340 lines
11 KiB
Plaintext
340 lines
11 KiB
Plaintext
.\" $NetBSD: results.ms,v 1.2 1998/01/09 06:41:02 perry Exp $
|
|
.\"
|
|
.\" Copyright (c) 1983 The Regents of the University of California.
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\" 3. All advertising materials mentioning features or use of this software
|
|
.\" must display the following acknowledgement:
|
|
.\" This product includes software developed by the University of
|
|
.\" California, Berkeley and its contributors.
|
|
.\" 4. Neither the name of the University nor the names of its contributors
|
|
.\" may be used to endorse or promote products derived from this software
|
|
.\" without specific prior written permission.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
.\" SUCH DAMAGE.
|
|
.\"
|
|
.\" @(#)results.ms 6.2 (Berkeley) 4/16/91
|
|
.\"
|
|
.ds RH Results
|
|
.NH
|
|
Results
|
|
.PP
|
|
The following tables indicate the results of our
|
|
test runs.
|
|
Note that each table contains results for tests run
|
|
on two varieties of 4.2BSD file systems.
|
|
The first set of results is always for a file system
|
|
with a basic blocking factor of eight Kilobytes and a
|
|
fragment size of 1 Kilobyte. The second sets of measurements
|
|
are for file systems with a four Kilobyte block size and a
|
|
one Kilobyte fragment size.
|
|
The values in parenthesis indicate the percentage of CPU
|
|
time used by the test program.
|
|
In the case of the two disk arm tests,
|
|
the value in parenthesis indicates the sum of the percentage
|
|
of the test programs that were run.
|
|
Entries of ``n. m.'' indicate this value was not measured.
|
|
.DS
|
|
.TS
|
|
box,center;
|
|
c s s s s
|
|
c s s s s
|
|
c s s s s
|
|
l | l s | l s
|
|
l | l s | l s
|
|
l | l l | l l
|
|
l | c c | c c.
|
|
4.2BSD File Systems Tests - \fBVAX 11/750\fR
|
|
=
|
|
Logically Sequential Transfers
|
|
from an \fB8K/1K\fR 4.2BSD File System (Kbytes/sec.)
|
|
_
|
|
Test Emulex SC750/Eagle UDA50/RA81
|
|
|
|
1 Drive 2 Drives 1 Drive 2 Drives
|
|
_
|
|
read_8192 490 (69%) 620 (96%) 310 (44%) 520 (65%)
|
|
write_4096 380 (99%) 370 (99%) 370 (97%) 360 (98%)
|
|
write_8192 470 (99%) 470 (99%) 320 (71%) 410 (83%)
|
|
rewrite_8192 650 (99%) 620 (99%) 310 (50%) 450 (70%)
|
|
=
|
|
.T&
|
|
c s s s s
|
|
c s s s s
|
|
l | l s | l s
|
|
l | l s | l s
|
|
l | l l | l l
|
|
l | c c | c c.
|
|
Logically Sequential Transfers
|
|
from \fB4K/1K\fR 4.2BSD File System (Kbytes/sec.)
|
|
_
|
|
Test Emulex SC750/Eagle UDA50/RA81
|
|
|
|
1 Drive 2 Drives 1 Drive 2 Drives
|
|
_
|
|
read_8192 300 (60%) 400 (84%) 210 (42%) 340 (77%)
|
|
write_4096 320 (98%) 320 (98%) 220 (67%) 290 (99%)
|
|
write_8192 340 (98%) 340 (99%) 220 (65%) 310 (98%)
|
|
rewrite_8192 450 (99%) 450 (98%) 230 (47%) 340 (78%)
|
|
.TE
|
|
.DE
|
|
.PP
|
|
Note that the rate of write operations on the VAX 11/750 are ultimately
|
|
CPU limited in some cases.
|
|
The write rates saturate the CPU at a lower bandwidth than the reads
|
|
because they must do disk allocation in addition to moving the data
|
|
from the user program to the disk.
|
|
The UDA50/RA81 saturates the CPU at a lower transfer rate for a given
|
|
operation than the SC750/Eagle because
|
|
it causes more memory contention with the CPU.
|
|
We do not know if this contention is caused by
|
|
the UNIBUS controller or the UDA50.
|
|
.PP
|
|
The following table reports the results of test runs on a VAX 11/780
|
|
with 4 Megabytes of main memory.
|
|
.DS
|
|
.TS
|
|
box,center;
|
|
c s s s s s s
|
|
c s s s s s s
|
|
c s s s s s s
|
|
l | l s | l s | l s
|
|
l | l s | l s | l s
|
|
l | l l | l l | l l
|
|
l | c c | c c | c c.
|
|
4.2BSD File Systems Tests - \fBVAX 11/780\fR
|
|
=
|
|
Logically Sequential Transfers
|
|
from an \fB8K/1K\fR 4.2BSD File System (Kbytes/sec.)
|
|
_
|
|
Test Emulex SC780/Eagle UDA50/RA81 Sys. Ind. 9900/Eagle
|
|
|
|
1 Drive 2 Drives 1 Drive 2 Drives 1 Drive 2 Drives
|
|
_
|
|
read_8192 560 (70%) 480 (58%) 360 (45%) 540 (72%) 340 (41%) 520 (66%)
|
|
write_4096 440 (98%) 440 (98%) 380 (99%) 480 (96%) 490 (96%) 440 (84%)
|
|
write_8192 490 (98%) 490 (98%) 220 (58%)* 480 (92%) 490 (80%) 430 (72%)
|
|
rewrite_8192 760 (100%) 560 (72%) 220 (50%)* 180 (52%)* 490 (60%) 520 (62%)
|
|
=
|
|
.T&
|
|
c s s s s s s
|
|
c s s s s s s
|
|
l | l s | l s | l s
|
|
l | l s | l s | l s
|
|
l | l l | l l | l l
|
|
l | c c | c c | c c.
|
|
Logically Sequential Transfers
|
|
from an \fB4K/1K\fR 4.2BSD File System (Kbytes/sec.)
|
|
_
|
|
Test Emulex SC780/Eagle UDA50/RA81 Sys. Ind. 9900/Eagle
|
|
|
|
1 Drive 2 Drives 1 Drive 2 Drives 1 Drive 2 Drives
|
|
_
|
|
read_8192 490 (77%) 370 (66%) n.m. n.m. 200 (31%) 370 (56%)
|
|
write_4096 380 (98%) 370 (98%) n.m. n.m. 200 (46%) 370 (88%)
|
|
write_8192 380 (99%) 370 (97%) n.m. n.m. 200 (45%) 320 (76%)
|
|
rewrite_8192 490 (87%) 350 (66%) n.m. n.m. 200 (31%) 300 (46%)
|
|
.TE
|
|
* the operation of the hardware was suspect during these tests.
|
|
.DE
|
|
.PP
|
|
The dropoff in reading and writing rates for the two drive SC780/Eagle
|
|
tests are probably due to the file system using insufficient
|
|
rotational delay for these tests.
|
|
We have not fully investigated these times.
|
|
.PP
|
|
The following table compares data rates on VAX 11/750s directly
|
|
with those of VAX 11/780s using the UDA50/RA81 storage system.
|
|
.DS
|
|
.TS
|
|
box,center;
|
|
c s s s s
|
|
c s s s s
|
|
c s s s s
|
|
l | l s | l s
|
|
l | l s | l s
|
|
l | l l | l l
|
|
l | c c | c c.
|
|
4.2BSD File Systems Tests - \fBDEC UDA50 - 750 vs. 780\fR
|
|
=
|
|
Logically Sequential Transfers
|
|
from an \fB8K/1K\fR 4.2BSD File System (Kbytes/sec.)
|
|
_
|
|
Test VAX 11/750 UNIBUS VAX 11/780 UNIBUS
|
|
|
|
1 Drive 2 Drives 1 Drive 2 Drives
|
|
_
|
|
read_8192 310 (44%) 520 (84%) 360 (45%) 540 (72%)
|
|
write_4096 370 (97%) 360 (100%) 380 (99%) 480 (96%)
|
|
write_8192 320 (71%) 410 (96%) 220 (58%)* 480 (92%)
|
|
rewrite_8192 310 (50%) 450 (80%) 220 (50%)* 180 (52%)*
|
|
=
|
|
.T&
|
|
c s s s s
|
|
c s s s s
|
|
l | l s | l s
|
|
l | l s | l s
|
|
l | l l | l l
|
|
l | c c | c c.
|
|
Logically Sequential Transfers
|
|
from an \fB4K/1K\fR 4.2BSD File System (Kbytes/sec.)
|
|
_
|
|
Test VAX 11/750 UNIBUS VAX 11/780 UNIBUS
|
|
|
|
1 Drive 2 Drives 1 Drive 2 Drives
|
|
_
|
|
read_8192 210 (42%) 342 (77%) n.m. n.m.
|
|
write_4096 215 (67%) 294 (99%) n.m. n.m.
|
|
write_8192 215 (65%) 305 (98%) n.m. n.m.
|
|
rewrite_8192 227 (47%) 336 (78%) n.m. n.m.
|
|
.TE
|
|
* the operation of the hardware was suspect during these tests.
|
|
.DE
|
|
.PP
|
|
The higher throughput available on VAX 11/780s is due to a number
|
|
of factors.
|
|
The larger main memory size allows a larger file system cache.
|
|
The block allocation routines run faster, raising the upper limit
|
|
on the data rates in writing new files.
|
|
.PP
|
|
The next table makes the same comparison using an Emulex controller
|
|
on both systems.
|
|
.DS
|
|
.TS
|
|
box, center;
|
|
c s s s s
|
|
c s s s s
|
|
c s s s s
|
|
l | l s | l s
|
|
l | l s | l s
|
|
l | l l | l l
|
|
l | c c | c c.
|
|
4.2BSD File Systems Tests - \fBEmulex - 750 vs. 780\fR
|
|
=
|
|
Logically Sequential Transfers
|
|
from an \fB8K/1K\fR 4.2BSD File System (Kbytes/sec.)
|
|
_
|
|
Test VAX 11/750 CMI Bus VAX 11/780 SBI Bus
|
|
|
|
1 Drive 2 Drives 1 Drive 2 Drives
|
|
_
|
|
read_8192 490 (69%) 620 (96%) 560 (70%) 480 (58%)
|
|
write_4096 380 (99%) 370 (99%) 440 (98%) 440 (98%)
|
|
write_8192 470 (99%) 470 (99%) 490 (98%) 490 (98%)
|
|
rewrite_8192 650 (99%) 620 (99%) 760 (100%) 560 (72%)
|
|
=
|
|
.T&
|
|
c s s s s
|
|
c s s s s
|
|
l | l s | l s
|
|
l | l s | l s
|
|
l | l l | l l
|
|
l | c c | c c.
|
|
Logically Sequential Transfers
|
|
from an \fB4K/1K\fR 4.2BSD File System (Kbytes/sec.)
|
|
_
|
|
Test VAX 11/750 CMI Bus VAX 11/780 SBI Bus
|
|
|
|
1 Drive 2 Drives 1 Drive 2 Drives
|
|
_
|
|
read_8192 300 (60%) 400 (84%) 490 (77%) 370 (66%)
|
|
write_4096 320 (98%) 320 (98%) 380 (98%) 370 (98%)
|
|
write_8192 340 (98%) 340 (99%) 380 (99%) 370 (97%)
|
|
rewrite_8192 450 (99%) 450 (98%) 490 (87%) 350 (66%)
|
|
.TE
|
|
.DE
|
|
.PP
|
|
The following table illustrates the evolution of our testing
|
|
process as both hardware and software problems effecting
|
|
the performance of the Emulex SC780 were corrected.
|
|
The software change was suggested to us by George Goble
|
|
of Purdue University.
|
|
.PP
|
|
The 4.2BSD handler for RH750/RH780 interfaced disk drives
|
|
contains several constants which to determine how
|
|
much time is provided between an interrupt signaling the completion
|
|
of a positioning command and the subsequent start of a data transfer
|
|
operation. These lead times are expressed as sectors of rotational delay.
|
|
If they are too small, an extra complete rotation will often be required
|
|
between a seek and subsequent read or write operation.
|
|
The higher bit rate and rotational speed of the 2351A Fujitsu
|
|
disk drives required
|
|
increasing these constants.
|
|
.PP
|
|
The hardware change involved allowing for slightly longer
|
|
delays in arbitrating for cycles on the SBI bus by
|
|
starting the bus arbitration cycle a little further ahead of
|
|
when the data was ready for transfer.
|
|
Finally we had to increase the rotational delay between consecutive
|
|
blocks in the file because
|
|
the higher bandwidth from the disk generated more memory contention,
|
|
which slowed down the processor.
|
|
.DS
|
|
.TS
|
|
box,center,expand;
|
|
c s s s s s s
|
|
c s s s s s s
|
|
c s s s s s s
|
|
l | l s | l s | l s
|
|
l | l s | l s | l s
|
|
l | l s | l s | l s
|
|
l | c c | c c | c c
|
|
l | c c | c c | c c.
|
|
4.2BSD File Systems Tests - \fBEmulex SC780 Disk Controller Evolution\fR
|
|
=
|
|
Logically Sequential Transfers
|
|
from an \fB8K/1K\fR 4.2BSD File System (Kbytes/sec.)
|
|
_
|
|
Test Inadequate Search Lead OK Search Lead OK Search Lead
|
|
Initial SBI Arbitration Init SBI Arb. Improved SBI Arb.
|
|
|
|
1 Drive 2 Drives 1 Drive 2 Drives 1 Drive 2 Drives
|
|
_
|
|
read_8192 320 370 440 (60%) n.m. 560 (70%) 480 (58%)
|
|
write_4096 250 270 300 (63%) n.m. 440 (98%) 440 (98%)
|
|
write_8192 250 280 340 (60%) n.m. 490 (98%) 490 (98%)
|
|
rewrite_8192 250 290 380 (48%) n.m. 760 (100%) 560 (72%)
|
|
=
|
|
.T&
|
|
c s s s s s s
|
|
c s s s s s s
|
|
l | l s | l s | l s
|
|
l | l s | l s | l s
|
|
l | l s | l s | l s
|
|
l | c c | c c | c c
|
|
l | c c | c c | c c.
|
|
Logically Sequential Transfers
|
|
from an \fB4K/1K\fR 4.2BSD File System (Kbytes/sec.)
|
|
_
|
|
Test Inadequate Search Lead OK Search Lead OK Search Lead
|
|
Initial SBI Arbitration Init SBI Arb. Improved SBI Arb.
|
|
|
|
1 Drive 2 Drives 1 Drive 2 Drives 1 Drive 2 Drives
|
|
_
|
|
read_8192 200 220 280 n.m. 490 (77%) 370 (66%)
|
|
write_4096 180 190 300 n.m. 380 (98%) 370 (98%)
|
|
write_8192 180 200 320 n.m. 380 (99%) 370 (97%)
|
|
rewrite_8192 190 200 340 n.m. 490 (87%) 350 (66%)
|
|
.TE
|
|
.DE
|
|
.ds RH Conclusions
|
|
.bp
|