NetBSD/gnu/dist/gas/doc/as.info-1

1358 lines
49 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This is Info file as.info, produced by Makeinfo-1.64 from the input
file ./as.texinfo.
START-INFO-DIR-ENTRY
* As: (as). The GNU assembler.
END-INFO-DIR-ENTRY
This file documents the GNU Assembler "as".
Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software
Foundation, Inc.
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.
Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided that
the entire resulting derived work is distributed under the terms of a
permission notice identical to this one.
Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions.

File: as.info, Node: Top, Next: Overview, Up: (dir)
Using as
********
This file is a user guide to the GNU assembler `as'.
* Menu:
* Overview:: Overview
* Invoking:: Command-Line Options
* Syntax:: Syntax
* Sections:: Sections and Relocation
* Symbols:: Symbols
* Expressions:: Expressions
* Pseudo Ops:: Assembler Directives
* Machine Dependencies:: Machine Dependent Features
* Reporting Bugs:: Reporting Bugs
* Acknowledgements:: Who Did What
* Index:: Index

File: as.info, Node: Overview, Next: Invoking, Prev: Top, Up: Top
Overview
********
Here is a brief summary of how to invoke `as'. For details, *note
Comand-Line Options: Invoking..
as [ -a[cdhlns][=file] ] [ -D ] [ --defsym SYM=VAL ]
[ -f ] [ --help ] [ -I DIR ] [ -J ] [ -K ] [ -L ]
[ -o OBJFILE ] [ -R ] [ --statistics ] [ -v ] [ -version ]
[ --version ] [ -W ] [ -w ] [ -x ] [ -Z ]
[ -O ]
[ -Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite | -Av9 | -Av9a ]
[ -xarch=v8plus | -xarch=v8plusa ] [ -bump ]
[ -ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC | -AMC ]
[ -b ] [ -no-relax ]
[ -l ] [ -m68000 | -m68010 | -m68020 | ... ]
[ -nocpp ] [ -EL ] [ -EB ] [ -G NUM ] [ -mcpu=CPU ]
[ -mips1 ] [ -mips2 ] [ -mips3 ] [ -m4650 ] [ -no-m4650 ]
[ --trap ] [ --break ]
[ --emulation=NAME ]
[ -- | FILES ... ]
`-a[dhlns]'
Turn on listings, in any of a variety of ways:
`-ad'
omit debugging directives
`-ah'
include high-level source
`-al'
include assembly
`-an'
omit forms processing
`-as'
include symbols
`=file'
set the name of the listing file
You may combine these options; for example, use `-aln' for assembly
listing without forms processing. The `=file' option, if used,
must be the last one. By itself, `-a' defaults to `-ahls'--that
is, all listings turned on.
`-D'
Ignored. This option is accepted for script compatibility with
calls to other assemblers.
`--defsym SYM=VALUE'
Define the symbol SYM to be VALUE before assembling the input file.
VALUE must be an integer constant. As in C, a leading `0x'
indicates a hexadecimal value, and a leading `0' indicates an
octal value.
`-f'
"fast"--skip whitespace and comment preprocessing (assume source is
compiler output).
`--help'
Print a summary of the command line options and exit.
`-I DIR'
Add directory DIR to the search list for `.include' directives.
`-J'
Don't warn about signed overflow.
`-K'
Issue warnings when difference tables altered for long
displacements.
`-L'
Keep (in the symbol table) local symbols, starting with `L'.
`-o OBJFILE'
Name the object-file output from `as' OBJFILE.
`-R'
Fold the data section into the text section.
`--statistics'
Print the maximum space (in bytes) and total time (in seconds)
used by assembly.
`-v'
`-version'
Print the `as' version.
`--version'
Print the `as' version and exit.
`-W'
Suppress warning messages.
`-w'
Ignored.
`-x'
Ignored.
`-Z'
Generate an object file even after errors.
`-- | FILES ...'
Standard input, or source files to assemble.
The following options are available when as is configured for a D10V
processor.
`-O'
Optimize output by parallelizing instructions.
The following options are available when as is configured for the
Intel 80960 processor.
`-ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC | -AMC'
Specify which variant of the 960 architecture is the target.
`-b'
Add code to collect statistics about branches taken.
`-no-relax'
Do not alter compare-and-branch instructions for long
displacements; error if necessary.
The following options are available when as is configured for the
Motorola 68000 series.
`-l'
Shorten references to undefined symbols, to one word instead of
two.
`-m68000 | -m68008 | -m68010 | -m68020 | -m68030 | -m68040 | -m68060'
`| -m68302 | -m68331 | -m68332 | -m68333 | -m68340 | -mcpu32 | -m5200'
Specify what processor in the 68000 family is the target. The
default is normally the 68020, but this can be changed at
configuration time.
`-m68881 | -m68882 | -mno-68881 | -mno-68882'
The target machine does (or does not) have a floating-point
coprocessor. The default is to assume a coprocessor for 68020,
68030, and cpu32. Although the basic 68000 is not compatible with
the 68881, a combination of the two can be specified, since it's
possible to do emulation of the coprocessor instructions with the
main processor.
`-m68851 | -mno-68851'
The target machine does (or does not) have a memory-management
unit coprocessor. The default is to assume an MMU for 68020 and
up.
The following options are available when `as' is configured for the
SPARC architecture:
`-Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite | -Av9 | -Av9a'
Explicitly select a variant of the SPARC architecture.
`-xarch=v8plus | -xarch=v8plusa'
For compatibility with the Solaris v9 assembler. These options are
equivalent to -Av9 and -Av9a, respectively.
`-bump'
Warn when the assembler switches to another architecture.
The following options are available when as is configured for a MIPS
processor.
`-G NUM'
This option sets the largest size of an object that can be
referenced implicitly with the `gp' register. It is only accepted
for targets that use ECOFF format, such as a DECstation running
Ultrix. The default value is 8.
`-EB'
Generate "big endian" format output.
`-EL'
Generate "little endian" format output.
`-mips1'
`-mips2'
`-mips3'
Generate code for a particular MIPS Instruction Set Architecture
level. `-mips1' corresponds to the R2000 and R3000 processors,
`-mips2' to the R6000 processor, and `-mips3' to the R4000
processor.
`-m4650'
`-no-m4650'
Generate code for the MIPS R4650 chip. This tells the assembler
to accept the `mad' and `madu' instruction, and to not schedule
`nop' instructions around accesses to the `HI' and `LO' registers.
`-no-m4650' turns off this option.
`-mcpu=CPU'
Generate code for a particular MIPS cpu. This has little effect
on the assembler, but it is passed by `gcc'.
`--emulation=NAME'
This option causes `as' to emulated `as' configured for some other
target, in all respects, including output format (choosing between
ELF and ECOFF only), handling of pseudo-opcodes which may generate
debugging information or store symbol table information, and
default endianness. The available configuration names are:
`mipsecoff', `mipself', `mipslecoff', `mipsbecoff', `mipslelf',
`mipsbelf'. The first two do not alter the default endianness
from that of the primary target for which the assembler was
configured; the others change the default to little- or big-endian
as indicated by the `b' or `l' in the name. Using `-EB' or `-EL'
will override the endianness selection in any case.
This option is currently supported only when the primary target
`as' is configured for is a MIPS ELF or ECOFF target.
Furthermore, the primary target or others specified with
`--enable-targets=...' at configuration time must include support
for the other format, if both are to be available. For example,
the Irix 5 configuration includes support for both.
Eventually, this option will support more configurations, with more
fine-grained control over the assembler's behavior, and will be
supported for more processors.
`-nocpp'
`as' ignores this option. It is accepted for compatibility with
the native tools.
`--trap'
`--no-trap'
`--break'
`--no-break'
Control how to deal with multiplication overflow and division by
zero. `--trap' or `--no-break' (which are synonyms) take a trap
exception (and only work for Instruction Set Architecture level 2
and higher); `--break' or `--no-trap' (also synonyms, and the
default) take a break exception.
* Menu:
* Manual:: Structure of this Manual
* GNU Assembler:: The GNU Assembler
* Object Formats:: Object File Formats
* Command Line:: Command Line
* Input Files:: Input Files
* Object:: Output (Object) File
* Errors:: Error and Warning Messages

File: as.info, Node: Manual, Next: GNU Assembler, Up: Overview
Structure of this Manual
========================
This manual is intended to describe what you need to know to use GNU
`as'. We cover the syntax expected in source files, including notation
for symbols, constants, and expressions; the directives that `as'
understands; and of course how to invoke `as'.
This manual also describes some of the machine-dependent features of
various flavors of the assembler.
On the other hand, this manual is *not* intended as an introduction
to programming in assembly language--let alone programming in general!
In a similar vein, we make no attempt to introduce the machine
architecture; we do *not* describe the instruction set, standard
mnemonics, registers or addressing modes that are standard to a
particular architecture. You may want to consult the manufacturer's
machine architecture manual for this information.

File: as.info, Node: GNU Assembler, Next: Object Formats, Prev: Manual, Up: Overview
The GNU Assembler
=================
GNU `as' is really a family of assemblers. If you use (or have
used) the GNU assembler on one architecture, you should find a fairly
similar environment when you use it on another architecture. Each
version has much in common with the others, including object file
formats, most assembler directives (often called "pseudo-ops") and
assembler syntax.
`as' is primarily intended to assemble the output of the GNU C
compiler `gcc' for use by the linker `ld'. Nevertheless, we've tried
to make `as' assemble correctly everything that other assemblers for
the same machine would assemble. Any exceptions are documented
explicitly (*note Machine Dependencies::.). This doesn't mean `as'
always uses the same syntax as another assembler for the same
architecture; for example, we know of several incompatible versions of
680x0 assembly language syntax.
Unlike older assemblers, `as' is designed to assemble a source
program in one pass of the source file. This has a subtle impact on the
`.org' directive (*note `.org': Org.).

File: as.info, Node: Object Formats, Next: Command Line, Prev: GNU Assembler, Up: Overview
Object File Formats
===================
The GNU assembler can be configured to produce several alternative
object file formats. For the most part, this does not affect how you
write assembly language programs; but directives for debugging symbols
are typically different in different file formats. *Note Symbol
Attributes: Symbol Attributes.

File: as.info, Node: Command Line, Next: Input Files, Prev: Object Formats, Up: Overview
Command Line
============
After the program name `as', the command line may contain options
and file names. Options may appear in any order, and may be before,
after, or between file names. The order of file names is significant.
`--' (two hyphens) by itself names the standard input file
explicitly, as one of the files for `as' to assemble.
Except for `--' any command line argument that begins with a hyphen
(`-') is an option. Each option changes the behavior of `as'. No
option changes the way another option works. An option is a `-'
followed by one or more letters; the case of the letter is important.
All options are optional.
Some options expect exactly one file name to follow them. The file
name may either immediately follow the option's letter (compatible with
older assemblers) or it may be the next command argument (GNU
standard). These two command lines are equivalent:
as -o my-object-file.o mumble.s
as -omy-object-file.o mumble.s

File: as.info, Node: Input Files, Next: Object, Prev: Command Line, Up: Overview
Input Files
===========
We use the phrase "source program", abbreviated "source", to
describe the program input to one run of `as'. The program may be in
one or more files; how the source is partitioned into files doesn't
change the meaning of the source.
The source program is a concatenation of the text in all the files,
in the order specified.
Each time you run `as' it assembles exactly one source program. The
source program is made up of one or more files. (The standard input is
also a file.)
You give `as' a command line that has zero or more input file names.
The input files are read (from left file name to right). A command
line argument (in any position) that has no special meaning is taken to
be an input file name.
If you give `as' no file names it attempts to read one input file
from the `as' standard input, which is normally your terminal. You may
have to type ctl-D to tell `as' there is no more program to assemble.
Use `--' if you need to explicitly name the standard input file in
your command line.
If the source is empty, `as' produces a small, empty object file.
Filenames and Line-numbers
--------------------------
There are two ways of locating a line in the input file (or files)
and either may be used in reporting error messages. One way refers to
a line number in a physical file; the other refers to a line number in a
"logical" file. *Note Error and Warning Messages: Errors.
"Physical files" are those files named in the command line given to
`as'.
"Logical files" are simply names declared explicitly by assembler
directives; they bear no relation to physical files. Logical file names
help error messages reflect the original source file, when `as' source
is itself synthesized from other files. *Note `.app-file': App-File.

File: as.info, Node: Object, Next: Errors, Prev: Input Files, Up: Overview
Output (Object) File
====================
Every time you run `as' it produces an output file, which is your
assembly language program translated into numbers. This file is the
object file. Its default name is `a.out', or `b.out' when `as' is
configured for the Intel 80960. You can give it another name by using
the `-o' option. Conventionally, object file names end with `.o'. The
default name is used for historical reasons: older assemblers were
capable of assembling self-contained programs directly into a runnable
program. (For some formats, this isn't currently possible, but it can
be done for the `a.out' format.)
The object file is meant for input to the linker `ld'. It contains
assembled program code, information to help `ld' integrate the
assembled program into a runnable file, and (optionally) symbolic
information for the debugger.

File: as.info, Node: Errors, Prev: Object, Up: Overview
Error and Warning Messages
==========================
`as' may write warnings and error messages to the standard error
file (usually your terminal). This should not happen when a compiler
runs `as' automatically. Warnings report an assumption made so that
`as' could keep assembling a flawed program; errors report a grave
problem that stops the assembly.
Warning messages have the format
file_name:NNN:Warning Message Text
(where NNN is a line number). If a logical file name has been given
(*note `.app-file': App-File.) it is used for the filename, otherwise
the name of the current input file is used. If a logical line number
was given (*note `.line': Line.) then it is used to calculate the
number printed, otherwise the actual line in the current source file is
printed. The message text is intended to be self explanatory (in the
grand Unix tradition).
Error messages have the format
file_name:NNN:FATAL:Error Message Text
The file name and line number are derived as for warning messages.
The actual message text may be rather less explanatory because many of
them aren't supposed to happen.

File: as.info, Node: Invoking, Next: Syntax, Prev: Overview, Up: Top
Command-Line Options
********************
This chapter describes command-line options available in *all*
versions of the GNU assembler; *note Machine Dependencies::., for
options specific to particular machine architectures.
If you are invoking `as' via the GNU C compiler (version 2), you can
use the `-Wa' option to pass arguments through to the assembler. The
assembler arguments must be separated from each other (and the `-Wa')
by commas. For example:
gcc -c -g -O -Wa,-alh,-L file.c
emits a listing to standard output with high-level and assembly source.
Usually you do not need to use this `-Wa' mechanism, since many
compiler command-line options are automatically passed to the assembler
by the compiler. (You can call the GNU compiler driver with the `-v'
option to see precisely what options it passes to each compilation
pass, including the assembler.)
* Menu:
* a:: -a[cdhlns] enable listings
* D:: -D for compatibility
* f:: -f to work faster
* I:: -I for .include search path
* K:: -K for difference tables
* L:: -L to retain local labels
* M:: -M or -mri to assemble in MRI compatibility mode
* o:: -o to name the object file
* R:: -R to join data and text sections
* statistics:: -statistics to see statistics about assembly
* v:: -v to announce version
* W:: -W to suppress warnings
* Z:: -Z to make object file even after errors

File: as.info, Node: a, Next: D, Up: Invoking
Enable Listings: `-a[cdhlns]'
=============================
These options enable listing output from the assembler. By itself,
`-a' requests high-level, assembly, and symbols listing. You can use
other letters to select specific options for the list: `-ah' requests a
high-level language listing, `-al' requests an output-program assembly
listing, and `-as' requests a symbol table listing. High-level
listings require that a compiler debugging option like `-g' be used,
and that assembly listings (`-al') be requested also.
Use the `-ac' option to omit false conditionals from a listing. Any
lines which are not assembled because of a false `.if' (or `.ifdef', or
any other conditional), or a true `.if' followed by an `.else', will be
omitted from the listing.
Use the `-ad' option to omit debugging directives from the listing.
Once you have specified one of these options, you can further control
listing output and its appearance using the directives `.list',
`.nolist', `.psize', `.eject', `.title', and `.sbttl'. The `-an'
option turns off all forms processing. If you do not request listing
output with one of the `-a' options, the listing-control directives
have no effect.
The letters after `-a' may be combined into one option, *e.g.*,
`-aln'.

File: as.info, Node: D, Next: f, Prev: a, Up: Invoking
`-D'
====
This option has no effect whatsoever, but it is accepted to make it
more likely that scripts written for other assemblers also work with
`as'.

File: as.info, Node: f, Next: I, Prev: D, Up: Invoking
Work Faster: `-f'
=================
`-f' should only be used when assembling programs written by a
(trusted) compiler. `-f' stops the assembler from doing whitespace and
comment preprocessing on the input file(s) before assembling them.
*Note Preprocessing: Preprocessing.
*Warning:* if you use `-f' when the files actually need to be
preprocessed (if they contain comments, for example), `as' does
not work correctly.

File: as.info, Node: I, Next: K, Prev: f, Up: Invoking
`.include' search path: `-I' PATH
=================================
Use this option to add a PATH to the list of directories `as'
searches for files specified in `.include' directives (*note
`.include': Include.). You may use `-I' as many times as necessary to
include a variety of paths. The current working directory is always
searched first; after that, `as' searches any `-I' directories in the
same order as they were specified (left to right) on the command line.

File: as.info, Node: K, Next: L, Prev: I, Up: Invoking
Difference Tables: `-K'
=======================
`as' sometimes alters the code emitted for directives of the form
`.word SYM1-SYM2'; *note `.word': Word.. You can use the `-K' option
if you want a warning issued when this is done.

File: as.info, Node: L, Next: M, Prev: K, Up: Invoking
Include Local Labels: `-L'
==========================
Labels beginning with `L' (upper case only) are called "local
labels". *Note Symbol Names::. Normally you do not see such labels when
debugging, because they are intended for the use of programs (like
compilers) that compose assembler programs, not for your notice.
Normally both `as' and `ld' discard such labels, so you do not normally
debug with them.
This option tells `as' to retain those `L...' symbols in the object
file. Usually if you do this you also tell the linker `ld' to preserve
symbols whose names begin with `L'.
By default, a local label is any label beginning with `L', but each
target is allowed to redefine the local label prefix. On the HPPA
local labels begin with `L$'.

File: as.info, Node: M, Next: o, Prev: L, Up: Invoking
Assemble in MRI Compatibility Mode: `-M'
========================================
The `-M' or `--mri' option selects MRI compatibility mode. This
changes the syntax and pseudo-op handling of `as' to make it compatible
with the `ASM68K' or the `ASM960' (depending upon the configured
target) assembler from Microtec Research. The exact nature of the MRI
syntax will not be documented here; see the MRI manuals for more
information. Note in particular that the handling of macros and macro
arguments is somewhat different. The purpose of this option is to
permit assembling existing MRI assembler code using `as'.
The MRI compatibility is not complete. Certain operations of the
MRI assembler depend upon its object file format, and can not be
supported using other object file formats. Supporting these would
require enhancing each object file format individually. These are:
* global symbols in common section
The m68k MRI assembler supports common sections which are merged
by the linker. Other object file formats do not support this.
`as' handles common sections by treating them as a single common
symbol. It permits local symbols to be defined within a common
section, but it can not support global symbols, since it has no
way to describe them.
* complex relocations
The MRI assemblers support relocations against a negated section
address, and relocations which combine the start addresses of two
or more sections. These are not support by other object file
formats.
* `END' pseudo-op specifying start address
The MRI `END' pseudo-op permits the specification of a start
address. This is not supported by other object file formats. The
start address may instead be specified using the `-e' option to
the linker, or in a linker script.
* `IDNT', `.ident' and `NAME' pseudo-ops
The MRI `IDNT', `.ident' and `NAME' pseudo-ops assign a module
name to the output file. This is not supported by other object
file formats.
* `ORG' pseudo-op
The m68k MRI `ORG' pseudo-op begins an absolute section at a given
address. This differs from the usual `as' `.org' pseudo-op, which
changes the location within the current section. Absolute
sections are not supported by other object file formats. The
address of a section may be assigned within a linker script.
There are some other features of the MRI assembler which are not
supported by `as', typically either because they are difficult or
because they seem of little consequence. Some of these may be
supported in future releases.
* EBCDIC strings
EBCDIC strings are not supported.
* packed binary coded decimal
Packed binary coded decimal is not supported. This means that the
`DC.P' and `DCB.P' pseudo-ops are not supported.
* `FEQU' pseudo-op
The m68k `FEQU' pseudo-op is not supported.
* `NOOBJ' pseudo-op
The m68k `NOOBJ' pseudo-op is not supported.
* `OPT' branch control options
The m68k `OPT' branch control options--`B', `BRS', `BRB', `BRL',
and `BRW'--are ignored. `as' automatically relaxes all branches,
whether forward or backward, to an appropriate size, so these
options serve no purpose.
* `OPT' list control options
The following m68k `OPT' list control options are ignored: `C',
`CEX', `CL', `CRE', `E', `G', `I', `M', `MEX', `MC', `MD', `X'.
* other `OPT' options
The following m68k `OPT' options are ignored: `NEST', `O', `OLD',
`OP', `P', `PCO', `PCR', `PCS', `R'.
* `OPT' `D' option is default
The m68k `OPT' `D' option is the default, unlike the MRI assembler.
`OPT NOD' may be used to turn it off.
* `XREF' pseudo-op.
The m68k `XREF' pseudo-op is ignored.
* `.debug' pseudo-op
The i960 `.debug' pseudo-op is not supported.
* `.extended' pseudo-op
The i960 `.extended' pseudo-op is not supported.
* `.list' pseudo-op.
The various options of the i960 `.list' pseudo-op are not
supported.
* `.optimize' pseudo-op
The i960 `.optimize' pseudo-op is not supported.
* `.output' pseudo-op
The i960 `.output' pseudo-op is not supported.
* `.setreal' pseudo-op
The i960 `.setreal' pseudo-op is not supported.

File: as.info, Node: o, Next: R, Prev: M, Up: Invoking
Name the Object File: `-o'
==========================
There is always one object file output when you run `as'. By
default it has the name `a.out' (or `b.out', for Intel 960 targets
only). You use this option (which takes exactly one filename) to give
the object file a different name.
Whatever the object file is called, `as' overwrites any existing
file of the same name.

File: as.info, Node: R, Next: statistics, Prev: o, Up: Invoking
Join Data and Text Sections: `-R'
=================================
`-R' tells `as' to write the object file as if all data-section data
lives in the text section. This is only done at the very last moment:
your binary data are the same, but data section parts are relocated
differently. The data section part of your object file is zero bytes
long because all its bytes are appended to the text section. (*Note
Sections and Relocation: Sections.)
When you specify `-R' it would be possible to generate shorter
address displacements (because we do not have to cross between text and
data section). We refrain from doing this simply for compatibility with
older versions of `as'. In future, `-R' may work this way.
When `as' is configured for COFF output, this option is only useful
if you use sections named `.text' and `.data'.
`-R' is not supported for any of the HPPA targets. Using `-R'
generates a warning from `as'.

File: as.info, Node: statistics, Next: v, Prev: R, Up: Invoking
Display Assembly Statistics: `--statistics'
===========================================
Use `--statistics' to display two statistics about the resources
used by `as': the maximum amount of space allocated during the assembly
(in bytes), and the total execution time taken for the assembly (in CPU
seconds).

File: as.info, Node: v, Next: W, Prev: statistics, Up: Invoking
Announce Version: `-v'
======================
You can find out what version of as is running by including the
option `-v' (which you can also spell as `-version') on the command
line.

File: as.info, Node: W, Next: Z, Prev: v, Up: Invoking
Suppress Warnings: `-W'
=======================
`as' should never give a warning or error message when assembling
compiler output. But programs written by people often cause `as' to
give a warning that a particular assumption was made. All such
warnings are directed to the standard error file. If you use this
option, no warnings are issued. This option only affects the warning
messages: it does not change any particular of how `as' assembles your
file. Errors, which stop the assembly, are still reported.

File: as.info, Node: Z, Prev: W, Up: Invoking
Generate Object File in Spite of Errors: `-Z'
=============================================
After an error message, `as' normally produces no output. If for
some reason you are interested in object file output even after `as'
gives an error message on your program, use the `-Z' option. If there
are any errors, `as' continues anyways, and writes an object file after
a final warning message of the form `N errors, M warnings, generating
bad object file.'

File: as.info, Node: Syntax, Next: Sections, Prev: Invoking, Up: Top
Syntax
******
This chapter describes the machine-independent syntax allowed in a
source file. `as' syntax is similar to what many other assemblers use;
it is inspired by the BSD 4.2 assembler, except that `as' does not
assemble Vax bit-fields.
* Menu:
* Preprocessing:: Preprocessing
* Whitespace:: Whitespace
* Comments:: Comments
* Symbol Intro:: Symbols
* Statements:: Statements
* Constants:: Constants

File: as.info, Node: Preprocessing, Next: Whitespace, Up: Syntax
Preprocessing
=============
The `as' internal preprocessor:
* adjusts and removes extra whitespace. It leaves one space or tab
before the keywords on a line, and turns any other whitespace on
the line into a single space.
* removes all comments, replacing them with a single space, or an
appropriate number of newlines.
* converts character constants into the appropriate numeric values.
It does not do macro processing, include file handling, or anything
else you may get from your C compiler's preprocessor. You can do
include file processing with the `.include' directive (*note
`.include': Include.). You can use the GNU C compiler driver to get
other "CPP" style preprocessing, by giving the input file a `.S'
suffix. *Note Options Controlling the Kind of Output:
(gcc.info)Overall Options.
Excess whitespace, comments, and character constants cannot be used
in the portions of the input text that are not preprocessed.
If the first line of an input file is `#NO_APP' or if you use the
`-f' option, whitespace and comments are not removed from the input
file. Within an input file, you can ask for whitespace and comment
removal in specific portions of the by putting a line that says `#APP'
before the text that may contain whitespace or comments, and putting a
line that says `#NO_APP' after this text. This feature is mainly
intend to support `asm' statements in compilers whose output is
otherwise free of comments and whitespace.

File: as.info, Node: Whitespace, Next: Comments, Prev: Preprocessing, Up: Syntax
Whitespace
==========
"Whitespace" is one or more blanks or tabs, in any order.
Whitespace is used to separate symbols, and to make programs neater for
people to read. Unless within character constants (*note Character
Constants: Characters.), any whitespace means the same as exactly one
space.

File: as.info, Node: Comments, Next: Symbol Intro, Prev: Whitespace, Up: Syntax
Comments
========
There are two ways of rendering comments to `as'. In both cases the
comment is equivalent to one space.
Anything from `/*' through the next `*/' is a comment. This means
you may not nest these comments.
/*
The only way to include a newline ('\n') in a comment
is to use this sort of comment.
*/
/* This sort of comment does not nest. */
Anything from the "line comment" character to the next newline is
considered a comment and is ignored. The line comment character is `;'
for the AMD 29K family; `;' for the H8/300 family; `!' for the H8/500
family; `;' for the HPPA; `#' on the i960; `!' for the Hitachi SH; `!'
on the SPARC; `|' on the 680x0; `#' on the Vax; `!' for the Z8000; see
*Note Machine Dependencies::.
On some machines there are two different line comment characters.
One character only begins a comment if it is the first non-whitespace
character on a line, while the other always begins a comment.
To be compatible with past assemblers, lines that begin with `#'
have a special interpretation. Following the `#' should be an absolute
expression (*note Expressions::.): the logical line number of the *next*
line. Then a string (*note Strings: Strings.) is allowed: if present
it is a new logical file name. The rest of the line, if any, should be
whitespace.
If the first non-whitespace characters on the line are not numeric,
the line is ignored. (Just like a comment.)
# This is an ordinary comment.
# 42-6 "new_file_name" # New logical file name
# This is logical line # 36.
This feature is deprecated, and may disappear from future versions
of `as'.

File: as.info, Node: Symbol Intro, Next: Statements, Prev: Comments, Up: Syntax
Symbols
=======
A "symbol" is one or more characters chosen from the set of all
letters (both upper and lower case), digits and the three characters
`_.$'. On most machines, you can also use `$' in symbol names;
exceptions are noted in *Note Machine Dependencies::. No symbol may
begin with a digit. Case is significant. There is no length limit:
all characters are significant. Symbols are delimited by characters
not in that set, or by the beginning of a file (since the source
program must end with a newline, the end of a file is not a possible
symbol delimiter). *Note Symbols::.

File: as.info, Node: Statements, Next: Constants, Prev: Symbol Intro, Up: Syntax
Statements
==========
A "statement" ends at a newline character (`\n') or line separator
character. (The line separator is usually `;', unless this conflicts
with the comment character; *note Machine Dependencies::..) The
newline or separator character is considered part of the preceding
statement. Newlines and separators within character constants are an
exception: they do not end statements.
It is an error to end any statement with end-of-file: the last
character of any input file should be a newline.
You may write a statement on more than one line if you put a
backslash (`\') immediately in front of any newlines within the
statement. When `as' reads a backslashed newline both characters are
ignored. You can even put backslashed newlines in the middle of symbol
names without changing the meaning of your source program.
An empty statement is allowed, and may include whitespace. It is
ignored.
A statement begins with zero or more labels, optionally followed by a
key symbol which determines what kind of statement it is. The key
symbol determines the syntax of the rest of the statement. If the
symbol begins with a dot `.' then the statement is an assembler
directive: typically valid for any computer. If the symbol begins with
a letter the statement is an assembly language "instruction": it
assembles into a machine language instruction. Different versions of
`as' for different computers recognize different instructions. In
fact, the same symbol may represent a different instruction in a
different computer's assembly language.
A label is a symbol immediately followed by a colon (`:').
Whitespace before a label or after a colon is permitted, but you may not
have whitespace between a label's symbol and its colon. *Note Labels::.
For HPPA targets, labels need not be immediately followed by a
colon, but the definition of a label must begin in column zero. This
also implies that only one label may be defined on each line.
label: .directive followed by something
another_label: # This is an empty statement.
instruction operand_1, operand_2, ...

File: as.info, Node: Constants, Prev: Statements, Up: Syntax
Constants
=========
A constant is a number, written so that its value is known by
inspection, without knowing any context. Like this:
.byte 74, 0112, 092, 0x4A, 0X4a, 'J, '\J # All the same value.
.ascii "Ring the bell\7" # A string constant.
.octa 0x123456789abcdef0123456789ABCDEF0 # A bignum.
.float 0f-314159265358979323846264338327\
95028841971.693993751E-40 # - pi, a flonum.
* Menu:
* Characters:: Character Constants
* Numbers:: Number Constants

File: as.info, Node: Characters, Next: Numbers, Up: Constants
Character Constants
-------------------
There are two kinds of character constants. A "character" stands
for one character in one byte and its value may be used in numeric
expressions. String constants (properly called string *literals*) are
potentially many bytes and their values may not be used in arithmetic
expressions.
* Menu:
* Strings:: Strings
* Chars:: Characters

File: as.info, Node: Strings, Next: Chars, Up: Characters
Strings
.......
A "string" is written between double-quotes. It may contain
double-quotes or null characters. The way to get special characters
into a string is to "escape" these characters: precede them with a
backslash `\' character. For example `\\' represents one backslash:
the first `\' is an escape which tells `as' to interpret the second
character literally as a backslash (which prevents `as' from
recognizing the second `\' as an escape character). The complete list
of escapes follows.
`\b'
Mnemonic for backspace; for ASCII this is octal code 010.
`\f'
Mnemonic for FormFeed; for ASCII this is octal code 014.
`\n'
Mnemonic for newline; for ASCII this is octal code 012.
`\r'
Mnemonic for carriage-Return; for ASCII this is octal code 015.
`\t'
Mnemonic for horizontal Tab; for ASCII this is octal code 011.
`\ DIGIT DIGIT DIGIT'
An octal character code. The numeric code is 3 octal digits. For
compatibility with other Unix systems, 8 and 9 are accepted as
digits: for example, `\008' has the value 010, and `\009' the
value 011.
`\`x' HEX-DIGITS...'
A hex character code. All trailing hex digits are combined.
Either upper or lower case `x' works.
`\\'
Represents one `\' character.
`\"'
Represents one `"' character. Needed in strings to represent this
character, because an unescaped `"' would end the string.
`\ ANYTHING-ELSE'
Any other character when escaped by `\' gives a warning, but
assembles as if the `\' was not present. The idea is that if you
used an escape sequence you clearly didn't want the literal
interpretation of the following character. However `as' has no
other interpretation, so `as' knows it is giving you the wrong
code and warns you of the fact.
Which characters are escapable, and what those escapes represent,
varies widely among assemblers. The current set is what we think the
BSD 4.2 assembler recognizes, and is a subset of what most C compilers
recognize. If you are in doubt, do not use an escape sequence.

File: as.info, Node: Chars, Prev: Strings, Up: Characters
Characters
..........
A single character may be written as a single quote immediately
followed by that character. The same escapes apply to characters as to
strings. So if you want to write the character backslash, you must
write `'\\' where the first `\' escapes the second `\'. As you can
see, the quote is an acute accent, not a grave accent. A newline
immediately following an acute accent is taken as a literal character
and does not count as the end of a statement. The value of a character
constant in a numeric expression is the machine's byte-wide code for
that character. `as' assumes your character code is ASCII: `'A' means
65, `'B' means 66, and so on.

File: as.info, Node: Numbers, Prev: Characters, Up: Constants
Number Constants
----------------
`as' distinguishes three kinds of numbers according to how they are
stored in the target machine. *Integers* are numbers that would fit
into an `int' in the C language. *Bignums* are integers, but they are
stored in more than 32 bits. *Flonums* are floating point numbers,
described below.
* Menu:
* Integers:: Integers
* Bignums:: Bignums
* Flonums:: Flonums

File: as.info, Node: Integers, Next: Bignums, Up: Numbers
Integers
........
A binary integer is `0b' or `0B' followed by zero or more of the
binary digits `01'.
An octal integer is `0' followed by zero or more of the octal digits
(`01234567').
A decimal integer starts with a non-zero digit followed by zero or
more digits (`0123456789').
A hexadecimal integer is `0x' or `0X' followed by one or more
hexadecimal digits chosen from `0123456789abcdefABCDEF'.
Integers have the usual values. To denote a negative integer, use
the prefix operator `-' discussed under expressions (*note Prefix
Operators: Prefix Ops.).

File: as.info, Node: Bignums, Next: Flonums, Prev: Integers, Up: Numbers
Bignums
.......
A "bignum" has the same syntax and semantics as an integer except
that the number (or its negative) takes more than 32 bits to represent
in binary. The distinction is made because in some places integers are
permitted while bignums are not.

File: as.info, Node: Flonums, Prev: Bignums, Up: Numbers
Flonums
.......
A "flonum" represents a floating point number. The translation is
indirect: a decimal floating point number from the text is converted by
`as' to a generic binary floating point number of more than sufficient
precision. This generic floating point number is converted to a
particular computer's floating point format (or formats) by a portion
of `as' specialized to that computer.
A flonum is written by writing (in order)
* The digit `0'. (`0' is optional on the HPPA.)
* A letter, to tell `as' the rest of the number is a flonum. `e' is
recommended. Case is not important.
On the H8/300, H8/500, Hitachi SH, and AMD 29K architectures, the
letter must be one of the letters `DFPRSX' (in upper or lower
case).
On the Intel 960 architecture, the letter must be one of the
letters `DFT' (in upper or lower case).
On the HPPA architecture, the letter must be `E' (upper case only).
* An optional sign: either `+' or `-'.
* An optional "integer part": zero or more decimal digits.
* An optional "fractional part": `.' followed by zero or more
decimal digits.
* An optional exponent, consisting of:
* An `E' or `e'.
* Optional sign: either `+' or `-'.
* One or more decimal digits.
At least one of the integer part or the fractional part must be
present. The floating point number has the usual base-10 value.
`as' does all processing using integers. Flonums are computed
independently of any floating point hardware in the computer running
`as'.

File: as.info, Node: Sections, Next: Symbols, Prev: Syntax, Up: Top
Sections and Relocation
***********************
* Menu:
* Secs Background:: Background
* Ld Sections:: Linker Sections
* As Sections:: Assembler Internal Sections
* Sub-Sections:: Sub-Sections
* bss:: bss Section

File: as.info, Node: Secs Background, Next: Ld Sections, Up: Sections
Background
==========
Roughly, a section is a range of addresses, with no gaps; all data
"in" those addresses is treated the same for some particular purpose.
For example there may be a "read only" section.
The linker `ld' reads many object files (partial programs) and
combines their contents to form a runnable program. When `as' emits an
object file, the partial program is assumed to start at address 0.
`ld' assigns the final addresses for the partial program, so that
different partial programs do not overlap. This is actually an
oversimplification, but it suffices to explain how `as' uses sections.
`ld' moves blocks of bytes of your program to their run-time
addresses. These blocks slide to their run-time addresses as rigid
units; their length does not change and neither does the order of bytes
within them. Such a rigid unit is called a *section*. Assigning
run-time addresses to sections is called "relocation". It includes the
task of adjusting mentions of object-file addresses so they refer to
the proper run-time addresses. For the H8/300 and H8/500, and for the
Hitachi SH, `as' pads sections if needed to ensure they end on a word
(sixteen bit) boundary.
An object file written by `as' has at least three sections, any of
which may be empty. These are named "text", "data" and "bss" sections.
When it generates COFF output, `as' can also generate whatever other
named sections you specify using the `.section' directive (*note
`.section': Section.). If you do not use any directives that place
output in the `.text' or `.data' sections, these sections still exist,
but are empty.
When `as' generates SOM or ELF output for the HPPA, `as' can also
generate whatever other named sections you specify using the `.space'
and `.subspace' directives. See `HP9000 Series 800 Assembly Language
Reference Manual' (HP 92432-90001) for details on the `.space' and
`.subspace' assembler directives.
Additionally, `as' uses different names for the standard text, data,
and bss sections when generating SOM output. Program text is placed
into the `$CODE$' section, data into `$DATA$', and BSS into `$BSS$'.
Within the object file, the text section starts at address `0', the
data section follows, and the bss section follows the data section.
When generating either SOM or ELF output files on the HPPA, the text
section starts at address `0', the data section at address `0x4000000',
and the bss section follows the data section.
To let `ld' know which data changes when the sections are relocated,
and how to change that data, `as' also writes to the object file
details of the relocation needed. To perform relocation `ld' must
know, each time an address in the object file is mentioned:
* Where in the object file is the beginning of this reference to an
address?
* How long (in bytes) is this reference?
* Which section does the address refer to? What is the numeric
value of
(ADDRESS) - (START-ADDRESS OF SECTION)?
* Is the reference to an address "Program-Counter relative"?
In fact, every address `as' ever uses is expressed as
(SECTION) + (OFFSET INTO SECTION)
Further, most expressions `as' computes have this section-relative
nature. (For some object formats, such as SOM for the HPPA, some
expressions are symbol-relative instead.)
In this manual we use the notation {SECNAME N} to mean "offset N
into section SECNAME."
Apart from text, data and bss sections you need to know about the
"absolute" section. When `ld' mixes partial programs, addresses in the
absolute section remain unchanged. For example, address `{absolute 0}'
is "relocated" to run-time address 0 by `ld'. Although the linker
never arranges two partial programs' data sections with overlapping
addresses after linking, *by definition* their absolute sections must
overlap. Address `{absolute 239}' in one part of a program is always
the same address when the program is running as address `{absolute
239}' in any other part of the program.
The idea of sections is extended to the "undefined" section. Any
address whose section is unknown at assembly time is by definition
rendered {undefined U}--where U is filled in later. Since numbers are
always defined, the only way to generate an undefined address is to
mention an undefined symbol. A reference to a named common block would
be such a symbol: its value is unknown at assembly time so it has
section *undefined*.
By analogy the word *section* is used to describe groups of sections
in the linked program. `ld' puts all partial programs' text sections
in contiguous addresses in the linked program. It is customary to
refer to the *text section* of a program, meaning all the addresses of
all partial programs' text sections. Likewise for data and bss
sections.
Some sections are manipulated by `ld'; others are invented for use
of `as' and have no meaning except during assembly.