NetBSD/sys/arch/mips/include/locore.h

254 lines
7.2 KiB
C

/* $NetBSD: locore.h,v 1.40 2000/07/27 17:29:06 cgd Exp $ */
/*
* Copyright 1996 The Board of Trustees of The Leland Stanford
* Junior University. All Rights Reserved.
*
* Permission to use, copy, modify, and distribute this
* software and its documentation for any purpose and without
* fee is hereby granted, provided that the above copyright
* notice appear in all copies. Stanford University
* makes no representations about the suitability of this
* software for any purpose. It is provided "as is" without
* express or implied warranty.
*/
/*
* Jump table for MIPS cpu locore functions that are implemented
* differently on different generations, or instruction-level
* archtecture (ISA) level, the Mips family.
* The following functions must be provided for each mips ISA level:
*
*
* MachFlushCache
* MachFlushDCache
* MachFlushICache
* wbflush
* proc_trampoline()
* cpu_switch_resume()
*
* We currently provide support for MIPS I and MIPS III.
*/
#ifndef _MIPS_LOCORE_H
#define _MIPS_LOCORE_H
#ifndef _LKM
#include "opt_cputype.h"
#include "opt_mips_cache.h"
#endif
struct tlb;
/*
* locore service routine for exception vectors. Used outside locore
* only to print them by name in stack tracebacks
*/
u_int32_t mips_read_causereg(void);
u_int32_t mips_read_statusreg(void);
void mips1_ConfigCache(void);
void mips1_FlushCache(void);
void mips1_FlushDCache(vaddr_t addr, vsize_t len);
void mips1_FlushICache(vaddr_t addr, vsize_t len);
void mips1_SetPID(int pid);
void mips1_TBIA(int);
void mips1_TBIAP(int);
void mips1_TBIS(vaddr_t);
int mips1_TLBUpdate(u_int, u_int);
void mips1_wbflush(void);
void mips1_proc_trampoline(void);
void mips1_cpu_switch_resume(void);
void mips3_ConfigCache(void);
void mips3_FlushCache(void);
void mips3_FlushDCache(vaddr_t addr, vaddr_t len);
void mips3_FlushICache(vaddr_t addr, vaddr_t len);
void mips3_HitFlushDCache(vaddr_t, int);
void mips3_SetPID(int pid);
void mips3_TBIA(int);
void mips3_TBIAP(int);
void mips3_TBIS(vaddr_t);
int mips3_TLBUpdate(u_int, u_int);
void mips3_TLBRead(int, struct tlb *);
void mips3_SetWIRED(int);
void mips3_wbflush(void);
void mips3_proc_trampoline(void);
void mips3_cpu_switch_resume(void);
void mips3_FlushCache_2way(void);
void mips3_FlushDCache_2way(vaddr_t addr, vaddr_t len);
void mips3_HitFlushDCache_2way(vaddr_t, int);
void mips3_FlushICache_2way(vaddr_t addr, vaddr_t len);
u_int32_t mips3_read_config(void);
u_int32_t mips3_cycle_count(void);
u_int32_t mips3_write_count(u_int32_t);
u_int32_t mips3_read_compare(void);
void mips3_write_config(u_int32_t);
void mips3_write_compare(u_int32_t);
void mips3_write_xcontext_upper(u_int32_t);
void mips3_clearBEV(void);
/*
* A vector with an entry for each mips-ISA-level dependent
* locore function, and macros which jump through it.
* XXX the macro names are chosen to be compatible with the old
* Sprite coding-convention names used in 4.4bsd/pmax.
*/
typedef struct {
void (*flushCache)(void);
void (*flushDCache)(vaddr_t addr, vsize_t len);
void (*flushICache)(vaddr_t addr, vsize_t len);
void (*setTLBpid)(int pid);
void (*TBIAP)(int);
void (*TBIS)(vaddr_t);
int (*tlbUpdate)(u_int highreg, u_int lowreg);
void (*wbflush)(void);
} mips_locore_jumpvec_t;
/* Override writebuffer-drain method. */
void mips_set_wbflush(void (*)(void));
/* stacktrace() -- print a stack backtrace to the console */
void stacktrace(void);
/* logstacktrace() -- log a stack traceback to msgbuf */
void logstacktrace(void);
/*
* The "active" locore-fuction vector, and
*/
extern mips_locore_jumpvec_t mips_locore_jumpvec;
extern mips_locore_jumpvec_t r2000_locore_vec;
extern mips_locore_jumpvec_t r4000_locore_vec;
extern long *mips_locoresw[];
#if defined(MIPS3) && !defined (MIPS1)
#if defined(MIPS3_5200)
#define MachFlushCache mips3_FlushCache_2way
#define MachFlushDCache mips3_FlushDCache_2way
#define MachHitFlushDCache mips3_HitFlushDCache_2way
#define MachFlushICache mips3_FlushICache_2way
#else
#define MachFlushCache mips3_FlushCache
#if defined(MIPS3_L2CACHE_ABSENT) && defined(MIPS3_4100)
#define MachFlushDCache mips3_FlushDCache /* VR4100 */
#elif !defined(MIPS3_L2CACHE_ABSENT) && defined(MIPS3_L2CACHE_PRESENT)
#define MachFlushDCache mips3_FlushDCache
#else
#define MachFlushDCache (*(mips_locore_jumpvec.flushDCache))
#endif
#define MachHitFlushDCache mips3_HitFlushDCache
#define MachFlushICache mips3_FlushICache
#endif
#define MachSetPID mips3_SetPID
#define MIPS_TBIAP() mips3_TBIAP(mips_num_tlb_entries)
#define MIPS_TBIS mips3_TBIS
#define MachTLBUpdate mips3_TLBUpdate
#define wbflush() mips3_wbflush()
#define proc_trampoline mips3_proc_trampoline
#endif
#if !defined(MIPS3) && defined (MIPS1)
#define MachFlushCache mips1_FlushCache
#define MachFlushDCache mips1_FlushDCache
#define MachFlushICache mips1_FlushICache
#define MachSetPID mips1_SetPID
#define MIPS_TBIAP() mips1_TBIAP(mips_num_tlb_entries)
#define MIPS_TBIS mips1_TBIS
#define MachTLBUpdate mips1_TLBUpdate
#define wbflush() mips1_wbflush()
#define proc_trampoline mips1_proc_trampoline
#endif
#if defined(MIPS3) && defined (MIPS1)
#define MachFlushCache (*(mips_locore_jumpvec.flushCache))
#define MachFlushDCache (*(mips_locore_jumpvec.flushDCache))
#define MachFlushICache (*(mips_locore_jumpvec.flushICache))
#define MachSetPID (*(mips_locore_jumpvec.setTLBpid))
#define MIPS_TBIAP() (*(mips_locore_jumpvec.TBIAP))(mips_num_tlb_entries)
#define MIPS_TBIS (*(mips_locore_jumpvec.TBIS))
#define MachTLBUpdate (*(mips_locore_jumpvec.tlbUpdate))
#define MachHitFlushDCache mips3_HitFlushDCache
#define wbflush() (*(mips_locore_jumpvec.wbflush))()
#define proc_trampoline (mips_locoresw[1])
#endif
#define CPU_IDLE (mips_locoresw[2])
/* cpu_switch_resume is called inside locore.S */
/*
* CPU identification, from PRID register.
*/
typedef int mips_prid_t;
#define MIPS_PRID_REV(x) (((x) >> 0) & 0x00ff)
#define MIPS_PRID_IMPL(x) (((x) >> 8) & 0x00ff)
#define MIPS_PRID_RSVD(x) (((x) >> 16) & 0xffff)
#define MIPS_PRID_REV_MIN(x) ((MIPS_PRID_REV(x) >> 0) & 0x0f)
#define MIPS_PRID_REV_MAJ(x) ((MIPS_PRID_REV(x) >> 4) & 0x0f)
#ifdef _KERNEL
/*
* Global variables used to communicate CPU type, and parameters
* such as cache size, from locore to higher-level code (e.g., pmap).
*/
extern mips_prid_t cpu_id;
extern mips_prid_t fpu_id;
extern int cpu_arch;
extern int mips_num_tlb_entries;
extern u_int mips_L1DCacheSize;
extern u_int mips_L1ICacheSize;
extern u_int mips_L1DCacheLSize;
extern u_int mips_L1ICacheLSize;
extern int mips_L2CachePresent;
extern u_int mips_L2CacheLSize;
extern u_int mips_CacheAliasMask;
extern u_int mips_CachePreferMask;
#ifdef MIPS3
extern int mips3_L1TwoWayCache;
extern int mips3_cacheflush_bug;
#endif /* MIPS3 */
/*
* trapframe argument passed to trap()
*/
struct trapframe {
mips_reg_t tf_regs[17];
mips_reg_t tf_ra;
mips_reg_t tf_sr;
mips_reg_t tf_mullo;
mips_reg_t tf_mulhi;
mips_reg_t tf_epc; /* may be changed by trap() call */
};
/*
* Stack frame for kernel traps. four args passed in registers.
* A trapframe is pointed to by the 5th arg, and a dummy sixth argument
* is used to avoid alignment problems
*/
struct kernframe {
register_t cf_args[4 + 1];
register_t cf_pad; /* (for 8 word alignment) */
register_t cf_sp;
register_t cf_ra;
struct trapframe cf_frame;
};
#endif
#endif /* _MIPS_LOCORE_H */