189 lines
7.5 KiB
C
189 lines
7.5 KiB
C
/* $NetBSD: atavar.h,v 1.19 2001/04/25 17:53:27 bouyer Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1998 Manuel Bouyer.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/* Hight-level functions and structures used by both ATA and ATAPI devices */
|
|
|
|
/* Datas common to drives and controller drivers */
|
|
struct ata_drive_datas {
|
|
u_int8_t drive; /* drive number */
|
|
int8_t ata_vers; /* ATA version supported */
|
|
u_int16_t drive_flags; /* bitmask for drives present/absent and cap */
|
|
#define DRIVE_ATA 0x0001
|
|
#define DRIVE_ATAPI 0x0002
|
|
#define DRIVE_OLD 0x0004
|
|
#define DRIVE (DRIVE_ATA|DRIVE_ATAPI|DRIVE_OLD)
|
|
#define DRIVE_CAP32 0x0008
|
|
#define DRIVE_DMA 0x0010
|
|
#define DRIVE_UDMA 0x0020
|
|
#define DRIVE_MODE 0x0040 /* the drive reported its mode */
|
|
#define DRIVE_RESET 0x0080 /* reset the drive state at next xfer */
|
|
#define DRIVE_DMAERR 0x0100 /* Udma transfer had crc error, don't try DMA */
|
|
/*
|
|
* Current setting of drive's PIO, DMA and UDMA modes.
|
|
* Is initialised by the disks drivers at attach time, and may be
|
|
* changed later by the controller's code if needed
|
|
*/
|
|
u_int8_t PIO_mode; /* Current setting of drive's PIO mode */
|
|
u_int8_t DMA_mode; /* Current setting of drive's DMA mode */
|
|
u_int8_t UDMA_mode; /* Current setting of drive's UDMA mode */
|
|
/* Supported modes for this drive */
|
|
u_int8_t PIO_cap; /* supported drive's PIO mode */
|
|
u_int8_t DMA_cap; /* supported drive's DMA mode */
|
|
u_int8_t UDMA_cap; /* supported drive's UDMA mode */
|
|
/*
|
|
* Drive state.
|
|
* This is reset to 0 after a channel reset.
|
|
*/
|
|
u_int8_t state;
|
|
#define RESET 0
|
|
#define RECAL 1
|
|
#define RECAL_WAIT 2
|
|
#define PIOMODE 3
|
|
#define PIOMODE_WAIT 4
|
|
#define DMAMODE 5
|
|
#define DMAMODE_WAIT 6
|
|
#define GEOMETRY 7
|
|
#define GEOMETRY_WAIT 8
|
|
#define MULTIMODE 9
|
|
#define MULTIMODE_WAIT 10
|
|
#define READY 11
|
|
|
|
/* numbers of xfers and DMA errs. Used by ata_dmaerr() */
|
|
u_int8_t n_dmaerrs;
|
|
u_int32_t n_xfers;
|
|
/* Downgrade after NERRS_MAX errors in at most NXFER xfers */
|
|
#define NERRS_MAX 4
|
|
#define NXFER 4000
|
|
|
|
struct device *drv_softc; /* ATA drives softc, if any */
|
|
void* chnl_softc; /* channel softc */
|
|
};
|
|
|
|
/* ATA/ATAPI common attachement datas */
|
|
/*
|
|
* XXX Small hack alert
|
|
* NOTE: The first field of struct ata_atapi_attach is shared with
|
|
* dev/scspi/scsipiconf.h's struct scsipi_channel. This allows
|
|
* atapibus and scsibus to attach to the same device.
|
|
*/
|
|
struct ata_atapi_attach {
|
|
u_int8_t aa_type; /* Type of device */
|
|
/*#define T_SCSI 0*/
|
|
#define T_ATAPI 1
|
|
#define T_ATA 2
|
|
u_int8_t aa_channel; /* controller's channel */
|
|
u_int8_t aa_openings; /* Number of simultaneous commands possible */
|
|
struct ata_drive_datas *aa_drv_data;
|
|
void *aa_bus_private; /* infos specifics to this bus */
|
|
};
|
|
|
|
/* User config flags that force (or disable) the use of a mode */
|
|
#define ATA_CONFIG_PIO_MODES 0x0007
|
|
#define ATA_CONFIG_PIO_SET 0x0008
|
|
#define ATA_CONFIG_PIO_OFF 0
|
|
#define ATA_CONFIG_DMA_MODES 0x0070
|
|
#define ATA_CONFIG_DMA_SET 0x0080
|
|
#define ATA_CONFIG_DMA_DISABLE 0x0070
|
|
#define ATA_CONFIG_DMA_OFF 4
|
|
#define ATA_CONFIG_UDMA_MODES 0x0700
|
|
#define ATA_CONFIG_UDMA_SET 0x0800
|
|
#define ATA_CONFIG_UDMA_DISABLE 0x0700
|
|
#define ATA_CONFIG_UDMA_OFF 8
|
|
|
|
/*
|
|
* ATA/ATAPI commands description
|
|
*
|
|
* This structure defines the interface between the ATA/ATAPI device driver
|
|
* and the controller for short commands. It contains the command's parameter,
|
|
* the len of data's to read/write (if any), and a function to call upon
|
|
* completion.
|
|
* If no sleep is allowed, the driver can poll for command completion.
|
|
* Once the command completed, if the error registed is valid, the flag
|
|
* AT_ERROR is set and the error register value is copied to r_error .
|
|
* A separate interface is needed for read/write or ATAPI packet commands
|
|
* (which need multiple interrupts per commands).
|
|
*/
|
|
struct wdc_command {
|
|
u_int8_t r_command; /* Parameters to upload to registers */
|
|
u_int8_t r_head;
|
|
u_int16_t r_cyl;
|
|
u_int8_t r_sector;
|
|
u_int8_t r_count;
|
|
u_int8_t r_precomp;
|
|
u_int8_t r_st_bmask; /* status register mask to wait for before command */
|
|
u_int8_t r_st_pmask; /* status register mask to wait for after command */
|
|
u_int8_t r_error; /* error register after command done */
|
|
volatile u_int16_t flags;
|
|
#define AT_READ 0x0001 /* There is data to read */
|
|
#define AT_WRITE 0x0002 /* There is data to write (excl. with AT_READ) */
|
|
#define AT_WAIT 0x0008 /* wait in controller code for command completion */
|
|
#define AT_POLL 0x0010 /* poll for command completion (no interrupts) */
|
|
#define AT_DONE 0x0020 /* command is done */
|
|
#define AT_ERROR 0x0040 /* command is done with error */
|
|
#define AT_TIMEOU 0x0080 /* command timed out */
|
|
#define AT_DF 0x0100 /* Drive fault */
|
|
#define AT_READREG 0x0200 /* Read registers on completion */
|
|
int timeout; /* timeout (in ms) */
|
|
void *data; /* Data buffer address */
|
|
int bcount; /* number of bytes to transfer */
|
|
void (*callback) __P((void*)); /* command to call once command completed */
|
|
void *callback_arg; /* argument passed to *callback() */
|
|
};
|
|
|
|
int wdc_exec_command __P((struct ata_drive_datas *, struct wdc_command*));
|
|
#define WDC_COMPLETE 0x01
|
|
#define WDC_QUEUED 0x02
|
|
#define WDC_TRY_AGAIN 0x03
|
|
|
|
void wdc_probe_caps __P((struct ata_drive_datas*));
|
|
int wdc_downgrade_mode __P((struct ata_drive_datas*));
|
|
|
|
void wdc_reset_channel __P((struct ata_drive_datas *));
|
|
|
|
int wdc_ata_addref __P((struct ata_drive_datas *));
|
|
void wdc_ata_delref __P((struct ata_drive_datas *));
|
|
void wdc_ata_kill_pending __P((struct ata_drive_datas *));
|
|
|
|
struct ataparams;
|
|
int ata_get_params __P((struct ata_drive_datas*, u_int8_t,
|
|
struct ataparams *));
|
|
int ata_set_mode __P((struct ata_drive_datas*, u_int8_t, u_int8_t));
|
|
/* return code for these cmds */
|
|
#define CMD_OK 0
|
|
#define CMD_ERR 1
|
|
#define CMD_AGAIN 2
|
|
|
|
void ata_dmaerr __P((struct ata_drive_datas *));
|
|
void ata_perror __P((struct ata_drive_datas *, int, char *));
|