NetBSD/sys/dev/pci
fvdl 7b10c3e7e4 Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
..
Makefile
Makefile.pcidevs
README
adv_pci.c Remove Wide boards references 1998-09-26 15:52:55 +00:00
adw_pci.c Change sources to be KNF 1998-09-26 19:53:34 +00:00
ahc_pci.c
bha_pci.c
com_puc.c
cy_pci.c
devlist2h.awk
eap.c
files.pci Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename 1998-11-04 00:29:28 +00:00
i82365_pci.c
if_de.c Fix transmit underflow messages. (\0128 != \0 128) 1998-09-25 18:06:53 +00:00
if_devar.h Invert the RXCOPY test. Note that most new platforms will not 1998-09-29 22:40:52 +00:00
if_en_pci.c
if_ep_pci.c Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename 1998-11-04 00:29:28 +00:00
if_epic_pci.c
if_esh_pci.c
if_ex_pci.c Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename 1998-11-04 00:29:28 +00:00
if_fpa.c
if_fxp.c Add support for the Seeq 80c24 AutoDUPLEX media interface which was nuked 1998-11-03 05:47:38 +00:00
if_fxpreg.h
if_fxpvar.h
if_le_pci.c Add missing field to le_softc structure, missed in previous commit. Name 1998-10-02 00:20:52 +00:00
if_levar.h Add missing field to le_softc structure, missed in previous commit. Name 1998-10-02 00:20:52 +00:00
if_ne_pci.c Use the rtl80x9 common code for media selection. 1998-10-31 00:45:48 +00:00
if_ntwoc_pci.c
if_ntwoc_pcireg.h
if_tl.c Manuel confirms that defaulting to AUTO is ok, to Do It. 1998-10-30 23:30:16 +00:00
if_tlregs.h
if_tlvar.h
isp_pci.c dma setup now returns CMD_QUEUED or CMD_COMPLETE. Clarify a ternary 1998-09-17 23:10:20 +00:00
lpt_puc.c
ncr.c Garbage-collect the open_target_lu and close_target_lu entry points from 1998-10-10 00:28:28 +00:00
ncrreg.h
ncrstat.c
ohci_pci.c
pci.c
pci_map.c
pci_quirks.c
pci_subr.c
pcidevs Add RealTek 8129 and 8139 10/100Mb Ethernet IDs. 1998-10-20 01:38:57 +00:00
pcidevs.h Regen. 1998-10-20 01:39:41 +00:00
pcidevs_data.h Regen. 1998-10-20 01:39:41 +00:00
pciide.c Add config flags for pciide: 0x001 forces the use of DMA when the driver 1998-10-22 15:11:39 +00:00
pciide_apollo_reg.h Fix a comment. 1998-10-19 12:26:22 +00:00
pciide_cmd_reg.h Merge bouyer-ide 1998-10-12 16:09:10 +00:00
pciide_piix_reg.h Merge bouyer-ide 1998-10-12 16:09:10 +00:00
pciidereg.h Merge bouyer-ide 1998-10-12 16:09:10 +00:00
pciidevar.h Merge bouyer-ide 1998-10-12 16:09:10 +00:00
pcireg.h
pcivar.h
ppb.c
ppbreg.h
puc.c
pucdata.c
pucvar.h
tga.c
tga_bt463.c
tga_bt485.c
tga_conf.c
tgareg.h
tgavar.h
uhci_pci.c
vga_pci.c
vga_pcivar.h
wdc_pciide.c

README

$NetBSD: README,v 1.3 1998/08/15 03:02:46 mycroft Exp $

This directory contains files which are used during PCI configuration
and PCI device drivers.  Eventually, most of the device drivers and
some of the configuration support should become machine-independent
and be moved to a more general location.

The configuration support was implemented according to the `PCI Local
Bus Specification, Production Version, Revision 2.0' dated April 30,
1993.  Section numbers referred to in the code may be specific to that
edition of the specification.

Some attempt has been made to insure that the code works on rogue
machines where the BIOS doesn't do its job, but in general I can't
guarantee that.

--
- Charles M. Hannum
  NetBSD group
  August 8, 1994