NetBSD/sys/dev/ic/rrunnervar.h
2005-02-04 02:10:35 +00:00

273 lines
8.7 KiB
C

/* $NetBSD: rrunnervar.h,v 1.8 2005/02/04 02:10:37 perry Exp $ */
/* Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code contributed to The NetBSD Foundation by Kevin M. Lahey
* of the Numerical Aerospace Simulation Facility, NASA Ames Research
* Center.
*
* Partially based on a HIPPI driver written by Essential Communications
* Corporation. Thanks to Jason Thorpe, Matt Jacob, and Fred Templin
* for invaluable advice and encouragement!
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/* RoadRunner software status per interface */
struct rr_tuning {
/* Performance tuning registers: */
u_int32_t rt_mode_and_status;
u_int32_t rt_conn_retry_count;
u_int32_t rt_conn_retry_timer;
u_int32_t rt_conn_timeout;
u_int32_t rt_stats_timer;
u_int32_t rt_interrupt_timer;
u_int32_t rt_tx_timeout;
u_int32_t rt_rx_timeout;
/* DMA performance tuning registers: */
u_int32_t rt_pci_state;
u_int32_t rt_dma_write_state;
u_int32_t rt_dma_read_state;
u_int32_t rt_driver_param;
};
struct rr_eeprom {
u_int32_t ifr_offset; /* initial offset in bytes */
u_int32_t ifr_length; /* length in bytes to write */
u_int32_t *ifr_buffer; /* data to be written */
};
#define EIOCGTUNE 1 /* retrieve tuning */
#define EIOCSTUNE 2 /* set tuning */
#define EIOCGEEPROM 3 /* get eeprom */
#define EIOCSEEPROM 4 /* set eeprom */
#define EIOCGSTATS 5 /* get statistics */
#define EIOCRESET 6 /* reset the card */
#ifdef _KERNEL
/* Per-ring information for the SNAP (network) receive ring */
struct esh_snap_ring_ctl {
bus_dmamap_t ec_dma[RR_MAX_DESCR];
struct mbuf *ec_m[RR_MAX_DESCR];
struct mbuf *ec_cur_pkt; /* current packet being processed */
struct mbuf *ec_cur_mbuf; /* current mbuf being processed */
int ec_error; /* encountered error? */
u_int16_t ec_producer; /* latest buffer driver produced */
u_int16_t ec_consumer; /* latest buffer runcode consumed */
struct rr_descr *ec_descr; /* array of descriptors for ring */
};
TAILQ_HEAD(esh_dmainfo_list, esh_dmainfo);
struct esh_dmainfo {
u_int32_t ed_flags;
#define ESH_DI_BUSY 0x1
#define ESH_DI_READING 0x2
bus_dmamap_t ed_dma;
struct buf *ed_buf;
int ed_read_len;
int ed_error;
TAILQ_ENTRY(esh_dmainfo) ed_list;
};
struct esh_send_ring_ctl {
bus_dmamap_t ec_dma; /* dmamap for data to transmit */
int ec_offset; /* offset in dmamap to send next */
size_t ec_len; /* total length of current buf */
struct mbuf *ec_cur_mbuf; /* current mbuf being processed */
struct buf *ec_cur_buf; /* current buf being processed */
struct esh_dmainfo *ec_cur_dmainfo;
/* current dmainfo being processed */
struct bufq_state ec_buf_queue; /* queue of bufs to send */
int ec_error; /* encountered error? */
u_int16_t ec_producer; /* latest buffer driver produced */
u_int16_t ec_consumer; /* latest buffer runcode consumed */
struct rr_descr *ec_descr; /* array of descriptors for ring */
struct esh_dmainfo_list ec_di_queue;
};
struct esh_fp_ring_ctl {
struct esh_dmainfo *ec_dmainfo[RR_MAX_DESCR];
struct esh_dmainfo *ec_cur_dmainfo;
int ec_offset; /* offset of current buf */
int ec_error; /* encountered error? */
int ec_seen_end; /* seen the end of the buffer? */
int ec_dmainfo_count; /* dmainfo buffers in use count */
u_int16_t ec_producer; /* latest buffer driver produced */
u_int16_t ec_consumer; /* latest buffer runcode consumed */
u_int32_t ec_read_len; /* length of packet being read in */
struct rr_descr *ec_descr; /* array of descriptors for ring */
struct esh_dmainfo_list ec_queue;
u_int ec_ulp; /* ULP for this ring */
int ec_index; /* index into list of active rings */
bus_dmamap_t ec_dma;
bus_dma_segment_t ec_dmaseg;
};
struct esh_softc {
struct device sc_dev;
struct ifnet sc_if;
struct ifmedia sc_media;
volatile int sc_flags;
#define ESH_FL_INITIALIZING 0x001
#define ESH_FL_INITIALIZED 0x002
#define ESH_FL_RUNCODE_UP 0x004
#define ESH_FL_LINK_UP 0x008
#define ESH_FL_SNAP_RING_UP 0x010
#define ESH_FL_FP_RING_UP 0x020
#define ESH_FL_EEPROM_BUSY 0x040
#define ESH_FL_FP_OPEN 0x080
#define ESH_FL_CRASHED 0x100
#define ESH_FL_CLOSING_SNAP 0x200
void *sc_ih;
bus_space_tag_t sc_iot; /* bus cookie */
bus_space_handle_t sc_ioh; /* bus i/o handle */
bus_dma_tag_t sc_dmat; /* dma tag */
bus_dma_segment_t sc_dmaseg; /* segment holding the various
data structures in host memory
that are DMA'ed to the NIC */
bus_dmamap_t sc_dma; /* dma map for the segment */
caddr_t sc_dma_addr; /* address in kernel of DMA mem */
bus_size_t sc_dma_size; /* size of dma-able region */
u_int8_t (*sc_bist_read)(struct esh_softc *);
void (*sc_bist_write)(struct esh_softc *, u_int8_t);
/*
* Definitions for the various driver structures that sit in host
* memory and are read by the NIC via DMA:
*/
struct rr_gen_info *sc_gen_info; /* gen info block pointer */
bus_addr_t sc_gen_info_dma;
struct rr_ring_ctl *sc_recv_ring_table;
bus_addr_t sc_recv_ring_table_dma;
struct rr_event *sc_event_ring;
bus_addr_t sc_event_ring_dma;
struct rr_descr *sc_send_ring;
struct rr2_descr *sc2_send_ring;
bus_addr_t sc_send_ring_dma;
struct rr_descr *sc_snap_recv_ring;
struct rr2_descr *sc2_snap_recv_ring;
bus_addr_t sc_snap_recv_ring_dma;
/*
* Control structures for the various rings that we definitely
* know we want to keep track of.
*/
struct esh_send_ring_ctl
sc_send;
struct esh_snap_ring_ctl
sc_snap_recv;
struct esh_fp_ring_ctl *sc_fp_recv[RR_ULP_COUNT];
struct esh_fp_ring_ctl *sc_fp_recv_index[RR_MAX_RECV_RING];
int sc_event_consumer;
int sc_event_producer;
int sc_cmd_consumer;
int sc_cmd_producer;
/*
* Various maintainance values we need
*/
int sc_watchdog;
/*
* Various hardware parameters we need to keep track of.
*/
u_int32_t sc_sram_size;
u_int32_t sc_runcode_start;
u_int32_t sc_runcode_version;
u_int32_t sc_version; /* interface of runcode (1 or 2) */
u_int16_t sc_options; /* options in current RunCode */
u_int sc_max_rings;
u_int32_t sc_pci_latency;
u_int32_t sc_pci_lat_gnt;
u_int32_t sc_pci_cache_line;
/* ULA assigned to hardware */
u_int8_t sc_ula[6];
/* Tuning parameters */
struct rr_tuning sc_tune;
/* Measure of how ugly this is. */
u_int32_t sc_misaligned_bufs;
u_int32_t sc_bad_lens;
struct esh_dmainfo_list sc_dmainfo_freelist;
u_int sc_dmainfo_freelist_count;
u_int sc_fp_rings;
};
void eshconfig(struct esh_softc *);
int eshintr(void *);
#endif /* _KERNEL */
/* Define a few constants for future use */
#define ESH_MAX_NSEGS 512 /* room for 2MB of data */
#define ESH_STATS_TIMER_DEFAULT 1030900
/* 1000000 usecs / 0.97 usecs/tick */
#define NEXT_EVENT(i) (((i) + 1) & (RR_EVENT_RING_SIZE - 1))
#define NEXT_SEND(i) (((i) + 1) & (RR_SEND_RING_SIZE - 1))
#define NEXT_RECV(i) (((i) + 1) & (RR_SNAP_RECV_RING_SIZE - 1))
#define PREV_SEND(i) (((i) + RR_SEND_RING_SIZE - 1) & (RR_SEND_RING_SIZE - 1))
#define PREV_RECV(i) \
(((i) + RR_SNAP_RECV_RING_SIZE - 1) & (RR_SNAP_RECV_RING_SIZE - 1))