Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7fdb60e126
NetBSD/sys/dev/pcmcia/if_xi.c
mycroft f881dcb9b2 Remove the "known bugs" section. I've fixed both of them. 
Use tsleep() rather than delay().  XXX Most of these are probably unnecessary
anyway.  In particular, I believe that what xi_full_reset() does is totally
gratuitous after power-cycling the socket; it should only be necessary if we
want to use power-saving mode.
2004-08-12 18:23:50 +00:00

1309 lines
32 KiB
C
Raw Blame History

/* $NetBSD: if_xi.c,v 1.47 2004/08/12 18:23:50 mycroft Exp $ */
/* OpenBSD: if_xe.c,v 1.9 1999/09/16 11:28:42 niklas Exp */
/*
* Copyright (c) 2004 Charles M. Hannum. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Charles M. Hannum.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*/
/*
* Copyright (c) 1999 Niklas Hallqvist, Brandon Creighton, Job de Haas
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Niklas Hallqvist,
* Brandon Creighton and Job de Haas.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* A driver for Xircom CreditCard PCMCIA Ethernet adapters.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_xi.c,v 1.47 2004/08/12 18:23:50 mycroft Exp $");
#include "opt_inet.h"
#include "opt_ipx.h"
#include "bpfilter.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/ioctl.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/socket.h>
#include <sys/kernel.h>
#include <sys/proc.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/if_ether.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_inarp.h>
#endif
#ifdef IPX
#include <netipx/ipx.h>
#include <netipx/ipx_if.h>
#endif
#ifdef NS
#include <netns/ns.h>
#include <netns/ns_if.h>
#endif
#if NBPFILTER > 0
#include <net/bpf.h>
#include <net/bpfdesc.h>
#endif
/*
* Maximum number of bytes to read per interrupt. Linux recommends
* somewhere between 2000-22000.
* XXX This is currently a hard maximum.
*/
#define MAX_BYTES_INTR 12000
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/pcmcia/pcmciareg.h>
#include <dev/pcmcia/pcmciavar.h>
#include <dev/pcmcia/pcmciadevs.h>
#include <dev/pcmcia/if_xireg.h>
#include <dev/pcmcia/if_xivar.h>
#ifdef __GNUC__
#define INLINE __inline
#else
#define INLINE
#endif /* __GNUC__ */
#define XIDEBUG
#define XIDEBUG_VALUE 0
#ifdef XIDEBUG
#define DPRINTF(cat, x) if (xidebug & (cat)) printf x
#define XID_CONFIG 0x01
#define XID_MII 0x02
#define XID_INTR 0x04
#define XID_FIFO 0x08
#define XID_MCAST 0x10
#ifdef XIDEBUG_VALUE
int xidebug = XIDEBUG_VALUE;
#else
int xidebug = 0;
#endif
#else
#define DPRINTF(cat, x) (void)0
#endif
#define STATIC
STATIC int xi_enable __P((struct xi_softc *));
STATIC void xi_disable __P((struct xi_softc *));
STATIC void xi_cycle_power __P((struct xi_softc *));
STATIC int xi_ether_ioctl __P((struct ifnet *, u_long cmd, caddr_t));
STATIC void xi_full_reset __P((struct xi_softc *));
STATIC void xi_init __P((struct xi_softc *));
STATIC int xi_ioctl __P((struct ifnet *, u_long, caddr_t));
STATIC int xi_mdi_read __P((struct device *, int, int));
STATIC void xi_mdi_write __P((struct device *, int, int, int));
STATIC int xi_mediachange __P((struct ifnet *));
STATIC void xi_mediastatus __P((struct ifnet *, struct ifmediareq *));
STATIC u_int16_t xi_get __P((struct xi_softc *));
STATIC void xi_reset __P((struct xi_softc *));
STATIC void xi_set_address __P((struct xi_softc *));
STATIC void xi_start __P((struct ifnet *));
STATIC void xi_statchg __P((struct device *));
STATIC void xi_stop __P((struct xi_softc *));
STATIC void xi_watchdog __P((struct ifnet *));
void
xi_attach(sc, myea)
struct xi_softc *sc;
u_int8_t *myea;
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
#if 0
/*
* Configuration as advised by DINGO documentation.
* Dingo has some extra configuration registers in the CCR space.
*/
if (sc->sc_chipset >= XI_CHIPSET_DINGO) {
struct pcmcia_mem_handle pcmh;
int ccr_window;
bus_size_t ccr_offset;
/* get access to the DINGO CCR space */
if (pcmcia_mem_alloc(psc->sc_pf, PCMCIA_CCR_SIZE_DINGO,
&pcmh)) {
DPRINTF(XID_CONFIG, ("xi: bad mem alloc\n"));
goto fail;
}
if (pcmcia_mem_map(psc->sc_pf, PCMCIA_MEM_ATTR,
psc->sc_pf->ccr_base, PCMCIA_CCR_SIZE_DINGO,
&pcmh, &ccr_offset, &ccr_window)) {
DPRINTF(XID_CONFIG, ("xi: bad mem map\n"));
pcmcia_mem_free(psc->sc_pf, &pcmh);
goto fail;
}
/* enable the second function - usually modem */
bus_space_write_1(pcmh.memt, pcmh.memh,
ccr_offset + PCMCIA_CCR_DCOR0, PCMCIA_CCR_DCOR0_SFINT);
bus_space_write_1(pcmh.memt, pcmh.memh,
ccr_offset + PCMCIA_CCR_DCOR1,
PCMCIA_CCR_DCOR1_FORCE_LEVIREQ | PCMCIA_CCR_DCOR1_D6);
bus_space_write_1(pcmh.memt, pcmh.memh,
ccr_offset + PCMCIA_CCR_DCOR2, 0);
bus_space_write_1(pcmh.memt, pcmh.memh,
ccr_offset + PCMCIA_CCR_DCOR3, 0);
bus_space_write_1(pcmh.memt, pcmh.memh,
ccr_offset + PCMCIA_CCR_DCOR4, 0);
/* We don't need them anymore and can free them (I think). */
pcmcia_mem_unmap(psc->sc_pf, ccr_window);
pcmcia_mem_free(psc->sc_pf, &pcmh);
}
#endif
/* Reset and initialize the card. */
xi_full_reset(sc);
printf("%s: MAC address %s\n", sc->sc_dev.dv_xname, ether_sprintf(myea));
ifp = &sc->sc_ethercom.ec_if;
/* Initialize the ifnet structure. */
strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
ifp->if_softc = sc;
ifp->if_start = xi_start;
ifp->if_ioctl = xi_ioctl;
ifp->if_watchdog = xi_watchdog;
ifp->if_flags =
IFF_BROADCAST | IFF_NOTRAILERS | IFF_SIMPLEX | IFF_MULTICAST;
IFQ_SET_READY(&ifp->if_snd);
/* 802.1q capability */
sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU;
/* Attach the interface. */
if_attach(ifp);
ether_ifattach(ifp, myea);
/*
* Initialize our media structures and probe the MII.
*/
sc->sc_mii.mii_ifp = ifp;
sc->sc_mii.mii_readreg = xi_mdi_read;
sc->sc_mii.mii_writereg = xi_mdi_write;
sc->sc_mii.mii_statchg = xi_statchg;
ifmedia_init(&sc->sc_mii.mii_media, 0, xi_mediachange,
xi_mediastatus);
DPRINTF(XID_MII | XID_CONFIG,
("xi: bmsr %x\n", xi_mdi_read(&sc->sc_dev, 0, 1)));
mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
MII_OFFSET_ANY, 0);
if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL)
ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER | IFM_AUTO, 0,
NULL);
ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER | IFM_AUTO);
#if NRND > 0
rnd_attach_source(&sc->sc_rnd_source, sc->sc_dev.dv_xname, RND_TYPE_NET, 0);
#endif
}
int
xi_detach(self, flags)
struct device *self;
int flags;
{
struct xi_softc *sc = (void *)self;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
DPRINTF(XID_CONFIG, ("xi_detach()\n"));
xi_disable(sc);
#if NRND > 0
rnd_detach_source(&sc->sc_rnd_source);
#endif
mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY);
ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY);
ether_ifdetach(ifp);
if_detach(ifp);
return 0;
}
int
xi_activate(self, act)
struct device *self;
enum devact act;
{
struct xi_softc *sc = (void *)self;
int s, rv = 0;
DPRINTF(XID_CONFIG, ("xi_activate()\n"));
s = splnet();
switch (act) {
case DVACT_ACTIVATE:
rv = EOPNOTSUPP;
break;
case DVACT_DEACTIVATE:
if_deactivate(&sc->sc_ethercom.ec_if);
break;
}
splx(s);
return (rv);
}
int
xi_intr(arg)
void *arg;
{
struct xi_softc *sc = arg;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
u_int8_t esr, rsr, isr, rx_status;
u_int16_t tx_status, recvcount = 0, tempint;
DPRINTF(XID_CONFIG, ("xi_intr()\n"));
if (sc->sc_enabled == 0 ||
(sc->sc_dev.dv_flags & DVF_ACTIVE) == 0)
return (0);
ifp->if_timer = 0; /* turn watchdog timer off */
PAGE(sc, 0);
if (sc->sc_chipset >= XI_CHIPSET_MOHAWK) {
/* Disable interrupt (Linux does it). */
bus_space_write_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + CR,
0);
}
esr = bus_space_read_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + ESR);
isr = bus_space_read_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + ISR0);
rsr = bus_space_read_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + RSR);
/* Check to see if card has been ejected. */
if (isr == 0xff) {
#ifdef DIAGNOSTIC
printf("%s: interrupt for dead card\n", sc->sc_dev.dv_xname);
#endif
goto end;
}
DPRINTF(XID_INTR, ("xi: isr=%02x\n", isr));
PAGE(sc, 0x40);
rx_status =
bus_space_read_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + RXST0);
bus_space_write_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + RXST0,
~rx_status & 0xff);
tx_status =
bus_space_read_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + TXST0);
tx_status |=
bus_space_read_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + TXST1) << 8;
bus_space_write_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + TXST0,0);
bus_space_write_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + TXST1,0);
DPRINTF(XID_INTR, ("xi: rx_status=%02x tx_status=%04x\n", rx_status,
tx_status));
PAGE(sc, 0);
while (esr & FULL_PKT_RCV) {
if (!(rsr & RSR_RX_OK))
break;
/* Compare bytes read this interrupt to hard maximum. */
if (recvcount > MAX_BYTES_INTR) {
DPRINTF(XID_INTR,
("xi: too many bytes this interrupt\n"));
ifp->if_iqdrops++;
/* Drop packet. */
bus_space_write_2(sc->sc_bst, sc->sc_bsh,
sc->sc_offset + DO0, DO_SKIP_RX_PKT);
}
tempint = xi_get(sc); /* XXX doesn't check the error! */
recvcount += tempint;
ifp->if_ibytes += tempint;
esr = bus_space_read_1(sc->sc_bst, sc->sc_bsh,
sc->sc_offset + ESR);
rsr = bus_space_read_1(sc->sc_bst, sc->sc_bsh,
sc->sc_offset + RSR);
}
/* Packet too long? */
if (rsr & RSR_TOO_LONG) {
ifp->if_ierrors++;
DPRINTF(XID_INTR, ("xi: packet too long\n"));
}
/* CRC error? */
if (rsr & RSR_CRCERR) {
ifp->if_ierrors++;
DPRINTF(XID_INTR, ("xi: CRC error detected\n"));
}
/* Alignment error? */
if (rsr & RSR_ALIGNERR) {
ifp->if_ierrors++;
DPRINTF(XID_INTR, ("xi: alignment error detected\n"));
}
/* Check for rx overrun. */
if (rx_status & RX_OVERRUN) {
ifp->if_ierrors++;
bus_space_write_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + CR,
CLR_RX_OVERRUN);
DPRINTF(XID_INTR, ("xi: overrun cleared\n"));
}
/* Try to start more packets transmitting. */
if (IFQ_IS_EMPTY(&ifp->if_snd) == 0)
xi_start(ifp);
/* Detected excessive collisions? */
if ((tx_status & EXCESSIVE_COLL) && ifp->if_opackets > 0) {
DPRINTF(XID_INTR, ("xi: excessive collisions\n"));
bus_space_write_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + CR,
RESTART_TX);
ifp->if_oerrors++;
}
if ((tx_status & TX_ABORT) && ifp->if_opackets > 0)
ifp->if_oerrors++;
/* have handled the interrupt */
#if NRND > 0
rnd_add_uint32(&sc->sc_rnd_source, tx_status);
#endif
end:
/* Reenable interrupts. */
PAGE(sc, 0);
bus_space_write_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + CR,
ENABLE_INT);
return (1);
}
/*
* Pull a packet from the card into an mbuf chain.
*/
STATIC u_int16_t
xi_get(sc)
struct xi_softc *sc;
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct mbuf *top, **mp, *m;
u_int16_t pktlen, len, recvcount = 0;
u_int8_t *data;
DPRINTF(XID_CONFIG, ("xi_get()\n"));
PAGE(sc, 0);
pktlen =
bus_space_read_2(sc->sc_bst, sc->sc_bsh, sc->sc_offset + RBC0) &
RBC_COUNT_MASK;
DPRINTF(XID_CONFIG, ("xi_get: pktlen=%d\n", pktlen));
if (pktlen == 0) {
/*
* XXX At least one CE2 sets RBC0 == 0 occasionally, and only
* when MPE is set. It is not known why.
*/
return (0);
}
/* XXX should this be incremented now ? */
recvcount += pktlen;
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == 0)
return (recvcount);
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = pktlen;
m->m_flags |= M_HASFCS;
len = MHLEN;
top = 0;
mp = &top;
while (pktlen > 0) {
if (top) {
MGET(m, M_DONTWAIT, MT_DATA);
if (m == 0) {
m_freem(top);
return (recvcount);
}
len = MLEN;
}
if (pktlen >= MINCLSIZE) {
MCLGET(m, M_DONTWAIT);
if (!(m->m_flags & M_EXT)) {
m_freem(m);
m_freem(top);
return (recvcount);
}
len = MCLBYTES;
}
if (!top) {
caddr_t newdata = (caddr_t)ALIGN(m->m_data +
sizeof(struct ether_header)) -
sizeof(struct ether_header);
len -= newdata - m->m_data;
m->m_data = newdata;
}
len = min(pktlen, len);
data = mtod(m, u_int8_t *);
if (len > 1) {
len &= ~1;
bus_space_read_multi_2(sc->sc_bst, sc->sc_bsh,
sc->sc_offset + EDP, (u_int16_t *)data, len>>1);
} else
*data = bus_space_read_1(sc->sc_bst, sc->sc_bsh,
sc->sc_offset + EDP);
m->m_len = len;
pktlen -= len;
*mp = m;
mp = &m->m_next;
}
/* Skip Rx packet. */
bus_space_write_2(sc->sc_bst, sc->sc_bsh, sc->sc_offset + DO0,
DO_SKIP_RX_PKT);
ifp->if_ipackets++;
#if NBPFILTER > 0
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, top);
#endif
(*ifp->if_input)(ifp, top);
return (recvcount);
}
/*
* Serial management for the MII.
* The DELAY's below stem from the fact that the maximum frequency
* acceptable on the MDC pin is 2.5 MHz and fast processors can easily
* go much faster than that.
*/
/* Let the MII serial management be idle for one period. */
static INLINE void xi_mdi_idle __P((struct xi_softc *));
static INLINE void
xi_mdi_idle(sc)
struct xi_softc *sc;
{
bus_space_tag_t bst = sc->sc_bst;
bus_space_handle_t bsh = sc->sc_bsh;
bus_size_t offset = sc->sc_offset;
/* Drive MDC low... */
bus_space_write_1(bst, bsh, offset + GP2, MDC_LOW);
DELAY(1);
/* and high again. */
bus_space_write_1(bst, bsh, offset + GP2, MDC_HIGH);
DELAY(1);
}
/* Pulse out one bit of data. */
static INLINE void xi_mdi_pulse __P((struct xi_softc *, int));
static INLINE void
xi_mdi_pulse(sc, data)
struct xi_softc *sc;
int data;
{
bus_space_tag_t bst = sc->sc_bst;
bus_space_handle_t bsh = sc->sc_bsh;
bus_size_t offset = sc->sc_offset;
u_int8_t bit = data ? MDIO_HIGH : MDIO_LOW;
/* First latch the data bit MDIO with clock bit MDC low...*/
bus_space_write_1(bst, bsh, offset + GP2, bit | MDC_LOW);
DELAY(1);
/* then raise the clock again, preserving the data bit. */
bus_space_write_1(bst, bsh, offset + GP2, bit | MDC_HIGH);
DELAY(1);
}
/* Probe one bit of data. */
static INLINE int xi_mdi_probe __P((struct xi_softc *sc));
static INLINE int
xi_mdi_probe(sc)
struct xi_softc *sc;
{
bus_space_tag_t bst = sc->sc_bst;
bus_space_handle_t bsh = sc->sc_bsh;
bus_size_t offset = sc->sc_offset;
u_int8_t x;
/* Pull clock bit MDCK low... */
bus_space_write_1(bst, bsh, offset + GP2, MDC_LOW);
DELAY(1);
/* Read data and drive clock high again. */
x = bus_space_read_1(bst, bsh, offset + GP2);
bus_space_write_1(bst, bsh, offset + GP2, MDC_HIGH);
DELAY(1);
return (x & MDIO);
}
/* Pulse out a sequence of data bits. */
static INLINE void xi_mdi_pulse_bits __P((struct xi_softc *, u_int32_t, int));
static INLINE void
xi_mdi_pulse_bits(sc, data, len)
struct xi_softc *sc;
u_int32_t data;
int len;
{
u_int32_t mask;
for (mask = 1 << (len - 1); mask; mask >>= 1)
xi_mdi_pulse(sc, data & mask);
}
/* Read a PHY register. */
STATIC int
xi_mdi_read(self, phy, reg)
struct device *self;
int phy;
int reg;
{
struct xi_softc *sc = (struct xi_softc *)self;
int i;
u_int32_t mask;
u_int32_t data = 0;
PAGE(sc, 2);
for (i = 0; i < 32; i++) /* Synchronize. */
xi_mdi_pulse(sc, 1);
xi_mdi_pulse_bits(sc, 0x06, 4); /* Start + Read opcode */
xi_mdi_pulse_bits(sc, phy, 5); /* PHY address */
xi_mdi_pulse_bits(sc, reg, 5); /* PHY register */
xi_mdi_idle(sc); /* Turn around. */
xi_mdi_probe(sc); /* Drop initial zero bit. */
for (mask = 1 << 15; mask; mask >>= 1) {
if (xi_mdi_probe(sc))
data |= mask;
}
xi_mdi_idle(sc);
DPRINTF(XID_MII,
("xi_mdi_read: phy %d reg %d -> %x\n", phy, reg, data));
return (data);
}
/* Write a PHY register. */
STATIC void
xi_mdi_write(self, phy, reg, value)
struct device *self;
int phy;
int reg;
int value;
{
struct xi_softc *sc = (struct xi_softc *)self;
int i;
PAGE(sc, 2);
for (i = 0; i < 32; i++) /* Synchronize. */
xi_mdi_pulse(sc, 1);
xi_mdi_pulse_bits(sc, 0x05, 4); /* Start + Write opcode */
xi_mdi_pulse_bits(sc, phy, 5); /* PHY address */
xi_mdi_pulse_bits(sc, reg, 5); /* PHY register */
xi_mdi_pulse_bits(sc, 0x02, 2); /* Turn around. */
xi_mdi_pulse_bits(sc, value, 16); /* Write the data */
xi_mdi_idle(sc); /* Idle away. */
DPRINTF(XID_MII,
("xi_mdi_write: phy %d reg %d val %x\n", phy, reg, value));
}
STATIC void
xi_statchg(self)
struct device *self;
{
/* XXX Update ifp->if_baudrate */
}
/*
* Change media according to request.
*/
STATIC int
xi_mediachange(ifp)
struct ifnet *ifp;
{
int s;
DPRINTF(XID_CONFIG, ("xi_mediachange()\n"));
if (ifp->if_flags & IFF_UP) {
s = splnet();
xi_init(ifp->if_softc);
splx(s);
}
return (0);
}
/*
* Notify the world which media we're using.
*/
STATIC void
xi_mediastatus(ifp, ifmr)
struct ifnet *ifp;
struct ifmediareq *ifmr;
{
struct xi_softc *sc = ifp->if_softc;
DPRINTF(XID_CONFIG, ("xi_mediastatus()\n"));
if (LIST_FIRST(&sc->sc_mii.mii_phys)) {
mii_pollstat(&sc->sc_mii);
ifmr->ifm_status = sc->sc_mii.mii_media_status;
ifmr->ifm_active = sc->sc_mii.mii_media_active;
}
}
STATIC void
xi_reset(sc)
struct xi_softc *sc;
{
int s;
DPRINTF(XID_CONFIG, ("xi_reset()\n"));
s = splnet();
xi_stop(sc);
xi_init(sc);
splx(s);
}
STATIC void
xi_watchdog(ifp)
struct ifnet *ifp;
{
struct xi_softc *sc = ifp->if_softc;
printf("%s: device timeout\n", sc->sc_dev.dv_xname);
++ifp->if_oerrors;
xi_reset(sc);
}
STATIC void
xi_stop(sc)
register struct xi_softc *sc;
{
bus_space_tag_t bst = sc->sc_bst;
bus_space_handle_t bsh = sc->sc_bsh;
bus_size_t offset = sc->sc_offset;
DPRINTF(XID_CONFIG, ("xi_stop()\n"));
PAGE(sc, 0x40);
bus_space_write_1(bst, bsh, offset + CMD0, DISABLE_RX);
/* Disable interrupts. */
PAGE(sc, 0);
bus_space_write_1(bst, bsh, offset + CR, 0);
PAGE(sc, 1);
bus_space_write_1(bst, bsh, offset + IMR0, 0);
/* Cancel watchdog timer. */
sc->sc_ethercom.ec_if.if_timer = 0;
}
STATIC int
xi_enable(sc)
struct xi_softc *sc;
{
int error;
if (!sc->sc_enabled) {
error = (*sc->sc_enable)(sc);
if (error)
return (error);
sc->sc_enabled = 1;
xi_full_reset(sc);
}
return (0);
}
STATIC void
xi_disable(sc)
struct xi_softc *sc;
{
if (sc->sc_enabled) {
sc->sc_enabled = 0;
(*sc->sc_disable)(sc);
}
}
STATIC void
xi_init(sc)
struct xi_softc *sc;
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
bus_space_tag_t bst = sc->sc_bst;
bus_space_handle_t bsh = sc->sc_bsh;
bus_size_t offset = sc->sc_offset;
DPRINTF(XID_CONFIG, ("xi_init()\n"));
/* Setup the ethernet interrupt mask. */
PAGE(sc, 1);
bus_space_write_1(bst, bsh, offset + IMR0,
ISR_TX_OFLOW | ISR_PKT_TX | ISR_MAC_INT | /* ISR_RX_EARLY | */
ISR_RX_FULL | ISR_RX_PKT_REJ | ISR_FORCED_INT);
if (sc->sc_chipset < XI_CHIPSET_DINGO) {
/* XXX What is this? Not for Dingo at least. */
/* Unmask TX underrun detection */
bus_space_write_1(bst, bsh, offset + IMR1, 1);
}
/* Enable interrupts. */
PAGE(sc, 0);
bus_space_write_1(bst, bsh, offset + CR, ENABLE_INT);
xi_set_address(sc);
PAGE(sc, 0x40);
bus_space_write_1(bst, bsh, offset + CMD0, ENABLE_RX | ONLINE);
PAGE(sc, 0);
/* Set current media. */
mii_mediachg(&sc->sc_mii);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
xi_start(ifp);
}
/*
* Start outputting on the interface.
* Always called as splnet().
*/
STATIC void
xi_start(ifp)
struct ifnet *ifp;
{
struct xi_softc *sc = ifp->if_softc;
bus_space_tag_t bst = sc->sc_bst;
bus_space_handle_t bsh = sc->sc_bsh;
bus_size_t offset = sc->sc_offset;
unsigned int s, len, pad = 0;
struct mbuf *m0, *m;
u_int16_t space;
DPRINTF(XID_CONFIG, ("xi_start()\n"));
/* Don't transmit if interface is busy or not running. */
if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) {
DPRINTF(XID_CONFIG, ("xi: interface busy or not running\n"));
return;
}
/* Peek at the next packet. */
IFQ_POLL(&ifp->if_snd, m0);
if (m0 == 0)
return;
/* We need to use m->m_pkthdr.len, so require the header. */
if (!(m0->m_flags & M_PKTHDR))
panic("xi_start: no header mbuf");
len = m0->m_pkthdr.len;
#if 1
/* Pad to ETHER_MIN_LEN - ETHER_CRC_LEN. */
if (len < ETHER_MIN_LEN - ETHER_CRC_LEN)
pad = ETHER_MIN_LEN - ETHER_CRC_LEN - len;
#else
pad = 0;
#endif
PAGE(sc, 0);
bus_space_write_2(bst, bsh, offset + TRS, (u_int16_t)len + pad + 2);
space = bus_space_read_2(bst, bsh, offset + TSO) & 0x7fff;
if (len + pad + 2 > space) {
DPRINTF(XID_FIFO,
("xi: not enough space in output FIFO (%d > %d)\n",
len + pad + 2, space));
return;
}
IFQ_DEQUEUE(&ifp->if_snd, m0);
#if NBPFILTER > 0
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m0);
#endif
/*
* Do the output at splhigh() so that an interrupt from another device
* won't cause a FIFO underrun.
*/
s = splhigh();
bus_space_write_2(bst, bsh, offset + EDP, (u_int16_t)len + pad);
for (m = m0; m; ) {
if (m->m_len > 1)
bus_space_write_multi_2(bst, bsh, offset + EDP,
mtod(m, u_int16_t *), m->m_len>>1);
if (m->m_len & 1) {
DPRINTF(XID_CONFIG, ("xi: XXX odd!\n"));
bus_space_write_1(bst, bsh, offset + EDP,
*(mtod(m, u_int8_t *) + m->m_len - 1));
}
MFREE(m, m0);
m = m0;
}
DPRINTF(XID_CONFIG, ("xi: len=%d pad=%d total=%d\n", len, pad, len+pad+4));
if (sc->sc_chipset >= XI_CHIPSET_MOHAWK)
bus_space_write_1(bst, bsh, offset + CR, TX_PKT | ENABLE_INT);
else {
for (; pad > 1; pad -= 2)
bus_space_write_2(bst, bsh, offset + EDP, 0);
if (pad == 1)
bus_space_write_1(bst, bsh, offset + EDP, 0);
}
splx(s);
ifp->if_timer = 5;
++ifp->if_opackets;
}
STATIC int
xi_ether_ioctl(ifp, cmd, data)
struct ifnet *ifp;
u_long cmd;
caddr_t data;
{
struct ifaddr *ifa = (struct ifaddr *)data;
struct xi_softc *sc = ifp->if_softc;
int error;
DPRINTF(XID_CONFIG, ("xi_ether_ioctl()\n"));
switch (cmd) {
case SIOCSIFADDR:
if ((error = xi_enable(sc)) != 0)
break;
ifp->if_flags |= IFF_UP;
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
xi_init(sc);
arp_ifinit(ifp, ifa);
break;
#endif /* INET */
#ifdef NS
case AF_NS:
{
struct ns_addr *ina = &IA_SNS(ifa)->sns_addr;
if (ns_nullhost(*ina))
ina->x_host = *(union ns_host *)
LLADDR(ifp->if_sadl);
else
memcpy(LLADDR(ifp->if_sadl), ina->x_host.c_host,
ifp->if_addrlen);
/* Set new address. */
xi_init(sc);
break;
}
#endif /* NS */
default:
xi_init(sc);
break;
}
break;
default:
return (EINVAL);
}
return (0);
}
STATIC int
xi_ioctl(ifp, cmd, data)
struct ifnet *ifp;
u_long cmd;
caddr_t data;
{
struct xi_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *)data;
int s, error = 0;
DPRINTF(XID_CONFIG, ("xi_ioctl()\n"));
s = splnet();
switch (cmd) {
case SIOCSIFADDR:
error = xi_ether_ioctl(ifp, cmd, data);
break;
case SIOCSIFFLAGS:
if ((ifp->if_flags & IFF_UP) == 0 &&
(ifp->if_flags & IFF_RUNNING) != 0) {
/*
* If interface is marked down and it is running,
* stop it.
*/
xi_stop(sc);
ifp->if_flags &= ~IFF_RUNNING;
xi_disable(sc);
} else if ((ifp->if_flags & IFF_UP) != 0 &&
(ifp->if_flags & IFF_RUNNING) == 0) {
/*
* If interface is marked up and it is stopped,
* start it.
*/
if ((error = xi_enable(sc)) != 0)
break;
xi_init(sc);
} else if ((ifp->if_flags & IFF_UP) != 0) {
/*
* Reset the interface to pick up changes in any
* other flags that affect hardware registers.
*/
xi_set_address(sc);
}
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
if (sc->sc_enabled == 0) {
error = EIO;
break;
}
error = (cmd == SIOCADDMULTI) ?
ether_addmulti(ifr, &sc->sc_ethercom) :
ether_delmulti(ifr, &sc->sc_ethercom);
if (error == ENETRESET) {
/*
* Multicast list has changed; set the hardware
* filter accordingly.
*/
xi_set_address(sc);
error = 0;
}
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd);
break;
default:
error = EINVAL;
break;
}
splx(s);
return (error);
}
STATIC void
xi_set_address(sc)
struct xi_softc *sc;
{
bus_space_tag_t bst = sc->sc_bst;
bus_space_handle_t bsh = sc->sc_bsh;
bus_size_t offset = sc->sc_offset;
struct ethercom *ether = &sc->sc_ethercom;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct ether_multistep step;
struct ether_multi *enm;
int page, num;
int i;
u_int8_t x;
u_int8_t *enaddr;
u_int8_t indaddr[64];
DPRINTF(XID_CONFIG, ("xi_set_address()\n"));
enaddr = (u_int8_t *)LLADDR(ifp->if_sadl);
if (sc->sc_chipset >= XI_CHIPSET_MOHAWK)
for (i = 0; i < 6; i++)
indaddr[i] = enaddr[5 - i];
else
for (i = 0; i < 6; i++)
indaddr[i] = enaddr[i];
num = 1;
if (ether->ec_multicnt > 9) {
ifp->if_flags |= IFF_ALLMULTI;
goto done;
}
ETHER_FIRST_MULTI(step, ether, enm);
for (; enm; num++) {
if (memcmp(enm->enm_addrlo, enm->enm_addrhi,
sizeof(enm->enm_addrlo)) != 0) {
/*
* The multicast address is really a range;
* it's easier just to accept all multicasts.
* XXX should we be setting IFF_ALLMULTI here?
*/
ifp->if_flags |= IFF_ALLMULTI;
goto done;
}
if (sc->sc_chipset >= XI_CHIPSET_MOHAWK)
for (i = 0; i < 6; i++)
indaddr[num * 6 + i] = enm->enm_addrlo[5 - i];
else
for (i = 0; i < 6; i++)
indaddr[num * 6 + i] = enm->enm_addrlo[i];
ETHER_NEXT_MULTI(step, enm);
}
ifp->if_flags &= ~IFF_ALLMULTI;
done:
if (num < 10)
memset(&indaddr[num * 6], 0xff, 6 * (10 - num));
for (page = 0; page < 8; page++) {
#ifdef XIDEBUG
if (xidebug & XID_MCAST) {
printf("page %d before:", page);
for (i = 0; i < 8; i++)
printf(" %02x", indaddr[page * 8 + i]);
printf("\n");
}
#endif
PAGE(sc, 0x50 + page);
bus_space_write_region_1(bst, bsh, offset + IA,
&indaddr[page * 8], page == 7 ? 4 : 8);
/*
* XXX
* Without this delay, the address registers on my CE2 get
* trashed the first and I have to cycle it. I have no idea
* why. - mycroft, 2004/08/09
*/
DELAY(50);
#ifdef XIDEBUG
if (xidebug & XID_MCAST) {
bus_space_read_region_1(bst, bsh, offset + IA,
&indaddr[page * 8], page == 7 ? 4 : 8);
printf("page %d after: ", page);
for (i = 0; i < 8; i++)
printf(" %02x", indaddr[page * 8 + i]);
printf("\n");
}
#endif
}
PAGE(sc, 0x42);
x = SWC1_IND_ADDR;
if (ifp->if_flags & IFF_PROMISC)
x |= SWC1_PROMISC;
if (ifp->if_flags & (IFF_ALLMULTI|IFF_PROMISC))
x |= SWC1_MCAST_PROM;
if (!LIST_FIRST(&sc->sc_mii.mii_phys))
x |= SWC1_AUTO_MEDIA;
bus_space_write_1(sc->sc_bst, sc->sc_bsh, sc->sc_offset + SWC1, x);
}
STATIC void
xi_cycle_power(sc)
struct xi_softc *sc;
{
bus_space_tag_t bst = sc->sc_bst;
bus_space_handle_t bsh = sc->sc_bsh;
bus_size_t offset = sc->sc_offset;
DPRINTF(XID_CONFIG, ("xi_cycle_power()\n"));
PAGE(sc, 4);
DELAY(1);
bus_space_write_1(bst, bsh, offset + GP1, 0);
tsleep(&xi_cycle_power, PWAIT, "xipwr1", hz * 40 / 1000);
if (sc->sc_chipset >= XI_CHIPSET_MOHAWK)
bus_space_write_1(bst, bsh, offset + GP1, POWER_UP);
else
/* XXX What is bit 2 (aka AIC)? */
bus_space_write_1(bst, bsh, offset + GP1, POWER_UP | 4);
tsleep(&xi_cycle_power, PWAIT, "xipwr2", hz * 20 / 1000);
}
STATIC void
xi_full_reset(sc)
struct xi_softc *sc;
{
bus_space_tag_t bst = sc->sc_bst;
bus_space_handle_t bsh = sc->sc_bsh;
bus_size_t offset = sc->sc_offset;
u_int8_t x;
DPRINTF(XID_CONFIG, ("xi_full_reset()\n"));
/* Do an as extensive reset as possible on all functions. */
xi_cycle_power(sc);
bus_space_write_1(bst, bsh, offset + CR, SOFT_RESET);
tsleep(&xi_full_reset, PWAIT, "xirst1", hz * 20 / 1000);
bus_space_write_1(bst, bsh, offset + CR, 0);
tsleep(&xi_full_reset, PWAIT, "xirst2", hz * 20 / 1000);
PAGE(sc, 4);
if (sc->sc_chipset >= XI_CHIPSET_MOHAWK) {
/*
* Drive GP1 low to power up ML6692 and GP2 high to power up
* the 10MHz chip. XXX What chip is that? The phy?
*/
bus_space_write_1(bst, bsh, offset + GP0,
GP1_OUT | GP2_OUT | GP2_WR);
}
tsleep(&xi_full_reset, PWAIT, "xirst3", hz * 500 / 1000);
/* Get revision information. XXX Symbolic constants. */
sc->sc_rev = bus_space_read_1(bst, bsh, offset + BV) &
((sc->sc_chipset >= XI_CHIPSET_MOHAWK) ? 0x70 : 0x30) >> 4;
DPRINTF(XID_CONFIG, ("xi: rev=%02x\n", sc->sc_rev));
/* Media selection. XXX Maybe manual overriding too? */
if (sc->sc_chipset < XI_CHIPSET_MOHAWK) {
/*
* XXX I have no idea what this really does, it is from the
* Linux driver.
*/
bus_space_write_1(bst, bsh, offset + GP0, GP1_OUT);
}
tsleep(&xi_full_reset, PWAIT, "xirst4", hz * 40 / 1000);
/*
* Disable source insertion.
* XXX Dingo does not have this bit, but Linux does it unconditionally.
*/
if (sc->sc_chipset < XI_CHIPSET_DINGO) {
PAGE(sc, 0x42);
bus_space_write_1(bst, bsh, offset + SWC0, 0x20);
}
/* Set the local memory dividing line. */
if (sc->sc_rev != 1) {
PAGE(sc, 2);
/* XXX Symbolic constant preferrable. */
bus_space_write_2(bst, bsh, offset + RBS0, 0x2000);
}
/*
* Apparently the receive byte pointer can be bad after a reset, so
* we hardwire it correctly.
*/
PAGE(sc, 0);
bus_space_write_2(bst, bsh, offset + DO0, DO_CHG_OFFSET);
/* Setup ethernet MAC registers. XXX Symbolic constants. */
PAGE(sc, 0x40);
bus_space_write_1(bst, bsh, offset + RX0MSK,
PKT_TOO_LONG | CRC_ERR | RX_OVERRUN | RX_ABORT | RX_OK);
bus_space_write_1(bst, bsh, offset + TX0MSK,
CARRIER_LOST | EXCESSIVE_COLL | TX_UNDERRUN | LATE_COLLISION |
SQE | TX_ABORT | TX_OK);
if (sc->sc_chipset < XI_CHIPSET_DINGO)
/* XXX From Linux, dunno what 0xb0 means. */
bus_space_write_1(bst, bsh, offset + TX1MSK, 0xb0);
bus_space_write_1(bst, bsh, offset + RXST0, 0);
bus_space_write_1(bst, bsh, offset + TXST0, 0);
bus_space_write_1(bst, bsh, offset + TXST1, 0);
PAGE(sc, 2);
/* Enable MII function if available. */
x = 0;
if (LIST_FIRST(&sc->sc_mii.mii_phys))
x |= SELECT_MII;
bus_space_write_1(bst, bsh, offset + MSR, x);
tsleep(&xi_full_reset, PWAIT, "xirst5", hz * 20 / 1000);
/* Configure the LED registers. */
/* XXX This is not good for 10base2. */
bus_space_write_1(bst, bsh, offset + LED,
(LED_TX_ACT << LED1_SHIFT) | (LED_10MB_LINK << LED0_SHIFT));
if (sc->sc_chipset >= XI_CHIPSET_DINGO)
bus_space_write_1(bst, bsh, offset + LED3,
LED_100MB_LINK << LED3_SHIFT);
/*
* The Linux driver says this:
* We should switch back to page 0 to avoid a bug in revision 0
* where regs with offset below 8 can't be read after an access
* to the MAC registers.
*/
PAGE(sc, 0);
}
Reference in New Issue View Git Blame Copy Permalink