|
}
|
|
|
|
#ifdef AUDIO_INTR_TIME
|
|
{
|
|
struct timeval tv;
|
|
u_long t;
|
|
microtime(&tv);
|
|
t = tv.tv_usec + 1000000 * tv.tv_sec;
|
|
if (sc->sc_rnintr) {
|
|
long lastdelta, totdelta;
|
|
lastdelta = t - sc->sc_rlastintr - sc->sc_rblktime;
|
|
if (lastdelta > sc->sc_rblktime / 5) {
|
|
printf("audio: record interrupt(%d) off "
|
|
"relative by %ld us (%lu)\n",
|
|
sc->sc_rnintr, lastdelta,
|
|
sc->sc_rblktime);
|
|
}
|
|
totdelta = t - sc->sc_rfirstintr -
|
|
sc->sc_rblktime * sc->sc_rnintr;
|
|
if (totdelta > sc->sc_rblktime / 2) {
|
|
sc->sc_rnintr++;
|
|
printf("audio: record interrupt(%d) off "
|
|
"absolute by %ld us (%lu)\n",
|
|
sc->sc_rnintr, totdelta,
|
|
sc->sc_rblktime);
|
|
sc->sc_rnintr++; /* avoid repeated messages */
|
|
}
|
|
} else
|
|
sc->sc_rfirstintr = t;
|
|
sc->sc_rlastintr = t;
|
|
sc->sc_rnintr++;
|
|
}
|
|
#endif
|
|
|
|
cb->used += blksize;
|
|
if (cb->pause) {
|
|
DPRINTFN(1, ("audio_rint: pdrops %lu\n", cb->pdrops));
|
|
cb->pdrops += blksize;
|
|
cb->outp += blksize;
|
|
if (cb->outp >= cb->end)
|
|
cb->outp = cb->start;
|
|
cb->used -= blksize;
|
|
} else if (cb->used + blksize >= cb->usedhigh && !cb->copying) {
|
|
DPRINTFN(1, ("audio_rint: drops %lu\n", cb->drops));
|
|
cb->drops += blksize;
|
|
cb->outp += blksize;
|
|
if (cb->outp >= cb->end)
|
|
cb->outp = cb->start;
|
|
cb->used -= blksize;
|
|
}
|
|
|
|
DPRINTFN(2, ("audio_rint: inp=%p cc=%d used=%d\n",
|
|
cb->inp, blksize, cb->used));
|
|
if (!hw->trigger_input) {
|
|
error = hw->start_input(sc->hw_hdl, cb->inp, blksize,
|
|
audio_rint, (void *)sc);
|
|
if (error) {
|
|
/* XXX does this really help? */
|
|
DPRINTF(("audio_rint: restart failed: %d\n", error));
|
|
audio_clear(sc);
|
|
}
|
|
}
|
|
|
|
audio_wakeup(&sc->sc_rchan);
|
|
selwakeup(&sc->sc_rsel);
|
|
if (sc->sc_async_audio)
|
|
psignal(sc->sc_async_audio, SIGIO);
|
|
}
|
|
|
|
int
|
|
audio_check_params(struct audio_params *p)
|
|
{
|
|
if (p->encoding == AUDIO_ENCODING_PCM16) {
|
|
if (p->precision == 8)
|
|
p->encoding = AUDIO_ENCODING_ULINEAR;
|
|
else
|
|
p->encoding = AUDIO_ENCODING_SLINEAR;
|
|
} else if (p->encoding == AUDIO_ENCODING_PCM8) {
|
|
if (p->precision == 8)
|
|
p->encoding = AUDIO_ENCODING_ULINEAR;
|
|
else
|
|
return EINVAL;
|
|
}
|
|
|
|
if (p->encoding == AUDIO_ENCODING_SLINEAR)
|
|
#if BYTE_ORDER == LITTLE_ENDIAN
|
|
p->encoding = AUDIO_ENCODING_SLINEAR_LE;
|
|
#else
|
|
p->encoding = AUDIO_ENCODING_SLINEAR_BE;
|
|
#endif
|
|
if (p->encoding == AUDIO_ENCODING_ULINEAR)
|
|
#if BYTE_ORDER == LITTLE_ENDIAN
|
|
p->encoding = AUDIO_ENCODING_ULINEAR_LE;
|
|
#else
|
|
p->encoding = AUDIO_ENCODING_ULINEAR_BE;
|
|
#endif
|
|
|
|
switch (p->encoding) {
|
|
case AUDIO_ENCODING_ULAW:
|
|
case AUDIO_ENCODING_ALAW:
|
|
if (p->precision != 8)
|
|
return (EINVAL);
|
|
break;
|
|
case AUDIO_ENCODING_ADPCM:
|
|
if (p->precision != 4 && p->precision != 8)
|
|
return (EINVAL);
|
|
break;
|
|
case AUDIO_ENCODING_SLINEAR_LE:
|
|
case AUDIO_ENCODING_SLINEAR_BE:
|
|
case AUDIO_ENCODING_ULINEAR_LE:
|
|
case AUDIO_ENCODING_ULINEAR_BE:
|
|
/* XXX is: our zero-fill can handle any multiple of 8 */
|
|
if (p->precision != 8 && p->precision != 16 &&
|
|
p->precision != 24 && p->precision != 32)
|
|
return (EINVAL);
|
|
break;
|
|
case AUDIO_ENCODING_MPEG_L1_STREAM:
|
|
case AUDIO_ENCODING_MPEG_L1_PACKETS:
|
|
case AUDIO_ENCODING_MPEG_L1_SYSTEM:
|
|
case AUDIO_ENCODING_MPEG_L2_STREAM:
|
|
case AUDIO_ENCODING_MPEG_L2_PACKETS:
|
|
case AUDIO_ENCODING_MPEG_L2_SYSTEM:
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
if (p->channels < 1 || p->channels > 8) /* sanity check # of channels*/
|
|
return (EINVAL);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
au_set_lr_value(struct audio_softc *sc, mixer_ctrl_t *ct, int l, int r)
|
|
{
|
|
ct->type = AUDIO_MIXER_VALUE;
|
|
ct->un.value.num_channels = 2;
|
|
ct->un.value.level[AUDIO_MIXER_LEVEL_LEFT] = l;
|
|
ct->un.value.level[AUDIO_MIXER_LEVEL_RIGHT] = r;
|
|
if (sc->hw_if->set_port(sc->hw_hdl, ct) == 0)
|
|
return 0;
|
|
ct->un.value.num_channels = 1;
|
|
ct->un.value.level[AUDIO_MIXER_LEVEL_MONO] = (l+r)/2;
|
|
return sc->hw_if->set_port(sc->hw_hdl, ct);
|
|
}
|
|
|
|
int
|
|
au_set_gain(struct audio_softc *sc, struct au_mixer_ports *ports,
|
|
int gain, int balance)
|
|
{
|
|
mixer_ctrl_t ct;
|
|
int i, error;
|
|
int l, r;
|
|
u_int mask;
|
|
int nset;
|
|
|
|
if (balance == AUDIO_MID_BALANCE) {
|
|
l = r = gain;
|
|
} else if (balance < AUDIO_MID_BALANCE) {
|
|
r = gain;
|
|
l = (balance * gain) / AUDIO_MID_BALANCE;
|
|
} else {
|
|
l = gain;
|
|
r = ((AUDIO_RIGHT_BALANCE - balance) * gain)
|
|
/ AUDIO_MID_BALANCE;
|
|
}
|
|
DPRINTF(("au_set_gain: gain=%d balance=%d, l=%d r=%d\n",
|
|
gain, balance, l, r));
|
|
|
|
if (ports->index == -1) {
|
|
usemaster:
|
|
if (ports->master == -1)
|
|
return 0; /* just ignore it silently */
|
|
ct.dev = ports->master;
|
|
error = au_set_lr_value(sc, &ct, l, r);
|
|
} else {
|
|
ct.dev = ports->index;
|
|
if (ports->isenum) {
|
|
ct.type = AUDIO_MIXER_ENUM;
|
|
error = sc->hw_if->get_port(sc->hw_hdl, &ct);
|
|
if (error)
|
|
return error;
|
|
for(i = 0; i < ports->nports; i++) {
|
|
if (ports->misel[i] == ct.un.ord) {
|
|
ct.dev = ports->miport[i];
|
|
if (ct.dev == -1 ||
|
|
au_set_lr_value(sc, &ct, l, r))
|
|
goto usemaster;
|
|
else
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
ct.type = AUDIO_MIXER_SET;
|
|
error = sc->hw_if->get_port(sc->hw_hdl, &ct);
|
|
if (error)
|
|
return error;
|
|
mask = ct.un.mask;
|
|
nset = 0;
|
|
for(i = 0; i < ports->nports; i++) {
|
|
if (ports->misel[i] & mask) {
|
|
ct.dev = ports->miport[i];
|
|
if (ct.dev != -1 &&
|
|
au_set_lr_value(sc, &ct, l, r) == 0)
|
|
nset++;
|
|
}
|
|
}
|
|
if (nset == 0)
|
|
goto usemaster;
|
|
}
|
|
}
|
|
if (!error)
|
|
mixer_signal(sc);
|
|
return error;
|
|
}
|
|
|
|
int
|
|
au_get_lr_value(struct audio_softc *sc, mixer_ctrl_t *ct, int *l, int *r)
|
|
{
|
|
int error;
|
|
|
|
ct->un.value.num_channels = 2;
|
|
if (sc->hw_if->get_port(sc->hw_hdl, ct) == 0) {
|
|
*l = ct->un.value.level[AUDIO_MIXER_LEVEL_LEFT];
|
|
*r = ct->un.value.level[AUDIO_MIXER_LEVEL_RIGHT];
|
|
} else {
|
|
ct->un.value.num_channels = 1;
|
|
error = sc->hw_if->get_port(sc->hw_hdl, ct);
|
|
if (error)
|
|
return error;
|
|
*r = *l = ct->un.value.level[AUDIO_MIXER_LEVEL_MONO];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
au_get_gain(struct audio_softc *sc, struct au_mixer_ports *ports,
|
|
u_int *pgain, u_char *pbalance)
|
|
{
|
|
mixer_ctrl_t ct;
|
|
int i, l, r, n;
|
|
int lgain = AUDIO_MAX_GAIN/2, rgain = AUDIO_MAX_GAIN/2;
|
|
|
|
if (ports->index == -1) {
|
|
usemaster:
|
|
if (ports->master == -1)
|
|
goto bad;
|
|
ct.dev = ports->master;
|
|
ct.type = AUDIO_MIXER_VALUE;
|
|
if (au_get_lr_value(sc, &ct, &lgain, &rgain))
|
|
goto bad;
|
|
} else {
|
|
ct.dev = ports->index;
|
|
if (ports->isenum) {
|
|
ct.type = AUDIO_MIXER_ENUM;
|
|
if (sc->hw_if->get_port(sc->hw_hdl, &ct))
|
|
goto bad;
|
|
ct.type = AUDIO_MIXER_VALUE;
|
|
for(i = 0; i < ports->nports; i++) {
|
|
if (ports->misel[i] == ct.un.ord) {
|
|
ct.dev = ports->miport[i];
|
|
if (ct.dev == -1 ||
|
|
au_get_lr_value(sc, &ct,
|
|
&lgain, &rgain))
|
|
goto usemaster;
|
|
else
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
ct.type = AUDIO_MIXER_SET;
|
|
if (sc->hw_if->get_port(sc->hw_hdl, &ct))
|
|
goto bad;
|
|
ct.type = AUDIO_MIXER_VALUE;
|
|
lgain = rgain = n = 0;
|
|
for(i = 0; i < ports->nports; i++) {
|
|
if (ports->misel[i] & ct.un.mask) {
|
|
ct.dev = ports->miport[i];
|
|
if (ct.dev == -1 ||
|
|
au_get_lr_value(sc, &ct, &l, &r))
|
|
goto usemaster;
|
|
else {
|
|
lgain += l;
|
|
rgain += r;
|
|
n++;
|
|
}
|
|
}
|
|
}
|
|
if (n != 0) {
|
|
lgain /= n;
|
|
rgain /= n;
|
|
}
|
|
}
|
|
}
|
|
bad:
|
|
if (lgain == rgain) { /* handles lgain==rgain==0 */
|
|
*pgain = lgain;
|
|
*pbalance = AUDIO_MID_BALANCE;
|
|
} else if (lgain < rgain) {
|
|
*pgain = rgain;
|
|
*pbalance = (AUDIO_MID_BALANCE * lgain) / rgain;
|
|
} else /* lgain > rgain */ {
|
|
*pgain = lgain;
|
|
*pbalance = AUDIO_RIGHT_BALANCE -
|
|
(AUDIO_MID_BALANCE * rgain) / lgain;
|
|
}
|
|
}
|
|
|
|
int
|
|
au_set_port(struct audio_softc *sc, struct au_mixer_ports *ports, u_int port)
|
|
{
|
|
mixer_ctrl_t ct;
|
|
int i, error;
|
|
|
|
if (port == 0 && ports->allports == 0)
|
|
return 0; /* allow this special case */
|
|
|
|
if (ports->index == -1)
|
|
return EINVAL;
|
|
ct.dev = ports->index;
|
|
if (ports->isenum) {
|
|
if (port & (port-1))
|
|
return EINVAL; /* Only one port allowed */
|
|
ct.type = AUDIO_MIXER_ENUM;
|
|
error = EINVAL;
|
|
for(i = 0; i < ports->nports; i++)
|
|
if (ports->aumask[i] == port) {
|
|
ct.un.ord = ports->misel[i];
|
|
error = sc->hw_if->set_port(sc->hw_hdl, &ct);
|
|
break;
|
|
}
|
|
} else {
|
|
ct.type = AUDIO_MIXER_SET;
|
|
ct.un.mask = 0;
|
|
for(i = 0; i < ports->nports; i++)
|
|
if (ports->aumask[i] & port)
|
|
ct.un.mask |= ports->misel[i];
|
|
if (port != 0 && ct.un.mask == 0)
|
|
error = EINVAL;
|
|
else
|
|
error = sc->hw_if->set_port(sc->hw_hdl, &ct);
|
|
}
|
|
if (!error)
|
|
mixer_signal(sc);
|
|
return error;
|
|
}
|
|
|
|
int
|
|
au_get_port(struct audio_softc *sc, struct au_mixer_ports *ports)
|
|
{
|
|
mixer_ctrl_t ct;
|
|
int i, aumask;
|
|
|
|
if (ports->index == -1)
|
|
return 0;
|
|
ct.dev = ports->index;
|
|
ct.type = ports->isenum ? AUDIO_MIXER_ENUM : AUDIO_MIXER_SET;
|
|
if (sc->hw_if->get_port(sc->hw_hdl, &ct))
|
|
return 0;
|
|
aumask = 0;
|
|
if (ports->isenum) {
|
|
for(i = 0; i < ports->nports; i++)
|
|
if (ct.un.ord == ports->misel[i])
|
|
aumask = ports->aumask[i];
|
|
} else {
|
|
for(i = 0; i < ports->nports; i++)
|
|
if (ct.un.mask & ports->misel[i])
|
|
aumask |= ports->aumask[i];
|
|
}
|
|
return aumask;
|
|
}
|
|
|
|
#if NAURATECONV <= 0
|
|
/* dummy function for the case that aurateconv is not linked */
|
|
int
|
|
auconv_check_params(const struct audio_params *params)
|
|
{
|
|
if (params->hw_channels == params->channels
|
|
&& params->hw_sample_rate == params->sample_rate)
|
|
return 0; /* No conversion */
|
|
return (EINVAL);
|
|
}
|
|
#endif /* !NAURATECONV */
|
|
|
|
int
|
|
audiosetinfo(struct audio_softc *sc, struct audio_info *ai)
|
|
{
|
|
struct audio_prinfo *r = &ai->record, *p = &ai->play;
|
|
int cleared;
|
|
int s, setmode, modechange = 0;
|
|
int error;
|
|
struct audio_hw_if *hw = sc->hw_if;
|
|
struct audio_params pp, rp;
|
|
int np, nr;
|
|
unsigned int blks;
|
|
int oldpblksize, oldrblksize;
|
|
int rbus, pbus;
|
|
u_int gain;
|
|
u_char balance;
|
|
|
|
if (hw == 0) /* HW has not attached */
|
|
return(ENXIO);
|
|
|
|
rbus = sc->sc_rbus;
|
|
pbus = sc->sc_pbus;
|
|
error = 0;
|
|
cleared = 0;
|
|
|
|
pp = sc->sc_pparams; /* Temporary encoding storage in */
|
|
rp = sc->sc_rparams; /* case setting the modes fails. */
|
|
nr = np = 0;
|
|
|
|
if (p->sample_rate != ~0) {
|
|
pp.sample_rate = p->sample_rate;
|
|
np++;
|
|
}
|
|
if (r->sample_rate != ~0) {
|
|
rp.sample_rate = r->sample_rate;
|
|
nr++;
|
|
}
|
|
if (p->encoding != ~0) {
|
|
pp.encoding = p->encoding;
|
|
np++;
|
|
}
|
|
if (r->encoding != ~0) {
|
|
rp.encoding = r->encoding;
|
|
nr++;
|
|
}
|
|
if (p->precision != ~0) {
|
|
pp.precision = p->precision;
|
|
np++;
|
|
}
|
|
if (r->precision != ~0) {
|
|
rp.precision = r->precision;
|
|
nr++;
|
|
}
|
|
if (p->channels != ~0) {
|
|
pp.channels = p->channels;
|
|
np++;
|
|
}
|
|
if (r->channels != ~0) {
|
|
rp.channels = r->channels;
|
|
nr++;
|
|
}
|
|
#ifdef AUDIO_DEBUG
|
|
if (audiodebug && nr)
|
|
audio_print_params("Setting record params", &rp);
|
|
if (audiodebug && np)
|
|
audio_print_params("Setting play params", &pp);
|
|
#endif
|
|
if (nr && (error = audio_check_params(&rp)))
|
|
return error;
|
|
if (np && (error = audio_check_params(&pp)))
|
|
return error;
|
|
setmode = 0;
|
|
if (nr) {
|
|
if (!cleared)
|
|
audio_clear(sc);
|
|
modechange = cleared = 1;
|
|
rp.sw_code = 0;
|
|
rp.factor = 1;
|
|
rp.factor_denom = 1;
|
|
rp.hw_sample_rate = rp.sample_rate;
|
|
rp.hw_encoding = rp.encoding;
|
|
rp.hw_precision = rp.precision;
|
|
rp.hw_channels = rp.channels;
|
|
setmode |= AUMODE_RECORD;
|
|
}
|
|
if (np) {
|
|
if (!cleared)
|
|
audio_clear(sc);
|
|
modechange = cleared = 1;
|
|
pp.sw_code = 0;
|
|
pp.factor = 1;
|
|
pp.factor_denom = 1;
|
|
pp.hw_sample_rate = pp.sample_rate;
|
|
pp.hw_encoding = pp.encoding;
|
|
pp.hw_precision = pp.precision;
|
|
pp.hw_channels = pp.channels;
|
|
setmode |= AUMODE_PLAY;
|
|
}
|
|
|
|
if (ai->mode != ~0) {
|
|
if (!cleared)
|
|
audio_clear(sc);
|
|
modechange = cleared = 1;
|
|
sc->sc_mode = ai->mode;
|
|
if (sc->sc_mode & AUMODE_PLAY_ALL)
|
|
sc->sc_mode |= AUMODE_PLAY;
|
|
if ((sc->sc_mode & AUMODE_PLAY) && !sc->sc_full_duplex)
|
|
/* Play takes precedence */
|
|
sc->sc_mode &= ~AUMODE_RECORD;
|
|
}
|
|
|
|
if (modechange) {
|
|
int orig_p_channels, orig_p_rate;
|
|
int orig_r_channels, orig_r_rate;
|
|
int indep;
|
|
|
|
indep = hw->get_props(sc->hw_hdl) & AUDIO_PROP_INDEPENDENT;
|
|
if (!indep) {
|
|
if (setmode == AUMODE_RECORD)
|
|
pp = rp;
|
|
else if (setmode == AUMODE_PLAY)
|
|
rp = pp;
|
|
}
|
|
/* Some device drivers change channels/sample_rate and change
|
|
* no channels/sample_rate. */
|
|
orig_p_channels = pp.channels;
|
|
orig_p_rate = pp.sample_rate;
|
|
orig_r_channels = rp.channels;
|
|
orig_r_rate = rp.sample_rate;
|
|
error = hw->set_params(sc->hw_hdl, setmode,
|
|
sc->sc_mode & (AUMODE_PLAY | AUMODE_RECORD), &pp, &rp);
|
|
if (error)
|
|
return (error);
|
|
|
|
if (np) {
|
|
if (orig_p_channels != pp.channels)
|
|
pp.hw_channels = pp.channels;
|
|
if (orig_p_rate != pp.sample_rate)
|
|
pp.hw_sample_rate = pp.sample_rate;
|
|
error = auconv_check_params(&pp);
|
|
if (error)
|
|
return (error);
|
|
}
|
|
if (nr) {
|
|
if (orig_r_channels != rp.channels)
|
|
rp.hw_channels = rp.channels;
|
|
if (orig_r_rate != rp.sample_rate)
|
|
rp.hw_sample_rate = rp.sample_rate;
|
|
error = auconv_check_params(&rp);
|
|
if (error)
|
|
return (error);
|
|
}
|
|
|
|
if (!indep) {
|
|
if (setmode == AUMODE_RECORD) {
|
|
pp.sample_rate = rp.sample_rate;
|
|
pp.encoding = rp.encoding;
|
|
pp.channels = rp.channels;
|
|
pp.precision = rp.precision;
|
|
} else if (setmode == AUMODE_PLAY) {
|
|
rp.sample_rate = pp.sample_rate;
|
|
rp.encoding = pp.encoding;
|
|
rp.channels = pp.channels;
|
|
rp.precision = pp.precision;
|
|
}
|
|
}
|
|
sc->sc_rparams = rp;
|
|
sc->sc_pparams = pp;
|
|
}
|
|
|
|
oldpblksize = sc->sc_pr.blksize;
|
|
oldrblksize = sc->sc_rr.blksize;
|
|
/* Play params can affect the record params, so recalculate blksize. */
|
|
if (nr || np) {
|
|
audio_calc_blksize(sc, AUMODE_RECORD);
|
|
audio_calc_blksize(sc, AUMODE_PLAY);
|
|
}
|
|
#ifdef AUDIO_DEBUG
|
|
if (audiodebug > 1 && nr)
|
|
audio_print_params("After setting record params", &sc->sc_rparams);
|
|
if (audiodebug > 1 && np)
|
|
audio_print_params("After setting play params", &sc->sc_pparams);
|
|
#endif
|
|
|
|
if (p->port != ~0) {
|
|
if (!cleared)
|
|
audio_clear(sc);
|
|
cleared = 1;
|
|
|
|
error = au_set_port(sc, &sc->sc_outports, p->port);
|
|
if (error)
|
|
return(error);
|
|
}
|
|
if (r->port != ~0) {
|
|
if (!cleared)
|
|
audio_clear(sc);
|
|
cleared = 1;
|
|
|
|
error = au_set_port(sc, &sc->sc_inports, r->port);
|
|
if (error)
|
|
return(error);
|
|
}
|
|
if (p->gain != ~0) {
|
|
au_get_gain(sc, &sc->sc_outports, &gain, &balance);
|
|
error = au_set_gain(sc, &sc->sc_outports, p->gain, balance);
|
|
if (error)
|
|
return(error);
|
|
}
|
|
if (r->gain != ~0) {
|
|
au_get_gain(sc, &sc->sc_inports, &gain, &balance);
|
|
error = au_set_gain(sc, &sc->sc_inports, r->gain, balance);
|
|
if (error)
|
|
return(error);
|
|
}
|
|
|
|
if (p->balance != (u_char)~0) {
|
|
au_get_gain(sc, &sc->sc_outports, &gain, &balance);
|
|
error = au_set_gain(sc, &sc->sc_outports, gain, p->balance);
|
|
if (error)
|
|
return(error);
|
|
}
|
|
if (r->balance != (u_char)~0) {
|
|
au_get_gain(sc, &sc->sc_inports, &gain, &balance);
|
|
error = au_set_gain(sc, &sc->sc_inports, gain, r->balance);
|
|
if (error)
|
|
return(error);
|
|
}
|
|
|
|
if (ai->monitor_gain != ~0 &&
|
|
sc->sc_monitor_port != -1) {
|
|
mixer_ctrl_t ct;
|
|
|
|
ct.dev = sc->sc_monitor_port;
|
|
ct.type = AUDIO_MIXER_VALUE;
|
|
ct.un.value.num_channels = 1;
|
|
ct.un.value.level[AUDIO_MIXER_LEVEL_MONO] = ai->monitor_gain;
|
|
error = sc->hw_if->set_port(sc->hw_hdl, &ct);
|
|
if (error)
|
|
return(error);
|
|
}
|
|
|
|
if (p->pause != (u_char)~0) {
|
|
sc->sc_pr.pause = p->pause;
|
|
if (!p->pause && !sc->sc_pbus && (sc->sc_mode & AUMODE_PLAY)) {
|
|
s = splaudio();
|
|
error = audiostartp(sc);
|
|
splx(s);
|
|
if (error)
|
|
return error;
|
|
}
|
|
}
|
|
if (r->pause != (u_char)~0) {
|
|
sc->sc_rr.pause = r->pause;
|
|
if (!r->pause && !sc->sc_rbus &&
|
|
(sc->sc_mode & AUMODE_RECORD)) {
|
|
s = splaudio();
|
|
error = audiostartr(sc);
|
|
splx(s);
|
|
if (error)
|
|
return error;
|
|
}
|
|
}
|
|
|
|
if (ai->blocksize != ~0) {
|
|
/* Block size specified explicitly. */
|
|
if (!cleared)
|
|
audio_clear(sc);
|
|
cleared = 1;
|
|
|
|
if (ai->blocksize == 0) {
|
|
audio_calc_blksize(sc, AUMODE_RECORD);
|
|
audio_calc_blksize(sc, AUMODE_PLAY);
|
|
sc->sc_blkset = 0;
|
|
} else {
|
|
int bs = ai->blocksize;
|
|
if (hw->round_blocksize)
|
|
bs = hw->round_blocksize(sc->hw_hdl, bs);
|
|
/*
|
|
* The blocksize should never be 0, but a faulty
|
|
* driver might set it wrong. Just use something.
|
|
*/
|
|
if (bs <= 0)
|
|
bs = 512;
|
|
|
|
sc->sc_pr.blksize = sc->sc_rr.blksize = bs;
|
|
sc->sc_blkset = 1;
|
|
}
|
|
}
|
|
|
|
if (ai->mode != ~0) {
|
|
if (sc->sc_mode & AUMODE_PLAY)
|
|
audio_init_play(sc);
|
|
if (sc->sc_mode & AUMODE_RECORD)
|
|
audio_init_record(sc);
|
|
}
|
|
|
|
if (hw->commit_settings) {
|
|
error = hw->commit_settings(sc->hw_hdl);
|
|
if (error)
|
|
return (error);
|
|
}
|
|
|
|
if (cleared) {
|
|
s = splaudio();
|
|
error = audio_initbufs(sc);
|
|
if (error) goto err;
|
|
if (sc->sc_pr.blksize != oldpblksize ||
|
|
sc->sc_rr.blksize != oldrblksize)
|
|
audio_calcwater(sc);
|
|
if ((sc->sc_mode & AUMODE_PLAY) &&
|
|
pbus && !sc->sc_pbus)
|
|
error = audiostartp(sc);
|
|
if (!error &&
|
|
(sc->sc_mode & AUMODE_RECORD) &&
|
|
rbus && !sc->sc_rbus)
|
|
error = audiostartr(sc);
|
|
err:
|
|
splx(s);
|
|
if (error)
|
|
return error;
|
|
}
|
|
|
|
/* Change water marks after initializing the buffers. */
|
|
if (ai->hiwat != ~0) {
|
|
blks = ai->hiwat;
|
|
if (blks > sc->sc_pr.maxblks)
|
|
blks = sc->sc_pr.maxblks;
|
|
if (blks < 2)
|
|
blks = 2;
|
|
sc->sc_pr.usedhigh = blks * sc->sc_pr.blksize;
|
|
}
|
|
if (ai->lowat != ~0) {
|
|
blks = ai->lowat;
|
|
if (blks > sc->sc_pr.maxblks - 1)
|
|
blks = sc->sc_pr.maxblks - 1;
|
|
sc->sc_pr.usedlow = blks * sc->sc_pr.blksize;
|
|
}
|
|
if (ai->hiwat != ~0 || ai->lowat != ~0) {
|
|
if (sc->sc_pr.usedlow > sc->sc_pr.usedhigh - sc->sc_pr.blksize)
|
|
sc->sc_pr.usedlow =
|
|
sc->sc_pr.usedhigh - sc->sc_pr.blksize;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
audiogetinfo(struct audio_softc *sc, struct audio_info *ai)
|
|
{
|
|
struct audio_prinfo *r = &ai->record, *p = &ai->play;
|
|
struct audio_hw_if *hw = sc->hw_if;
|
|
|
|
if (hw == 0) /* HW has not attached */
|
|
return(ENXIO);
|
|
|
|
p->sample_rate = sc->sc_pparams.sample_rate;
|
|
r->sample_rate = sc->sc_rparams.sample_rate;
|
|
p->channels = sc->sc_pparams.channels;
|
|
r->channels = sc->sc_rparams.channels;
|
|
p->precision = sc->sc_pparams.precision;
|
|
r->precision = sc->sc_rparams.precision;
|
|
p->encoding = sc->sc_pparams.encoding;
|
|
r->encoding = sc->sc_rparams.encoding;
|
|
|
|
r->port = au_get_port(sc, &sc->sc_inports);
|
|
p->port = au_get_port(sc, &sc->sc_outports);
|
|
|
|
r->avail_ports = sc->sc_inports.allports;
|
|
p->avail_ports = sc->sc_outports.allports;
|
|
|
|
au_get_gain(sc, &sc->sc_inports, &r->gain, &r->balance);
|
|
au_get_gain(sc, &sc->sc_outports, &p->gain, &p->balance);
|
|
|
|
if (sc->sc_monitor_port != -1) {
|
|
mixer_ctrl_t ct;
|
|
|
|
ct.dev = sc->sc_monitor_port;
|
|
ct.type = AUDIO_MIXER_VALUE;
|
|
ct.un.value.num_channels = 1;
|
|
if (sc->hw_if->get_port(sc->hw_hdl, &ct))
|
|
ai->monitor_gain = 0;
|
|
else
|
|
ai->monitor_gain =
|
|
ct.un.value.level[AUDIO_MIXER_LEVEL_MONO];
|
|
} else
|
|
ai->monitor_gain = 0;
|
|
|
|
p->seek = sc->sc_pr.used;
|
|
r->seek = sc->sc_rr.used;
|
|
|
|
p->samples = sc->sc_pr.stamp - sc->sc_pr.drops;
|
|
r->samples = sc->sc_rr.stamp - sc->sc_rr.drops;
|
|
|
|
p->eof = sc->sc_eof;
|
|
r->eof = 0;
|
|
|
|
p->pause = sc->sc_pr.pause;
|
|
r->pause = sc->sc_rr.pause;
|
|
|
|
p->error = sc->sc_pr.drops != 0;
|
|
r->error = sc->sc_rr.drops != 0;
|
|
|
|
p->waiting = r->waiting = 0; /* open never hangs */
|
|
|
|
p->open = (sc->sc_open & AUOPEN_WRITE) != 0;
|
|
r->open = (sc->sc_open & AUOPEN_READ) != 0;
|
|
|
|
p->active = sc->sc_pbus;
|
|
r->active = sc->sc_rbus;
|
|
|
|
p->buffer_size = sc->sc_pr.bufsize;
|
|
r->buffer_size = sc->sc_rr.bufsize;
|
|
|
|
ai->blocksize = sc->sc_pr.blksize;
|
|
ai->hiwat = sc->sc_pr.usedhigh / sc->sc_pr.blksize;
|
|
ai->lowat = sc->sc_pr.usedlow / sc->sc_pr.blksize;
|
|
ai->mode = sc->sc_mode;
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Mixer driver
|
|
*/
|
|
int
|
|
mixer_open(dev_t dev, struct audio_softc *sc, int flags, int ifmt,
|
|
struct proc *p)
|
|
{
|
|
if (!sc->hw_if)
|
|
return (ENXIO);
|
|
|
|
DPRINTF(("mixer_open: flags=0x%x sc=%p\n", flags, sc));
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Remove a process from those to be signalled on mixer activity.
|
|
*/
|
|
static void
|
|
mixer_remove(struct audio_softc *sc, struct proc *p)
|
|
{
|
|
struct mixer_asyncs **pm, *m;
|
|
|
|
for(pm = &sc->sc_async_mixer; *pm; pm = &(*pm)->next) {
|
|
if ((*pm)->proc == p) {
|
|
m = *pm;
|
|
*pm = m->next;
|
|
free(m, M_DEVBUF);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Signal all processes waiting for the mixer.
|
|
*/
|
|
static void
|
|
mixer_signal(struct audio_softc *sc)
|
|
{
|
|
struct mixer_asyncs *m;
|
|
|
|
for(m = sc->sc_async_mixer; m; m = m->next)
|
|
psignal(m->proc, SIGIO);
|
|
}
|
|
|
|
/*
|
|
* Close a mixer device
|
|
*/
|
|
/* ARGSUSED */
|
|
int
|
|
mixer_close(struct audio_softc *sc, int flags, int ifmt, struct proc *p)
|
|
{
|
|
DPRINTF(("mixer_close: sc %p\n", sc));
|
|
|
|
mixer_remove(sc, p);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
mixer_ioctl(struct audio_softc *sc, u_long cmd, caddr_t addr, int flag,
|
|
struct proc *p)
|
|
{
|
|
struct audio_hw_if *hw = sc->hw_if;
|
|
int error = EINVAL;
|
|
|
|
DPRINTF(("mixer_ioctl(%lu,'%c',%lu)\n",
|
|
IOCPARM_LEN(cmd), (char)IOCGROUP(cmd), cmd&0xff));
|
|
|
|
switch (cmd) {
|
|
case FIOASYNC:
|
|
mixer_remove(sc, p); /* remove old entry */
|
|
if (*(int *)addr) {
|
|
struct mixer_asyncs *ma;
|
|
ma = malloc(sizeof (struct mixer_asyncs),
|
|
M_DEVBUF, M_WAITOK);
|
|
ma->next = sc->sc_async_mixer;
|
|
ma->proc = p;
|
|
sc->sc_async_mixer = ma;
|
|
}
|
|
error = 0;
|
|
break;
|
|
|
|
case AUDIO_GETDEV:
|
|
DPRINTF(("AUDIO_GETDEV\n"));
|
|
error = hw->getdev(sc->hw_hdl, (audio_device_t *)addr);
|
|
break;
|
|
|
|
case AUDIO_MIXER_DEVINFO:
|
|
DPRINTF(("AUDIO_MIXER_DEVINFO\n"));
|
|
((mixer_devinfo_t *)addr)->un.v.delta = 0; /* default */
|
|
error = hw->query_devinfo(sc->hw_hdl, (mixer_devinfo_t *)addr);
|
|
break;
|
|
|
|
case AUDIO_MIXER_READ:
|
|
DPRINTF(("AUDIO_MIXER_READ\n"));
|
|
error = hw->get_port(sc->hw_hdl, (mixer_ctrl_t *)addr);
|
|
break;
|
|
|
|
case AUDIO_MIXER_WRITE:
|
|
DPRINTF(("AUDIO_MIXER_WRITE\n"));
|
|
error = hw->set_port(sc->hw_hdl, (mixer_ctrl_t *)addr);
|
|
if (!error && hw->commit_settings)
|
|
error = hw->commit_settings(sc->hw_hdl);
|
|
if (!error)
|
|
mixer_signal(sc);
|
|
break;
|
|
|
|
default:
|
|
if (hw->dev_ioctl)
|
|
error = hw->dev_ioctl(sc->hw_hdl, cmd, addr, flag, p);
|
|
else
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
DPRINTF(("mixer_ioctl(%lu,'%c',%lu) result %d\n",
|
|
IOCPARM_LEN(cmd), (char)IOCGROUP(cmd), cmd&0xff, error));
|
|
return (error);
|
|
}
|
|
#endif /* NAUDIO > 0 */
|
|
|
|
#include "midi.h"
|
|
|
|
#if NAUDIO == 0 && (NMIDI > 0 || NMIDIBUS > 0)
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/device.h>
|
|
#include <sys/audioio.h>
|
|
#include <dev/audio_if.h>
|
|
#endif
|
|
|
|
#if NAUDIO > 0 || (NMIDI > 0 || NMIDIBUS > 0)
|
|
int
|
|
audioprint(void *aux, const char *pnp)
|
|
{
|
|
struct audio_attach_args *arg = aux;
|
|
const char *type;
|
|
|
|
if (pnp != NULL) {
|
|
switch (arg->type) {
|
|
case AUDIODEV_TYPE_AUDIO:
|
|
type = "audio";
|
|
break;
|
|
case AUDIODEV_TYPE_MIDI:
|
|
type = "midi";
|
|
break;
|
|
case AUDIODEV_TYPE_OPL:
|
|
type = "opl";
|
|
break;
|
|
case AUDIODEV_TYPE_MPU:
|
|
type = "mpu";
|
|
break;
|
|
default:
|
|
panic("audioprint: unknown type %d", arg->type);
|
|
}
|
|
printf("%s at %s", type, pnp);
|
|
}
|
|
return (UNCONF);
|
|
}
|
|
|
|
#endif /* NAUDIO > 0 || (NMIDI > 0 || NMIDIBUS > 0) */
|