NetBSD/Makefile

215 lines
6.4 KiB
Makefile

# $NetBSD: Makefile,v 1.161 2002/02/08 16:11:18 lukem Exp $
# This is the top-level makefile for building NetBSD. For an outline of
# how to build a snapshot or release, as well as other release engineering
# information, see http://www.netbsd.org/developers/releng/index.html
#
# Not everything you can set or do is documented in this makefile. In
# particular, you should review the files in /usr/share/mk (especially
# bsd.README) for general information on building programs and writing
# Makefiles within this structure, and see the comments in src/etc/Makefile
# for further information on installation and release set options.
#
# Variables listed below can be set on the make command line (highest
# priority), in /etc/mk.conf (middle priority), or in the environment
# (lowest priority).
#
# Variables:
# DESTDIR is the target directory for installation of the compiled
# software. It defaults to /. Note that programs are built against
# libraries installed in DESTDIR.
# MKMAN, if set to `no', will prevent building of manual pages.
# MKOBJDIRS, if not set to `no', will build object directories at
# an appropriate point in a build.
# MKSHARE, if set to `no', will prevent building and installing
# anything in /usr/share.
# NBUILDJOBS is the number of jobs to start in parallel during a
# `make build'. It defaults to 1.
# UPDATE, if defined, will avoid a `make cleandir' at the start of
# `make build', as well as having the effects listed in
# /usr/share/mk/bsd.README.
# NOCLEANDIR, if defined, will avoid a `make cleandir' at the start
# of the `make build'.
# NOINCLUDES will avoid the `make includes' usually done by `make build'.
#
# Targets:
# build:
# Builds a full release of NetBSD in DESTDIR. If BUILD_DONE is
# set, this is an empty target.
# release:
# Does a `make build,' and then tars up the DESTDIR files
# into RELEASEDIR, in release(7) format. (See etc/Makefile for
# more information on this.)
# regression-tests:
# Runs the regression tests in "regress" on this host.
#
# Targets invoked by `make build,' in order:
# cleandir: cleans the tree.
# obj: creates object directories.
# do-tools: builds host toolchain.
# do-distrib-dirs: creates the distribution directories.
# includes: installs include files.
# do-lib-csu: builds and installs prerequisites from lib/csu.
# do-lib: builds and installs prerequisites from lib.
# do-gnu-lib: builds and installs prerequisites from gnu/lib.
# do-build: builds and installs the entire system.
.if ${.MAKEFLAGS:M${.CURDIR}/share/mk} == ""
.MAKEFLAGS: -m ${.CURDIR}/share/mk
.endif
.include <bsd.own.mk>
# Sanity check: make sure that "make build" is not invoked simultaneously
# with a standard recursive target.
.if make(build) || make(release) || make(snapshot)
.for targ in ${TARGETS:Nobj:Ncleandir}
.if make(${targ}) && !target(.BEGIN)
.BEGIN:
@echo 'BUILD ABORTED: "make build" and "make ${targ}" are mutually exclusive.'
@false
.endif
.endfor
.endif
.if defined(NBUILDJOBS)
_J= -j${NBUILDJOBS}
.endif
_SUBDIR= tools lib include gnu bin games libexec sbin usr.bin \
usr.sbin share sys etc distrib regress
# Weed out directories that don't exist.
.for dir in ${_SUBDIR}
.if exists(${dir}/Makefile) && (${BUILD_${dir}:Uyes} != "no")
SUBDIR+= ${dir}
.endif
.endfor
.if exists(regress)
regression-tests:
@echo Running regression tests...
@(cd ${.CURDIR}/regress && ${MAKE} regress)
.endif
whatis.db:
.if ${MKMAN} != "no"
(cd ${.CURDIR}/share/man && ${MAKE} makedb)
.endif
# XXX I wish there was a more rational place to do this, but I can't
# think of one. There is no one place the info/dir file gets generated.
infodir-meta:
.if defined(UNPRIVED) && (${MKINFO} != "no")
echo "${DESTDIR}/usr/share/info/dir type=file mode=0644 uname=root gname=wheel" | \
sed -e 's|^/|./|g' -e 's|//|/|g' >>${METALOG}
.endif
afterinstall: whatis.db infodir-meta
# Targets (in order!) called by "make build".
BUILDTARGETS+= check-tools
.if !defined(UPDATE) && !defined(NOCLEANDIR)
BUILDTARGETS+= cleandir
.endif
.if ${MKOBJDIRS} != "no"
BUILDTARGETS+= obj
.endif
.if ${USETOOLS} == "yes"
BUILDTARGETS+= do-tools
.endif
.if !defined(NODISTRIBDIRS)
BUILDTARGETS+= do-distrib-dirs
.endif
.if !defined(NOINCLUDES)
BUILDTARGETS+= includes
.endif
BUILDTARGETS+= do-lib-csu do-lib do-gnu-lib do-build
# Enforce proper ordering of some rules.
.ORDER: ${BUILDTARGETS}
includes-lib: includes-include includes-sys
includes-gnu: includes-lib
# Build the system and install into DESTDIR.
build:
.if defined(BUILD_DONE)
@echo "Build already installed into ${DESTDIR}"
.else
@echo -n "Build started at: " && date
.for tgt in ${BUILDTARGETS}
@(cd ${.CURDIR} && ${MAKE} ${_J} ${tgt})
.endfor
@echo -n "Build finished at: " && date
.endif
# Build a full distribution, but not a release (i.e. no sets into
# ${RELEASEDIR}).
distribution: build
(cd ${.CURDIR}/etc && ${MAKE} INSTALL_DONE=1 distribution)
# Build a release or snapshot (implies "make build").
release snapshot: build
(cd ${.CURDIR}/etc && ${MAKE} INSTALL_DONE=1 release)
# Special components of the "make build" process.
check-tools:
.if defined(USE_NEW_TOOLCHAIN) && (${USE_NEW_TOOLCHAIN} != "nowarn")
@echo '*** WARNING: Building on MACHINE=${MACHINE} with USE_NEW_TOOLCHAIN.'
@echo '*** This platform is not yet verified to work with the new toolchain,'
@echo '*** and may result in a failed build or corrupt binaries!'
.endif
do-distrib-dirs:
.if !defined(DESTDIR) || ${DESTDIR} == ""
(cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)
.else
(cd ${.CURDIR}/etc && ${MAKE} DESTDIR=${DESTDIR} distrib-dirs)
.endif
.for dir in tools lib/csu lib gnu/lib
do-${dir:S/\//-/}:
.for targ in dependall install
(cd ${.CURDIR}/${dir} && ${MAKE} ${_J} ${targ})
.endfor
.endfor
do-build:
.for targ in dependall install
(cd ${.CURDIR} && ${MAKE} ${_J} ${targ} BUILD_tools=no BUILD_lib=no)
.endfor
# Speedup stubs for some subtrees that don't need to run these rules.
# (Tells <bsd.subdir.mk> not to recurse for them.)
.for dir in bin etc distrib games libexec regress sbin usr.sbin tools
includes-${dir}:
@true
.endfor
.for dir in etc distrib regress
install-${dir}:
@true
.endfor
# XXX this needs to change when distrib Makefiles are recursion compliant
dependall-distrib depend-distrib all-distrib:
@true
clean:
rm -f METALOG
.include <bsd.obj.mk>
.include <bsd.subdir.mk>
build-docs: ${.CURDIR}/BUILDING
${.CURDIR}/BUILDING: BUILDING.mdoc
groff -mdoc -Tascii -P-b -P-u -P-o $> >$@